* sim-main.h (status_UX, status_SX, status_KX, status_TS)
(status_PX, status_MX, status_CU0, status_CU1, status_CU2)
(status_CU3): New definitions.
* sim-main.h (ExceptionCause): Add new values for MIPS32
and MIPS64: MDMX, MCheck, CacheErr. Update comments
for DebugBreakPoint and NMIReset to note their status in
MIPS32 and MIPS64.
(SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck)
(SignalExceptionCacheErr): New exception macros.
* mips.igen (check_fpu): Enable check for coprocessor 1 usability.
* sim-main.h (COP_Usable): Define, but for now coprocessor 1
is always enabled.
(SignalExceptionCoProcessorUnusable): Take as argument the
unusable coprocessor number.
* mips.igen (check_fmt, check_fmt_p): New functions to check
whether specific floating point formats are usable.
(ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt)
(FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt)
(ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W):
Use the new functions.
(do_c_cond_fmt): Remove format checks...
(C.cond.fmta, C.cond.fmtb): And move them into all callers.
* mips.igen (loadstore_ea): New function to do effective
address calculations.
(do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store,
do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1,
CACHE): Use loadstore_ea to do effective address computations.
* mips.igen (PREFX): Tweak instruction opcode fields (i.e.,
add a comma) so that it more closely match the MIPS ISA
documentation opcode partitioning.
(PREF): Put useful names on opcode fields, and include
instruction-printing string.
* mips.igen (check_u64): New function which in the future will
check whether 64-bit instructions are usable and signal an
exception if not. Currently a no-op.
(DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL,
DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB,
DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1,
LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64.
* mips.igen (check_fpu): New function which in the future will
check whether FPU instructions are usable and signal an exception
if not. Currently a no-op.
(ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb,
CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt,
CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1,
LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf,
MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt,
NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt,
ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1,
SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu.
* mips.igen (do_load_left, do_load_right): Move to be immediately
following do_load.
(do_store_left, do_store_right): Move to be immediately following
do_store.
* mips.igen: Add some additional comments about supported
models, and about which instructions go where.
(BC1b, MFC0, MTC0, RFE): Sort supported models in the same
order as is used in the rest of the file.
* mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment
indicating that ALU32_END or ALU64_END are there to check
for overflow.
(DADD): Likewise, but also remove previous comment about
overflow checking.
* mips.igen (ADDI): Print immediate value.
(BREAK): Print code.
(DADDIU, DSRAV, DSRLV): Print correct instruction name.
(SLL): Print "nop" specially, and don't run the code
that does the shift for the "nop" case.
* igen.c (main): Change -I to add include paths for :include:
files.
Implement -G as per sim/igen, with just gen-icache=N support.
Call load_insn_table() with the built include path.
* ld-insn.c (parse_include_entry): New. Load an :include: file.
(load_insn_table): New `includes' argument. Look for :include:
entries and call parse_include_entry() for them.
(main): Adjust load_insn_table() call.
* ld-insn.h (model_include_fields): New enum.
(load_insn_table): Update prototype.
* table.c (struct _open_table, struct _table): Rework
structures to handle included files.
(table_push): Move the guts of table_open() here.
* table.c (struct _open table, struct table): Make table object an
indirect ptr to the current table file.
(current_line, new_table_entry, next_line): Make file arg type
open_table.
(table_open): Use table_push.
(table_entry_read): Point variable file at current table, at eof, pop
last open table.
* misc.h (NZALLOC): New macro. From sim/igen.
* table.h, table.c (table_push): New function.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
* sim-events.c (sim_events_remain_time): New function returning
the time that remains before the event is raised.
* hw-events.c (hw_event_remain_time): Likewise.
* sim-events.h (sim_events_remain_time): Declare.
* hw-events.h (hw_event_remain_time): Declare.
* sim-hw.c: Use <errno.h> instead of <sys/errno.h>
(OPTION_HW_LIST): New option --hw-list to list the devices.
(hw_option_handler): List the device tree with 'sim_hw_print'.
* sim-bits.h (_MSB_16, _LSB_16): Define for 16-bit targets.
(MASK, LSBIT, MSBIT): Likewise and use _MSB_16 and _LSB_16.
(EXTENDED): Define for 16-bit word size.
* sim-bits.c (LSEXTRACTED, MSEXTRACTED, LSINSERTED,
MSINSERTED, LSSEXT, MSSEXT): Implement for 16-bit word size.
* sim-types.h: Added support for 16-bit targets.
(ARM_Strong_Prop, STRONGARM): Define.
* arminit.c (ARMul_NewState): Reset is_StrongARM.
(ARMul_SelectProcessor): Set is_StrongARM.
* wrapper.c (sim_create_inferior): Use bfd machine type to
determine processor type to emulate.
* armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
when emulating StrongARM.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
* armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
extracted from state->Cpsr, but preserve the unused bits.
(ARMul_GetCPSR): Get bits preserved in state->Cpsr.
(ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
get the full CPSR word.
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
2000-06-20 Frank Ch. Eigler <fche@redhat.com>
* compile.c: Don't include "wait.h".
(sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
instead of WIF* from host.
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
genericXor, genericBtst): Use `unsigned32'.
* op_utils.c: Likewise.
* mn10300.igen, am33.igen: Use `unsigned32', `signed32',
`unsigned64' or `signed64' where type width is relevant.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
2000-03-11 Philip Blundell <philb@gnu.org>
* armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
Patch from Allan Skillman <Allan.Skillman@arm.com>.
* cgen-fpu.h: Rename extsfdf to fextsfdf. Rename truncdfsf to
ftruncdfsf.
* cgen-accfp.c (fextsfdf): New function.
(ftruncdfsf): New function.
(cgen_init_accurate_fpu): Initialize fextsfdf and ftruncdfsf.
2000-03-08 Dave Brolley <brolley@redhat.com>
* cgen-par.h (cgen_write_queue_kind): Add CGEN_FN_SF_WRITE.
(CGEN_WRITE_QUEUE_ELEMENT): Add fn_sf_write.
(sim_queue_fn_si_write): Last argument is has type USI.
(sim_queue_fn_sf_write): New function.
* cgen-par.c (sim_queue_fn_si_write): Declare 'value' as USI.
(sim_queue_fn_sf_write): New function.
(cgen_write_queue_element_execute): Handle CGEN_FN_SF_WRITE.
* merge from internal repo -> sourceware
2000-03-02 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated.
Tue Feb 8 18:35:01 2000 Donald Lindsay <dlindsay@hound.cygnus.com>
* interp.c, mips.igen: all 5 DEADC0DE situations now have sim_io_eprintf
calls, conditional on the simulator being in verbose mode.
instead of sim_trace() to run the program; include support for ``-o''
option (operating environment); when a signal occurs, only continue
execution when operating environment mode.
Update d10v.
* sparc-desc.h: New file.
* sparc-opc.h: New file.
* decode64.c: New file.
* decode64.h: New file.
* sem64.c: New file.
* cpu64.c: New file.
* cpu64.h: New file.
* model64.h: New file.
* mloop64.in: New file.
* regs64.h: New file.
* trap64.c: New file.
* cpu32.h,decode32.c,decode32.h,model32.c,sem32.c: Rebuild.
1999-02-05 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_tickle): After a polled I/O from the
CPU, start periodic background I/O polls.
(tx3904sio_poll): New function: periodic I/O poller.
(PROFILE_USEFUL_MASK): New macro.
* sim-profile.c (profile_options): Make like trace_options, allow
optional on|off arg where applicable.
(set_profile_option_mask): New function.
(sim_profile_set_option): New function.
(profile_option_handler): Simplify.
Have -p only enable selected things, not everything.
Add missing break to OPTION_PROFILE_PC_RANGE.
* cgen-scache.c (scache_options): Allow optional on|off arg to
--profile-scache.
(scache_option_handler): Use sim_profile_set_option.
for internal PR 18869 and 18870.
1999-01-26 Frank Ch. Eigler <fche@cygnus.com>
* sim-memopt.c (memory_options): Add MEMORY_FILL option.
(memory_option_handler): Implement MEMORY_FILL option. Make
MEMORY_CLEAR an alias for MEMORY_FILL=0.
(parse_ulong_value): New function.
(do_memopt_add): Allocate all buffers. Optionally fill them.
(CGEN_MAIN_SCM): Add rtx-funcs.scm.
(cgen-arch): Pass $(mach) to cgen.sh.
* cgen-engine.h (SEM_BRANCH_FINI): New arg pcvar, all uses updated.
(SEM_BRANCH_INIT_EXTRACT): New macro.
(SEM_BRANCH_INIT): Add taken_p.
(TARGET_SEM_BRANCH_FINI): Provide default definition.
(SEM_BRANCH_FINI): Use it.
(SEM_INSN): Update.
* cgen-run.c (sim_resume): Handle tracing of last insn.
* cgen-scache.h (WITH_SCACHE): Define as 0 if not defined.
* cgen-trace.c (current_abuf): New static global.
(trace_insn_init): Initialize it.
(trace_insn_fini): Use it.
(trace_insn): Set it.
* cgen.sh (arch case): Pass -m ${mach} to cgen.
* genmloop.sh (@cpu@_emit_before): Only define if WITH_SCACHE_PBB.
(@cpu@_emit_after): Ditto.
(simple @cpu@_engine_run_full): New local `pc'. Initialize semantic
labels if WITH_SEM_SWITCH_FULL.
* sim-model.c: Include bfd.h.
(sim_model_init): New function.
(sim_model_install): Record init fn.
* sim-model.h (MACH): New member bfd_name.
* sim-module.c (modules): Initialize model before scache.
[ChangeLog]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (BREAK): Call signal_exception instead of sim_engine_halt.
start-sanitize-sky
* interp.c (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook.
Call sim_engine_halt on BreakPoint.
end-sanitize-sky
[ChangeLog.sky]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* sky-gdb.c (sky_sim_engine_halt): Do not set CIA here.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (sim_open): Allocate jm3904 memory in smaller chunks.
(load_word): Call SIM_CORE_SIGNAL hook on error.
(signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before
starting. For exception dispatching, pass PC instead of NULL_CIA.
(decode_coproc): Use COP0_BADVADDR to store faulting address.
* sim-main.h (COP0_BADVADDR): Define.
(SIM_CORE_SIGNAL): Define hook to call mips_core_signal.
(SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* mips.igen (*): Replace memory-related SignalException* calls
with references to SIM_CORE_SIGNAL hook.
* dv-tx3904irc.c (tx3904irc_port_event): printf format warning
fix.
* sim-main.c (*): Minor warning cleanups.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
* interp.c (sim_open): Add stub mn103002 cache control memory regions.
Set OPERATING_ENVIRONMENT on "stdeval1" board.
(mn10300_core_signal): New function to intercept memory errors.
(program_interrupt): New function to dispatch to exception vector
(mn10300_exception_*): New functions to snapshot pre/post exception
state.
* sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
(SIM_ENGINE_HALT_HOOK): Do nothing.
(SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
Various endianness and warning fixes.
* mn10300.igen (illegal): Call program_interrupt on error.
(break): Call program_interrupt on breakpoint
Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
merged in:
* dv-mn103int.c (mn103int_ioctl): New function for NMI
generation. (mn103int_finish): Install it as ioctl handler.
* dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
1998-12-24 Frank Ch. Eigler <fche@cygnus.com>
* dv-sockser.c (DEFAULT_TIMEOUT): Increase to 1 ms.
* nrun.c (main): Remain in simulation loop for traps and
exceptions when in operating environment mode.
(ui_loop_hook): New stub hook for standalone use.
* sim-events.c (sim_events_process): Call ui_loop_hook
periodically on CYGWIN host.
* sim-reason.c (sim_stop_reason): Return host signal numbers
to gdb on sim_stopped and sim_signalled cases.
* sim-engine.c (sim_engine_halt): Call SIM_CPU_EXCEPTION_SUSPEND
hook just before longjmp.
* sim-resume.c (sim_resume): Call SIM_CPU_EXCEPTION_RESUME
hook just before sim_engine_run.
* sim-n-core.h (sim_core_trace_M): Allay const warning.
* sim-trace.h (trace_generic): Ditto.
* sim-trace.c (trace_generic): Ditto.
* sim/fr30/ldres.cgs: New testcase.
* sim/fr30/stres.cgs: New testcase.
* sim/fr30/copop.cgs: New testcase.
* sim/fr30/copld.cgs: New testcase.
* sim/fr30/copst.cgs: New testcase.
* sim/fr30/copsv.cgs: New testcase.
* sim/fr30/nop.cgs: New testcase.
* sim/fr30/andccr.cgs: New testcase.
* sim/fr30/orccr.cgs: New testcase.
* sim/fr30/addsp.cgs: New testcase.
* sim/fr30/stilm.cgs: New testcase.
* sim/fr30/extsb.cgs: New testcase.
* sim/fr30/extub.cgs: New testcase.
* sim/fr30/extsh.cgs: New testcase.
* sim/fr30/extuh.cgs: New testcase.
* sim/fr30/enter.cgs: New testcase.
* sim/fr30/leave.cgs: New testcase.
* sim/fr30/xchb.cgs: New testcase.
* sim/fr30/dmovb.cgs: New testcase.
* sim/fr30/dmov.cgs: New testcase.
* sim/fr30/dmovh.cgs: New testcase.
* sim/fr30/testutils.inc (take_branch{_d},no_branch{_d}): New macros.
* sim/fr30/ret.cgs: Add tests fir ret:d.
* sim/fr30/inte.cgs: New testcase.
* sim/fr30/reti.cgs: New testcase.
* sim/fr30/bra.cgs: New testcase.
* sim/fr30/bno.cgs: New testcase.
* sim/fr30/beq.cgs: New testcase.
* sim/fr30/bne.cgs: New testcase.
* sim/fr30/bc.cgs: New testcase.
* sim/fr30/bnc.cgs: New testcase.
* sim/fr30/bn.cgs: New testcase.
* sim/fr30/bp.cgs: New testcase.
* sim/fr30/bv.cgs: New testcase.
* sim/fr30/bnv.cgs: New testcase.
* sim/fr30/blt.cgs: New testcase.
* sim/fr30/bge.cgs: New testcase.
* sim/fr30/ble.cgs: New testcase.
* sim/fr30/bgt.cgs: New testcase.
* sim/fr30/bls.cgs: New testcase.
* sim/fr30/bhi.cgs: New testcase.
* sim/fr30/call.cgs: Test ret here as well.
* sim/fr30/ld.cgs: Remove bogus comment.
* sim/fr30/testutils.inc (save_rp,restore_rp): New macros.
* sim/fr30/div.ms: New testcase.
* sim/fr30/st.cgs: New testcase.
* sim/fr30/sth.cgs: New testcase.
* sim/fr30/stb.cgs: New testcase.
* sim/fr30/mov.cgs: New testcase.
* sim/fr30/jmp.cgs: New testcase.
* sim/fr30/ret.cgs: New testcase.
* sim/fr30/int.cgs: New testcase.
Set mips_fpu, and mips_fpu_bitsize.
Set sim_gen, and sim_igen_machine.
* configure: Rebuild.
* mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts.
* sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR.
* sim/fr30/div0s.cgs: New testcase.
* sim/fr30/div0u.cgs: New testcase.
* sim/fr30/div1.cgs: New testcase.
* sim/fr30/div2.cgs: New testcase.
* sim/fr30/div3.cgs: New testcase.
* sim/fr30/div4s.cgs: New testcase.
* sim/fr30/testutils.inc (mvi_h_dr,set_dbits,test_dbits): New Macros.
1998-12-10 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes.
(tx3904sio_tickle): fflush after a stdout character output.
* sim/fr30/testutils.inc (set_s_user): Correct Mask.
(set_s_system): Correct Mask.
* sim/fr30/ld.cgs (ld): Move previously failing test back
into place.
* sim/fr30/ldm0.cgs: New testcase.
* sim/fr30/ldm1.cgs: New testcase.
* sim/fr30/stm0.cgs: New testcase.
* sim/fr30/stm1.cgs: New testcase.
* configure: Regenerate.
* sim-main.h: Protect against multiple inclusion.
Don't include cgen-scache.h,cgen-cpu.h,cgen-trace.h,cpuall.h.
Done by cgen-sim.h now.
* tconfig.in (SIM_HAVE_MODEL): Delete, moved to cgen-types.h.
* cpuall.h: Regenerate.
* cpu.h,decode.c,sem-switch.c,sem.c: Regenerate.
* mloop.in (extract16): Make static inline again.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(extract32): Ditto.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(execute): Test ARGBUF_PROFILE_P before profiling.
Update calls to TRACE_INSN_INIT,TRACE_INSN_FINI.
* cpux.h,decodex.c,modelx.c,semx-switch.c: Regenerate.
* mloopx.in: Rewrite.
* cgen-sim.h: Simple header that includes others.
* sim-arange.c: New file.
* sim-arange.h: New file.
* sim-basics.h: Include it.
* Make-common.in (SIM_NEW_COMMON_OBJS): Add sim-arange.o.
(sim-arange.o): Add rule for.
* sim-cpu.h (sim_cpu_msg_prefix): Add prototype.
(sim_io_eprintf_cpu): Add prototype.
* sim-inline.h (HAVE_INLINE): Define if GNUC.
(INLINE2): New macro.
(EXTERN_INLINE): New macro.
* sim-module.c (sim_post_argv_init): Initialize cpu backlink
before calling module init fns.
* sim-profile.h (OPTION_PROFILE_*): Move into enum.
(profile_init): New function.
(profile_options): New option --profile-range.
(profile_option_handler): Handle --profile-range.
(profile_print_insn): Qualify address range specific section titles.
(profile_print_addr_ranges): New function.
(profile_info): Print address ranges if specified.
(profile_install): Set profile_init init fn.
* sim-profile.h (PROFILE_DATA): New member `range'.
* sim-trace.c (trace_init): New function.
(trace_options): New option --trace-range.
(trace_option_handler): Handle --trace-range.
(trace_install): Set trace_init init fn.
* sim-trace.h (TRACE_DATA): New member `range'.
* sim-utils.c (sim_cpu_msg_prefix): New function.
(sim_io_eprintf_cpu): New function.
* cgen-engine.h (PC_IN_TRACE_RANGE_P): New macro.
(PC_IN_PROFILE_RANGE_P): New macro.
* cgen-trace.c (trace_insn_init): Set current_insn to NULL.
(trace_insn_fini): New arg abuf. All callers updated.
Exit early if trace_insn not called. Check ARGBUF_PROFILE_P before
printing cycle counts.
* cgen-trace.h (trace_insn_fini): Update prototype.
(TRACE_RESULT_P): New macro.
(TRACE_INSN_INIT,TRACE_INSN_FINI): New arg abuf. All callers updated.
(TRACE_INSN): Check ARGBUF_TRACE_P.
(TRACE_EXTRACT,TRACE_RESULT): New arg abuf. All callers updated.
* cgen-types.h (SIM_INLINE): Delete.
(SIM_HAVE_MODEL,SIM_HAVE_ADDR_RANGE): Define.
* cgen-utils.c: Don't include cgen-engine.h
* genmloop.sh (@cpu@_fill_argbuf): New function.
(@cpu@_fill_argbuf_tp): New function.
(@cpu@_emit_before,@cpu@_emit_after): New functions.
(@cpu@_pbb_begin): Prefix cti_sc,insn_count with '_'.
(SET_CTI_VPC,SET_INSN_COUNT): Update.
(@cpu@_pbb_before): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_INIT,TRACE_INSN_FINI.
(@cpu@_pbb_after): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_FINI.
* sim/fr30/ld.cgs: Implement more loads.
* sim/fr30/call.cgs: New testcase.
* sim/fr30/testutils.inc (testr_h_dr): New macro.
(set_s_user,set_s_system): New macros.
[common/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* sim-gx-run.c (sim_engine_run): Use new tgx_info struct to
collect run-time arguments to gx block.
* sim-gx.h (sim_gx_function): Corresponding signature change.
* sim-gx.c (sim_gx_compiled_block_f): Remove nonfunctional code to
again compile a gx block source file.
(sim_gx_compiled_block_dispose): Uninstall obsoleted gx block
shared libraries.
(sim_gx_block_translate): Always emit new "gx_label_NNNN" labels,
for basic block entry points, even if !__GNUC__.
[m32r-gx/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* Makefile.in (SIM_OBJS): Don't build sim-core.o.
* configure.in: Added --enable-sim-inline support.
Look for "getenv()" function.
* configure: Rebuilt.
* config.in: Rebuilt.
* gx-translate.c: Include "sim-inline.c" for sim-core inlining.
(m32r_gx_{load,store}*): Update signature.
(tgx_emit_pre_function): Emit new "tgx_info" struct, update
callback function signatures.
(m32r_emit_*_insn): Use new callback signatures. For all short
branches in optimized mode, emit direct "goto gx_label_NNNN".
(tgx_optimize_test): If the GX_OPTIMIZE environment variable is
set, allow its integer value to override the optimization heuristic.
* m32r-sim.h: New empty placeholder file.
* sim-main.c: New empty placeholder file.
* sim-if.c (sim_create_inferior): Use NULL instead of &abort
for unimplemented register fondling functions.
* sim-main.h: Add multiple inclusion guard. Update callback
function signatures.
(tgx_info): New struct for collecting gx block invocation
arguments.
v850/simops.c, d10v/simops.c, v850/Makefile.in, d10v/Makefile.in:
Include targ-vals.h instead of syscall.h. Replace SYS_* with
TARGET_SYS_*. Add dependency.
z8k/support.c: Include <errno.h>
v850/simops.c: Replace long with portable signed32.
mips/interp.c: Make sim_monitor global - needed by sky.
(CGEN_ARCH_SCM): New variable.
* cgen-engine.h (EXTRACT_[ML]SB0_{INT,UINT}): New macros.
(EXTRACT_INT,EXTRACT_UINT): New macros.
(SEM_SEM_ARG): New macro.
(SEM_NEXT_VPC): New arg `pc'.
* cgen-sim.h (EXTRACT_SIGNED,EXTRACT_UNSIGNED): Delete.
(sim_disassemble_insn): Update prototype.
* cgen-trace.c (current_insn,insn_fields): New static locals.
(trace_insn): Set them.
* cgen-utils.scm: #include cgen-engine.h.
(sim_disassemble_insn): New arg insn_fields.
Handle variable length insns.
* genmloop.sh: Only emit pbb decls if -pbb.
(${cpu}_scache_lookup): New arg `vpc'.
(scache support): Fetch pc before entering loop.
[d30v/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0.
[testsuite/d30v-elf/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* do-shifts.S: Add test for large mvfacc shifts.
HAVE_PARALLEL_INSNS, define as 0 or 1. Emit decls of fns in mloop.cin.
* cgen-engine.h: Typedefs of IADDR,CIA,SEM_ARG,SEM_PC moved ...
* cgen-sim.h: ... to here.
Thu Oct 29 12:07:06 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-psrlvw.s (test_psrlvw): Add test for sign-extension in insn.
* t-padsbh.s: New test.
* t-mult1.s: New test.
* Makefile.in: Run them.
routine as the number of bytes to process. This apparently is due to
text-mode vs binary-mode. If the mounts are done text-mode, then the
size returnedby fstat() may be different than the number of bytes
"read" in text mode.
(sim-core.o): Delete duplicate dependence on $(SIM_EXTRA_DEPS).
(sim-cpu.o,sim-endian.o,sim-hw.o): Ditto.
(cgen-run.o,cgen-scache.o,cgen-trace.o,cgen-utils.o): Delete
explicit cgen header dependencies, require SIM_EXTRA_DEPS to include
CGEN_INCLUDE_DEPS.
* cgen-cpu.h: New file.
* cgen-engine.h: New file.
* cgen-scache.h: New file.
* cgen-sim.h: Delete portions moved to new files.
* genmloop.sh: Generate two files eng.hin,mloop.cin explicitly,
rather than sending result to stdout.
(cgen-run.o): New rule.
* cgen-ops.h: Delete many BI macros. Change all UBI -> BI.
* cgen-run.c (prime_cpu): New function.
* cgen-scache.c: Add pseudo-basic-block (pbb) scaching support.
(scache_option_handler, case OPTION_PROFILE_SCACHE): Handle explicitly
mentioned cpu.
(scache_flush_cpu,scache_lookup,scache_lookup_or_alloc): New fns.
* cgen-sim.h (CGEN_INSN_VIRTUAL_TYPE): New enum.
(CGEN_INSN_VIRTUAL_P): New macro.
(SEM_PC): New typedef.
(SEMANTIC_FN): Change type of result to SEM_PC.
(SEM_SET_FULL_CODE,SEM_SET_FAST_CODE,SEM_SET_CODE): New macros.
(IDESC_CTI_P,IDESC_SKIP_P): New macros.
(SCACHE_MAP): New typedef.
(CPU_SCACHE): Add pbb support.
(scace_lookup,scache_lookup_or_alloc,scache_flush_cpu): Declare.
(SEM_BRANCH_INIT_EXTRACT,SEM_BRANCH_INIT,SEM_BRANCH_FINI): New macros.
(CGEN_CPU): New members running_p,insn_count,{fast,full}_engine_fn,
max_slice_insns.
(INSN_NAME): Delete.
(cgen_insn_name): Declare.
(sim_engine_invalid_insn): Renamed from sim_engine_illegal_insn.
* cgen-trace.c (trace_buf): Shrink from 1024 to 256 bytes.
(first_insn_p): Make static.
(trace_insn): Handle virtual insns specially.
(cgen_trace_printf): Ensure we haven't overflowed the buffer.
* cgen-types.h (UBI): Delete.
(MODE_TYPE): New enum.
(HOSTINT,HOSTUINT,HOSTPTR): Delete.
* cgen-utils.c (mode_names): Delete UBI. Add INT,UINT,PTR.
(cgen_virtual_opcode_table): New global.
(cgen_insn_name): New function.
(sim_disassemble_insn): Ignore virtual insns.
* genmloop.sh: Delete top level loop generation. Add pbb support.
* sim-cpu.h (CPU_INSN_NAME_FN): New typedef.
(sim_cpu_base): New members max_insns,insn_name,model_data.
(CPU_PC_GET,CPU_PC_SET): New macros.
(sim_pc_get,sim_pc_set): Declare.
* sim-model.c (model_set): Call model init fn.
* sim-model.h (MODEL_FN): New typedef.
(INSN_TIMING): New member model_fn.
(MODEL): New members num,init.
* sim-profile.c (sim_profile_print_bar): Renamed from print_bar.
All callers updated.
(profile_insn_init): New fn.
(profile_print_insn): Update, INSN_NAME -> CPU_INSN_NAME.
Exit early if insn profiling not supported.
(profile_print_memory): Update, MAX_MODES -> MODE_TARGET_MAX.
(profile_install): Record profile_insn_init as init fn.
(profile_uninstall): Free PROFILE_INSN_COUNT if non-null.
* sim-profile.h: Update, MAX_MODES -> MODE_TARGET_MAX.
(PROFILE_DATA): Delete member exec_time.
Change insn_count to pointer to array, rather than the array.
(sim_profile_print_bar): Declare.
Fri Sep 4 10:37:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (mtsab): Correct typo in input register.
* sim-main.h (TMP_*): New macros for accessing local 128-bit
temporary for multimedia instructions.
* r5900.igen (*): Convert most instructions to use new TMP
macros to store output result during computation.
* interp.c: use NUM_CORE_REGS
* sky-gdb.c (set_fifo_breakpoints): use VIF interrupt bit for break
* sky-pke.c (pke_issue): use interrupt bit for break points
Hack sanitize so that it doesn't sanitize vrXXX when either of
keep-vr5400 or keep-vr4320 are specified.
Move two basic vr4100 instructions from mips.igen to vr.igen.
* op_utils.c (do_syscall): Rewrite to use common/syscall.c.
(syscall_read_mem, syscall_write_mem): New functions for syscall
callbacks.
* mn10300_sim.h: Add prototypes for syscall_read_mem and
syscall_write_mem.
* mn10300.igen: Change C++ style comments to C style comments.
Check for divide by zero in div and divu ops.
Do not sign extend immediate for mov imm,XRn.
More random mul, mac & div fixes.
Remove some unused variables.
Sign extend 24bit displacement in memory addresses.
Whee, more fixes.
Minor fixes in multiply/divide patterns.
start-sanitize-am33
* am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
fixes to 2 register multiply, divide and mac instructions. Set
Z,N correctly for sat16. Sign extend 24 bit immediate for add,
and sub instructions.
* am33.igen: Add remaining non-DSP instructions.
end-sanitize-am33
(CPU_SCACHE_HASH_MASK): New macro.
(SCACHE_HASH_PC): Rewrite.
* genmloop.sh (engine_resume_{full,fast}): Move some of hash
computation out of main loop.
* dv-mn103tim.c: Include sim-assert.h
* dv-mn103ser.c (do_polling_event): Check for incoming data on
serial line and schedule next polling event.
(read_status_reg): schedule events to check for incoming data on
serial line and issue interrupt if necessary.
* sky-pke.c(read_pke_pcx): return index of current pc
* sky-pke.h: export read_pke_pcx
* interp.c(sim_fetch_registers): read pke pc/pcx
* sky-libvpe.c: track name change from GDB
* sim-main.h: add vif memory based pc
- extend gdb comm area for fifo breakpoints
- define SIM_ENGINE_RESTART_HOOK
* sky-gdb.c: add support for VIF breakpoints
Tue Jun 16 09:03:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-cop2.s: Reorder instruction blocks to prevent "Out of bounds"
messages during test execution. Added dummy branch labels for BC2*
instructions.
* t-cop2.brn: Use --sky-debug option instead of env var.
* t-cop2.vuexpect: Updated for with new disassembly format.
* sky_sce_fast.exp: Don't compare GIF outputs for
--float-type=fast.
* sce_test{17,33,49}.dvpasm: Use ".DmaPackVif 1" option to
exercise assembler / PKE.
* rw-vureg.c: Cast memcpy operand to allay warning.
any open file handles before exiting
* sky-gpuif.[c|h]: add disassembly on the fly code, log and log
file option support
* sky-gdb.[c|h] (sky_command_options_close()): new function, added
some body to the log and log file option sections
which is now a list of options controlling the behaviour of sim_run.
* sim/sky/sky-defs.tcl (run_trc_test): Update to new way of
environment variables to sim_run.
* dv-mn103int.c (external_group): Use enumerated types to access
correct group addresses.
* dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
triggers an interrupt on the higher-numbered timer's port.
Wed Jun 10 15:56:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim/sky/t-int.c: New file to test sky hardware
interrupts.
* sim/sky/t-int-handler.s: New file for null interrupt
handler.
* sim/sky/t-int.brn: New file to build new test.
Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
It is not yet properly tested.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
byte-swapping unnecessary. Add -sparclite-board option for
emulating RAM found on typical SPARClite boards. Print
error message for unrecognized option.
* erc32.c: Change RAM address and size from constants to variables,
to allow emulation of SPARClite board RAM.
(fetch_bytes, store_bytes): New helper functions for revamped
mememory_read and memory_write.
(memory_read, memory_write): Rewrite to store bytes in target
byte order instead of storing words in host byte order; this
greatly simplifies support of little-endian programs.
(get_mem_ptr): Remove unnecessary byte parameter.
(sis_memory_write, sis_memory_read): Store words in target
byte order instead of host byte order.
(byte_swap_words): Remove, no longer needed.
* sis.h ((byte_swap_words): Remove declaration, no longer needed.
(memory_read): Add new sz parameter.
* sis.c (run_sim): Use revamped memory_read, which makes
byte-swapping unnecessary.
* exec.c (dispatch_instruction): Use revamped memory_read, which
makes byte-swapping and double-word fetching unnecessary.
* func.c (sparclite_board): Declare new variable.
(get_regi): Handle little-endian data.
(bfd_load): Recognize little-endian SPARClite as having
little-endian data.
* armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
of ":tt" to catch stdin in addition to stdout.
(ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
or success of lseek().
From PR 15839, modified a bit by me to appease my sense of style--but
not too much because I am lazy.
Mon Jun 1 18:54:22 1998 Frank Ch. Eigler <fche@cygnus.com>
* lib/sim-defs.exp (sim_run): Add possible environment variable
list to simulator run.
start-sanitize-sky
* sim/sky/sky-defs.tcl: Use it.
* sim/sky/t-pke2.vif1out: Update to match recent word-precise
tracking table change in sim/mips/sky-pke.c.
* sim/sky/t-pke3.trc: Ditto.
* sim/sky/t-pke4.vif0expect: Ditto.
end-sanitize-sky
Mon May 18 10:37:47 1998 Doug Evans <devans@canuck.cygnus.com>
* mloopx.in (extract): Set abuf.addr for proper fill nop counting.
(execute): Count parallel insns.
* sim-if.c (print_m32r_misc_cpu): Print count.
* sim-main.h (M32R_MISC_PROFILE): New member parallel_count.
(trace_insn_init): Set it.
(trace_insn_fini): Use TRACE_PREFIX.
(trace_insn): Rewrite to use trace_prefix.
* sim-trace.c (trace_prefix): Don't print filename arg if NULL.
Adjust width accordingly.
* sim-profile.h (PROFILE_DATA): New member profile_any_p.
(PROFILE_ANY_P,PROFILE_INSN_P,PROFILE_MEMORY): New macros.
(PROFILE_SCACHE_P,PROFILE_PC_P,PROFILE_CORE_P): New macros.
(PROFILE_COUNT_INSN,PROFILE_COUNT_READ,PROFILE_COUNT_WRITE): Simplify.
(PROFILE_COUNT_CORE): Simplify.
* sim-profile.c (profile_option_handler): Compute profile_any_p.
* Followup patch for SCEI PR 15853
* First check-in of TX3904 interrupt controller devices for ECC. [sanitized]
* First implementation of MIPS hardware interrupt emulation.
Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware
modules. Recognize TX39 target with "mips*tx39" pattern.
* configure: Rebuilt.
* sim-main.h (*): Added many macros defining bits in
TX39 control registers.
(SignalInterrupt): Send actual PC instead of NULL.
(SignalNMIReset): New exception type.
* interp.c (board): New variable for future use to identify
a particular board being simulated.
(mips_option_handler,mips_options): Added "--board" option.
(interrupt_event): Send actual PC.
(sim_open): Make memory layout conditional on board setting.
(signal_exception): Initial implementation of hardware interrupt
handling. Accept another break instruction variant for simulator
exit.
(decode_coproc): Implement RFE instruction for TX39.
(mips.igen): Decode RFE instruction as such.
start-sanitize-tx3904
* configure.in (tx3904cpu,tx3904irc): Added devices for tx3904.
* interp.c: Define "jmr3904" and "jmr3904debug" board types and
bbegin to implement memory map.
* dv-tx3904cpu.c: New file.
* dv-tx3904irc.c: New file.
end-sanitize-tx3904
* sim-engine.h (sim_engine_set_run_state): Declare.
* genmloop.sh (pending_reason,pending_sigrc): New static locals.
(@cpu@_engine_stop): New args reason,sigrc. All callers updated.
(engine_resume): Reorganize. Allow synchronous exit from main loop.
* exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
* (mul64): Simplify calculation of negative result.
* (div64): New helper function for 64-bit division.
* (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
and UDIVCC.
Replace check_op_hilo with check_mult_hilo and check_div_hilo.
Add special r3900 version of do_mult_hilo.
(do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo
with calls to check_mult_hilo.
(do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo
with calls to check_div_hilo.
for VU memory tracking tables.
Thu May 7 12:15:41 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-pke.c (pke_pcrel_operand_bits): Compute word-resolution
source address for UNPACK into VU MEM.
(pke_code_mpg): Ditto for MPG into VU uMEM.
Instead save them in the sim_hw structure.
*) Route sim-core accesses to hw devices through the sim_hw module.
*) Route hw device requests to abort/halt through the sim_hw module.
*) Add print parameter to hw_tree_print() function.
*) Add sim_engine_vabort () function.
* common/aclocal.m4: call AM_EXEEXT in SIM_AC_COMMON, define
AM_CYGWIN32 and AM_EXEEXT.
* common/Make-common.in: set EXEEXT, add missing EXEEXTs
to run and install-common rules.
* common/configure: regenerate
And update all subdirectory ChangeLogs and configure files.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
../common' to autoconf and autoheader. Unconditionally run
autoconf in every subdir.
(autoconf-changelog autoheader-changelog): Unconditionally run
commands in every subdir.
(autoconf-install autoheader-install): Likewise.
* config.in: Ditto.
* Makefile.in (top_builddir): New macro.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(psim): Depend on INTLDEPS; link against INTLLIBS.
* configure.in: Call CY_GNU_GETTEXT.
* config.in: Ditto.
* acconfig.h: New file.
* Make-common.in (top_builddir): New macro.
(INTL_LIB): Removed.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(LIBDEPS): Use INTLDEPS.
(EXTRA_LIBS): Use INTLLIBS.
* aclocal.m4 (SIM_AC_COMMON): Call CY_GNU_GETTEXT.
(CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST,
AM_LC_MESSAGES): New macros from GNU gettext.
* gen.c (insns_bit_useless): Perform unsigned bit comparisons.
* filter.c (is_filtered_out, filter_parse): Pacify GCC, len is unsigned.
* gen-icache.c (print_icache_extraction): Do not type cast pointers.
o When unpacking an r5900 FP value,
was not treating IEEE-NaN's as very
large values.
o When packing an r5900 FP result from an infinite
precision intermediate value was saturating
to IEEE-MAX instead of r5900-MAX
o The least significant bit of the FP status
register did not stick to one.
* sim-memopt.c (parse_addr): Sunos 4.5 does not hane strtol
declared so we need this cast to prevent long long addresses
from being misconfigures. Results in access to unmapped memory.
[ChangeLog]
Mon Apr 13 16:51:00 1998 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (*): Added .vuout/.vuexpect/.vuok test targets
for confirming VU instruction trace.
(t-cop2): Test COP2 sim using above facility.
* t-cop2.vuexpect: New file.
[ChangeLog]
Mon Apr 13 16:28:52 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Add proper 1000000 bit-string at top
of VU lower instruction.
VCALLMS-related were found/fixed.
[ChangeLog.sky]
* sky-vu.c ({read,write}_vu_special_reg): Add CMSAR[01] as special
registers for a VU. Behavior not as mandated.
({read,write}_vu_{misc,special}_reg): Create sim_io_error upon
access to unknown register. Behavior not as mandated.
* sky-vu.h (anonymous register numbering enum): Add CMSAR[01].
* sky-libvpe.c (indebug): Cache $ENV{'SKY_DEBUG'}.
[ChangeLog]
* Makefile.in (SIM_SKY_OBJS): Added sky-vudis.o.
* interp.c (decode_coproc): Refer to VU CIA as a "special"
register, not as a "misc" register. Aha. Add activity
assertions after VCALLMS* instructions.
work!
[ChangeLog.sky]
* sky-vu.h (vu_device): Represent "macro instruction just stuffed
into fetch buffer" condition with new "m" bit. Rename old "m" to
"l".
* sky-libvpe.c (indebug): Save snapshot of environment value;
workaround for suspected memory corruption.
(fetch_inst): Respect new "m" macro-instruction flag for reporting
successful fetch to caller.
(exec_inst): Disassemble instruction here instead of fetch time.
Renamed old "m" -> "l" flag in VU state to track interlock
release.
(vpecallms_cycle): Call exec_inst only if fetch_inst did some
work.
* sky-vu.c (vu_attach, vu[01]_device): Revamped initialization to
ensure complete clear of tail part of struct at attach time.
(vu0_busy): Fix thinko.
(vu0_macro_issue): Adapt to new "l" flag.
(vu0_micro_interlock_released): Ditto.
(write_vu_special_reg): Ditto.
(read_vu_special_reg): Compute VBS0/VBS1 bits more explicitly.
The other VU status bits are not yet computed.
[ChangeLog]
* interp.c (decode_coproc): Do not apply superfluous E (end) flag
to upper code of generated VU instruction.
sce*_testN.* corresponds to the original testN/test.*
*.vuasm : MICRO code
*.dvpasm : DMAtag and VIF code description
*.out_gif.dat : GIF output values for the corresponding testcase.
sce_main.c : driver file for the SCE testcases
sce_macro.s : SCE provided macro file needed by the SCE (feb28) testcases
refresh.s : Needed by sce_main.c
Makefile.in : Updated to run make and run the SCE testsuite.
: ----------------------------------------------------------------------
masking facility for PATH3 transfers.
[ChangeLog.sky]
Sun Apr 5 12:11:45 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-libvpe.c (exec-inst): Added "M" bit detection for upper
instruction.
* sky-pke.c (pke_check_stall): Added more assertions.
(pke_code_mskpath3): Use new GPUIF M3P control register.
* sky-pke.h (VU[01]_CIA): New macros that give VU CIA
pseudo-register addresses.
* sky-vu.h (vu_device, VectorUnitState): Merged structs.
(VectorUnitState.mflag): New field.
(VU_REG_{CMSAR0,CMSAR1,FBRST}) Added missing control registers.
* sky-vu.c (vu0_busy): New function.
(vu0_q_busy): New function.
(vu0_macro_issue): New function.
(vu0_micro_interlock_released): New function.
(vu0_busy_in_{micro,macro}_mode): Deleted stubs.
(vu0_macro_hazard_check): Deleted stubs.
(vu_attach): Adapted code to merged device & state struct.
(read_vu_special_reg): Compute VBS0/VBS1 bits in STAT register.
[ChangeLog]
start-sanitize-sky
Sun Apr 5 12:05:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (*): Adapt code to merged VU device & state structs.
(decode_coproc): Execute COP2 each macroinstruction without
pipelining, by stepping VU to completion state. Adapted to
read_vu_*_reg style of register access.
* mips.igen ([SL]QC2): Removed these COP2 instructions.
* r5900.igen ([SL]QC2): Transplanted these COP2 instructions here.
* sim-main.h (cop_[ls]q): Enclosed in TARGET_SKY guards.
end-sanitize-sky
into single PKE-style vu.[ch].
[ChangeLog]
Fri Mar 27 16:19:29 1998 Frank Ch. Eigler <fche@cygnus.com>
start-sanitize-sky
* Makefile.in (SIM_SKY_OBJS): Replaced sky-vu[01].o with sky-vu.o.
* interp.c (sim_{load,store}_register): Use new vu[01]_device
static to access VU registers.
(decode_coproc): Added skeleton of sky COP2 (VU) instruction
decoding. Work in progress.
* mips.igen (LDCzz, SDCzz): Removed *5900 case for this
overlapping/redundant bit pattern.
(LQC2, SQC2): Added *5900 COP2 instruction skeleta. Work in
progress.
* sim-main.h (status_CU[012]): Added COP[n]-enabled flags for
status register.
end-sanitize-sky
* interp.c (cop_lq, cop_sq): New functions for future 128-bit
access to coprocessor registers.
* sim-main.h (COP_LQ, COP_SQ): New macro front-ends for above.
[ChangeLog.sky]
* sky-engine.c (engine_run): Adapted from vu[01] -> vu merge.
* sky-hardware.c (register_devices): Ditto
* sky-pke.c (pke_fifo_*): Made these functions private again, now
that the GPUIF code does not use them.
* sky-pke.h (pke_fifo_*): Removed newly private declarations.
* sky-vu.c (*): Major rework: merge of old sky-vu0.c and
sky-vu1.c. Management of two VU devices parallels two PKEs.
Work in progress.
* sky-vu.h (*): Other half of merge.
(vu_device): New struct, parallel to pke_device.
sky-gs.h: initial drop of GS control registers
Makefile.in: added sky-gs.o to sanitized list
sky-gpuif.c (gif_io_write_buffer): correct memset length error, renamed
trace file for gif
(hw_tree_find_*_property): Clean up error message when property is not found.
* dv-pal.c (hw_pal_io_read_buffer): Check the smp property is present before
looking for it.
hw_pal_timer, hw_pal_timer_value): Define.
(hw_pal_io_read_buffer, hw_pal_io_write_buffer): Add timer support
(do_counter_event, do_counter_read, do_counter_value,
do_counter_write): new functions.
* hw-tree.c (hw_printf): Send tree dump to stderr, same as other
trace output.
* hw-base.c (hw_create): Stop searching for a device when one is
found.
* (stamp-tvals sim-inline.c): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* Makefile.in (nltvals.def): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* configure: Regenerate with autoconf 2.12.1 to fix shell issues for
NT native builds.
Tidy up hw-properties error messages.
New device dv-glue.c (copied from ../ppc/hw_glue.)
Only attach a port after a devices initialization has finished.
* sky-pke.h (pke_fifo*): Exported these formerly private functions.
(pke_device): Added FIFO cache fields.
* sky-pke.c (pke_fifo_reset): New function for GPUIF client -
clear FIFO contents.
(pke_pcrel_fifo): Added caching facility to prevent O(n^2) cost for
searching for consecutive operand words.
* sky-libvpe.c (MEM, uMEM): New/changed macros that perform modulo
calculations to handle out-of-range VU memory addresses.
(*): Replaced many previous uses of MEM[] and state->uMEM[] with
calls to above macros.
* sky-vu.h (struct VectorUnitState): Added qw/dw size fields for
MEM/uMEM buffers, for overflow prevention. Renamed MEM/uMEM fields
to catch all their prior users.
* sky-vu0.c (vu0_attach): Manually align MEM0/MEM1 buffers to force
16-byte alignment. (zalloc is not enough.)
* sky-vu1.c (vu1_attach): Ditto.
(init_vu): Store buffer sizes from allocation into VectorUnitState.
* sky-gpuif.h (GifPath): Use a pke_fifo strucf instead of
temporary fixed-size array for flexible FIFO sizing.
* sky-gpuif.c (SKY_GPU2_REFRESH): This is now an integer value to be
used as a modulus for periodic refresh.
(refresh): New function to send GPU2 refresh code periodically.
(*): Use pke_fifo calls to en/dequeue GPUIF tags & operands.
* sky-pke.h (struct pke_device): Added fields to allow caching of
results from recent FIFO searches.
the stand-alone executable.
[in ChangeLog.sky:]
* sky-gpuif.c (call_gs): Call properly into GPU2 library if
configured --with-sim-gpu2. Use SKY_GPU2_REFRESH symbol as
placeholder for future GPU2-refresh policy.
[in ChangeLog:]
* Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added
configurable settings for stand-alone simulator.
start-sanitize-sky
* configure.in: Added --with-sim-gpu2 option to specify path of
sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and
links/compiles stand-alone simulator with this library.
* interp.c (MEM_SIZE): Increased default sky memory size to 16MB.
end-sanitize-sky
* configure.in: Added X11 search, just in case.
* configure: Regenerated.
will ignore this until next SCEI clarification.
* tsv308_1.trc: Fixed test case as per SCEI email.
* tsv316_1.trc: Ditto.
* tsv408_1.trc: Same.
* tsv416_1.trc: Again.
* t-pke3.trc: Added more padding to one VU test to widen timing race.
* Make-common.in (dv-sockser.o): Add rule for.
* aclocal.m4: Check for fcntl.h.
* config.h: Add HAVE_FCNTL_H.
* sim-break.c (remove_breakpoint): Fix thinko.
* sim-hload.c (sim_load): Provide default value of SIM_HANDLES_LMA.
Use SIM_HANDLES_LMA for lma_p arg to sim_load_file.
of PKE, some old test cases had to be modified. There are suspected bugs
in the SCEI test cases too, so "make check" does not run cleanly at present.
* tss*.trc: New files, generated by perl script from
SCEI "test0" bucket.
* tsv*.trc: New files, generated by perl script from SCEI "test0"
bucket. Note that tsv432_0 may obsolete t-pke1.
* Makefile.in (TESTS): Run new scripts.
(check): Bulldoze through failing test cases with "make -k" until
SCEI fixes some of them.
(.run.ok): Increased run-time limit since some test runs can take
several seconds.
effectively full. The code is believed to be functionally complete now.
Some code cleanup is included at no extra charge in this version.
Fri Mar 13 20:21:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-vu1.c: (dump_mem): Commented out function to satiate
warning-ful compilation.
* sky-pke.c: (pke_reset): New function, called explicitly at
initialization and at FBRST.
(pke_fifo_flush): New function to flush (skip over) existing
quadwords in FIFO.
(pke_fifo_fit): New function to add space for new quadword in
FIFO.
(pke_fifo_access): New function to absolute-index into FIFO.
(pke_fifo_old): New function to remove old quadwords from FIFO.
(pke_begin_interrupt_stall): New function to abstract
interrupt-caused stalls.
(pke_*): Access PKE FIFO only thorugh pke_fifo functions.
(pke_pcrel_*): Renamed pke_pc_* functions.
(pke_code_unpack): Numerous logic tweaks for latest UNPACK
behavior changes & clarifications from SCEI.
* sky-pke.h (struct pke_fifo): New explicit FIFO representation.
(struct pke_device): Use struct above.
(PKE_DEBUG): Removed macro as misnomer.
* sky-hardware.c: Moved *_cmd_install declarations out.
* sky-hardware.h: Moved *_cmd_install declarations in.
define macro STATE_PROG_SYMS.
* sim-trace.c (trace_one_insn): Add variables abfd, symsize,
symbol_count, and asymbols. Call bfd_get_symtab_upper_bound
and bfd_canonicalize_symtab, to get symbol table on first use
and preserve it via STATE_PROG_SYMS for future calls to
bfd_find_nearest_line.
for sim/testsuite/sky:
* t-pke4.run: Removed test, since it succeeds yet returns a
non-zero exit code.
* Makefile.in (RUNOPTS): Removed --memory-size flag, made
unnecessary by sim/mips/interp.c changes.
(TESTS): Removed t-pke4.ok target.
* t-pke3.trc: Classified tests with [---] indicators, to match
items up with entries documented in testplan.sgml. Added numerous
additional tests. They assert behavior that assumes certain
favorable answers to PKE question set #6 to SCEI.
* t-pke1.trc: Added some [---] indicators.
for sim/mips:
* sky-pke.c (pke_issue): Revamped interrupt & stall code. Assume
that ER1/ER0/PIS bits are only set if not masked by ERR bits.
Signal PIS only if unmasked.
(pke_code_error): Signal ER1 only if unmasked.
(pke_pc_fifo): Signal ER0 only if unmasked.
(pke_code_unpack): Round up num_operands for last operand's
partial-word. Factor out "R" bit handling for better coverage
analysis. Fill upper words of a quadword with zeroes for Vn_m
UNPACK with n < 4.
* sky-device.c (device_error): Made function accept varargs.
* sky-device.h (device_error): Changed declaration to match.
* interp.c (sim_open): Made 0x0000 area memory be an alias of
the K0/K1 segments. Sanitized code.
* Makefile.in (vr4320.igen) : Added.
* configure.in (mips64vr4320-*-*): Added.
* configure : Rebuilt.
* mips.igen : Correct the bfd-names in the mips-ISA model entries.
Add the vr4320 model entry and mark the vr4320 insn as necessary.
* sky-vu1.c (vu1_io_write_register_window): Make CIA (pc) write
effective by updating more registers.
* sky-libvpe.c: Updated to match earlier VU state-change code.
* sky-vpe.h: Removed unused globals from declarations.
PKE tests run identically on SPARC/Solaris and x86/Linux.
* sky-pke.c (pke_io_{read,write}_buffer): Endianness fixes aka
"E-fixes" in register and FIFO read/writes.
(pke_code_{pkemscalf,pkemscal}): E-fixes in VU CIA setting.
(pke_code_{mpg,unpack}): E-fixes in VU memory & tracking updates.
(pke_code_direct): E-fixes in GPUIF FIFO stuffing.
* sky-pke.h (PKE_MEM_WRITE): E-fixes in trace file writing.
* sky-vu0.c (vu0_attach): Allocate micro/data memory with zalloc
to guarantee sufficient (16-byte) alignment.
* sky-vu1.c (vu1_attach): Ditto.
(vu1_io_read_register_window): *PARTIAL* E-fixes in register accesses.
* sky-libvpe.c (gif_write): E-fixes in GPUIF FIFO stuffing.
* sky-gpuif.c (gif_io_{read,write}_buffer): E-fixes in
register and FIFO read/writes.
* sky-dma.c (do_dma_transfer_tag): E-fixes in tag reading.
mechanism is starting to subside.
* sky-pke.h (PKE_FLAG_INT_NOLOOP): Added device flag to indicate
presence of stalled & interrupted PKEcode.
* sky-pke.c (pke_issue): Added PKEcode interrupt bit handling.
(pke_flip_dbf): Changed double-buffering logic to match SCEI
clarification.
(pke_code_*): Added interrupt bit stalling clause.
(pke_code_pkems*): Added ITOP/ITOPS transmission code.
(pke_code_unpack): Added more careful logic for processing
overflows of VU data memory addresses.
(engine_resume_full): Keep accurate core profile data.
* cgen-utils.c (sim_disassemble_insn): Don't use
sim_core_read_aligned_N, it messes up profiling results.
* sky-pke.h (PKE_MEM_READ): Removed "read" entry from FIFO trace.
* sky-pke.c (pke_attach): Set trace file to line buffering iff
open.
(pke_io_read_buffer, pke_io_write_buffer): Handle erroneous
reads/writes by zero-padding.
(pke_io_write_buffer): Switch to more bit-field definition macros.
(pke_issue): Remove "stalled" entry from FIFO trace.
(pke_pc_advance): Correct logic for DMA-tag-skipping, PKEcode
classification.
(pke_code_mskpath3): Sketch of possible PATH3 masking method.
(pke_code_mpg): Keep order of lower/upper VU words as supplied.
(pke_code_unpack): Logic change for wl/cl/num unpacking. Weird.
little struct.
interp.c: Update. Also add floating point Max/Min functions.
mips.igen: Remove r5900 tag from any floating point instructions.
r5900.igen: Rewrite. Implement *all* floating point insns (except ld/st).
r5400.igen: Tag mdmx functions as being mdmx specific.
discarded function warning.
* igen.c (main): Clarify -Wnodiscard.
* ld-insn.c (parse_function_record): For functions, allow use of
instruction style function model records
were hammered in today's runs. Work is beginning in endian-proofing
the code.
* sky-pke.c (pke1_issue): Issue on correct PKE device.
(pke_io_write_buffer, pke_code_mpg, pke_code_unpack): Perform more
endian conversions.
(pke_code_mpg, pke_code_direct): Add operand alignment assertions.
(pke_code_mpg): Correct VU stall checks. Correct VU opcode
transfer ordering.
(pke_code_direct): Correct typos in DIRECT operand accessing.
(pke_code_unpack): Correct conditional sign-extension handling.
* sky-gpuif.c (gif_io_read_buffer, gif_io_write_buffer): Correct
assertion polarity.
(gif_read_tag): Disable faulty DMA-tag testing code.
the SCEI PKE simulator's output on its own test sample (tsv432.in).
* sky-pke.h (PKE_MEM_READ, PKE_MEM_WRITE, PKE_REG_MASK_SET): Add
trace file records.
* sky-pke.c: (pke_track_write): Removed function. Replaced with
in-line modifications to VU tracking tables.
(pke_attach): Attach VU tracking tables. Use line buffering on
trace files.
(pke_issue): Spit out additional trace records.
(pke_pc_operand_bits): Correct bitfield masking error.
(*): Replace sim_read/write with kludge PKE_MEM_READ/WRITE
throughout.
(pke_code_unpack): Correct numerous small bugs in operand decoding
etc.
A few PKE instructions even run correctly! Next missing function of
interest: FIFO pruning.
* sky-pke.c (pke_issue): Take extra SIM_DESC argument.
(pke_attach): Attach correct PKE0/PKE1 device. Open trace file if
VIF{0,1}_TRACE_FILE env. var. is defined.
(pke_io_write_buffer): Classify words in FIFO quadword. Use
kludgey sim_core routines to access DMA registers.
(pke_pc_advance): Add PKEcode classification. Correct DMA tag
skipping. Emit trace records.
(pke_pc_fifo): Add PKEcode operand classification.
(pke_check_stall): Perform stall checks against updated register
scheme.
(pke_code_unpack): Correct operand-count calculation.
(pke_code_stmask): Correct instruction skipping.
* sky-pke.h (PKE_MEM_WRITE, PKE_MEM_READ): New kludge macros.
(BIT_MASK_BTW): Corrected off-by-one error.
(enum wordclass): Classify words in a FIFO quadword.
* sky-dma.c (dma_io_read_buffer): Correct address checking assertions.
* sky-engine.c (engine_run): Pass along SIM_DESC to PKE
instruction issue code.
(SEMANTIC_FN): Rewrite declaration.
(DECODE): Update type of semantic_fast member.
({EX,SEM}_FN_NAME): Have only one version.
* cgen.sh: Support building cpu.c.
* sim-base.h (sim_state_base): Delete conditionals surrounding
member scache_size.
* handling of super duper packed UNPACK arguments
* skipping of in-progress instruction on break/stop
* interrupt generation to 5900
* PATH2/PATH3 status checking & masking
* ability to write to FIFO one word (instead of quadword) at a time
* cgen.sh (decode): Add s/@arch@/$arch/.
* genmloop.sh (@cpu@_engine_run): Delete `current_state'.
(engine_resume): Likewise. Make `engine' volatile. Save copy
of cpu pointer in volatile object. Initialize read switch if
-parallel.
update v850, tic80 and mips simulators.
IGEN - Prepend prefix to more generated symbols and macros
(idecode_issue, instruction_word).
IGEN - Add -Wnowith option to supress warnings about word size
inflicts in input files.
MIPS - Clean up Makefile.in, m16.igen, m16.dc (new), m16run.c (new) so
that a mips16 simulator built using IGEN can be compiled.
Use the bfd-processor name in the sim-engine switch.
Add nr_cpus argument to sim_engine_run.
tic80, v850, d30v, mips, common:
Update
mips: Fill in bfd-processor field of model records so that
they match ../bfd/archures.
(sim_size): Use UMEM_SEGMENTS rather than hardwired constant.
(sim_close): Reset prog_bfd to NULL after closing it. Also
reset prog_bfd_was_opened_p after closing prog_bfd.
(sim_load): Reset prog_bfd_was_opened_p after closing prog_bfd.
(sim_create_inferior): Get start address from abfd not prog_bfd.
(xfer_mem): Do bounds checking on addresses and return zero length
read/write on bad addresses, rather than aborting. Prepare to
be able to handle xfers that cross segment boundaries, but not
yet implemented. Only emit debug message when d10v_debug is
set as well as DEBUG being defined.
* arch-defs.h: Deleted.
* mloop.in: Renamed from mainloop.in.
* sem.c: Renamed from semantics.c.
* Makefile.in: Update.
* sem-ops.h: Deleted.
* mem-ops.h: Deleted.
start-sanitize-cygnus
Add cgen support for generating files.
end-sanitize-cygnus
(arch): Renamed from CPU.
* decode.c: Redone.
* decode.h: Redone.
* extract.c: Redone.
* model.c: Redone.
* sem-switch.c: Redone.
* sem.c: Renamed from semantics.c, and redone.
* m32r-sim.h (PROFILE_COUNT_FILLNOPS): Update.
(GETTWI,SETTWI,BRANCH_NEW_PC): Define.
* m32r.c (WANT_CPU,WANT_CPU_M32R): Define.
(m32r_{fetch,store}_register): New functions.
(model_mark_{get,set}_h_gr): Prefix with m32r_.
(m32r_model_mark_{busy,unbusy}_reg): Prefix with m32r_.
(h_cr_{get,set}): Prefix with m32r_.
(do_trap): Fetch state from current_cpu, not current_state.
Call sim_engine_halt instead of engine_halt.
* sim-if.c (alloc_cpu): New function.
(free_state): New function.
(sim_open): Call sim_state_alloc, and malloc space for selected cpu
type. Call sim_analyze_program.
(sim_create_inferior): Handle selected cpu type when setting PC.
start-sanitize-m32rx
(sim_resume): Handle m32rx.
end-sanitize-m32rx
(sim_stop_reason): Deleted.
(print_m32r_misc_cpu): Update.
start-sanitize-m32rx
(sim_{fetch,store}_register): Handle m32rx.
end-sanitize-m32rx
(sim_{read,write}): Deleted.
(sim_engine_illegal_insn): New function.
* sim-main.h: Don't include arch-defs.h,sim-core.h,sim-events.h.
Include arch.h,cpuall.h. Include cpu.h,decode.h if m32r.
start-sanitize-m32rx
Include cpux.h,decodex.h if m32rx.
end-sanitize-m32rx
(_sim_cpu): Include member appropriate cpu_data member for the cpu.
(M32R_MISC_PROFILE): Renamed from M32R_PROFILE.
(sim_state): Delete members core,events,halt_jmp_buf.
Change `cpu' member to be a pointer to the cpu's struct, rather than
record inside the state struct.
* tconfig.in (WITH_DEVICES): Define here.
(WITH_FAST,WITH_SEM_SWITCH_{FULL,FAST}): Define for the cpu.
* cgen.sh: New file.
* cgen-scache.h: Deleted.
* cgen-scache.c: Only compile contents if WITH_SCACHE.
(scache_init): Use runtime computed size of SCACHE.
(scache_flush): Likewise.
* cgen-mem.h (GETIMEMU[QHSD]I): Declare.
([GS]ETT{QI,UQI,HI,UHI,SI,USI,DI,UDI}): Declare.
* cgen-sim.h: Scache support moved here.
(PC): Redo definition.
(ARGBUF,SCACHE,PARALLEL_EXEC): Provide forward decls.
(DECODE): Add parallel execution support.
Only include semantic label members if using switch.
(SWITCH,CASE,BREAK,DEFAULT,ENDSWITCH): Portable computed goto support.
(CGEN_CPU): Delete members exec_state, halt_sigrc, halt_jmp_buf.
(IADDR,CIA,SEM_ARG,EX_FN_NAME,SEM_FN_NAME,RECORD_IADDR,SEM_ARGBUF,
SEM_NEXT_PC,SEM_BRANCH_VIA_{CACHE,ADDR},SEM_NEW_PC_ADDR): Moved here
from cgen-types.h.
(engine_{stop,run,resume,halt,signal}): Delete decls.
* cgen-types.h (CGEN_{XCAT3,CAT3}): Delete.
(argbuf,scache): Delete forward decls.
(STATE): Delete decl.
* cgen-utils.c: Don't include decode.h, mem-ops.h, sem-ops.h.
Include cgen-mem.h, cgen-ops.h.
(engine_halt,engine_signal): Delete.
({ex,exc,sem,semc}_illegal): Delete.
(sim_disassemble_insn): Result of extract fn is in bits.
* genmloop.sh: Rewrite.
For sim/mips, enable multi-sim support when mips64vr5400-elf is target.
For sim/igen, allow specification of a default machine (will need
more work later).
* simops.c (OP_4201): For "rac", sign extend 56 bit value before
it is shifted.
* d10v_sim.h (MAX32, MIN32, MASK32, MASK40): Re-define using
SIGNED64 macro.
(os_fstat): Likewise. Validate fd argument.
(cb_host_to_target_stat): Delete big_p arg. If HS arg is NULL,
just compute target stat struct length.
* syscall.c: #include "libiberty.h", <sys/types.h>, <sys/stat.h>.
(ENOSYS,ENAMETOOLONG): Provide definitions if missing.
(get_string): Return host errno values so they can be properly
translated later.
(cb_syscall): Likewise.
(cb_syscall, cases open,unlink): Use get_path instead of get_string.
(cb_syscall, case read): Use read_stdin for file descriptor 0.
(cb_syscall, case write): Use write_stderr for file descriptor 2.
(cb_syscall): Add cases for lseek, unlink, stat, fstat, time.
(get_path): New function.
for floating point operations. Eliminates all dependencies the
simulator had on the hosts FP implemantation.
Add sim_fpu_{inv,abs,neg} functions to sim_fpu.[hc]
isn't possible in sim-reason.c and just return the target SIGRC
instead.
For simulators that rely on sim-reason.c, replace SIG* with SIM_SIG*.
Hack nrun.c so that when it is executed (ARGV[0]) as `step' instead
of `run' it single steps the simulator. Allows testing of single step
without full GDB.
(ANDI): Was missing mipsIV model, fix assembler syntax.
(do_c_cond_fmt): New function.
(C.cond.fmt): Handle mips I-III which do not support CC field
separatly.
(bc1): Handle mips IV which do not have a delaed FCC separatly.
(SDR): Mask paddr when BigEndianMem, not the converse as specified
in IV3.2 spec.
(DMULT, DMULTU): Force use of hosts 64bit multiplication. Handle
vr5000 which saves LO in a GPR separatly.
* configure.in (enable-sim-igen): For vr5000, select vr5000
specific instructions.
* configure: Re-generate.
* sim-base.h (sim_state_base): Add member trace_data.
(STATE_TRACE_DATA): New macro.
* sim-trace.h (TRACE_DEBUG_IDX,TRACE_debug): New macros.
({WITH_,}TRACE_DEBUG_P): New macros.
(STATE_TRACE_FLAGS,STRACE_P,STRACE_DEBUG_P): New macros.
(_sim_cpu): Delete forward reference.
(debug_printf): Update.
* sim-trace.c (OPTION_TRACE_DEBUG): Define.
(trace_options): Add --trace-debug.
(set_trace_options): Handle it.
(trace_option_handler): Likewise.
(trace_install): Init state trace_data struct.
(trace_uninstall): Close state trace file.
* sim-events.c (ETRACE): Only print source file and number if
--trace-debug.
* sim-n-core.h (sim_core_trace_M): Likewise.
* sim-core.c (sim_core_signal): Add missing "\n" in message.
built this way.
(sim-config.o): Remove non-existent $(sim-nconfig_h) dependency.
(clean): Don't delete $(BUILT_SRC_FROM_COMMON) if building in
source tree.
MIPS simulator so that correctly writes the value of CIA back int PC
(the global previously used) when the simulation halts.
Fix implementation of DELAY_SLOT and NULLIFY_NEXT_INSTRUCTION macros.
calls) and sim_open so that they uses the virtual memory data transfer
functions sim_read & sim_write. This eliminates all code (other than
in load_memory & store_memory) that makes assumptions about the
implementation of the underlying memory model.
* sim-endian.c (sim_endian_split_16, sim_endian_join_16): New functions
* sim-endian.h (VL8_16, VH8_16): Implement.
* sim-memopt.c (memory_option_handler): Typecast 64bit value to long in printf.
(memory_option_handler): Only zalloc modulo bytes when non-zero.
(memory_option_handler): Skip comma in alias address list
that overlapping regions can be defined.
Allow the layer (level) of a memory region to be specified as part of
an address parameter to memory options.
Update simulators.
When address translation of insn fetch fails raise exception immediatly.
Use address_word as type of all address variables (instead of unsigned64),
the former is configured as either 32 or 64 bit type.
Always compile fpu code (no #if has fpu)
implementation. Add preliminary support for different IEEE-754
rounding modes. Implement SQRT in software.
Update TiC80 simulator.
Add sim-fpu -> TestFloat interface for testing.
* sim-base.h: Add point to breakpoint list to sim_state_base.
* sim-break.c sim-break.h: New modules that implement intrinsic
breakpoint support.
* sim-module.c: Add breakpoint module.
* gencode.c (SDBBP,DERET): Added (3900) insns.
(RFE): Turn on for 3900.
* interp.c (DebugBreakPoint,DEPC,Debug,Debug_*): Added.
(dsstate): Made global.
(SUBTARGET_R3900): Added.
(CANCELDELAYSLOT): New.
(SignalException): Ignore SystemCall rather than ignore and
terminate. Add DebugBreakPoint handling.
(decode_coproc): New insns RFE, DERET; and new registers Debug
and DEPC protected by SUBTARGET_R3900.
(sim_engine_run): Use CANCELDELAYSLOT rather than clearing
bits explicitly.
* Makefile.in,configure.in: Add mips subtarget option.
* configure: Update.
trace output.
* sim-core.c (sim_core_signal): When bad access halt simulator
SIGSEGV / SIGBUS instead of aborting.
(signal.h): Include.
* sim-watch.c (sim_watchpoint_install): Handler for watchpoint
options was missing.
o Clarify how to use alias options
o use in sim-watch (better usage message)
o Don't pass something on the stack into the
watch-point interrupt hander.
with sim/common.
* configure.in: check for sys/param.h
* compile.c: #ifdef HAVE_SYS_PARAM_H.
#define SIGTRAP for wingdb.
(sim_resume): poll keyboard at least once per call.
(sim_resume): use host_callback instead of printf for syscall
output.
Add file sim-hload.c - generic load for hardware only simulators.
Review each simulators sim_open, sim_load, sim_create_inferior so that
they more closely match required behavour.
that image properties such as endianness can be checked.
More strongly document the expected behavour of each of the sim_*
interfaces.
Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN. Use in sim_config.
(sim_stop_reason): If State.exited is nonzero, then indicate that
the simulator exited instead of stopped.
* mn10300_sim.h (struct _state): Add exited field.
* simops.c (syscall): Set State.exited for SYS_exit.
Fixes problem found bin Felix.
