Add option parser for disassembler, and refine the codes of
parse register operand and disassemble register operand.
While strengthen the operands legality check of some instructions.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (parse_type_ctrlreg): Use function
csky_get_control_regno to operand.
(csky_get_reg_val): Likewise.
(is_reg_sp_with_bracket): Use function csky_get_reg_val
to parse operand.
(is_reg_sp): Refine.
(is_oimm_within_range): Fix, report error when operand
is not constant.
(parse_type_cpreg): Refine.
(parse_type_cpcreg): Refine.
(get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS.
(md_assemble): Fix no error reporting somtimes when
operands number are not fit.
(csky_addc64): Refine.
(csky_subc64): Refine.
(csky_or64): Refine.
(v1_work_fpu_fo): Refine.
(v1_work_fpu_read): Refine.
(v1_work_fpu_writed): Refine.
(v1_work_fpu_readd): Refine.
(v2_work_addc): New function, strengthen the operands legality
check of addc.
* gas/testsuite/gas/csky/all.d : Use register number format when
disassemble register name by default.
* gas/testsuite/gas/csky/cskyv2_all.d : Likewise.
* gas/testsuite/gas/csky/trust.d: Likewise.
* gas/testsuite/gas/csky/cskyv2_ck860.d : Fix.
* gas/testsuite/gas/csky/trust.s : Fix.
opcodes/
* csky-dis.c (using_abi): New.
(parse_csky_dis_options): New function.
(get_gr_name): New function.
(get_cr_name): New function.
(csky_output_operand): Use get_gr_name and get_cr_name to
disassemble and add handle of OPRND_TYPE_IMM5b_LS.
(print_insn_csky): Parse disassembler options.
* opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum.
(GENARAL_REG_BANK): Define.
(REG_SUPPORT_ALL): Define.
(REG_SUPPORT_ALL): New.
(ASH): Define.
(REG_SUPPORT_A): Define.
(REG_SUPPORT_B): Define.
(REG_SUPPORT_C): Define.
(REG_SUPPORT_D): Define.
(REG_SUPPORT_E): Define.
(csky_abiv1_general_regs): New.
(csky_abiv1_control_regs): New.
(csky_abiv2_general_regs): New.
(csky_abiv2_control_regs): New.
(get_register_name): New function.
(get_register_number): New function.
(csky_get_general_reg_name): New function.
(csky_get_general_regno): New function.
(csky_get_control_reg_name): New function.
(csky_get_control_regno): New function.
(csky_v2_opcodes): Prefer two oprerans format for bclri and
bseti, strengthen the operands legality check of addc, zext
and sext.
This patch corrects "size" and "bitsize" in R_RISCV_RVC_* reloc howtos
so that elfnn-riscv.c:perform_relocation doesn't access past the end
of a section. I've also corrected "size" in the R_RISCV_CALL* reloc
howtos since these relocs apply to two consecutive instructions. That
caused fallout in the assembler with complaints about "fixup not
contained within frag" due to tc-riscv.c:append_insn finishing off a
frag after the auipc insn making up a "call" macro. Which is a little
rude since the CALL reloc also relocates the following jalr. Fixed by
changing the frag handling a little.
I've also changed R_RISCV_ALIGN and R_RISCV_TPREL_ADD marker reloc
howtos to look like R_RISCV_NONE, and corrected dst_mask for numerous
relocs, not that it matters very much.
bfd/
PR 26569
* elfxx-riscv.c (howto_table): Correct size and bitsize of
R_RISCV_RVC_BRANCH, R_RISCV_RVC_JUMP, and R_RISCV_RVC_LUI.
Correct size for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPREL32,
R_RISCV_CALL, and R_RISCV_CALL_PLT. Make R_RISCV_TPREL_ADD and
R_RISCV_ALIGN like R_RISCV_NONE. Correct dst_mask many relocs.
gas/
* config/tc-riscv.c (append_insn): Don't tie off frags at CALL
relocs.
(riscv_call): Tie them off after the jalr.
(md_apply_fix): Zero fx_size of RELAX fixup.
Add gas and opcodes support for two xBPF-exclusive ALU operations:
SDIV (signed division) and SMOD (signed modulo), and add tests for
them in gas.
cpu/
* bpf.cpu (insn-op-code-alu): Add SDIV and SMOD.
(define-alu-insn-bin, daib): Take ISAs as an argument.
(define-alu-instructions): Update calls to daib pmacro with
ISAs; add sdiv and smod.
gas/
* testsuite/gas/bpf/alu-xbpf.d: New file.
* testsuite/gas/bpf/alu-xbpf.s: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testsuite/gas/bpf/alu32-xbpf.d: Likewise.
* testuiste/gas/bpf/bpf.exp: Run new tests.
opcodes/
* bpf-desc.c: Regenerate.
* bpf-desc.h: Likewise.
* bpf-opc.c: Likewise.
* bpf-opc.h: Likewise.
I removed a few too many parentheses in git commit 7af677524e. This
patch fixes that problem, rewriting the expression so it won't happen
again. The patch also avoids more UB with shifts of signed values.
PR 26610
* config/tc-arm.c (move_or_literal_pool): Correct extraction of
bignum. Use unsigned "v"
(is_double_a_single): Make "v" and "mantissa" unsigned. Formatting.
(double_to_single): Likewise.
* read.c (s_nop): New function. Handles the .nop directive.
(potable): Add entry for "nop".
(s_nops): Code tidy.
* read.h (s_nop): Add prototype.
* config/tc-bpf.h (md_single_noop_insn): Define.
* config/tc-mmix.h (md_single_noop_insn): Define.
* config/tc-or1k.h (md_single_noop_insn): Define.
* config/tc-s12z.c (md_assemble): Preserve the input line pointer,
rather than corrupting it.
* write.c (relax_segment): Update error message regarding
non-absolute values passed to .fill and .nops.
* NEWS: Mention the new directive.
* doc/as.texi: Document the new directive.
* doc/internals.texi: Document the new internal macros used to
implement the new directive.
* testsuite/gas/all/nop.s: New test.
* testsuite/gas/all/nop.d: New test control file.
* testsuite/gas/all/gas.exp: Run the new test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.s: New test.
* testsuite/gas/elf/dwarf-5-nop-for-line-table.d: New test
control file.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/i386/space1.l: Adjust expected output.
When -g was used to generate DWARF gas would error out when a .debug_line
already exists. But when a .debug_info section already exists it would
simply skip generating one without warning or error. Do the same for
.debug_line. It is only an error when the user explicitly uses .loc
directives and also generates the .debug_line table itself.
The tests are unfortunately arch specific because the line table is only
generated when actual instructions have been emitted. Use i386 because
that is probably the most used architecture. Before this patch the new
dwarf-line-2 testcase would fail, with this patch it succeeds (and doesn't
try to add its own line table).
gas/ChangeLog:
* as.texi (-g): Explicitly mention when .debug_info and .debug_line
are generated for the DWARF format.
(Loc): Add that it is an error to both use a .loc directive and
generate a .debug_line yourself.
* dwarf2dbg.c (dwarf2_any_loc_directive_seen): New static variable.
(dwarf2_directive_loc): Set dwarf2_any_loc_directive_seen to TRUE.
(dwarf2_finish): Check dwarf2_any_loc_directive_seen before emitting
an error. Only create .debug_line if it is empty (or doesn't exist).
* testsuite/gas/i386/i386.exp: Add dwarf2-line-{1,2,3,4} when testing
an elf target.
* testsuite/gas/i386/dwarf2-line-{1,2,3,4}.{s,d,l}: New test files.
Add arches CK804, CK805 and CK800. CK800 is an special arch which
support all instructions for CSKYV2. Refine the cpu tables to
simplify adding a new cpu.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (struct csky_cpu_info): Add new members
isa_flag, features and ver.
(struct csky_cpu_feature): New.
(struct csky_cpu_version): New.
(CSKY_FEATURE_MAX): Define.
(CSKY_CPU_REVERISON_MAX): Define.
(FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP,
FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD):
Define, each standard one collection of instructions.
(CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e,
CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v,
CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt,
CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv,
CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d,
CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft,
CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv,
CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv,
CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define,
the features combination used by cpu.
(CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0,
CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0,
CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3):
Define, version information used by cpu.
(csky_cpus): Refine, and add CK804, CK805 and CK800.
(parse_cpu): Refine.
(parse_arch): Refine.
(md_show_usage): Refine.
(md_begin): Refine.
include/
* opcode/csky.h (CSKY_ARCH_804): Define.
(CSKY_ARCH_805): Define.
(CSKY_ARCH_800): Define.
We don't support power10 on ppc32, mainly because some instructions
have 34-bit fields for which we don't have relocations on ppc32.
If you try to assemble typical code, you'll see errors saying
"reloc ... not supported by object file format". Also, on 32-bit
hosts with binutils configured without a 64-bit bfd, you'll see errors
saying "bignum invalid" when using large offsets. But let's not kill
output of prefix insns entirely on 32-bit hosts.
* config/tc-ppc.c (md_assemble): Emit prefix insn by parts when
valueT is smaller than 64 bits.
The option corresponds to GCC to control the float calling conversion,
and the value will be stored in .csky.attributes section.
Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com>
gas/
* config/tc-csky.c (float_abi): New.
(md_longopts): Add mfloat-abi.
(struct sky_option_value_table): New.
(csky_float_abis): New, the possible values for -mfloat-abi.
(parse_float_abi): New funtion.
(md_show_usage): Show help information for -mfloat-abi.
(set_csky_attribute): Store float-abi value.
Link-time relaxations of branches are common for MSP430, given that GCC
can generate pessimal branch instructions, and the
-mcode-region=either/-mdata-region=either options to shuffle sections
can further change the type of branch instruction required.
These relaxations can result in invalid code when .uleb128
directives, used in the .gcc_except_table section, are used to calculate
the distance between two labels. A value for the .uleb128 directive is
calculated at assembly-time, and can't be updated at link-time, even if
relaxation causes the distance between the labels to change.
This patch adds relocations for subtract expressions in .uleb128
directives, to allow the linker to re-calculate the value of these
expressions after relaxation has been performed.
bfd/ChangeLog:
* bfd-in2.h (bfd_reloc_code_real): Add
BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* elf32-msp430.c (msp430_elf_ignore_reloc): New.
(elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
(msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128.
(msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
(write_uleb128): New.
(msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
* libbfd.c (_bfd_write_unsigned_leb128): New.
* libbfd.h (_bfd_write_unsigned_leb128): New prototype.
Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
* reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128.
binutils/ChangeLog:
* readelf.c (target_specific_reloc_handling): Handle
R_MSP430{,X}_GNU_{SET,SUB}_ULEB128.
gas/ChangeLog:
* config/tc-msp430.c (msp430_insert_uleb128_fixes): New.
(msp430_md_end): Call msp430_insert_uleb128_fixes.
include/ChangeLog:
* elf/msp430.h (elf_msp430_reloc_type): Add
R_MSP430_GNU_{SET,SUB}_ULEB128.
(elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128.
ld/ChangeLog:
* testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests.
* testsuite/ld-msp430-elf/uleb128.s: New test.
* testsuite/ld-msp430-elf/uleb128_430.d: New test.
* testsuite/ld-msp430-elf/uleb128_430x.d: New test.
This adds support for the Arm Cortex-R82 CPU in AArch64 GAS. For more
information about this processor, see [0].
[0] : https://developer.arm.com/ip-products/processors/cortex-r/cortex-r82
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add Cortex-R82.
* doc/c-aarch64.texi: Document -mcpu=cortex-r82.
This patch adds support for the system registers introduced in Armv8-R
AArch64.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to
validation function.
(parse_sys_ins_reg): Likewise.
(print_operands): Pass CPU features to aarch64_print_operand().
* testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output.
* testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output.
* testsuite/gas/aarch64/v8-r-sysregs.d: New test.
* testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take
system register name in order to simplify validation for v8-R.
(aarch64_print_operand): Also take CPU feature set, as disassembly for
system registers now depends on arch variant.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (print_operands): Pass CPU features to
aarch64_print_operand().
* aarch64-opc.c (aarch64_print_operand): Use CPU features to determine
preferred disassembly of system registers.
(SR_RNG): Refactor to use new SR_FEAT2 macro.
(SR_FEAT2): New.
(SR_V8_1_A): New.
(SR_V8_4_A): New.
(SR_V8_A): New.
(SR_V8_R): New.
(SR_EXPAND_ELx): New.
(SR_EXPAND_EL12): New.
(aarch64_sys_regs): Specify which registers are only on
A-profile, add R-profile system registers.
(ENC_BARLAR): New.
(PRBARn_ELx): New.
(PRLARn_ELx): New.
(aarch64_sys_ins_reg_supported_p): Reject EL3 registers for
Armv8-R AArch64.
This patch adds the basic infrastructure needed to support Armv8-R in
AArch64 binutils: new command-line flags, new feature bits, a new BFD
architecture, and support for differentiating between architecture
variants in the disassembler.
The new command-line options added by this patch are -march=armv8-r in
GAS and -m aarch64:armv8-r in objdump.
The disassembler support is necessary since Armv8-R AArch64 introduces a
system register (VSCTLR_EL2) which shares an encoding with a different
system register (TTBR0_EL2) in Armv8-A. This also allows us to use the
correct preferred disassembly for the new DFB alias introduced in
Armv8-R.
bfd/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* archures.c (bfd_mach_aarch64_8R): New.
* bfd-in2.h: Regenerate.
* cpu-aarch64.c (bfd_aarch64_arch_v8_r): New.
(bfd_aarch64_arch_ilp32): Update tail pointer.
gas/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add armv8-r.
* doc/c-aarch64.texi: Document -march=armv8-r.
include/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_A): New.
(AARCH64_FEATURE_V8_R): New.
(AARCH64_ARCH_V8): Include new A-profile feature bit.
(AARCH64_ARCH_V8_R): New.
opcodes/ChangeLog:
2020-09-08 Alex Coplan <alex.coplan@arm.com>
* aarch64-dis.c (arch_variant): New.
(determine_disassembling_preference): Disassemble according to
arch variant.
(select_aarch64_variant): New.
(print_insn_aarch64): Set feature set.
* dwarf2dbg.c (add_line_strp): New function.
(out_dir_and_file_list): Take line_seg and sizeof_offset as
arguments, Use DW_FORM_line_strp for dir and file. Call
add_line_strp and set symbol offset for DWARF2_LINE_VERSION 5.
(out_debug_line): Call out_dir_and_file_list with line_seg and
sizeof_offset.
* gas/testsuite/gas/elf/dwarf-5-file0.d: Expect indirect line
strings.
* dwarf2dbg.c (DWARF2_RNGLISTS_VERSION): New constant.
(out_debug_ranges): Add ranges_sym argument and set it.
(out_debug_rnglists): New function.
(out_debug_info): Change ranges_seg argument to ranges_sym
and use it to set DW_AT_ranges value.
(dwarf2_finish): Remove ranges_seg, add ranges_sym. For
DWARF2_VERSION 5 call out_debug_rnglists.
Older DWARF versions used DW_FORM_data4 or DW_FORM_data8 for offsets
into sections for e.g. DW_AT_stmt_list ot DW_AT_ranges. But version 4
introduced a dedicated form for such section offsets. Make sure to emit
the proper form for newer DWARF versions.
gas/ChangeLog:
* dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_sec_offset for DWARF
version 4 or higher.
If bfd_vma is 32 bits, gcc complains about shift counts exceeding
width of the type.
* config/tc-pdp11.c (md_number_to_chars): Condition nbytes=8 code
on BFD64.
Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is
enabled by ck803r3, and it's still a part of enhance DSP instruction
set.
gas/
* config/tc-csky.c (csky_cpus): Add ck803r3.
(CSKY_ISA_803R3): Define.
(CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1.
include/
* opcode/csky.h (CSKYV2_ISA_3E3R3): Define.
opcodes/
* csky-opc.h (csky_v2_opcodes): Move divul and divsl
to CSKYV2_ISA_3E3R3 instruction set.
PR 26420
PR 26421
PR 26425
PR 26427
* config/tc-arm.c (struct arm_it): Make size, size_req, cond and
uncond_value unsigned.
(parse_vfp_reg_list): Make setmask unsigned, vpr_str_len size_t.
(parse_big_immediate): Cast generic_bignum elements to unsigned.
(encode_thumb32_immediate): Shift left 0xffU.
(double_to_single): Make sign unsigned. Tidy.
(move_or_literal_pool): Cast LITTLE_NUM elements to uint64_t or
valueT.
(vfp_or_neon_is_neon): Adjust inst.uncond_value expression.
(md_assemble): Likewise.
(handle_pred_state): Make cond unsigned.
(thumb32_negate_data_op): Make variables unsigned.
(md_apply_fix): Make value and newval unsigned, adjust uses.
This also fixes the packing of the nibble buffer, which contains
rubbish in the top 4 bits of each element.
PR 26510
* config/tc-z8k.c (buffer): Use unsigned char.
(apply_fix): Use unsigned char* pointers.
(build_bytes): Likewise and mask nibbles when packing.
