I noticed that gdb.multi/multi-arch.exp wasn't passing with
extended-remote GDBserver with my pending multi-process+multi-arch
series anymore on current mainline, while it used to pass before:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.multi/ma-hangout
Process /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.multi/ma-hangout created; pid = 32067
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
Cannot insert breakpoint -1.
Temporarily disabling shared library breakpoints:
breakpoint #-1
(gdb) FAIL: gdb.multi/multi-arch.exp: starting inferior 2
Investigating manually, I found an easy way to reproduce. You just
need breakpoints on distinct inferiors, and a way to have GDB install
them in one go:
(gdb) set breakpoint always-inserted on
(gdb) info breakpoints
Num Type Disp Enb Address What
2 breakpoint del n <MULTIPLE>
2.1 y 0x00000000004005c2 in main at ../../../src/gdb/testsuite/gdb.multi/hello.c:40 inf 1
2.2 y 0x08048475 in main at ../../../src/gdb/testsuite/gdb.multi/hangout.c:22 inf 2
(gdb) enable 2
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
And turning on remote debugging, we see:
(gdb) set debug remote 1
(gdb) disable 2
(gdb) enable 2
Sending packet: $Z0,4005c2,1#71...Packet received: E01
Sending packet: $Z0,8048475,1#87...Packet received: OK
Warning:
Cannot insert breakpoint 2.
Error accessing memory address 0x4005c2: Unknown error -1.
Notice that each of those Z0 breakpoints should be set in different
processes. However, no Hg packet to select a process has been sent in
between, so GDBserver tries to plant both on the same process that
happens to be current. The first Z0 then not so surprisingly fails.
IOW, the blame is on GDB, for telling GDBserver to plant both
breakpoints in the same process.
remote.c has a lazy scheme where it keeps a local cache of the
remote's selected general thread, and delays updating it on the remote
side until necessary (memory/register reads/writes, etc.). This is
done to reduce RSP traffic. The bug is that the Zx breakpoint
insert/remove methods weren't committing the selected thread/process
back to the remote side:
Breakpoint 3, remote_insert_breakpoint (gdbarch=0x1383ae0, bp_tgt=0x140c2b0) at ../../src/gdb/remote.c:8148
8148 if (remote_protocol_packets[PACKET_Z0].support != PACKET_DISABLE)
(top-gdb) p inferior_ptid
$3 = {pid = 3670, lwp = 0, tid = 3670}
(top-gdb) p general_thread
$4 = {pid = 3671, lwp = 0, tid = 3671}
IOW, a call to set_general_process is missing.
I did some auditing over remote.c, and added calls to all places I
found missing it.
This only used to work by chance before. breakpoint.c switches to a
thread of the target process before installing a breakpoint location.
That calls switch_to_thread. Before:
2012-07-27 Yao Qi <yao@codesourcery.com>
* thread.c (switch_to_thread): Don't call registers_changed.
that caused the register caches to all be flushed and refetched before
installing the breakpoint location. Given fetching registers commits
the remote general thread (with Hg), masking out the latent bug.
Tested on x86_64 Fedora 17 with GDBserver.
gdb/
2013-05-29 Pedro Alves <palves@redhat.com>
* remote.c (remote_insert_breakpoint, remote_remove_breakpoint)
(remote_insert_watchpoint, remote_remove_watchpoint)
(remote_insert_hw_breakpoint, remote_remove_hw_breakpoint)
(remote_verify_memory, compare_sections_command)
(remote_search_memory): Set the general process/thread on the
remote side.
This patch teaches GDB to take advantage of target-assisted range
stepping. It adds a new 'r ADDR1,ADDR2' action to vCont (vCont;r),
meaning, "step once, and keep stepping as long as the thread is in the
[ADDR1,ADDR2) range".
Rationale:
When user issues the "step" command on the following line of source,
a = b + c + d * e - a;
GDB single-steps every single instruction until the program reaches a
new different line. E.g., on x86_64, that line compiles to:
0x08048434 <+65>: mov 0x1c(%esp),%eax
0x08048438 <+69>: mov 0x30(%esp),%edx
0x0804843c <+73>: add %eax,%edx
0x0804843e <+75>: mov 0x18(%esp),%eax
0x08048442 <+79>: imul 0x2c(%esp),%eax
0x08048447 <+84>: add %edx,%eax
0x08048449 <+86>: sub 0x34(%esp),%eax
0x0804844d <+90>: mov %eax,0x34(%esp)
0x08048451 <+94>: mov 0x1c(%esp),%eax
and the following is the RSP traffic between GDB and GDBserver:
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3c840408;thread:p2e13.2e13;core:1;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:3e840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:42840408;thread:p2e13.2e13;core:2;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:47840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:49840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:4d840408;thread:p2e13.2e13;core:0;
--> vCont;s:p2e13.2e13;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2e13.2e13;core:0;
IOW, a lot of roundtrips between GDB and GDBserver.
If we add a new command to the RSP, meaning "keep stepping and don't
report a stop until the program goes out of the [0x08048434,
0x08048451) address range", then the RSP traffic can be reduced down
to:
--> vCont;r8048434,8048451:p2db0.2db0;c
<-- T0505:68efffbf;04:30efffbf;08:51840408;thread:p2db0.2db0;core:1;
As number of packets is reduced dramatically, the performance of
stepping source lines is much improved.
In case something is wrong with range stepping on the stub side, the
debug info or even gdb, this adds a "set/show range-stepping" command
to be able to turn range stepping off.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_control_state) <may_range_step>: New
field.
* infcmd.c (step_once, until_next_command): Enable range stepping.
* infrun.c (displaced_step_prepare): Disable range stepping.
(resume): Disable range stepping if stepping over a breakpoint or
we have software watchpoints. If range stepping is enabled,
assert the thread is in the stepping range.
(clear_proceed_status_thread): Clear may_range_step.
(handle_inferior_event): Disable range stepping as soon as we know
the thread that hit the event. Re-enable it whenever we're going
to step with a step range.
* remote.c (struct vCont_action_support) <r>: New field.
(use_range_stepping): New global.
(remote_vcont_probe): Handle 'r' action.
(append_resumption): Append an 'r' action if the thread may range
step.
(show_range_stepping): New function.
(set_range_stepping): New function.
(_initialize_remote): Call add_setshow_boolean_cmd to register the
'set range-stepping' and 'show range-stepping' commands.
* NEWS: Mention range stepping, the new vCont;r action, and the
new "set/show range-stepping" commands.
gdb/doc/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.texinfo (Packets): Document 'vCont;r'.
(Continuing and Stepping): Document target-assisted range
stepping, and the 'set range-stepping' and 'show range-stepping'
commands.
Convert the 'support_vCont_t' int field to a struct, in preparation
for adding more fields to it.
gdb/
2013-05-23 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* remote.c (struct vCont_action_support): New struct.
(struct remote_state) <support_vCont_t>: Remove field.
<vCont_actions_support>: New field.
(remote_vcont_probe, remote_stop_ns): Update.
I noticed:
(gdb) show remote traceframe-info-packet
Support for the `qXfer:trace-frame-info:read' packet is auto-detected, currently unknown.
^^^^^^^^^^^
The packet is actually qXfer:traceframe-info:read.
gdb/
2013-05-10 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Fix spelling of
qXfer:traceframe-info:read packet in packet config command.
In the function remote_trace_set_readonly_regions in gdb/remote.c, the
local variable 'offset' does not account for "QTro" at the start of
the packet with the result that if there are any read-only regions,
the packet is sent -- but without the "QTro" -- causing the remote
stub to report that the packet is unsupported:
Sending packet: $:0000000000400200,(...),00000000004560a4#ab...Packet received:
vs the expected:
Sending packet: $QTro:0000000000400200,(...),00000000004560a4#31...Packet received: OK
We don't see the problem when testing with GDBserver, as that supports
qXfer:trace-frame-info:read, meaning GDBserver never needs to read
from the read-only sections directly itself. This commit adds a test
that explicitly disables qXfer:trace-frame-info:read.
gdb/
2013-05-10 David Taylor <dtaylor@emc.com>
PR remote/15455
* remote.c (remote_trace_set_readonly_regions): Do not overwrite
"QTro" at start of packet.
gdb/testsuite/
2013-05-10 Pedro Alves <palves@redhat.com>
PR remote/15455
* gdb.trace/qtro.c: New file.
* gdb.trace/qtro.exp: New file.
While the RSP is largely ASCII based (hence the packet buffer type is
char *), at places we pass around 8-bit binary packets in that buffer.
Functions like hex2bin or remote_escape_output conceptually are
handling binary buffers, so I left them as working with gdb_byte, and
added casts where necessary. Whether these are host bytes or target
bytes is blurry at present, so this is largely a matter of taste.
Switching some of these functions to take "char *" or "void *" would
be equally good.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* remote.c (remote_write_bytes_aux, compare_sections_command)
(remote_read_qxfer)
(remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
(remote_hostio_readlink, remote_bfd_iovec_pread)
(remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
binary buffer, and char when buffer is used as string.
* tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
(trace_save, tfile_open, traceframe_walk_blocks)
(tfile_fetch_registers): Likewise.
-Wpointer-sign catches all these cases across the codebase that should
be using gdb_byte for raw target bytes. I think these are all
obvious, hence I've collapsed into a single patch.
gdb/
2013-04-19 Pedro Alves <palves@redhat.com>
* aarch64-tdep.c (aarch64_default_breakpoint): Change type to
gdb_byte[].
(aarch64_breakpoint_from_pc): Change return type to gdb_byte *.
* ada-lang.c (ada_value_assign): Use gdb_byte.
* alphanbsd-tdep.c (sigtramp_retcode): Change type to gdb_byte[].
(alphanbsd_sigtramp_offset): Use gdb_byte.
* arm-linux-tdep.c (arm_linux_arm_le_breakpoint)
(arm_linux_arm_be_breakpoint, eabi_linux_arm_le_breakpoint)
(eabi_linux_arm_be_breakpoint, arm_linux_thumb_be_breakpoint)
(arm_linux_thumb_le_breakpoint, arm_linux_thumb2_be_breakpoint)
(arm_linux_thumb2_le_breakpoint): Change type to gdb_byte[].
* arm-tdep.c (arm_stub_unwind_sniffer)
(arm_displaced_init_closure): Use gdb_byte.
(arm_default_arm_le_breakpoint, arm_default_arm_be_breakpoint)
(arm_default_thumb_le_breakpoint)
(arm_default_thumb_be_breakpoint): Change type to gdb_byte[].
* arm-tdep.h (struct gdbarch_tdep) <arm_breakpoint,
thumb_breakpoint, thumb2_breakpoint>: Change type to gdb_byte *.
* arm-wince-tdep.c (arm_wince_le_breakpoint)
(arm_wince_thumb_le_breakpoint): Change type to gdb_byte[].
* armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint)
(arm_nbsd_arm_be_breakpoint, arm_nbsd_thumb_le_breakpoint)
(arm_nbsd_thumb_be_breakpoint): Change type to gdb_byte[].
* armobsd-tdep.c (arm_obsd_thumb_le_breakpoint)
(arm_obsd_thumb_be_breakpoint): Change type to gdb_byte[].
* cris-tdep.c (push_stack_item, cris_push_dummy_call)
(cris_store_return_value, cris_extract_return_value): Use
gdb_byte.
(constraint): Change type of parameter to char * from signed
char*. Use gdb_byte.
* dwarf2loc.c (read_pieced_value, write_pieced_value): Change type
of local buffer to gdb_byte *.
* dwarf2read.c (read_index_from_section): Use gdb_byte.
(create_dwp_hash_table): Change type of locals to gdb_byte *.
(add_address_entry): Change type of local buffer to gdb_byte[].
* frv-tdep.c (frv_adjust_breakpoint_address, find_func_descr)
(frv_push_dummy_call): Use gdb_byte.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code)
(hppa_hpux_supply_ss_fpblock, hppa_hpux_supply_ss_wide)
(hppa_hpux_supply_save_state): Use gdb_byte.
* hppa-tdep.c (hppa32_push_dummy_call)
(hppa64_convert_code_addr_to_fptr): Use gdb_byte.
* ia64-tdep.c (extract_bit_field, replace_bit_field)
(slotN_contents, replace_slotN_contents): Change type of parameter
to gdb_byte *.
(fetch_instruction, ia64_pseudo_register_write)
(ia64_register_to_value, ia64_value_to_register)
(ia64_extract_return_value, ia64_store_return_value)
(ia64_push_dummy_call): Use gdb_byte.
* m32c-tdep.c (m32c_return_value): Remove cast.
* m68hc11-tdep.c (m68hc11_pseudo_register_write)
(m68hc11_push_dummy_call, m68hc11_store_return_value): Use
gdb_byte.
* mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Use gdb_byte.
* mn10300-tdep.c (mn10300_store_return_value)
(mn10300_breakpoint_from_pc, mn10300_push_dummy_call): Use
gdb_byte.
* moxie-tdep.c (moxie_process_readu): Use gdb_byte.
(moxie_process_record): Remove casts.
* ppc-ravenscar-thread.c (supply_register_at_address)
(ppc_ravenscar_generic_store_registers): Use gdb_byte.
* ravenscar-thread.c (get_running_thread_id): Use gdb_byte.
* remote-m32r-sdi.c (m32r_fetch_register): Use gdb_byte.
* remote-mips.c (mips_xfer_memory): Use gdb_byte.
* remote.c (compare_sections_command): Use gdb_byte.
* score-tdep.c (score7_free_memblock): Change type of parameter to
gdb_byte *.
* sh-tdep.c (sh_justify_value_in_reg): Change return type to
gdb_byte *. Use gdb_byte.
(sh_push_dummy_call_fpu): Use gdb_byte.
(sh_extract_return_value_nofpu, sh_extract_return_value_fpu)
(sh_store_return_value_nofpu, sh_store_return_value_fpu)
(sh_register_convert_to_virtual, sh_register_convert_to_raw):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh_pseudo_register_read, sh_pseudo_register_write): Use gdb_byte.
* sh64-tdep.c (sh64_push_dummy_call): Use gdb_byte.
(sh64_store_return_value, sh64_register_convert_to_virtual):
Change parameter type to 'gdb_byte *'. Use gdb_byte.
(sh64_pseudo_register_write): Use gdb_byte.
* solib-darwin.c (darwin_current_sos): Add casts to 'gdb_byte *'.
* solib-irix.c (fetch_lm_info): Likewise. Use gdb_byte for byte
buffer.
(irix_current_sos): Use gdb_byte.
* solib-som.c (som_current_sos): Use gdb_byte.
* sparc-ravenscar-thread.c (supply_register_at_address)
(sparc_ravenscar_generic_store_registers): Use gdb_byte.
* spu-multiarch.c (spu_xfer_partial): Add cast to 'char *'.
* spu-tdep.c (spu_get_overlay_table): Use gdb_byte.
* tic6x-tdep.c (tic6x_breakpoint_from_pc): Change return type to
'gdb_byte *'.
* tic6x-tdep.h (struct gdbarch_tdep) <breakpoint>: Change type to
'gdb_byte *'.
* tracepoint.c (tfile_fetch_registers): Use gdb_byte.
* xstormy16-tdep.c (xstormy16_extract_return_value)
(xstormy16_store_return_value): Change parameter type to
'gdb_byte *'. Adjust.
(xstormy16_push_dummy_call): Use gdb_byte.
* xtensa-tdep.c (xtensa_scan_prologue, call0_ret)
(call0_analyze_prologue, execute_code): Use gdb_byte.
The current throw_perror_with_name/TARGET_CLOSE_ERROR calls assume
errno is still set to the right error, although remote_unpush_target
is called in between, which may well change errno.
Tested on x86_64 Fedora 17 w/ gdbserver.
gdb/
2013-04-09 Pedro Alves <palves@redhat.com>
* remote.c (unpush_and_perror): New function.
(readchar, remote_serial_write): Use it.
* remote.c (remote_trace_find): Change type of parameters 'addr1'
and 'addr2' to CORE_ADDR.
* target.c (update_current_target): Update.
* target.h (struct target_ops) <to_trace_find>: Change parameter
type to CORE_ADDR.
* tracepoint.c (tfind_1): Change type of parameters 'addr1' and
'addr2' to CORE_ADDR.
(tfile_trace_find): Likewise.
(tfile_get_traceframe_address): Change return type to CORE_ADDR.
Change local variable 'addr' to type CORE_ADDR.
* tracepoint.h (tfind_1): Update declaration.
PR gdb/15275 notes that when debugging with a remote connection over a
serial link and the link is disconnected, say by disconnecting USB
serial port, the GDB quit command no longer works:
(gdb)
tar ext /dev/ttyACM0
&"tar ext /dev/ttyACM0\n"
~"Remote debugging using /dev/ttyACM0\n"
^done
(gdb)
set debug remote 1
&"set debug remote 1\n"
^done
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
(gdb)
(gdb)
quit
&"quit\n"
&"Sending packet: $qTStatus#49..."
&"putpkt: write failed: Input/output error.\n"
^error,msg="putpkt: write failed: Input/output error."
This is not reproducible with TCP connections, as with that, sending
doesn't error out, but instead the error is detected on the subsequent
readchar. When that read fails, we unpush the remote target, and
throw TARGET_CLOSE_ERROR. To address PR gdb/15275, instead of
catching the error in remote_get_trace_status as presently done (which
leaves this same issue latent for another packet to trip on), or of
making ser-unix.c fake success too on failed writes, so we'd get to
readchar detecting the error on serial ports too, better let the error
propagate out of serial_write, and catch it at the remote.c level,
throwing away the target if writing fails too, instead of delaying
that until the next read.
gdb/
2013-04-02 Pedro Alves <palves@redhat.com>
PR gdb/15275
* remote.c (send_interrupt_sequence): Use remote_serial_write.
(remote_serial_write): New function.
(putpkt_binary, getpkt_or_notif_sane_1): Use remote_serial_write.
GDB currently sends a qTStatus even if the target previously replied
an empty packet to a previous qTStatus. If the target doesn't
recognize the packet, there's no point in trying again.
The machinery we have in place is packet_ok, which has the nice side
effect of forcing one to install a configuration command/knob for the
packet in question, which is often handy when you need to debug
things, and/or emulate a target that doesn't support the packet, or even,
it can be used as workaround for the old broken kgdb's that return error
to qTSTatus instead of an empty packet.
gdb/
2013-03-28 Pedro Alves <palves@redhat.com>
* NEWS (New options): New section.
(New options): Mention set/show remote trace-status-packet.
* remote.c (PACKET_qTStatus): New enumeration value.
(remote_get_trace_status): Skip sending qTStatus if the packet is
disabled. Use packet_ok.
(_initialize_remote): Register a configuration command for
qTStatus packet.
gdb/doc/
2013-03-28 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
table>: Add entry for "trace-status".
It makes no sense to talk about an "unlimited" address size in this
context.
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is 0.
(gdb) set remoteaddresssize 0
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is unlimited.
"set remoteaddresssize 0" mapping to UINT_MAX means you can't
force gdb through this path twice in the same GDB run:
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
unsigned int address_size = remote_address_size;
/* If "remoteaddresssize" was not set, default to target address size. */
if (!address_size)
address_size = gdbarch_addr_bit (target_gdbarch ());
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Make "set remoteaddresssize"
a zuinteger command instead of uinteger.
* exceptions.h (enum errors): New entry TARGET_CLOSE_ERROR.
* remote.c (trace_error): Remove the special handling of '2'.
(readchar) <SERIAL_EOF>
(readchar) <SERIAL_ERROR>
(getpkt_or_notif_sane_1): Use TARGET_CLOSE_ERROR for them.
(remote_get_trace_status): Call throw_exception if EX is
TARGET_CLOSE_ERROR.
* utils.c (perror_with_name): Rename to ...
(throw_perror_with_name): ... here. New parameter errcode, describe it
in the function comment.
(perror_with_name): New function wrapper.
* utils.h (enum errors): New stub declaration.
(throw_perror_with_name): New declaration.
gdb/testsuite/
* gdb.server/server-kill.c: New file.
* gdb.server/server-kill.exp: New file.
This is sort of a continuation of Keith's parse_exp_1 constification
patch. It started out by undoing these bits:
@@ -754,9 +754,12 @@ validate_actionline (char **line, struct
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
- p = tmp_p;
- exp = parse_exp_1 (&p, loc->address,
+ const char *q;
+
+ q = tmp_p;
+ exp = parse_exp_1 (&q, loc->address,
block_for_pc (loc->address), 1);
+ p = (char *) q;
and progressively making more things const upwards, fixing fallout,
rinse repeat, until GDB built again (--enable-targets=all).
That ended up constifying lookup_cmd/add_cmd and (lots of) friends,
and the completers.
I didn't try to constify the command hooks themselves, because I know
upfront there are commands that write to the command string argument,
and I think I managed to stop at a nice non-hacky split point already.
I think the only non-really-super-obvious changes are
tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions.
The rest is just mostly about 'char *' => 'const char *', 'char **'=>
'const char **', and the occasional (e.g., deprecated_cmd_warning)
case of 'char **'=> 'const char *', where/when I noticed that nothing
actually cares about the pointer to pointer output.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2013-03-13 Pedro Alves <palves@redhat.com>
* ada-lang.c (struct add_partial_datum) <text, text0, word>: Make
fields const.
(ada_make_symbol_completion_list): Make "text0" parameter const.
* ax-gdb.c (agent_eval_command_one): Make "exp" parameter const.
* breakpoint.c (condition_completer): Make "text" and "word"
parameters const. Adjust.
(check_tracepoint_command): Adjust to validate_actionline
prototype change.
(catch_syscall_completer): Make "text" and "word" parameters
const.
* cli/cli-cmds.c (show_user): Make "comname" local const.
(valid_command_p): Make "command" parameter const.
(alias_command): Make "alias_prefix" and "command_prefix" locals
const.
* cli/cli-decode.c (add_cmd): Make "name" parameter const.
(add_alias_cmd): Make "name" and "oldname" parameters const.
Adjust. No longer make copy of OLDNAME.
(add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd)
(add_setshow_cmd_full, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd)
(delete_cmd, add_info, add_info_alias, add_com, add_com_alias):
Make "name" parameter const.
(help_cmd): Rename "command" parameter to "arg". New const local
"command".
(find_cmd): Make "command" parameter const.
(lookup_cmd_1): Make "text" parameter pointer to const. Adjust to
deprecated_cmd_warning prototype change.
(undef_cmd_error): Make "cmdtype" parameter const.
(lookup_cmd): Make "line" parameter const.
(deprecated_cmd_warning): Change type of "text" parameter to
pointer to const char, from pointer to pointer to char. Adjust.
(lookup_cmd_composition): Make "text" parameter const.
(complete_on_cmdlist, complete_on_enum): Make "text" and "word"
parameters const.
* cli/cli-decode.h (struct cmd_list_element) <name>: Make field
const.
* cli/cli-script.c (validate_comname): Make "tem" local const.
(define_command): New const local "tem_c". Use it in calls to
lookup_cmd.
(document_command): Make "tem" and "comfull" locals const.
(show_user_1): Make "prefix" and "name" parameters const.
* cli-script.h (show_user_1): Make "prefix" and "name" parameters
const.
* command.h (add_cmd, add_alias_cmd, add_prefix_cmd)
(add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1)
(deprecated_cmd_warning, lookup_cmd_composition, add_com)
(add_com_alias, add_info, add_info_alias, complete_on_cmdlist)
(complete_on_enum, add_setshow_enum_cmd)
(add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd)
(add_setshow_filename_cmd, add_setshow_string_cmd)
(add_setshow_string_noescape_cmd)
(add_setshow_optional_filename_cmd, add_setshow_integer_cmd)
(add_setshow_uinteger_cmd, add_setshow_zinteger_cmd)
(add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd):
Change prototypes, constifying strings.
* completer.c (noop_completer, filename_completer): Make "text"
and "prefix" parameters const.
(location_completer, expression_completer)
(complete_line_internal): Make "text" and "prefix" parameters
const and adjust.
(command_completer, signal_completer): Make "text" and "prefix"
parameters const.
* completer.h (noop_completer, filename_completer)
(expression_completer, location_completer, command_completer)
(signal_completer): Change prototypes.
* corefile.c (complete_set_gnutarget): Make "text" and "word"
parameters const.
* cp-abi.c (cp_abi_completer): Likewise.
* expression.h (parse_expression_for_completion): Change
prototype.
* f-lang.c (f_make_symbol_completion_list): Make "text" and "word"
parameters const.
* infcmd.c (_initialize_infcmd): Make "cmd_name" local const.
* infrun.c (handle_completer): Make "text" and "word" parameters
const.
* interps.c (interpreter_completer): Make "text" and "word"
parameters const.
* language.h (struct language_defn)
<la_make_symbol_completion_list>: Make "text" and "word"
parameters const.
* parse.c (parse_exp_1): Move const hack to parse_exp_in_context.
(parse_exp_in_context): Rename to ...
(parse_exp_in_context_1): ... this.
(parse_exp_in_context): Reimplement, with const hack from
parse_exp_1.
(parse_expression_for_completion): Make "string" parameter const.
* printcmd.c (decode_format): Make "string_ptr" parameter pointer
to pointer to const char. Adjust.
(print_command_1): Make "exp" parameter const.
(output_command): Rename to ...
(output_command_const): ... this. Make "exp" parameter const.
(output_command): Reimplement.
(x_command): Adjust.
(display_command): Rename "exp" parameter to "arg". New "exp"
local, const version of "arg".
* python/py-auto-load.c (gdbpy_initialize_auto_load): Make
"cmd_name" local const.
* python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree
call.
(cmdpy_completer): Make "text" and "word" parameters const.
(gdbpy_parse_command_name): Make "prefix_text2" local const.
* python/py-param.c (add_setshow_generic): Make "tmp_name" local
const.
* remote.c (_initialize_remote): Make "cmd_name" local const.
* symtab.c (language_search_unquoted_string): Make "text" and "p"
parameters const. Adjust.
(completion_list_add_fields): Make "sym_text", "text" and "word"
parameters const.
(struct add_name_data) <sym_text, text, word>: Make fields const.
(default_make_symbol_completion_list_break_on): Make "text" and
"word" parameters const. Adjust locals.
(default_make_symbol_completion_list)
(make_symbol_completion_list, make_symbol_completion_type)
(make_symbol_completion_list_fn): Make "text" and "word"
parameters const.
(make_file_symbol_completion_list): Make "text", "word" and
"srcfile" parameters const. Adjust locals.
(add_filename_to_list): Make "text" and "word" parameters const.
(struct add_partial_filename_data) <text, word>: Make fields
const.
(make_source_files_completion_list): Make "text" and "word"
parameters const.
* symtab.h (default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type enum type_code)
(make_symbol_completion_list_fn make_file_symbol_completion_list)
(make_source_files_completion_list): Change prototype.
* top.c (execute_command): Adjust to pass pointer to pointer to
const char to lookup_cmd, and to deprecated_cmd_warning prototype
change.
(set_verbose): Make "cmdname" local const.
* tracepoint.c (decode_agent_options): Make "exp" parameter const,
and adjust.
(validate_actionline): Make "line" parameter a pointer to const
char, and adjust.
(encode_actions_1): Make "action_exp" local const, and adjust.
(encode_actions): Adjust.
(replace_comma): Delete.
(trace_dump_actions): Make "action_exp" and "next_comma" locals
const, and adjust. Don't frob the action string while splitting
it at commas. Instead, make a copy of each split substring in
turn.
(trace_dump_command): Adjust to validate_actionline prototype
change.
* tracepoint.h (decode_agent_options, decode_agent_options)
(encode_actions, validate_actionline): Change prototypes.
* valprint.h (output_command): Delete declaration.
(output_command_const): Declare.
* value.c (function_destroyer): Cast const away in xfree call.
We define the following packets:
Qbtrace:bts enable branch tracing for the current thread
returns "OK" or "Enn"
Qbtrace:off disable branch tracing for the current thread
returns "OK" or "Enn"
qXfer:btrace:read read the full branch trace data for the current thread
gdb/
* target.h (enum target_object): Add TARGET_OBJECT_BTRACE.
* remote.c: Include btrace.h.
(struct btrace_target_info): New struct.
(remote_supports_btrace): New function.
(send_Qbtrace): New function.
(remote_enable_btrace): New function.
(remote_disable_btrace): New function.
(remote_teardown_btrace): New function.
(remote_read_btrace): New function.
(init_remote_ops): Add btrace ops.
(enum <unnamed>): Add btrace packets.
(struct protocol_feature remote_protocol_features[]): Add btrace packets.
(_initialize_remote): Add packet configuration for branch tracing.
gdbserver/
* target.h (struct target_ops): Add btrace ops.
(target_supports_btrace): New macro.
(target_enable_btrace): New macro.
(target_disable_btrace): New macro.
(target_read_btrace): New macro.
* gdbthread.h (struct thread_info): Add btrace field.
* server.c: Include btrace-common.h.
(handle_btrace_general_set): New function.
(handle_btrace_enable): New function.
(handle_btrace_disable): New function.
(handle_general_set): Call handle_btrace_general_set.
(handle_qxfer_btrace): New function.
(struct qxfer qxfer_packets[]): Add btrace entry.
* inferiors.c (remove_thread): Disable btrace.
* linux-low: Include linux-btrace.h.
(linux_low_enable_btrace): New function.
(linux_low_read_btrace): New function.
(linux_target_ops): Add btrace ops.
* configure.srv (i[34567]86-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
(x86_64-*-linux*): Add linux-btrace.o.
Add srv_linux_btrace=yes.
* configure.ac: Define HAVE_LINUX_BTRACE.
* config.in: Regenerated.
* configure: Regenerated.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention set and show trace-buffer-size commands.
Mention new packet.
* target.h (struct target_ops): New method
to_set_trace_buffer_size.
(target_set_trace_buffer_size): New macro.
* target.c (update_current_target): Set up new method.
* tracepoint.c (trace_buffer_size): New global.
(start_tracing): Send it to the target.
(set_trace_buffer_size): New function.
(_initialize_tracepoint): Add new setshow for trace-buffer-size.
* remote.c (remote_set_trace_buffer_size): New function.
(_initialize_remote): Use it.
(QTBuffer:size) New remote command.
(PACKET_QTBuffer_size): New enum.
(remote_protocol_features): Add an entry for
PACKET_QTBuffer_size.
gdb/gdbserver/
* tracepoint.c (trace_buffer_size): New global.
(DEFAULT_TRACE_BUFFER_SIZE): New define.
(init_trace_buffer): Change to one-argument function. Allocate
trace buffer memory.
(handle_tracepoint_general_set): Call cmd_bigqtbuffer_size to
handle QTBuffer:size packet.
(cmd_bigqtbuffer_size): New function.
(initialize_tracepoint): Call init_trace_buffer with
DEFAULT_TRACE_BUFFER_SIZE.
* server.c (handle_query): Add QTBuffer:size in the
supported packets.
gdb/doc/
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
trace-buffer-size set and show commands.
(Tracepoint Packets): Document QTBuffer:size.
(General Query Packets): Document QTBuffer:size.
gdb/testsuite/
* gdb.trace/trace-buffer-size.exp: New file.
* gdb.trace/trace-buffer-size.c: New file.
Move the declarations to a header, rather than declaring them in
(multiple) .c files.
gdb/
2013-03-07 Pedro Alves <palves@redhat.com>
* remote.c (hex2bin, bin2hex): Move extern declarations to ...
* remote.h (hex2bin, bin2hex): ... here.
* tracepoint.c (hex2bin, bin2hex): Remove extern declarations.
Hafiz Abid Qadeer <abidh@codesourcery.com>
gdb/
* NEWS: Mention new field "trace-file".
* tracepoint.c (trace_status_mi): Output "trace-file" field.
(tfile_open): Record the trace file's filename in the trace
status.
(tfile_files_info): Mention the name of the trace file.
Check the "filename" field explicitely.
(trace_status_command): Explicitely check "filename" field.
(trace_find_command): Ditto.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
* tracepoint.h (struct trace_status) <from_file>: Rename it
to "filename" and make it hold the trace file's filename
instead of a boolean.
* remote.c (remote_get_trace_status): Initialize "filename"
field with NULL instead of 0.
gdb/doc/
* gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
Document the "trace-file" field.
gdb/testsuite/
* gdb.trace/tfile.exp: Add test for -trace-status command.
Yao writes:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
GDB gets an internal error when it connects to GDBserver started with
'--disable-packet=qC'.
Sending packet: $QNonStop:0#8c...Packet received: OK
Sending packet: $?#3f...Packet received: T0505:00000000;04:00f0ffbf;08:b0c2e44c;thread:p4255.4255;core:1;
Sending packet: $Hc-1#09...Packet received: E01
Sending packet: $qC#b4...Packet received:
Sending packet: $qAttached:a410#bf...Packet received: E01
Packet qAttached (query-attached) is supported
warning: Remote failure reply: E01
Sending packet: $qOffsets#4b...Packet received:
../../../git/gdb/target.c:3248: internal-error: Can't determine the current address space of thread Thread 16981
When start remote, the call chain is as follows,
remote_start_remote
add_current_inferior_and_thread <--[1]
...
start_remote
wait_for_inferior
remote_wait_as
process_stop_reply
get_thread_arch_regcache <--[2]
remote_notice_new_inferior <--[3]
GDB sends packet "qC" in [1] and adds the thread/inferior if the remote
stubs understands "qC". In [2], GDB looks for the inferior to build a
regcache, and notices a new inferior in [3]. As we can see, GDB assumes
that the inferior can be found in [2]. Once the remote stub doesn't
support "qC", GDB can't look for the inferior in [2], and emits an
internal error.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Right after the initial connection, we query the target for its state,
with the ? packet. We store the resulting wait status / stop reply
aside, and query the target for the current thread, using qC, which
fails, so we fake a ptid for the target's thread. We then later,
after the initial setup, end up consuming that set-aside wait status,
parsing the T stop reply, which contains a "thread" "register" (which
was the thread the target would have replied to qC). We get into
trouble because the ptid in that stop reply doesn't match our faked up
ptid in the initial setup, although the target threads are the same...
So we had the T stop reply handy all along. We might as well extract
the thread's ptid from it, and avoid all the resulting issues.
qC is also used after vRun, in order to discover the new process'es
main thread. But, vRun's reply is also a wait status, just like
'?''s, which is quite convenient.
This means that if we have a "Txx thread: ptid" reply, then we don't
really need qC. The patch makes GDB look in the T reply first, and if
not found, try with qC. The packet handling seems to have been added
in gdb-4.18 (1999), and I see that in that same release, "Txx thread:
ptid" didn't exist yet, which probably explains why nobody though of
doing this before.
Regression tested against a gdbserver with qC disabled (and then
enabled), on x86_64 Fedora 17.
2013-01-25 Pedro Alves <palves@redhat.com>
* remote.c (stop_reply_extract_thread): New.
(add_current_inferior_and_thread): New parameter 'wait_status'.
Handle it.
(remote_start_remote): Pass wait status to
add_current_inferior_and_thread.
(extended_remote_run): Update comment.
(extended_remote_create_inferior_1): Pass wait status to
add_current_inferior_and_thread.
Pedro Alves <palves@redhat.com>
PR remote/14786
* remote.c (remote_threads_info): Make a copy of the reply from
qfThreadInfo and use that instead of rs->buf.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
2012-12-15 Yao Qi <yao@codesourcery.com>
* remote.c (getpkt_or_notif_sane): Add one more argument in
its declaration.
(getpkt_or_notif_sane_1): Add one more argument.
(getpkt_sane): Update caller.
(getpkt_or_notif_sane): Likewise. Update call
togetpkt_or_notif_sane_1.
(remote_wait_ns): Update caller.
there is an error inserting hardware breakpoints and use the
error message from the target.
* gdb/breakpoint.c (insert_bp_location, insert_breakpoint_locations):
Catch this exception and print the error message contained within. Do not
print the default hardware error breakpoint message in this case.
* cli/cli-cmds.c (max_user_call_depth): Add 'unsigned'.
(init_cmds): Call add_setshow_uinteger_cmd for command
'max-user-call-depth'.
* cli/cli-script.c (execute_user_command): Add 'unsigned' to the
declaration of 'max_user_call_depth'.
* frame.c (backtrace_limit): Add 'unsigned'.
(_initialize_frame): Call add_setshow_uinteger_cmd for command
'limit'.
* remote.c (remoteaddresssize): Add 'unsigned'.
(remote_address_masked): Change local var 'address_size' to
'unsigned'.
(_initialize_remote): Call add_setshow_uinteger_cmd for
'remoteaddresssize'.
* top.c (history_size): Add 'unsigned'.
(show_commands): Change local variables to 'unsigned'.
(set_history_size_command): Don't check history_size is negative.
Adjust the condition to call unstifle_history and set history_size
to UNIT_MAX.
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbthread.h (ALL_THREADS): New macro.
(thread_list): Declare.
* infrun.c (handle_inferior_event) <spurious signal>: Don't keep
going, but instead fall through to the stepping handling.
* linux-nat.c (resume_lwp): New parameter 'signo'. Resume with
the passed in signal. Adjust debug output.
(resume_callback): Rename to ...
(linux_nat_resume_callback): ... this. Pass the thread's last
stop signal, if in "pass" state.
(linux_nat_resume): Adjust to rename.
(stop_wait_callback): New assertion. Don't respawn signals;
instead let the LWP remain with SIGNALLED set.
(linux_nat_wait_1): Remove flushing of pending SIGSTOPs.
* remote.c (append_pending_thread_resumptions): New.
(remote_vcont_resume): Call it.
* target.h (target_resume): Extend comment.
gdb/testsuite/
2012-06-28 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdb.threads/siginfo-threads.exp: New file.
* gdb.threads/siginfo-threads.c: New file.
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Hui Zhu <teawater@gmail.com>
Yao Qi <yao@codesourcery.com>
* remote.c (struct remote_state): New field `starting_up'.
(remote_start_remote): Set and clear it.
(remote_can_download_tracepoint): If starting up, return false.
* remote.c (remote_supports_cond_breakpoints): New forward
declaration.
(remote_add_target_side_condition): New function.
(remote_insert_breakpoint): Add target-side breakpoint
conditional if supported.
(remote_insert_hw_breakpoint): Likewise.
(init_remote_ops): Set to_supports_evaluation_of_breakpoint_conditions
hook.
* target.c (update_current_target): Inherit
to_supports_evaluation_of_breakpoint_conditions.
Default to_supports_evaluation_of_breakpoint_conditions to return_zero.
* target.h (struct target_ops)
<to_supports_evaluation_of_breakpoint_conditions>: New field.
(target_supports_evaluation_of_breakpoint_conditions): New #define.
* breakpoint.c (get_first_locp_gte_addr): New forward declaration.
(condition_evaluation_both, condition_evaluation_auto,
condition_evaluation_host, condition_evaluation_target,
condition_evaluation_enums, condition_evaluation_mode_1,
condition_evaluation_mode): New static globals.
(translate_condition_evaluation_mode): New function.
(breakpoint_condition_evaluation_mode): New function.
(gdb_evaluates_breakpoint_condition_p): New function.
(ALL_BP_LOCATIONS_AT_ADDR): New helper macro.
(mark_breakpoint_modified): New function.
(mark_breakpoint_location_modified): New function.
(set_condition_evaluation_mode): New function.
(show_condition_evaluation_mode): New function.
(bp_location_compare_addrs): New function.
(get_first_location_gte_addr): New helper function.
(set_breakpoint_condition): Free condition bytecode if locations
has become unconditional. Call mark_breakpoint_modified (...).
(condition_command): Call update_global_location_list (1) for
breakpoints.
(breakpoint_xfer_memory): Use is_breakpoint (...).
(is_breakpoint): New function.
(parse_cond_to_aexpr): New function.
(build_target_condition_list): New function.
(insert_bp_location): Handle target-side conditional
breakpoints and call build_target_condition_list (...).
(update_inserted_breakpoint_locations): New function.
(insert_breakpoint_locations): Handle target-side conditional
breakpoints.
(bpstat_check_breakpoint_conditions): Add comment.
(bp_condition_evaluator): New function.
(bp_location_condition_evaluator): New function.
(print_breakpoint_location): Print information on where the condition
will be evaluated.
(print_one_breakpoint_location): Likewise.
(init_bp_location): Call mark_breakpoint_location_modified (...) for
breakpoint location.
(force_breakpoint_reinsertion): New functions.
(update_global_location_list): Handle target-side breakpoint
conditions.
Reinsert locations that are already inserted if conditions have
changed.
(bp_location_dtor): Free agent expression bytecode.
(disable_breakpoint): Call mark_breakpoint_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(disable_command): Call mark_breakpoint_location_modified (...).
Call update_global_location_list (...) with parameter 1 for breakpoints.
(enable_breakpoint_disp): Call mark_breakpoint_modified (...).
(enable_command): mark_breakpoint_location_modified (...).
(_initialize_breakpoint): Update documentation and add
condition-evaluation breakpoint subcommand.
* breakpoint.h: Include ax.h.
(condition_list): New data structure.
(condition_status): New enum.
(bp_target_info) <cond_list>: New field.
(bp_location) <condition_changed, cond_bytecode>: New fields.
(is_breakpoint): New prototype.
* remote.c (remote_state) <cond_breakpoints>: New field.
(PACKET_ConditionalBreakpoints): New enum.
(remote_cond_breakpoint_feature): New function.
(remote_protocol_features): Add new ConditionalBreakpoints entry.
(remote_supports_cond_breakpoints): New function.
(_initialize_remote): Add new packet configuration for
target-side conditional breakpoints.
2012-02-15 Pedro Alves <palves@redhat.com>
* remote.c (remote_detach_1, extended_remote_attach_1): Tweak
output to be like native targets'.
(remote_pid_to_str): Special case the null ptid.
gdb/testsuite/
2012-02-15 Pedro Alves <palves@redhat.com>
Support extended-remote. Avoid cascading timeouts.
* gdb.base/attach.exp (do_attach_tests): Add expected output for
the extended-remote target. If attaching with no file fails, load
the file manually.
* gdb.server/ext-attach.exp: Adjust expected attach/detach output.
known by gdb. Such monitor commands can take a long time
to execute. An example of this is the "leak_search" monitor
command implemented in the Valgrind gdbserver.
Currently, gdb will timeout on such a monitor command.
The remote stub however will continue to execute the
command and send the output later. Gdb and the remote
stub can then be desynchronised : gdb sends a packet,
and the reply read from the stub is a previous packet.
The change committed uses getpkt_sane to detect a timeout.
In this case, it continues the loop.
A QUIT; is inserted in the loop to allow the user
to stop handling the current command. possibly
still creating a desynchronisation between gdb and the stub
but that will be upon user request.
2012-02-02 Pedro Alves <palves@redhat.com>
* tracepoint.c (cmd_qtminftpilen): Return 0 if there's no current
inferior.
gdb/
2012-02-02 Pedro Alves <palves@redhat.com>
* remote.c (remote_get_min_fast_tracepoint_insn_len): Return 0 if
the current inferior has no execution. Make sure the current
remote process matches gdb's current inferior.
* remote.c (remote_add_inferior): New `fake_pid_p' parameter. Use
it.
(remote_notice_new_inferior): If the remote end doesn't support
the multiprocess extensions, then the PID is fake.
(add_current_inferior_and_thread): New.
(remote_start_remote): Use it.
(extended_remote_attach_1): Adjust.
(extended_remote_create_inferior_1): Use
add_current_inferior_and_thread.
Ulrich Weigand <ulrich.weigand@linaro.org>
ChangeLog:
* remote.c (remote_multi_process_p): Only check for multi-process
protocol feature, do not check for extended protocol.
(remote_supports_multi_process): Check for extended protocol here.
(set_general_process): Likewise.
(extended_remote_kill): Likewise.
(remote_pid_to_str): Likewise.
(remote_query_supported): Always query multiprocess mode.
gdbserver/ChangeLog:
* server.c (handle_v_requests): Only support vAttach and vRun to
start multiple processes when in extended protocol mode.
Ulrich Weigand <ulrich.weigand@linaro.org>
* inferior.h (struct inferior): Add fake_pid_p.
* inferior.c (exit_inferior_1): Clear fake_pid_p.
* remote.c (remote_start_remote): Set fake_pid_p if we have to use
magic_null_ptid since the remote side doesn't provide a real PID.
This function takes a VMA and was forcing us to perform a cast to
compile without warning on one platform. Except that the cast caused
a warning on sparc-solaris. This patch fixes the problem by using
phex_nz instead.
gdb/ChangeLog:
* remote.c (remote_get_tracepoint_status): Delete addrbuf
local variable. Avoid use of sprintf_vma.
* breakpoint.h (struct tracepoint): New field traceframe_usage.
* breakpoint.c (print_one_breakpoint_location): Identify
tracepoints as such when reporting hit counts, report
trace buffer usage.
(create_tracepoint_from_upload): Copy status info.
* tracepoint.h (struct trace_status): Rename error_desc to stop_desc,
add fields user_name, notes, start_time, stop_time.
(struct uploaded_tp): Add fields hit_count, traceframe_usage.
* tracepoint.c (trace_user): New global.
(trace_notes): New global.
(trace_stop_notes): New global.
(start_tracing): Add argument and trace note handling.
(stop_tracing): Ditto.
(trace_start_command): Add notes argument.
(trace_stop_command): Ditto.
(trace_status_command): Report additional status info.
(trace_status_mi): Similarly.
(trace_save): Update, record tracepoint status.
(set_disconnected_tracing): Call target method directly.
(send_disconnected_tracing_value): Remove.
(set_trace_user): New function.
(set_trace_notes): New function.
(set_trace_stop_notes): New function.
(parse_trace_status): Handle additional status.
(parse_tracepoint_status): New function.
(parse_tracepoint_definition): Call it.
(tfile_get_tracepoint_status): New function.
(init_tfile_ops): Use it.
(_initialize_tracepoint): Add new setshows.
* target.h (struct target_ops): New methods to_get_tracepoint_status
and to_set_trace_notes.
(target_get_tracepoint_status): New macro.
(target_set_trace_notes): New macro.
* target.c (update_current_target): Add new methods.
* remote.c (remote_get_tracepoint_status): New function.
(remote_set_trace_notes): New function.
(init_remote_ops): Add them.
* mi/mi-main.c (mi_cmd_trace_start): Add argument to call.
(mi_cmd_trace_stop): Ditto.
* tracepoint.c (struct tracepoint): New field traceframe_usage.
(tracing_start_time): New global.
(tracing_stop_time): New global.
(tracing_user_name): New global.
(tracing_notes): New global.
(tracing_stop_note): New global.
(cmd_qtstart): Set traceframe_usage, start_time.
(stop_tracing): Set stop_time.
(cmd_qtstatus): Report additional status.
(cmd_qtp): New function.
(handle_tracepoint_query): Call it.
(cmd_qtnotes): New function.
(handle_tracepoint_general_set): Call it.
(get_timestamp): Rename from tsv_get_timestamp.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
note-related options and variables.
(Tracepoint Packets): Document packet changes.
* gdb.trace/tstatus.exp: New.
* gdb.trace/actions.c: Include string.h.
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Document shorter fast tracepoints and qTMinFTPILen packet.
* i386-tdep.c (i386_fast_tracepoint_valid_at): Query target for
the minimum instruction size for fast tracepoints.
* target.h (struct target_ops): Add new method
to_get_min_fast_tracepoint_insn_len.
(target_get_min_fast_tracepoint_insn_len): New.
* target.c (update_current_target): Set up new target operation.
* remote.c (remote_write_bytes_aux): Fix typo.
(remote_get_min_fast_tracepoint_insn_len): New.
(init_remote_ops): Initialize new field.
* gdb.texinfo (Create and Delete Tracepoints): Describe what is
needed to get shorter fast tracepoints.
(Tracepoint Packets): Document new qTMinFTPILen packet.
* linux-x86-low.c (small_jump_insn): New.
(i386_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message, build a trampoline and issue a small
jump instruction to it.
(x86_install_fast_tracepoint_jump_pad): Add arguments for
trampoline and error message.
(x86_get_min_fast_tracepoint_insn_len): New.
(the_low_target): Add call to x86_get_min_fast_tracepoint_insn_len.
* linux-low.h (struct linux_target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new operation.
* linux-low.c (linux_install_fast_tracepoint_jump_pad): Add
arguments.
(linux_get_min_fast_tracepoint_insn_len): New function.
(linux_target_op): Add new operation.
* tracepoint.c (gdb_trampoline_buffer): New IPA variable.
(gdb_trampoline_buffer_end): Ditto.
(gdb_trampoline_buffer_error): Ditto.
(struct ipa_sym_addresses): Add fields for new IPA variables.
(symbol_list): Add entries for new IPA variables.
(struct tracepoint): Add fields to hold the address range of the
trampoline used by the tracepoint.
(trampoline_buffer_head): New static variable.
(trampoline_buffer_tail): Ditto.
(claim_trampoline_space): New function.
(have_fast_tracepoint_trampoline_buffer): New function.
(clone_fast_tracepoint): Fill in trampoline fields of tracepoint
structure.
(install_fast_tracepoint): Ditto, also add error buffer argument.
(cmd_qtminftpilen): New function.
(handle_tracepoint_query): Add response to qTMinFTPILen packet.
(fast_tracepoint_from_trampoline_address): New function.
(fast_tracepoint_collecting): Handle trampoline as part of jump
pad space.
(set_trampoline_buffer_space): New function.
(initialize_tracepoint): Initialize new IPA variables.
* target.h (struct target_ops): Add arguments to
install_fast_tracepoint_jump_pad operation, add new
get_min_fast_tracepoint_insn_len operation.
(target_get_min_fast_tracepoint_insn_len): New.
(install_fast_tracepoint_jump_pad): Add arguments.
* server.h (IPA_BUFSIZ): Define.
* linux-i386-ipa.c: Include extra header files.
(initialize_fast_tracepoint_trampoline_buffer): New function.
(initialize_low_tracepoint): Call it.
* server.h (set_trampoline_buffer_space): Declare.
(claim_trampoline_space): Ditto.
(have_fast_tracepoint_trampoline_buffer): Ditto.
* gdb.trace/ftrace.c: New.
* gdb.trace/ftrace.exp: New.
of parameter from tracepoint to bp_location.
* target.c (update_current_target): Update.
* tracepoint.c (start_tracing): Update.
* remote.c (remote_download_tracepoint): Remove loop for each location
of a tracepoint.
* infrun.c (disable_randomization): New global variable.
(show_disable_randomization): New function.
(set_disable_randomization): Likewise.
(_initialize_infrun): Install set/show disable-randomization
commands.
* linux-nat.c (disable_randomization): Remove.
(show_disable_randomization): Likewise.
(set_disable_randomization): Likewise.
(_initialize_linux_nat): No longer install set/show
disable-randomization commands here.
(linux_nat_supports_disable_randomization): New function.
(linux_nat_add_target): Install it.
* remote.c (PACKET_QDisableRandomization): New enum value.
(remote_protocol_packets): Support QDisableRandomization.
(_initialize_remote): Likewise.
(remote_supports_disable_randomization): New function.
(init_remote_ops): Install it.
(extended_remote_supports_disable_randomization): New function.
(init_extended_remote_ops): Install it.
(extended_remote_disable_randomization): New function.
(extended_remote_create_inferior_1): Call it.
* target.h (struct target_ops): Add to_supports_disable_randomization.
(target_supports_disable_randomization): Add prototype.
* target.c (target_supports_disable_randomization): New function.
(find_default_supports_disable_randomization): Likewise.
(init_dummy_target): Install it.
doc/
* gdb.texinfo (Starting your Program): "set disable-randomization"
is no longer Linux-specific.
(Remote Configuration): Document "set remote
disable-randomization-packet".
(General Query Packets): Document "QDisableRandomization" packet
and add it to "qSupported" list.
gdbserver/
* configure.ac: Check support for personality routine.
* configure: Regenerate.
* config.in: Likewise.
* linux-low.c: Include <sys/personality.h>.
Define ADDR_NO_RANDOMIZE if necessary.
(linux_create_inferior): Disable address space randomization when
forking inferior, if requested.
(linux_supports_disable_randomization): New function.
(linux_target_ops): Install it.
* server.h (disable_randomization): Declare.
* server.c (disable_randomization): New global variable.
(handle_general_set): Handle QDisableRandomization.
(handle_query): Likewise for qSupported.
(main): Support --disable-randomization and --no-disable-randomization
command line arguments.
* target.h (struct target_ops): Add supports_disable_randomization.
(target_supports_disable_randomization): New macro.
* remote.c (remote_region_ok_for_hw_watchpoint): New function.
(remote_hw_watchpoint_length_limit): New variable.
(_initialize_remote) add set,show cmds for this new variable.
* gdb.texinfo: document these new commands.
* NEWS: Mention these new commands.
gdb/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* breakpoint.c, breakpoint.h, cli/cli-dump.c, dwarf2expr.c,
gdbarch.c, gdbarch.sh, remote.c: Various spelling fixes.
gdb/testsuite/ChangeLog:
From Stephen Kitt <steve@sk2.org>
* gdb.base/help.exp: Adjust following some spelling corrections
in GDB.
experiment is still running.
gdb/
* breakpoint.c (disable_breakpoint): Disable all locations
associated with a tracepoint on target if a trace experiment is
running.
(disable_command): Disable a specific tracepoint location on target if
a trace experiment is running.
(do_enable_breakpoint): Enable all locations associated with a
tracepoint on target if a trace experiment is running.
(enable_command) Enable a specific tracepoint location on target if a
trace experiment is running.
* target.c (update_current_target): Add INHERIT and de_fault clauses for
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint.
* target.h: Add declaration of struct bp_location.
(struct target_ops): Add new functions
to_supports_enable_disable_tracepoint, to_enable_tracepoint and
to_disable_tracepoint to target operations.
(target_supports_enable_disable_tracepoint): New macro.
(target_enable_tracepoint): New macro.
(target_disable_tracepoint): New macro.
* remote.c (struct remote_state): Add new field.
(remote_enable_disable_tracepoint_feature): New.
(remote_protocol_features): Add new entry.
(remote_supports_enable_disable_tracepoint): New.
(remote_enable_tracepoint): New.
(remote_disable_tracepoint): New.
(init_remote_ops): Add remote_enable_tracepoint,
remote_disable_tracepoint and remote_supports_enable_disable_tracepoint
to remote operations.
* tracepoint.c (start_tracing): Allow tracing to start without any
tracepoints enabled with just a warning if they can be re-enabled
later.
* NEWS: Add news item for the new behaviour of the enable and disable
GDB commands when applied to tracepoints.
Add news items for the new remote packets QTEnable and QTDisable.
gdb/doc/
* gdb.texinfo: Document change in the behaviour of the enable and
disable GDB commands when applied to tracepoints.
Document the EnableDisableTracepoints remote stub feature.
Document QTEnable and QTDisable in the list of tracepoint packets.
gdb/gdbserver/
* server.c (handle_query): Add EnableDisableTracepoints to the list
of supported features.
* tracepoint.c (clear_installed_tracepoints): Uninstall disabled
tracepoints.
(cmd_qtenable_disable): New.
(cmd_qtstart): Install tracepoints even if disabled.
(handle_tracepoint_general_set): Add call to cmd_qtenable_disable on
receiving a QTEnable or QTDisable packet.
(gdb_collect): Skip data collection if fast tracepoint is disabled.
(ust_marker_to_static_tracepoint): Do not ignore disabled static
tracepoints.
(gdb_probe): Skip data collection if static tracepoint is disabled.
add to_pass_signals.
(target_notice_signals): Remove.
(target_pass_signals): Add prototype.
* target.c (update_current_target): Remove to_notice_signals;
mention to_pass_signals.
(target_pass_signals): New function.
(debug_to_notice_signals): Remove.
(setup_target_debug): Do not install debug_to_notice_signals.
* infrun.c (signal_pass): New global.
(resume): Call target_pass_signals.
(handle_inferior_event): Report all signals while stepping over
non-steppable watchpoint. Reset trap_expected to ensure breakpoints
are re-inserted when stepping over a signal handler.
(signal_cache_update): New function.
(signal_stop_update): Call it.
(signal_print_update): Likewise.
(signal_pass_update): Likewise.
(handle_command): Call signal_cache_update and target_pass_signals
instead of target_notice_signals.
(_initialize_infrun): Initialize signal_pass.
* linux-nat.c (pass_mask): New global.
(linux_nat_pass_signals): New function.
(linux_nat_create_inferior): Report all signals initially.
(linux_nat_attach): Likewise.
(linux_nat_resume): Use pass_mask to decide whether to directly
handle an inferior signal.
(linux_nat_wait_1): Likewise.
(linux_nat_add_target): Install to_pass_signals callback.
* nto-procfs.c (notice_signals): Remove.
(procfs_resume): Do not call notice_signals.
(procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(init_procfs_ops): Install to_pass_signals callback instead of
to_notice_signals callback.
(_initialize_procfs): Report all signals initially.
* procfs.c (procfs_notice_signals): Remove.
(procfs_pass_signals): New function.
(procfs_target): Install to_pass_signals callback instead of
to_notice_signals callback.
(register_gdb_signals): Remove.
(procfs_debug_inferior): Report all signals initially.
(procfs_init_inferior): Remove redundant register_gdb_signals call.
* remote.c (remote_pass_signals): Add numsigs and pass_signals
parameters; use them instead of calling signal_..._state routines.
(remote_notice_signals): Remove.
(remote_start_remote): Report all signals initially.
(remote_resume): Do not call remote_pass_signals.
(_initialize_remote): Install to_pass_signals callback instead of
to_notice_signals callback.
2011-03-08 Pedro Alves <pedro@codesourcery.com>
* remote.c (remote_check_symbols): Skip if the target has no
execution.
gdb/testsuite/
2011-03-08 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.server/ext-run.exp
(load new file without any gdbserver inferior): New test.
* target.c (target_read_live_memory): New function.
(memory_xfer_live_readonly_partial): New.
(memory_xfer_partial): If reading from a traceframe, fallback to
reading unavailable read-only memory from read-only regions of
live target memory.
* tracepoint.c (disconnect_tracing): Adjust.
(set_current_traceframe): New, factored out from
set_traceframe_number.
(set_traceframe_number): Reimplement to only change the traceframe
number on the GDB side.
(do_restore_current_traceframe_cleanup): Adjust.
(make_cleanup_restore_traceframe_number): New.
(cur_traceframe_number): New global.
(tfile_open): Set cur_traceframe_number to no traceframe.
(set_tfile_traceframe): New function.
(tfile_trace_find): If looking up a traceframe using any method
other than by number, make sure the current tfile traceframe
matches gdb's current traceframe. Update the current tfile
traceframe if the lookup succeeded.
(tfile_fetch_registers, tfile_xfer_partial)
(tfile_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
* remote.c (remote_traceframe_number): New global.
(remote_open_1): Set it to -1.
(set_remote_traceframe): New function.
(remote_fetch_registers, remote_store_registers)
(remote_xfer_memory, remote_xfer_partial)
(remote_get_trace_state_variable_value): Make sure the remote
traceframe matches gdb's current traceframe.
(remote_trace_find): If looking up a traceframe using any method
other than by number, make sure the current remote traceframe
matches gdb's current traceframe. Update the current remote
traceframe if the lookup succeeded.
* infrun.c (fetch_inferior_event): Adjust.
* tracepoint.h (set_current_traceframe): Declare.
(get_traceframe_number, set_traceframe_number): Add describing
comments.
* remote-fileio.c: Include target.h.
(remote_fileio_write_bytes): Delete.
(remote_fileio_func_open, remote_fileio_func_write)
(remote_fileio_func_rename, remote_fileio_func_unlink): Use
target_read_memory.
(remote_fileio_func_stat): Use target_read_memory and
target_write_memory.
(remote_fileio_func_gettimeofday): Use target_write_memory.
(remote_fileio_func_system): Use target_read_memory.
* remote.c (remote_write_bytes): Make it static.
(remote_read_bytes): Don't handle partial reads here.
* remote.h (remote_read_bytes): Delete declaration.
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <pedro@codesourcery.com>
* gdbthread.h (currently_stepping): New declaration.
* infrun.c (currently_stepping): Remove the forward declaration.
(currently_stepping): Make it global.
* linux-nat.c (resume_callback) <lp->stopped && lp->status == 0>: New
variables tp and step, initialized them. Pass STEP to to_resume.
Print also possibly "PTRACE_SINGLESTEP" if STEP. Initialize LP->STEP.
* remote.c (currently_stepping_callback): New.
(remote_vcont_resume)
<ptid_equal (ptid, minus_one_ptid) || ptid_is_pid (ptid)>:
New variable tp. Call currently_stepping_callback and step such
thread.
gdb/testsuite/
Revert:
2010-10-17 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.threads/sigstep-threads.exp: New file.
* gdb.threads/sigstep-threads.c: New file.
Thiago Jung Bauermann <bauerman@br.ibm.com>
Support for hw accelerated condition watchpoints in booke powerpc.
* breakpoint.c (fetch_watchpoint_value): Rename to fetch_subexp_value
and move to eval.c. Change callers.
(insert_bp_location): Pass watchpoint condition in
target_insert_watchpoint.
(remove_breakpoint_1) Pass watchpoint condition in
target_remove_watchpoint.
(watchpoint_locations_match): Call
target_can_accel_watchpoint_condition.
* eval.c: Include wrapper.h.
(fetch_subexp_value): Moved from breakpoint.c.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint):
Formatting fix.
(can_use_watchpoint_cond_accel): New function.
(calculate_dvc): Likewise.
(num_memory_accesses): Likewise.
(check_condition): Likewise.
(ppc_linux_can_accel_watchpoint_condition): Likewise
(ppc_linux_insert_watchpoint): Call can_use_watchpoint_cond_accel,
check_condition and calculate_dvc.
(ppc_linux_remove_watchpoint): Likewise.
(_initialize_ppc_linux_nat): Set to_can_accel_watchpoint_condition to
ppc_linux_can_accel_watchpoint_condition
* target.c (debug_to_insert_watchpoint): Add argument for watchpoint
condition.
(debug_to_remove_watchpoint): Likewise.
(debug_to_can_accel_watchpoint_condition): New function.
(update_current_target): Set to_can_accel_watchpoint_condition.
(setup_target_debug): Set to_can_accel_watchpoint_condition.
* target.h: Add opaque declaration for struct expression.
(struct target_ops) <to_insert_watchpoint>,
<to_remove_watchpoint>: Add new arguments to pass the watchpoint
<to_can_accel_watchpoint_condition>: New member.
condition. Update all callers and implementations.
(target_can_accel_watchpoint_condition): New macro.
* value.c (free_value_chain): New function.
* value.h (fetch_subexp_value): New prototype.
(free_value_chain): Likewise.
Add per-operation permission flags.
* target.h (struct target_ops): New method to_set_permissions.
(target_set_permissions): New macro.
(target_insert_breakpoint): Change macro to function.
(target_remove_breakpoint): Ditto.
(target_stop): Ditto.
(may_write_registers): Declare.
(may_write_memory): Declare.
(may_insert_breakpoints): Declare.
(may_insert_tracepoints): Declare.
(may_insert_fast_tracepoints): Declare.
(may_stop): Declare.
* target.c (may_write_registers, may_write_registers_1): New globals.
(may_write_memory, may_write_memory_1): New globals.
(may_insert_breakpoints, may_insert_breakpoints_1): New globals.
(may_insert_tracepoints, may_insert_tracepoints_1): New globals.
(may_insert_fast_tracepoints, may_insert_fast_tracepoints_1): New
globals.
(may_stop, may_stop_1): New global.
(target_xfer_partial): Test for write permission.
(target_store_registers): Ditto.
(target_insert_breakpoint): New function.
(target_remove_breakpoint): New function.
(target_stop): New function.
(_initialize_targets): Add new set/show variables.
(set_write_memory_permission): New function.
(update_target_permissions): New function.
(set_target_permissions): New function.
(update_current_target): Default to_set_permissions.
(_initialize_targets): Use new globals and setter function.
* tracepoint.c (start_tracing): Test for permission.
* inferior.h (update_observer_mode): Declare.
* infrun.c (non_stop_1): Define earlier.
(observer_mode, observer_mode_1): New globals.
(set_observer_mode, show_observer_mode): New functions.
(update_observer_mode): New function.
(_initialize_infrun): Define "set observer" command.
* remote.c (PACKET_QAllow): New optional packet.
(remote_protocol_features): Add QAllow.
(remote_set_permissions): New function.
(remote_start_remote): Call it.
(init_remote_ops): Add it to target vector.
(_initialize_remote): Add config command for QAllow.
* gdb.texinfo (Observer Mode): New section.
(General Query Packets): Document QAllow.
* gdb.base/permissions.exp: New file.
(remote_start_remote): In non-stop mode, update the remote end on
which signals it can silently pass.
(init_remote_ops): Install remote_notice_signals.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
replies.
(remote_start_remote): Update and merge tracepoints and trace
state variables as long as the target supports tracepoints.
(remote_trace_init): Fix prototype.
(remote_download_trace_state_variable): Validate reply.
(remote_trace_set_readonly_regions): Fix prototype.
(remote_trace_start): Fix prototype. Check for empty reply.
(remote_get_trace_status): Small cleanup.
(remote_trace_stop): Fix prototype. Check for empty reply.
(remote_trace_find): Check for empty reply.
(remote_save_trace_data): Validate reply.
(remote_set_disconnected_tracing): Check for empty reply, and
validate reply.
(remote_set_circular_trace_buffer): Ditto.
Pedro Alves <pedro@codesourcery.com>
* tracepoint.h (struct trace_status): New fields disconnected_tracing
and circular_buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing.
* tracepoint.c (trace_status_command): Display target's status for
disconnected tracing and circular buffer.
(disconnect_tracing): Rename from disconnect_or_stop_tracing, add
query for non-disconnected-tracing case, remove the stop_tracing
call.
(tfile_open): Clear disconnected and circular buffer status.
(trace_save): Save disconnected and circular buffer status.
(parse_trace_status): Parse disconnected and circular buffer status,
also recognize disconnected as a stop reason.
* remote.c (remote_set_disconnected_tracing): Only set
QTDisconnected if the remote end supports disconnected tracing.
Warn otherwise, if trying to enable disconnected tracing.
* infcmd.c (detach_command): Update disconnect_tracing call.
* cli/cli-cmds.c (quit_command): Ditto.
* gdb.texinfo (Tracepoint Packets): Describe disconn and circular
trace status fields.
* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops): New method
to_set_circular_trace_buffer.
(target_set_circular_trace_buffer): New macro.
* target.c (update_current_target): Add
to_set_circular_trace_buffer, fix to_set_disconnected_tracing
default behavior.
* remote.c (remote_set_circular_trace_buffer): New function.
(init_remote_ops): Add it to vector.
* tracepoint.h (struct trace_status): New field traceframes_created,
change buffer_size and buffer_free to int.
* tracepoint.c (circular_trace_buffer): New global.
(start_tracing): Send values of disconnected tracing and circular
trace buffer settings.
(set_circular_trace_buffer): New function.
(parse_trace_state): Handle total space and frames created.
(trace_status_command): Display total space and total frames
created.
(trace_save): Write out new status values.
(parse_trace_status): Set traceframe_count, traceframes_created,
buffer_free and buffer_size to -1 by default.
(_initialize_tracepoint): New setshow for circular-trace-buffer.
* NEWS: Mention the circular trace buffer option.
* gdb.texinfo (Starting and Stopping Trace Experiments): Describe
circular-trace-buffer.
(Tracepoint Packets): Describe QTBuffer, and details of the
qTStatus reply.
* gdb.trace/circ.exp: Test circular-trace-buffer.
* gdb.trace/tfile.exp: Update tstatus test.
* remote.c (remote_download_tracepoint): Iterate over locations.
* tracepoint.c (validate_actionline): Ditto.
(encode_actions): Add location argument.
(trace_dump_command): Check all locations to see if stepping
frame.
PR9605
gdb/
* breakpoint.c (insert_bp_location): If inserting the read
watchpoint failed, fallback to an access watchpoint.
(bpstat_check_watchpoint): Stop for read watchpoint triggers even
if the value changed, if not watching the same memory for writes.
(watchpoint_locations_match): Add comment.
(update_global_location_list): Copy the location's watchpoint type.
* i386-nat.c (i386_length_and_rw_bits): It's an internal error to
handle read watchpoints here.
(i386_insert_watchpoint): Read watchpoints aren't supported.
* remote.c (remote_insert_watchpoint): Return 1 for unsupported
packets.
* target.h (target_insert_watchpoint): Update description.
2010-02-22 Pedro Alves <pedro@codesourcery.com>
PR9605
gdbserver/
* i386-low.c (i386_length_and_rw_bits): Throw a fatal error if
handing a read watchpoint.
(i386_low_insert_watchpoint): Read watchpoints aren't supported.
2010-02-22 Pedro Alves <pedro@codesourcery.com>
PR9605
gdb/testsuite/
* gdb.base/watch-read.c, gdb.base/watch-read.exp: New files.
* tracepoint.h (enum trace_stop_reason): New enum.
(struct trace_status): New struct.
(parse_trace_status): Declare.
(struct uploaded_tp): Move here from remote.c,
add fields for actions.
(struct uploaded_tsv): New struct.
* tracepoint.c (tfile_ops): New target vector.
(trace_fd): New global.
(tfile_open): New function.
(tfile_close): New function.
(tfile_files_info): New function.
(tfile_get_trace_status): New function.
(tfile_get_traceframe_address): New function.
(tfile_trace_find): New function.
(tfile_fetch_registers): New function.
(tfile_xfer_partial): New function.
(tfile_get_trace_state_variable_value): New function.
(init_tfile_ops): New function.
(_initialize_tracepoint): Call it, add tfile target.
(trace_status): New global.
(current_trace_status): New function.
(trace_running_p): Remove, change all users to get from
current_trace_status()->running.
(get_trace_status): Remove.
(trace_status_command): Call target_get_trace_status directly,
report more detail including tracing stop reasons.
(trace_find_command): Always allow tfind on a file.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(trace_frames_offset, cur_offset): Declare as off_t.
(trace_regblock_size): Rename from reg_size, update users.
(parse_trace_status): New function.
(tfile_interp_line): New function.
(disconnect_or_stop_tracing): Ensure current trace
status before asking what to do.
(stop_reason_names): New global.
(trace_save_command): New command.
(get_uploaded_tp): Move here from remote.c.
(find_matching_tracepoint): Ditto.
(merge_uploaded_tracepoints): New function.
(parse_trace_status): Use stop_reason_names.
(_initialize_tracepoint): Define tsave command.
* target.h (target_ops): New fields to_save_trace_data,
to_upload_tracepoints, to_upload_trace_state_variables,
to_get_raw_trace_data, change to_get_trace_status
to take a pointer to a status struct.
(target_save_trace_data): New macro.
(target_upload_tracepoints): New macro.
(target_upload_trace_state_variables): New macro.
(target_get_raw_trace_data): New macro.
* target.c (update_current_target): Add new methods, change
signature of to_get_trace_status.
* remote.c (hex2bin): Make globally visible.
(bin2hex): Ditto.
(remote_download_trace_state_variable): Download name also.
(remote_get_trace_status): Update parameter, use
parse_trace_status.
(remote_save_trace_data): New function.
(remote_upload_tracepoints): New function.
(remote_upload_trace_state_variables): New function.
(remote_get_raw_trace_data): New function.
(remote_start_remote): Use them.
(_initialize_remote_ops): Add operations.
* ax-gdb.c: Include breakpoint.h.
* breakpoint.c (create_tracepoint_from_upload): Use
break_command_really, return tracepoint, warn about unimplemented
parts.
* NEWS: Mention trace file addition.
* gdb.texinfo (Trace Files): New section.
(Tracepoint Packets): Document QTSave and qTBuffer.
(Trace File Format): New appendix.
* generic/gdbtk-bp.c (gdb_trace_status): Use current_trace_status.
* gdb.trace/tfile.c: New file.
* gdb.trace/tfile.exp: New file.
* target.h (enum trace_find_type): New enum.
(struct target_ops): New fields to_trace_init,
to_download_tracepoint, to_download_trace_state_variable,
to_trace_set_readonly_regions, to_trace_start, to_get_trace_status,
to_trace_stop, to_trace_find, to_get_trace_state_variable_value,
to_set_disconnected_tracing.
(target_trace_init): New macro.
(target_download_tracepoint): New macro.
(target_download_trace_state_variable): New macro.
(target_trace_start): New macro.
(target_trace_set_readonly_regions): New macro.
(target_get_trace_status): New macro.
(target_trace_stop): New macro.
(target_trace_find): New macro.
(target_get_trace_state_variable_value): New macro.
(target_set_disconnected_tracing): New macro.
* target.c (update_current_target): Inherit and set defaults for
tracepoint operations.
* tracepoint.c (default_collect): Make globally visible.
(target_is_remote): Remove, along with all calls.
(tvariables_info): Call target_get_trace_state_variable_value.
(remote_set_transparent_ranges): Remove.
(trace_start_command): Call target_trace_init,
target_download_tracepoint, etc.
(download_tracepoint): Remove.
(trace_stop_command): Simplify.
(stop_tracing): Call target_trace_stop.
(get_trace_status): Call target_get_trace_status.
(trace_status_command): Add case for targets that cannot trace.
(finish_tfind_command): Change to take numerical arguments, call
target_trace_find.
(trace_find_command): Update call to finish_tfind_command.
(trace_find_pc_command): Ditto.
(trace_find_tracepoint_command): Ditto.
(trace_find_line_command): Ditto.
(trace_find_range_command): Ditto.
(trace_find_outside_command): Ditto.
(set_disconnected_tracing_value): Call
target_set_disconnected_tracing.
* remote.c: Add protocol encoding bits from tracepoint.c.
(trace_error): Move from tracepoint.c.
(remote_get_noisy_reply): Ditto.
(free_actions_list_cleanup_wrapper): Ditto.
(free_actions_list): Ditto.
(remote_trace_init): New function.
(remote_download_tracepoint): New function.
(remote_download_trace_state_variable): New function.
(remote_trace_set_readonly_regions): New function.
(remote_trace_start): New function.
(remote_get_trace_status): New function.
(remote_trace_stop): New function.
(remote_trace_find): New function.
(remote_download_trace_state_variable): New function.
(remote_set_disconnected_tracing): New function.
(init_remote_ops): Add tracepoint operations.
* infcmd.c (detach_command): Ask whether to stop tracing.
* cli/cli-cmds.c (quit_command): Ditto.
* breakpoint.h (struct breakpoint): New field number_on_target.
* breakpoint.c (create_tracepoint_from_upload): New function.
(get_tracepoint_by_number_on_target): New function.
* remote.c (struct remote): New field disconnected_tracing.
(remote_disconnected_tracing_feature): New function.
(remote_protocol_features): Add DisconnectedTracing.
(struct uploaded_tp): New struct.
(uploaded_tps): New global.
(get_uploaded_tp): New function.
(find_matching_tracepoint): New function.
(remote_get_tracing_state): New function.
(remote_start_remote): Call it.
* tracepoint.c (disconnected_tracing): New global.
(trace_start_command): Initialize number_on_target.
(stop_tracing): New function, split out from...
(trace_stop_command): Call stop_tracing.
(get_trace_status): New function, split out from...
(trace_status_command): Call get_trace_status, add info on
disconnection behavior.
(disconnect_or_stop_tracing): New function.
(finish_tfind_command): Translate from number on target.
(trace_find_tracepoint_command): Translate to number on target.
(send_disconnected_tracing_value): New function.
(set_disconnected_tracing): New function.
(_initialize_tracepoint): Add disconnected-tracing variable.
* NEWS: Mention disconnected tracing.
* gdb.texinfo (Starting and Stopping Trace Experiments): Document
disconnected tracing.
(Tracepoint Packets): Document new protocol.
Maxim Kuvyrkov <maxim@codesourcery.com>
* remote-fileio.c (remote_fileio_request): Send Ctrl-C if it is
pending.
* remote-fileio.h: Update the prototype for remote_fileio_request.
* remote.c (struct remote_state): Add ctrlc_pending_p.
(remote_open_1): Clear ctrlc_pending_p.
(remote_stop_as): Set ctrlc_pending_p to 1.
(remote_wait_as): Pass ctrlc_pending_p to remote_fileio_request.
* remote.c (interrupt_sequence_control_c)
(interrupt_sequence_break, interrupt_sequence_break_g)
(interrupt_sequence_modes): New constants.
(interrupt_sequence_mode, interrupt_on_connect): New variable.
(show_interrupt_sequence): New function.
(set_remotebreak, show_remotebreak): New function.
(send_interrupt_sequence): New function.
(remote_start_remote): Call send_interrupt_sequence if
interrupt_on_connect is true.
(remote_stop_as): Call send_interrupt_sequence.
(_initialize_remote): Add interrupt-sequence and interrupt-on-connect,
modify remotebreak to call set_remotebreak and show_remotebreak.
* NEWS: Add entry for "set/show remote interrupt-sequence" and
"set/show remote interrupt-on-connect". Also mention that
"set/show remotebreak" is now deprecated.
gdb/doc/:
* gdb.texinfo (Remote Configuration): Add "set/show remote
interrupt-sequence" and "set/show remote interrupt-on-connect" command.
Stan Shebs <stan@codesourcery.com>
Add base multi-executable/process support to GDB.
gdb/
* Makefile.in (SFILES): Add progspace.c.
(COMMON_OBS): Add progspace.o.
* progspace.h: New.
* progspace.c: New.
* breakpoint.h (struct bp_target_info) <placed_address_space>: New
field.
(struct bp_location) <pspace>: New field.
(struct breakpoint) <pspace>: New field.
(bpstat_stop_status, breakpoint_here_p)
(moribund_breakpoint_here_p, breakpoint_inserted_here_p)
(regular_breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p, breakpoint_thread_match)
(set_default_breakpoint): Adjust prototypes.
(remove_breakpoints_pid, breakpoint_program_space_exit): Declare.
(insert_single_step_breakpoint, deprecated_insert_raw_breakpoint):
Adjust prototypes.
* breakpoint.c (executing_startup): Delete.
(default_breakpoint_sspace): New.
(breakpoint_restore_shadows): Skip if the address space doesn't
match.
(update_watchpoint): Record the frame's program space in the
breakpoint location.
(insert_bp_location): Record the address space in target_info.
Adjust to pass the symbol space to solib_name_from_address.
(breakpoint_program_space_exit): New.
(insert_breakpoint_locations): Switch the symbol space and thread
when inserting breakpoints. Don't insert breakpoints in a vfork
parent waiting for vfork done if we're not attached to the vfork
child.
(remove_breakpoints_pid): New.
(reattach_breakpoints): Switch to a thread of PID. Ignore
breakpoints of other symbol spaces.
(create_internal_breakpoint): Store the symbol space in the sal.
(create_longjmp_master_breakpoint): Iterate over all symbol
spaces.
(update_breakpoints_after_exec): Ignore breakpoints for other
symbol spaces.
(remove_breakpoint): Rename to ...
(remove_breakpoint_1): ... this. Pass the breakpoints symbol
space to solib_name_from_address.
(remove_breakpoint): New.
(mark_breakpoints_out): Ignore breakpoints from other symbol
spaces.
(breakpoint_init_inferior): Ditto.
(breakpoint_here_p): Add an address space argument and adjust to
use breakpoint_address_match.
(moribund_breakpoint_here_p): Ditto.
(regular_breakpoint_inserted_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(software_breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
(bpstat_check_location): Ditto.
(bpstat_stop_status): Ditto.
(print_breakpoint_location): If there's a location to print,
switch the current symbol space.
(print_one_breakpoint_location): Add `allflag' argument.
(print_one_breakpoint): Ditto. Adjust.
(do_captured_breakpoint_query): Adjust.
(breakpoint_1): Adjust.
(breakpoint_has_pc): Also match the symbol space.
(describe_other_breakpoints): Add a symbol space argument and
adjust.
(set_default_breakpoint): Add a symbol space argument. Set
default_breakpoint_sspace.
(breakpoint_address_match): New.
(check_duplicates_for): Add an address space argument, and adjust.
(set_raw_breakpoint): Record the symbol space in the location and
in the breakpoint.
(set_longjmp_breakpoint): Skip longjmp master breakpoints from
other symbol spaces.
(remove_thread_event_breakpoints, remove_solib_event_breakpoints)
(disable_breakpoints_in_shlibs): Skip breakpoints from other
symbol spaces.
(disable_breakpoints_in_unloaded_shlib): Match symbol spaces.
(create_catchpoint): Set the symbol space in the sal.
(disable_breakpoints_before_startup): Skip breakpoints from other
symbol spaces. Set executing_startup in the current symbol space.
(enable_breakpoints_after_startup): Clear executing_startup in the
current symbol space. Skip breakpoints from other symbol spaces.
(clone_momentary_breakpoint): Also copy the symbol space.
(add_location_to_breakpoint): Set the location's symbol space.
(bp_loc_is_permanent): Switch thread and symbol space.
(create_breakpoint): Adjust.
(expand_line_sal_maybe): Expand comment to mention symbol spaces.
Switch thread and symbol space when reading memory.
(parse_breakpoint_sals): Set the symbol space in the sal.
(break_command_really): Ditto.
(skip_prologue_sal): Switch and space.
(resolve_sal_pc): Ditto.
(watch_command_1): Record the symbol space in the sal.
(create_ada_exception_breakpoint): Adjust.
(clear_command): Adjust. Match symbol spaces.
(update_global_location_list): Use breakpoint_address_match.
(breakpoint_re_set_one): Switch thread and space.
(breakpoint_re_set): Save symbol space.
(breakpoint_re_set_thread): Also reset the symbol space.
(deprecated_insert_raw_breakpoint): Add an address space argument.
Adjust.
(insert_single_step_breakpoint): Ditto.
(single_step_breakpoint_inserted_here_p): Ditto.
(clear_syscall_counts): New.
(_initialize_breakpoint): Install it as inferior_exit observer.
* exec.h: Include "progspace.h".
(exec_bfd, exec_bfd_mtime): New defines.
(exec_close): Declare.
* exec.c: Include "gdbthread.h" and "progspace.h".
(exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete.
(using_exec_ops): New.
(exec_close_1): Rename to exec_close, and make public.
(exec_close): Rename to exec_close_1, and adjust all callers. Add
description. Remove target sections and close executables from
all program spaces.
(exec_file_attach): Add comment.
(add_target_sections): Check on `using_exec_ops' to check if the
target should be pushed.
(remove_target_sections): Only unpush the target if there are no
more target sections in any symbol space.
* gdbcore.h: Include "exec.h".
(exec_bfd, exec_bfd_mtime): Remove declarations.
* frame.h (get_frame_program_space, get_frame_address_space)
(frame_unwind_program_space): Declare.
* frame.c (struct frame_info) <pspace, aspace>: New fields.
(create_sentinel_frame): Add program space argument. Set the
pspace and aspace fields of the frame object.
(get_current_frame, create_new_frame): Adjust.
(get_frame_program_space): New.
(frame_unwind_program_space): New.
(get_frame_address_space): New.
* stack.c (print_frame_info): Adjust.
(print_frame): Use the frame's program space.
* gdbthread.h (any_live_thread_of_process): Declare.
* thread.c (any_live_thread_of_process): New.
(switch_to_thread): Switch the program space as well.
(restore_selected_frame): Don't warn if trying to restore frame
level 0.
* inferior.h: Include "progspace.h".
(detach_fork): Declare.
(struct inferior) <removable, aspace, pspace>
<vfork_parent, vfork_child, pending_detach>
<waiting_for_vfork_done>: New fields.
<terminal_info>: Remove field.
<data, num_data>: New fields.
(register_inferior_data, register_inferior_data_with_cleanup)
(clear_inferior_data, set_inferior_data, inferior_data): Declare.
(exit_inferior, exit_inferior_silent, exit_inferior_num_silent)
(inferior_appeared): Declare.
(find_inferior_pid): Typo.
(find_inferior_id, find_inferior_for_program_space): Declare.
(set_current_inferior, save_current_inferior, prune_inferiors)
(number_of_inferiors): Declare.
(inferior_list): Declare.
* inferior.c: Include "gdbcore.h" and "symfile.h".
(inferior_list): Make public.
(delete_inferior_1): Always delete thread silently.
(find_inferior_id): Make public.
(current_inferior_): New.
(current_inferior): Use it.
(set_current_inferior): New.
(restore_inferior): New.
(save_current_inferior): New.
(free_inferior): Free the per-inferior data.
(add_inferior_silent): Allocate per-inferior data.
Call inferior_appeared.
(delete_threads_of_inferior): New.
(delete_inferior_1): Adjust interface to take an inferior pointer.
(delete_inferior): Adjust.
(delete_inferior_silent): Adjust.
(exit_inferior_1): New.
(exit_inferior): New.
(exit_inferior_silent): New.
(exit_inferior_num_silent): New.
(detach_inferior): Adjust.
(inferior_appeared): New.
(discard_all_inferiors): Adjust.
(find_inferior_id): Make public. Assert pid is not zero.
(find_inferior_for_program_space): New.
(have_inferiors): Check if we have any inferior with pid not zero.
(have_live_inferiors): Go over all pushed targets looking for
process_stratum.
(prune_inferiors): New.
(number_of_inferiors): New.
(print_inferior): Add executable column. Print vfork parent/child
relationships.
(inferior_command): Adjust to cope with not running inferiors.
(remove_inferior_command): New.
(add_inferior_command): New.
(clone_inferior_command): New.
(struct inferior_data): New.
(struct inferior_data_registration): New.
(struct inferior_data_registry): New.
(inferior_data_registry): New.
(register_inferior_data_with_cleanup): New.
(register_inferior_data): New.
(inferior_alloc_data): New.
(inferior_free_data): New.
(clear_inferior_data): New.
(set_inferior_data): New.
(inferior_data): New.
(initialize_inferiors): New.
(_initialize_inferiors): Register "add-inferior",
"remove-inferior" and "clone-inferior" commands.
* objfiles.h: Include "progspace.h".
(struct objfile) <pspace>: New field.
(symfile_objfile, object_files): Don't declare.
(ALL_PSPACE_OBJFILES): New.
(ALL_PSPACE_OBJFILES_SAFE): New.
(ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust.
(ALL_PSPACE_SYMTABS): New.
(ALL_PRIMARY_SYMTABS): Adjust.
(ALL_PSPACE_PRIMARY_SYMTABS): New.
(ALL_PSYMTABS): Adjust.
(ALL_PSPACE_PSYMTABS): New.
* objfiles.c (object_files, symfile_objfile): Delete.
(struct objfile_sspace_info): New.
(objfiles_pspace_data): New.
(objfiles_pspace_data_cleanup): New.
(get_objfile_pspace_data): New.
(objfiles_changed_p): Delete.
(allocate_objfile): Set the objfile's program space. Adjust to
reference objfiles_changed_p in pspace data.
(free_objfile): Adjust to reference objfiles_changed_p in pspace
data.
(objfile_relocate): Ditto.
(update_section_map): Add pspace argument. Adjust to iterate over
objfiles in the passed in pspace.
(find_pc_section): Delete sections and num_sections statics.
Adjust to refer to program space's objfiles_changed_p. Adjust to
refer to sections and num_sections store in the objfile's pspace
data.
(objfiles_changed): Adjust to reference objfiles_changed_p in
pspace data.
(_initialize_objfiles): New.
* linespec.c (decode_all_digits, decode_dollar): Set the sal's
program space.
* source.c (current_source_pspace): New.
(get_current_source_symtab_and_line): Set the sal's program space.
(set_current_source_symtab_and_line): Set current_source_pspace.
(select_source_symtab): Ditto. Use ALL_OBJFILES.
(forget_cached_source_info): Iterate over all program spaces.
* symfile.c (clear_symtab_users): Adjust.
* symmisc.c (print_symbol_bcache_statistics): Iterate over all
program spaces.
(print_objfile_statistics): Ditto.
(maintenance_print_msymbols): Ditto.
(maintenance_print_objfiles): Ditto.
(maintenance_info_symtabs): Ditto.
(maintenance_info_psymtabs): Ditto.
* symtab.h (SYMTAB_PSPACE): New.
(struct symtab_and_line) <pspace>: New field.
* symtab.c (init_sal): Clear the sal's program space.
(find_pc_sect_symtab): Set the sal's program space. Switch thread
and space.
(append_expanded_sal): Add program space argument. Iterate over
all program spaces.
(expand_line_sal): Iterate over all program spaces. Switch
program space.
* target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New.
(struct target_ops) <to_thread_address_space>: New field.
(target_thread_address_space): Define.
* target.c (target_detach): Only remove breakpoints from the
inferior we're detaching.
(target_thread_address_space): New.
* defs.h (initialize_progspace): Declare.
* top.c (gdb_init): Call it.
* solist.h (struct so_list) <sspace>: New field.
* solib.h (struct program_space): Forward declare.
(solib_name_from_address): Adjust prototype.
* solib.c (so_list_head): Replace with a macro referencing the
program space.
(update_solib_list): Set the so's program space.
(solib_name_from_address): Add a program space argument and adjust.
* solib-svr4.c (struct svr4_info) <pid>: Delete field.
<interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low>
<interp_plt_sect_high>: New fields.
(svr4_info_p, svr4_info): Delete.
(solib_svr4_sspace_data): New.
(get_svr4_info): Rewrite.
(svr4_sspace_data_cleanup): New.
(open_symbol_file_object): Adjust.
(svr4_default_sos): Adjust.
(svr4_fetch_objfile_link_map): Adjust.
(interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low)
(interp_plt_sect_high): Delete.
(svr4_in_dynsym_resolve_code): Adjust.
(enable_break): Adjust.
(svr4_clear_solib): Revert bit that removed the svr4_info here,
and reinstate clearing debug_base, debug_loader_offset_p,
debug_loader_offset and debug_loader_name.
(_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't
install an inferior_exit observer anymore.
* printcmd.c (struct display) <pspace>: New field.
(display_command): Set the display's sspace.
(do_one_display): Match the display's sspace.
(display_uses_solib_p): Ditto.
* linux-fork.c (detach_fork): Moved to infrun.c.
(_initialize_linux_fork): Moved "detach-on-fork" command to
infrun.c.
* infrun.c (detach_fork): Moved from linux-fork.c.
(proceed_after_vfork_done): New.
(handle_vfork_child_exec_or_exit): New.
(follow_exec_mode_replace, follow_exec_mode_keep)
(follow_exec_mode_names, follow_exec_mode_string)
(show_follow_exec_mode_string): New.
(follow_exec): New. Reinstate the mark_breakpoints_out call.
Remove shared libraries before attaching new executable. If user
wants to keep the inferior, keep it.
(displaced_step_fixup): Adjust to pass an address space to the
breakpoints module.
(resume): Ditto.
(clear_proceed_status): In all-stop mode, always clear the proceed
status of all threads.
(prepare_to_proceed): Adjust to pass an address space to the
breakpoints module.
(proceed): Ditto.
(adjust_pc_after_break): Ditto.
(handle_inferior_event): When handling a process exit, switch the
program space to the inferior's that had exited. Call
handle_vfork_child_exec_or_exit. Adjust to pass an address space
to the breakpoints module. In non-stop mode, when following a
fork and detach-fork is off, also resume the other branch. Handle
TARGET_WAITKIND_VFORK_DONE. Set the program space in sals.
(normal_stop): Prune inferiors.
(_initialize_infrun): Install the new "follow-exec-mode" command.
"detach-on-fork" moved here.
* regcache.h (get_regcache_aspace): Declare.
* regcache.c (struct regcache) <aspace>: New field.
(regcache_xmalloc): Clear the aspace.
(get_regcache_aspace): New.
(regcache_cpy): Copy the aspace field.
(regcache_cpy_no_passthrough): Ditto.
(get_thread_regcache): Fetch the thread's address space from the
target, and store it in the regcache.
* infcall.c (call_function_by_hand): Set the sal's pspace.
* arch-utils.c (default_has_shared_address_space): New.
* arch-utils.h (default_has_shared_address_space): Declare.
* gdbarch.sh (has_shared_address_space): New.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c: Include auxv.h, target.h, elf/common.h.
(linux_has_shared_address_space): New.
(_initialize_linux_tdep): Declare.
* arm-tdep.c (arm_software_single_step): Pass the frame's address
space to insert_single_step_breakpoint.
* arm-linux-tdep.c (arm_linux_software_single_step): Pass the
frame's pspace to breakpoint functions.
* cris-tdep.c (crisv32_single_step_through_delay): Ditto.
(cris_software_single_step): Ditto.
* mips-tdep.c (deal_with_atomic_sequence): Add frame argument.
Pass the frame's pspace to breakpoint functions.
(mips_software_single_step): Adjust.
(mips_single_step_through_delay): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* solib-irix.c (enable_break): Adjust to pass the current frame's
address space to breakpoint functions.
* sparc-tdep.c (sparc_software_single_step): Ditto.
* spu-tdep.c (spu_software_single_step): Ditto.
* alpha-tdep.c (alpha_software_single_step): Ditto.
* record.c (record_wait): Adjust to pass an address space to the
breakpoints module.
* fork-child.c (fork_inferior): Set the new inferior's program and
address spaces.
* inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program
and address spaces.
(inf_ptrace_attach): Set the inferior's program and address spaces.
* linux-nat.c: Include "solib.h".
(linux_child_follow_fork): Manage parent and child's program and
address spaces. Clone the parent's program space if necessary.
Don't wait for the vfork to be done here. Refuse to resume if
following the vfork parent while leaving the child stopped.
(resume_callback): Don't resume a vfork parent.
(linux_nat_resume): Also check for pending events in the
lp->waitstatus field.
(linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE
events to the core.
(stop_wait_callback): Don't wait for SIGSTOP on vfork parents.
(cancel_breakpoint): Adjust.
* linux-thread-db.c (thread_db_wait): Don't remove thread event
breakpoints here.
(thread_db_mourn_inferior): Don't mark breakpoints out here.
Remove thread event breakpoints after mourning.
* corelow.c: Include progspace.h.
(core_open): Set the inferior's program and address spaces.
* remote.c (remote_add_inferior): Set the new inferior's program
and address spaces.
(remote_start_remote): Update address spaces.
(extended_remote_create_inferior_1): Don't init the thread list if
we already debugging other inferiors.
* darwin-nat.c (darwin_attach): Set the new inferior's program and
address spaces.
* gnu-nat.c (gnu_attach): Ditto.
* go32-nat.c (go32_create_inferior): Ditto.
* inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto.
* monitor.c (monitor_open): Ditto.
* nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto.
* procfs.c (do_attach): Ditto.
* windows-nat.c (do_initial_windows_stuff): Ditto.
* inflow.c (inferior_process_group)
(terminal_init_inferior_with_pgrp, terminal_inferior,
(terminal_ours_1, inflow_inferior_exit, copy_terminal_info)
(child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust
to use per-inferior data instead of inferior->terminal_info.
(inflow_inferior_data): New.
(inflow_new_inferior): Delete.
(inflow_inferior_data_cleanup): New.
(get_inflow_inferior_data): New.
* mi/mi-interp.c (mi_new_inferior): Rename to...
(mi_inferior_appeared): ... this.
(mi_interpreter_init): Adjust.
* tui/tui-disasm.c: Include "progspace.h".
(tui_set_disassem_content): Pass an address space to
breakpoint_here_p.
* NEWS: Mention multi-program debugging support. Mention new
commands "add-inferior", "clone-inferior", "remove-inferior",
"maint info program-spaces", and new option "set
follow-exec-mode".
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* observer.texi (new_inferior): Rename to...
(inferior_appeared): ... this.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/testsuite/
* gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork".
* gdb.base/foll-exec.exp: Adjust to expect a process id before
"Executing new program".
* gdb.base/foll-fork.exp: Adjust to spell out "follow-fork".
* gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being
left listed after having been killed.
* gdb.base/attach.exp: Adjust to spell out "symbol-file".
* gdb.base/maint.exp: Adjust test.
* Makefile.in (ALL_SUBDIRS): Add gdb.multi.
* gdb.multi/Makefile.in: New.
* gdb.multi/base.exp: New.
* gdb.multi/goodbye.c: New.
* gdb.multi/hangout.c: New.
* gdb.multi/hello.c: New.
* gdb.multi/bkpt-multi-exec.c: New.
* gdb.multi/bkpt-multi-exec.exp: New.
* gdb.multi/crashme.c: New.
2009-10-19 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
gdb/doc/
* gdb.texinfo (Inferiors): Rename node to ...
(Inferiors and Programs): ... this. Mention running multiple
programs in the same debug session.
<info inferiors>: Mention the new 'Executable' column if "info
inferiors". Update examples. Document the "add-inferior",
"clone-inferior", "remove-inferior" and "maint info
program-spaces" commands.
(Process): Rename node to...
(Forks): ... this. Document "set|show follow-exec-mode".
* remote.c (PACKET_bc, PACKET_bs): New enums.
(remote_protocol_features): Add ReverseStep, ReverseContinue.
(remote_resume): Check for reverse capability.
(_initialize_remote): Add packet config for "bs" and "bc" packets.
* NEWS (new options): Mention set/show for "bs" and "bc" packets.
(update_global_location_list): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist and
target_supports_multi_process.
* dicos-tdep.c (dicos_init_abi): Set
gdbarch_has_global_breakpoints.
* gdbarch.sh (has_global_solist): Update comment.
(has_global_breakpoints): New.
* remote.c (remote_start_remote): Use
gdbarch_has_global_breakpoints instead of
gdbarch_has_global_solist.
* target.c (target_detach): Use gdbarch_has_global_breakpoints
instead of gdbarch_has_global_solist.
* infcmd.c (attach_command): Use gdbarch_has_global_solist instead
of target_supports_multi_process.
if the thread's ptid without a thread id field is in the list
before calling thread_change_ptid.
(extended_remote_attach_1): In non-stop mode, do not rely on
querying the current thread, instead, query the thread list, and
select the first thread of the process.
* gdbthread.h (first_thread_of_process): Declare.
* thread.c (first_thread_of_process): Define.
target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
gdb/
* remote.c (PACKET_qAttached): New.
(remote_query_attached): New.
(remote_add_inferior): Add new `attached' argument. Handle it.
(remote_notice_new_inferior, remote_start_remote): Adjust to pass
-1 to remote_add_inferior in new parameter.
(extended_remote_attach_1): Adjust to pass 1 to
remote_add_inferior in the new parameter.
(extended_remote_create_inferior_1): Adjust to pass 0 to
remote_add_inferior in the new parameter.
(_initialize_remote): Add "set/show remote query-attached-packet"
commands.
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/gdbserver/
* server.c (handle_query): Handle "qAttached".
2009-03-14 Pedro Alves <pedro@codesourcery.com>
gdb/doc/
* gdb.texinfo (Remote Configuration): Document query-attached.
(General Query Packets): Document qAttached.
* infcmd.c (notice_new_inferior): New.
* remote.c (remote_add_inferior, remote_add_thread): New.
(notice_new_inferiors): Rename to...
(remote_notice_new_inferior): ... this. Add RUNNING argument.
Use remote_add_thread instead of add_thread, passing it the
RUNNING argument. Add an inferior with remote_add_inferior. If
we just learned about an inferior, call notice_new_inferior.
(record_currthread): Adjust.
(remote_threads_info): Adjust to use remote_notice_new_inferior.
(remote_start_remote, extended_remote_attach_1): Use remote_add_inferior.
(process_stop_reply): Adjust. Call remote_notice_new_inferior
after handling expedited registers and watchpoint state.
(extended_remote_create_inferior_1): Use remote_add_inferior.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
(init_remote_ops): Don't register it.
* target.c (target_get_osdata): Don't check for target_can_run.
Instead any target that has already been pushed, otherwise
fallback to the default run target..
* remote.c (remote_read_description_p): New function.
(remote_start_remote): Try to fetch the target description
before adding shared libraries. Try again later if the
target is running but stopped.
(remote_open_1): Mark extended targets as exited by default.
(remote_read_description): Check target_has_execution.
(putpkt_binary, read_frame, getpkt_or_notif_sane_1): Use it. Make
sure debug output printing a packet buffer goes through a single
fprintf_unfiltered call.
* utils.c (vfprintf_unfiltered): If outputting timestamps, end
output with a newline if it wasn't going to already.
fetch libraries and insert breakpoints after connecting.
* infcmd.c (post_create_inferior): If the solist is shared between
inferiors, no need to refetch it on every new inferior.
(detach_command): If the shared library list is shared between
inferiors, then don't clear it on every inferior detach.
* gdbarch.sh (has_global_solist): New.
* i386-dicos-tdep.c (i386_dicos_init_abi): Set
gdbarch_has_global_solist.
* target.c (target_pre_inferior): If the shared library list is
shared between inferiors, then don't clear it here, neither
invalidate the memory regions or clear the target description.
(target_detach): If the shared library list is shared between
inferiors, then don't remove breakpoints from the target here.
(target_disconnect): Comment.
* solib.c (update_solib_list): Check for null_ptid.
* breakpoint.c (insert_breakpoints, update_global_location_list):
If the shared library list is shared between inferiors, insert
breakpoints even if there's no execution.
(breakpoint_init_inferior): If the shared library list is shared
between inferiors, don't delete breakpoints or mark them
uninserted here.
* gdbarch.c, gdbarch.h: Regenerate.
field.
(target_supports_multi_process): New define.
* target.c (update_current_target): Inherit and de_fault
to_supports_multi_process.
* infcmd.c (attach_command): Allow attaching to multiple processes
if the target supports it.
(detach_command): If the target claims there is still execution,
don't clear the thread list.
* remote.c (remote_supports_multi_process): New.
(init_remote_ops): Register remote_supports_multi_process.
* remote.c (pending_stop_reply): New.
(struct remote_state) <non_stop_aware, support_vCont_t>: New
fields.
(remote_async_inferior_event_token)
(remote_async_get_pending_events_token): New.
(notice_new_inferiors): New, abstracted out from record_currthread.
(record_currthread): Call it.
(remote_threads_info): Default threads to running in non-stop
mode. In non-stop mode, only qfThreadInfo is supported.
(remote_close): Discard all pending stop_replies. Close the event
sources.
(set_stop_requested_callback): New.
(remote_start_remote): Implement non-stop mode startup. In
all-stop, don't clear the thread list here.
(remote_non_stop_feature): New.
(remote_protocol_features): Add a "QNonStop" feature.
(remote_open_1): Clear cached_wait_status and non_stop_aware.
Clear the thread list here.
(remote_detach_1): Discard pending stop replies of the process we
detached from.
(extended_remote_attach_1): Implement non-stop mode.
(remote_vcont_probe): Recognize `vCont;t'.
(remote_vcont_resume): Implement non-stop mode.
(remote_resume): Don't set waiting_for_stop_reply in non-stop
mode.
(remote_stop_ns): New.
(remote_stop): Rename to ...
(remote_stop_as): ... this. If we have a cached wait status,
don't bother interrupting the remote.
(remote_stop): Reimplement as wrapper around remote_stop_as and
remote_stop_ns.
(interrupt_query): Don't query in async mode.
(struct cached_reg, cahed_reg_t): New.
(struct stop_reply): New.
(stop_reply_queue): New.
(stop_reply_xmalloc, stop_reply_xfree)
(discard_pending_stop_replies, do_stop_reply_xfree)
(queued_stop_reply, push_stop_reply, peek_stop_reply)
(remote_parse_stop_reply, remote_get_pending_stop_replies)
(process_stop_reply): New.
(remote_wait_ns): New.
(remote_wait_as): Use remote_parse_stop_reply. Invalidate the
notion of current general thread is a process exit was reported.
(remote_wait): Call remote_wait_ns in non-stop mode.
(handle_notification): New.
(putpkt_binary): Handle notifications. Don't care for
waiting_for_stop_reply in non-stop mode.
(getpkt_sane): Rename to ...
(getpkt_or_notif_sane_1): ... this. Add `expecting_notif'
argument. Handle it. Handle notifications.
(getpkt_sane): Reimplement as wrapper around getpkt_or_notif_sane_1.
(getpkt_or_notif_sane): New.
(select_new_thread_callback): Check for exited state instead of
comparing the ptid against minus_one_ptid.
(extended_remote_create_inferior_1): Query the remote about the
current thread.
(remote_supports_non_stop): New.
(init_remote_ops): Register it.
(remote_async_inferior_event_handler): New.
(remote_async_get_pending_events_handler): New.
* infcmd.c (proceed_thread_callback): Comment.
(proceed_after_attach_callback, proceed_after_attach): New.
(attach_command_post_wait): In background attach, resume all
threads, but only if they are unsignalled, and not explicitly
stopped. In foreground attach, in non-stop mode, make sure to
stop all threads of the just attached to process.
(attach_command): In non-stop mode: If doing a background attach,
stop at least one thread. If a foreground attach, stop all
threads.
Target interface for reverse debugging.
* target.h (enum target_waitkind):
Add new wait event, TARGET_WAITKIND_NO_HISTORY.
(struct target_ops): New method to_can_execute_reverse.
(target_can_execute_reverse): New macro.
* target.c (update_current_target): Inherit to_can_execute_reverse.
Remote interface for reverse debugging.
* remote.c (remote_can_execute_reverse): New target method.
(remote_resume): Check for reverse exec direction, and send
appropriate command to target.
(remote_wait_as): Check target response for NO_HISTORY status.
Also check for empty reply (target doesn't understand "bs" or "bc).
(remote_vcont_resume): Jump out if attempting reverse execution.
Event handling interface for reverse debugging.
* infrun.c (execution_direction): New state variable.
(enum inferior_stop_reason): Add NO_HISTORY reason.
(handle_inferior_event): Handle TARGET_WAITKIND_NO_HISTORY.
Handle stepping over a function call in reverse.
Handle stepping thru a line range in reverse.
Handle setting a step-resume breakpoint in reverse.
Handle stepping into a function in reverse.
Handle stepping between line ranges in reverse.
(print_stop_reason): Print reason for NO_HISTORY.
(step_into_function): Rename to handle_step_into_function.
(handle_step_into_function_backward): New function.
(set_exec_direction_func, show_exec_direction_func): New funcs.
(proceed): No need to singlestep over a breakpoint
when resuming in reverse.
* inferior.h (enum exec_direction_kind): New enum.
(execution_direction): Export new execution state variable.
* breakpoint.c (make_breakpoint_silent): New function.
* breakpoint.h (make_breakpoint_silent): Export.
* infcmd.c (finish_command): Check for reverse exec direction.
(finish_backward): New function, handle finish cmd in reverse.
User interface for reverse execution.
* Makefile.in (reverse.c): New file.
* reverse.c: New file. User interface for reverse execution.
loop. Always restore the SIGINT handler. Discard all inferiors
here.
(remote_detach_1, remote_disconnect): Don't unregister the file
descriptor from the event loop here.
(interrupt_query, readchar, getpkt_sane): Pop the target instead
of morning the current inferior.
(remote_kill): Don't unregister the file descriptor from the event
loop here.
(remote_mourn_1): Don't discard inferiors here.
(remote_wait_as): ... this. Don't loop here. If the remote
didn't stop, return TARGET_WAITKIND_IGNORE.
(remote_wait): New, reimplemented on top of remote_wait_as.
querying supported features, activating noack mode, finding the
target description, enabling extended remote, and checking remote
symbols from here ...
(remote_start_remote): ... to here.
(remote_open_1): Don't pop the target if it is already gone.
* target.c (unpush_target): Check for the dummy target.
field.
(remote_open_1): Clear waiting_for_stop_reply.
(remote_resume): Set waiting_for_stop_reply.
(remote_wait): Clear or set waiting_for_stop_reply accordingly.
(putpkt_binary): If we're in async mode and waiting for a stop
reply, bail out with an error.
(extended_remote_mourn_1): Clear waiting_for_stop_reply.
* inferior.h (attach_flag): Delete.
(inferior_process): Declare.
* solib.c (update_solib_list): Adjust.
* gnu-nat.c (gnu_create_inferior, gnu_attach): Adjust.
* inf-ptrace.c (inf_ptrace_detach): Adjust.
(inf_ptrace_files_info): Get it from the current inferior.
* inf-ttrace.c (inf_ttrace_attach): Adjust.
(inf_ttrace_files_info): Get it from the current
inferior.
* inflow.c (terminal_inferior, terminal_ours_1, set_sigint_trap)
(clear_sigint_trap): Get it from the current process.
* remote.c (extended_remote_attach_1)
(extended_remote_create_inferior_1): Adjust.
* top.c (quit_confirm, quit_target): Get it from the current inferior.
* procfs.c (do_detach): Adjust.
(procfs_wait): Get it from the event inferior.
(procfs_files_info): Get it from the current inferior.
* nto-procfs.c (procfs_files_info): Likewise.
(procfs_attach): Adjust. Set the attach_flag here.
(do_attach): Don't set it here.
(procfs_detach): Don't clear it.
(procfs_mourn_inferior): Don't clear it.
* solib-osf.c (osf_solib_create_inferior_hook): Adjust.
* target.c (attach_flag): Delete.
(generic_mourn_inferior): Don't clear it.
* win32-nat.c (get_win32_debug_event): Get it from the event
process.
(do_initial_win32_stuff): Add attaching argument. Set attach_flag
in the inferior accordingly.
(win32_attach): Don't set the attach_flag here. Pass 1 to
do_intial_win32_stuff.
(win32_files_info): Get it from the current inferior.
(win32_create_inferior): Dont clear attach_flag here. Pass 0 to
do_intial_win32_stuff.
* remote.c (struct remote_state): Add extended and
multi_process_aware fields.
(remote_multi_process_p): New.
(PACKET_vKill): New.
(record_currthread): Use thread_change_ptid. Notice new
inferiors.
(set_thread, remote_thread_alive): Use write_ptid.
(write_ptid, read_ptid): New.
(remote_current_thread, remote_threads_extra_info): Use them.
(remote_threads_info): Likewise. Detect new inferiors.
(remote_start_remote): Add inferior to inferior list.
(remote_multi_process_feature): New.
(remote_protocol_features): Add "multiprocess" feature.
(remote_query_supported): Pass "multiprocess+" as supported
features.
(remote_open_1): Clear multi_process_aware. Set extended
accordingly.
(remote_detach_1): Detach current process. Use extended packet
format for extended-remote multi-process. Detach process from the
inferior list. Only mourn after printing output.
(extended_remote_attach_1): Add process to the inferior list.
(remote_vcont_resume): Use write_ptid to pass the thread ids.
(remote_wait): Use read_ptid. Implement the extended
multi-process extension format of the 'W' and 'X' reply packets.
Remove exited inferiors from inferior list.
(remote_xfer_memory): Set general thread.
(remote_vkill): New.
(extended_remote_kill): New.
(remote_mourn_1): Discard all inferiors.
(select_new_thread_callback): New.
(extended_remote_mourn_1): If there are more processes to debug,
switch to a thread in another process, and don't pop the target.
(extended_remote_create_inferior_1): Add the new process to the
inferior list.
(remote_stopped_by_watchpoint): Indenting.
(remote_xfer_partial): Set the general thread.
(remote_pid_to_str): If the remote is multi-process aware, print
the process id as well as the thread id.
(remote_get_thread_local_address): Use write_ptid.
(init_extended_remote_ops): Register extended_remote_kill.
(_initialize_remote): Register new packets. Change
magic_null_ptid's, not_sent_ptid's and any_thread_ptid's pid
member to 42000.
* thread.c (thread_change_ptid): Also account for the inferior pid
changing.
* inferior.h (discard_all_inferiors): Declare.
* inferior.c (discard_all_inferiors): New.
2008-08-12 Sandra Loosemore <sandra@codesourcery.com>
* gdb.texinfo (Remote Configuration): Document set remote noack-packet.
(Remote Protocol): Add Packet Acknowledgment to menu.
(Overview): Mention +/- can be disabled, and point to new section
where this is discussed in detail.
(General Query Packets): Document QStartNoAckMode packet, and
corresponding qSupported reply.
(Packet Acknowledgment): New section.
gdb/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
Add no-ack mode to the remote protocol --- optionally stop ACKing
packets and responses when we have a reliable communication
medium.
Based on Apple's GDB, by Jason Molenda <jmolenda@apple.com>
* remote.c (struct remote_state): Add noack_mode field.
(PACKET_QStartNoAckMode): New.
(remote_start_remote): Don't any outstanding packet here.
(remote_open_1): Clear noack_mode. Ack any outstanding packet
here. Activate noack mode if requested.
(remote_protocol_features): Add QStartNoAckMode.
(remote_open_1):
(putpkt_binary): Don't send ack in noack mode.
(read_frame): Don't recompute the checksum in noack mode.
(getpkt_sane): Skip sending ack if in noack mode.
(_initialize_remote): Add set/show remote noack mode.
* NEWS: Note the new features.
gdb/gdbserver/
2008-08-12 Pedro Alves <pedro@codesourcery.com>
* remote-utils.c (noack_mode, transport_is_reliable): New globals.
(remote_open): Set or clear transport_is_reliable.
(putpkt_binary): Don't expect acks in noack mode.
(getpkt): Don't send ack/nac in noack mode.
* server.c (handle_general_set): Handle QStartNoAckMode.
(handle_query): If connected by tcp pass QStartNoAckMode+ in
qSupported.
(main): Reset noack_mode on every connection.
* server.h (noack_mode): Declare.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
* monitor.c (monitor_open): Include "gdbthread.h". Clear thread
list here.
* remote.c (record_currthread): Upgrade the main thread and its
entry in the thread list if this is the first time we hear about
threads.
(remote_thread_alive): Consider magic_null_ptid or a ptid without
a tid member always alive.
(remote_find_new_threads): Don't update the main thread here.
(remote_start_remote): Clear thread list here. Always add the
main thread.
(extended_remote_attach_1): Add the main thread here.
(extended_remote_mourn_1): Re-add the main thread here.
(extended_remote_create_inferior_1): Add a main thread.
* Makefile.in (monitor.o): Depend on $(gdbthread_h).
* remote.c (magic_null_ptid, not_sent_ptid, any_thread_ptid): New
globals.
(general_thread, continue_thread): Change type to ptid_t.
(record_currthread): Take a ptid_t parameter instead of an
integer.
(MAGIC_NULL_PID): Delete.
(set_thread): Take a ptid_t parameter and adjust.
(set_general_thread, set_continue_thread): New.
(remote_thread_alive, remote_newthread_step)
(remote_current_thread, remote_find_new_threads)
(remote_threads_info, remote_start_remote, remote_vcont_resume)
(remote_resume_1, remote_wait, extended_remote_create_inferior_1)
(threadalive_test, remote_pid_to_str)
(remote_get_thread_local_address): Adjust.
(_initialize_remote): Initialize magic_null_ptid, not_sent_ptid
and any_thread_ptid.
* target.h (struct target_ops): Delete to_async_mask_value and add
to_async_mask.
(target_is_async_p, target_async): Formatting.
(target_async_mask_value): Delete.
(target_async_mask): Delete function declaration, and add new
target macro with the same name.
* target.c (update_current_target): Replace to_async_mask_value by
to_async_mask. Default to_async_mask to return_one.
(target_async_mask): Delete.
(find_default_can_async_p, find_default_is_async_p): New.
(init_dummy_target): register find_default_can_async_p and
find_default_is_async_p on the dummy target.
* linux-nat.c: Include inf-loop.h, event-loop.h and event-top.h.
(debug_linux_nat_async): New global.
(show_debug_linux_nat_async): New function.
(linux_nat_async_enabled, linux_nat_async_mask_value)
(linux_nat_event_pipe, linux_nat_num_queued_events)
(linux_nat_async_events_enabled): New globals.
(struct waitpid_result): New struct.
(waitpid_queue): New global.
(queued_waitpid, push_waitpid, drain_queued_events): New.
(my_waitpid): Call queued_waitpid.
(linux_child_follow_fork): Disable async events during the call.
(blocked_mask): Delete.
(sync_sigchld_action, async_sigchld_action): New globals.
(lin_lwp_attach_lwp): In sync mode, don't reblock SIGCHLD. In
async mode, block events during the call.
(linux_nat_create_inferior): New.
(linux_nat_attach): In sync mode, restore the mask states. In
async mode, wake the event loop immediatelly.
(detach_callback): Drain all queued events of the lwp we're
detaching from.
(linux_nat_detach): Block async mode, and drain events of the main
process.
(linux_nat_resume): If in async mode, mask async events during the
call. If short circuiting, force event loop to wake up. If
resuming, set target_executing, and register target events in the
event loop.
(pipe_to_local_event_queue, local_event_queue_to_pipe): New.
(linux_nat_wait): In async mode, block events during the call.
Only enable/disable passing SIGINT to the inferior in sync mode.
Get events from local waitpid queue. If no interesting events was
found, return to events loop. Reregister target events in the
event loop on exit. In sync mode, no need to reblock SIGCHLD.
(linux_nat_kill): Disable events on entry.
(linux_nat_mourn_inferior): In sync mode, don't restore the masks
here. Detach async mode from the event loop if there are no more
forks available, otherwise leave it on.
(sigchld_handler): Assure this is called only in sync mode.
(linux_async_permitted, linux_async_permitted_1): New globals.
(set_maintenance_linux_async_permitted)
(show_maintenance_linux_async_permitted): New functions.
(linux_nat_is_async_p, linux_nat_can_async_p)
(linux_nat_async_mask): New.
(linux_nat_event_pipe_pop, linux_nat_event_pipe_push): New.
(get_pending_events, async_sigchld_handler): New.
(linux_nat_async_events): New.
(async_terminal_is_ours): New global.
(linux_nat_terminal_inferior, linux_nat_terminal_ours): New.
(async_client_callback, async_client_context): New.
(linux_nat_async_file_handler, linux_nat_async)
(linux_nat_disable_async, linux_nat_enable_async): New.
(linux_nat_add_target): Register linux_nat_create_inferior,
linux_nat_can_async_p, linux_nat_is_async_p, linux_nat_async,
linux_nat_async_mask, linux_nat_terminal_inferior and
linux_nat_terminal_ours.
(_initialize_linux_nat): Remove local action variable, and update
code that used it to use sync_sigchld_action. Add new
"lin-lwp-async" debug set/show command. Put the "lin-lwp" debug
set/show command in the maintenance class. Add new "linux-async"
maintenance set/show command. Block SIGCHLD by default. Setup
async_sichld_action, and sync_sigchld_action. Install the default
async mode.
(lin_thread_get_thread_signals): Use a local sigset_t for blocking
the cancel signals.
* linux-thread-db.c (re_check_for_thread_db): New.
(clear_lwpid_callback): Handle TARGET_WAITKIND_IGNORE.
(thread_db_can_async_p, thread_db_is_async_p, thread_db_async)
(thread_db_async_mask): New.
(init_thread_db_ops): Register thread_db_can_async_p,
thread_db_is_async_p, thread_db_async and thread_db_async_mask.
* remote.c (remote_async_mask_value): New.
(remote_return_zero): New.
(init_remote_ops): Register remote_return_zero as callbacks of
to_can_async_p and to_is_async_p.
(remote_can_async_p, remote_is_async_p, remote_async): Update to
use remote_async_mask_value.
(remote_async_mask): New.
(init_remote_async_ops): Remove to_async_mask_value setting and
register remote_async_mask as to_async_mask callback in
remote_async_ops.
* Makefile.in (linux-nat.o): Update.
gdb/doc/
* gdb.texinfo (Debugging Output): Document
"set/show debug lin-lwp-async".
(Maintenance Commands): Document "maint set/show linux-async".
* Makefile.in (infcmd.o, inf-loop.o): Update dependencies.
* breakpoint.c (bpstat_do_actions): In async mode,
don't jump to top expecting stop_bpstat to be already
updated.
* event-loop.c (start_event_loop): Call async_enable_stdin
on exception.
* event-top.c (async_enable_stdin): Do nothing if sync_execution
is not set.
(command_handler): Do not setup continuation here.
(command_line_handler_continuation): Move to...
* top.c (command_line_handler_continuation): ... here.
(execute_command): In async mode, register continuation.
Don't check frame's language in running in async mode.
* exceptions.c (throw_exception): Don't do exec_error_cleanups.
* inf-loop.c (complete_execution): Inline into...
(inferior_event_handler): ... here. Clear target_executing before
doing any cleanups. Don't try to show prompt if the target was
resumed.
* infcmd.c (signal_command): Add support for async mode.
(finish_command): Only add continuation if the target was
successfully resumed.
* remote.c (init_async_opts): Register to_get_thread_local_address
handler.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Don't mess
with sync_execution.
* tui/tui-interp.c (tui_command_loop): Call async_enable_stdin
on exception.
* remote.c (deprecated_target_resume_hook)
(deprecated_target_wait_loop_hook): Remove.
(remote_resume): Do not call deprecated_target_resume_hook.
(remote_wait): Do not call deprecated_target_wait_loop_hook.
(remote_async_wait): Likewise.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
* thread.c (add_thread_silent): Renamed
from add_thread.
(print_thread_events): New variable definition.
(show_print_thread_events): New function.
(_initialize_thread): Add "set print thread-events" and
"show print thread-events" commands.
(add_thread): Announce new thread.
* gdbthread.h (add_thread_silent): Declare.
(print_thread_events): New variable declaration.
* inf-ttrace.c (inf_ttrace_wait): Don't
inform about new thread, as add_thread is always
called too, and will take care of that.
* infrun.c (handle_inferior_event): Likewise.
* procfs.c (procfs_wait): Likewise.
* remote.c (remote_currthread): Likewise.
* sol-thread.c (sol_thread_wait): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
* linux-thread-db.c (attach_thread): Likewise.
Remove the verbose parameter.
(check_event): Make detach_thread be verbose
only if print_thread_events is set.
* linux-nat.c (lin_lwp_attach_lwp): Don't inform
about new thread. This is called only from
linux-thread-db.c:attach_thread, which will take care.
Remove the verbose parameter.
* linux-nat.h (lin_lwp_attach_lwp): Adjust prototype.
* remote.c (init_remote_state, fetch_register_using_p)
(process_g_packet, remote_fetch_registers, remote_prepare_to_store)
(store_register_using_P, store_registers_using_G)
(remote_store_registers): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by frame, respectively.
Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (watchpoints_triggered): New.
(bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
Check watchpoint_triggered instead. Combine handling for software
and hardware watchpoints. Do not use target_stopped_data_address
here. Always check a watchpoint if its scope breakpoint triggers.
Do not stop for thread or overlay events. Improve check for
triggered watchpoints without a value change.
(watch_command_1): Insert the scope breakpoint first. Link the
scope breakpoint to the watchpoint.
* breakpoint.h (enum watchpoint_triggered): New.
(struct breakpoint): Add watchpoint_triggered.
(bpstat_stop_status): Update prototype.
(watchpoints_triggered): Declare.
* infrun.c (enum infwait_status): Add infwait_step_watch_state.
(stepped_after_stopped_by_watchpoint): Delete.
(handle_inferior_event): Make stepped_after_stopped_by_watchpoint
local. Handle infwait_step_watch_state. Update calls to
bpstat_stop_status. Use watchpoints_triggered to check
watchpoints.
* remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
(remote_stopped_data_address): Do not check it.
* gdb.texinfo (Setting Watchpoints): Adjust warning text about
multi-threaded watchpoints.
* gdbint.texinfo (Watchpoints): Describe how watchpoints are
checked. Describe sticky notification. Expand description
of steppable and continuable watchpoints.
(Watchpoints and Threads): New subsection.
* gdb.threads/watchthreads.c (thread_function): Sleep between
iterations.
* gdb.threads/watchthreads.exp: Allow two watchpoints to trigger
at once for S/390. Generate matching fails and passes.
* symfile.c (symfile_map_offsets_to_segments): Doc fixes.
Assert that we were passed some loaded segment addresses,
and that sections' segment numbers are valid.
Simplify offset calculation.
* remote.c (get_offsets): Clarify selection of relocate-by-segment
strategy, and set num_segments correctly. Delete redundant
assignments to do_sections.
Thiago Bauermann <bauerman@br.ibm.com>
Joseph S. Myers <joseph@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
gdb/
* remote.c (remote_check_symbols): Use
gdbarch_convert_from_func_ptr_addr.
* infcall.c (find_function_addr): Handle function descriptors
without debugging information.
* ppc-linux-tdep.c (ppc_linux_convert_from_func_ptr_addr): Renamed
from ppc64_linux_convert_from_func_ptr_addr. Handle -msecure-plt.
(ppc_linux_init_abi): Always set convert_from_func_ptr_addr.
* solib-svr4.c (solib_break_names): Remove "._dl_debug_state".
(bfd_lookup_symbol): Do not take a SECT_FLAGS argument. Always
allow SEC_CODE and SEC_DATA.
(enable_break): Update calls. Pass current_target to solib_add.
Use gdbarch_convert_from_func_ptr_addr.
gdb/gdbserver/
* remote-utils.c (look_up_one_symbol): Handle 'm' packets.
* observer.texi (GDB Observers): New observer "new_objfile".
ChangeLog:
* observer.sh: Add "struct objfile" forward declaration.
* target.h (deprecated_target_new_objfile_hook): Remove.
* symfile.c (deprecated_target_new_objfile_hook): Remove.
(clear_symtab_users): Call observer_notify_new_objfile.
(symbol_file_add_with_addrs_or_offsets): Likewise.
* rs6000-nat.c: Include "observer.h".
(vmap_ldinfo): Call observer_notify_new_objfile.
(xcoff_relocate_core): Likewise.
* remote.c (remote_new_objfile_chain): Remove.
(remote_new_objfile): Do not call remote_new_objfile_chain.
(_initialize_remote): Use observer_attach_new_objfile.
* tui/tui-hooks.c (tui_target_new_objfile_chain): Remove.
(tui_new_objfile_hook): Do not call tui_target_new_objfile_chain.
(_initialize_tui_hooks): Use observer_attach_new_objfile.
* aix-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(new_objfile): Do not call target_new_objfile_chain.
(_initialize_aix_thread): Use observer_attach_new_objfile.
* hpux-thread.c: Include "observer.h"
(target_new_objfile_chain): Remove.
(hpux_thread_new_objfile): Make static. Do not call
target_new_objfile_chain.
(_initialize_hpux_thread): Use observer_attach_new_objfile.
* linux-thread-db.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(thread_db_new_objfile): Do not call target_new_objfile_chain.
(_initialize_thread_db): Use observer_attach_new_objfile.
* sol-thread.c: Include "observer.h".
(target_new_objfile_chain): Remove.
(sol_thread_new_objfile): Make static. Do not call
target_new_objfile_chain.
(_initialize_sol_thread): Use observer_attach_new_objfile.
* Makefile.in (aix-thread.o, hpux-thread.o, linux-thread-db.o,
rs6000-nat.o, sol-thread.o, tui-hooks.o): Add dependency on
$(observer_h).
