eb8f2b9c44
675 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jose E. Marchesi
|
6451799480 |
binutils: support for the SPARC M8 processor
This patch adds support for the new SPARC M8 processor (implementing OSA
2017) to binutils.
New instructions:
- Dictionary Unpack
+ dictunpack
- Partitioned Compare with shifted result
+ Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl
+ Unsigned variants: fpcmpu{le,gt}{8,16,32}shl
- Partitioned Dual-Equal compared, with shifted result
+ fpcmpde{8,16,32}shl
- Partitioned Unsigned Range Compare, with shifted result
+ fpcmpur{8,16,32}shl
- 64-bit shifts on Floating-Point registers
+ fps{ll,ra,rl}64x
- Misaligned loads and stores
+ ldm{sh,uh,sw,uw,x,ux}
+ ldm{sh,uh,sw,uw,x,ux}a
+ ldmf{s,d}
+ ldmf{s,d}a
+ stm{h,w,x}
+ stm{h,w,x}a
+ stmf{s,d}
+ stmf{s,d}a
- Oracle Numbers
+ on{add,sub,mul,div}
- Reverse Bytes/Bits
+ revbitsb
+ revbytes{h,w,x}
- Run-Length instructions
+ rle_burst
+ rle_length
- New crypto instructions
+ sha3
- Instruction to read the new register %entropy
+ rd %entropy
New Alternate Address Identifiers:
- 0x24, #ASI_CORE_COMMIT_COUNT
- 0x24, #ASI_CORE_SELECT_COUNT
- 0x48, #ASI_ARF_ECC_REG
- 0x53, #ASI_ITLB_PROBE
- 0x58, #ASI_DSFAR
- 0x5a, #ASI_DTLB_PROBE_PRIMARY
- 0x5b, #ASI_DTLB_PROBE_REAL
- 0x64, #ASI_CORE_SELECT_COMMIT_NHT
The new assembler command-line options for selecting the M8 architecture
are:
-Av9m8 or -Asparc6 for 64-bit binaries.
-Av8plusm8 for 32-bit (v8+) binaries.
The corresponding disassembler command-line options are:
-msparc:v9m8 for 64-bit binaries.
-msparc:v8plusm8 for 32-bit (v8+) binaries.
Tested for regressions in the following targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
bfd/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v9m8): Define.
(bfd_mach_sparc_v8plusm8): Likewise.
(bfd_mach_sparc_v9_p): Adjust to M8.
(bfd_mach_sparc_64bit_p): Likewise.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and
bfd_mach_sparc_v8plusm8.
* bfd-in2.h: Regenerated.
* cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and
sparc:v8plusm8.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle
bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw
capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and
SHA3.
* elf32-sparc.c (elf32_sparc_final_write_processing): Handle
bfd_mach_sparc_v8plusm8.
binutils/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* NEWS: Mention the SPARC M8 support.
gas/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_arch_table): Entries for `sparc6',
`v9m8' and `v8plusm8'.
(sparc_md_end): Handle SPARC_OPCODE_ARCH_M8.
(get_hwcap_name): Support the M8 hardware capabilities.
(sparc_ip): Handle new operand types.
* doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and
-Asparc6, and the corresponding -xarch aliases.
* testsuite/gas/sparc/sparc6.s: New file.
* testsuite/gas/sparc/sparc6.d: Likewise.
* testsuite/gas/sparc/sparc6-diag.s: Likewise.
* testsuite/gas/sparc/sparc6-diag.l: Likewise.
* testsuite/gas/sparc/fpcmpshl.s: Likewise.
* testsuite/gas/sparc/fpcmpshl.d: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.s: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.l: Likewise.
* testsuite/gas/sparc/ldm-stm.s: Likewise.
* testsuite/gas/sparc/ldm-stm.d: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.s: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.l: Likewise.
* testsuite/gas/sparc/ldmf-stmf.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf.d: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise.
* testsuite/gas/sparc/on.s: Likewise.
* testsuite/gas/sparc/on.d: Likewise.
* testsuite/gas/sparc/on-diag.s: Likewise.
* testsuite/gas/sparc/on-diag.l: Likewise.
* testsuite/gas/sparc/rle.s: Likewise.
* testsuite/gas/sparc/rle.d: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests.
* testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY.
* testsuite/gas/sparc/rdasr.d: Likewise.
include/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define.
(ELF_SPARC_HWCAP2_ONADDSUB): Likewise.
(ELF_SPARC_HWCAP2_ONMUL): Likewise.
(ELF_SPARC_HWCAP2_ONDIV): Likewise.
(ELF_SPARC_HWCAP2_DICTUNP): Likewise.
(ELF_SPARC_HWCAP2_FPCMPSHL): Likewise.
(ELF_SPARC_HWCAP2_RLE): Likewise.
(ELF_SPARC_HWCAP2_SHA3): Likewise.
* opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8
and adjust SPARC_OPCODE_ARCH_MAX.
(HWCAP2_SPARC6): Define.
(HWCAP2_ONADDSUB): Likewise.
(HWCAP2_ONMUL): Likewise.
(HWCAP2_ONDIV): Likewise.
(HWCAP2_DICTUNP): Likewise.
(HWCAP2_FPCMPSHL): Likewise.
(HWCAP2_RLE): Likewise.
(HWCAP2_SHA3): Likewise.
(OPM): Likewise.
(OPMI): Likewise.
(ONFCN): Likewise.
(REVFCN): Likewise.
(SIMM10): Likewise.
opcodes/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8.
(X_IMM2): Define.
(compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and
bfd_mach_sparc_v9m8.
(print_insn_sparc): Handle new operand types.
* sparc-opc.c (MASK_M8): Define.
(v6): Add MASK_M8.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Likewise.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(v9andleon): Likewise.
(m8): Define.
(HWS_VM8): Define.
(HWS2_VM8): Likewise.
(sparc_opcode_archs): Add entry for "m8".
(sparc_opcodes): Add OSA2017 and M8 instructions
dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl,
fpx{ll,ra,rl}64x,
ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d},
ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb,
revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x},
stm{h,w,x}a, stmf{s,d}, stmf{s,d}a.
(asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT,
ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR,
ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL,
ASI_CORE_SELECT_COMMIT_NHT.
|
||
Maciej W. Rozycki
|
25499ac7ee |
MIPS16e2: Add MIPS16e2 ASE support
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
|
||
Claudiu Zissulescu
|
53a346d823 |
[ARC] Object attributes.
gas/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/attr-arc600.d: New file. * testsuite/gas/arc/attr-arc600_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc600_norm.d: Likewise. * testsuite/gas/arc/attr-arc601.d: Likewise. * testsuite/gas/arc/attr-arc601_mul32x16.d: Likewise. * testsuite/gas/arc/attr-arc601_mul64.d: Likewise. * testsuite/gas/arc/attr-arc601_norm.d: Likewise. * testsuite/gas/arc/attr-arc700.d: Likewise. * testsuite/gas/arc/attr-arcem.d: Likewise. * testsuite/gas/arc/attr-archs.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.d: Likewise. * testsuite/gas/arc/attr-autodetect-1.s: Likewise. * testsuite/gas/arc/attr-cpu-a601.d: Likewise. * testsuite/gas/arc/attr-cpu-a601.s: Likewise. * testsuite/gas/arc/attr-cpu-a700.d: Likewise. * testsuite/gas/arc/attr-cpu-a700.s: Likewise. * testsuite/gas/arc/attr-cpu-em.d: Likewise. * testsuite/gas/arc/attr-cpu-em.s: Likewise. * testsuite/gas/arc/attr-cpu-hs.d: Likewise. * testsuite/gas/arc/attr-cpu-hs.s: Likewise. * testsuite/gas/arc/attr-em.d: Likewise. * testsuite/gas/arc/attr-em4.d: Likewise. * testsuite/gas/arc/attr-em4_dmips.d: Likewise. * testsuite/gas/arc/attr-em4_fpuda.d: Likewise. * testsuite/gas/arc/attr-em4_fpus.d: Likewise. * testsuite/gas/arc/attr-hs.d: Likewise. * testsuite/gas/arc/attr-hs34.d: Likewise. * testsuite/gas/arc/attr-hs38.d: Likewise. * testsuite/gas/arc/attr-hs38_linux.d: Likewise. * testsuite/gas/arc/attr-mul64.d: Likewise. * testsuite/gas/arc/attr-name.d: Likewise. * testsuite/gas/arc/attr-name.s: Likewise. * testsuite/gas/arc/attr-nps400.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.d: Likewise. * testsuite/gas/arc/attr-override-mcpu.s * testsuite/gas/arc/attr-quarkse_em.d: Likewise. * testsuite/gas/arc/blank.s: Likewise. * testsuite/gas/elf/section2.e-arc: Likewise. * testsuite/gas/arc/cpu-pseudop-1.d: Update test. * testsuite/gas/arc/cpu-pseudop-2.d: Likewise. * testsuite/gas/arc/nps400-0.d: Likewise. * testsuite/gas/elf/elf.exp: Set target_machine for ARC. * config/tc-arc.c (opcode/arc-attrs.h): Include. (ARC_GET_FLAG, ARC_SET_FLAG, streq): Define. (arc_attribute): Declare new function. (md_pseudo_table): Add arc_attribute. (cpu_types): Rename default cpu features. (selected_cpu): Set the default OSABI flag. (mpy_option): New variable. (pic_option): Likewise. (sda_option): Likewise. (tls_option): Likewise. (feature_type, feature_list): Remove. (arc_initial_eflag): Likewise. (attributes_set_explicitly): New variable. (arc_check_feature): Check also for the conflicting features. (arc_select_cpu): Refactor assignment of selected_cpu.eflags. (arc_option): Remove setting of private flags and architecture. (check_cpu_feature): Refactor feature names. (autodetect_attributes): New function. (assemble_tokens): Use above function. (md_parse_option): Refactor feature names. (arc_attribute): New function. (arc_set_attribute_int): Likewise. (arc_set_attribute_string): Likewise. (arc_stralloc): Likewise. (arc_set_public_attributes): Likewise. (arc_md_end): Likewise. (arc_copy_symbol_attributes): Likewise. (rc_convert_symbolic_attribute): Likewise. * config/tc-arc.h (md_end): Define. (CONVERT_SYMBOLIC_ATTRIBUTE): Likewise. (TC_COPY_SYMBOL_ATTRIBUTES): Likewise. * doc/c-arc.texi: Document ARC object attributes. binutils/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * readelf.c (decode_ARC_machine_flags): Recognize OSABI v4. (get_arc_section_type_name): New function. (get_section_type_name): Use the above function. (display_arc_attribute): New function. (process_arc_specific): Likewise. (process_arch_specific): Handle ARC specific information. * testsuite/binutils-all/strip-3.d: Consider ARC.attributes section. include/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * elf/arc.h (SHT_ARC_ATTRIBUTES): Define. (Tag_ARC_*): Define. (E_ARC_OSABI_V4): Define. (E_ARC_OSABI_CURRENT): Reassign it. (TAG_CPU_*): Define. * opcode/arc-attrs.h: New file. * opcode/arc.h (insn_subclass_t): Assign enum values. (insn_subclass_t): Update enum with QUARKSE1, QUARKSE2, and LL64. (ARC_EA, ARC_CD, ARC_LLOCK, ARC_ATOMIC, ARC_MPY, ARC_MULT) (ARC_NPS400, ARC_DPFP, ARC_SPFP, ARC_FPU, ARC_FPUDA, ARC_SWAP) (ARC_NORM, ARC_BSCAN, ARC_UIX, ARC_TSTAMP, ARC_VBFDW) (ARC_BARREL, ARC_DSPA, ARC_SHIFT, ARC_INTR, ARC_DIV, ARC_XMAC) (ARC_CRC): Delete. bfd/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * elf32-arc.c (FEATURE_LIST_NAME): Define. (CONFLICT_LIST): Likewise. (opcode/arc-attrs.h): Include. (arc_elf_print_private_bfd_data): Print OSABI v4 flag. (arc_extract_features): New file. (arc_stralloc): Likewise. (arc_elf_merge_attributes): Likewise. (arc_elf_merge_private_bfd_data): Use object attributes. (bfd_arc_get_mach_from_attributes): New function. (arc_elf_object_p): Use object attributes. (arc_elf_final_write_processing): Likewise. (elf32_arc_obj_attrs_arg_type): New function. (elf32_arc_obj_attrs_handle_unknown): Likewise. (elf32_arc_section_from_shdr): Likewise. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Likewise. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_handle_unknown): Likewise. (elf_backend_section_from_shdr): Likewise. ld/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/ld-arc/attr-merge-0.d: New file. * testsuite/ld-arc/attr-merge-0.s: Likewise. * testsuite/ld-arc/attr-merge-0e.s: Likewise. * testsuite/ld-arc/attr-merge-1.d: Likewise. * testsuite/ld-arc/attr-merge-1.s: Likewise. * testsuite/ld-arc/attr-merge-1e.s: Likewise. * testsuite/ld-arc/attr-merge-2.d: Likewise. * testsuite/ld-arc/attr-merge-2.s: Likewise. * testsuite/ld-arc/attr-merge-3.d: Likewise. * testsuite/ld-arc/attr-merge-3.s: Likewise. * testsuite/ld-arc/attr-merge-3e.s: Likewise. * testsuite/ld-arc/attr-merge-4.s: Likewise. * testsuite/ld-arc/attr-merge-5.d: Likewise. * testsuite/ld-arc/attr-merge-5a.s: Likewise. * testsuite/ld-arc/attr-merge-5b.s: Likewise. * testsuite/ld-arc/attr-merge-conflict-isa.d: Likewise. * testsuite/ld-arc/attr-merge-err-isa.d: Likewise. * testsuite/ld-arc/attr-merge-incompatible-cpu.d: Likewise. * testsuite/ld-arc/got-01.d: Update test. * testsuite/ld-arc/attr-merge-err-quarkse.d: New file. * testsuite/ld-arc/attr-quarkse.s: Likewise. * testsuite/ld-arc/attr-quarkse2.s: Likewise. opcodes/ 2017-05-10 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (parse_option): Update quarkse_em option.. * arc-ext-tbl.h (dsp_fp_flt2i, dsp_fp_i2flt): Change subclass to QUARKSE1. (dsp_fp_div, dsp_fp_cmp): Change subclass to QUARKSE2. |
||
H.J. Lu
|
a91e1603af |
Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
|
||
Palmer Dabbelt
|
b52920324f |
RISC-V: Resurrect GP-relative disassembly hints
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
|
||
Pip Cet
|
f96bd6c2d7 |
Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils.
binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate. |
||
|
Pip Cet
|
8fb740dd30 |
Add minimal support for WebAssembly backend to the BFD library.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
|
||
Nick Clifton
|
a8be5506b6 |
Add support for a GNU BUILD note type to record the enum size.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD note type. binutils * readelf.c (print_gnu_build_attribute_name): Add support for GNU_BUILD_ATTRIBUTE_SHORT_ENUM. |
||
|
Nick Clifton
|
f955cccff3 |
Rename R_AARCH64_TLSDESC_LD64_LO12_NC to R_AARCH64_TLSDESC_LD64_LO12 and R_AARCH64_TLSDESC_ADD_LO12_NC to R_AARCH64_TLSDESC_ADD_LO12.
PR binutils/21202 include * elf/aarch64.h (R_AARCH64_TLSDESC_LD64_LO12_NC): Rename to R_AARCH64_TLSDESC_LD64_LO12. (R_AARCH64_TLSDESC_ADD_LO12_NC): Rename to R_AARCH64_TLSDESC_ADD_LO12_NC. bfd * reloc.c (BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. (BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC): Rename to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Update reloc names. (IS_AARCH64_TLSDESC_RELOC): Likewise. (elfNN_aarch64_howto_table): Likewise. (aarch64_tls_transition_without_check): Likewise. (aarch64_reloc_got_type): Likewise. (elfNN_aarch64_final_link_relocate): Likewise. (elfNN_aarch64_tls_relax): Likewise. (elfNN_aarch64_relocate_section): Likewise. (elfNN_aarch64_gc_sweep_hook): Likewise. (elfNN_aarch64_check_relocs): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. (_bfd_aarch64_elf_resolve_relocation): Likewise. gas * config/tc-aarch64.c (reloc_table): Rename BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. Rname BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to BFD_RELOC_AARCH64_TLSDESC_ADD_LO12. (md_apply_fix): Likewise. (aarch64_force_relocation): Likewise. * testsuite/gas/aarch64/tls.d: Update regexp. ld * testsuite/ld-aarch64/ifunc-5r-local.d: Update regexp. |
||
|
Nick Clifton
|
55e22ca83a |
Add basic recognition of new EM_ ELF machine numbers.
include * elf/common.h (EM_LANAI): New machine number. (EM_BPF): Likewise. (EM_WEBASSEMBLY): Likewise. Move low value, deprecated, numbers to their numerical equivalents. binutils * readelf.c (get_machine_name): Rearrange switch table in order of increasing machine number. Add missing entries. |
||
|
H.J. Lu
|
1fc87489b4 |
Properly dump NT_GNU_PROPERTY_TYPE_0
Property type and datasz are always 4 bytes for both 32-bit and 64-bit objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64 objects. We should also check GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER. binutils/ PR binutils/21231 * readelf.c (decode_x86_isa): Change argument to unsigned int. (print_gnu_property_note): Retrieve property type and datasz as 4-byte integer. Consolidate property datasz check. Check GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER. * testsuite/binutils-all/i386/pr21231a.d: New file. * testsuite/binutils-all/i386/pr21231a.s: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.s: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. include/ PR binutils/21231 * elf/common.h (GNU_PROPERTY_LOPROC): New. (GNU_PROPERTY_HIPROC): Likewise. (GNU_PROPERTY_LOUSER): Likewise. (GNU_PROPERTY_HIUSER): Likewise. |
||
|
Nick Clifton
|
9ef920e933 |
Add support for displaying and merging GNU_BUILD_NOTEs.
include * elf/common.h (SHF_GNU_BUILD_NOTE): Define. (NT_GNU_PROPERTY_TYPE_0): Define. (NT_GNU_BUILD_ATTRIBUTE_OPEN): Define. (NT_GNU_BUILD_ATTRIBUTE_FUN): Define. (GNU_BUILD_ATTRIBUTE_TYPE_NUMERIC): Define. (GNU_BUILD_ATTRIBUTE_TYPE_STRING): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_TRUE): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_FALSE): Define. (GNU_BUILD_ATTRIBUTE_VERSION): Define. (GNU_BUILD_ATTRIBUTE_STACK_PROT): Define. (GNU_BUILD_ATTRIBUTE_RELRO): Define. (GNU_BUILD_ATTRIBUTE_STACK_SIZE): Define. (GNU_BUILD_ATTRIBUTE_TOOL): Define. (GNU_BUILD_ATTRIBUTE_ABI): Define. (GNU_BUILD_ATTRIBUTE_PIC): Define. (NOTE_GNU_PROPERTY_SECTION_NAME): Define. (GNU_BUILD_ATTRS_SECTION_NAME): Define. (GNU_PROPERTY_STACK_SIZE): Define. (GNU_PROPERTY_NO_COPY_ON_PROTECTED): Define. (GNU_PROPERTY_X86_ISA_1_USED): Define. (GNU_PROPERTY_X86_ISA_1_NEEDED): Define. (GNU_PROPERTY_X86_ISA_1_486): Define. (GNU_PROPERTY_X86_ISA_1_586): Define. (GNU_PROPERTY_X86_ISA_1_686): Define. (GNU_PROPERTY_X86_ISA_1_SSE): Define. (GNU_PROPERTY_X86_ISA_1_SSE2): Define. (GNU_PROPERTY_X86_ISA_1_SSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Define. (GNU_PROPERTY_X86_ISA_1_AVX): Define. (GNU_PROPERTY_X86_ISA_1_AVX2): Define. (GNU_PROPERTY_X86_ISA_1_AVX512F): Define. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Define. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Define. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Define. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Define. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Define. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Define. binutils* readelf.c (get_note_type): Add support for GNU_BUILD_NOTEs. (get_gnu_elf_note_type): Add support for GNU_PROPERTY_NOTEs. (decode_x86_isa): New function. (print_gnu_property_note): New function. (print_gnu_note): Handle GNU_PROPERTY_NOTEs. (print_gnu_build_attribute_description): New function. (print_gnu_build_attribute_name): New function. (process_note): Add support for GNU_BUILD_NOTEs. * objcopy.c (--merge-notes): New command line option. (copy_options): Add merge-notes. (copy_usage): Likewise. (is_merge_note_section): New function. (merge_gnu_build_notes): New function. (copy_object): Merge note sections if asked to do so. (skip_section): Add skip_copy parameter. Add support for skipping merged note sections. (copy_relocations_in_section): Update call to skip_section. (copy_section): Likewise. (copy_main): Add support for merge-notes option. * doc/binutils.texi: Document the new option to objcopy. * NEWS: Mention the new feature. * testsuite/binutils-all/note-2-32.d: New test. Checks note merging on 32-bit targets. * testsuite/binutils-all/note-2-32.s: New test source file. * testsuite/binutils-all/note-2-64.d: New test. Like note-2-32.d but for 64-bit targets. * testsuite/binutils-all/note-2-64.s: New test source file. * testsuite/binutils-all/objcopy.exp: Run the new test. |
||
Alan Modra
|
7ba71655a4 |
PowerPC addpcis fix
This came up because I was looking at ld/tmpdir/addpcis.o and noticed the odd addends on REL16DX_HA. They ought to both be -4. The error crept in due REL16DX_HA howto being pc-relative (as indeed it should be), and code at gas/write.c:1001 after this comment /* Make it pc-relative. If the back-end code has not selected a pc-relative reloc, cancel the adjustment we do later on all pc-relative relocs. */ *not* cancelling the pc-relative adjustment. So I've made a dummy non-relative split reloc so that the generic code handles this, rather than attempting to add hacks later in md_apply_fix which would not be very robust. Having the new internal reloc also makes it easy to support addpcis rx,sym@ha as an equivalent to addpcis rx,(sym-0f)@ha 0: The patch also fixes overflow checking, which must test whether the addi will overflow too since @l relocs don't have any overflow check. Lastly, since I was poking at md_apply_fix, I arranged to have the generic gas/write.c code emit errors for subtraction expressions where we lack reloc support. include/ * elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment. * elf/ppc.h (R_PPC_16DX_HA): Likewise. bfd/ * reloc.c (BFD_RELOC_PPC_16DX_HA): New. * elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto. (ppc64_elf_reloc_type_lookup): Translate new bfd reloc. (ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA. (ppc64_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto. (ppc_elf_reloc_type_lookup): Translate new bfd reloc. (ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. gas/ * config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis. (md_apply_fix): Remove fx_subsy check. Move code converting to pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code emiiting errors on seeing fx_pcrel set on unexpected relocs, as that is done now by the generic code via.. * config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define. (TC_VALIDATE_FIX_SUB): Define. ld/ * testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at limits of addpcis range. |
||
Alan Hayward
|
fae1616f5f |
[PATCH] Add NT_ARM_SVE
* elf/common.h (NT_ARM_SVE): Define. |
||
|
Alan Modra
|
2571583aed | Update year range in copyright notice of all files. | ||
Dimitar Dimitrov
|
889294f6ff |
PRU BFD support
include/ * elf/common.h: Add PRU ELF. * elf/pru.h: New file. * opcode/pru.h: New file. * dis-asm.h (print_insn_pru): Declare. bfd/ * archures.c: Add bfd_arch_pru. * Makefile.am: Add PRU target. * config.bfd: Ditto. * configure.ac: Ditto. * elf-bfd.h (enum elf_target_id): Add PRU_ELF_DATA. * targets.c: Add pru_elf32_vec. * reloc.c: Add PRU relocations. * cpu-pru.c: New file. * elf32-pru.c: New file. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. * bfd-in2.h: Regenerate * libbfd.h: Regenerate. Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu> |
||
Andrew Waterman
|
2922d21da1 |
Re-work RISC-V gas flags: now we just support -mabi and -march
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
|
||
|
Andrew Waterman
|
45f764234a |
Rework RISC-V relocations
Before this commit we didn't cleanly support CFI directives because the internal offsets used to get relaxed which broke them. This patch significantly reworks how we handle linker relaxations: * DWARF is now properly supported * There is a ".option norelax" to disable relaxations, for when users write assembly that can't be relaxed (if it's to be later patched up, for example). * There is an additional _RELAX relocation that specifies when previous relocations can be relaxed. We're in the process of documenting the RISC-V ELF ABI, which will include documentation of our relocations https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md but we expect that this relocation set will remain ABI compatible in the future (ie, it's safe to release). Thanks to Kuan-Lin Chen for figuring out how to correctly relax the debug info! include/ * elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32. bfd/ * reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation. (BFD_RELOC_RISCV_TPREL_S): Likewise. (BFD_RELOC_RISCV_RELAX): Likewise. (BFD_RELOC_RISCV_CFA): Likewise. (BFD_RELOC_RISCV_SUB6): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET8): Likewise. (BFD_RELOC_RISCV_SET16): Likewise. (BFD_RELOC_RISCV_SET32): Likewise. * elfnn-riscv.c (perform_relocation): Handle the new relocations. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Likewise. (howto_table): Likewise. (riscv_reloc_map): Likewise. (relax_func_t): New type. (_bfd_riscv_relax_call): Add reserve_size argument, which controls the maximal offset pessimism. Correct type of max_alignment. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_tls_le): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_section): Compute the required reserve size when relocating and use it to when calling relax_func. * bfd-in2.h: Regenerate. * libbfd.h: Likewise. gas/ * config/tc-riscv.c (riscv_set_options): Add relax. (riscv_opts): Likewise. (s_riscv_option): Add relax and norelax. (riscv_apply_const_reloc): New function. (append_insn): Move constant relocation handling to riscv_apply_const_reloc. (md_pcrel_from): Likewise. (parse_relocation): Skip BFD_RELOC_UNUSED. (md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6, BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA. (md_apply_fix): Likewise. (riscv_pre_output_hook): New function. * config/tc-riscv.h (md_pre_output_hook): Define. (riscv_pre_output_hook): Declare. (DWARF_CIE_DATA_ALIGNMENT): Always -4. |
||
|
Maciej W. Rozycki
|
5e7fc731f8 |
MIPS/opcodes: Also set disassembler's ASE flags from ELF structures
Respect any ASE flags recorded in ELF file structures for the purpose of selecting instructions to be disassembled, preventing code from being hex-dumped even though having been clearly indicated as valid at the assembly time. Use date from the MIPS ABI flags structure if present, and otherwise there may be an MDMX ASE flag set in the ELF file header. For backwards compatibility only set extra flags and do not clear any, preserving all previously set by the architecture selected to be disassembled for. include/ * elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct typedef as `elf_internal_abiflags_v0'. bfd/ * bfd-in.h (elf_internal_abiflags_v0): New struct declaration. (bfd_mips_elf_get_abiflags): New prototype. * elfxx-mips.c (bfd_mips_elf_get_abiflags): New function. * bfd-in2.h: Regenerate. opcodes/ * mips-dis.c (mips_convert_abiflags_ases): New function. (set_default_mips_dis_options): Also infer ASE flags from ELF file structures. binutils/ * testsuite/binutils-all/mips/mips-ase-1.d: New test. * testsuite/binutils-all/mips/mips-ase-2.d: New test. * testsuite/binutils-all/mips/mips-ase-3.d: New test. * testsuite/binutils-all/mips/mips-ase-1.s: New test source. * testsuite/binutils-all/mips/mips-ase-2.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests. |
||
|
Nick Clifton
|
e23eba971d |
Add support for RISC-V architecture.
bfd * Makefile.am: Add entries for riscv32-elf and riscv64-elf. * config.bdf: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * archures.c: Add bfd_riscv_arch. * reloc.c: Add riscv relocs. * targets.c: Add riscv_elf32_vec and riscv_elf64_vec. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf-bfd.h: Add RISCV_ELF_DATA to enum elf_target_id. * elfnn-riscv.c: New file. * elfxx-riscv.c: New file. * elfxx-riscv.h: New file. binutils* readelf.c (guess_is_rela): Add EM_RISCV. (get_machine_name): Likewise. (dump_relocations): Add support for riscv relocations. (get_machine_flags): Add support for riscv flags. (is_32bit_abs_reloc): Add R_RISCV_32. (is_64bit_abs_reloc): Add R_RISCV_64. (is_none_reloc): Add R_RISCV_NONE. * testsuite/binutils-all/objdump.exp (cpus_expected): Add riscv. Expect the debug_ranges test to fail. gas * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this architecture. * configure.in: Define a default architecture. * configure: Regenerate. * configure.tgt: Add entries for riscv. * doc/as.texinfo: Likewise. * testsuite/gas/all/gas.exp: Expect the redef tests to fail. * testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail. * config/tc-riscv.c: New file. * config/tc-riscv.h: New file. * doc/c-riscv.texi: New file. * testsuite/gas/riscv: New directory. * testsuite/gas/riscv/riscv.exp: New file. * testsuite/gas/riscv/t_insns.d: New file. * testsuite/gas/riscv/t_insns.s: New file. ld * Makefile.am: Add riscv files. * Makefile.in: Regenerate. * NEWS: Mention the support for this target. * configure.tgt: Add riscv entries. * emulparams/elf32lriscv-defs.sh: New file. * emulparams/elf32lriscv.sh: New file. * emulparams/elf64lriscv-defs.sh: New file. * emulparams/elf64lriscv.sh: New file. * emultempl/riscvelf.em: New file. opcodes * configure.ac: Add entry for bfd_riscv_arch. * configure: Regenerate. * disassemble.c (disassembler): Add support for riscv. (disassembler_usage): Likewise. * riscv-dis.c: New file. * riscv-opc.c: New file. include * dis-asm.h: Add prototypes for print_insn_riscv and print_riscv_disassembler_options. * elf/riscv.h: New file. * opcode/riscv-opc.h: New file. * opcode/riscv.h: New file. |
||
|
Nick Clifton
|
6d91379408 |
Update list of ELF machine numbers.
include * elf/common.h (DT_SYMTAB_SHNDX): Define. (EM_CLOUDSHIELD, EM_COREA_1ST, EM_COREA_2ND, EM_OPEN8): Define. (EM_VIDEOCORE5, EM_56800EX, EM_BA1, EM_BA2, EM_XCORE): Define. (EM_MCHP_PIC, EM_KM32, EM_KMX32, EM_KMX16, EM_KMX8): Define. (EM_KVARC, EM_CDP, EM_COGE, EM_COOL, EM_NORC): Define. (EM_CSR_KALIMBA, EM_Z80, EM_AMDGPU, EM_RISCV): Define. (ELFOSABI_OPENVOS): Define. (GRP_MASKOS, GRP_MASKPROC): Define. binutils * readelf.c (get_dynamic_type): Add DT_SYMTAB_SHNDX. (get_machine_type): Add EM_CLOUDSHIELD, EM_COREA_1ST, EM_COREA_2ND, EM_OPEN8, EM_VIDEOCORE5, EM_56800EX, EM_BA1, EM_BA2, EM_XCORE, EM_MCHP_PIC, EM_KM32, EM_KMX32, EM_KMX16, EM_KMX8, EM_KVARC, EM_CDP, EM_COGE, EM_COOL, EM_NORC, EM_CSR_KALIMBA, EM_Z80, EM_AMDGPU, EM_RISCV. (get_osabi_name): Add ELFOSABI_CLOUDABI and ELFOSABI_OPENVS. (get_group_flags): Update to handle flags in the GRP_MASKOS and GRP_MASKPROC ranges. |
||
|
Alan Modra
|
005d79fd61 |
PowerPC .gnu.attributes
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs, makes the assembler warn about undefined tag values, and removes similar warnings from the linker. I think it is better to not warn in the linker about undefined tag values as future extensions to the tags then won't result in likely bogus warnings. This is consistent with the fact that an older linker won't warn on an entirely new tag. include/ * elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment. bfd/ * elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare. * elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function. (ppc_elf_merge_obj_attributes): Use it. Don't copy first file attributes, merge them. Don't warn about undefined tag bits, or copy unknown values to output. * elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call _bfd_elf_ppc_merge_fp_attributes. binutils/ * readelf.c (display_power_gnu_attribute): Catch truncated section for all powerpc attributes. Display long double ABI. Don't capitalize words, except for names. Show known bits of tag values when some unknown bits are present. Whitespace fixes. gas/ * config/tc-ppc.c (ppc_elf_gnu_attribute): New function. (md_pseudo_table <ELF>): Handle "gnu_attribute". ld/ * testsuite/ld-powerpc/attr-gnu-4-4.s: Delete. * testsuite/ld-powerpc/attr-gnu-4-14.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-24.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-34.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-41.d: Delete. * testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning. * testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output. * testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise. * testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise. * testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise. * testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests. |
||
Cupertino Miranda
|
a87aa054a6 |
Fixes to legacy ARC relocations.
Added support for ARC_SDA_12 reloc. Fixed ARC_N32_ME. Added ME (middle-endian) to ARC_SDA_12 reloc. bfd/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> * reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12 relocation. * bfd-in2.h: Regenerated from the previous changes. * libbfd.h: Regenerated from the previous changes. include/ChangeLog: Cupertino Miranda <cmiranda@synopsys.com> * elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12, SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations. * opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation. |
||
Thomas Preud'homme
|
4ba2ef8fbe |
2016-08-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/ * elf32-arm.c (CMSE_PREFIX): Define macro. (elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence. (cmse_branch_thumb_only): Declare stub. (struct elf32_arm_link_hash_table): Define cmse_stub_sec field. (elf32_arm_get_plt_info): Add globals parameter. Use it to return FALSE if there is no PLT. (arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature. (elf32_arm_final_link_relocate): Likewise. (elf32_arm_gc_sweep_hook): Likewise. (elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M secure entry functions. (arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only. (arm_dedicated_stub_output_section_required): Change to a switch case and add a case for arm_stub_cmse_branch_thumb_only. (arm_dedicated_stub_output_section_required_alignment): Likewise. (arm_stub_dedicated_output_section_name): Likewise. (arm_stub_dedicated_input_section_ptr): Likewise and remove ATTRIBUTE_UNUSED for htab parameter. (arm_stub_required_alignment): Likewise. (arm_stub_sym_claimed): Likewise. (arm_dedicated_stub_section_padding): Likewise. (cmse_scan): New function. (elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets. Set stub_changed to TRUE if such veneers were created. (elf32_arm_swap_symbol_in): Add detection code for CMSE special symbols. include/ * arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro. (ARM_SET_SYM_CMSE_SPCL): Likewise. ld/ * ld.texinfo (Placement of SG veneers): New concept entry. * testsuite/ld-arm/arm-elf.exp (Secure gateway veneers: no .gnu.sgstubs section): New test. (Secure gateway veneers: wrong entry functions): Likewise. (Secure gateway veneers (ARMv8-M Baseline)): Likewise. (Secure gateway veneers (ARMv8-M Mainline)): Likewise. * testsuite/ld-arm/cmse-veneers.s: New file. * testsuite/ld-arm/cmse-veneers.d: Likewise. * testsuite/ld-arm/cmse-veneers.rd: Likewise. * testsuite/ld-arm/cmse-veneers.sd: Likewise. * testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise. * testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise. |
||
|
Claudiu Zissulescu
|
fa1c017017 |
[ARC] Fix/improve small data support.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the __SDATA_BEGIN__ to take advantage of the signed 9-bit field of the load/store instructions. include/ 2016-07-08 Claudiu Zissulescu <claziss@synopsys.com> * elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation. ld/ 2016-07-08 Claudiu Zissulescu <claziss@synopsys.com> * emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset. * testsuite/ld-arc/sda-relocs.dd: New file. * testsuite/ld-arc/sda-relocs.ld: Likewise. * testsuite/ld-arc/sda-relocs.rd: Likewise. * testsuite/ld-arc/sda-relocs.s: Likewise. * testsuite/ld-arc/arc.exp: Add SDA tests. |
||
|
Cupertino Miranda
|
08759e0fc8 |
Fixes done to TLS.
TLS relocations did not support multiple TLS modes for the same
symbol in a single object file.
Refactored how GOT and TLS is implemented. Removed code duplications between
local and global symbols conditioning.
bfd/ChangeLog:
2016-06-14 Cupertino Miranda <cmiranda@synopsys.com>
* arc-got.h: Moved got related structures from elf32-arc.c to
this file. More precisely, tls_type_e, tls_got_entries, got_entry.
* (arc_get_local_got_ents,
got_entry_for_type,
new_got_entry_to_list,
tls_type_for_reloc,
symbol_has_entry_of_type,
get_got_entry_list_for_symbol,
arc_got_entry_type_for_reloc,
ADD_SYMBOL_REF_SEC_AND_RELOC,
arc_fill_got_info_for_reloc,
relocate_fix_got_relocs_for_got_info,
create_got_dynrelocs_for_single_entry,
create_got_dynrelocs_for_got_info): Added to file.
* elf32-arc.c: Removed GOT & TLS related structs and functions to
arc-got.h.
Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>
|
||
Andre Vieria
|
f0728ee368 |
[ARM] Change noread to purecode.
bfd/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* bfd-in2.h (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
* elf32-arm.c (elf32_arm_post_process_headers): Rename SEC_ELF_NOREAD
to SEC_ELF_NOREAD.
(elf32_arm_fake_sections): Likewise.
(elf_32_arm_section_flags): Likewise.
(elf_32_arm_lookup_section_flags): Likewise.
* section.c (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
binutils/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* objdump.c (dump_section_header): Rename SEC_ELF_NOREAD
to SEC_ELF_NOREAD.
* readelf.c (get_elf_section_flags): Rename ARM_NOREAD to
ARM_PURECODE and SHF_ARM_NOREAD to SHF_ARM_PURECODE.
(process_section_headers): Rename noread to purecode.
* section.c (SEC_ELF_NOREAD): Rename to ...
(SEC_ELF_PURECODE): ... this.
include/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* elf/arm.h (SHF_ARM_NOREAD): Rename to ...
(SHF_ARM_PURECODE): ... this.
ld/ChangeLog
2016-07-05 Andre Vieria <andre.simoesdiasvieira@arm.com>
* testsuite/ld-arm/arm_noread.ld: Renamed to ...
testsuite/ld-arm/arm_purecode.ld: ... this, and replaced
all noread's by purecode.
|
||
|
Maciej W. Rozycki
|
c9775dde32 |
MIPS16: Add R_MIPS16_PC16_S1 branch relocation support
For R_MIPS16_PC16_S1 the calculation is `(sign_extend(A) + S - P) >> 1' and the usual MIPS16 bit shuffling applies to relocated field handling, as per the encoding of the branch target in the extended form of the MIPS16 B, BEQZ, BNEZ, BTEQZ and BTNEZ instructions. include/ * elf/mips.h (R_MIPS16_PC16_S1): New relocation. bfd/ * elf32-mips.c (elf_mips16_howto_table_rel): Add R_MIPS16_PC16_S1. (mips16_reloc_map): Likewise. * elf64-mips.c (mips16_elf64_howto_table_rel): Likewise. (mips16_elf64_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfn32-mips.c (elf_mips16_howto_table_rel): Likewise. (elf_mips16_howto_table_rela): Likewise. (mips16_reloc_map): Likewise. * elfxx-mips.c (mips16_branch_reloc_p): New function. (mips16_reloc_p): Handle R_MIPS16_PC16_S1. (b_reloc_p): Likewise. (mips_elf_calculate_relocation): Likewise. (_bfd_mips_elf_check_relocs): Likewise. * reloc.c (BFD_RELOC_MIPS16_16_PCREL_S1): New relocation. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-mips.c (mips16_reloc_p): Handle BFD_RELOC_MIPS16_16_PCREL_S1. (b_reloc_p): Likewise. (limited_pcrel_reloc_p): Likewise. (md_pcrel_from): Likewise. (md_apply_fix): Likewise. (tc_gen_reloc): Likewise. (md_convert_frag): Likewise. (mips_fix_adjustable): Update comment. * testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-2.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-addend-3.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-absolute.d: Remove error output, add dump patterns. * testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file. * testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-3.l: Remove file. * testsuite/gas/mips/mips16-branch-absolute.l: Remove file. * testsuite/gas/mips/mips16-branch-addend-2.s: Add padding. * testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid implicit instruction padding, avoid MIPS16 JR->JRC conversion. * testsuite/gas/mips/branch-weak-6.d: New test. * testsuite/gas/mips/branch-weak-7.d: New test. * testsuite/gas/mips/mips.exp: Run the new tests. ld/ * testsuite/ld-mips-elf/mips16-branch-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-3.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-2.d: New test. * testsuite/ld-mips-elf/mips16-branch-addend-3.d: New test. * testsuite/ld-mips-elf/mips16-branch.s: New test source. * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. |
||
Trevor Saunders
|
7c2c4aa12f |
xtensa: prototype xtensa_make_property_section in elf/xtensa.h
There's no reason to have multiple prototypes for the same function. include/ChangeLog: 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf/xtensa.h (xtensa_make_property_section): New prototype. gas/ChangeLog: 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * config/tc-xtensa.c (xtensa_make_property_section): Remove prototype. bfd/ChangeLog: 2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf32-xtensa.c (xtensa_make_property_section): Remove prototype. |
||
John Baldwin
|
b00f86d072 |
Add constants for FreeBSD-specific auxiliary vector entry types.
include/ChangeLog: * elf/common.h (AT_FREEBSD_EXECPATH, AT_FREEBSD_CANARY) (AT_FREEBSD_CANARYLEN, AT_FREEBSD_OSRELDATE, AT_FREEBSD_NCPUS) (AT_FREEBSD_PAGESIZES, AT_FREEBSD_PAGESIZESLEN) (AT_FREEBSD_TIMEKEEP, AT_FREEBSD_STACKPROT): Define. |
||
|
Trevor Saunders
|
6b4778968b |
addmore extern C
opcodes/ChangeLog: 2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * arc-ext.h: Wrap in extern C. include/ChangeLog: 2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf/dlx.h: Wrap in extern C. * elf/xtensa.h: Likewise. * opcode/arc.h: Likewise. |
||
Graham Markall
|
bdd582dbf1 |
Arc assembler: Convert nps400 from a machine type to an extension.
gas * config/tc-arc.c (check_cpu_feature, md_parse_option): Add nps400 option and feature. Add check for nps400 feature. Refactor existing checks to check subclass before feature enablement. (md_show_usage): Document flags for NPS-400 and add some other undocumented flags. (cpu_type): Remove nps400 CPU type entry (check_zol): Remove bfd_mach_arc_nps400 case. (md_show_usage): Add help on -mcpu=nps400. (cpu_types): Add entry for nps400 as arc700 plus nps400 extension set. * doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and -fpuda flags. Document -mcpu=nps400. * testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change expected flags to match ARC700 instead of NPS400. * testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400. * testsuite/gas/arc/nps-400-2.d: Likewise. * testsuite/gas/arc/nps-400-3.d: Likewise. * testsuite/gas/arc/nps-400-4.d: Likewise. * testsuite/gas/arc/nps-400-5.d: Likewise. * testsuite/gas/arc/nps-400-6.d: Likewise. * testsuite/gas/arc/nps-400-7.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to avoid clash with cbba instruction. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using -mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags. binutils* readelf.c (decode_ARC_machine_flags): Remove E_ARC_MACH_NPS400 case. ld * testsuite/ld-arc/nps-1a.d: Use -mcpu=arc700 -mnps400. * testsuite/ld-arc/nps-1b.d: Likewise. include * opcode/arc.h: Add nps400 extension and instruction subclass. Remove ARC_OPCODE_NPS400 * elf/arc.h: Remove E_ARC_MACH_NPS400 opcodes * arc-dis.c (arc_insn_length): Add comment on instruction length. Use same method for determining instruction length on ARC700 and NPS-400. (arc_insn_length, print_insn_arc): Remove bfd_mach_arc_nps400. * arc-nps400-tbl.h: Make all nps400 instructions ARC700 instructions with the NPS400 subclass. * arc-opc.c: Likewise. bfd * archures.c: Remove bfd_mach_arc_nps400. * bfd-in2.h: Likewise. * cpu-arc.c (arch_info_struct): Likewise. * elf32-arc.c (arc_elf_object_p, arc_elf_final_write_processing): Likewise. |
||
|
Alan Modra
|
14b57c7c6a |
PowerPC VLE
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
|
||
|
Trevor Saunders
|
1fe0971e41 |
add more extern C
opcodes/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * nds32-asm.h: Add extern "C". * sh-opc.h: Likewise. bfd/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf32-hppa.h: Add extern "C". * elf32-nds32.h: Likewise. * elf32-tic6x.h: Likewise. include/ChangeLog: 2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * elf/mips.h: Likewise. * elf/sh.h: Likewise. * opcode/d10v.h: Likewise. * opcode/d30v.h: Likewise. * opcode/ia64.h: Likewise. * opcode/mips.h: Likewise. * opcode/ppc.h: Likewise. * opcode/sparc.h: Likewise. * opcode/tic6x.h: Likewise. * opcode/v850.h: Likewise. |
||
Matthew Fortune
|
8f4f9071ad |
Add MIPS32 DSPr3 support.
bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3. |
||
|
Thomas Preud'homme
|
39d911fc3c |
Use getters/setters to access ARM branch type
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
|
||
|
Thomas Preud'homme
|
15afaa63f3 |
Add support for ARMv8-M Mainline with DSP extension
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ (elf32_arm_merge_eabi_attributes): Add merging logic for Tag_DSP_extension. binutils/ * readelf.c (display_arm_attribute): Add output for Tag_DSP_extension. (arm_attr_public_tags): Define DSP_extension attribute. gas/ * NEWS: Document ARMv8-M and ARMv8-M Security and DSP Extensions. * config/tc-arm.c (arm_ext_dsp): New feature for Thumb DSP instructions. (arm_extensions): Add dsp extension for ARMv8-M Mainline. (aeabi_set_public_attributes): Memorize the feature bits of the architecture selected for Tag_CPU_arch. Use it to set Tag_DSP_extension to 1 for ARMv8-M Mainline with DSP extension. (arm_convert_symbolic_attribute): Define Tag_DSP_extension. * testsuite/gas/arm/arch7em-bad.d: Rename to ... * testsuite/gas/arm/arch7em-bad-1.d: This. * testsuite/gas/arm/arch7em-bad-2.d: New file. * testsuite/gas/arm/arch7em-bad-3.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise. * testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise. * testsuite/gas/arm/attr-march-armv8m.main.dsp.d: Likewise. include/ * elf/arm.h (Tag_DSP_extension): Define. ld/ * testsuite/ld-arm/arm-elf.exp (EABI attribute merging 10 (DSP)): New test. * testsuite/ld-arm/attr-merge-10b-dsp.s: New file. * testsuite/ld-arm/attr-merge-10-dsp.attr: Likewise. |
||
Andrew Burgess
|
52176c676d |
arc: Fix relocation formula for ARC_NPS_CMEM16 relocation
The ME modifier was missing from the relocation formula for the ARC_NPS_CMEM16 relocation, and as such the relocation would not patch correctly on little endian targets. include/ChangeLog: * elf/arc-reloc.def (ARC_NPS_CMEM16): Add ME modifier to formula. |
||
|
Andrew Burgess
|
4b0c052e45 |
arc/nps400 : New cmem instructions and associated relocation
Add support for arc/nps400 cmem instructions, these load and store instructions are hard-wired to access "0x57f00000 + 16-bit-offset". Supporting this relocation required some additions to the arc relocation handling in the bfd library, as well as the standard changes required to add a new relocation type. There's a test of the new instructions in the assembler, and a test of the relocation in the linker. bfd/ChangeLog: * reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c: Add 'opcode/arc.h' include. (struct arc_relocation_data): Add symbol_name. (arc_special_overflow_checks): New function. (arc_do_relocation): Use arc_special_overflow_checks, reindent as required, add an extra comment. (elf_arc_relocate_section): Setup symbol_name in reloc_data. gas/ChangeLog: * testsuite/gas/arc/nps400-3.d: New file. * testsuite/gas/arc/nps400-3.s: New file. include/ChangeLog: * elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc. * opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define. ld/ChangeLog: * testsuite/ld-arc/arc.exp: New file. * testsuite/ld-arc/nps-1.s: New file. * testsuite/ld-arc/nps-1a.d: New file. * testsuite/ld-arc/nps-1b.d: New file. * testsuite/ld-arc/nps-1b.err: New file. opcodes/ChangeLog: * arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst instructions. * arc-opc.c (insert_nps_cmem_uimm16): New function. (extract_nps_cmem_uimm16): New function. (arc_operands): Add NPS_XLDST_UIMM16 operand. |
||
|
Andrew Burgess
|
8699fc3e88 |
arc: Add nps400 machine type, and assembler flag.
This commit introduces the nps400 machine type as a variant of arc. There's a new flag in the assembler to select this machine type. All other changes are just adding handling of the new machine type into the relevant places. The nps400 is an arc700 variant with some vendor specific instructions added into the instruction set. This commit does not add any of the new instructions, this is just laying the groundwork for future commits. However, in preparation for these new instructions a new opcode define for nps400 has been added to include/opcode/arc.h, this new opcode define is used in the assembler and disassembler along with the existing define for arc700 such that when assembling and disassembling for nps400 the user will have access to all arc700 instructions and all the nps400 vendor extension instructions. bfd/ChangeLog: * archures.c (bfd_mach_arc_nps400): Define. * bfd-in2.h: Regenerate. * cpu-arc.c (arch_info_struct): New entry for nps400, renumber some existing entries to make space. * elf32-arc.c (arc_elf_object_p): Add nps400 case. (arc_elf_final_write_processing): Likewise. binutils/ChangeLog: * readelf.c (decode_ARC_machine_flags): Handle nps400. gas/ChangeLog: * config/tc-arc.c (cpu_types): Add nps400 entry. (check_zol): Handle nps400. include/ChangeLog: * elf/arc.h (E_ARC_MACH_NPS400): Define. * opcode/arc.h (ARC_OPCODE_NPS400): Define. opcodes/ChangeLog: * arc-dis.c (print_insn_arc): Handle nps400. |
||
|
Andrew Burgess
|
a9522a2168 |
arc: Remove EF_ARC_CPU_GENERIC constant.
The constant EF_ARC_CPU_GENERIC is defined in the include/elf/arc.h file, and is used in a few places in binutils, however, this constant should never make it into the elf header flags; we always set a valid cpu type in the assembler, which should then be copied over during linking. There are some non-gnu arc compilers that don't write an architecture type into the e_flags field, instead leaving the field as 0, which is the EF_ARC_CPU_GENERIC value. This non-gnu compiler uses the machine type to distinguish between the old and newer arc architectures, setting the machine type to EM_ARC_COMPACT for old arc600, arc601, and arc700 architectures, while using EM_ARC_COMPACT2 for newer arcem and archs architectures. Previously when displaying the machine flags for an older EM_ARC_COMPACT machine, if the e_flags had not been filled in, then we relied on the default case statement to display the message "Generic ARCompact", while in the EM_ARC_COMPACT2 case we specifically handled EF_ARC_CPU_GENERIC to print "ARC Generic", leaving the default case to print a message about unrecognised cpu flag. After this commit EF_ARC_CPU_GENERIC has been removed, for both machine types EM_ARC_COMPACT and EM_ARC_COMPACT2 we now rely on the default case statement to handle the situation where the e_flags has not been filled in. The message displayed is now "Unknown ARCompact" (for older arc architectures) and "Unknown ARC" (for the newer architectures). The switch from "Generic" to "Unknown" in the message string is for clarity, calling the file "Generic" can give the impression that the file is compiled for a common sub-set of the architectures, and would therefore run on any type of machine (or at least any type of new or old machine depending on if the machine type is ARC or ARCv2). However, this was not what "Generic" meant, it really meant "Unknown", so that's what we now say. As part of the merging of the readelf flag reading code, I have unified the strings used in displaying the ELF ABI. This means that for older arc machines (arc600, arc601, and arc700) the string used for the original ABI, and ABIv2 have changed, the current ABIv3 remains the same. For the newer architectures (arcem and archs) the abi strings remain unchanged in all cases. bfd/ChangeLog: * elf32-arc.c (arc_elf_print_private_bfd_data): Remove use of EF_ARC_CPU_GENERIC. (arc_elf_final_write_processing): Don't bother setting cpu field in e_flags, this will have been set elsewhere. binutils/ChangeLog: * readelf.c (get_machine_flags): Move arc processing into... (decode_ARC_machine_flags): ... new function. Remove use of EF_ARC_CPU_GENERIC, change default case from "generic arc" to "unknown arc". Merged ABI printing between two machine types. gas/ChangeLog: * config/tc-arc.c (arc_select_cpu): Remove use of EF_ARC_CPU_GENERIC. include/ChangeLog: * elf/arc.h (EF_ARC_CPU_GENERIC): Delete. Update related comment. |
||
|
Andrew Burgess
|
c033458051 |
arc: Remove duplicated constant in include/elf/arc.h
In the include/elf/arc.h there are two constants that mask out the machine architecture field. One is used lots (EF_ARC_MACH_MSK), the other is used only once (EF_ARC_MACH). Remove EF_ARC_MACH. bfd/ChangeLog: * elf32-arc.c (arc_elf_final_write_processing): Switch to using EF_ARC_MACH_MSK. include/ChangeLog: * elf/arc.h (EF_ARC_MACH): Delete. (EF_ARC_MACH_MSK): Remove out of date comment. |
||
|
Claudiu Zissulescu
|
72f3b6aae7 |
[ARC] Allow non-instruction relocations within .text sections
bfd/ 2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com> Andrew Burgess <andrew.burgess@embecosm.com> * elf32-arc.c (arc_bfd_get_32): Becomes an alias for bfd_get_32. (arc_bfd_put_32): Becomes an alias for bfd_put_32. (arc_elf_howto_init): Added assert to validate relocations. (get_middle_endian_relocation): Delete. (middle_endian_convert): New function. (ME): Redefine, now does nothing. (IS_ME): New define. (arc_do_relocation): Extend the attached 'ARC_RELOC_HOWTO' definition to call middle_endian_convert. Add a new local variable and make use of this throughout. Added call to arc_bfd_get_8 and arc_bfd_put_8 for 8 bit relocations. gas/ 2016-03-08 Andrew Burgess <andrew.burgess@embecosm.com> * testsuite/gas/arc/inline-data-1.d: New file. * testsuite/gas/arc/inline-data-1.s: New file. include/ 2016-03-08 Cupertino Miranda <Cupertino.Miranda@synopsys.com> Andrew Burgess <andrew.burgess@embecosm.com> * elf/arc-reloc.def: Add a call to ME within the formula for each relocation that requires middle-endian correction. |
||
|
Alan Modra
|
24f5f69a8a |
Fix macro redefinition error on Solaris
PR 16583 * elf/common.h (AT_SUN_HWCAP): Undef before defining. |
||
|
John Baldwin
|
f4ddf30f11 |
Add support to readelf for reading FreeBSD ELF core notes.
binutils/ChangeLog: * readelf.c (get_freebsd_elfcore_note_type): New (process_note): Add support for FreeBSD core notes. include/ChangeLog: * elf/common.h (NT_FREEBSD_THRMISC): Define. (NT_FREEBSD_PROCSTAT_PROC): Define. (NT_FREEBSD_PROCSTAT_FILES): Define. (NT_FREEBSD_PROCSTAT_VMMAP): Define. (NT_FREEBSD_PROCSTAT_GROUPS): Define. (NT_FREEBSD_PROCSTAT_UMASK): Define. (NT_FREEBSD_PROCSTAT_RLIMIT): Define. (NT_FREEBSD_PROCSTAT_OSREL): Define. (NT_FREEBSD_PROCSTAT_PSSTRINGS): Define. (NT_FREEBSD_PROCSTAT_AUXV): Define. |
||
Miranda Cupertino
|
34e967a5f3 |
Add PIC and TLS support to the ARC target.
bfd/ChangeLog: * arc-plt.def: New file. * arc-plt.h: Likewise. * elf32-arc.c (elf_arc_abs_plt0_entry, elf_arc_abs_pltn_entry, elf_arcV2_abs_plt0_entry, elf_arcV2_abs_pltn_entry, elf_arc_pic_plt0_entry, elf_arc_pic_pltn_entry, elf_arcV2_pic_plt0_entry, elf_arcV2_pic_pltn_entry): Remove. (name_for_global_symbol): Added. (ADD_RELA): Helper to create dynamic relocs. (new_got_entry_to_list): Create a new got entry in linked list. (symbol_has_entry_of_type): Search for specific type of entry in list. (is_reloc_for_GOT): return FALSE for any TLS related relocs. (is_reloc_for_TLS, arc_elf_set_private_flags) (arc_elf_print_private_bfd_data, arc_elf_copy_private_bfd_data) (arc_elf_merge_private_bfd_data): New functions. (debug_arc_reloc): Cleaned debug info printing. (PDATA reloc): Changed not to perform address alignment. (reverse_me): Added. Fix for ARC_32 relocs. (arc_do_relocation): Return bfd_reloc_of when no relocation should occur. (arc_get_local_got_ents): Renamed from arc_get_local_got_offsets. Changed function to access an array of list of GOT entries instead of just an array of offsets. (elf_arc_relocate_section): Added support for PIC and TLS related relocations. (elf_arc_check_relocs): Likewise. (elf_arc_adjust_dynamic_symbol, elf_arc_finish_dynamic_symbol, (elf_arc_finish_dynamic_sections): Likewise (arc_create_dynamic_sections): Modified conditions to create dynamic sections. (ADD_SYMBOL_REF_SEC_AND_RELOC): New macro. (plt_do_relocs_for_symbol, relocate_plt_for_symbol) (relocate_plt_for_entry): Changed to support new way to define PLT related code. (add_symbol_to_plt): Likewise. (arc_elf_link_hash_table_create): New function. include/ChangeLog: * elf/arc-reloc.def (ARC_32, ARC_GOTPC, ARC_TLS_GD_GOT) (ARC_TLS_IE_GOT, ARC_TLS_DTPOFF, ARC_TLS_DTPOFF_S9, ARC_TLS_LE_S9) (ARC_TLS_LE_32): Fixed formula. (ARC_TLS_GD_LD): Use new special function. * opcode/arc-func.h: Changed all the replacement functions to clear the patching bits before doing an or it with the value argument. |
||
|
Alan Modra
|
6f2750feaf | Copyright update for binutils | ||
|
Alan Modra
|
4120fa118f | binutils ChangeLog rotation | ||
|
Alan Modra
|
331e61312e | Fix assorted ChangeLog errors | ||
|
Thomas Preud'homme
|
ff8646eef8 |
Add assembler support for ARMv8-M Baseline
2015-12-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
(tag_cpu_arch_combine): Adjust comment in v4t_plus_v6_m with regards
to merging with ARMv8-M Baseline.
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Add ARMv8-M Baseline Tag_CPU_arch
value.
gas/
* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
shared between ARMv6T2 and ARMv8-M.
(move_or_literal_pool): Check mov.w/mvn and movw availability against
arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
arm_arch_t2.
(do_t_branch): Error out for wide conditional branch instructions if
targetting ARMv8-M Baseline.
(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
in ARMv8-M Baseline.
(wide_insn_ok): New function.
(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
adapt error message for unsupported wide instruction to ARMv8-M
Baseline.
(insns): Reorganize instructions shared by ARMv8-M Baseline and
ARMv6t2 architecture.
(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
marvell-whitney cores.
(arm_archs): Define armv8-m.base architecture.
(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
ARMv8-M Mainline. Set Tag_DIV_use for ARMv8-M Baseline as well.
gas/testsuite/
* gas/arm/archv8m-base.d: New file.
* gas/arm/attr-march-armv8m.base.d: Likewise.
* gas/arm/armv8m.base-idiv.d: Likewise.
* gas/arm/any-armv8m.d: Adapt to deal with ARMv8-M Baseline.
include/elf/
* arm.h (TAG_CPU_ARCH_V8M_BASE): Declare.
include/opcode/
* arm.h (ARM_EXT2_V6T2_V8M): New extension bit.
(ARM_AEXT2_V8A): New architecture extension bitfield.
(ARM_AEXT2_V8_1A): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_AEXT_V8M_BASE): New architecture extension bitfield.
(ARM_AEXT2_V8M): Add extension bit ARM_EXT2_V6T2_V8M.
(ARM_ARCH_V6T2): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield.
(ARM_ARCH_V6KT2): Likewise.
(ARM_ARCH_V6ZT2): Likewise.
(ARM_ARCH_V6KZT2): Likewise.
(ARM_ARCH_V7): Likewise.
(ARM_ARCH_V7A): Likewise.
(ARM_ARCH_V7VE): Likewise.
(ARM_ARCH_V7R): Likewise.
(ARM_ARCH_V7M): Likewise.
(ARM_ARCH_V7EM): Likewise.
(ARM_ARCH_V8A): Likewise.
(ARM_ARCH_V8M_BASE): New architecture bitfield.
(ARM_ARCH_THUMB2): Include instructions shared by ARMv6t2 and ARMv8-M.
(ARM_ARCH_V7A_SEC): Use ARM_EXT2_V6T2_V8M for the second extension
bitfield and reindent.
(ARM_ARCH_V7A_MP_SEC): Likewise.
(ARM_ARCH_V7R_IDIV): Likewise.
(ARM_ARCH_V8A_FP): Use ARM_AEXT2_V8A instead of ARM_EXT2_ATOMICS.
(ARM_ARCH_V8A_SIMD): Likewise.
(ARM_ARCH_V8A_CRYPTOV1): Likewise.
opcodes/
* arm-dis.c (arm_opcodes): Guard movw, movt cbz, cbnz, clrex, ldrex,
ldrexb, ldrexh, strex, strexb, strexh shared by ARMv6T2 and ARMv8-M by
ARM_EXT2_V6T2_V8M instead of ARM_EXT_V6T2.
|