This patch changes a few more spots to use either cmd_sfunc_ftype or
cmd_cfunc_ftype, as appropriate. This is a bit cleaner.
Tested by rebuilding.
2014-07-01 Tom Tromey <tromey@redhat.com>
* breakpoint.c (add_catch_command): Use cmd_sfunc_ftype.
* breakpoint.h (add_catch_command): Use cmd_sfunc_ftype.
* cli/cli-decode.c (cmd_cfunc_eq, add_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, add_info, add_com): Use cmd_cfunc_ftype.
* command.h (cmd_cfunc_ftype): Move earlier.
(add_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, cmd_cfunc_eq)
(add_com, add_info): Use cmd_cfunc_ftype.
This is a trivial patch to make error_no_arg take a const argument.
2014-06-26 Tom Tromey <tromey@redhat.com>
* cli/cli-cmds.c (error_no_arg): Make "why" const.
* command.h (error_no_arg): Update.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): Change
parameter VAR's type from "unsigned int" to "int".
* command.h (var_zuinteger_unlimited): Update its comments.
(add_setshow_zuinteger_unlimited_cmd): Update the declaration.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
There are a bunch of aliases that get used with help, but the current
command completion logic does not include those when doing completions.
Since the framework is already mostly in place, extend complete_on_cmdlist
slightly to pass down the ignore_help_classes flag like is done with the
existing lookup command logic.
Now you can do:
(gdb) help use<tab>
and get back:
(gdb) help user-defined
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* cli/cli-decode.c (add_setshow_zuinteger_unlimited_cmd): New.
Update comment to add_setshow_integer_cmd.
* cli/cli-setshow.c (do_set_command): Handle case
'var_zuinteger_unlimited'.
(do_show_command): Likewise.
* cli/cli-cmds.c (init_cmds): Call add_setshow_zuinteger_unlimited_cmd
for command 'remotetimeout'.
* command.h (enum var_types): New zuinteger_unlimited. Update comment
to var_integer.
* source.c (_initialize_source): Call add_setshow_zuinteger_unlimited_cmd
for command 'set listsize'.
gdb/doc/
* gdb.texinfo (List): Describe the meaning of 0 and -1 in
'set listsize'.
gdb/testsuite/
* gdb.base/list.exp (set_listsize): Don't set arg to "unlimited"
when it is less than 0.
* breakpoint.h: Include command.h.
(add_catch_command): Use completer_ftype.
* cli/cli-decode.c (set_cmd_completer): Use completer_ftype.
* cli/cli-decode.h (struct cmd_list_element) <completer>:
Use completer_ftype.
* command.h (completer_ftype): New typedef.
(set_cmd_completer): Use it.
* python/py-cmd.c (struct cmdpy_completer) <completer>: Use
completer_ftype.
* command.h (enum command_class): New class 'no_set_class', for
"show" commands without a corresponding "set" command.
* value.c (_initialize_values): Use 'no_set_class' for "show values".
* copying.c (_initialize_copying): Ditto for "show copying" and
"show warranty".
* cli/cli-cmds.c (init_cli_cmds): Ditto for "show commands" and
"show version".
* cli/cli-setshow.c (cmd_show_list): Skip "show" commands for
which there is no corresponding "set" command (eg. "show copying").
* python/python.c (execute_gdb_command): Call
prevent_dont_repeat.
* top.c (suppress_dont_repeat): New global.
(dont_repeat): Use it.
(prevent_dont_repeat): New function.
* command.h (prevent_dont_repeat): Declare.
* target.h (struct target_ops): New methods to_get_bookmark
and to_goto_bookmark.
(target_get_bookmark): New macro.
(target_goto_bookmark): New macro.
* target.c (dummy_get_bookmark): New function, default implementation.
(dummy_goto_bookmark): New function, default implementation.
(update_current_target): Inherit new methods.
* record.c (record_get_bookmark): New function.
(record_goto_bookmark): New function.
(init_record_ops): Set to_get_bookmark and to_goto_bookmark methods.
* reverse.c (struct bookmark): New type.
(save_bookmark_command): New function (command).
(delete_bookmark_command): New function (command).
(goto_bookmark_command): New function (command).
(bookmarks_info): New function (command).
(_initialize_reverse): Add new bookmark commands.
* command.h (enum command_class): Add class_bookmark.
* NEWS: Mention bookmark commands.
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* cli/cli-decode.c (deprecated_add_set_cmd): Delete.
* command.h (deprecated_add_set_cmd): Delete declaration.
* gnu-nat.c (_initialize_gnu_nat): Replace 'maint gnu-debug' with
'set debug gnu-nat' and 'show debug gnu-nat'.
* i386-nat.c (_initialize_i386_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
* mips-linux-nat.c (_initialize_mips_linux_nat): Replace 'maint
show-debug-registers' with 'maint set show-debug-registers' and
'maint show show-debug-registers'.
gdb/doc/
2009-05-12 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo: Document 'set/show debug gnu-nat'. Replace 'maint
show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
show show-debug-regs' docs.
* cli/cli-decode.c (add_setshow_zuinteger_cmd): New.
* cli/cli-setshow.c (do_setshow_command): Handle it.
* command.h (enum var_types): Add var_zuinteger.
(add_setshow_zuinteger_cmd): Declare.
* valprint.c (_initialize_valprint): Change the set input-radix
and set output-radix commands to zuinteger type.
2009-01-23 Pedro Alves <pedro@codesourcery.com>
* gdb.base/radix.exp: Add tests to ensure that that set
input-radix 0 and set output-radix 0 are really rejected.
PR gdb/1815:
* cli/cli-decode.c (delete_cmd): Forward declare.
(delete_cmd): Now static. Change return type. Remove command
from alias chain. Rewrite.
(add_cmd): Initialize new fields. Update cmd_pointer on all
aliases.
(add_alias_cmd): Put command on alias chain.
* command.h (delete_cmd): Don't declare.
* cli/cli-decode.h (delete_cmd): Don't declare.
(struct cmd_list_element) <aliases, alias_chain>: New fields.
gdb/testsuite
* gdb.base/commands.exp (redefine_backtrace_test): New proc.
Call it.
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
Fix GDB PR cli/926.
* cli/cli-decode.c (add_setshow_uinteger_cmd): New function.
* command.h (add_setshow_uinteger_cmd): Declare.
* frame.c (set_backtrace_cmd): New function.
(show_backtrace_cmd): New function.
* frame.c (_initialize_frame): Replace "set/show
backtrace-below-main" with "set/show backtrace past-main". Add
command "set/show backtrace limit".
(backtrace_past_main): Rename "backtrace_below_main".
(backtrace_limit): New variable.
(get_prev_frame): Update. Check the backtrace_limit.
2003-08-09 Andrew Cagney <cagney@redhat.com>
* gdb.texinfo (Backtrace): Replace "set/show backtrace-below-main"
with "set/show backtrace past-main" and "set/show backtrace
limit".
Index: doc/gdb.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
retrieving revision 1.174
diff -u -r1.174 gdb.texinfo
--- doc/gdb.texinfo 8 Aug 2003 01:58:00 -0000 1.174
+++ doc/gdb.texinfo 9 Aug 2003 14:57:10 -0000
@@ -3922,27 +3922,40 @@
value, indicating that your program has stopped at the beginning of the
code for line @code{993} of @code{builtin.c}.
-@kindex set backtrace-below-main
-@kindex show backtrace-below-main
+@kindex set backtrace past-main
+@kindex show backtrace past-main
+@kindex set backtrace limit
+@kindex show backtrace limit
-Most programs have a standard entry point---a place where system libraries
-and startup code transition into user code. For C this is @code{main}.
-When @value{GDBN} finds the entry function in a backtrace it will terminate
-the backtrace, to avoid tracing into highly system-specific (and generally
-uninteresting) code. If you need to examine the startup code, then you can
-change this behavior.
+Most programs have a standard user entry point---a place where system
+libraries and startup code transition into user code. For C this is
+@code{main}. When @value{GDBN} finds the entry function in a backtrace
+it will terminate the backtrace, to avoid tracing into highly
+system-specific (and generally uninteresting) code.
+
+If you need to examine the startup code, or limit the number of levels
+in a backtrace, you can change this behavior:
@table @code
-@item set backtrace-below-main off
+@item set backtrace past-main
+@itemx set backtrace past-main on
+Backtraces will continue past the user entry point.
+
+@item set backtrace past-main off
Backtraces will stop when they encounter the user entry point. This is the
default.
-@item set backtrace-below-main
-@itemx set backtrace-below-main on
-Backtraces will continue past the user entry point to the top of the stack.
+@item show backtrace past-main
+Display the current user entry point backtrace policy.
+
+@item set backtrace limit @var{n}
+@itemx set backtrace limit 0
+@cindex backtrace limit
+Limit the backtrace to @var{n} levels. A value of zero means
+unlimited.
-@item show backtrace-below-main
-Display the current backtrace policy.
+@item show backtrace limit
+Display the current limit on backtrace levels.
@end table
@node Selection
* top.c (execute_command): Use cmd_func() and cmd_func_p().
* cli/cli-decode.c (cmd_func_p): New function.
(cmd_func): New function.
* command.h: Add cmd_func() and cmd_func_p().
(add_setshow_cmd_full): Declare.
* cli/cli-decode.c (add_setshow_cmd): No longer static. Now
returns void. Use add_setshow_cmd_full.
(add_setshow_cmd_full): New function.
(add_setshow_auto_boolean_cmd): Use add_setshow_cmd_full.
(add_setshow_boolean_cmd): Likewise.
(set_cmd_context, get_cmd_context): Declare.
* cli/cli-decode.h: Ditto.
* cli/cli-decode.c (get_cmd_context): New function.
(set_cmd_context): New function.
(add_cmd): Initialize context.
Part of fixing PR gdb/145 and PR gdb/146.
(execute_cmd_pre_hook): Declare.
* cli/cli-script.c (clear_hook_in_cleanup): New function.
(execute_cmd_post_hook, execute_cmd_pre_hook): New
functions. Execute pre/post hook while ensuring that afterwords
hook_in is cleared.
* top.c (execute_command): Use execute_cmd_post_hook, and
execute_cmd_pre_hook to execute pre/post commands.
* infrun.c (normal_stop): Pass stop_command and not pre_hook to
hook_stop_stub.
(hook_stop_stub): Call execute_cmd_pre_hook.
* cli/cli-decode.c: New file. Handle lists of commands, their decoding
and documentation.
(add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd,
add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc,
add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd,
add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list,
help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1,
undef_cmd_error, lookup_cmd, deprecated_cmd_warning,
lookup_cmd_composition, complete_on_cmdlist, complete_on_enum):
Moved here from command.c.
(add_info, add_info_alias, add_com, add_com_alias): Moved here from
top.c.
* cli/cli-decode.h: Definitions/declarations for the above.
* cli/cli-cmds.c: New file. GDB CLI commands.
(error_no_arg, info_command, show_command, help_command, show_version,
quit_command, pwd_command, cd_command, echo_command, shell_escape,
make_command, show_user, set_debug, show_debug, init_cmd_lists):
Moved here from top.c.
(apropos_command): Moved here from command.c.
(complete_command, source_command): Moved here (part) from top.c.
(is_complete_command): New function. Checks if a command is the
"complete" command.
(init_cli_cmds): New function. Add commands to the CLI (from code
previously in top.c.
* cli/cli-cmds.h: Definitions/declarations for the above.
* cli/cli-script.c: New file. GDB CLI command scripting.
(build_command_line, get_command_line, print_command_lines,
print_command_line, execute_user_command, execute_control_command,
while_command, if_command, arg_cleanup, setup_user_args, locate_arg,
insert_args, realloc_body_list, read_next_line,
recurse_read_control_structure, read_command_lines, free_command_lines,
do_free_command_lines_cleanup, make_cleanup_free_command_lines,
validate_comname, user_defined_command, define_command,
document_command, source_cleanup_lines, do_fclose_cleanup,
show_user_1): Moved here from top.c.
(script_from_file): New function. Implements execution of a script
contained in a file (part of code for the source_command() that used
to exist in top.c).
* cli/cli-script.h: Definitions/declarations for the above.
* cli/cli-setshow.c: New file. Handle set and show GDB CLI commands.
(parse_auto_binary_operation, parse_binary_operation,
do_setshow_command, cmd_show_list): Moved here from command.c.
* cli/cli-setshow.h: Definitions/declarations for the above.
* top.c: Remove all CLI code, except the command loop.
(gdb_init): Call init_cli_cmds().
* command.c: Remove obsolete file.
* command.h: Mark as DEPRECATED.
* gdbcmd.h: Ditto.
* call-cmds.h: Ditto.
* Makefile.in (SFILES): Remove command.c.
(COMMON_OBS): Remove command.o.
(command.o): Remove obsolete target.
(cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros.
Refer to CLI header files.
(cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets.
(SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS,
SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN,
SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli
subdirectory.
* configure.in (enable_gdbcli): New option. Include the CLI in the
executable (cannot be disabled yet).
(CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS,
CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add
the corresponding SUBDIR_CLI_* macros if CLI requested.
* configure: Regenerate.
From Steven Johnson <sbjohnson@ozemail.com.au>:
This set of changes add "hookpost-" as an expansion on the original
hooking of commands to GDB. A Hook may now be run "AFTER" execution of
a command as well as before.
* command.h (struct cmd_list_element): Changed elements hook and hookee
to hook_pre and hookee_pre respectively. Added hook_post and hookee_post
for the post hook command operation. Added hook_in so that an executing
hook can be flagged to prevent recursion.
* command.c (add_cmd): Changed initilization of cmd_list_element to
reflect above changes.
(delete_cmd): Remove both pre and post hooks.
(help_cmd): Notify that the command has pre and/or post hooks.
* infrun.c (normal_stop): Change references to hook_pre from hook.
* top.c (execute_command): Run both pre and post hooks.
(define_command): Allow definition of both pre and post hooks.
The definition of pre-hooks is done as before, with the "hook-"
prefix for backward compatibility.
From David Whedon <dwhedon@gordian.com>
* top.c (execute_command): Checks all commands beore executing
to see if the user needs to be warned that the command is
deprecated, warns user if appropriate.
(add_info), (add_info_alias), (add_com) , (add_com_alias): Changed
return values from void to struct cmd_list_element *.
* command.c (lookup_cmd_1): Check aliases before following link
in case user needs to be warned about a deprecated alias.
(deprecate_cmd): new exported function for command deprecation,
sets flags and posibly a replacement string.
(deprecated_cmd_warning): New exported funciton to warn user about
a deprecated command.
(lookup_cmd_composition): New exported function that determines
alias, prefix_command, and cmd based on a string. This is useful
is we want to full name of a command.
* command.h : Added prototypes for deprecate_cmd,
deprecated_warn_user and lookup_cmd_composition, added flags to
the cmd_list_element structure, changed return values for
add_com_* and add_info_* from void to cmd_list_element.
* maint.c : (maintenance_deprecate): New function to deprecate a
command. This exists only so that the testsuite can deprecate
commands at runtime and check the warning behavior.
(maintenance_undeprecate) : New function, drops deprecated flags.
(maintenance_do_deprecate): Actually does the (un)deprecation.
(initialize_maint_cmds): Added the above new deprecate commands.
