2013-08-19 Tristan Gingold <gingold@adacore.com>
* nm.c (print_size_symbols): Directly get symbol size.
binutils/testsuite/
2013-08-19 Tristan Gingold <gingold@adacore.com>
* binutils-all/nm.exp: Add a test for nm --size-sort
* binutils-all/nm-elf-1.s: New file.
* binutils-all/nm-1.s: New file.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
* binutils-all/readelf.n: Updare expected output from readelf.
* readelf.c (process_corefile_note_segment): Prevent attempts to
read beyond the end of the note buffer.
* mips-dis.c (is_compressed_mode_p): Only match symbols from the
section disassembled.
binutils/testsuite/
* binutils-all/mips/mixed-micromips.d: New test.
* binutils-all/mips/mixed-mips16.d: New test.
* binutils-all/mips/mixed-micromips.s: New test source.
* binutils-all/mips/mixed-mips16.s: New test source.
* binutils-all/mips/mips.exp: New file.
* lib/binutils-common.exp (is_zlib_supported): New function.
* lib/utils-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/compress.exp: Bail out if zlib is not available.
* binutils-all/objdump.exp (objdump compressed debug):
Mark unsupported if zlib is not available.
* binutils-all/readelf.exp (readelf_compressed_wa_test): Likewise.
gas/testsuite/
* lib/gas-defs.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
ld/testsuite/
* ld-elf/compress.exp: Bail out if zlib is not supported.
* lib/ld-lib.exp (run_dump_test): If as options include
--compress-debug-sections and zlib is not available, report
the test as unsupported.
* binutils-all/ar.exp (long_filenames): Remove extra verbose
before binutils_run.
(thin_archive): Likewise.
(thin_archive_with_nested): Likewise. Also run bfdtest1 on
$archive2.
to PUSH/POP {reg}.
* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.
* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer. Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.
* readelf.c (process_corefile_note_segment): Fix off-by-one errors
verifying the contents of a note.
* binutils-all/version.s: New test source file.
* binutils-all/readelf.n: New file: expected readelf output.
* binutils-all/readelf.exp: Add test of .note section contents.
(objdump -WL): Skip this test on MCore, Moxie and OpenRisc
targets.
* binutils-all/objcopy.exp (localize-hidden-1): Expect this test
to fail on MIPS based targets.
Fix a syntax error bug when compiling rc files with the VERSIONINFO resource
containing more than one language block inside a single StringFileInfo block.
* windint.h (rc_ver_stringtable): New structure definition.
(rc_ver_info): Use it.
* rcparse.y (verstringtable): New variable.
(verstringtables): New type.
(verstringtables:): New rule declaration.
(verblocks:): Use it.
* resrc.c (append_ver_stringtable): New function.
(append_ver_stringfileinfo): Update to use stringtables.
* windres.h (append_ver_stringfileinfo): Update declaration.
(append_ver_stringtable): New declaration.
* resrc.c (write_rc_versioninfo): Update to support multiple blocks.
* resbin.c (bin_to_res_version): Likewise.
(res_to_bin_versioninfo): Likewise.
* binutils-all\windres\version.rsd: Regenerate.
* binutils-all\windres\version_cat.rsd: Regenerate.
* binutils-all\windres\version_mlang.rc: Add new test.
* binutils-all\windres\version_mlang.rsd: Likewise.
2011-10-04 Paul Woegerer <paul_woegerer@mentor.com>
Carlos O'Donell <carlos@codesourcery.com>
* dwarf.c (display_debug_lines_decoded): Index directory_table with
directory_index from file_table entry.
binutils/testsuite/
2011-10-04 Carlos O'Donell <carlos@codesourcery.com>
* binutils-all/dw2-decodedline.S: New file.
* binutils-all/objdump.WL: New file.
* binutils-all/objdump.exp: Update copyright year.
New test case for -WL.
binutils/
2011-09-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13180
* objcopy.c (is_strip_section_1): New.
(is_strip_section): Use it. Remove the group section if all
members are removed.
binutils/testsuite/
2011-09-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/13180
* binutils-all/group-6.d: New.
* binutils-all/group-6.s: Likewise.
* binutils-all/objcopy.exp: Run group-6 for ELF targrts.
* nm.c (filter_symbols): Treat unique symbols as global symbols.
* doc/binutils.texi (nm): Mention that some lowercase letters
actually indicate global symbols.
* lib/utils-lib.exp (run_dump_test): Allow nm as a program.
* binutils-all/nm.exp: Test running "nm -g" on an object file
containing a unique symbol.
opcodes/
* arm-dis.c (print_insn): init vars moved into private_data structure.
binutils/testsuite/
* binutils-all/arm/simple.s: Demo issue with objdump with
multiple input files
* binutils-all/arm/objdump.exp: added new ARM test case code
* tic6x.h (R_C6000_JUMP_SPLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16, R_C6000_PCR_L16): New relocs.
(SHN_TIC6X_SCOMMON): Define.
bfd/
* elf32-tic6x.h (struct elf32_tic6x_params): New.
(elf32_tic6x_setup): Declare.
* elf32-tic6x.c: Include <limits.h>.
(ELF_DYNAMIC_LINKER, DEFAULT_STACK_SIZE, PLT_ENTRY_SIZE): Define.
(struct elf32_tic6x_link_hash_table, struct elf32_link_hash_entry):
New structures.
(elf32_tic6x_link_hash_table, is_tic6x_elf): New macros.
(tic6x_elf_scom_section, tic6x_elf_scom_symbol,
tic6x_elf_scom_symbol_ptr): New static variables.
(elf32_tic6x_howto_table, elf32_tic6x_howto_table_rel,
elf32_tic6x_reloc_map): Add R_C6000_JUMP_SLOT, R_C6000_EHTYPE,
R_C6000_PCR_H16 and R_C6000_PCR_L16.
(elf32_tic6x_link_hash_newfunc, elf32_tic6x_link_hash_table_create,
elf32_tic6x_link_hash_table_free, elf32_tic6x_setup,
elf32_tic6x_using_dsbt, elf32_tic6x_install_rela,
elf32_tic6x_create_dynamic_sections, elf32_tic6x_make_got_dynreloc,
elf32_tic6x_finish_dynamic_symbol, elf32_tic6x_gc_sweep_hook,
elf32_tic6x_adjust_dynamic_symbol): New static functions.
(elf32_tic6x_relocate_section): For R_C6000_PCR_S21, convert branches
to weak symbols as required by the ABI.
Handle GOT and DSBT_INDEX relocs, and copy relocs to the output file
as needed when generating DSBT output.
(elf32_tic6x_check_relocs, elf32_tic6x_add_symbol_hook,
elf32_tic6x_symbol_processing, elf32_tic6x_section_from_bfd_section,
elf32_tic6x_allocate_dynrelocs, elf32_tic6x_size_dynamic_sections,
elf32_tic6x_always_size_sections, elf32_tic6x_modify_program_headers,
elf32_tic6x_finish_dynamic_sections, elf32_tic6x_plt_sym_val,
elf32_tic6x_copy_private_data, elf32_tic6x_link_omit_section_dynsym):
New static functions.
(ELF_MAXPAGESIZE): Define to 0x1000.
(bfd_elf32_bfd_copy_private_bfd_data,
bfd_elf32_bfd_link_hash_table_create,
bfd_elf32_bfd_link_hash_table_free, elf_backend_can_refcount,
elf_backend_want_got_plt, elf_backend_want_dynbss,
elf_backend_plt_readonly, elf_backend_got_header_size,
elf_backend_gc_sweep_hook, elf_backend_modify_program_headers,
elf_backend_create_dynamic_sections, elf_backend_adjust_dynamic_symbol,
elf_backend_check_relocs, elf_backend_add_symbol_hook,
elf_backend_symbol_processing, elf_backend_link_output_symbol_hook,
elf_backend_section_from_bfd_section,
elf_backend_finish_dynamic_symbol, elf_backend_always_size_sections,
elf32_tic6x_size_dynamic_sections, elf_backend_finish_dynamic_sections,
elf_backend_omit_section_dynsym, elf_backend_plt_sym_val): Define.
* bfd/reloc.c (BFD_RELOC_C6000_JUMP_SLOT, BFD_RELOC_C6000_EHTYPE,
BFD_RELOC_C6000_PCR_H16, BFD_RELOC_C6000_PCR_S16): Add.
* bfd/bfd-in2.h: Regenerate.
* bfd/libbfd.h: Regenerate.
* config.bfd: Accept tic6x-*-* instead of tic6x-*-elf.
gas/
* config/tc-tic6x.c (sbss_section, scom_section, scom_symbol): New
static variables.
(md_begin): Initialize them.
(s_tic6x_scomm): New static function.
(md_pseudo_table): Add "scomm".
(tc_gen_reloc): Really undo all adjustments made by
bfd_install_relocation.
* doc/c-tic6x.texi: Document the .scomm directive.
gas/testsuite/
* gas/tic6x/scomm-directive-1.s: New test.
* gas/tic6x/scomm-directive-1.d: New test.
* gas/tic6x/scomm-directive-2.s: New test.
* gas/tic6x/scomm-directive-2.d: New test.
* gas/tic6x/scomm-directive-3.s: New test.
* gas/tic6x/scomm-directive-3.d: New test.
* gas/tic6x/scomm-directive-4.s: New test.
* gas/tic6x/scomm-directive-4.d: New test.
* gas/tic6x/scomm-directive-5.s: New test.
* gas/tic6x/scomm-directive-5.d: New test.
* gas/tic6x/scomm-directive-6.s: New test.
* gas/tic6x/scomm-directive-6.d: New test.
* gas/tic6x/scomm-directive-7.s: New test.
* gas/tic6x/scomm-directive-7.d: New test.
* gas/tic6x/scomm-directive-8.s: New test.
* gas/tic6x/scomm-directive-8.d: New test.
ld/
* emulparams/elf32_tic6x_le.sh (BIG_OUTPUT_FORMAT, EXTRA_EM_FILE,
GENERATE_SHLIB_SCRIPT): New defines.
(TEXT_START_ADDR): Define differently depending on target.
(.got): Redefine to include "*(.dsbt)".
(SDATA_START_SYMBOLS): Remove, replace with
(OTHER_GOT_SYMBOLS): New.
(OTHER_BSS_SECTIONS): Define only for ELF targets.
* emultempl/tic6xdsbt.em: New file.
* gen-doc.texi: Set C6X.
* ld.texinfo: Likewise.
(Options specific to C6X uClinux targets): New section.
binutils/
* readelf.c (get_symbol_index_type): Handle SCOM for TIC6X.
(dump_relocations): Likewise.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Accept tic6x*-*-uclinux*.
ld/testsuite/
* ld-scripts/crossref.exp: Add CFLAGS for tic6x*-*-*.
* ld-elf/sec-to-seg.exp: Remove tic6x from list of targets defining
pagesize to 1.
* ld-tic6x/tic6x.exp: Add support for DSBT shared library/executable
linking tests.
* ld-tic6x/dsbt.ld: New linker script.
* ld-tic6x/dsbt-be.ld: New linker script.
* ld-tic6x/dsbt-overflow.ld: New linker script.
* ld-tic6x/dsbt-inrange.ld: New linker script.
* ld-tic6x/shlib-1.s: New test.
* ld-tic6x/shlib-2.s: New test.
* ld-tic6x/shlib-app-1r.s: New test.
* ld-tic6x/shlib-app-1.s: New test.
* ld-tic6x/shlib-1.sd: New test.
* ld-tic6x/shlib-1.dd: New test.
* ld-tic6x/shlib-app-1.rd: New test.
* ld-tic6x/shlib-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1.sd: New test.
* ld-tic6x/static-app-1rb.od: New test.
* ld-tic6x/shlib-app-1.dd: New test.
* ld-tic6x/shlib-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.od: New test.
* ld-tic6x/static-app-1r.od: New test.
* ld-tic6x/shlib-1rb.rd: New test.
* ld-tic6x/shlib-app-1rb.dd: New test.
* ld-tic6x/shlib-1rb.sd: New test.
* ld-tic6x/shlib-1rb.dd: New test.
* ld-tic6x/shlib-app-1b.od: New test.
* ld-tic6x/tic6x.exp: New test.
* ld-tic6x/static-app-1rb.rd: New test.
* ld-tic6x/shlib-app-1r.od: New test.
* ld-tic6x/static-app-1.od: New test.
* ld-tic6x/static-app-1b.rd: New test.
* ld-tic6x/static-app-1r.rd: New test.
* ld-tic6x/static-app-1rb.sd: New test.
* ld-tic6x/static-app-1b.sd: New test.
* ld-tic6x/static-app-1rb.dd: New test.
* ld-tic6x/static-app-1r.sd: New test.
* ld-tic6x/static-app-1b.dd: New test.
* ld-tic6x/shlib-1b.rd: New test.
* ld-tic6x/static-app-1r.dd: New test.
* ld-tic6x/shlib-app-1b.rd: New test.
* ld-tic6x/shlib-1r.rd: New test.
* ld-tic6x/shlib-app-1r.rd: New test.
* ld-tic6x/shlib-1b.sd: New test.
* ld-tic6x/static-app-1.rd: New test.
* ld-tic6x/shlib-app-1b.sd: New test.
* ld-tic6x/shlib-1r.sd: New test.
* ld-tic6x/shlib-1b.dd: New test.
* ld-tic6x/shlib-app-1r.sd: New test.
* ld-tic6x/shlib-app-1b.dd: New test.
* ld-tic6x/shlib-1r.dd: New test.
* ld-tic6x/static-app-1.sd: New test.
* ld-tic6x/shlib-app-1r.dd: New test.
* ld-tic6x/static-app-1.dd: New test.
* ld-tic6x/shlib-noindex.rd: New test.
* ld-tic6x/shlib-noindex.dd: New test.
* ld-tic6x/shlib-noindex.sd: New test.
* ld-tic6x/got-reloc-local-1.s: New test.
* ld-tic6x/got-reloc-local-2.s: New test.
* ld-tic6x/got-reloc-local-r.d: New test.
* ld-tic6x/got-reloc-global.s: New test.
* ld-tic6x/got-reloc-global-addend-1.d: New test.
* ld-tic6x/got-reloc-global-addend-1.s: New test.
* ld-tic6x/got-reloc-global-addend-2.d: New test.
* ld-tic6x/got-reloc-inrange.d: New test.
* ld-tic6x/got-reloc-overflow.d: New test.
* ld-tic6x/got-reloc-global-addend-2.s: New test.
* ld-tic6x/dsbt-index-error.d: New test.
* ld-tic6x/dsbt-index.d: New test.
* ld-tic6x/dsbt-index.s: New test.
* ld-tic6x/shlib-app-1.od: New test.
* ld-tic6x/shlib-app-1rb.od: New test.
* ld-tic6x/shlib-1.rd: New test.
* ld-tic6x/weak.d: New test.
* ld-tic6x/weak-be.d: New test.
* ld-tic6x/weak.s: New test.
* ld-tic6x/weak-data.d: New test.
* ld-tic6x/common.d: New test.
* ld-tic6x/common.ld: New test.
* ld-tic6x/common.s: New test.
* config/tc-mips.c (file_ase_mips16): Adjust comment.
(append_insn): Update file_ase_mips16.
(mips_after_parse_args): Don't set file_ase_mips16 here.
gas/testsuite/
* gas/mips/elf_ase_mips16.d: Update test for new MIPS16 ASE flag
semantics.
* gas/mips/elf_ase_mips16-2.d: New test.
* gas/mips/nop.s: Source for the new test.
* gas/mips/mips.exp: Run the new test.
binutils/testsuite/
* lib/binutils-common.exp (regexp_diff): Implement inverse
matching, requested by `!'.
2010-11-15 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/compress.exp: Replace binutils_assemble with
binutils_assemble_flags for --nocompress-debug-sections.
* config/obj-elf.c (elf_adjust_symtab): New. Move group section
processing here from elf_frob_file. Ensure that group signature
symbols have the name of the group.
(elf_frob_file): Move group section processing to
elf_adjust_symtab.
* config/obj-elf.h (elf_adjust_symtab): Declare.
(obj_adjust_symtab): Define.
* config/tc-arm.c (arm_adjust_symtab): Call elf_adjust_symtab.
2010-10-23 Mark Mitchell <mark@codesourcery.com>
* gas/elf/elf.exp: Add group0c test.
* gas/elf/group0c.d: New.
* gas/elf/group0a.d: Expect ".group" for the name of group
sections.
* gas/elf/group0b.d: Likewise.
* gas/elf/group1a.d: Likewise.
* gas/elf/group1b.d: Likewise.
* gas/elf/groupautoa.d: Likewise.
* gas/elf/groupautob.d: Likewise.
* gas/elf/section4.d: Likewise.
* gas/ia64/group-1.d: Likewise. Adjust hard-coded constants.
2010-10-22 Mark Mitchell <mark@codesourcery.com>
* binutils-all/group-5.d: Expect ".group" for the name of group
sections.
* binutils-all/strip-2.d: Likewise.
2010-10-23 Mark Mitchell <mark@codesourcery.com>
* ld-elf/group10.d: Expect ".group" for the name of group
sections.
* ld-elf/group2.d: Likewise.
* ld-elf/group7.d: Likewise.
* binutils-all/copy-2.d: Update not-target list.
* binutils-all/note-1.d: Don't run on h8300.
* binutils-all/objcopy.exp: Don't run strip-10 on msp or hpux.
(objcopy_test): Remove h8300-rtems from xfails.
of more than one byte at a time.
(copy_width): New variable.
(copy_options): Add --interleave-width.
(copy_section): When interleaving copy in units of copy_width
bytes.
(copy_main): Parse the new option.
* doc/binutils: Document the new option.
* NEWS: Mention the new feature.
* binutils-all/objcopy.exp: Add test of new --interleave-width
option.
* dlltool.c (main): Query for bfd's underscoring default for
default target case.
2010-04-27 Kai Tietz <kai.tietz@onevision.com>
* binutils-all/dlltool.exp: Allow test for
arm-wince-pe target.
* objcopy.c (copy_main): Rewrite OPTION_ADD_SECTION code to work
with non-ordinary files like /dev/null.
binutils/testsuite/:
* lib/utils-lib.exp (run_dump_test): Permit option values to use
$srcdir to refer to the source directory.
* binutils-all/add-section.d: New test.
* binutils-all/add-empty-section.d: New test.
* binutils-all/empty-file: New test input file.
* binutils-all/objcopy.exp: Run new tests.
binutils/
2010-01-08 H.J. Lu <hongjiu.lu@intel.com>
* elfedit.c (input_elf_type): New.
(output_elf_type): Likewise.
(elf_type): Likewise.
(update_elf_header): Support updating ELF file type.
(command_line_switch): Add OPTION_INPUT_TYPE and
OPTION_OUTPUT_TYPE.
(options): Likewise.
(usage): Add --input-type and --output-type.
(main): Handle OPTION_INPUT_TYPE and OPTION_OUTPUT_TYPE. Check
one of --output-mach and --output-type must be specified.
* doc/binutils.texi: Document --input-type and --output-type
for elfedit.
binutils/testsuite/
2010-01-08 H.J. Lu <hongjiu.lu@intel.com>
* binutils-all/elfedit-2.d: New.
* binutils-all/elfedit.exp: Run elfedit-2.
* deflex.l: Allow '<' and '>' in ID names.
* defparse.y (EQUAL): New token constant.
(opt_import_name): New rule for emptry or '==' ID.
(expline): Add opt_import_name as last line element.
(impline): Likewise.
* dlltool.c (ifunct): New member its_name.
(export): Likewise.
(append_import): Add its_name argument.
(defexports): Likewise.
(defimport): Likewise.
(scan_drectve_symbols): Adjust calls to def_exports.
(dump_def_info): Print new optinal import/export table
symbol name.
(generate_idata_ofile): Use its_name member.
(make_one_lib_file): Likewise.
(nfunc): Take its_name in account on sort.
* dlltool.h (def_exports): Add its_name as argument.
(def_import): Likewise.
* doc/binutils.texi: Add new def file syntax extension.
* deflex.l (EQUAL): Add rule for '=='.
* NEWS: Mention new feature.
2009-10-23 Kai Tietz <kai.tietz@onevision.com>
* binutils-all/dlltool.exp: Add new test.
* binutils-all/alias-2.def: New file.
* binutils-all/arm/thumb2-cond.s: Use instructions instead of
.short.
gas/
* config/obj-elf.c (obj_elf_ident): Notify section change to the hook.
* config/tc-arm.c (make_mapping_symbol): New function, from
mapping_state. Save mapping symbols in the frag.
(insert_data_mapping_symbol): New.
(mapping_state): Use make_mapping_symbol, improve state transitions.
(mapping_state_2): New. Provide dummy definition.
(opcode_select): Do not call mapping_state.
(s_bss): Call md_elf_section_change_hook instead of mapping_state.
(output_inst): Update use of tc_frag_data.
(new_automatic_it_block): Call mapping_state before emitting the
IT instruction.
(md_assemble): Move mapping_state to just before outputting the
new instruction.
(arm_handle_align): Update use of tc_frag_data.
Call insert_data_mapping_symbol.
(arm_init_frag): Update use of tc_frag_data. Call
mapping_state_2.
(arm_elf_change_section): Always update the mapping symbol FSM state.
(check_mapping_symbols): New function.
(arm_adjust_symtab): Use check_mapping_symbols.
* config/tc-arm.h (struct arm_frag_type): New.
(TC_FRAG_TYPE): Change to struct arm_frag_type.
(TC_FRAG_INIT): Pass max_chars.
(arm_init_frag): Update prototype.
gas/testsuite/
* gas/arm/mapdir.d, gas/arm/mapdir.s: New files.
* gas/arm/mapping.d: Adapted to new symbols generation.
* gas/arm/mapping2.d: New test case.
* gas/arm/mapping2.s: New file.
* gas/arm/mapping3.d: New test case.
* gas/arm/mapping3.s: New file.
* gas/arm/mapping4.d: New test case.
* gas/arm/mapping4.s: New file.
* gas/arm/mapshort-eabi.d: Adapted to new symbols generation.
* gas/elf/section2.e-armeabi: Adapted to new symbols generation.
2009-03-11 Chris Demetriou <cgd@google.com>
* bfd.c (BFD_DETERMINISTIC_OUTPUT): New flag.
* bfd-in2.h: Regenerate.
* archive.c (bfd_ar_hdr_from_filesystem): If BFD_DETERMINISTIC_OUTPUT
flag is set, use 0 for uid, gid, and timestamp, and use 0644 for file
mode.
(bsd_write_armap): Likewise.
(_bfd_archive_bsd_update_armap_timestamp): If BFD_DETERMINISTIC_OUTPUT
flag is set, do nothing.
(coff_write_armap): If BFD_DETERMINISTIC_OUTPUT flag is set, use 0
for timestamp.
[binutils/ChangeLog]
2009-03-11 Chris Demetriou <cgd@google.com>
* ar.c (deterministic): New global variable.
(main): Recognize new 'D' option, which enables 'deterministic mode'.
(usage): Document new 'D' option.
(write_archive): Set BFD_DETERMINISTIC_OUTPUT in output archive's
flags if deterministic mode was requested.
* doc/binutils.texi (ar): Document deterministic mode ('D' option).
[binutils/testsuite/ChangeLog]
2009-03-11 Chris Demetriou <cgd@google.com>
* binutils-all/ar.exp (deterministic_archive): New test.
* gas/all/gas.exp: Expect forward test to fail for MeP.
Expect relax test to fail for MeP.
* gas/mep/relocs.d: Update expected disassembly.
* lib/ld-lib.exp (check_gc_sections_available): Add MeP to list of
targets which do not support garbage collection.
* ld-srec/srec.exp (run_srec_test): Expect tests to fail for MeP.
* ld-elf/group8a.d: Likewise.
* ld-elf/group8b.d: Likewise.
* ld-elf/group9a.d: Likewise.
* ld-elf/group9b.d: Likewise.
* binutils-all/objdump.W: Do not assume that high and low PC
addresses will have been computed.
* binutils-all/group-4.s: New.
* binutils-all/strip-8.d: Likewise.
* binutils-all/strip-9.d: Likewise.
* binutils-all/objcopy.exp: Test objcopy on group-4.s. Run
strip-8 and strip-9.
* binutils-all/group-3.s: New.
* binutils-all/strip-6.d: Likewise.
* binutils-all/strip-7.d: Likewise.
* binutils-all/objcopy.exp: Test objcopy on group-3.s. Run
strip-6 and strip-7.
* binutils-all/group-2.s: New.
* binutils-all/strip-4.d: Likewise.
* binutils-all/strip-5.d: Likewise.
* binutils-all/objcopy.exp: Test objcopy on group-2.s. Run
strip-4 and strip-5.
* Makefile.am (BFD32_LIBS): Add compress.lo.
(BFD32_LIBS_CFILES): Add compress.c.
(BFD_H_FILES): Likewise.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* config.in: Add HAVE_ZLIB_H
* configure.in: Add test for libz and zlib.h
* configure: Regenerate.
* dwarf2.c (read_section): New function.
(read_indirect_string): Call new function read_section.
(read_abbrevs): Likewise.
(decode_line_info): Likewise.
(read_debug_ranges): Likewise.
(find_line): Call new function read_section when just one
.zdebug_info section is found, otherwise read and compress
multiple sections.
(_bfd_dwarf2_cleanup_debug_info): Free sec_info_ptr.
* elf.c (_bfd_elf_make_section_from_shdr): Add zdebug prefix.
(special_sections_z): New struct.
(special_sections): Refer to special_sections_z.
* elfxx-mips.c (_bfd_mips_elf_section_from_shdr): Recognize
sections named .zdebug_*.
(_bfd_mips_elf_fake_sections): Likewise.
* compress.c: New file.
(bfd_uncompress_section_contents): New function.
bfd/doc/
* Makefile.am (BFD_H_DEP): Add ../compress.c.
* Makefile.in: Regenerate.
binutils/
* config.in: Add HAVE_ZLIB_H
* configure.in: Add test for libz and zlib.h
* configure: Regenerate.
* dwarf.c (debug_displays): Add .zdebug_* strings.
* dwarf.h (struct dwarf_section): Add fields uncompressed_namd
and compressed_name.
* objdump.c (load_debug_section): Call
bfd_uncompress_section_contents when loading a compressed
section.
(dump_dwarf_section): Recognize compressed section name.
(mach_o_dwarf_sections): Rename as
mach_o_uncompressed_dwarf_sections.
(mach_o_compressed_dwarf_sections): New variable.
(generic_dwarf_section): Rename as
generic_uncompressed_dwarf_sections.
(generic_compressed_dwarf_sections): New variable.
(check_mach_o_dwarf): Save and restore
mach_o_compressed_dwarf_sections.
* readelf.c: Add #include for config.h and zlib.h
(process_section_headers): Recognize compressed section name.
(uncompress_section_contents): New function.
(load_debug_section): Call uncompress_section_contents when
loading a compressed section.
(display_debug_section): Recognize compressed section name.
binutils/testsuite:
* binutils-all/objdump.exp: Add test for objdump -s on a file
with a compressed debug section. Add test for objdump -W on a
file that contains a compressed debug section.
* binutils-all/readelf.exp: Call readelf_compressed_wa_test.
(readelf_compressed_wa_test): New function.
* binutils-all/dw2-compressed.S: New file.
* binutils-all/objdump.W: New file.
* binutils-all/objdump.s: New file.
* binutils-all/readelf.wa: New file.
* elf.c (assign_file_positions_for_load_sections): Adjust pre-section
gaps based on VMA and P_VADDR instead of LMA and P_PADDR addresses.
binutils/testsuite/
* binutils-all/objcopy.exp: Call KEEP_DEBUG_SYMBOLS_AND_TEST_COPY.
(keep_debug_symbols_and_test_copy): New function.
(test5, test6): New variables.
* bfd/archive.c (_bfd_find_nested_archive): New function.
(get_extended_arelt_filename): Add origin parameter.
(_bfd_generic_read_ar_hdr_mag): Deal with extended name
combined with a file offset.
(append_relative_path): New function.
(_bfd_get_elt_at_filepos): Deal with external members and
nested archives.
(bfd_generic_openr_next_archived_file): Thin archives.
(bfd_generic_archive_p): Recognize new magic string.
(adjust_relative_path): New function.
(_bfd_construct_extended_name_table): Construct extended
names for thin archive members.
(_bfd_write_archive_contents): Emit new magic string, skip
copying files for thin archives.
* bfd/bfd-in.h (bfd_is_thin_archive): New macro.
* bfd/bfd.c (struct bfd): New fields for thin archives.
* bfd/libbfd-in.h (struct areltdata): New field for thin archives.
* bfd/opncls.c (bfd_close): Delete BFDs for nested archives.
* binutils/ar.c (make_thin_archive): New global flag.
(map_over_members): Deal with full pathnames in thin archives.
(usage, main): Add 'T' option for building thin archives.
(replace_members): Pass thin archive flag to ar_emul_append.
* binutils/arsup.c (ar_open): Initialize new flag.
* binutils/binemul.c (ar_emul_append): Add new parameter for
flattening nested archives.
(do_ar_emul_default_append): New function.
(ar_emul_default_append): Factored out recursive code.
* binutils/binemul.h (ar_emul_default_append): Add new parameter.
(struct bin_emulation_xfer_struct): New parameter for ar_append.
* binutils/dlltool.c (gen_lib_file): Initialize thin archive flag.
* binutils/emul_aix.c (ar_emul_aix_internal): Add new flatten
parameter, currently unimplemented.
All callers changed.
* binutils/objcopy.c (copy_archive): Preserve thin archive flag.
* binutils/doc/binutils.texi: Update ar documentation.
* binutils/testsuite/binutils-all/ar.exp: Add thin archive tests.
* include/aout/ar.h (ARMAGT): New magic string for thin archives.
(dump_sects, cmdline_dump_sects): Use the new type.
(options): Add --string-dump option.
(request_dump): Rename to request_dump_bynumber. Use dump_type.
(request_dump_byname): Use dump_type.
(parse_args): Parse --string-dump option.
(process_section_headers): Fix calls to request_dump.
(initialise_dumps_byname): Likewise.
(dump_section): Rename to dump_section_as_bytes.
(dump_section_as_strings): New function. Display the contents of a section as printable strings.
(process_section_contents): String dump the section if requested.
(process_object): Use dump_type.
(main): Likewise.
* Makefile.am: Add dependency for readelf.c on safe-ctype.h.
* Makefile.in: Regenerate.
* NEWS: Mention the new feature.
* doc/binutils.texi: Document the new feature.
* testsuite/binutils-all/dumptest.s: New test file.
* testsuite/binutils-all/readelf.exp: Add test of readelf's -p switch.
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* elf32-arm.c (elf32_arm_compare_mapping): Compare first on vma,
then on type.
binutils/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* binutils-all/ar.exp (long_filenames): Delete temporary files on
the host.
* binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if
host is local.
* binutils-all/objcopy.exp: Use ${srecfile} to get the name of the
srec file to be passed to binutils_run.
(objcopy_test_readelf): Use remote_exec.
* binutils-all/readelf.exp (readelf_find_size): Use remote_exec.
(readelf_test): Likewise.
(readelf_wi_test): Likewise.
* lib/utils-lib.exp (run_dump_test): Only check "which $binary" if
host is local. Use remote_exec. Use $tempfile not
tmpdir/bintest.o.
gas:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* as.c (main): Flush stderr before printing listings to ensure
consistent output order across platforms.
gas/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* lib/gas-defs.exp (gas_version): Use remote_* functions instead
of exec.
(gas_host_run): New.
(gas_run): Use gas_host_run.
(gas_start): Likewise.
(run_dump_test): Likewise.
(objdump): Use gas_host_run.
(objdump_start_no_subdir): Likewise.
* lib/gas-dg.exp (gas-dg-test): Use "remote_file host delete".
* lib/run: Remove.
* gas/macros/macros.exp: Download app4b.s to host.
* gas/i386/i386.exp (gas_64_check): Use gas_host_run.
(gas_32_check): Likewise.
* gas/maxq10/maxq10.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/maxq20/maxq20.exp (gas_64_check): Likewise
(gas_32_check): Likewise.
* gas/sparc/sparc.exp (gas_64_check): Likewise.
* gas/cfi/cfi.exp: Likewise.
* gas/elf/elf.exp (run_list_test): Likewise. Use temporary file
for readelf output in place of pipe.
* gas/all/gas.exp: Download incbin.dat to host.
(do_comment): Allow \r\r\n.
ld:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ldlang.c (sort_sections_by_lma): Sort by internal id after lma
for stable sort.
ld/testsuite:
2007-08-28 Mark Shinwell <shinwell@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* ld-elfcomm/elfcomm.exp: Use run_host_cmd. Only check "which
$CC" if host is local.
* ld-checks/checks.exp: Use run_host_cmd.
* ld-elf/exclude.exp: Likewise.
* ld-elf/elf.exp: Download merge.ld if host is remote.
* ld-elf/binutils.exp (binutils_test): Use remote_exec.
* ld-elf/tls_common.exp: Use run_host_cmd.
* lib/ld-lib.exp (ld_version): Only check "which $ld" if host is
local. Use remote_exec.
(run_host_cmd): New.
(run_host_cmd_yesno): New.
(default_ld_relocate): Use run_host_cmd_yesno.
(default_ld_link): Likewise.
(default_ld_simple_link): Use run_host_cmd.
(default_ld_compile): Only check "which $ccprog" if host is local.
Use remote_file and remote_exec.
(default_ld_assemble): Only check "which $as" if host is local.
Use run_host_cmd.
(default_ld_nm): Use remote_exec, remote_upload and remote_file.
(run_dump_test): Use remote_exec, remote_upload and remote_file.
Only check "which $binary" if host is local.
(run_ld_link_tests): Use remote_exec, remote_upload and
remote_file.
* ld-selective/selective.exp: Only check "which $CXX" if host is
local. Use remote_exec.
* ld-scripts/phdrs.exp: Only check "which $objdump" if host is
local. Use run_host_cmd.
* ld-scripts/phdrs2.exp: Likewise.
* ld-scripts/weak.exp: Likewise.
* ld-undefined/weak-undef.exp: Likewise.
* ld-scripts/crossref.exp: Only check "which $CC" if host is local.
Use run_host_cmd.
* ld-scripts/map-address.exp: Upload map_address.map if host is
remote.
* ld-srec/srec.exp (run_srec_tests): Use run_host_cmd. Only check
"which $CC" and "which $CXX" if host is local.
* ld-undefined/undefined.exp: Only check "which $CC" if host is
local. Use remote_file and run_host_cmd.
* config/default.exp: Use remote_exec to create tmpdir.
Retype 'keep' to bfd_boolean.
* binutils-all/objcopy.exp: Add test for stripping a symbol used in a relocation.
* binutils-all/needed-by-reloc.s: New file.
PR binutils/4348
* objcopy.c (copy_object): Don't stop when there are no
sections to be copied.
testsuite/
2007-04-12 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/4348
* binutils-all/empty.s: New file.
* binutils-all/strip-3.d: Likewise.
* binutils-all/objcopy.exp: Run strip-3 for ELF target.
2005-11-15 Jan Beulich <jbeulich@novell.com>
* config/default.exp (link_or_copy): New. Use it for setting
up assembler and linker for the compiler to use.
ld/testsuite/
2005-11-15 Jan Beulich <jbeulich@novell.com>
* ld-bootstrap/bootstrap.exp: Delete ld-partial.o and ld[123]*
after test.
* ld-elf/elf.exp: Delete preinit, init, and fini after test.
* ld-elf/sec64k.exp: Use macro and repeat in generated source
files. Delete object files after test.
2005-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR ld/251
* binutils-all/group.s: New file.
* binutils-all/objcopy.exp (objcopy_test_readelf): New
procedure.
Use it to test ELF group.
ld/testsuite/
2005-10-20 H.J. Lu <hongjiu.lu@intel.com>
PR ld/251
* ld-elf/group.2d: New file.
2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1487
* binutils-all/objcopy.exp (objcopy_test): New procedure.
Use it to test simple copy, ia64 link order and ELF unknown
section type.
* binutils-all/unknown.s: New file.
ld/testsuite/
2005-10-19 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/1487
* ld-elf/unknown.d: New file.
