/* Subroutines for assembler code output on the NS32000.
   Copyright (C) 1988 Free Software Foundation, Inc.

This file is part of GNU CC.

GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING.  If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */

/* Some output-actions in ns32k.md need these.  */
#include <stdio.h>
#include "config.h"
#include "rtl.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "real.h"
#include "insn-config.h"
#include "conditions.h"
#include "insn-flags.h"
#include "output.h"
#include "insn-attr.h"

#ifdef OSF_OS
int ns32k_num_files = 0;
#endif

void
trace (s, s1, s2)
     char *s, *s1, *s2;
{
    fprintf (stderr, s, s1, s2);
}

/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. */ 

int
hard_regno_mode_ok( regno, mode )
int regno;
int mode;
{
	switch( mode ) {
		case QImode:
		case HImode:
		case PSImode:
		case SImode:
		case PDImode:
		case VOIDmode:
		case BLKmode:
			if( (regno < 8) || (regno == 16) || (regno == 17) ) {
				return( 1 );
			}
			else {
				return( 0 );
			}

		case DImode:
			if( (regno < 8) && ((regno & 1) == 0) ) {
				return( 1 );
			}
			else {
				return( 0 );
			}


		case SFmode:
		case SCmode:
			if( TARGET_32081 ) {
				if( regno < 16 ) {
					return( 1 );
				}
				else {
					return( 0 );
				}
			}
			else {
				if( regno < 8 ) {
					return( 1 );
				}
				else {
					return( 0 );
				}
			}

		case DFmode:
		case DCmode:
			if( (regno & 1) == 0 ) {
				if( TARGET_32081 ) {
					if( regno < 16 ) {
						return( 1 );
					}
					else {
						return( 0 );
					}
				}
				else {
					if( regno < 8 ) {
						return( 1 );
					}
					else {
						return( 0 );
					}
				}
			}
			else {
				return( 0 );
			}
 
		case XFmode:
			abort( 0 );
		case CCmode:
			abort( 0 );
		case TImode:
			abort( 0 );
		case XCmode:	
			abort( 0 );
		case TFmode:
			abort( 0 );
		case TCmode:
			abort( 0 );


		default:
			fprintf( stderr, "cant match mode %d\n", mode );
			abort( 0 );
	}
	abort(0);
}

/* ADDRESS_COST calls this.  This function is not optimal
   for the 32032 & 32332, but it probably is better than
   the default. */

int
calc_address_cost (operand)
     rtx operand;
{
  int i;
  int cost = 0;
  
  if (GET_CODE (operand) == MEM)
    cost += 3;
  if (GET_CODE (operand) == MULT)
    cost += 2;
#if 0
  if (GET_CODE (operand) == REG)
    cost += 1;			/* not really, but the documentation
				   says different amount of registers
				   shouldn't return the same costs */
#endif
  switch (GET_CODE (operand))
    {
    case REG:
    case CONST:
    case CONST_INT:
    case CONST_DOUBLE:
    case SYMBOL_REF:
    case LABEL_REF:
    case POST_DEC:
    case PRE_DEC:
      break;
    case MULT:
    case MEM:
    case PLUS:
      for (i = 0; i < GET_RTX_LENGTH (GET_CODE (operand)); i++)
	{
	  cost += calc_address_cost (XEXP (operand, i));
	}
    default:
      break;
    }
  return cost;
}

/* Return the register class of a scratch register needed to copy IN into
   or out of a register in CLASS in MODE.  If it can be done directly,
   NO_REGS is returned.  */

enum reg_class
secondary_reload_class (class, mode, in)
     enum reg_class class;
     enum machine_mode mode;
     rtx in;
{
  int regno = true_regnum (in);

  if (regno >= FIRST_PSEUDO_REGISTER)
    regno = -1;

  /* We can place anything into GENERAL_REGS and can put GENERAL_REGS
     into anything.  */
  if (class == GENERAL_REGS || (regno >= 0 && regno < 8))
    return NO_REGS;

  /* Constants, memory, and FP registers can go into FP registers */
  if ((regno == -1 || (regno >= 8 && regno < 16)) && (class == FLOAT_REGS))
    return NO_REGS;

  /* Otherwise, we need GENERAL_REGS. */
  return GENERAL_REGS;
}
/* Generate the rtx that comes from an address expression in the md file */
/* The expression to be build is BASE[INDEX:SCALE].  To recognize this,
   scale must be converted from an exponent (from ASHIFT) to a
   multiplier (for MULT). */
rtx
gen_indexed_expr (base, index, scale)
     rtx base, index, scale;
{
  rtx addr;

  /* This generates an illegal addressing mode, if BASE is
     fp or sp.  This is handled by PRINT_OPERAND_ADDRESS.  */
  if (GET_CODE (base) != REG && GET_CODE (base) != CONST_INT)
    base = gen_rtx (MEM, SImode, base);
  addr = gen_rtx (MULT, SImode, index,
		  gen_rtx (CONST_INT, VOIDmode, 1 << INTVAL (scale)));
  addr = gen_rtx (PLUS, SImode, base, addr);
  return addr;
}

/* Return 1 if OP is a valid operand of mode MODE.  This
   predicate rejects operands which do not have a mode
   (such as CONST_INT which are VOIDmode).  */
int
reg_or_mem_operand (op, mode)
     register rtx op;
     enum machine_mode mode;
{
  return (GET_MODE (op) == mode
	  && (GET_CODE (op) == REG
	      || GET_CODE (op) == SUBREG
	      || GET_CODE (op) == MEM));
}

/* Return the best assembler insn template
   for moving operands[1] into operands[0] as a fullword.  */

static char *
singlemove_string (operands)
     rtx *operands;
{
  if (GET_CODE (operands[1]) == CONST_INT
      && INTVAL (operands[1]) <= 7
      && INTVAL (operands[1]) >= -8)
    return "movqd %1,%0";
  return "movd %1,%0";
}

char *
output_move_double (operands)
     rtx *operands;
{
  enum anon1 { REGOP, OFFSOP, POPOP, CNSTOP, RNDOP } optype0, optype1;
  rtx latehalf[2];

  /* First classify both operands.  */

  if (REG_P (operands[0]))
    optype0 = REGOP;
  else if (offsettable_memref_p (operands[0]))
    optype0 = OFFSOP;
  else if (GET_CODE (XEXP (operands[0], 0)) == PRE_DEC)
    optype0 = POPOP;
  else
    optype0 = RNDOP;

  if (REG_P (operands[1]))
    optype1 = REGOP;
  else if (CONSTANT_ADDRESS_P (operands[1])
	   || GET_CODE (operands[1]) == CONST_DOUBLE)
    optype1 = CNSTOP;
  else if (offsettable_memref_p (operands[1]))
    optype1 = OFFSOP;
  else if (GET_CODE (XEXP (operands[1], 0)) == PRE_DEC)
    optype1 = POPOP;
  else
    optype1 = RNDOP;

  /* Check for the cases that the operand constraints are not
     supposed to allow to happen.  Abort if we get one,
     because generating code for these cases is painful.  */

  if (optype0 == RNDOP || optype1 == RNDOP)
    abort ();

  /* Ok, we can do one word at a time.
     Normally we do the low-numbered word first,
     but if either operand is autodecrementing then we
     do the high-numbered word first.

     In either case, set up in LATEHALF the operands to use
     for the high-numbered word and in some cases alter the
     operands in OPERANDS to be suitable for the low-numbered word.  */

  if (optype0 == REGOP)
    latehalf[0] = gen_rtx (REG, SImode, REGNO (operands[0]) + 1);
  else if (optype0 == OFFSOP)
    latehalf[0] = adj_offsettable_operand (operands[0], 4);
  else
    latehalf[0] = operands[0];

  if (optype1 == REGOP)
    latehalf[1] = gen_rtx (REG, SImode, REGNO (operands[1]) + 1);
  else if (optype1 == OFFSOP)
    latehalf[1] = adj_offsettable_operand (operands[1], 4);
  else if (optype1 == CNSTOP)
    {
      if (CONSTANT_ADDRESS_P (operands[1]))
	latehalf[1] = const0_rtx;
      else if (GET_CODE (operands[1]) == CONST_DOUBLE)
	split_double (operands[1], &operands[1], &latehalf[1]);
    }
  else
    latehalf[1] = operands[1];

  /* If one or both operands autodecrementing,
     do the two words, high-numbered first.  */

  if (optype0 == POPOP || optype1 == POPOP)
    {
      output_asm_insn (singlemove_string (latehalf), latehalf);
      return singlemove_string (operands);
    }

  /* Not autodecrementing.  Do the two words, low-numbered first.  */

  output_asm_insn (singlemove_string (operands), operands);

  operands[0] = latehalf[0];
  operands[1] = latehalf[1];
  return singlemove_string (operands);
}

int
check_reg (oper, reg)
     rtx oper;
     int reg;
{
  register int i;

  if (oper == 0)
    return 0;
  switch (GET_CODE(oper))
    {
    case REG:
      return (REGNO(oper) == reg) ? 1 : 0;
    case MEM:
      return check_reg(XEXP(oper, 0), reg);
    case PLUS:
    case MULT:
      return check_reg(XEXP(oper, 0), reg) || check_reg(XEXP(oper, 1), reg);
    }
  return 0;
}

/* PRINT_OPERAND is defined to call this function,
   which is easier to debug than putting all the code in
   a macro definition in ns32k.h.  */

void
print_operand (file, x, code)
     FILE *file;
     rtx x;
     char code;
{
  if (code == '$')
    PUT_IMMEDIATE_PREFIX (file);
  else if (code == '?')
    PUT_EXTERNAL_PREFIX (file);
  else if (GET_CODE (x) == REG)
    fprintf (file, "%s", reg_names[REGNO (x)]);
  else if (GET_CODE (x) == MEM)
    {
      rtx tmp = XEXP (x, 0);
#if ! (defined (PC_RELATIVE) || defined (NO_ABSOLUTE_PREFIX_IF_SYMBOLIC))
      if (GET_CODE (tmp) != CONST_INT)
	{
	  char *out = XSTR (tmp, 0);
	  if (out[0] == '*')
	    {
	      PUT_ABSOLUTE_PREFIX (file);
	      fprintf (file, "%s", &out[1]);
	    }
	  else
	    ASM_OUTPUT_LABELREF (file, out);
	}
      else
#endif
	output_address (XEXP (x, 0));
    }
  else if (GET_CODE (x) == CONST_DOUBLE && GET_MODE (x) != DImode)
    {
      if (GET_MODE (x) == DFmode)
	{ 
	  union { double d; int i[2]; } u;
	  u.i[0] = CONST_DOUBLE_LOW (x); u.i[1] = CONST_DOUBLE_HIGH (x);
	  PUT_IMMEDIATE_PREFIX(file);
#ifdef SEQUENT_ASM
	  /* Sequent likes it's floating point constants as integers */
	  fprintf (file, "0Dx%08x%08x", u.i[1], u.i[0]);
#else
#ifdef ENCORE_ASM
	  fprintf (file, "0f%.20e", u.d); 
#else
	  fprintf (file, "0d%.20e", u.d); 
#endif
#endif
	}
      else
	{ 
	  union { double d; int i[2]; } u;
	  u.i[0] = CONST_DOUBLE_LOW (x); u.i[1] = CONST_DOUBLE_HIGH (x);
	  PUT_IMMEDIATE_PREFIX (file);
#ifdef SEQUENT_ASM
	  /* We have no way of winning if we can't get the bits
	     for a sequent floating point number.  */
#if HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT
	  abort ();
#endif
	  {
	    union { float f; long l; } uu;
	    uu.f = u.d;
	    fprintf (file, "0Fx%08x", uu.l);
	  }
#else
	  fprintf (file, "0f%.20e", u.d); 
#endif
	}
    }
  else
    {
#ifndef NO_IMMEDIATE_PREFIX_IF_SYMBOLIC
      if (GET_CODE (x) == CONST_INT)
#endif
	PUT_IMMEDIATE_PREFIX(file);
      output_addr_const (file, x);
    }
}

/* PRINT_OPERAND_ADDRESS is defined to call this function,
   which is easier to debug than putting all the code in
   a macro definition in ns32k.h .  */

/* Completely rewritten to get this to work with Gas for PC532 Mach.
   This function didn't work and I just wasn't able (nor very willing) to
   figure out how it worked.
   90-11-25 Tatu Yl|nen <ylo@cs.hut.fi> */

print_operand_address (file, addr)
     register FILE *file;
     register rtx addr;
{
  static char scales[] = { 'b', 'w', 'd', 0, 'q', };
  rtx offset, base, indexexp, tmp;
  int scale;

  if (GET_CODE (addr) == PRE_DEC || GET_CODE (addr) == POST_DEC)
    {
      fprintf (file, "tos");
      return;
    }

  offset = NULL;
  base = NULL;
  indexexp = NULL;
  while (addr != NULL)
    {
      if (GET_CODE (addr) == PLUS)
	{
	  if (GET_CODE (XEXP (addr, 0)) == PLUS)
	    {
	      tmp = XEXP (addr, 1);
	      addr = XEXP (addr, 0);
	    }
	  else
	    {
	      tmp = XEXP (addr,0);
	      addr = XEXP (addr,1);
	    }
	}
      else
	{
	  tmp = addr;
	  addr = NULL;
	}
      switch (GET_CODE (tmp))
	{
	case PLUS:
	  abort ();
	case MEM:
	  if (base)
	    {
	      indexexp = base;
	      base = tmp;
	    }
	  else
	    base = tmp;
	  break;
	case REG:
	  if (REGNO (tmp) < 8)
	    if (base)
	      {
		indexexp = tmp;
	      }
	    else
	      base = tmp;
	  else
	    if (base)
	      {
		indexexp = base;
		base = tmp;
	      }
	    else
	      base = tmp;
	  break;
	case MULT:
	  indexexp = tmp;
	  break;
	case CONST:
	case CONST_INT:
	case SYMBOL_REF:
	case LABEL_REF:
	  if (offset)
	    offset = gen_rtx (PLUS, SImode, tmp, offset);
	  else
	    offset = tmp;
	  break;
	default:
	  abort ();
	}
    }
  if (! offset)
    offset = const0_rtx;

#ifdef INDEX_RATHER_THAN_BASE
  /* This is a re-implementation of the SEQUENT_ADDRESS_BUG fix.  */
  if (base && !indexexp && GET_CODE (base) == REG
      && REG_OK_FOR_INDEX_P (REGNO (base))
    {
      indexexp = base;
      base = 0;
    }
#endif

  /* now, offset, base and indexexp are set */
  if (! base)
    {
#if defined (PC_RELATIVE) || defined (NO_ABSOLUTE_PREFIX_IF_SYMBOLIC)
      if (GET_CODE (offset) == CONST_INT)
/*      if (! (GET_CODE (offset) == LABEL_REF
	     || GET_CODE (offset) == SYMBOL_REF)) */
#endif
	PUT_ABSOLUTE_PREFIX (file);
    }

  output_addr_const (file, offset);
  if (base) /* base can be (REG ...) or (MEM ...) */
    switch (GET_CODE (base))
      {
	/* now we must output base.  Possible alternatives are:
	   (rN)       (REG ...)
	   (sp)	      (REG ...)
	   (fp)       (REG ...)
	   (pc)       (REG ...)  used for SYMBOL_REF and LABEL_REF, output
	   (disp(fp)) (MEM ...)       just before possible [rX:y]
	   (disp(sp)) (MEM ...)
	   (disp(sb)) (MEM ...)
	   */
      case REG:
	fprintf (file, "(%s)", reg_names[REGNO (base)]);
	break;
      case MEM:
	addr = XEXP(base,0);
	base = NULL;
	offset = NULL;
	while (addr != NULL)
	  {
	    if (GET_CODE (addr) == PLUS)
	      {
		if (GET_CODE (XEXP (addr, 0)) == PLUS)
		  {
		    tmp = XEXP (addr, 1);
		    addr = XEXP (addr, 0);
		  }
		else
		  {
		    tmp = XEXP (addr, 0);
		    addr = XEXP (addr, 1);
		  }
	      }
	    else
	      {
		tmp = addr;
		addr = NULL;
	      }
	    switch (GET_CODE (tmp))
	      {
	      case REG:
		base = tmp;
		break;
	      case CONST:
	      case CONST_INT:
	      case SYMBOL_REF:
	      case LABEL_REF:
		if (offset)
		  offset = gen_rtx (PLUS, SImode, tmp, offset);
		else
		  offset = tmp;
		break;
	      default:
		abort ();
	      }
	  }
	if (! offset)
	  offset = const0_rtx;
	fprintf (file, "(");
	output_addr_const (file, offset);
	if (base)
	  fprintf (file, "(%s)", reg_names[REGNO (base)]);
#ifdef BASE_REG_NEEDED
	else if (TARGET_SB)
	  fprintf (file, "(sb)");
	else
	  abort ();
#endif
	fprintf (file, ")");
	break;

      default:
	abort ();
      }
#ifdef PC_RELATIVE
  else				/* no base */
    if (GET_CODE (offset) == LABEL_REF || GET_CODE (offset) == SYMBOL_REF)
      fprintf (file, "(pc)");
#endif
#ifdef BASE_REG_NEEDED		/* this is defined if the assembler always
			   	   needs a base register */
    else if (TARGET_SB)
      fprintf (file, "(sb)");
    else
      abort ();
#endif
  /* now print index if we have one */
  if (indexexp)
    {
      if (GET_CODE (indexexp) == MULT)
	{
	  scale = INTVAL (XEXP (indexexp, 1)) >> 1;
	  indexexp = XEXP (indexexp, 0);
	}
      else
	scale = 0;
      if (GET_CODE (indexexp) != REG || REGNO (indexexp) >= 8)
	abort ();

#ifdef UTEK_ASM
      fprintf (file, "[%c`%s]",
	       scales[scale],
	       reg_names[REGNO (indexexp)]);
#else
      fprintf (file, "[%s:%c]",
	       reg_names[REGNO (indexexp)],
	       scales[scale]);
#endif
    }
}

/* National 32032 shifting is so bad that we can get
   better performance in many common cases by using other
   techniques.  */
char *
output_shift_insn (operands)
     rtx *operands;
{
  if (GET_CODE (operands[2]) == CONST_INT
      && INTVAL (operands[2]) > 0
      && INTVAL (operands[2]) <= 3)
    if (GET_CODE (operands[0]) == REG)
      {
	if (GET_CODE (operands[1]) == REG)
	  {
	    if (REGNO (operands[0]) == REGNO (operands[1]))
	      {
		if (operands[2] == const1_rtx)
		  return "addd %0,%0";
		else if (INTVAL (operands[2]) == 2)
		  return "addd %0,%0\n\taddd %0,%0";
	      }
	    if (operands[2] == const1_rtx)
	      return "movd %1,%0\n\taddd %0,%0";
	    
	    operands[1] = gen_indexed_expr (const0_rtx, operands[1], operands[2]);
	    return "addr %a1,%0";
	  }
	if (operands[2] == const1_rtx)
	  return "movd %1,%0\n\taddd %0,%0";
      }
    else if (GET_CODE (operands[1]) == REG)
      {
	operands[1] = gen_indexed_expr (const0_rtx, operands[1], operands[2]);
	return "addr %a1,%0";
      }
    else if (INTVAL (operands[2]) == 1
	     && GET_CODE (operands[1]) == MEM
	     && rtx_equal_p (operands [0], operands[1]))
      {
	rtx temp = XEXP (operands[1], 0);
	
	if (GET_CODE (temp) == REG
	    || (GET_CODE (temp) == PLUS
		&& GET_CODE (XEXP (temp, 0)) == REG
		&& GET_CODE (XEXP (temp, 1)) == CONST_INT))
	  return "addd %0,%0";
      }
    else return "ashd %2,%0";
  return "ashd %2,%0";
}