Adjusting the start of the relro segment in order to make it end
exactly on a page boundary runs into difficulties when sections in the
relro segment are aligned; Adjusting the start by (next_page - end)
sometimes results in more than that adjustment occurring at the end,
overrunning the page boundary. So when that occurs we try a new lower
start position by masking the adjusted start with the maximum section
alignment. However, we didn't consider that this masked start address
may in fact be before the initial relro base, which is silly since
that can only increase padding at the relro end.
I've also moved some calculations closer to where they are used, and
comments closer to the relevant statements.
* ldlang.c (lang_size_sections): When alignment of sections
results in relro base adjustment being too large, don't go lower
than the initial value.
* ldexp.c (fold_binary <DATA_SEGMENT_RELRO_END>): Comment.
* scripttempl/elf.sc (DATA_SEGMENT_ALIGN): Omit SEGMENT_SIZE
alignment when SEGMENT_SIZE is the same as MAXPAGESIZE.
bfd * elf32-v850.c (v850_set_note): New function. Creates a Renesas
style note entry.
(v850_elf_make_note_section): New function. Creates a note
section.
(v850_elf_create_sections): New function. Create a note section
if one is not already present.
(v850_elf_set_note): New function. Adds a note to a bfd.
(v850_elf_copy_private_bfd_data): New function. Copies V850
notes.
(v850_elf_merge_notes): New function. Merges V850 notes.
(print_v850_note): New function. Displays a V850 note.
(v850_elf_print_notes): New function. Displays all notes attached
to a bfd.
(v850_elf_merge_private_bfd_data): Call v850_elf_merge_notes.
(v850_elf_print_private_bfd_data): Call v850_elf_print_notes.
(v850_elf_fake_sections): Set the type of the V850 note section.
* bfd-in.h (v850_elf_create_sections): Add prototype.
(v850_elf_set_note): Add prototype.
* bfd-in2.h: Regenerate.
binutils* readelf.c (get_machine_flags): Remove deprecated V850 machine
flags.
(get_v850_section_type_name): New function. Handles V850 special
sections.
(get_section_type_name): Add support for V850.
(get_v850_elf_note_type): New function. Returns the name of a
V850 note.
(print_v850_note): New function. Prints a V850 note.
(process_v850_notes): New function. Prints V850 notes.
(process_note_sections): Add support for V850.
binutils/testsute
* binutils-all/objcopy.exp: Skip the strip-10 test for the V850.
gas * config/tc-v850.c (soft_float): New variable.
(v850_data_8): New variable.
(md_show_usage): Add -msoft-float/-mhard-float.
(md_parse_option): Likewise.
(md_begin): Set the default value of soft_float.
(v850_md_end): New function. Creates a note section.
* config/tc-v850.h (md_end): Define.
* doc/c-v850.texi: Document -msoft-float/-mhard-float.
gas/testsuite
* gas/elf/elf.exp: Add special version of the section2 test for
the V850.
* gas/elf/section2.e-v850: New file.
include/elf
* v850.h (EF_RH850_SIMD): Delete deprecated flag.
(EF_RH850_CACHE): Likewise.
(EF_RH850_MMU): Likewise.
(EF_RH850_DATA_ALIGN8): Likewise.
(SHT_RENESAS_IOP): Fix typo in name.
(SHT_RENESAS_INFO): Define.
(V850_NOTE_SECNAME): Define.
(SIZEOF_V850_NOTE): Define.
(V850_NOTE_NAME): Define.
(enum v850_notes): New enum.
(NUM_V850_NOTES): Define.
ld/ChangeLog
2015-02-24 Nick Clifton <nickc@redhat.com>
* Makefile.am (ev850.c): Add dependency upon
$(srcdir)/emultempl/v850elf.em.
(ev850_rh850.c): Likewise.
* Makefile.in: Regenerate.
* emultempl/v850elf.em: New file.
* emulparams/v850.sh (EXTRA_EM_FILE): Define.
* emulparams/v850_rh850.sh (EXTRA_EM_FILE): Define.
* scripttempl/v850.sc: Add .note.renesas section.
* scripttempl/v850_rh850.sc: Likewise.
ld/testsuite
* ld-elf/extract-symbol-1sec.d: Expect to fail on the V850.
ld * scripttempl/avr.sc: Add new user_signatures region. Define and Use
symbols for all region lengths.
* scripttempl/avrtiny.sc: Define and use symbols for all region lengths.
testsuite * ld-avr/region_overflow.d: New test.
* ld-avr/region_overflow.s: Likewise.
.toc1 is the second level TOC section used by gcc's -mminimal-toc. It
too should be read-only after relocation. Also, the last patch
description mentioned .sbss moving but didn't actually do that, so fix
that problem. .tocbss (whatever that is) was before .sbss previously,
so move that one too.
* emulparams/elf64ppc.sh (OTHER_SDATA_SECTIONS): Use in place of..
(OTHER_BSS_SYMBOLS): ..this.
(OTHER_PLT_RELOC_SECTIONS): Don't define.
(OTHER_GOT_RELOC_SECTIONS): Add rela.toc1 and rela.tocbss.
(OTHER_READWRITE_SECTIONS): Don't define. Move .toc1 to..
(OTHER_RELRO_SECTIONS_2): ..here.
* scripttempl/elf.sc: Move SBSS too when DATA_SDATA.
This moves .got too, which requires .sdata and .sbss to move with it,
because these sections share addressing via the toc pointer and with
small-model code must be within a 16-bit signed offset. .plt, .iplt
and .branch_lt must also be moved since they are addressed via a
32-bit offset from the toc pointer, and we might have a very large
.data section.
This change means we may have some bss style sections before the data
segment, necessitating another PT_LOAD header. Also, since _edata is
defined at the end of the data segment it's possible with an empty
.data to have _edata at the end of .plt which looks a little unusual
since .plt is a bss style section. That should only happen rarely in
real world binaries, but does occur in the ld testsuite.
ld/
* emulparams/elf64ppc.sh (BSS_PLT): Don't define.
(OTHER_READWRITE_SECTIONS): Move .branch_lt to..
(OTHER_RELRO_SECTIONS_2): ..here.
(DATA_GOT, SEPARATE_GOTPLT, DATA_SDATA, DATA_PLT,
PLT_BEFORE_GOT): Define.
* scripttempl/elf.sc: Handle DATA_SDATA and DATA_GOT/DATA_PLT/
PLT_BEFORE_GOT combination.
(DATA_GOT, SDATA_GOT): Don't define if either is already defined.
ld/testsuite/
* ld-powerpc/ambiguousv1.d,
* ld-powerpc/ambiguousv1b.d,
* ld-powerpc/ambiguousv2.d,
* ld-powerpc/ambiguousv2b.d,
* ld-powerpc/elfv2exe.d,
* ld-powerpc/elfv2so.d,
* ld-powerpc/tlsexe.r,
* ld-powerpc/tlsexetoc.r,
* ld-powerpc/tlsso.r,
* ld-powerpc/tlstocso.r: Update.
More sections can be read-only after relocation. .opd is an obvious
candidate.
* emulparams/elf64ppc.sh (OTHER_READWRITE_SECTIONS): Move .opd to..
(OTHER_RELRO_SECTIONS_2): ..here, new define.
* scripttempl/elf.sc: Add OTHER_RELRO_SECTIONS_2.
* archures.c: add avrtiny architecture for avr target.
* bfd-in2.h: Regenerate.
* cpu-avr.c (arch_info_struct): add avrtiny arch info.
* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
added for 16 bit LDS/STS instruction of avrtiny arch.
(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
BFD_RELOC_AVR_LDS_STS_16.
(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
(elf32_avr_object_p): set machine number for avrtiny arch.
* libbfd.h: Regenerate.
* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.
* config/tc-avr.c (mcu_types): Add avrtiny arch.
Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
and attiny40.
(md_show_usage): Add avrtiny arch in usage message.
(avr_operand): validate and issue error for invalid register for avrtiny.
add new reloc exp for 16 bit lds/sts instruction.
(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
(md_assemble): check ISA for arch and issue diagnostic.
* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
(AVR_ISA_2xxxa): define ISA without LPM.
(AVR_ISA_AVRTINY): define avrtiny arch ISA.
Add doc for contraint used in 16 bit lds/sts.
Adjust ISA group for icall, ijmp, pop and push.
Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
is not avrtiny.
* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
(eavrtiny.c): add rules for avrtiny emulation source.
* Makefile.in: Regenerate.
* configure.tgt: Add avrtiny to avr target emulations.
* scripttempl/avrtiny.sc: New file.
linker script template for avrtiny arch.
* emulparams/avrtiny.sh: New file.
emulation parameters for avrtiny arch.
and fix more nds32 dependencies.
* scripttempl/elf.sc: Edit out __rela_iplt symbol assignments from
.rel sections, and __rel_iplt from .rela sections.
* scripttempl/nds32elf.sc: Likewise.
* Makefile.am (ends32*.c): Depend on nds32elf.sc.
* Makefile.in: Regenerate.
the Cygwin and MinGW targets. The manifest is now going to be handled by gcc.
* scripttempl/pe.sc (R_RSRC): Remove default manifest.
* scripttempl/pep.sc (R_RSRC): Remove default manifest.
should work for all types of input .rsrc section.
* peXXigen.c (rsrc_process_section): Add code to scan input
sections and record their lengths. Use these lengths to find the
start of each merged .rsrc section.
* scripttempl/pe.sc (R_RSRC): Fix default-manifest exclusion.
(.rsrc): Add SUBALIGN(4). Remove SORT.
* scripttempl/pep.sc: Likewise.
The manifest is necessary in order for the linked binaries to be executed in a Windows 8 environment.
The manifest is added using a linker script so that this feature will be compiler-neutral. The resource
merging code in the linker means that if an application provides its own manifest then the default
manifest will be ignored.
* configure.in (all_emul_extra_binaries): New variable. Populated
by invoking configure.tgt.
(EMUL_EXTRA_BINARIES): New substitution.
* configure: Regenerate.
* configure.tgt (target_extra_binaries): New variable. Set to
default-manifest.o for Cygwin and MinGW targets.
* Makefile.am (EMUL_EXTRA_BINARIES): New variable. Initialised
by the configure script.
(ALL_EMUL_EXTRA_BINARIES): New variable.
(default-manifest.o): New rule to build the default manifest.
(ld_new_DEPENDENCIES): Add EMUL_EXTRA_BINARIES.
(install-data-local): Add EMUL_EXTRA_BINARIES.
* Makefile.in: Regenerate.
* ld.texinfo: Document default manifest support.
* emulparams/i386pe.sh (DEFAULT_MANIFEST): Define.
* emulparams/i386pep.sh (DEFAULT_MANIFEST): Define.
* emultempl/default-manifest.rc: New file.
* scripttempl/pe.sc (R_RSRC): Include DEFAULT_MANIFEST, if defined.
* scripttempl/pep.sc (R_RSRC): Likewise.
* ld-pe/longsecn-1.d: Allow for extra sections.
* ld-pe/longsecn-2.d: Likewise.
* ld-pe/longsecn.d: Likewise.
* ld-pe/secrel.d: Likewise.
An assignment to dot in an output section that allocates space of
course keeps the output section. Here, I'm changing the behaviour for
assignments that don't allocate space. The idea is not so much to
allow people to force output of an empty section with ". = .", but
to fix cases where an otherwise empty section has padding added by an
alignment expression that changes with relaxation or .eh_frame
editing. Such a section might have zero size before relaxation and so
be stripped incorrectly.
ld/
* ld.texinfo (Output Section Discarding): Mention assigning to dot
as a way of keeping otherwise empty sections.
* ldexp.c (is_dot, is_value, is_sym_value, is_dot_ne_0,
is_dot_plus_0, is_align_conditional): New predicates.
(exp_fold_tree_1): Set SEC_KEEP when assigning to dot inside an
output section, except for some special cases.
* scripttempl/elfmicroblaze.sc: Use canonical form to align at
end of .heap and .stack.
ld/testsuite/
* ld-shared/elf-offset.ld: Align end of .bss with canonical form
of ALIGN that allows an empty .bss to be removed.
* ld-arm/arm-dyn.ld: Likewise.
* ld-arm/arm-lib.ld: Likewise.
* ld-elfvsb/elf-offset.ld: Likewise.
* ld-mips-elf/mips-dyn.ld: Likewise.
* ld-mips-elf/mips-lib.ld: Likewise.
* ld-arm/arm-no-rel-plt.ld: Remove duplicate ALIGN.
* ld-powerpc/vle-multiseg-1.ld: Remove ALIGN at start of section.
ALIGN address of section instead.
* ld-powerpc/vle-multiseg-2.ld: Likewise.
* ld-powerpc/vle-multiseg-3.ld: Likewise.
* ld-powerpc/vle-multiseg-4.ld: Likewise.
* ld-powerpc/vle-multiseg-6.ld: Likewise.
* ld-scripts/empty-aligned.d: Check section headers not program
headers. Remove xfail and notarget.
* ld-scripts/empty-aligned.t: Use canonical ALIGN for end of .text2.
free location in the text memory region, not a computation based
upon the size of the text section. Orphaned sections or other
linker scripts might insert new sections between the .text section
and the .data section.
* scripttempl/elf32msp430_3.sc (.data): Likewise.
* elfxx-mips.h (_bfd_mips_elf_get_synthetic_symtab): New
prototype.
* elf32-mips.c (elf_backend_plt_sym_val): Remove macro.
(bfd_elf32_get_synthetic_symtab): New macro.
* elfxx-mips.c (plt_entry): New structure.
(mips_elf_link_hash_entry): Add use_plt_entry member.
(mips_elf_link_hash_table): Rename plt_entry_size member to
plt_mips_entry_size. Add plt_comp_entry_size, plt_mips_offset,
plt_comp_offset, plt_got_index entries and plt_header_is_comp
members.
(STUB_LW_MICROMIPS, STUB_MOVE_MICROMIPS): New macros.
(STUB_LUI_MICROMIPS, STUB_JALR_MICROMIPS): Likewise.
(STUB_ORI_MICROMIPS, STUB_LI16U_MICROMIPS): Likewise.
(STUB_LI16S_MICROMIPS): Likewise.
(MICROMIPS_FUNCTION_STUB_NORMAL_SIZE): Likewise.
(MICROMIPS_FUNCTION_STUB_BIG_SIZE): Likewise.
(micromips_o32_exec_plt0_entry): New variable.
(mips16_o32_exec_plt_entry): Likewise.
(micromips_o32_exec_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize use_plt_entry.
(mips_elf_output_extsym): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_gotplt_index): Likewise. Remove the VxWorks
restriction. Use MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_elf_count_got_symbols): Update to use gotplt_union's plist
member rather than offset.
(mips_elf_calculate_relocation): Handle MIPS16/microMIPS PLT
entries.
(_bfd_mips_elf_create_dynamic_sections): Don't set PLT sizes
here.
(mips_elf_make_plt_record): New function.
(_bfd_mips_elf_check_relocs): Update comment. Record occurences
of JAL relocations that might need a PLT entry.
(_bfd_mips_elf_adjust_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Set individual
PLT entry sizes here. Handle MIPS16/microMIPS PLT entries.
Don't set the symbol's value in the symbol table for PLT
references here. Don't set the PLT or PLT GOT section sizes
here.
(mips_elf_estimate_stub_size): Handle microMIPS stubs.
(mips_elf_allocate_lazy_stub): Likewise.
(mips_elf_lay_out_lazy_stubs): Likewise. Define a _MIPS_STUBS_
magic symbol.
(mips_elf_set_plt_sym_value): New function.
(_bfd_mips_elf_size_dynamic_sections): Set PLT header size and
PLT and PLT GOT section sizes here. Set the symbol values in
the symbol table for PLT references here. Handle microMIPS
annotation of the _PROCEDURE_LINKAGE_TABLE_ magic symbol.
(_bfd_mips_elf_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Handle
MIPS16/microMIPS PLT entries. Handle microMIPS stubs.
(_bfd_mips_vxworks_finish_dynamic_symbol): Update to use
gotplt_union's plist member rather than offset. Use
MIPS_ELF_GOT_SIZE to calculate GOT address.
(mips_finish_exec_plt): Handle microMIPS PLT. Return status.
(_bfd_mips_elf_finish_dynamic_sections): Handle result from
mips_finish_exec_plt.
(_bfd_mips_elf_link_hash_table_create): Update to use
gotplt_union's plist member rather than offset.
(_bfd_mips_elf_get_synthetic_symtab): New function.
include/elf/
* mips.h (ELF_ST_IS_MIPS_PLT): Respect STO_MIPS16 setting.
(ELF_ST_SET_MIPS_PLT): Likewise.
gdb/
* mips-tdep.c (mips_elf_make_msymbol_special): Handle MIPS16 and
microMIPS synthetic symbols.
ld/
* emulparams/elf32btsmip.sh: Arrange for .got.plt to be placed
as close to .plt as possible.
* scripttempl/elf.sc: Handle $INITIAL_READWRITE_SECTIONS and
$PLT_NEXT_DATA variables.
ld/testsuite/
* ld-mips-elf/jalx-2.dd: Update for microMIPS PLT support.
* ld-mips-elf/pic-and-nonpic-3a.dd: Update for the _MIPS_STUBS_
magic symbol.
* ld-mips-elf/pic-and-nonpic-3b.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n32.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-n64.dd: Likewise.
* ld-mips-elf/pic-and-nonpic-6-o32.dd: Likewise.
* ld-mips-elf/stub-dynsym-1-10000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-2fe80.d: Likewise.
* ld-mips-elf/stub-dynsym-1-7fff.d: Likewise.
* ld-mips-elf/stub-dynsym-1-8000.d: Likewise.
* ld-mips-elf/stub-dynsym-1-fff0.d: Likewise.
* ld-mips-elf/tlslib-o32.d: Likewise.
opcodes/
* mips-dis.c (is_mips16_plt_tail): New function.
(print_insn_mips16): Handle MIPS16 PLT entry's GOT slot address
word.
(is_compressed_mode_p): Handle MIPS16/microMIPS PLT entries.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* coff-i386.c (bfd_target): Add section flag SEC_EXCLUDE.
Allow BFD_COMPRESS and BFD_DECOMPRESS flags.
* coff-x86_64.c: Likewise.
* coffcode.h (DOT_ZDEBUG): New define.
(sec_to_styp_flags): Check for .zdebug.
(styp_to_sec_flags): Likewise.
* coffgen.c (make_a_section): Handle .debug_* section
compression/decompression flags.
* cofflink.c (mark_relocs): Ignore relocations
for a section, which isn't marked as used.
(_bfd_coff_link_input_bfd): Add support of compressed
debug sections.
* compress.c (decompress_contents): Loop as long
as there is input available and there is room for
output.
* bfd/pe-arm.c: Add .zdebug_ partial match entry.
* pe-i386.c: Likewise.
* pe-x86_64.c: Likewise.
* peXXigen.c (_bfd_XXi_swap_aouthdr_out): Don't clear all
data-directories as this might destroy content.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator):
define as coff_find_nearest_line_discriminator.
* libcoff-in.h (coff_find_nearest_line_discriminator): New
* libcoff.h: Regenerated.
* coff-x86_64.c: Likewise.
* coffgen.c (coff_find_nearest_line_discriminator): New function.
prototype.
ChangeLog binutils
2012-10-18 Kai Tietz <ktietz@redhat.com>
* objdump.c (dump_bfd): Call dump headers after
call of slurp_symtab.
ChangeLog ld
2012-10-18 Kai Tietz <ktietz@redhat.com>
PR binutils/14067
* NEWS: Menition new feature.
* scripttempl/pep.sc: Add zdebug sections.
* scripttempl/pe.sc: L
orphan sections to .data and .bss output sections, not just .text.
When giving up on finding a suitable output section, attach to any
output section other than .MMIX.reg_contents, if it exists.
* scripttempl/mmo.sc: Move output debug sections to just before
.MMIX.reg_contents. Add .gnu.attributes. Add new . = . NOP
assignments and move end-of-section provide-symbols after them
to force the end-of-section symbols to the address after orphan
placement. Add SORT_NONE to .init and .fini sections.
* emulparams/elf32bmip.sh: Make _gp hidden.
* emulparams/elf32bmipn32-defs.sh: Likewise.
* emulparams/elf32mipswindiss.sh: Likewise.
* scripttempl/mips.sc: Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Adjust section VMAs after the removal
of _gp from the global scope.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
PR ld/12365
* cofflink.c (bfd_coff_link_input_bfd): Check for and warn about
references to symbols defined in discarded sections.
ld/ChangeLog:
PR ld/12365
* scripttempl/pe.sc (__rt_psrelocs_start): New symbol definition.
(__rt_psrelocs_end): Likewise.
(__rt_psrelocs_size): Likewise difference between the above.
(__RUNTIME_PSEUDO_RELOC_LIST_END__): Move outside .rdata section
immediately after end of pseudo-reloc data.
(___RUNTIME_PSEUDO_RELOC_LIST_END___): Likewise.
(__RUNTIME_PSEUDO_RELOC_LIST__): Move outside .rdata section and
calculate backward from list end.
(___RUNTIME_PSEUDO_RELOC_LIST___): Likewise.
* scripttempl/pep.sc: Likewise.
ld/testsuite/ChangeLog:
PR ld/12365
* ld-plugin/plugin-7.d: Allow underscore in error message.
* ld-plugin/plugin-8.d: Likewise.
(dwcfi_hash): New static hash variable.
(get_debugseg_name): New.
(alloc_debugseg_item): New.
(make_debug_seg): New.
(dwcfi_hash_insert): New.
(dwcfi_hash_find): New.
(dwcfi_hash_find_or_make): New.
(cfi_insn_data): New member cur_seg.
(cie_entry): Likewise.
(fde_entry): New cseg and handled members.
(alloc_fde_entry): Initialize cseg member.
(alloc_cfi_insn_data): Initialize cur_seg member.
(dot_cfi_sections): Compare for beginning of
section names via strncmp.
(get_cfi_seg): New.
(cfi_finish): Treat link-once sections.
(is_now_linkonce_segment): New local helper.
(output_cie): Ignore cie entries not member of current
segment.
(output_fde): Likewise.
(select_cie_for_fde): Likewise.
(cfi_change_reg_numbers): Add new argument for current segment
and ignore insn elements, if not part of current segment.
* ehopt.c (get_cie_info): Use strncmp for
section name matching.
(heck_eh_frame): Likewise.
* coffcode.h (sec_to_styp_flags): Allow linkonce for
debugging sections.
* scripttempl/pe.sc: Handle .eh_frame($|.)* sections.
* scripttempl/pep.sc: Likewise.
* ld-pe/pe.exp: Add cfi/cfi32 tests.
* ld-pe/cfi.d: New.
* ld-pe/cfi32.d: New.
* ld-pe/cfia.s: New.
* ld-pe/cfib.s: New.
* scripttempl/pe.sc: (.note.GNU-stack): Mark as discardable.
(.gnu.lto_*): Likewise.
* scripttempl/pep.sc: (.note.GNU-stack): Mark as discardable.
(.gnu.lto_*): Likewise.
the new $RELOCATEABLE_OUTPUT_FORMAT, if set.
(OUTPUT_FORMAT): Use the variable $OUTPUT_FORMAT.
(ENTRY): Don't emit for relocateable links.
(/DISCARD/): Don't discard .gnu.warning.* for relocateable links.
* emulparams/mmo.sh (RELOCATEABLE_OUTPUT_FORMAT): Set, to
elf64-mmix.
* emulparams/elf64mmix.sh (OTHER_TEXT_SECTIONS): Empty, don't
provide "Main" or set "_start.", for relocateable links.
2009-06-06 H.J. Lu <hongjiu.lu@intel.com>
* elf32-i386.c (elf_i386_link_hash_table): Add irelifunc.
(elf_i386_link_hash_table_create): Initialize irelifunc.
(elf_i386_check_relocs): Updated. Set up irelifunc for
shared objects.
(elf_i386_allocate_dynrelocs): Use irelifunc for dynamic
relocation for non-GOT reference of STT_GNU_IFUNC symbol in
shared objects.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_link_hash_table): Add irelifunc.
(elf64_x86_64_link_hash_table_create): Initialize irelifunc.
(elf64_x86_64_check_relocs): Updated. Set up irelifunc for
shared objects.
(elf64_x86_64_allocate_dynrelocs): Use irelifunc for dynamic
relocation for non-GOT reference of STT_GNU_IFUNC symbol in
shared objects.
(elf64_x86_64_relocate_section): Likewise.
* elf-bfd.h (_bfd_elf_create_static_ifunc_sections): Renamed to
...
(_bfd_elf_create_ifunc_sections): This.
* elflink.c (_bfd_elf_create_static_ifunc_sections): Renamd to
...
(_bfd_elf_create_ifunc_sections): This. Create .rel[a].ifunc
for shared objects.
ld/
2009-06-06 H.J. Lu <hongjiu.lu@intel.com>
* scripttempl/elf.sc: Add .rel.ifunc and .rela.ifunc.
* common.h (STT_IFUNC): Define.
elfcpp/
* elfcpp.h (enum STT): Add STT_IFUNC.
bfd/
* syms.c (struct bfd_symbol): Add new flag BSF_INDIRECT_FUNCTION.
Remove redundant flag BFD_FORT_COMM_DEFAULT_VALUE. Renumber flags
to remove gaps.
(bfd_print_symbol_vandf): Return 'i' for BSF_INDIRECT_FUNCTION.
(bfd_decode_symclass): Likewise.
* elf.c (swap_out_syms): Translate BSF_INDIRECT_FUNCTION into
STT_IFUNC.
(elf_find_function): Treat STT_IFUNC in the same way as STT_FUNC.
(_bfd_elf_is_function_type): Likewise.
* elf32-arm.c (arm_elf_find_function): Likewise.
(elf32_arm_adjust_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_additional_program_headers): Likewise.
* elf32-i386.c (is_indirect_symbol): New function.
(elf_i386_check_relocs): Also generate dynamic relocs for
relocations against STT_IFUNC symbols.
(allocate_dynrelocs): Likewise.
(elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (is_indirect_symbol): New function.
(elf64_x86_64_check_relocs): Also generate dynamic relocs for
relocations against STT_IFUNC symbols.
(allocate_dynrelocs): Likewise.
(elf64_x86_64_relocate_section): Likewise.
* elfcode.h (elf_slurp_symbol_table): Translate STT_IFUNC into
BSF_INDIRECT_FUNCTION.
* elflink.c (_bfd_elf_adjust_dynamic_reloc_section): Add support
for STT_IFUNC symbols.
(get_ifunc_reloc_section_name): New function.
(_bfd_elf_make_ifunc_reloc_section): New function.
* elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs field.
* bfd-in2.h: Regenerate.
gas/
* config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type.
* doc/as.texinfo: Document new feature.
* NEWS: Mention new feature.
gas/testsuite/
* gas/elf/type.s: Add test of STT_IFUNC symbol type.
* gas/elf/type.e: Update expected disassembly.
* gas/elf/elf.exp: Update grep of symbol types.
ld/
* NEWS: Mention new feature.
* pe-dll.c (process_def_file): Replace use of redundant
BFD_FORT_COMM_DEFAULT_VALUE with 0.
* scripttempl/elf.sc: Add .rel.ifunc.dyn and .rela.ifunc.dyn
sections.
ld/testsuite/
* ld-mips-elf/reloc-1-n32.d: Updated expected output for reloc
descriptions.
* ld-mips-elf/reloc-1-n64.d: Likewise.
* ld-i386/ifunc.d: New test.
* ld-i386/ifunc.s: Source file for the new test.
* ld-i386/i386.exp: Run the new test.
* scripttempl/avr.sc (.bss): Set lma when relocating.
(.bss, .noinit): No need to set vma when relocating.
(.text, .bss, ,noinit): Set vma to zero when not relocating.
2008-01-11 Tristan Gingold <gingold@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* ldlang.c (lang_end): Warns if the entry point is not found when
--gc-sections.
Emit an error if no root is specified when --gc-sections -r.
* ld.texinfo (Options): Document that --gc-sections is compatible
with -r and -q.
* ldmain.c (main): Do not error out if -r and --gc-sections.
* scripttempl/elf.sc: Emit ENTRY command only if relocating.
ld/testsuite:
2008-01-11 Tristan Gingold <gingold@adacore.com>
* lib/ld-lib.exp (check_gc_sections_available): Now available on
VxWorks.
* ld-gc: New directory for testing --gc-sections.
* ld-gc/gc.c: New file.
* ld-gc/gc.exp: New file.
* ld-gc/noent.s: New file.
* ld-gc/noent.d: New file.
* genscript.sh: Add support for generating a .xa script for use with the --auto-import option.
* ld.texinfo: Document the new behaviour of the --auto-import option.
* ldint.texinfo: Document new script generation.
* emulparams/i386pe.sh (GENERATE_AUTO_IMPORT): Define.
* emulparams/i386pe_posix.sh (GENERATE_AUTO_IMPORT): Define.
* emulparams/i386pep.sh (GENERATE_AUTO_IMPORT): Define.
* emultemp/pe.em (..._get_script): Support the use of the auto import script.
* scripttempl/pe.sc: Put the .rdata input sections into the .data output section when creating an auto import script.
* scripttempl/pep.sc: Likewise.
PR ld/3249
* scripttempl/elf.sc: Don't combine .gnu.linkonce.d.*personality*
and .gnu.linkonce.wi.* sections with .data and .debug_info for
relocatable link.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
