1997-08-12 03:47:32 -04:00
|
|
|
|
# Top level makefile fragment for GNU Fortran. -*-makefile-*-
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
# Copyright (C) 1995-1998 Free Software Foundation, Inc.
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
#This file is part of GNU Fortran.
|
|
|
|
|
|
|
|
|
|
|
|
#GNU Fortran is free software; you can redistribute it and/or modify
|
|
|
|
|
|
#it under the terms of the GNU General Public License as published by
|
|
|
|
|
|
#the Free Software Foundation; either version 2, or (at your option)
|
|
|
|
|
|
#any later version.
|
|
|
|
|
|
|
|
|
|
|
|
#GNU Fortran is distributed in the hope that it will be useful,
|
|
|
|
|
|
#but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
|
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
|
#GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
|
|
#You should have received a copy of the GNU General Public License
|
|
|
|
|
|
#along with GNU Fortran; see the file COPYING. If not, write to
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
#the Free Software Foundation, 59 Temple Place - Suite 330,
|
|
|
|
|
|
#Boston, MA 02111-1307, USA.
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
# This file provides the language dependent support in the main Makefile.
|
|
|
|
|
|
# Each language makefile fragment must provide the following targets:
|
|
|
|
|
|
#
|
|
|
|
|
|
# foo.all.build, foo.all.cross, foo.start.encap, foo.rest.encap,
|
|
|
|
|
|
# foo.info, foo.dvi,
|
|
|
|
|
|
# foo.install-normal, foo.install-common, foo.install-info, foo.install-man,
|
|
|
|
|
|
# foo.uninstall, foo.distdir,
|
|
|
|
|
|
# foo.mostlyclean, foo.clean, foo.distclean, foo.extraclean,
|
|
|
|
|
|
# foo.maintainer-clean, foo.stage1, foo.stage2, foo.stage3, foo.stage4
|
|
|
|
|
|
#
|
|
|
|
|
|
# where `foo' is the name of the language.
|
|
|
|
|
|
#
|
|
|
|
|
|
# It should also provide rules for:
|
|
|
|
|
|
#
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
# - making any compiler driver (eg: g++)
|
|
|
|
|
|
# - the compiler proper (eg: cc1plus)
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# - define the names for selecting the language in LANGUAGES.
|
|
|
|
|
|
#
|
|
|
|
|
|
# $(srcdir) must be set to the gcc/ source directory (not gcc/f/).
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
# Actual name to use when installing a native compiler.
|
1997-08-12 03:47:32 -04:00
|
|
|
|
G77_INSTALL_NAME = `t='$(program_transform_name)'; echo g77 | sed $$t`
|
|
|
|
|
|
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
# Actual name to use when installing a cross-compiler.
|
1997-08-12 03:47:32 -04:00
|
|
|
|
G77_CROSS_NAME = `t='$(program_transform_cross_name)'; echo g77 | sed $$t`
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Define the names for selecting f77 in LANGUAGES.
|
|
|
|
|
|
# Note that it would be nice to move the dependency on g77
|
|
|
|
|
|
# into the F77 rule, but that needs a little bit of work
|
|
|
|
|
|
# to do the right thing within all.cross.
|
1998-03-21 18:49:35 -05:00
|
|
|
|
F77 f77: f771$(exeext)
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
# Tell GNU make to ignore these if they exist.
|
1998-01-31 20:30:56 -05:00
|
|
|
|
.PHONY: F77 f77 f77.all.build f77.all.cross \
|
|
|
|
|
|
f77.start.encap f77.rest.encap f77.info f77.dvi \
|
1998-03-04 11:35:10 -05:00
|
|
|
|
f77.install-normal \
|
1998-01-31 20:30:56 -05:00
|
|
|
|
f77.install-common f77.install-info f77.install-man \
|
|
|
|
|
|
f77.uninstall f77.mostlyclean f77.clean f77.distclean \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
f77.extraclean f77.maintainer-clean f77.distdir f77.rebuilt \
|
|
|
|
|
|
f77.stage1 f77.stage2 f77.stage3 f77.stage4
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-10-13 14:09:13 -04:00
|
|
|
|
g77.c: $(srcdir)/gcc.c
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
rm -f g77.c; \
|
|
|
|
|
|
$(LN_S) $(srcdir)/gcc.c g77.c; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-10-13 14:09:13 -04:00
|
|
|
|
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
g77spec.o: $(srcdir)/f/g77spec.c $(srcdir)/f/version.h
|
|
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/f/g77spec.c; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
|
|
|
|
|
|
g77version.o: $(srcdir)/f/version.c
|
|
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -o g77version.o \
|
|
|
|
|
|
$(srcdir)/f/version.c; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-10-13 14:09:13 -04:00
|
|
|
|
|
|
|
|
|
|
# N.B.: This is a copy of the gcc.o rule, with -DLANG_SPECIFIC_DRIVER added.
|
|
|
|
|
|
# It'd be nice if we could find an easier way to do this---rather than have
|
|
|
|
|
|
# to track changes to the toplevel gcc Makefile as well.
|
|
|
|
|
|
# We depend on g77.c last, to make it obvious where it came from.
|
|
|
|
|
|
g77.o: $(CONFIG_H) multilib.h config.status $(lang_specs_files) g77.c
|
1998-08-13 20:18:56 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(DRIVER_DEFINES) \
|
|
|
|
|
|
-DLANG_SPECIFIC_DRIVER -c g77.c; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-10-13 14:09:13 -04:00
|
|
|
|
|
|
|
|
|
|
# Create the compiler driver for g77.
|
1998-06-27 07:23:25 -04:00
|
|
|
|
g77$(exeext): g77.o g77spec.o g77version.o version.o choose-temp.o pexecute.o prefix.o mkstemp.o \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
$(LIBDEPS) $(EXTRA_GCC_OBJS)
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ g77.o g77spec.o g77version.o \
|
1998-06-27 07:23:25 -04:00
|
|
|
|
version.o choose-temp.o pexecute.o prefix.o mkstemp.o $(EXTRA_GCC_OBJS) $(LIBS); \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-10-13 14:09:13 -04:00
|
|
|
|
|
|
|
|
|
|
# Create a version of the g77 driver which calls the cross-compiler.
|
|
|
|
|
|
g77-cross$(exeext): g77$(exeext)
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
if [ -f lang-f77 ]; then \
|
|
|
|
|
|
rm -f g77-cross$(exeext); \
|
|
|
|
|
|
cp g77$(exeext) g77-cross$(exeext); \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
F77_SRCS = \
|
|
|
|
|
|
$(srcdir)/f/assert.j \
|
|
|
|
|
|
$(srcdir)/f/bad.c \
|
|
|
|
|
|
$(srcdir)/f/bad.def \
|
|
|
|
|
|
$(srcdir)/f/bad.h \
|
|
|
|
|
|
$(srcdir)/f/bit.c \
|
|
|
|
|
|
$(srcdir)/f/bit.h \
|
|
|
|
|
|
$(srcdir)/f/bld-op.def \
|
|
|
|
|
|
$(srcdir)/f/bld.c \
|
|
|
|
|
|
$(srcdir)/f/bld.h \
|
|
|
|
|
|
$(srcdir)/f/com-rt.def \
|
|
|
|
|
|
$(srcdir)/f/com.c \
|
|
|
|
|
|
$(srcdir)/f/com.h \
|
|
|
|
|
|
$(srcdir)/f/config.j \
|
|
|
|
|
|
$(srcdir)/f/convert.j \
|
|
|
|
|
|
$(srcdir)/f/data.c \
|
|
|
|
|
|
$(srcdir)/f/data.h \
|
|
|
|
|
|
$(srcdir)/f/equiv.c \
|
|
|
|
|
|
$(srcdir)/f/equiv.h \
|
|
|
|
|
|
$(srcdir)/f/expr.c \
|
|
|
|
|
|
$(srcdir)/f/expr.h \
|
|
|
|
|
|
$(srcdir)/f/fini.c \
|
|
|
|
|
|
$(srcdir)/f/flags.j \
|
|
|
|
|
|
$(srcdir)/f/glimits.j \
|
|
|
|
|
|
$(srcdir)/f/global.c \
|
|
|
|
|
|
$(srcdir)/f/global.h \
|
|
|
|
|
|
$(srcdir)/f/hconfig.j \
|
|
|
|
|
|
$(srcdir)/f/implic.c \
|
|
|
|
|
|
$(srcdir)/f/implic.h \
|
|
|
|
|
|
$(srcdir)/f/input.j \
|
|
|
|
|
|
$(srcdir)/f/info-b.def \
|
|
|
|
|
|
$(srcdir)/f/info-k.def \
|
|
|
|
|
|
$(srcdir)/f/info-w.def \
|
|
|
|
|
|
$(srcdir)/f/info.c \
|
|
|
|
|
|
$(srcdir)/f/info.h \
|
|
|
|
|
|
$(srcdir)/f/intrin.c \
|
|
|
|
|
|
$(srcdir)/f/intrin.def \
|
|
|
|
|
|
$(srcdir)/f/intrin.h \
|
|
|
|
|
|
$(srcdir)/f/lab.c \
|
|
|
|
|
|
$(srcdir)/f/lab.h \
|
|
|
|
|
|
$(srcdir)/f/lex.c \
|
|
|
|
|
|
$(srcdir)/f/lex.h \
|
|
|
|
|
|
$(srcdir)/f/malloc.c \
|
|
|
|
|
|
$(srcdir)/f/malloc.h \
|
|
|
|
|
|
$(srcdir)/f/name.c \
|
|
|
|
|
|
$(srcdir)/f/name.h \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
$(srcdir)/f/output.j \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
$(srcdir)/f/parse.c \
|
|
|
|
|
|
$(srcdir)/f/proj.c \
|
|
|
|
|
|
$(srcdir)/f/proj.h \
|
|
|
|
|
|
$(srcdir)/f/rtl.j \
|
|
|
|
|
|
$(srcdir)/f/src.c \
|
|
|
|
|
|
$(srcdir)/f/src.h \
|
|
|
|
|
|
$(srcdir)/f/st.c \
|
|
|
|
|
|
$(srcdir)/f/st.h \
|
|
|
|
|
|
$(srcdir)/f/sta.c \
|
|
|
|
|
|
$(srcdir)/f/sta.h \
|
|
|
|
|
|
$(srcdir)/f/stb.c \
|
|
|
|
|
|
$(srcdir)/f/stb.h \
|
|
|
|
|
|
$(srcdir)/f/stc.c \
|
|
|
|
|
|
$(srcdir)/f/stc.h \
|
|
|
|
|
|
$(srcdir)/f/std.c \
|
|
|
|
|
|
$(srcdir)/f/std.h \
|
|
|
|
|
|
$(srcdir)/f/ste.c \
|
|
|
|
|
|
$(srcdir)/f/ste.h \
|
|
|
|
|
|
$(srcdir)/f/storag.c \
|
|
|
|
|
|
$(srcdir)/f/storag.h \
|
|
|
|
|
|
$(srcdir)/f/stp.c \
|
|
|
|
|
|
$(srcdir)/f/stp.h \
|
|
|
|
|
|
$(srcdir)/f/str-1t.fin \
|
|
|
|
|
|
$(srcdir)/f/str-2t.fin \
|
|
|
|
|
|
$(srcdir)/f/str-fo.fin \
|
|
|
|
|
|
$(srcdir)/f/str-io.fin \
|
|
|
|
|
|
$(srcdir)/f/str-nq.fin \
|
|
|
|
|
|
$(srcdir)/f/str-op.fin \
|
|
|
|
|
|
$(srcdir)/f/str-ot.fin \
|
|
|
|
|
|
$(srcdir)/f/str.c \
|
|
|
|
|
|
$(srcdir)/f/str.h \
|
|
|
|
|
|
$(srcdir)/f/sts.c \
|
|
|
|
|
|
$(srcdir)/f/sts.h \
|
|
|
|
|
|
$(srcdir)/f/stt.c \
|
|
|
|
|
|
$(srcdir)/f/stt.h \
|
|
|
|
|
|
$(srcdir)/f/stu.c \
|
|
|
|
|
|
$(srcdir)/f/stu.h \
|
|
|
|
|
|
$(srcdir)/f/stv.c \
|
|
|
|
|
|
$(srcdir)/f/stv.h \
|
|
|
|
|
|
$(srcdir)/f/stw.c \
|
|
|
|
|
|
$(srcdir)/f/stw.h \
|
|
|
|
|
|
$(srcdir)/f/symbol.c \
|
|
|
|
|
|
$(srcdir)/f/symbol.def \
|
|
|
|
|
|
$(srcdir)/f/symbol.h \
|
1998-06-15 22:23:44 -04:00
|
|
|
|
$(srcdir)/f/system.j \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
$(srcdir)/f/target.c \
|
|
|
|
|
|
$(srcdir)/f/target.h \
|
|
|
|
|
|
$(srcdir)/f/tconfig.j \
|
|
|
|
|
|
$(srcdir)/f/tm.j \
|
|
|
|
|
|
$(srcdir)/f/top.c \
|
|
|
|
|
|
$(srcdir)/f/top.h \
|
1998-06-15 22:23:44 -04:00
|
|
|
|
$(srcdir)/f/toplev.j \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
$(srcdir)/f/tree.j \
|
|
|
|
|
|
$(srcdir)/f/type.c \
|
|
|
|
|
|
$(srcdir)/f/type.h \
|
1997-08-17 19:33:04 -04:00
|
|
|
|
$(srcdir)/f/version.c \
|
1997-08-18 11:01:55 -04:00
|
|
|
|
$(srcdir)/f/version.h \
|
|
|
|
|
|
$(srcdir)/f/where.c \
|
|
|
|
|
|
$(srcdir)/f/where.h
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
f771$(exeext): $(P) $(F77_SRCS) $(LIBDEPS) stamp-objlist
|
|
|
|
|
|
touch lang-f77
|
|
|
|
|
|
cd f; $(MAKE) $(FLAGS_TO_PASS) \
|
|
|
|
|
|
HOST_CC="$(HOST_CC)" HOST_CFLAGS="$(HOST_CFLAGS)" HOST_CPPFLAGS="$(HOST_CPPFLAGS)" \
|
|
|
|
|
|
../f771$(exeext)
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Build hooks:
|
|
|
|
|
|
|
1998-01-31 20:30:56 -05:00
|
|
|
|
f77.all.build: g77$(exeext)
|
|
|
|
|
|
f77.all.cross: g77-cross$(exeext)
|
|
|
|
|
|
f77.start.encap: g77$(exeext)
|
|
|
|
|
|
f77.rest.encap:
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-09-14 23:02:41 -04:00
|
|
|
|
f77.info: f/g77.info
|
|
|
|
|
|
f77.dvi: f/g77.dvi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
# g77 documentation.
|
1997-09-14 23:02:41 -04:00
|
|
|
|
f/g77.info: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
|
1997-09-23 02:38:19 -04:00
|
|
|
|
$(srcdir)/f/g77install.texi $(srcdir)/f/news.texi \
|
1997-09-14 23:02:41 -04:00
|
|
|
|
$(srcdir)/f/intdoc.texi
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
1998-06-19 10:30:11 -04:00
|
|
|
|
rm -f $(srcdir)/f/g77.info-*; \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
$(MAKEINFO) -I$(srcdir)/f -o f/g77.info $(srcdir)/f/g77.texi; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-09-14 23:02:41 -04:00
|
|
|
|
f/g77.dvi: $(srcdir)/f/g77.texi $(srcdir)/f/bugs.texi \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
$(srcdir)/f/g77install.texi $(srcdir)/f/news.texi \
|
|
|
|
|
|
$(srcdir)/f/intdoc.texi
|
|
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
1998-08-08 23:59:14 -04:00
|
|
|
|
# `tex2dvi' was used below, but the Texinfo 3.12 one won't work properly
|
|
|
|
|
|
# with the include files from $(srcdir). This use of TEXINPUTS may not
|
|
|
|
|
|
# be universally valid. `$(TEX)' should be used if it gets defined in
|
|
|
|
|
|
# gcc/Makefile.in.
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
if [ -f lang-f77 ]; then \
|
1998-08-08 23:59:14 -04:00
|
|
|
|
TEXINPUTS=$(srcdir)/f:$$TEXINPUTS tex $(srcdir)/f/g77.texi; \
|
|
|
|
|
|
texindex g77.??; \
|
|
|
|
|
|
TEXINPUTS=$(srcdir)/f:$$TEXINPUTS tex $(srcdir)/f/g77.texi; \
|
|
|
|
|
|
mv g77.dvi f; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-08-27 23:21:05 -04:00
|
|
|
|
# This dance is all about producing accurate documentation for g77's
|
|
|
|
|
|
# intrinsics with minimum fuss. f/ansify appends "\n\" to C strings
|
|
|
|
|
|
# so ANSI C compilers can compile f/intdoc.h -- gcc can compile f/intdoc.in
|
|
|
|
|
|
# directly, if f/intdoc.c #include'd that, but we don't want to force
|
|
|
|
|
|
# people to install gcc just to build the documentation. We use the
|
|
|
|
|
|
# C format for f/intdoc.in in the first place to allow a fairly "free",
|
|
|
|
|
|
# but widely known format for documentation -- basically anyone who knows
|
|
|
|
|
|
# how to write texinfo source and enclose it in C constants can handle
|
|
|
|
|
|
# it, and f/ansify allows them to not even end lines with "\n\". So,
|
|
|
|
|
|
# essentially, the C preprocessor and compiler are used to enter the
|
|
|
|
|
|
# document snippets into a data base via name lookup, rather than duplicating
|
|
|
|
|
|
# that kind of code here. And we use f/intdoc.c instead of straight
|
|
|
|
|
|
# texinfo in the first place so that as much information as possible
|
|
|
|
|
|
# contained in f/intrin.def can be inserted directly and reliably into
|
|
|
|
|
|
# the documentation. That's better than replicating it, because it
|
|
|
|
|
|
# reduces the likelihood of discrepancies between the docs and the compiler
|
|
|
|
|
|
# itself, which uses f/intrin.def; in fact, many bugs in f/intrin.def have
|
|
|
|
|
|
# been found only upon reading the documentation that was automatically
|
|
|
|
|
|
# produced from it.
|
|
|
|
|
|
$(srcdir)/f/intdoc.texi: f/intdoc.c f/intdoc.in f/ansify.c f/intrin.def f/intrin.h
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 ]; then \
|
1998-06-19 01:49:20 -04:00
|
|
|
|
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(INCLUDES) \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
`echo $(srcdir)/f/ansify.c | sed 's,^\./,,'` -o f/ansify; \
|
|
|
|
|
|
f/ansify < $(srcdir)/f/intdoc.in > f/intdoc.h0 $(srcdir)/f/intdoc.in; \
|
1998-06-19 10:30:11 -04:00
|
|
|
|
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) $(INCLUDES) -I./f \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
`echo $(srcdir)/f/intdoc.c | sed 's,^\./,,'` -o f/intdoc; \
|
|
|
|
|
|
f/intdoc > $(srcdir)/f/intdoc.texi; \
|
|
|
|
|
|
rm f/intdoc f/ansify f/intdoc.h0; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
$(srcdir)/f/BUGS: f/bugs0.texi f/bugs.texi
|
|
|
|
|
|
cd $(srcdir)/f; $(MAKEINFO) -D BUGSONLY --no-header --no-split \
|
1998-04-30 15:01:09 -04:00
|
|
|
|
--no-validate -o BUGS bugs0.texi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-09-23 02:38:19 -04:00
|
|
|
|
$(srcdir)/f/INSTALL: f/install0.texi f/g77install.texi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
cd $(srcdir)/f; $(MAKEINFO) -D INSTALLONLY --no-header --no-split \
|
1998-04-30 15:01:09 -04:00
|
|
|
|
--no-validate -o INSTALL install0.texi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
$(srcdir)/f/NEWS: f/news0.texi f/news.texi
|
|
|
|
|
|
cd $(srcdir)/f; $(MAKEINFO) -D NEWSONLY --no-header --no-split \
|
1998-04-30 15:01:09 -04:00
|
|
|
|
--no-validate -o NEWS news0.texi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1998-07-15 03:15:52 -04:00
|
|
|
|
f77.rebuilt: f/g77.info $(srcdir)/f/BUGS $(srcdir)/f/INSTALL \
|
1998-01-31 20:30:56 -05:00
|
|
|
|
$(srcdir)/f/NEWS
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Install hooks:
|
|
|
|
|
|
# f771 is installed elsewhere as part of $(COMPILERS).
|
|
|
|
|
|
|
1998-03-04 11:35:10 -05:00
|
|
|
|
f77.install-normal:
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
# Install the driver program as $(target)-g77
|
|
|
|
|
|
# and also as either g77 (if native) or $(tooldir)/bin/g77.
|
|
|
|
|
|
f77.install-common:
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
-if [ -f lang-f77 -a -f f771$(exeext) ] ; then \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
if [ -f g77-cross$(exeext) ] ; then \
|
|
|
|
|
|
rm -f $(bindir)/$(G77_CROSS_NAME)$(exeext); \
|
|
|
|
|
|
$(INSTALL_PROGRAM) g77-cross$(exeext) $(bindir)/$(G77_CROSS_NAME)$(exeext); \
|
|
|
|
|
|
chmod a+x $(bindir)/$(G77_CROSS_NAME)$(exeext); \
|
|
|
|
|
|
else \
|
|
|
|
|
|
rm -f $(bindir)/$(G77_INSTALL_NAME)$(exeext); \
|
|
|
|
|
|
$(INSTALL_PROGRAM) g77$(exeext) $(bindir)/$(G77_INSTALL_NAME)$(exeext); \
|
|
|
|
|
|
chmod a+x $(bindir)/$(G77_INSTALL_NAME)$(exeext); \
|
|
|
|
|
|
fi ; \
|
|
|
|
|
|
else true; fi
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
@if [ -f f77-install-ok -o -f $(srcdir)/f77-install-ok ]; then \
|
|
|
|
|
|
echo ''; \
|
|
|
|
|
|
echo 'Warning: egcs no longer installs an f77 command.'; \
|
|
|
|
|
|
echo ' You must do so yourself. For more information,'; \
|
|
|
|
|
|
echo ' read "Distributing Binaries" in the egcs g77 docs.'; \
|
|
|
|
|
|
echo ' (To turn off this warning, delete the file'; \
|
|
|
|
|
|
echo ' f77-install-ok in the source or build directory.)'; \
|
|
|
|
|
|
echo ''; \
|
|
|
|
|
|
fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1997-08-24 20:25:22 -04:00
|
|
|
|
# $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
|
|
|
|
|
|
# to do the install. The sed rule was copied from stmp-int-hdrs.
|
1997-11-20 02:56:28 -05:00
|
|
|
|
f77.install-info: f77.info
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
if [ -f lang-f77 -a -f f/g77.info ] ; then \
|
1998-02-22 14:28:41 -05:00
|
|
|
|
rm -f $(infodir)/g77.info*; \
|
|
|
|
|
|
for f in f/g77.info*; do \
|
|
|
|
|
|
realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
|
|
|
|
|
|
$(INSTALL_DATA) $$f $(infodir)/$$realfile; \
|
|
|
|
|
|
done; \
|
1998-02-22 14:37:26 -05:00
|
|
|
|
chmod a-x $(infodir)/g77.info*; \
|
1998-08-18 16:42:49 -04:00
|
|
|
|
else true; fi
|
1998-05-22 06:25:34 -04:00
|
|
|
|
@if [ -f lang-f77 -a -f $(srcdir)/f/g77.info ] ; then \
|
|
|
|
|
|
if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
|
|
|
|
|
|
echo " install-info --info-dir=$(infodir) $(infodir)/g77.info"; \
|
|
|
|
|
|
install-info --info-dir=$(infodir) $(infodir)/g77.info || : ; \
|
|
|
|
|
|
else : ; fi; \
|
|
|
|
|
|
else : ; fi
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
|
|
|
|
|
f77.install-man: $(srcdir)/f/g77.1
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
-if [ -f lang-f77 -a -f f771$(exeext) ] ; then \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
if [ -f g77-cross$(exeext) ] ; then \
|
|
|
|
|
|
rm -f $(mandir)/$(G77_CROSS_NAME)$(manext); \
|
|
|
|
|
|
$(INSTALL_DATA) $(srcdir)/f/g77.1 $(mandir)/$(G77_CROSS_NAME)$(manext); \
|
|
|
|
|
|
chmod a-x $(mandir)/$(G77_CROSS_NAME)$(manext); \
|
|
|
|
|
|
else \
|
|
|
|
|
|
rm -f $(mandir)/$(G77_INSTALL_NAME)$(manext); \
|
|
|
|
|
|
$(INSTALL_DATA) $(srcdir)/f/g77.1 $(mandir)/$(G77_INSTALL_NAME)$(manext); \
|
|
|
|
|
|
chmod a-x $(mandir)/$(G77_INSTALL_NAME)$(manext); \
|
|
|
|
|
|
fi; \
|
|
|
|
|
|
else true; fi
|
|
|
|
|
|
|
|
|
|
|
|
f77.uninstall:
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
1998-05-22 06:25:34 -04:00
|
|
|
|
@if [ -f lang-f77 ] ; then \
|
|
|
|
|
|
if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
|
|
|
|
|
|
echo " install-info --delete --info-dir=$(infodir) $(infodir)/g77.info"; \
|
|
|
|
|
|
install-info --delete --info-dir=$(infodir) $(infodir)/g77.info || : ; \
|
|
|
|
|
|
else : ; fi; \
|
|
|
|
|
|
else : ; fi
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-if [ -f lang-f77 ]; then \
|
|
|
|
|
|
rm -rf $(bindir)/$(G77_INSTALL_NAME)$(exeext); \
|
|
|
|
|
|
rm -rf $(bindir)/$(G77_CROSS_NAME)$(exeext); \
|
|
|
|
|
|
rm -rf $(mandir)/$(G77_INSTALL_NAME)$(manext); \
|
|
|
|
|
|
rm -rf $(mandir)/$(G77_CROSS_NAME)$(manext); \
|
|
|
|
|
|
rm -rf $(infodir)/g77.info*; \
|
1997-08-12 03:47:32 -04:00
|
|
|
|
fi
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Clean hooks:
|
|
|
|
|
|
# A lot of the ancillary files are deleted by the main makefile.
|
|
|
|
|
|
# We just have to delete files specific to us.
|
|
|
|
|
|
|
|
|
|
|
|
f77.mostlyclean:
|
|
|
|
|
|
-rm -f f/*$(objext)
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-rm -f f/fini f/stamp-str f/str-*.h f/str-*.j
|
|
|
|
|
|
-rm -f f/intdoc f/ansify f/intdoc.h0
|
1998-08-08 23:59:14 -04:00
|
|
|
|
-rm -f g77.aux g77.cps g77.ky g77.toc g77.vr g77.fn g77.kys \
|
|
|
|
|
|
g77.pg g77.tp g77.vrs g77.cp g77.fns g77.log g77.pgs g77.tps
|
1997-08-12 03:47:32 -04:00
|
|
|
|
f77.clean:
|
1998-05-18 07:18:41 -04:00
|
|
|
|
-rm -f g77.c g77.o g77spec.o g77version.o
|
1997-08-12 03:47:32 -04:00
|
|
|
|
f77.distclean:
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-rm -f lang-f77 f/Makefile
|
|
|
|
|
|
f77.extraclean:
|
|
|
|
|
|
f77.maintainer-clean:
|
1997-08-12 03:47:32 -04:00
|
|
|
|
-rm -f f/g77.info* f/g77.*aux f/TAGS f/BUGS f/INSTALL f/NEWS f/intdoc.texi
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Stage hooks:
|
|
|
|
|
|
# The main makefile has already created stage?/f.
|
|
|
|
|
|
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
G77STAGESTUFF = f/*$(objext) f/fini f/stamp-str f/str-*.h f/str-*.j \
|
1998-06-22 18:16:19 -04:00
|
|
|
|
lang-f77 g77.c g77.o g77spec.o g77version.o
|
1997-08-12 03:47:32 -04:00
|
|
|
|
|
1998-01-25 06:30:32 -05:00
|
|
|
|
f77.stage1: stage1-start
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-if [ -f lang-f77 ]; then \
|
1998-07-06 17:04:02 -04:00
|
|
|
|
mv -f $(G77STAGESTUFF) stage1/f; \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
fi
|
1998-01-25 06:30:32 -05:00
|
|
|
|
f77.stage2: stage2-start
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-if [ -f lang-f77 ]; then \
|
1998-07-06 17:04:02 -04:00
|
|
|
|
mv -f $(G77STAGESTUFF) stage2/f; \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
fi
|
1998-01-25 06:30:32 -05:00
|
|
|
|
f77.stage3: stage3-start
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-if [ -f lang-f77 ]; then \
|
1998-07-06 17:04:02 -04:00
|
|
|
|
mv -f $(G77STAGESTUFF) stage3/f; \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
fi
|
1998-01-25 06:30:32 -05:00
|
|
|
|
f77.stage4: stage4-start
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
-if [ -f lang-f77 ]; then \
|
1998-07-06 17:04:02 -04:00
|
|
|
|
mv -f $(G77STAGESTUFF) stage4/f; \
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
fi
|
1997-09-14 16:04:23 -04:00
|
|
|
|
#
|
1997-08-12 03:47:32 -04:00
|
|
|
|
# Maintenance hooks:
|
|
|
|
|
|
|
|
|
|
|
|
# This target creates the files that can be rebuilt, but go in the
|
|
|
|
|
|
# distribution anyway. It then copies the files to the distdir directory.
|
|
|
|
|
|
f77.distdir: f77.rebuilt
|
Restore circa-0.5.22 capabilities of `g77' driver:
Thu May 28 21:32:18 1998 Craig Burley <burley@gnu.org>
Restore circa-0.5.22 capabilities of `g77' driver:
* Make-lang.in (g77spec.o): Depend on f/version.h.
(g77version.o): New rule to compile g77 version info.
(g77$(exeext)): Depend on and link in g77version.o.
* g77spec.c: Rewrite to be more like 0.5.22 version
of g77.c, making filtering of command line smarter
so mixed Fortran and C (etc.) can be compiled, verbose
version info can be obtained, etc.
* lang-specs.h (f77-version): New "language" to support
"g77 -v" command under new gcc 2.8 regime.
* lex.c (ffelex_file_fixed): If -fnull-version, just
substitute a "source file" that prints out version info.
* top.c, top.h: Support -fnull-version.
* lang-specs.h: Use "%O" instead of OO macro to specify
object extension. Remove old stringizing cruft.
* Make-lang.in (g77.c, g77spec.o, g77.o, g77$(exeext),
g77-cross$(exeext), f771,
$(srcdir)/f/g77.info, $(srcdir)/f/g77.dvi,
$(srcdir)/f/intdoc.texi,
f77.install-common, f77.install-info, f77.install-man,
f77.uninstall, $(G77STAGESTUFF), f77.stage1, f77.stage2,
f77.stage3, f77.stage4, f77.distdir): Don't do anything
unless user specified "f77" or "F77" in $LANGUAGES either
during configuration or explicitly. For convenience of
various tests and to work around lack of the assignment
"LANGUAGES=$(BOOT_LANGUAGES)" in the "make stage1" command
of "make bootstrap" in gcc, use a touch file named "lang-f77"
to communicate whether this is the case.
* Make-lang.in (F77_FLAGS_TO_PASS): Delete this macro,
replace with minimal expansion of its former self in
each of the two instances where it was used.
* Makefile.in (HOST_CC): Delete this definition.
* com.c (index, rindex): Delete these declarations.
* proj.h: (isascii): Delete this.
* Make-lang.in (f77.install-common): Warn if `f77-install-ok'
flag-file exists, since it no longer triggers any activity.
Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
normalize and simplify g77/libg2c build process:
* Make-lang.in: Remove all support for overwriting
/usr/bin/f77 etc., or whatever the actual names are
via $(prefix) and $(local_prefix). (g++ overwrites
/usr/bin/c++, but then it's often the only C++ compiler
on the system; f77 often exists on systems that are
installing g77.)
(f77.realclean): Remove obsolete target.
(g77.c, g77$(exeext)): Minor changes to look more like g++'s
stuff.
(f771): Now built with srcdir=gcc/f, not srcdir=gcc, to be
more like g++ and such.
(f/Makefile): Removed, as g++ doesn't need this rule.
(f77.install-common): No longer install f77, etc.
(f77.install-man): No longer install f77.1.
(f77.uninstall): No longer uninstall f77, f77.1, etc.
(f77.stage1, f77.stage2, f77.stage3, f77.stage4): Do work
only if "f77" appears in $(LANGUAGES).
(Note: gcc's Makefile.in's bootstrap target should set
LANGUAGES=$(BOOT_LANGUAGES) when making the stage1 target.)
* Makefile.in: Update vis-a-vis gcc/cp/Makefile.in.
(none): Remove.
(g77-only): Relocate.
(all.indirect, f771, *.o): Now assumes current directory
is this dir (gcc/f), not the parent directory.
(TAGS): Remove "echo 'parse.y,0' >> TAGS ;" line.
* config-lang.in: Delete commented-out code.
Fix stagestuff definition. Add more stuff to
diff_excludes definition. Don't create any directories.
Set outputs to f/Makefile, to get variable substition
to happen (what does that really do, anyway?!).
* g77spec.c: Rename libf2c to libg2c.
* com.h: Remove all of the gcc back-end decls,
since egcs should have all of them correct.
* com.c: Include "proj.h" before anything else,
as that's how things are supposed to work.
* ste.c: Ditto.
* bad.c: Include "flags.j" here, since some diagnostics
check flag_pedantic_errors.
* Makefile.in (f/*.o): Rebuild dependencies via
deps-kinda.
* output.j: New source file.
* Make-lang.in (F77_SRCS): Update accordingly.
* Makefile.in (OUTPUT_H): Ditto.
(deps-kinda): Ditto.
* com.c: Include "output.j" here.
* lex.c: Ditto.
From-SVN: r20506
1998-06-15 03:37:33 -04:00
|
|
|
|
case "$(LANGUAGES)" in \
|
|
|
|
|
|
*[fF]77*) touch lang-f77;; \
|
|
|
|
|
|
*) rm -f lang-f77;; \
|
|
|
|
|
|
esac
|
|
|
|
|
|
-if [ -f lang-f77 ]; then \
|
|
|
|
|
|
mkdir tmp/f; \
|
|
|
|
|
|
cd f; \
|
|
|
|
|
|
for file in *[0-9a-zA-Z+]; do \
|
|
|
|
|
|
$(LN_S) $$file ../tmp/f; \
|
|
|
|
|
|
done; \
|
|
|
|
|
|
fi
|
