2001-04-03 Jakub Jelinek <jakub@redhat.com>
David S. Miller <davem@pierdol.cobaltmicro.com>
Andrew MacLeod <amacleod@redhat.com>
Use byte offsets in SUBREGs instead of words.
* alias.c (nonlocal_mentioned_p): Use subreg_regno function.
* caller-save.c (mark_set_regs): Change callers of subreg_hard_regno
to pass new argument.
(add_stored_regs): Use subreg_regno_offset function.
* calls.c (expand_call): For non-paradoxical SUBREG take endianess
into account.
(precompute_arguments): Use gen_lowpart_SUBREG.
* combine.c (try_combine): Replace explicit XEXP with SUBREG_REG.
(combine_simplify_rtx): Rework to use SUBREG_BYTE.
(simplify_set): Rework to use SUBREG_BYTE.
(expand_field_assignment): Use SUBREG_BYTE.
(make_extraction): Use SUBREG_BYTE.
(if_then_else_cond): Use SUBREG_BYTE.
(apply_distributive_law): Use SUBREG_BYTE and fixup subreg comments.
(gen_lowpart_for_combine): Compute full byte offset.
* cse.c (mention_regs): Use SUBREG_BYTE.
(remove_invalid_subreg_refs): Rework to use SUBREG_BYTE.
(canon_hash): Use SUBREG_BYTE.
(fold_rtx): Pass SUBREG_BYTE div UNITS_PER_WORD to operand_subword.
(gen_lowpart_if_possible): Formatting.
* dbxout.c (dbxout_symbol_location): Compute SUBREG hard regnos
correctly.
* dwarf2out.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* dwarfout.c (is_pseudo_reg): Fixup explicit XEXP into SUBREG_REG
(output_mem_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
(output_loc_descriptor): Fixup explicit XEXP into SUBREG_REG
* emit-rtl.c (gen_rtx_SUBREG): New function, used to verify
certain invariants about SUBREGs the compiler creates.
(gen_lowpart_SUBREG): New function.
(subreg_hard_regno): New function to get the final register number.
(gen_lowpart_common): Use SUBREG_BYTE.
(gen_imagpart): Spacing nits.
(subreg_realpart_p): Use SUBREG_BYTE.
(gen_highpart): Use SUBREG_BYTE.
(subreg_lowpart_p): Always compute endian corrected goal offset,
even at the byte level, then compare against that.
(constant_subword): New function, pulled out all constant cases
from operand_subword and changed second argument name to offset.
(operand_subword): Detect non REG/SUBREG/CONCAT/MEM cases early
and call constant_subword to do the work. Return const0_rtx if
looking for a word outside of OP.
(operand_subword_force): Change second arg name to offset.
* expmed.c (store_bit_field): Use SUBREG_BYTE.
(store_split_bit_field): Use SUBREG_BYTE.
(extract_bit_field): Use SUBREG_BYTE.
(extract_split_bit_field): Use SUBREG_BYTE.
(expand_shift): Use SUBREG_BYTE.
* expr.c (store_expr, expand_expr): Use gen_lowpart_SUBREG.
* final.c (alter_subreg) Use subreg_hard_regno and SUBREG_BYTE.
* flow.c (set_noop_p): Use SUBREG_BYTE.
(mark_set_1): Remove ALTER_HARD_SUBREG. Use subreg_regno_offset instead.
* function.c (fixup_var_refs_1): Fixup explicit XEXP into a SUBREG_REG.
(fixup_memory_subreg): Use SUBREG_BYTE and remove byte endian
correction code.
(optimize_bit_field): Use SUBREG_BYTE.
(purge_addressof_1): Use SUBREG_BYTE.
(purge_single_hard_subreg_set): Use subreg_regno_offset function.
(assign_params): Mark arguments SUBREG_PROMOTED_VAR_P if they are
actually promoted by the caller and PROMOTE_FOR_CALLS_ONLY is true.
* gengenrtl.c (special_rtx): Add SUBREG.
* global.c (mark_reg_store): Use SUBREG_BYTE.
(set_preference): Rework to use subreg_regno_offset and SUBREG_BYTE.
* ifcvt (noce_emit_move_insn): Use SUBREG_BYTE.
* integrate.c (copy_rtx_and_substitute): Use SUBREG_BYTE and make sure
final byte offset is congruent to subreg's mode size.
(subst_constants): Use SUBREG_BYTE.
(mark_stores): Use subreg_regno_offset function.
* jump.c (rtx_renumbered_equal_p, true_regnum): Use subreg_regno_offset
function and SUBREG_BYTE.
* local-alloc.c (combine_regs): Use subreg_regno_offset function.
(reg_is_born): Use subreg_hard_regno.
* recog.c (valid_replace_rtx_1): Use SUBREG_BYTE and remove byte
endian correction code. Don't combine subregs unless resulting
offset aligns with type. Fix subreg constant extraction for DImode.
Simplify SUBREG of VOIDmode CONST_DOUBLE.
(general_operand): Remove dead mode_altering_drug code.
(indirect_operand): Use SUBREG_BYTE.
(constrain_operands): Use subreg_regno_offset function.
* reg-stack.c (get_true_reg): Use subreg_regno_offset function.
* regmove.c (regmove_optimize): Use SUBREG_BYTE.
(optimize_reg_copy_3): Use gen_lowpart_SUBREG.
* regs.h (REG_SIZE): Allow target to override.
(REGMODE_NATURAL_SIZE): New macro which target can override.
* reload.c (reload_inner_reg_of_subreg): subreg_regno should be used
on the entire subreg rtx.
(push_reload): Use SUBREG_BYTE in comments and code.
(find_dummy_reload): Use subreg_regno_offset. Only adjust offsets
for hard registers inside subregs.
(operands_match_p): Use subreg_regno_offset.
(find_reloads): Use SUBREG_BYTE and only advance offset for subregs
containing hard regs.
(find_reload_toplev): Use SUBREG_BYTE. Remove byte endian
corrections when fixing up MEM subregs.
(find_reloads_address_1): Use SUBREG_BYTE, subreg_regno, and
subreg_regno_offset where appropriate.
(find_reloads_subreg_address): Use SUBREG_BYTE. Remove
byte endian corrections when fixing up MEM subregs.
(subst_reloads): When combining two subregs, make sure final
offset is congruent to subreg's mode size.
(find_replacement): Use SUBREG_BYTE and subreg_regno_offset.
(refers_to_regno_for_reload_p): Use subreg_regno.
(reg_overlap_mentioned_for_reload_p): Use subreg_regno_offset.
* reload1.c (eliminate_regs) Use SUBREG_BYTE. Remove byte endian
correction code for memory subreg fixups.
(forget_old_reload_1): Use subreg_regno_offset.
(choose_reload_regs): Use subreg_regno.
(emit_input_reload_insns): Use SUBREG_BYTE.
(reload_combine_note_store): Use subreg_regno_offset.
(move2add_note_store): Use subreg_regno_offset.
* resource.c (update_live_status, mark_referenced_resources): Use
subreg_regno function.
(mark_set_resources): Use subreg_regno function.
* rtl.h (SUBREG_WORD): Rename to SUBREG_BYTE.
(subreg_regno_offset, subreg_regno): Define prototypes.
(subreg_hard_regno, constant_subword, gen_rtx_SUBREG): Newi functions.
(gen_lowpart_SUBREG): Add prototype.
* rtl.texi (subreg): Update to reflect new byte offset representation.
Add mentioning of the effect that BYTES_BIG_ENDIAN has on subregs now.
* rtlanal.c (refers_to_regno_p): Use subreg_regno.
(reg_overlap_mentioned_p): Use subreg_regno.
(replace_regs); Make sure final offset of combined subreg is
congruent to size of subreg's mode.
(subreg_regno_offset): New function.
(subreg_regno): New function.
* sched-vis.c (print_value): Change SUBREG_WORD to SUBREG_BYTE.
* sdbout.c (sdbout_symbol): Compute offset using alter_subreg.
* stmt.c (expand_anon_union_decl): Use gen_lowpart_SUBREG.
* tm.texi (ALTER_HARD_SUBREG): Remove, it is now dead.
(SUBREG_REGNO_OFFSET): Describe SUBREG_REGNO_OFFSET overrides.
* config/a29k/a29k.c (gpc_reg_operand): Use subreg_regno.
(a29k_get_reloaded_address): Use SUBREG_BYTE.
(print_operand): Use SUBREG_BYTE.
* config/alpha/alpha.c (print_operand_address): Use SUBREG_BYTE.
* config/arm/arm.c (arm_reload_in_hi): Use SUBREG_BYTE.
(arm_reload_out_hi): Use SUBREG_BYTE.
* config/d30v/d30v.c (d30v_split_double): Use subreg_regno_offset
instead of SUBREG_WORD.
(d30v_print_operand_memory_reference): Use subreg_regno_offset.
* config/dsp16xx/dsp16xx.md (extendqihi2, zero_extendqihi2): Fix
SUBREG creation to use byte offset.
* config/h8300/h8300.md (Unnamed HImode zero extraction and 16bit
inverted load insns): Fix explicit rtl subregs to use byte
offsets.
* config/i370/i370.md (cmpstrsi, movstrsi, mulsi3, divsi3,
udivsi3, umodsi3): Generate SUBREGs with byte offsets.
* config/i860/i860.c (single_insn_src_p): Use SUBREG_BYTE.
* config/i860/i860.md (mulsi3_big): Fixup explicit SUBREGs in rtl
to use byte offsets.
(unnamed fmlow.dd insn): Fixup SUBREGS to use byte offsets.
* config/i960/i960.md (extendhisi2): Generate SUBREGs with byte
offsets, also make sure it is congruent to SUBREG's mode size.
(extendqisi2, extendqihi2, zero_extendhisi2, zero_extendqisi2,
unnamed ldob insn): Generate SUBREGs with byte offset.
(zero_extendqihi2): SUBREG's are byte offsets.
* config/m68hc11/m68hc11.c (m68hc11_gen_lowpart): Use SUBREG_BYTE.
(m68hc11_gen_highpart): Use SUBREG_BYTE.
* config/m68k/m68k.md (zero_extendhisi2, zero_extendqihi2,
zero-extendqisi2): Generate SUBREGs with byte offset.
(umulsidi3, mulsidi3, subreghi1ashrdi_const32,
subregsi1ashrdi_const32, subreg1lshrdi_const32): Fixup explicit
subregs in rtl to use byte offsets.
* config/m88k/m88k.md (extendsidi2): fixup subregs to use byte offset.
* config/mips/mips.c (mips_move_1word): Use subreg_regno_offset.
(mips_move_2words): Use subreg_regno_offset.
(mips_secondary_reload_class): Use subreg_regno_offset.
* config/mips/mips.md (DImode plus, minus, move, and logical op
splits): Fixup explicit subregs in rtl to use byte offsets.
* config/mn10200/mn10200.c (print_operand): Use subreg_regno function.
* config/mn10300/mn10300.c (print_operand): Use subreg_regno function.
* config/ns32k/ns32k.md (udivmoddisi4): Fix explicit subregs in
rtl to use byte offsets.
* config/pa/pa.c (emit_move_sequence): Use SUBREG_BYTE.
* config/pa/pa.md (floatunssisf2, floatunssidf2, mulsi3): fix explicit
subregs to use byte offsets.
* config/pdp11/pdp11.md (zero_extendhisi2, modhi3, modhi3+1):
Fixup explicit subregs in rtl to use byte offsets.
* config/romp/romp.c (memory_offset_in_range_p): Use SUBREG_BYTE
and remove byte endian correction code.
* config/sh/sh.c (output_movedouble): Use subreg_regno.
(gen_ashift_hi): Use SUBREG_BYTE.
(regs_used): Use subreg_regno_offset.
(machine_dependent_reorg): Use subreg_regno_offset.
* config/sh/sh.h (INDEX_REGISTER_RTX_P): Use SUBREG_BYTE.
* config/sh/sh.md (DImode and DFmode move splits): Use subreg_regno.
(movdf_i4): Subregs are byte offsets now.
* config/sparc/sparc.c (ultra_find_type): Use SUBREG_BYTE.
* config/sparc/sparc.h (ALTER_HARD_SUBREG): Removed.
(REGMODE_NATURAL_SIZE): Override.
(REG_SIZE): For SUBREG check float mode on SUBREG_REG's mode.
* config/sparc/sparc.md (TFmode move splits): Generate SUBREGs
with byte offsets.
(zero_extendhisi2, zero_extendqidi2_insn, extendhisi2,
extendqihi2, sign_extendqihi2_insn, sign_extendqisi2_insn,
extendqidi2): Generate SUBREGs with byte offsets, also make sure
it is congruent to SUBREG's mode size.
(smulsi3_highpart_v8plus): Fix explicit subregs in rtl to use byte
offsets.
(cmp_siqi_trunc, cmp_siqi_trunc_set, cmp_diqi_trunc,
cmp_diqi_trunc_set, lshrdi3_v8plus+1, lshrdi3_v8plus+2,
lshrdi3_v8plus+3, lshrdi3_v8plus+4): Use proper
SUBREG_BYTE offset for non-paradoxical subregs in patterns.
* config/v850/v850.c (print_operand, output_move_double): Use
subreg_regno function.
Co-Authored-By: Andrew MacLeod <amacleod@redhat.com>
Co-Authored-By: David S. Miller <davem@pierdol.cobaltmicro.com>
From-SVN: r41058
toplevel:
* ggc-none.c, ggc-simple.c, ggc-page.c (ggc_alloc_obj): Rename
it ggc_alloc, drop second argument, never clear returned memory.
* ggc-common.c (ggc_alloc_string): Use ggc_alloc.
(ggc_alloc_cleared): New.
* ggc.h: Prototype ggc_alloc and ggc_alloc_cleared, not
ggc_alloc_obj. Remove ggc_alloc macro.
(ggc_alloc_rtx, ggc_alloc_rtvec, ggc_alloc_tree): Use ggc_alloc.
* rtl.c (rtvec_alloc): Clear the vector always.
(rtx_alloc): Clear the first word always. Remove dirty
obstack tricks (this routine is no longer a bottleneck).
* tree.c (make_node): Clear the new node always.
(make_tree_vec): Likewise.
(tree_cons): Clear the common structure always.
(build1): Likewise; also, clear TREE_COMPLEXITY.
* gengenrtl.c: Use puts wherever possible. Remove extra
newlines.
(gendef): Clear the first word of an RTX in the generator
function, irrespective of ggc_p. Initialize '0' slots to
NULL.
(genlegend): Don't generate obstack_alloc_rtx routine, just a
thin wrapper macro around obstack_alloc.
* stmt.c (expand_fixup): Use ggc_alloc.
* c-typeck.c (add_pending_init): Use ggc_alloc.
* emit-rtl.c (init_emit_once): Clear CONST_DOUBLE_CHAIN(tem).
* varasm.c (immed_double_const): Set CONST_DOUBLE_MEM(r) to
const0_rtx when it is created.
(immed_real_const_1): Set CONST_DOUBLE_CHAIN(r) to NULL_RTX if
we are not in a function.
* tree.c (tree_class_check_failed): Make second arg an int.
* tree.h: Update prototype.
cp:
* call.c (add_candidate): Use ggc_alloc_cleared.
* decl.c (lookup_label): Likewise.
* lex.c (retrofit_lang_decl): Likewise.
From-SVN: r34478
* gengenrtl.c (CONST_DOUBLE_FORMAT): Take the size REAL_ARITHMETIC
will use into account. Expand the max width to 5.
* rtl.c: Likewise.
From-SVN: r29216
* Makefile.in (ggc-simple.o): Depend on varray.h.
(rtl.o): Depend on ggc.h.
(genattrtab.o): Depend on ggc.h.
(print-tree.o): Likewise.
(fold-const.o): Likewise.
* emit-rtl.c (sequence_element_free_list): Remove, and all references.
(make_insn_raw): Don't cache insns when GC'ing.
(emit_insn_before): Likewise.
(emit_insn_after): Likewise.
(emit_insn): Likewise.
(start_sequence): Use xmalloc to allocate the sequence_stack.
(end_sequence): Add free to free it.
(gen_sequence): Don't cache insns when GC'ing.
(clear_emit_caches): Don't use sequence_element_free_list.
(init_emit): Use xcalloc, not xmalloc+bzero.
* fold-const.c (size_int_wide): Kill the cache, when GC'ing.
* function.c (pop_function_context_from): Use free to free the
fixup_var_refs_queue.
(put_reg_into_stack): Allocate it with xmalloc.
* genattrtab.c: Include ggc.h.
(operate_exp): Don't use obstack_free when GC'ing.
(simplify_cond): Likewise.
(simplify_text_exp): Likewise.
(optimize_attrs): Likewise.
* gengenrtl.c (gendef): Use ggc_alloc_rtx to allocate RTL, when
GC'ing.
(gencode): Generate a #include for ggc.h.
* ggc-callbacks.c (ggc_p): Define it to zero.
* ggc-none.c (ggc_p): Likewise.
* ggc-simple.c: Include varray.h.
(ggc_mark_tree_varray): New function.
(ggc_add_tree_varray_root): Likewise.
(ggc_mark_tree_varray_ptr): Likewise.
* ggc.h (ggc_p): Declare.
(varray_head_tag): Likewise.
(ggc_add_tree_varray_root): Declare.
* print-tree.c (print_node): Don't check for TREE_PERMANENT
inconsistencies when GC'ing.
* rtl.c: Include ggc.h.
(rtvec_alloc): Use ggc_alloc_rtvec when GC'ing.
(rtx_alloc): Use ggc_alloc_rtx when GC'ing.
(rtx_free): Don't call obstack_free when GC'ing.
* toplev.c (rest_of_compilation): Call ggc_collect after every
pass, if GC'ing.
* tree.c (push_obstacks): Do nothing, if GC'ing.
(pop_obstacks_nochange): Likewise.
(pop_obstacks): Likewise.
(make_node): Use ggc_alloc_tree when GC'ing.
(copy_node): Likewise.
(get_identifier): Use ggc_alloc_string when GC'ing.
(build_string): Likewise.
(make_tree_vec): Use ggc_alloc_tree when GC'ing.
(tree_cons): Likewise.
(build1): Likewise.
(type_hash_canon): Don't call obstack_free when GC'ing.
From-SVN: r29131
1999-08-27 13:27 -0700 Zack Weinberg <zack@bitmover.com>
* rtl.c: Define CONST_DOUBLE_FORMAT to the appropriate format
for a CONST_DOUBLE, at compile time. Initialize rtx_length
and class_narrowest_mode at compile time. Kill init_rtl.
Mark rtx_length, mode_class, mode_size, mode_unit_size,
mode_wider_mode, mode_mask_array, class_narrowest_mode, and
rtx_format as const. Kill all references to EXTRA_CC_MODES or
EXTRA_CC_NAMES.
* rtl.def (CONST_DOUBLE): Use CONST_DOUBLE_FORMAT macro for
format.
* rtl.h: Declare rtx_length and rtx_format as const.
* machmode.def: Define CC(). Use CC() to define CCmode. If
EXTRA_CC_MODES is defined, expand it here.
* machmode.h: Declare mode_class, mode_size, mode_unit_size,
mode_wider_mode, mode_mask_array, and class_narrowest_mode as
const. Kill all references to EXTRA_CC_MODES.
* toplev.c: Don't prototype or call init_rtl.
* optabs.c: Don't call init_mov_optab.
* genemit.c: Don't generate init_mov_optab. Don't call
init_rtl.
* gengenrtl.c: Duplicate calculation of CONST_DOUBLE_FORMAT
here.
* genattr.c, genattrtab.c, gencodes.c, genconfig.c,
genextract.c, genflags.c, genopinit.c, genoutput.c, genpeep.c,
genrecog.c: Don't call init_rtl.
* arc.h, arm.h, c4x.h, i386.h, i960.h, m88k.h, pa.h, pdp11.h,
rs6000.h, sparc.h: Don't define EXTRA_CC_NAMES. Use CC() in
definition of EXTRA_CC_MODES.
* md.texi: Kill ref to EXTRA_CC_NAMES.
* tm.texi: Document new way to define EXTRA_CC_MODES.
* genrecog.c: Do not look up the name of a define_split.
(Unrelated bugfix.)
From-SVN: r28937
1999-08-25 22:10 -0700 Zack Weinberg <zack@bitmover.com>
* system.h: Don't redefine abort or trim_filename.
* rtl.h: Define abort to fancy_abort (__FILE__, __LINE__, 0)
or fancy_abort (__FILE__, __LINE__, __FUNCTION__) depending on
whether or not __FUNCTION__ is available.
* tree.h: Duplicate rtl.h's definition of abort, for files
that don't include rtl.h. Delete all code to perform type
checking with a compiler other than GCC.
* varray.h: Delete all code to perform type checking with a
compiler other than GCC. Make VARRAY_CHECK() always evaluate
its arguments exactly once, using a statement expression.
Adjust the VARRAY_<type> accessor macros to match.
* toplev.h (fatal_insn, fatal_insn_not_found): Kill.
(_fatal_insn, _fatal_insn_not_found): New fns, take info on
caller's location. Define fatal_insn and fatal_insn_not_found
as macros that use _fatal_insn and _fatal_insn_not_found.
(fancy_abort, trim_filename): Kill prototypes.
* rtl.c (trim_filename): Move here from toplev.c.
(fancy_abort): New function.
(DIR_SEPARATOR): Provide default definition.
* tree.c (tree_check_failed, tree_class_check_failed): Go
through fancy_abort.
(tree_check, tree_class_check, cst_or_constructor_check,
expr_check): Delete.
* varray.c (varray_check_failed): New function.
* toplev.c (fatal_insn, fatal_insn_not_found): Replace with
_fatal_insn and _fatal_insn_not_found. Go through
fancy_abort.
(trim_filename, fancy_abort): Delete.
* builtins.c (expand_builtin_args_info): Report ICE with abort.
* except.c (start_catch_handler): Report ICE with error/abort
combo.
* final.c (output_operand_lossage): Likewise.
* flow.c (verify_flow_info): Likewise.
* gcc.c: Prototype fatal.
* gengenrtl.c: Undef abort after including rtl.h not system.h.
* genattr.c, genattrtab.c, genemit.c, genextract.c,
genflags.c, genopinit.c, genoutput.c, genpeep.c, genrecog.c:
Don't define fancy_abort.
From-SVN: r28889
1999-08-19 14:44 -0700 Zack Weinberg <zack@bitmover.com>
* rtl.def (NOTE): Change format to "iuu0n".
(ADDR_DIFF_VEC): Change format to "eEee0".
(ADDRESSOF): Change format to "eit".
* rtl.h (rtvec): Make "elem" an array of rtx, not rtunion.
(RTVEC_ELT): Change to match.
(XVECEXP): Use XVEC and RTVEC_ELT.
(INSN_UID, INSN_CODE, CODE_LABEL_NUMBER, NOTE_LINE_NUMBER,
ADDRESSOF_REGNO, REGNO, SUBREG_WORD): Use XINT.
(PREV_INSN, NEXT_INSN, PATTERN, REG_NOTES,
CALL_INSN_FUNCTION_USAGE, SUBREG_REG, SET_SRC, SET_DEST,
TRAP_CONDITION, TRAP_CODE): Use XEXP.
(INTVAL): Use XWINT.
(ADDRESSOF_DECL): Use XTREE.
(SET_ADDRESSOF_DECL): Delete.
(NOTE_DECL_NAME, NOTE_DECL_CODE, NOTE_DECL_RTL,
NOTE_DECL_IDENTIFIER, NOTE_DECL_TYPE): Kill. These have been
ifdefed out since 2.6 at least.
(gen_rtvec_vv): Delete prototype.
* rtl.h (rtvec_alloc): rt->elem is now an array of rtx,
not rtunion.
(copy_most_rtx): Handle 't' format letter.
* emit-rtl.c (gen_rtvec_v): rt_val->elem is an array of rtx.
(gen_rtvec_vv): Delete function. All callers changed to use
gen_rtvec_v instead.
* print-rtl.c (print_rtx): Move special casing of NOTEs to
the '0' format letter.
* function.c (gen_mem_addressof): Don't use
SET_ADDRESSOF_DECL; provide `decl' to gen_rtx_ADDRESSOF
instead.
* integrate.c (copy_rtx_and_substitute): Likewise.
Copy 't' slots with XTREE.
(subst_constants): Treat 't' slots like '[swi]' slots.
* cse.c (canon_hash, exp_equiv_p): Treat 't' slots like '0' slots.
* jump.c (rtx_equal_for_thread_p): Likewise.
* rtlanal.c (rtx_equal_p): Likewise.
* stmt.c (expand_end_case): gen_rtx_ADDR_DIFF_VEC now takes
only four arguments.
* gengenrtl.c (type_from_format): Provide correct types for
'b' and 't' slots.
* tree.h [ENABLE_CHECKING] (TREE_CHECK, TREE_CLASS_CHECK):
If a recent gcc is in use (always in stage2 and beyond), use
statement expressions, so we don't make a function call unless
the check fails. Evaluate arguments exactly once.
(CHAIN_CHECK, DO_CHECK, DO_CHECK1, TREE_CHECK1,
TREE_CLASS_CHECK1, TYPE_CHECK1, DECL_CHECK1, CST_CHECK1):
Delete.
(CST_OR_CONSTRUCTOR_CHECK, EXPR_CHECK): Redefine such that
they evaluate their arguments exactly once, irrespective of
the compiler in use.
* tree.c [ENABLE_CHECKING]: Define whichever set of functions
is used by the currently-enabled check macros. This is:
(tree_check_failed, tree_class_check_failed): For gcc.
(tree_check, tree_class_check, cst_or_constructor_check,
expr_check): For other compilers.
* gencheck.c: Do not define any *_CHECK1 macros.
From-SVN: r28769
* emit-rtl.c (gen_rtx_CONST_DOUBLE): New function.
(gen_rtx): Call it. Tidy cases.
* rtl.h (gen_rtx_CONST_DOUBLE): Prototype it.
* gengenrtl.c: Add commentary.
(special_rtx): Also match CONST_DOUBLE.
(gencode): Emit call to memset instead of bzero.
From-SVN: r26110
* invoke.texi (-fstrict-aliasing): Document.
* rtl.texi (MEM_ALIAS_SET): Document.
* flags.h (flag_strict_aliasing): Declare.
* toplev.c (flag_strict_aliasing): Define.
(f_options): Add -strict-aliasing.
(main): Set flag_strict_aliasing if -O2 or higher.
* tree.h (tree_type): Add alias_set field.
(TYPE_ALIAS_SET): New macro.
(TYPE_ALIAS_SET_KNOWN_P): Likewise.
(get_alias_set): Declare.
* tree.c (lang_get_alias_set): Define.
(make_node): Initialize TYPE_ALIAS_SET.
(get_alias_set): New function.
* print-tree.c (print_node): Dump the alias set for a type.
* c-tree.h (c_get_alias_set): Declare.
* c-common.c (c_get_alias_set): New function.
* c-decl.c (init_decl_processing): Set lang_get_alias_set.
* expr.c (protect_from_queue): Propogage alias sets.
(expand_assignment): Calculate alias set for new MEMs.
(expand_expr): Likewise.
* function.c (put_var_into_stack): Likewise.
(put_reg_into_stack): Likewise.
(gen_mem_addressof): Likewise.
(assign_parms): Likewise.
* stmt.c (expand_decl): Likewise.
* varasm.c (make_decl_rtl): Eliminate redundant clearing of
DECL_RTL. Calculate alias set for new MEMs.
* rtl.def (REG): Add dummy operand.
(MEM): Add extra operand to store the MEM_ALIAS_SET.
* rtl.h (MEM_ALIAS_SET): New macro.
(gen_rtx_MEM): Declare.
* emit-rtl.c (gen_rtx_MEM): New function.
* gengenrtl.c (sepcial_rtx): Make MEMs special.
* alias.c (CHECK_ALIAS_SETS_FOR_CONSISTENCY): New macro.
(DIFFERENT_ALIAS_SETS_P): Likewise.
(canon_rtx): Propogate the alias set to the new MEM.
(true_dependence): Check the alias sets.
(anti_dependence): Likewise.
(output_dependence): Likewise.
* explow.c (stabilize): Progoate alias sets.
* integrate.c (copy_rtx_and_substitute): Likewise.
* final.c (alter_subreg): Make sure not to leave MEM_IN_STRUCT_P
in an unpredictable state. Propogate alias sets.
* reload1.c (reload): Clear MEM_ALIAS_SET for new MEMs about which
we have no alias information.
From-SVN: r20719
ANSI does not allow a prototype to specify an item smaller than an int
if the function uses an old-style definition. This only worked as a
GNUC extension, so stop doing it.
* gengenrtl.c (type_from_format, accessor_from_format): Change
type of parameter `c' from `char' to `int'.
From-SVN: r19922
* Makefile.in (HOST_RTL): Add $(HOST_PREFIX)bitmap.o.
(rtl.o, emit-rtl.o): Add dependency on bitmap.h.
($(HOST_PREFIX_1)rtl.o): Likewise.
($(HOST_PREFIX_1)bitmap.o): New host object.
* emit-rtl.c (toplevel): Include bitmap.h.
(gen_rtx): Handle 't' and 'b' nodes.
* print-rtl.c (print_rtx): Handle printing NOTE_INSN_LIVE notes.
Print block number for block begin/end notes. Print 't' type
nodes as a pointer. Know that the 3rd argument of live range
start/stop notes is really a range_info rtx. If type is 'b', print
out argument as a bitmap.
* rtl.c: Include bitmap.c.
(copy_rtx): Copy tree nodes as is. Copy bitmaps if type is 'b'.
(note_insn_name): Add NOTE_INSN_RANGE_{START,END}, NOTE_INSN_LIVE.
* rtl.def (RANGE_LIVE): New node to hold live information while we
recalculate the basic blocks.
(RANGE_REG, RANGE_INFO): New rtl types for live range splitting.
(RANGE_VAR): New node, to hold information saved in symbol node for New
communicating live range information to the debug output functions.
* rtl.h (rtunion_def): Add rttree and rtbit fields.
(XBITMAP, XTREE): New accessor macros.
(NOTE_LIVE_INFO): Overload NOTE_SOURCE_FILE for NOTE_INSN_LIVE notes.
(NOTE_RANGE_INFO): Similarly for NOTE_INSN_RANGE_{START,END} notes.
(NOTE_BLOCK_LIVE_RANGE_BLOCK): Define.
(NOTE_INSN_RANGE_START, NOTE_INSN_RANGE_END, NOTE_INSN_LIVE): New notes.
(RANGE_LIVE_{BITMAP,ORIG_BLOCK}): New accessor macros.
(RANGE_REG_{SYMBOL,BLOCK}_NODE, RANGE_VAR_*): New accessor macros.
(RANGE_INFO_*): Likewise.
* sched.c (sched_analyze): Keep live range start/stop notes.
(unlink_other_notes): Likewise.
* haifa-sched.c (sched_analyze): Keep live range start/stop notes.
(unlink_other_notes): Likewise.
* tree.h (BLOCK_LIVE_RANGE_{START,END,VAR_FLAG}): New accessor macros.
(BLOCK_LIVE_RANGE_FLAG): Likewise.
(DECL_LIVE_RANGE_RTL): Likewise.
(struct tree_block): Add live_range_flag, live_range_var_flag,
live_range_start and live_range_end.
(struct tree_decl): Add live_range_rtl field.
* gengenrtl.c (type_from_format): Handle 'b' and 't'.
(accessor_from_format): Likewise.
Co-Authored-By: Jeffrey A Law <law@cygnus.com>
From-SVN: r19727
* Makefile.in (c-lang.o): Depend on c-tree.h, c-lex.h and toplev.h.
(c-lex.o): Depend on output.h.
(c-common.o): Likewise.
(stmt.o): Likewise.
(calls.o): Likewise.
(integrate.o): Depend on toplev.h.
(regclass.o): Depend on output.h.
(final.o): Depend on reload.h.
* c-common.c: Include output.h.
(check_format_info): Remove unused variable `integral_format'.
* c-decl.c (print_lang_decl): Mark parameters `file', `node' and
`indent' with ATTRIBUTE_UNUSED.
(print_lang_type): Likewise.
(maybe_build_cleanup): Likewise for parameter `decl'.
(copy_lang_decl): Likewise for parameter `node'.
* c-lang.c: Include c-tree.h, c-lex.h and toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(lookup_interface): Likewise for parameter `arg'.
(is_class_name): Likewise.
(maybe_objc_check_decl): Likewise for parameter `decl'.
(maybe_objc_comptypes): Likewise for parameters `lhs', `rhs' and
`reflexive'.
(maybe_objc_method_name): Likewise for parameter `decl'.
(build_objc_string): Likewise for parameters `len' and `str'.
* c-lex.c: Include output.h.
* c-lex.h (position_after_white_space): Correct typo in prototype.
* c-tree.h (finish_file, c_expand_start_cond, c_expand_start_else,
c_expand_end_cond, init_iterators): Add prototypes.
* caller-save.c (set_reg_live): Mark parameters `reg' and `setter'
with ATTRIBUTE_UNUSED.
* calls.c: Include output.h.
* cccp.c (pipe_closed): Mark parameter `signo' with
ATTRIBUTE_UNUSED.
* combine.c: Move inclusion of expr.h to after insn-config.h.
* iris6.h (ASM_IDENTIFY_GCC, ASM_IDENTIFY_LANGUAGE): Don't define
as empty, rather define as ((void)0).
* sparc.c (sparc_check_64): Add braces around ambiguous `else'.
Add parentheses around assignment used as truth value.
* cplus-dem.c (squangle_mop_up): Change return type to void.
(internal_cplus_demangle): Remove unused parameter `options'.
All callers changed.
(cplus_demangle_opname): Remove function wide variable `int i' and
replace with `size_t i' at each location where it is used.
(cplus_demangle_opname): change type of `i' from int to size_t.
* cppexp.c (right_shift): Mark parameter `pfile' with
ATTRIBUTE_UNUSED.
* cpphash.c (cpp_lookup): Likewise.
(cpp_hash_cleanup): Likewise.
* cpplib.c (parse_name): Add a prototype and make it static.
(null_underflow): Mark parameter `pfile' with ATTRIBUTE_UNUSED.
(null_cleanup): Likewise for parameters `pbuf' and `pfile'.
(macro_cleanup): Likewise for parameter `pfile'.
(file_cleanup): Likewise.
* cpplib.h (cpp_reader_init, cpp_options_init, cpp_start_read,
cpp_read_check_assertion, skip_rest_of_line): Add prototypes.
* crtstuff.c (force_to_data, __CTOR_LIST__, force_to_data,
__DTOR_END__, __FRAME_END__): Mark with ATTRIBUTE_UNUSED.
* cse.c (cse_check_loop_start): Mark parameter `set' with
ATTRIBUTE_UNUSED.
* dbxout.c (flag_minimal_debug, have_used_extensions,
source_label_number): Move inside macro wrapper check against
defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO).
* dwarf2out.c (gen_entry_point_die): Hide prototype and definition.
* except.h (doing_eh): Provide prototype.
* expr.c: Move inclusion of expr.h to after insn-config.h.
* final.c: Include reload.h.
(shorten_branches): Cast the first argument of bzero to char *.
* fix-header.c (cpp_print_containing_files): Mark parameter
`pfile' with ATTRIBUTE_UNUSED.
(cpp_fatal): Likewise.
* flow.c (find_basic_blocks_1): Cast the first argument of bzero
to char *.
* genattrtab.c (make_length_attrs): Change the type of variable
`i' from int to size_t.
(zero_fn): Mark parameter `exp' with ATTRIBUTE_UNUSED.
(one_fn): Likewise.
* genextract.c (main): When generating insn-extract.c, mark
variable `junk' with ATTRIBUTE_UNUSED.
* gengenrtl.c (gencode): When generating genrtl.c, cast the first
argument of bzero to char*.
* integrate.c: Include toplev.h.
* libgcc2.c: Wrap `struct exception_table' and
`find_exception_handler' in macro DWARF2_UNWIND_INFO.
* objc/Make-lang.in (objc-act.o): Depend on toplev.h.
* objc/objc-act.c: Include toplev.h.
(lang_print_xnode): Mark parameters `file', `node' and `indent'
with ATTRIBUTE_UNUSED.
(finish_protocol): Likewise for parameter `protocol'.
* output.h (declare_weak): Add prototype.
(decode_reg_name): Don't wrap with TREE_CODE macro.
(assemble_alias): Add prototype.
* regclass.c: Include output.h.
* reload.h (reloads_conflict): Add prototype.
* rtl.h (print_rtl_single, mark_elimiation, reg_class_subset_p,
output_func_start_profiler): Add prototypes.
* rtlanal.c (reg_set_p_1): Mark parameters `x' and `pat' with
ATTRIBUTE_UNUSED.
* scan-decls.c: Include scan.h.
* scan.h (recognized_function, recognized_extern): Add prototypes.
* stmt.c: Include output.h.
* toplev.c (error_for_asm, warning_for_asm): Remove prototypes.
(output_lang_identify): Hide prototype and definition.
(float_signal): Mark parameter `signo' with ATTRIBUTE_UNUSED.
(pipe_closed): Likewise.
* toplev.h (count_error, strip_off_ending, error_for_asm,
warning_for_asm): Add prototypes.
From-SVN: r19712
* gengenrtl.c (type_from_format): De-ANSIfy function signature.
(accessor_from_format): Likewise.
(xmalloc): New function for use when linking with alloca.o.
From-SVN: r17386
