2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
* global.c (global_conflicts): Allow for a REG_UNUSED note
with a different mode to the REG set in the insn.
* gcc.c-torture/execute/20001203-2.c: New testcase.
From-SVN: r38046
modify sizes to be unsigned and use HOST_WIDE_INT.
* alias.c (reg_known_value_size): Now unsigned.
* c-typeck.c (build_unary_op, case ADDR_EXPR): Use byte_position.
(really_start_incremental_init): Use bitsize_zero_node.
(push_init_level, pop_init_level, output_init_element): Likewise.
Use bitsize_unit_node and bitsize_one_node.
(output_pending_init_elements, process_init_element): Likewise.
* combine.c (combine_max_regno, reg_sign_bit_copies): Now unsigned.
(make_extraction): Position and length HOST_WIDE_INT and unsigned
HOST_WIDE_INT, respectively.
(get_pos_from_mask): Passed in value is unsigned HOST_WIDE_INT.
(num_sign_bit_copies): Returns unsigned.
BITWIDTH now unsigned; rework arithmetic.
Remove recursive call from arg to MAX.
(combine_instructions, init_reg_last_arrays): NREGS now unsigned.
(setup_incoming_promotions, can_combine_p, try_combine, simplify_set):
REGNO now unsigned.
(set_nonzero_bit_and_sign_copies): NUM now unsigned.
(find_split_point, expand_compound_operation, make_extraction): LEN
now unsigned HOST_WIDE_INT, POS now HOST_WIDE_INT.
(make_field_assignment): Likewise.
(combine_simplify_rtx): Add cast.
(expand_compound_operation): MODEWIDTH now unsigned; rework arithmetic.
(force_to_mode): WIDTH now unsigned; add cast.
(if_then_else_cond): SIZE now unsigned.
(nonzero_bits): MODE_WIDTH, RESULT_WIDTH, and WIDTH now unsigned.
(extended_count): Now returns unsigned.
(simplify_shift_const): COUNT unsigned; arg is now INPUT_COUNT.
Add SIGNED_COUNT variable; MODE_WORDS and FIRST_COUNT now unsigned.
(simplify_comparison): MODE_WIDTH now unsigned.
(update_table_tick): REGNO and ENDREGNO now unsigned; new var R.
(mark_used_regs_combine): Likewise; rework arithmetic.
(record_value_for_reg): REGNO, ENDREGNO, and I now unsigned.
(record_dead_and_set_regs, reg_dead_at_p, distribute_notes): Likewise.
(record_promoted_value): REGNO now unsigned.
(get_last_value_validate): REGNO, ENDREGNO, and J now unsigned.
(get_last_value): REGNO now unsigned.
(use_crosses_set_p): REGNO and ENDREGNO now unsigned.
(reg_dead_regno, reg_dead_endregno): Now unsigned.
(remove_death): Arg REGNO now unsigned.
(move_deaths): REGNO, DEADREGNO, DEADEND, OUREND, and I now unsigned.
(reg_bitfield_target_p): REGNO, REGNO, ENDREGNO, and ENDTREGNO
now unsigned.
* convert.c (convert_to_integer): INPREC and OUTPREC now unsigned.
* cse.c (struct qty_table_elem): FIRST_REG and LAST_REG now unsigned.
(struct cse_reg_info): REGNO now unsigned.
(cached_regno): Now unsigned.
(REGNO_QTY_VALID_P): Add cast.
(make_new_qty, make_regs_eqv, delete_reg_eqiv): Regno args unsigned.
(remove_invalid_regs): Likewise.
(remove_invalid_subreg_refs): Likewise; arg WORD also unsigned
as are variables END and I.
(get_cse_reg_info, insert): Likewise.
(mention_regs, invalidate_for_call): REGNO, ENDREGNO, and I unsigned.
(canon_hash): Likewise.
(insert_regs, lookup_for_remove): REGNO now unsigned.
(invalidate): REGNO, ENDREGNO, TREGNO, and TENDREGNO now unsigned.
New variable RN.
* dbxout.c (dbxout_parms, dbxout_reg_parms): Don't check for REGNO < 0.
* dwarf2out.c (dwarf2ou_frame_debug_expr): Remove cast.
* emit-rtl.c (subreg_realpart_p): Add cast.
(operand_subword): Arg I is now unsigned as is var PARTWORDS.
(operand_subword_force): Arg I is now unsigned.
* except.c (eh_regs): Variable I is now unsigned.
* explow.c (hard_function_value): BYTES is unsigned HOST_WIDE_INT.
* expmed.c (store_fixed_bit_field): Position is HOST_WIDE_INT;
length is unsigned HOST_WIDE_INT; likewise for internal variables.
(store_split_bit_field, extract_fixed_bit_field): Likewise.
(extract_split_bit_field, store_bit_field, extract_bit_field):
Likewise.
* expr.c (store_constructor_fields, store_constructor, store_field):
Positions are HOST_WIDE_INT and lengths are unsigned HOST_WIDE_INT.
(expand_assignment, expand_expr, expand_expr_unaligned): Likewise.
(do_jump): Likewise.
(move_by_pieces, move_by_pieces_ninsns, clear_by_pieces):
MAX_SIZE is now unsigned.
(emit_group_load): BYTEPOS is HOST_WIDE_INT; BYTELEN is unsigned.
(emit_group_store): Likewise.
(emit_move_insn): I now unsigned.
(store_constructor): Use host_integerp, tree_low_cst, and
bitsize_unit_node.
(get_inner_reference): Return bitpos and bitsize as HOST_WIDE_INT.
Rework all calculations to use trees and new fields.
* expr.h (promoted_input_arg): Regno now unsigned.
(store_bit_field, extract_bit_field): Adjust types of pos and size.
(mark_seen_cases): Arg is HOST_WIDE_INT.
* flow.c (verify_wide_reg_1): REGNO now unsigned.
* fold-const.c (decode_field_reference): Size and pos HOST_WIDE_INT;
precisions and alignments are unsigned.
(optimize_bit_field_compare, fold_truthop): Likewise.
(int_const_binop): Adjust threshold for size_int_type_wide call.
(fold_convert): Likewise.
(size_int_type_wide): Make table larger and fix thinko that only
had half of table used.
(all_ones_mask_p, fold): Precisions are unsigned.
* function.c (put_reg_info_stack): REGNO is unsigned.
(instantiate_decl): Size is HOST_WIDE_INT.
(instantiate_virtual_regs): I is unsigned.
(assign_parms): REGNO, REGNOI, and REGNOR are unsigned.
(promoted_input_arg): REGNO is unsigned.
* function.h (struct function): x_max_parm_reg is now unsigned.
* gcse.c (max_gcse_regno): Now unsigned.
(struct null_pointer_info): min_reg and max_reg now unsigned.
(lookup_set, next_set): REGNO arg now unsigned.
(compute_hash_table): REGNO and I now unsigned.
(handle_avail_expr): regnum_for_replacing now unsigned.
(cprop_insn): REGNO now unsigned.
(delete_null_pointer_checks_1): BLOCK_REG now pointer to unsigned.
* ggc-common.c (ggc_mark_tree_children, case FIELD_DECL): New case.
* global.c (set_preference): SRC_REGNO, DEST_REGNO, and I now unsigned.
* hard-reg-set.h (reg_class_size): Now unsigned.
* integrate.c (mark_stores): LAST_REG and I now unsigned; new UREGNO.
* jump.c (mark_modified_reg): I now unsigned; add cast.
(rtx_equal_for_thread_p): Add cast.
* loop.c (max_reg_before_loop): Now unsigned.
(struct_movable): REGNO now unsigned.
(try_copy_prop): REGNO arg unsigned.
(regs_match_p): XN and YN now unsigned.
(consec_sets_invariant_p, maybe_eliminate_biv): REGNO now unsigned.
(strength_reduce): Likewise; NREGS also unsigned.
(first_increment_giv, last_increment_giv unsigned): Now unsigned.
* loop.h (struct iv_class): REGNO now unsigned.
(max_reg_before_loop, first_increment_giv, last_increment_giv):
Now unsigned.
* machmode.h (mode_size, mode_unit_size): Now unsigned.
(mode_for_size, smallest_mode_for_size): Pass size as unsigned.
* optabs.c (expand_binop): I and NWORDS now unsigned.
(expand_unop): I now unsigned.
* print-tree.c (print_node): Don't print DECL_FIELD_BITPOS, but do
print DECL_FIELD_OFFSET and DECL_FIELD_BIT_OFFSET.
* real.c (significand_size): Now returns unsigned.
* real.h (significand_size): Likewise.
* regclass.c (reg_class_size): Now unsigned.
(choose_hard_reg_mode): Both operands now unsigned.
(record_reg_classes): REGNO and NR now unsigned.
(reg_scan): NREGS now unsigned.
(reg_scan_update): old_max_regno now unsigned.
(reg_scan_mark_refs): Arg MIN_REGNO and var REGNO now unsigned.
* reload.c (find_valid_class): BEST_SIZE now unsigned.
(find_dummy_reload): REGNO, NWORDS, and I now unsigned.
(hard_reg_set_here_p): Args BEG_REGNO and END_REGNO now unsigned.
Likewise for variable R.
(refers_to_regno_for_reload_p): Args REGNO and END_REGNO now unsigned,
as are variables INNER_REGNO and INNER_ENDREGNO; add new variable R.
(find_equiv_reg): Add casts.
(regno_clobbered_p): Arg REGNO now unsigned.
* reload.h (struct reload): NREGS now unsigned.
(refers_to_regno_for_reload_p): Regno args are unsigned.
(regno_clobbered_p): Likewise.
* reload1.c (reg_max_ref_width, spill_stack_slot_width): Now unsigned.
(compute_use_by_pseudos): REGNO now unsigned.
(find_reg): I and J now unsigned, new variable K, and change loop
variables accordingly; THIS_NREGS now unsigned.
(alter_reg): INHERENT_SIZE and TOTAL_SIZE now unsigned.
(spill_hard_reg): REGNO arg now unsigned; add casts.
(forget_old_reloads_1): REGNO, NR, and I now unsigned.
(mark_reload_reg_in_use): Arg REGNO and vars NREGS and I now unsigned.
(clear_reload_reg_in_use): Arg REGNO and vars NREGS, START_REGNO,
END_REGNO, CONFLICT_START, and CONFLICT_END now unsigned.
(reload_reg_free_p, reload_reg_reaches_end_p): Arg REGNO now unsigned.
(choose_reload_regs): MAX_GROUP_SIZE now unsigned.
(emit_reload_insns): REGNO now unsigned.
(reload_cse_move2add): Add cast.
(move2add_note_store): REGNO and I now unsigned; new variable ENDREGNO
and rework loop.
* resource.c (mark_referenced_resources, mark_set_resources): New
variable R; REGNO and LAST_REGNO now unsigned.
(mark_target_live_regs): J and REGNO now unsigned.
* rtl.c (mode_size, mode_unit_size): Now unsigned.
* rtl.h (union rtunion_def): New field rtuint.
(XCUINT): New macro.
(ADDRESSOF_REGNO, REGNO, SUBREG_WORD): New XCUINT.
(operand_subword, operand_subword_force): Word number is unsigned.
(choose_hard_reg_mode): Operands are unsigned.
(refers_to-regno_p, dead_or_set_regno_p): Regno arg is unsigned.
(find_regno_note, find_regno_fusage, replace_regs): Likewise.
(regno_use_in, combine_instructions, remove_death): Likewise.
(reg_scan, reg_scan_update): Likewise.
(extended_count): Return is unsigned.
* rtlanal.c (refers_to_regno_p): Args REGNO and ENDREGNO and vars I,
INNER_REGNO, and INNER_ENDREGNO now unsigned; new variable X_REGNO.
(reg_overlap_mentioned_p): REGNO and ENDREGNO now unsigned.
(reg_set_last_first_regno, reg_set_last_last_regno): Now unsigned.
(reg_reg_last_1): FIRS and LAST now unsigned.
(dead_or_set_p): REGNO, LAST_REGNO, and I now unsigned.
(dead_or_set_regno_p): Arg TEST_REGNO and vars REGNO and ENDREGNO
now unsigned.
(find_regno_note, regno_use_in): Arg REGNO now unsigned.
(find_regno_fusage): Likewise; also var REGNOTE now unsigned.
(find_reg_fusage): Variables REGNO, END_REGNO, and I now unsigned.
(replace_regs): Arg NREGS now unsigned.
* sdbout.c (sdbout_parms, sdbout_reg_parms): Don't check REGNO < 0.
* simplify-rtx.c (simplify_unary_operation): WIDTH now unsigned.
(simplify_binary_operation): Likewise.
(cselib_invalidate_regno): Arg REGNO and variables ENDREGNO, I, and
THIS_LAST now unsigned.
(cselib_record_set): Add cast.
* ssa.c (ssa_max_reg_num): Now unsigned.
(rename_block): REGNO now unsigned.
* stmt.c (expand_return): Bit positions unsigned HOST_WIDE_INT;
sizes now unsigned.
(all_cases_count): Just return -1 not -2.
COUNT, MINVAL, and LASTVAL now HOST_WIDE_INT.
Rework tests to use trees whenever possible.
Use host_integerp and tree_low_cst.
(mark_seen_cases): COUNT arg now HOST_WIDE_INT;
Likewise variable NEXT_NODE_OFFSET; XLO now unsigned.
(check_for_full_enumeration_handing): BYTES_NEEDED, I to HOST_WIDE_INT.
* stor-layout.c (mode_for_size): SIZE arg now unsigned.
(smallest_mode_for_size): Likewise.
(layout_decl): Simplify handing of a specified DECL_SIZE_UNIT.
KNOWN_ALIGN is now an alignment, so simplify code.
Don't turn off DECL_BIT_FIELD if field is BLKmode, but not type.
(start_record_layout): Renamed from new_record_layout_info.
Update to new fields.
(debug_rli, normalize_rli, rli_size_unit_so_far, rli_size_so_far):
New functions.
(place_union_field): Renamed from layout_union_field.
Update to use new fields in rli.
(place_field): Renamed from layout_field.
Major rewrite to use new fields in rli; pass alignment to layout_decl.
(finalize_record_size): Rework to use new fields in rli and handle
union.
(compute_record_mode): Rework to simplify and to use new DECL fields.
(finalize_type_size): Make rounding more consistent.
(finish_union_layout): Deleted.
(layout_type, case VOID_TYPE): Don't set TYPE_SIZE_UNIT either.
(layout_type, case RECORD_TYPE): Call new function names.
(initialize_sizetypes): Set TYPE_IS_SIZETYPE.
(set_sizetype): Set TYPE_IS_SIZETYPE earlier.
(get_best_mode): UNIT is now unsigned; remove casts.
* tree.c (bit_position): Compute from new fields.
(byte_position, int_byte_position): New functions.
(print_type_hash_statistics): Cast to remove warning.
(build_range_type): Use host_integerp and tree_low_cst to try to hash.
(build_index_type): Likewise; make subtype of sizetype.
(build_index_2_type): Pass sizetype to build_range_type.
(build_common_tree_nodes): Use size_int and bitsize_int to
initialize nodes; add bitsize_{zero,one,unit}_node.
* tree.h (DECL_FIELD_CONTEXT): Use FIELD_DECL_CHECK.
(DECL_BIT_FIELD_TYPE, DECL_QUALIFIER, DECL_FCONTEXT): Likewise.
(DECL_PACKED, DECL_BIT_FIELD): Likewise.
(DECL_FIELD_BITPOS): Deleted.
(DECL_FIELD_OFFSET, DECL_FIELD_BIT_OFFSET): New fields.
(DECL_RESULT, DECL_SAVED_INSNS): Use FUNCTION_DECL_CHECK.
(DECL_FRAME_SIZE, DECL_FUNCTION_CODE, DECL_NO_STATIC_CHAIN): Likewise.
(DECL_INLINE, DECL_BUILT_IN_NONANSI, DECL_IS_MALLOC): Likewise.
(DECL_BUILT_IN_CLASS, DECL_STATIC_CONSTRUCTOR): Likewise.
(DECL_STATIC_DESTRUCTOR, DECL_NO_CHECK_MEMORY_USAGE): Likewise.
(DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT, DECL_NO_LIMIT_STACK) Likewise.
(DECL_ORIGINAL_TYPE, TYPE_DECL_SUPPRESS_DEBUG): Use TYPE_DECL_CHECK.
(DECL_ARG_TYPE_AS_WRITEN, DECL_ARG_TYPE): Use PARM_DECL_CHECK.
(DECL_INCOMING_RTL, DECL_TRANSPARENT_UNION): Likewise.
(DECL_ALIGN): Adjust to new field in union.
(DECL_OFFSET_ALIGN): New field.
(DECL_ERROR_ISSUED, DECL_TOO_LATE): Use LABEL_DECL_CHECK.
(DECL_IN_TEXT_SECTION): Use VAR_DECL_CHECK.
(union tree_decl): Add struct for both aligns.
(enum tree_index): Add TI_BITSIZE_{ZERO,ONE,UNIT}.
(bitsize_zero_node, bitsize_one_node, bitsize_unit_node): Added.
(struct record_layout_info): Rework fields to have offset
alignment and byte and bit position.
(start_record_layout, place_field): Renamed from old names.
(rli_size_so_far, rli_size_unit_so_far, normalize_rli): New decls.
(byte_position, int_byte_position): Likewise.
(get_inner_reference): Change types of position and length.
* unroll.c (unroll_loop): New variable R; use for some loops.
MAX_LOCAL_REGNUM and MAXREGNUM now unsigned.
(calculate_giv_inc): Arg REGNO now unsigned.
(copy_loop_body): REGNO and SRC_REGNO now unsigned.
* varasm.c (assemble_variable): Clean up handling of size using
host_integerp and tree_low_cst.
(decode_addr_const): Use byte, not bit, position.
(output_constructor): bitpos and offsets are HOST_WIDE_INT;
use tree_low_cst and int_bit_position.
* objc/objc-act.c (build_ivar_list_initializer): Use byte_position.
* ch/actions.c (check_missing_cases): BYTES_NEEDED is HOST_WIDE_INT.
* ch/typeck.c (expand_constant_to_buffer): Use int_byte_position.
(extract_constant_from_buffer): Likewise.
* cp/class.c (build_vbase_pointer_fields): layout_field now
place_field.
(get_vfield_offset): Use byte_position.
(set_rtti_entry): Set OFFSET to ssizetype zero.
(get_binfo_offset_as_int): Deleted.
(dfs_record_base_offsets): Use tree_low_cst.
(dfs_search_base_offsets): Likewise.
(layout_nonempty_base_or_field): Reflect changes in RLI format
and call byte_position.
(layout_empty_base): Convert offset to ssizetype.
(build_base_field): use rli_size_unit_so_far.
(dfs_propagate_binfo_offsets): Do computation in proper type.
(layout_virtual_bases): Pass ssizetype to propagate_binfo_offsets.
(layout_class_type): Reflect changes in RLI names and fields.
(finish_struct_1): Set DECL_FIELD_OFFSET.
* cp/dump.c (dequeue_and_dump): Call bit_position.
* cp/expr.c (cplus_expand_constant): Use byte_position.
* cp/rtti.c (expand_class_desc): Use bitsize_one_node.
* cp/typeck.c (build_component_addr): Use byte_position and don't
special case for zero offset.
* f/com.c (ffecom_tree_canonize_ptr_): Use bitsize_zero_node.
(ffecom_tree_canonize_ref_): Likewise.
* java/class.c (make_field_value): Use byte_position.
* java/expr.c (JAVA_ARRAY_LENGTH_OFFSET): Use byte_position.
(java_array_data_offset): Likewise.
* java/java-tree.h (MAYBE_CREATE_TYPE_TYPE_LANG_SPECIFIC): Add case to
bzero call.
From-SVN: r32742
* sibcall.c (skip_copy_to_return_value): Use OUTGOING_REGNO for
comparison if regno's are equal.
* calls.c (initialize_argument_informat): Add ecf_flags argument.
Use FUNCTION_INCOMING_ARG if available and ECF_SIBCALL.
(expand_call): Update caller.
Avoid making a sibling call if argument size of the callee is larger
than argument size of the caller.
Call hard_function_value with outgoing set if in sibcall pass.
Use FUNCTION_INCOMING_ARG if available and ECF_SIBCALL.
* final.c (permitted_reg_in_leaf_functions, only_leaf_regs_used):
Change LEAF_REGISTERS from an array initializer to actual array
identifier. Move static global variable into the function.
(leaf_function_p): Allow SIBLING_CALL_P calls even outside of
sequences for leaf functions.
* global.c (global_alloc): Likewise.
* tm.texi (LEAF_REGISTERS): Update documentation.
* config/sparc/sparc.h (CONDITIONAL_REGISTER_USAGE): Remove the ugly
TARGET_FLAT leaf disabling hack.
(LEAF_REGISTERS): Changed from an array initializer to actual array
identifier to avoid duplication and remove the above hack.
(FUNCTION_OK_FOR_SIBCALL): Define.
* config/sparc/sparc.md (sibcall): New attr type. Use it almost
always like call attribute.
(eligible_for_sibcall_delay): New attribute.
(sibcall): New delay type.
(sibcall, sibcall_value, sibcall_epilogue): New expands.
(sibcall_symbolic_sp32, sibcall_symbolic_sp64,
sibcall_value_symbolic_sp32, sibcall_value_symbolic_sp64): New insns.
* config/sparc/sparc.c (sparc_leaf_regs): New array.
(eligible_for_sibcall_delay, output_restore_regs, output_sibcall):
New functions.
(output_function_epilogue): Move part of the code into
output_restore_regs.
(ultra_code_from_mask, ultrasparc_sched_reorder): Handle
TYPE_SIBCALL.
* sparc-protos.h (output_sibcall, eligible_for_sibcall_delay): New
prototypes.
From-SVN: r32730
Fri Nov 5 01:24:37 1999 J"orn Rennecke <amylaar@cygnus.co.uk>
* global.c (CONFLICTP, SET_CONFLICT): Avoid signed division.
(mirror_conflicts): New function.
(global_alloc): Call it.
(expand_preferences): Remove redundant CONFLICTP test.
(find_reg, dump_conflicts): Likewise.
(prune_preferences): Process conflicts one word at a time.
Fri Nov 5 01:05:21 1999 Richard Henderson <rth@cygnus.com>
* global.c (build_insn_chain): Use EXECUTE_IF_SET_IN_BITMAP
instead of an explicit loop.
From-SVN: r30407
Include function.h in most files. Remove most of the global variables
duplicated in function.h. Add accessor macros for them which access
current_function. Delete INLINE_HEADER rtx and related code, replace
with code using struct function to store inlining related data.
From-SVN: r28626
