PR 26253
gas * config/obj-elf.c (obj_elf_section): Accept a numeric value for
the "o" section flag. Interpret it as a section index. Allow an
index of zero.
* doc/as.texi: Document the new behaviour.
* NEWS: Mention the new feature. Tidy entries.
* testsuite/gas/elf/sh-link-zero.s: New test.
* testsuite/gas/elf/sh-link-zero.d: New test driver.
* testsuite/gas/elf/elf.exp: Run the new test.
* testsuite/gas/elf/section21.l: Updated expected assembler
output.
bfd * elf.c (_bfd_elf_setup_sections): Do not complain about an
sh_link value of zero when the SLF_LINK_ORDER flag is set.
(assign_section_numbers): Likewise.
PR 26681
bfd * elflink.c (bfd_elf_gc_sections): Do not arbitrarily keep note
sections which are linked to another section.
ld * testsuite/ld-elf/pr26681.s: New test.
* testsuite/ld-elf/pr26681.d: New test driver.
* testsuite/ld-elf/pr26681.l: New test output.
Some missing NULL checks meant a stub for a local symbol used a stub
looking like the __tls_get_addr_opt stub.
PR 26656
* elf64-ppc.c (ppc_build_one_stub, ppc_size_one_stub): Check for
NULL stub_entry->h before calling is_tls_get_addr.
The save of r2 in __glink_PLTresolve is the culprit. Remove it,
unless we know we need it for --plt-localentry. --plt-localentry
should not be used with power10 pc-relative code that makes tail
calls.
The patch also removes use of r2 as a scratch reg in the ELFv2
__glink_PLTresolve. Using r2 isn't a problem, this is just reducing
the number of scratch regs.
bfd/
* elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Depend on has_plt_localentry0.
(LD_R0_0R11, ADD_R11_R0_R11): Define.
(ppc64_elf_tls_setup): Disable params->plt_localentry0 when power10
code detected.
(ppc64_elf_size_stubs): Update __glink_PLTresolve eh_frame.
(ppc64_elf_build_stubs): Move r2 save to start of __glink_PLTresolve,
and only emit for has_plt_localentry0. Don't use r2 in the stub.
ld/
* testsuite/ld-powerpc/elfv2so.d,
* testsuite/ld-powerpc/notoc2.d,
* testsuite/ld-powerpc/tlsdesc.wf,
* testsuite/ld-powerpc/tlsdesc2.d,
* testsuite/ld-powerpc/tlsdesc2.wf,
* testsuite/ld-powerpc/tlsopt5.d,
* testsuite/ld-powerpc/tlsopt5.wf,
* testsuite/ld-powerpc/tlsopt6.d,
* testsuite/ld-powerpc/tlsopt6.wf: Update __glink_PLTresolve.
This adds missing support for a power10 version of the __tls_get_addr
call stub implementing DT_PPC64_OPT PPC64_OPT_TLS. Without this,
power10 code using __tls_get_addr fails miserably at runtime unless
the --no-tls-get-addr-optimize option is given.
PR 26656
* elf64-ppc.c (plt_stub_size): Add "odd" param. Use it with
size_power10_offset rather than calculating from start of stub.
Add size for notoc tls_get_addr_opt stub.
(plt_stub_pad): Add "odd" param, pass to plt_stub_size.
(build_tls_get_addr_head, build_tls_get_addr_tail): New functions.
(build_tls_get_addr_stub): Delete.
(ppc_build_one_stub): Use a temp for htab->params->stub_bfd.
Emit notoc tls_get_addr_opt stub. Move eh_frame code to
suit. Adjust code to use bfd_tls_get_addr_head/tail in place
of build_tls_get_addr_stub.
(ppc_size_one_stub): Size notoc tls_get_addr_opt stub.
Adjust plt_stub_size and plt_stub_pad calls. Correct "odd"
when padding stub. Size eh_frame for notoc stub too.
Correct lr_restore value.
(ppc64_elf_relocate_section): Don't skip over first insn of
notoc tls_get_addr_opt stub.
Some of the powerpc64 code editing functions are better run after
dynamic symbols have stabilised in order to make proper decisions
based on SYMBOL_REFERENCES_LOCAL. The dynamic symbols are processed
early in bfd_elf_size_dynamic_sections, before the backend
always_size_sections function is called.
One function, ppc64_elf_tls_setup must run before
bfd_elf_size_dynamic_sections because it changes dynamic symbols.
ppc64_elf_edit_opd and ppc64_elf_inline_plt can run early or late, I
think. ppc64_elf_tls_optimize and ppc64_elf_edit_toc are better run
later.
So this patch arranges to call some edit functions later via
always_size_sections.
PR 26655
bfd/
* elf64-ppc.c (ppc64_elf_func_desc_adjust): Rename to..
(ppc64_elf_edit): Call params->edit.
(ppc64_elf_tls_setup): Don't call _bfd_elf_tls_setup. Return a
bfd_boolean.
* elf64-ppc.h (struct ppc64_elf_params): Add "edit".
(ppc64_elf_tls_setup): Update declaration.
ld/
* emultempl/ppc64elf.em (params): Add ppc_edit.
(ppc_before_allocation): Split off some edit functions to..
(ppc_edit): ..this, new function.
This patch corrects "size" and "bitsize" in R_RISCV_RVC_* reloc howtos
so that elfnn-riscv.c:perform_relocation doesn't access past the end
of a section. I've also corrected "size" in the R_RISCV_CALL* reloc
howtos since these relocs apply to two consecutive instructions. That
caused fallout in the assembler with complaints about "fixup not
contained within frag" due to tc-riscv.c:append_insn finishing off a
frag after the auipc insn making up a "call" macro. Which is a little
rude since the CALL reloc also relocates the following jalr. Fixed by
changing the frag handling a little.
I've also changed R_RISCV_ALIGN and R_RISCV_TPREL_ADD marker reloc
howtos to look like R_RISCV_NONE, and corrected dst_mask for numerous
relocs, not that it matters very much.
bfd/
PR 26569
* elfxx-riscv.c (howto_table): Correct size and bitsize of
R_RISCV_RVC_BRANCH, R_RISCV_RVC_JUMP, and R_RISCV_RVC_LUI.
Correct size for R_RISCV_TLS_DTPMOD32, R_RISCV_TLS_DTPREL32,
R_RISCV_CALL, and R_RISCV_CALL_PLT. Make R_RISCV_TPREL_ADD and
R_RISCV_ALIGN like R_RISCV_NONE. Correct dst_mask many relocs.
gas/
* config/tc-riscv.c (append_insn): Don't tie off frags at CALL
relocs.
(riscv_call): Tie them off after the jalr.
(md_apply_fix): Zero fx_size of RELAX fixup.
Not sure why there wasn't a NULL check in the ld/22269 patch
(e01c16a8) at the time, as there was one for the corresponding patch
to elf32-m68k.c (5056ba1d).
Incidentally, I had missed that in 2017, as a prerequisite for the
ld/22269 series, the check_relocs function finally were made "safe"!
(I.e. the number of references and symbol types are final, garbage
collection done, so port-specific accounting can be made sanely.)
Committed.
bfd:
PR ld/26589
* elf32-cris.c (cris_elf_check_relocs): Add missing NULL check
on argument before calling UNDEFWEAK_NO_DYNAMIC_RELOC.
ld:
PR ld/26589
* testsuite/ld-elf/pr26589.d, testsuite/ld-elf/locref3.s: New test.
The symbol string table in the .symtab section is optional and cosmetic.
The contents of the .symtab section have no impact on run-time execution.
The symbol names in the symbol string table help distinguish addresses at
different locations. Add a linker option, -z unique-symbol, to avoid
duplicated local symbol names in the symbol string table.
This feature was well received by the livepatch maintainers. It not only
solves the duplicated local symbol name problem, but also would allow
livepatch to more precisely locate duplicate symbols in general for
patching.
bfd/
PR ld/26391
* elflink.c (elf_final_link_info): Add local_hash_table.
(local_hash_entry): New.
(local_hash_newfunc): Likewise.
(elf_link_output_symstrtab): Append ".COUNT" to duplicated local
symbols.
(bfd_elf_final_link): Initialize and free local_hash_table for
"-z unique-symbol".
include/
PR ld/26391
* bfdlink.h (bfd_link_info): Add unique_symbol.
ld/
PR ld/26391
* NEWS: Mention "-z unique-symbol".
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Handle
"-z unique-symbol" and "-z nounique-symbol".
* ld.texi: Document "-z unique-symbol" and "-z nounique-symbol".
* lexsup.c (elf_static_list_options): Add "-z unique-symbol" and
"-z nounique-symbol".
* testsuite/ld-elf/elf.exp: Add PR ld/26391 tests.
* testsuite/ld-elf/pr26391.nd: New file.
* testsuite/ld-elf/pr26391.out: Likewise.
* testsuite/ld-elf/pr26391a.c: Likewise.
* testsuite/ld-elf/pr26391b.c: Likewise.
* testsuite/ld-elf/pr26391c.c: Likewise.
* testsuite/ld-elf/pr26391d.c: Likewise.
The fix in 7e05773767 introduced a PLT
for conditional jumps when the target symbol is undefined. This is
incorrect because conditional branch relocations are not allowed to
clobber IP0/IP1 and hence, should not result in a dynamic relocation.
Revert that change and in its place, issue an error when the target
symbol is undefined.
bfd/
2020-09-10 Siddhesh Poyarekar <siddesh.poyarekar@arm.com>
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Revert
changes in 7e05773767. Set
error for undefined symbol in BFD_RELOC_AARCH64_BRANCH19 and
BFD_RELOC_AARCH64_TSTBR14 relocations.
ld/
2020-09-10 Siddhesh Poyarekar <siddesh.poyarekar@arm.com>
* testsuite/ld-aarch64/emit-relocs-560.d: Expect error instead
of valid output.
