* ppc-opc.c: Formatting and comment fixes. Move insert and
extract functions earlier, deleting forward declarations.
(insert_nbi, insert_raq, insert_rbx): Expand use of RT_MASK and
RA_MASK.
This fixes "-M noaliases" disassembly for "c.nop", which is an alias for
"c.addi x0, 0".
opcodes/ChangeLog
2017-08-01 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-opc.c (riscv_opcodes): Mark "c.nop" as an alias.
According to ARMv8-A architecture manual, REG_SP is allowed in CRC32
instructions in Thumb mode. It is REG_PC that will cause unpredictable
behaviours on both ARM and Thumb.
This patch removes the incorrect warning on Thumb mode.
Meanwhile the disassembler is updated to use format "<bitfield>R" instead of
"<bitfield>S". "<bitfield>S" is not used elsewhere. so I have deleted related
code from the disassembler.
gas/
* config/tc-arm.c (do_crc32_1): Remove warning on REG_SP for thumb_mode.
* testsuite/gas/arm/crc32-armv8-a-bad.d: Update exepcted result.
* testsuite/gas/arm/crc32-armv8-r-bad.d: Likewise.
* testsuite/gas/arm/crc32-armv8-a.d: Likewise.
* testsuite/gas/arm/crc32-armv8-r.d: Likewise.
* testsuite/gas/arm/crc32-armv8-ar-bad.s: Update test case.
* testsuite/gas/arm/crc32-armv8-ar.s: Likewise.
* testsuite/gas/arm/crc32-bad.l: Update expected error message.
opcode/
* arm-dis.c (thumb32_opcodes): Use format 'R' instead of 'S' for
register operands in CRC instructions.
(print_insn_thumb32): Remove "<bitfield>S" support. Updated the
comments.
Fix build on x86:
opcodes/disassemble.c: In function ‘disassembler’:
opcodes/disassemble.c:113:52: error: unused parameter ‘big’ [-Werror=unused-parameter]
disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
^~~
opcodes/disassemble.c:113:71: error: unused parameter ‘mach’ [-Werror=unused-parameter]
disassembler (enum bfd_architecture a, bfd_boolean big, unsigned long mach,
^~~~
cc1: all warnings being treated as errors
* disassemble.c (disassembler): Mark big and mach with
ATTRIBUTE_UNUSED.
Fix `set architecture' and `set endian' command disassembly regressions
from commit 39503f8242 ("Delegate opcodes to select disassembler in
GDB"), and commit 003ca0fd22 ("Refactor disassembler selection"), as
well as a MIPS compressed ISA disassembly target regression from commit
6394c60699 ("Don't use print_insn_XXX in GDB"), which caused assertion
failures to trigger.
For example with the `mips-linux-gnu' target we get:
$ cat main.c
int
main (void)
{
return 0;
}
$ gcc -mips32r2 -O2 main.c -o main
$ gcc -mips16 -mips32r2 -O2 main.c -o main16
$ gdb
GNU gdb (GDB) 8.0.50.20170731-git
[...]
(gdb) file main
Reading symbols from main...done.
(gdb) show architecture
The target architecture is set automatically (currently mips:isa32r2)
(gdb) show endian
The target endianness is set automatically (currently big endian)
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:978: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->endian == (bfd_big_endian (exec_bfd) ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:976: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->arch == bfd_get_arch (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
Command aborted.
(gdb)
Remove the assertions then, restoring previous semantics:
(gdb) file main
Reading symbols from main...done.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: j 0x3800c
0x00400504 <+4>: addiu s0,t0,0
End of assembler dump.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: add %eax,%esp
0x00400502 <+2>: add %cl,(%eax)
0x00400504 <+4>: add %al,(%eax)
0x00400506 <+6>: adc %ah,0x0
End of assembler dump.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>: jr ra
0x00400503 <+2>: li v0,0
End of assembler dump.
(gdb)
gdb/
* arch-utils.c (default_print_insn): Remove arch/mach/endian
assertions.
opcodes/
* disassemble.c (disassembler): Remove arch/mach/endian
assertions.
The bit pattern comment in "aarch64_opcode_lookup_1" is reversed.
This patch fixed this.
opcode/
* aarch64-gen.c (print_decision_tree_1): Reverse the index of PATTERN to
correct the print.
* aarch64-dis-2.c: Regenerated.
With IBM z14 officially announced I can add z14 as CPU name.
No regressions with that patch on s390x.
gas/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Add z14 as alternate CPU
name.
* doc/as.texinfo: Add z14 to CPU string list.
* doc/c-s390.texi: Likewise.
opcodes/ChangeLog:
2017-07-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Enable z14 as CPU string in the opcode
table.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
When elf section size is beyond unsigned int max value, objdump fails
to disassemble from that section. Ex on PowerPC,
$ objdump -h /proc/kcore
Idx Name Size VMA
4 load2 100000000 c000000000000000
Here, size of load2 section is 0x100000000. Also note that, 0xc00....
address range is kernel space for PowerPC. Now let's try to disassemble
do_sys_open() using /proc/kcore.
$ cat /proc/kallsyms | grep -A1 -w do_sys_open
c00000000036c000 T do_sys_open
c00000000036c2d0 T SyS_open
Before patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: Address 0xc00000000036c000 is out of bounds.
Fix this by changing type of 'buffer_length' from unsigned int to
size_t. After patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: fc 00 4c 3c addis r2,r12,252
c00000000036c004: 00 53 42 38 addi r2,r2,21248
c00000000036c008: a6 02 08 7c mflr r0
include/
* dis-asm.h (struct disassemble_info): Change type of buffer_length
field to size_t.
opcodes/
* dis-buf.c (buffer_read_memory): Change type of end_addr_offset,
max_addr_offset and octets variables to size_t.
88c1242dc0 changed some generated files rather than the source.
* cgen-dis.in: Include disassemble.h, not dis-asm.h.
* m32c-dis.c: Regenerate.
* mep-dis.c: Regenerate.
The instructions are not documented in the Intel SDM but are documented
in the AMD APM as an alias to the group 2, ModRM.reg == 4 variant.
Both AMD and Intel CPUs execute the C[0-1] and D[0-3] instructions as
expected, i.e., like the /4 aliases:
#include <stdio.h>
int main(void)
{
int a = 2;
printf ("a before: %d\n", a);
asm volatile(".byte 0xd0,0xf0" /* SHL %al */
: "+a" (a));
printf("a after : %d\n", a);
return 0;
}
$ ./a.out
a before: 2
a after : 4
Correct an issue introduced with commit 7361da2c95 ("Add support for
MIPS R6.") and move the LSA and DLSA instructions back to the MSA ASE
instruction block in the regular MIPS opcode table. Adjust formatting
around the "MIPS r6" heading.
opcodes/
* mips-opc.c (mips_builtin_opcodes): Move "lsa" and "dlsa"
entries to the MSA ASE instruction block.
Add support for the base and Virtualization ASE microMIPS instructions
as per the architecture specifications[1][2][3][4].
Most of this change by Andrew Bennett.
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", p. 340
[2] "microMIPS32 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00848, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 133, 136
[3] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 415, 444
[4] "microMIPS64 Architecture for Programmers Volume IV-i:
Virtualization Module of the microMIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00849, Revision 1.06,
December 10, 2013, Section 6.1 "Overview", pp. 134-135, 139-140
binutils/
* NEWS: Mention microMIPS XPA support.
opcodes/
* micromips-opc.c (XPA, XPAVZ): New macros.
(micromips_opcodes): Add "mfhc0", "mfhgc0", "mthc0" and
"mthgc0".
gas/
* config/tc-mips.c (mips_ases): Add microMIPS XPA support.
* testsuite/gas/mips/micromips@xpa.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test. Enable
`xpa-virt-err' test for `micromips'.
Add base microMIPS Release 5 ISA support and the ERETNC instruction in
particular, as per the architecture specifications[1][2].
Most of this change by Andrew Bennett.
References:
[1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 266-267
[2] "MIPS Architecture for Programmers Volume II-B: The microMIPS64
Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit
Instructions", pp. 326-327
binutils/
* NEWS: Mention microMIPS Release 5 ISA support.
opcodes/
* micromips-opc.c (I36): New macro.
(micromips_opcodes): Add "eretnc".
gas/
* testsuite/gas/mips/micromips@r5.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Correct a commit 25499ac7ee ("MIPS16e2: Add MIPS16e2 ASE support")
disassembler bug with the handling of the ASE_MIPS16E2_MT combination
ASE flag, where the calculation uses MIPS ABI Flags directly rather than
calculated internal ASE flags. Consequently code does not correctly set
the ASE_MIPS16E2_MT flag when the MIPS16e2 ASE flag and the MT ASE flag
come from different sources, i.e. one from the BFD chosen and the other
one from MIPS ABI Flags.
Fix this by using internal ASE_MT and ASE_MIPS16E2 flags in a separate
subsequent step, factored out to a dedicated function for use with
future combination ASE flags. Adjust the `mips16e2@mips16e2-mt-sub.d'
test case accordingly, where the MT flag comes from the BFD selected for
the disassembler and the MIPS16e2 flag comes from the ELF binary itself.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): New function.
(mips_convert_abiflags_ases): Factor out ASE_MIPS16E2_MT
calculation to the new function.
(set_default_mips_dis_options): Call the new function.
gas/
* testsuite/gas/mips/mips16e2@mips16e2-mt-sub.d: Adjust for the
ASE_MIPS16E2_MT flag disassembler fix.
* testsuite/gas/mips/mips16e2-interaptiv-mr2@mips16e2-mt-sub.d:
Likewise.
This patch updates arc-dis.c:parse_disassembler_options to use a macro
FOR_EACH_DISASSEMBLER_OPTION, which has been introduced in [1], instead of a
homegrown solution to split option string.
[1] https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=65b48a81
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-dis.c (parse_disassembler_options): Use
FOR_EACH_DISASSEMBLER_OPTION.
There is a bug in handling of cpu=... disassembler option in case there are
other options after it, for example, `cpu=EM,dsp'. In this case `EM,dsp' is
treated as an option value, and strcasecmp reports is as non-equal to "EM".
This is fixed by using disassembler_options_cmp function, which compares string
treating `,' the same way as `\0'.
This function also solves a problem with option order in parse_option.
Previously, if several option had same prefix (e.g. fpud, fpuda), then the
longer one should have been compared first, otherwise when longer option is
passed it would be treated as a short one, because
CONST_STRNEQ ("fpud", "fpuda")
would be true. The order of options was correct for ARC, so there were no
bugs per se, but with disassembler_option_cmp there is no risk of such a bug
being introduced in the future.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* arc-dis.c (parse_option): Use disassembler_options_cmp to compare
disassembler option strings.
(parse_cpu_option): Likewise.
binutils/ChangeLog
yyyy-mm-dd Anton Kolesov <Anton.Kolesov@synopsys.com>
* testsuite/binutils-all/arc/double_store.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Tests for disassembler
options.
(do_objfile): New function.
(check_assembly): Likewise.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
2017-06-23 Andrew Waterman <andrew@sifive.com>
* riscv-opc.c (riscv_opcodes): Mark I-type SLT instruction as an
alias; do not mark SLTI instruction as an alias.
Update x86 assembler and disassembler for CET v2.0:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
1. incsspd and incsspq are changed to take a register opeand with a
different opcode.
2. setssbsy is changed to take no opeand with a different opcode.
gas/
* testsuite/gas/i386/cet-intel.d: Updated.
* testsuite/gas/i386/cet.d: Likewise.
* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
* testsuite/gas/i386/x86-64-cet.d: Likewise.
* testsuite/gas/i386/cet.s: Update incsspd and setssbsy tests.
* testsuite/gas/i386/x86-64-cet.s: Likewise.
opcodes/
* i386-dis.c (RM_0FAE_REG_5): Removed.
(PREFIX_MOD_3_0F01_REG_5_RM_1): Likewise.
(PREFIX_MOD_3_0F01_REG_5_RM_0): New.
(PREFIX_MOD_3_0FAE_REG_5): Likewise.
(prefix_table): Remove PREFIX_MOD_3_0F01_REG_5_RM_1. Add
PREFIX_MOD_3_0F01_REG_5_RM_0.
(prefix_table): Update PREFIX_MOD_0_0FAE_REG_5. Add
PREFIX_MOD_3_0FAE_REG_5.
(mod_table): Update MOD_0FAE_REG_5.
(rm_table): Update RM_0F01_REG_5. Remove RM_0FAE_REG_5.
* i386-opc.tbl: Update incsspd, incsspq and setssbsy.
* i386-tbl.h: Regenerated.
Since there are only 4 bnd registers, return "(bad)" for register
number > 3.
PR binutils/21594
* i386-dis.c (OP_E_register): Check valid bnd register.
(OP_G): Likewise.
PR binutils/21588
* rl78-decode.opc (OP_BUF_LEN): Define.
(GETBYTE): Check for the index exceeding OP_BUF_LEN.
(rl78_decode_opcode): Use OP_BUF_LEN as the length of the op_buf
array.
* rl78-decode.c: Regenerate.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
PR binutils/21587
* rx-decode.opc: Include libiberty.h
(GET_SCALE): New macro - validates access to SCALE array.
(GET_PSCALE): New macro - validates access to PSCALE array.
(DIs, SIs, S2Is, rx_disp): Use new macros.
* rx-decode.c: Regenerate.
Currently print_insn_arc relies on BFD mach and ELF private headers to
distinguish between various ARC architectures. Sometimes those values are not
correct or available, mainly in the case of debugging targets without and ELF
file available. Changing a BFD mach is not a problem for the debugger, because
this is a generic BFD field, and GDB, for example, already sets it according to
information provided in XML target description or specified via GDB 'set arch'
command. However, things are more complicated for ELF private headers, since
it requires existing of an actual ELF file. To workaround this problem this
patch allows CPU model to be specified via disassemble info options. If CPU is
specified in options, then it will take a higher precedence than whatever might
be specified in ELF file.
This is mostly needed for ARC EM and ARC HS, because they have the same
"architecture" (mach) ARCv2 and differ in their private ELF headers. Other ARC
architectures can be distinguished between each other purely via "mach" field.
Proposed disassemble option format is "cpu=<CPU>", where CPU can be any valid
ARC CPU name as supported by GAS. Note that this creates a seeming redundancy
with objdump -m/--architecture option, however -mEM and -mHS still result in
"ARCv2" architecture internally, while -Mcpu={HS,EM} would have an actual
effect on disassembler.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (enforced_isa_mask): Declare.
(cpu_types): Likewise.
(parse_cpu_option): New function.
(parse_disassembler_options): Use it.
(print_insn_arc): Use enforced_isa_mask.
(print_arc_disassembler_options): Document new options.
binutils/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* doc/binutils.texi: Document new cpu=... disassembler options for ARC.
This patch changes rl78 to let disassble.c:disassembler select
disassembler. rl78_get_disassembler doesn't handle the case
that abfd is NULL, so this patch also fix it.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-tdep.c (rl78_gdbarch_init): Don't call
set_gdbarch_print_insn.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c (rl78_get_disassembler): If parameter abfd
is NULL, set cpu to E_FLAG_RL78_ANY_CPU.
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
The `sel' operand of CP0 move instructions is a part of the base ISA and
has nothing to do with the MT ASE.
opcodes/
* mips-dis.c (print_insn_args) <default>: Remove an MT ASE
reference in CP0 move operand decoding.
Disassemble the MIPS16 BREAK and SDBBP instruction's immediate operand
in the hexadecimal rather than decimal numeral system and add respective
operandless variants with an implicit 0 operand, making our handling of
these instructions consistent with how we have processed their regular
MIPS and microMIPS counterparts since forever.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'6'>: Switch the operand
type to hexadecimal.
(mips16_opcodes): Add operandless "break" and "sdbbp" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Adjust BREAK
and SDBBP disassembly.
gas/
* testsuite/gas/mips/mips16.d: Adjust BREAK disassembly.
* testsuite/gas/mips/mips16-64@mips16.d: Likewise.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-64@mips16-macro.d: Likewise.
* testsuite/gas/mips/mips16-sub.d: Likewise.
* testsuite/gas/mips/mips16-32@mips16-sub.d: Likewise.
Following the way how descriptive SYNC mnemonics have been defined in
the architecture[1][2] mark them as aliases, so that the generic SYNC
instruction can be alternatively disassembled along with its immediate
operand, as noted in the documents referred.
References:
[1] "MIPS Architecture For Programmers, Volume II-A: The MIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00086,
Revision 5.04, December 11, 2013, Table 4.7 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 305
[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
Revision 5.04, January 15, 2014, Table 5.28 "Encodings of the
Bits[10:6] of the SYNC instruction; the SType Field", p. 481
opcodes/
* mips-opc.c (mips_builtin_opcodes): Mark "synciobdma", "syncs",
"syncw", "syncws", "sync_acquire", "sync_mb", "sync_release",
"sync_rmb" and "sync_wmb" as aliases.
* micromips-opc.c (micromips_opcodes): Mark "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" as aliases.
gas/
* testsuite/gas/mips/mips32r2-sync-1.d: New test.
* testsuite/gas/mips/micromips@mips32r2-sync-1.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
e.g.
1: auipc ra, %pcrel_hi(symbol)
jalr ra, %pcrel_lo(1b)(ra)
The use of ra instead of t1 for address construction provides an
opportunity for a microarchitecture to elide the write of the
destination address, and instead read the target address as an
immediate spread across the fused auipc+jalr pair. The link
register ra in the jalr overwrites the target address temporary.
2017-05-01 Michael Clark <michaeljclark@mac.com>
* riscv-opc.c (riscv_opcodes) <call>: Use RA not T1 as a temporary
register.
Correct the disassembly of the PC-relative immediate argument of the
MIPS16 synthetic LA, LW, DLA and LD instructions and do not mask the
LSB, which in this case is a part of the data address rather than the
ISA bit and has to be fully presented.
opcodes/
* mips-dis.c (print_insn_arg): Only clear the ISA bit for jumps
and branches and not synthetic data instructions.
binutils/
* testsuite/binutils-all/mips/mips16-undecoded.d: Adjust the
disassembly of PC-relative LA and LW synthetic instructions.
enter/leave mnemonics are enhanced to not only accept register ranges
but also single register (i.e., r13) or even no GPR register at all.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/leave_enter.d: Update test.
* testsuite/gas/arc/leave_enter.s: Likewise.
opcodes/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (print_insn_arc): Smartly print enter/leave mnemonics.
* arc-opc.c (insert_r13el): New function.
(R13_EL): Define.
* arc-tbl.h: Add new enter/leave variants.
NOP and MOV 0,0 are having the same encoding. As MOV mnemonic is
located before NOP in the instruction table, the disassembler prints
MOV 0,0 for NOP. Reorder the instructions such that NOP is first.
gas/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/b.d: Update test.
* testsuite/gas/arc/noargs_hs.d: Likewise.
opcode/
2017-04-25 Claudiu Zissulescu <claziss@synopsys.com>
* arc-tbl.h: Reorder NOP entry to be before MOV instructions.
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and add a
help text for the `-M no-aliases' disassembler option.
opcodes/
* mips-dis.c (print_mips_disassembler_options): Add
`no-aliases'.
Complement commit 986e18a5a9 ("Add a second 'pinfo' member to
mips_opcode to extend number of available bits"),
<https://sourceware.org/ml/binutils/2005-01/msg00261.html>, and annotate
MIPS16 NOP, LA, DLA and the synthetic forms of LD and LW instructions as
aliases. These correspond to MOVE, and the PC-relative ADDIU, DADDIU,
LD and LW hardware instructions respectively.
binutils/
* testsuite/binutils-all/mips/mips16-alias.d: New test.
* testsuite/binutils-all/mips/mips16-noalias.d: New test.
* testsuite/binutils-all/mips/mips16-alias.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
opcodes/
* mips16-opc.c (AL): New macro.
(mips16_opcodes): Mark "nop", "la", "dla", and synthetic forms
of "ld" and "lw" as aliases.
This prevents the disassembler to show `return' instructions as
`rett' in V9 and later architectures.
opcodes/ChangeLog:
2017-04-21 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (sparc_opcodes): Mark RETT instructions as v6notv9.
PR binutils/21380
opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix masks for LD1R, LD2R,
LD3R and LD4R.
gas * testsuite/gas/aarch64/illegal-3.s: New file.
* testsuite/gas/aarch64/illegal-3.d: New file.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
PPC_OPCODE_440 being set for ppc476 meant that many opcodes needed to
be deprecated for ppc476. There are far fewer to add specially for
ppc476 if PPC_OPCODE_440 is not set for ppc476.
* ppc-dis.c (ppc_opts <476>): Remove PPC_OPCODE_440.
* ppc-opc.c (MULHW): Add PPC_OPCODE_476.
(powerpc_opcodes): Adjust PPC440, PPC464 and PPC476 insns to suit
removal of PPC_OPCODE_440 from ppc476 cpu selection bits.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
PR 21303
opcodes/
* ppc-dis.c (struct ppc_mopt): Comment.
(ppc_opts <e200z4>): Move PPC_OPCODE_VLE from .sticky to .cpu.
gas/
* testsuite/gas/ppc/pr21303.d,
* testsuite/gas/ppc/pr21303.s: New test
* testsuite/gas/ppc/ppc.exp: Run it.
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
PR 21248
* ppc-opc.c (powerpc_opcodes): Enable mfivor32, mfivor33,
mtivor32, and mtivor33 for e6500. Move mfibatl and mfibatu after
those spr mnemonics they alias. Similarly for mtibatl, mtibatu.
- They can accept 0 in imm field
2017-03-14 Kito Cheng <kito.cheng@gmail.com>
* riscv-opc.c (riscv_opcodes> <c.li>: Use the 'o' immediate encoding.
<c.andi>: Likewise.
<c.addiw> Likewise.
Many x86 instructions have more than one encodings. Assembler picks
the default one, usually the shortest one. Although the ".s", ".d8"
and ".d32" suffixes can be used to swap register operands or specify
displacement size, they aren't very flexible. This patch adds pseudo
prefixes, {xxx}, to control instruction encoding. The available
pseudo prefixes are {disp8}, {disp32}, {load}, {store}, {vex2}, {vex3}
and {evex}. Pseudo prefixes are preferred over the ".s", ".d8" and
".d32" suffixes, which are deprecated.
gas/
* config/tc-i386.c (_i386_insn): Add dir_encoding and
vec_encoding. Remove swap_operand and need_vrex.
(extra_symbol_chars): Add '}'.
(md_begin): Mark '}' with LEX_BEGIN_NAME. Allow '}' in
mnemonic.
(build_vex_prefix): Don't use 2-byte VEX encoding with
{vex3}. Check dir_encoding and load.
(parse_insn): Check pseudo prefixes. Set dir_encoding.
(VEX_check_operands): Likewise.
(match_template): Check dir_encoding and load.
(parse_real_register): Set vec_encoding instead of need_vrex.
(parse_register): Likewise.
* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
{vex2}, {vex3} and {evex}. Remove ".s", ".d8" and ".d32"
* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
* testsuite/gas/i386/pseudos.d: New file.
* testsuite/gas/i386/pseudos.s: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.s: Likewise.
opcodes/
* i386-gen.c (opcode_modifiers): Replace S with Load.
* i386-opc.h (S): Removed.
(Load): New.
(i386_opcode_modifier): Replace s with load.
* i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3}
and {evex}. Replace S with Load.
* i386-tbl.h: Regenerated.
Currently, the -maltivec and -mvsx GAS options enable *all* of the altivec
and vsx instructions respecitively that have ever been added. This is in
constract to GCC's -maltivec and -mvsx options, which only enable the oldest
(ie, first) set of altivec and vsx instructions. This patch changes GAS to
mimic GCC's behaviour with respect to -maltivec and -mvsx and it solves a
problem with trying to assemble the lxvx instruction which is different
between POWER8 and POWER9.
opcodes/
* ppc-dis.c (ppc_opts) <altivec>: Do not use PPC_OPCODE_ALTIVEC2;
<vsx>: Do not use PPC_OPCODE_VSX3;
gas/
* testsuite/gas/ppc/altivec2.d (as): Use the -mpower8 option.
(objdump): Use the -Mpower8 option.
Certain insns have restrictions on fields. For example, the insn
mentioned in the PR, lqarx, must specify an even general purpose
register as its destination and that register cannot appear in
either of the base or index reg fields. This holds even when the RA0
field is 0 (meaning a zero rather than r0).
PR 21124
* ppc-opc.c (extract_esync, extract_ls, extract_ral, extract_ram)
(extract_raq, extract_ras, extract_rbx): New functions.
(powerpc_operands): Use opposite corresponding insert function.
(Q_MASK): Define.
(powerpc_opcodes): Apply Q_MASK to all quad insns with even
register restriction.
