All the usages of find_inferior were removed, so the function itself can
be removed.
gdb/gdbserver/ChangeLog:
* inferiors.h (find_inferior): Remove.
* inferiors.c (find_inferior): Remove.
These functions were modified in the previous patch series, but I forgot
to update some comments.
gdb/gdbserver/ChangeLog:
* linux-low.c (resume_status_pending_p): Update comment.
(need_step_over_p): Update comment.
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_resume_one_thread): Return void, take
parameter directly.
(linux_resume): Use for_each_thread.
Replace with find_thread/for_each_thread. I inlined the callbacks,
because they are relatively simple.
gdb/gdbserver/ChangeLog:
* linux-low.c (select_singlestep_lwp_callback): Remove.
(count_events_callback): Remove.
(select_event_lwp_callback): Remove.
(select_event_lwp): Use find_thread/for_each_thread.
Replace with find_thread. Writing a lambda inline in directly in the if
conditions would be a bit messy, so I chose to assign them to variables
instead.
gdb/gdbserver/ChangeLog:
* linux-low.c (not_stopped_callback): Return bool, take filter
argument directly.
(linux_wait_for_event_filtered): Use find_thread.
(linux_wait_1): Likewise.
Replace with find_thread. We could almost use find_thread_ptid, except
that find_lwp_pid uses the pid of the input ptid of the lwp is 0, so the
behavior is not quite the same.
gdb/gdbserver/ChangeLog:
* linux-low.c (same_lwp): Remove.
(find_lwp_pid): Use find_thread.
Replace with for_each_thread with pid filtering. The callback becomes
trivial enough that it's better to inline it.
gdb/gdbserver/ChangeLog:
* linux-low.c (delete_lwp_callback): Remove.
(linux_mourn): Use for_each_thread.
Replace it with find_thread. I also modified the code a bit to use a
lambda and a boolean.
gdb/gdbserver/ChangeLog:
* linux-low.c (struct counter): Remove.
(second_thread_of_pid_p): Remove.
(last_thread_of_process_p): Use find_thread.
Replace with for_each_thread with pid filtering. This allows
simplifying the callback a little bit.
gdb/gdbserver/ChangeLog:
* linux-mips-low.c (update_watch_registers_callback): Return
void, remove pid_p parameter, don't check for pid.
(mips_insert_point, mips_remove_point): Use for_each_thread.
Replace it with for_each_thread with pid filtering. We can remove
lynx_delete_thread_callback and pass remove_thread directly.
I can't build/test this change, but it should be obvious enough.
gdb/gdbserver/ChangeLog:
* lynx.low (lynx_delete_thread_callback): Remove.
(lynx_mourn): Use for_each_thread.
Replace with for_each_thread with pid filtering.
regcache_invalidate_one is not longer needed, as it was only used to
filter the pid. We can call regcache_invalidate_thread directly.
gdb/gdbserver/ChangeLog:
* regcache.c (regcache_invalidate_one): Remove.
(regcache_invalidate_pid): use for_each_thread.
This changes maybe_disable_address_space_randomization to be an RAII
class, rather than having it return a cleanup.
Regression tested by the buildbot.
ChangeLog
2017-11-26 Tom Tromey <tom@tromey.com>
* nat/linux-personality.h (class
maybe_disable_address_space_randomization): New class.
(maybe_disable_address_space_randomization): Don't declare
function.
* nat/linux-personality.c (restore_personality)
(make_disable_asr_cleanup): Remove.
(maybe_disable_address_space_randomization): Now a constructor.
(~maybe_disable_address_space_randomization): New destructor.
* linux-nat.c (linux_nat_create_inferior): Update.
gdbserver/ChangeLog
2017-11-26 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_create_inferior): Update.
This patch changes tic6x target descriptions to be more flexible. Rebuild
tic6x-uclinux GDBserver with my x86 g++, and the unit test passes.
gdb:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* arch/tic6x.c: New file.
* arch/tic6x.h: New file.
* features/Makefile (FEATURE_XMLFILES): Add tic6x-c6xp.xml,
tic6x-core.xml and tic6x-gp.xml.
* features/tic6x-c6xp.c: Generated.
* features/tic6x-core.c: Generated.
* features/tic6x-gp.c: Generated.
* target-descriptions.c (maint_print_c_tdesc_cmd): Match
"tic6x-".
gdb/gdbserver:
2017-11-24 Yao Qi <yao.qi@linaro.org>
* configure.srv: Set $srv_regobj for tic6x-linux.
* linux-tic6x-low.c: Include "arch/tic6x.h" and "tdesc.h".
(tic6x_read_description): Move some code to tic6x_arch_setup.
(tic6x_tdesc_test): New function.
(initialize_low_arch): Call selftests::register_test.
Recent gcc 8 trunk emits the warning below,
../../../binutils-gdb/gdb/gdbserver/remote-utils.c:1204:14: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying 6 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy (buf, "watch:", 6);
~~~~~~~~^~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1118:15: error: ‘char* strncpy(char*, const char*, size_t)’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy (cmdtype1 + 1, cmdtype, len - 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1110:16: note: length computed here
len = strlen (cmdtype);
~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1120:15: error: ‘char* strncpy(char*, const char*, size_t)’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
strncpy (cmdtype2, cmdtype, len - 1);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../binutils-gdb/gdb/cli/cli-decode.c:1110:16: note: length computed here
len = strlen (cmdtype);
~~~~~~~^~~~~~~~~
../../binutils-gdb/gdb/cp-namespace.c:1071:11: error: ‘char* strncpy(char*, const char*, size_t)’ output truncated before terminating nul copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy (full_name + scope_length, "::", 2);
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This patch fixes it by using memcpy instead of strncpy.
gdb:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* cli/cli-decode.c (help_list): Use memcpy instead of strncpy.
* cp-namespace.c (cp_lookup_transparent_type_loop): Likewise.
gdb/gdbserver:
2017-11-22 Yao Qi <yao.qi@linaro.org>
* remote-utils.c (prepare_resume_reply): Use memcpy.
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (kill_one_lwp_callback): Return void, take
argument directly, don't filter on pid.
(linux_kill): Use for_each_thread.
Replace with find_thread. Instead of setting the flag in the callback,
make the callback return true/false, and check the result against NULL
in the caller.
gdb/gdbserver/ChangeLog:
* linux-low.c (resume_status_pending_p): Return bool, remove
flag_p argument.
(linux_resume): Use find_thread.
Replace it with for_each_thread.
gdb/gdbserver/ChangeLog:
* linux-low.c (struct thread_resume_array): Remove.
(linux_set_resume_request): Return void, take arguments
directly.
(linux_resume): Use for_each_thread.
Replace with for_each_thread. I inlined unsuspend_one_lwp in
unsuspend_all_lwps, since it is very simple.
gdb/gdbserver/ChangeLog:
* linux-low.c (unsuspend_one_lwp): Remove.
(unsuspend_all_lwps): Use for_each_thread, inline code from
unsuspend_one_lwp.
Replace find_inferior with find_thread. Since it may be useful in the
future, I added another overload to find_thread which filters based on a
ptid (using ptid_t::matches), so now iterate_over_lwps doesn't have to
do the filtering itself. iterate_over_lwps_filter is removed and
inlined into iterate_over_lwps.
gdb/gdbserver/ChangeLog:
* gdbthread.h (find_thread): Add overload with ptid_t filter.
* linux-low.c (struct iterate_over_lwps_args): Remove.
(iterate_over_lwps_filter): Remove.
(iterate_over_lwps): Use find_thread.
Replace with for_each_thread, and inline code from
reset_lwp_ptrace_options_callback.
gdb/gdbserver/ChangeLog:
* linux-low.c (reset_lwp_ptrace_options_callback): Remove.
(linux_handle_new_gdb_connection): Use for_each_thread, inline
code from reset_lwp_ptrace_options_callback.
Replace two usages with the overload of for_each_thread that filters on
pid. It allows to simplify the callback a little bit.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (struct update_registers_data): Remove.
(update_registers_callback): Return void, take arguments
directly, don't check thread's pid.
(arm_insert_point, arm_remove_point): Use for_each_thread.
Replace with for_each_thread.
gdb/gdbserver/ChangeLog:
* win32-low.c (continue_one_thread): Return void, take argument
directly.
(child_continue): Use for_each_thread.
Straightforward replacement of find_inferior with the overload of
for_each_thread that filters on pid. I am able to build-test this
patch, but not run it.
gdb/gdbserver/ChangeLog:
* win32-i386-low.c (update_debug_registers_callback): Rename
to ...
(update_debug_registers): ... this, return void, remove pid_p arg.
(x86_dr_low_set_addr, x86_dr_low_set_control): Use for_each_thread.
This patch makes the syscalls_to_catch field of process_info an
std::vector<int>. The process_info structure must now be
newed/deleted.
In handle_extended_wait, the code that handles exec events destroys the
existing process_info and creates a new one. It moves the content of
syscalls_to_catch from the old to the new vector. I used std::move for
that (through an intermediary variable), which should have the same
behavior as the old code.
gdb/gdbserver/ChangeLog:
* inferiors.h (struct process_info): Add constructor, initialize
fields..
<syscalls_to_catch>: Change type to std::vector<int>.
* inferiors.c (add_process): Allocate process_info with new.
(remove_process): Free process_info with delete.
* linux-low.c (handle_extended_wait): Adjust.
(gdb_catching_syscalls_p, gdb_catch_this_syscall_p): Adjust.
* server.c (handle_general_set): Adjust.
This fixes the issue reported by Dmitry Antipov <dantipov@nvidia.com>
here:
https://sourceware.org/ml/gdb/2017-10/msg00048.html
The problem is that GDBserver stops listening to Ctrl-C/interrupt
requests if you disconnect and reconnect back.
Dmitry wrote:
~~~
Currently gdbserver installs SIGIO handler just once, in
initialize_async_io() called from captured_main(), and this handler is
removed when remote_desc is closed in remote_close(). Next, when a
new instance of remote_desc is fetched from accept() and has '\003'
arrived, input_interrupt() is never called because it is not
registered as SIGIO handler.
~~~
The fix here is not remove the SIGIO handler in the first place, thus
going back to the original before-first-connection state.
(I haven't gone back to try it, but I think this was a regression
caused by commit 8b20733984 ("[GDBserver] Block and unblock SIGIO"),
which was what made remote_close remove the signal handler.)
New test included.
gdb/gdbserver/ChangeLog:
2017-11-16 Pedro Alves <palves@redhat.com>
* remote-utils.c (remote_close): Block SIGIO signals instead of
uninstalling the SIGIO handler.
gdb/testsuite/ChangeLog:
2017-11-16 Pedro Alves <palves@redhat.com>
* gdb.server/reconnect-ctrl-c.c: New file.
* gdb.server/reconnect-ctrl-c.exp: New file.
I can't find a c6x-uclinux c++ compiler, so I use my host g++ to build
tic6x-uclinux GDBserver, and find the following build failures. They are
not target specific, so I believe they are real errors. This patch fixes
them.
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c:313:34: error: invalid
conversion from 'void*' to 'tic6x_register*' [-fpermissive]
union tic6x_register *regset = buf;
^
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c: In function 'void tic6x_store_gregset(regcache*, const void*)':
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c:324:40: error: invalid
conversion from 'const void*' to 'const tic6x_register*' [-fpermissive]
const union tic6x_register *regset = buf;
^
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c: At global scope:
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c:359:28: error: redefinition of 'usrregs_info tic6x_usrregs_info'
static struct usrregs_info tic6x_usrregs_info =
^
../binutils-gdb/gdb/gdbserver/linux-tic6x-low.c:186:28: note: 'usrregs_info tic6x_usrregs_info' previously declared here
static struct usrregs_info tic6x_usrregs_info;
^
gdb/gdbserver:
2017-11-16 Yao Qi <yao.qi@linaro.org>
* linux-tic6x-low.c (tic6x_fill_gregset): Cast buf.
(tic6x_store_gregset): Likewise.
(tic6x_usrregs_info): Move it up.
common/common.m4 still had checks for termio.h/sgtty.h that are stale
now. Remove them.
gdb/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* common/common.m4 (GDB_AC_COMMON): No longer check termio.h nor
sgtty.h.
* config.in, configure: Regenerate.
gdb/gdbserver/ChangeLog:
2017-11-06 Pedro Alves <palves@redhat.com>
* config.in, configure: Regenerate.
Replace it with for_each_thread. While at it, we can inline the
callback code. One little change is that I am using the
prev_general_thread variable instead of current_gen_ptid, since they
should have the same value.
gdb/gdbserver/ChangeLog:
* target.c (struct thread_search): Remove.
(thread_search_callback): Remove.
(prepare_to_access_memory): Use for_each_thread instead of
find_inferior. Inline code from thread_search_callback.
Change find_inferior with find_thread. Since we can now pass arguments
directly instead of through a void pointer, we don't need the
visit_actioned_threads_data structure anymore.
gdb/gdbserver/ChangeLog:
* server.c (struct visit_actioned_threads_data): Remove.
(visit_actioned_threads): Change prototype to take arguments
directly.
(resume): Use find_thread instead of find_inferior.
Replace one with find_thread, the other with for_each_thread.
gdb/gdbserver/ChangeLog:
* server.c (queue_stop_reply_callback): Change prototype, return
void.
(find_status_pending_thread_callback): Remove.
(handle_status): Replace find_inferior with find_thread and
for_each_thread.
It happens often that we want to iterate or find threads restricted to a
given pid. I think it's worth having an overload to help with this.
Right now there is a single user of each of the find_thread and
for_each_thread overload, but as we replace the usages of find_inferior
with for_each_thread/find_thread, more usages will pop up.
gdb/gdbserver/ChangeLog:
* gdbthread.h (find_thread, for_each_thread): New functions.
* inferiors.c (thread_of_pid): Remove.
(find_any_thread_of_pid): Use find_thread.
* linux-low.c (num_lwps): Use for_each_thread.
