st_dev, st_ino, st_mode, st_nlink, st_uid, st_gid, st_rdev,
st_size, st_blksize, st_blocks, st_atime, st_mtime and st_ctime.
* aclocal.m4 (SIM_CHECK_MEMBER, SIM_CHECK_MEMBERS_1)
(SIM_CHECK_MEMBERS): New macros.
* callback.c (cb_host_to_target_stat): Use temporary macro ST_x
for struct stat member test and write. Add ST_x calls for each
struct stat member tested in configure.in. Wrap each ST_x call in
#ifdef of configure macro for that member.
* configure, config.in: Regenerate.
add sub-dependencies for other sim files that they include.
(sim_main_headers): Use sim-*_h rules.
(sim-load.o): Depend on sim-basics_h, not sim_main_headers.
Committed by Andrew Cagney.
* traps-linux.c: Don't include linux/module.h.
(m32r_trap): Remove dummy systemcall's entry of __NR_ustat and
__NR_get_kernel_syms.
Committed by Andrew Cagney.
* configure.in: Check for sys/mount.h, sys/vfs.h, sys/statfs.h.
Check for struct statfs.
* emul_netbsd.c: If not HAVE_STRUCT_STATFS, #undef HAVE_FSTATFS.
* configure, config.in: Regenerate.
* bandor.s: New file.
* bandornot.s: New file.
* bclr.s: New file.
* bld.s: New file.
* bldnot.s: New file.
* bset.s: New file.
* bst.s: New file.
* bxor.s: New file.
* clip.s: New file.
* div.s: New file.
* fail.s: New file, make sure fail works.
* fsca.s: New file.
* fsrra.s: New file.
* mov.s: New file.
* mulr.s: New file.
* pass.s: New file, make sure pass works.
* pushpop.s: New file.
* resbank.s: New file.
* testutils.inc (bf8k, bt8k, assertmem): New macros.
* interp.c (RAISE_EXCEPTION_IF_IN_DELAY_SLOT): New macro.
(in_delay_slot): New flag variable.
(Delay_Slot): Set in_delay_slot.
(sim_resume): Reset in_delay_slot after leaving code switch.
* gencode.c (op tab): Call RAISE_EXCEPTION_IF_IN_DELAY_SLOT for all
instructions not allowed in delay slots.
Commited by Corinna Vinschen <vinschen@redhat.com>
Introduce SH2a support.
* interp.c: Change type of jump table to short. Add various macros.
(sim_load): Save the bfd machine code.
(sim_create_inferior): Ditto.
(union saved_state_type): Add tbr, ibnr and ibcr registers.
Move bfd_mach to end of struct. Add regstack pointer.
(init_dsp): Don't swap contents of sh_dsp_table any more. Instead
use it directly in its own switch statement. Allocate space for 512
register banks.
(do_long_move_insn): New function.
(do_blog_insn): Ditto.
(trap): Use trap #13 and trap #14 to set ibnr and ibcr.
* gencode.c: Move movx/movy insns into separate switch statement.
(op tab): Add sh2a insns. Reject instructions that are disabled
on that chip.
(gensim_caselist): Generate default case here instead of in caller.
(gensim): Generate two separate switch statements. Call
gensim_caselist once for each (for movsxy_tab and for tab).
Add tokens for r15 and multiple regs.
(conflict_warn, warn_conflicts): Add for debugging.
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'.
* rs6000-tdep.c: #include "sim-regno.h" and "gdb/sim-ppc.h".
(set_sim_regno, init_sim_regno_table, rs6000_register_sim_regno):
New functions.
(rs6000_gdbarch_init): Register rs6000_register_sim_regno. Call
init_sim_regno_table.
* Makefile.in (gdb_sim_ppc_h): New variable.
(rs6000-tdep.o): Update dependencies.
include/gdb/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
* sim-ppc.h: New file.
sim/ppc/ChangeLog:
2004-07-20 Jim Blandy <jimb@redhat.com>
Use a fixed register numbering when communicating with the PowerPC
simulator.
* sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
include GDB's "defs.h".
(gdb_register_name_table): New variable.
(gdb_register_name_table_size): New enum constant.
(gdb_register_name): New function.
(sim_fetch_register, sim_store_register): Use gdb_register_name,
instead of calling gdbarch_register_name.
* Makefile.in (GDB_SIM_PPC_H): New variable.
(DEFS_H): Delete variable.
(sim_calls.o): Update dependencies.
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install-man, installdirs): Add DESTDIR prefix.
Index: ppc/ChangeLog
2004-07-26 Andrew Cagney <cagney@gnu.org>
Problem from Olaf Hering <olh@suse.de>.
* Makefile.in (install, installdirs): Add DESTDIR.
2003-07-23 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Make sure that dst.reg refers to the
right register byte in mova/sz.l @(dd,RnL),ERn.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
mulxs, divs and divxs.
sim/testsuite/sim/h8300/ChangeLog:
2003-07-22 Michael Snyder <msnyder@redhat.com>
* mul.s: Don't try to use negative immediate (it's always
unsigned).
* div.s: Ditto.
* utils-fpu.inc (enable_fpu, ckm_fp_cc): New macros.
(clrset_fp_cc): Fix mask used for upper 7 condition codes.
* utils-mdmx.inc: Include utils-fpu.inc.
(enable_mdmx): Use enable_fpu.
* utils-fpu.inc: New file.
* utils-mdmx.inc: New file.
* mdmx-ob.s: New file.
* mdmx-ob-sb1.s: New file.
* basic.exp: Run new mdmx-ob and mdmx-ob-sb1 tests.
* sim/mips/basic.exp (run_hilo_test): New procedure.
(models): Only list models that are included in the configuration.
(submodels): New variable, set to submodels of the above.
(mips64vr-*-elf, mips64vrel-*-elf): New configuration stanza.
Run hilo-hazard-[123].s.
(MIPS_MACH_HAS_MULT_HILO_HAZARD, MIPS_MACH_HAS_DIV_HILO_HAZARD): New.
* mips.igen (check_mt_hilo, check_mult_hilo, check_div_hilo): Provide
separate implementations for mipsIV and mipsV. Use new macros to
determine whether the restrictions apply.
* frv.c (frvbf_iacc_cut): Rework, taking rounding into account.
testsuite/
* sim/frv/fr400/scutss.cgs: Fix tests to account for rounding.
Add some new ones.
* gencode.c (table): Change from char to short.
(dumptable): Change generated table from char to short.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): char to short.
(init_dsp): Compute size of sh_dsp_table.
(sim_resume): Change jump_table from char to short.
Committed by Andrew Cagney.
* mloopx.in: Update copyright.
(xextract-pbb): Fixed trap for system calls operation in parallel.
* mloop2.in (xextract-pbb): Ditto.
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips*-*-*): Configure in testsuite.
* configure: Regenerate.
[ sim/testsuite/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* sim/mips: New directory. Tests for the MIPS simulator.
[ sim/testsuite/sim/mips/ChangeLog ]
2004-01-26 Chris Demetriou <cgd@broadcom.com>
* basic.exp: New file.
* testutils.inc: New file.
* sanity.s: New file.
* mips.igen (check_mf_cycles, check_mt_hilo, check_mf_hilo)
(check_mult_hilo): Improve comments.
(check_div_hilo): Likewise. Also, fork off a new version
to handle mips32/mips64 (since there are no hazards to check
in MIPS32/MIPS64).
* gencode.c (expand_opcode): Simplify and reorganize.
Eliminate "shift" parameter. Eliminate "4 bits at a time"
assumption. Flatten switch statement to a single level.
Add "eeee" token for even-numbered registers.
(bton): Delete.
(fsca): Use "eeee" token.
(ppi_moves): Rename to "expand_ppi_movxy". Do the ddt
[movx/movy] expansion here, as well as the ppi expansion.
(gensim_caselist): Accept 'eeee' along with 'nnnn'.
(O_RDONLY): Do not define.
(O_WRONLY): Likewise.
(O_RDWR): Likewise.
(targ-vals.h): Include it.
(translate_open_mode): Use TARGET_O_* instead of O_*.
(SWIopen): Likewise.
* Makefile.in (armos.o): Depend on targ-vals.h.
(SPR_REGNUM_MAX): Delete.
* frv.c (gdb/sim-frv.h): Include.
(frvbf_fetch_register, frvbf_store_register): Use register number
constants from gdb/sim-frv.h. Check availability of general
purpose and float registers.
* frv-sim.h (REGNUM_LR): Removed.
(REGNUM_SPR_MIN,REGNUM_SPR_MAX): New macros.
* frv.c (frvbf_fetch_register): Fetch SPR registers based on
REGNUM_SPR_MIN and REGNUM_SPR_MAX. Check whether SPRs are implemented.
Return 0 for an unimplemented register. Return the length of the data
for an implemented register.
(frvbf_store_register): Ditto.
* h8300/compile.c : Addition of extern variable h8300_normal_mode
(SP) : Handle normal mode
(bitfrom) : Use normal mode flag to return suitable value
(lvalue) : Use normal mode flag to return command line location
(decode) : Decode instruction correctly for normal mode
(init_pointers) : Initialise memory correctly for normal mode
(sim_resume) : Handle cases for normal mode using h8300_normal_mode flag
(sim_store_register) : Handle 2 byte PC for normal mode
(sim_fetch_register) : Handle 2 byte PC for normal mode
(set_h8300h) : Set normal mode flag as per architechture
(sim_load) : Allocate 64K for normal mode instead of bigger memory
* callback.h (struct host_callback_struct): New members ftruncate
and truncate.
gdb:
sim/common:
* callback.c (os_ftruncate, os_truncate): New functions.
(default_callback): Initialize ftruncate and truncate members.
sim/sh:
* syscall.h (SYS_truncate, SYS_ftruncate): Define.
* interp.c (trap): Add support for SYS_ftruncate and SYS_truncate.
* sim/frv/testutils.inc (or_gr_immed): New macro.
* sim/frv/fp_exception-fr550.cgs: Write insns using
unaligned registers into the program in order to
cause the required exceptions.
* sim/frv/fp_exception.cgs: Ditto.
* sim/frv/regalign.cgs: Ditto.
* sim/frv/fr550: New subdirectory.
* sim/frv/fr400/*.cgs: Add fr550 as appropriate.
* sim/frv/fr500/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*.cgs: Add fr550 as appropriate.
* sim/frv/interrupts/*-fr550.cgs: New test cases for fr550.
* profile.h (update_FR_ptime): New prototype.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): Ditto.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(post_wait_for_SPR): Ditto.
* profile.c (update_FR_ptime): Moved here from profile-fr500.c.
(update_FRdouble_ptime): Ditto.
(update_SPR_ptime): New function.
(increase_ACC_busy): Ditto.
(enforce_full_acc_latency): Ditto.
(vliw_wait_for_fdiv_resource): Correct resource name.
(vliw_wait_for_fsqrt_resource): Ditto.
(post_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_commit): New function.
(frvbf_model_fr500_u_gr2fr): Pass out_FRk as output register to
adjust_float_register_busy.
(frvbf_model_fr500_u_gr_load): Record latency of SPR registers.
(frvbf_model_fr500_u_fr_load): Wait for and record latency of SPR
registers.
(frvbf_model_fr500_u_float_arith): Ditto.
(frvbf_model_fr500_u_float_dual_arith): Ditto.
(frvbf_model_fr500_u_float_div): Ditto.
(frvbf_model_fr500_u_float_sqrt): Ditto.
(frvbf_model_fr500_u_float_convert): Ditto.
(update_FR_ptime): Moved to profile.c
(update_FRdouble_ptime): Moved to profile.c
* profile-fr400.c (update_FR_ptime): Removed. Identical to functions
for other machines.
(update_FRdouble_ptime): Ditto.
* arch.h,cpu.h,sem.c,decode.[ch],model.c,sem.c: Regenerated.
* registers.c (frv_check_spr_read_access): Check for access to
ACC4-ACC63 and ACCG4-ACCG63.
* profile.h (frv-desc.h): #include it.
(spr_busy): New member of FRV_PROFILE_STATE.
(spr_latency): Ditto.
(GNER_FOR_GR): New macro.
(FNER_FOR_FR): New maccro.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile.c (profile-fr550.h): #include it.
(update_latencies): Update SPR latencies.
(update_target_latencies): Ditto.
(update_SPR_latency): New function.
(vliw_wait_for_SPR): New function.
* profile-fr500.c (frvbf_model_fr500_u_idiv): Record GNER latency.
(frvbf_model_fr500_u_trap): Removed unused variable, ps.
(frvbf_model_fr500_u_check): Ditto.
(frvbf_model_fr500_u_clrgr): New unit modeller for fr500.
(frvbf_model_fr500_u_clrfr): Ditto.
(frvbf_model_fr500_u_spr2gr): Wait for SPR.
(frvbf_model_fr500_u_gr2spr): Ditto.
* frv-sim.h (H_SPR_ACC4): New macro.
(H_SPR_ACCG4): New macro;
(H_SPR_ACC0): Removed.
(H_SPR_ACCG0): Removed.
* arch.h,model.c,sem[ch],decode.[ch]: Regenerated.
* profile.c (slot_names): FM1 was listed twice. Changed first
instance to FM0. Added IALL, FMALL and FMLOW.
(print_parallel): Don't examine slots with no insns.
On behalf of Doug Evans <dje@sebabeach.org>
* Makefile.in (stamp-arch,stamp-cpu): Pass archfile to cgen.
Remove copying of .cpu file to cgen/cpu, no longer needed.
On behalf of Doug Evans <dje@sebabeach.org>
* cgen.sh: New arg archfile.
* Make-common.in (cgen-arch,cgen-cpu,cgen-defs,cgen-decode,
cgen-cpu-decode,cgen-desc): Update call to cgen.sh.
* sim/frv/interrupts/Ipipe-fr400.cgs: New file.
* sim/frv/interrupts/Ipipe-fr500.cgs: New file.
* sim/frv/interrupts/Ipipe.cgs: Remove (replaced by above).
Dave Brolley <brolley@redhat.com>
* frv/: New directory, simulator for the Fujitsu FR-V.
* testsuite/frv-elf/: New directory.
* testsuite/sim/frv/: New directory.
* configure.in: Add frv configury.
* configure: Regenerate.
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-glue.c (hw_glue_finish): Change %d to %ld to match sizeof.
* sim-options.c (print_help): Cast the format with specifier to
"int".
Index: mn10300/ChangeLog
2003-08-28 Andrew Cagney <cagney@redhat.com>
* dv-mn103ser.c (do_polling_event): Change type of "serial_reg" to
"long".
(read_status_reg): Cast "serial_reg" to "long".
* dv-mn103tim.c (do_counter_event): Change type of "timer_nr" to
"long".
(do_counter6_event, write_mode_reg, write_tm6md): Ditto.
* sim/sh/gencode.c ( tab[] ): Addition of MAC.L handler and
correction for MAC.W handler
* sim/sh/interp.c ( macl ): New Function. Implementation of
MAC.L handler.
* MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
maintenance. List igen and sh maintainers. Mention that target
and global maintainers pick up the slack.
the physical address in virtual address.
(struct _sim_cpu): Add memory bank members.
* m68hc11_sim.c (cpu_initialize): Clear memory bank parameters.
* interp.c (sim_hw_configure): Create memory bank according to memory
bank parameters.
(sim_get_bank_parameters): New function to obtain memory bank config
from the symbol table.
(sim_prepare_for_program): Call it to obtain the memory bank parameters.
(sim_open): Call sim_prepare_for_program.
* dv-m68hc11.c (m68hc11cpu_io_write_buffer): Use memory bank parameters
to check if address is within bank window.
(m68hc11cpu_io_read_buffer): Likewise.
(attach_m68hc11_regs): Map the memory bank according to memory bank
parameters.
* cmpw.s: Add test for less-than-zero immediate.
* shll.s: Test for shll reg, reg.
* shlr.s: Test for shlr reg, reg.
* mova.s: Add dozens of new mova tests.
* compile.c (decode): Enhancements for mova.
Initialize cst, reg, and rdisp inside the loop, for each
new instruction. Defer correction of the disp2 values until
later, and then adjust them by the size of the first operand,
rather than the size of the instruction.
(sim_resume): For mova, adjust the size of the second operand
according to the type of the first operand (INDEXB vs. INDEXW).
In cases where there is only one operand, the other two must
both be composed on the fly.
* gencode.c (pshl): Change < to <= (shift by 16 is allowed).
Cast argument of >> to unsigned to prevent sign extension.
(psha): Change < to <= (shift by 32 is allowed).
* gencode.c: A few more fix-ups of refs and defs.
(frchg): Raise SIGILL if in double-precision mode.
(ldtlb): We don't simulate cache, so this is a no-op.
(movsxy_tab): Correct a few bit pattern errors.
* gencode.c (ppi_gensim): For a conditional ppi insn, if the
condition is false, we want to return (not break). A break
will take us to the end of the function where registers will
be updated, whereas the desired outcome is for nothing to change.
* gencode.c (op tab): Some fix-ups of refs and defs.
(ocbi, ocbp): Cache not simulated, but may cause memory fault.
(gensym_caselist): Add default case to switch statement.
(expand_ppi_code): Add default case to switch statement.
Written by matthew green <mrg@redhat.com>, with fixes from Aldy
Hernandez <aldyh@redhat.com>, Jim Wilson <wilson@redhat.com>, and
Nick Clifton <nickc@redhat.com>.
* ppc-instructions: Include altivec.igen and e500.igen.
(model_busy, model_data): Add vr_busy and vscr_busy.
(model_trace_release): Trace vr_busy and vscr_busy.
(model_new_cycle): Update vr_busy and vscr_busy.
(model_make_busy): Update vr_busy and vscr_busy.
* registers.c (register_description): Add Altivec and e500
registers.
* psim.c (psim_read_register, psim_read_register): Handle Altivec
and e500 registers.
* ppc-spr-table (SPEFSCR): Add VRSAVE and SPEFSCR registers.
* configure.in (sim_filter): When *altivec* add "av". When *spe*
or *simd* add e500.
(sim_float): When *altivec* define WITH_ALTIVEC. When *spe* add
WITH_E500.
* configure: Re-generate.
* e500.igen, altivec.igen: New files.
* e500_expression.h, altivec_expression.h: New files.
* idecode_expression.h: Update copyright. Include
"e500_expression.h" and "altivec_expression.h".
* e500_registers.h, altivec_registers.h: New files.
* registers.h: Update copyright. Include "e500_registers.h" and
"altivec_registers.h".
(registers): Add Altivec and e500 specific registers.
* Makefile.in (IDECODE_H): Add "idecode_e500.h" and
"idecode_altivec.h".
(REGISTERS_H): Add "e500_registers.h" and "altivec_registers.h".
(tmp-igen): Add dependencies on altivec.igen and e500.igen .
From matthew green <mrg@redhat.com>:
* sim-fpu.h: Update copyright.
(sim_fpu_fraction, sim_fpu_guard): New prototypes.
* sim-fpu.c: Update copyright.
(sim_fpu_fraction, sim_fpu_guard): New inline functions.
* cgen-trace.h (sim_disasm_read_memory): Update args to be compatible
with disassemble_info:read_memory_func.
* cgen-trace.c (sim_disasm_read_memory): Ditto.
* compile.c: Replace "Hitachi" with "Renesas".
(decode): Distinguish AV_H8S from AV_H8H.
(sim_resume): H8SX can use any register for TAS.
(decode): Add support for VECIND.
(sim_resume): Implement rte/l and rts/l.
(GETSR): New macro (actually old macro reincarnated).
(decode): Add handling for IMM2.
(sim_resume): Drop extra block around jmp, jsr, rts.
Add handling for trapa and rte.
For divxu.b, change 0xffff mask to 0xff.
(set_h8300h): Add bfd_mach_h8300sxn machine.
* compile.c (sim_info): Fix typo in output.
* h8300/compile.c (set_h8300h): Replace 'flag' arguments
with a bfd_machine argument, and decode it inline.
Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (cmdline_location): Added function to
return the location of 8-bit (256 locations) where the
Command Line arguments would be stored.
(decode): Added a TRAP to 0xcc for Commandline
processing using pseudo opcode O_SYS_CMDLINE.
(sim_resume): Added handling of O_SYS_CMDLINE Trap.
(sim_create_inferior): Setting a pointer to
Commandline Args array.
* inst.h: Added a new variable ptr_command_line for
storing pointer to Commandline array.
2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
* compile.c (decode): Added code for some more magic traps.
* compile.c (sim_resume): Added support for File I/O system
calls through callback to host_system.
System calls provided support for :
open, read, write, lseek, close, stat, fstat
Only basic support for stat and fstat.
* gen-engine.c (print_engine_issue_prefix_hook): Don't add the
global prefix to ENGINE_ISSUE_PREFIX_HOOK.
(print_engine_issue_postfix_hook): Likewise ENGINE_ISSUE_POSTFIX_HOOK.
This patch fixes the gcc.dg/nest.c failures for sh-elf.
Fri Oct 11 16:22:28 2002 J"orn Rennecke <joern.rennecke@superh.com>
* interp.c (trap): Return int. Take extra parameter for address
of the trap instruction. Changed all callers.
Add case 33 for profiling.
* gencode.c (trapa): Handle trap 33 using the trap function.
Add read of vector for generic traps.
bank window to some virtual address to read from extended memory.
(m68hc11cpu_io_write_buffer): Likewise for writing.
(attach_m68hc11_regs): When use_bank property is defined, attached
to the 68HC12 16K memory bank window.
* interp.c (sim_hw_configure): Create memory region for banked
memory.
* sim-main.h (M6812_CALL_INDIRECT): Add to enum.
(m6811_regs): Add page register.
(cpu_set_page, cpu_get_page): New macros.
(phys_to_virt): New function.
(cpu_get_indexed_operand_addr, cpu_return): Declare.
* gencode.c: Identify indirect addressing mode for call and fix daa.
(gen_function_entry): New param to tell if src8/dst8 locals are
necessary.
(gen_interpreter): Use it to avoid generation of unused variables.
* interp.c (sim_fetch_register): Allow to read page register; page
register, A, B and CCR are only 1 byte wide.
(sim_store_register): Likewise for writing.
* mips.igen (do_load_double, do_store_double): New functions.
(LDC1, SDC1): Rename to...
(LDC1b, SDC1b): respectively.
(LDC1a, SDC1a): New instructions for MIPS II and MIPS32 support.
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp,
renumbering the sh-dsp registers to use distinct numbers.
sim/sh:
* Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
gdb:
* sh-tdep.c (sh_dsp_register_sim_regno): New function.
(sh_gdbarch_init): Use it for sh-dsp.
* mdmx.c (SD_): Delete.
(Unpredictable): Re-define, for now, to directly invoke
unpredictable_action().
(mdmx_acc_op): Fix error in .ob immediate handling.
Ed Satterthwaite <ehs@broadcom.com>
* mips3d.igen: New file which contains MIPS-3D ASE instructions.
* Makefile.in (IGEN_INCLUDE): Add mips3d.igen.
* mips.igen: Include mips3d.igen.
(mips3d): New model name for MIPS-3D ASE instructions.
(CVT.W.fmt): Don't use this instruction for word (source) format
instructions.
* cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32)
(fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32)
(fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions.
(NR_FRAC_GUARD, IMPLICIT_1): New macros.
* sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2)
(RSquareRoot1, RSquareRoot2): New macros.
(fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1)
(fp_rsqrt2): New functions.
* configure.in: Add MIPS-3D support to mipsisa64 simulator.
* configure: Regenerate.
* cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros.
(value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac)
(fp_inv_sqrt, fpu_format_name): Add paired-single support.
(convert): Note that this function is not used for paired-single
format conversions.
(ps_lower, ps_upper, pack_ps, convert_ps): New functions.
* mips.igen (FMT, MOVtf.fmt): Add paired-single support.
(check_fmt_p): Enable paired-single support.
(ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS)
(PUU.PS): New instructions.
(CVT.S.fmt): Don't use this instruction for paired-single format
destinations.
* sim-main.h (FP_formats): New value 'fmt_ps.'
(ps_lower, ps_upper, pack_ps, convert_ps): New prototypes.
(PSLower, PSUpper, PackPS, ConvertPS): New macros.
* mips.igen (MOVN, MOVZ): Trace result.
(TNEI): Print "tnei" as the opcode name in traces.
(CEIL.W): Add disassembly string for traces.
(RSQRT.fmt): Make location of disassembly string consistent
with other instructions.
Ed Satterthwaite <ehs@broadcom.com>
* cp1.c: Fix more comment spelling and formatting.
(value_fcr, store_fcr): Use fenr_FS rather than hard-coding value.
(denorm_mode): New function.
(fpu_unary, fpu_binary): Round results after operation, collect
status from rounding operations, and update the FCSR.
(convert): Collect status from integer conversions and rounding
operations, and update the FCSR. Adjust NaN values that result
from conversions. Convert to use sim_io_eprintf rather than
fprintf, and remove some debugging code.
* cp1.h (fenr_FS): New define.
(z8k_inv_list): Delete global.
(DIRTY_HACK): Delete macro.
(makelist): Delete global.
(main): Delete code making a list. Delete dirty hack code. Use
lookup_inst instead of z8k_inv_list.
* list.c: Delete file.
* Makefile.in (writecode): Do not link in list.o.
(list.o): Delete target.
* sim-main.h (FGRIDX): Remove, replace all uses with...
(FGR_BASE): New macro.
(FP0_REGNUM, FCRCS_REGNUM, FCRIR_REGNUM): New macros.
(_sim_cpu): Move 'fgr' member to be right before 'fpr_state' member.
(NR_FGR, FGR): Likewise.
* interp.c: Replace all uses of FGRIDX with FGR_BASE.
* mips.igen: Likewise.
* sim-main.h (Nan, Infinity, Less, Equal, AbsoluteValue, Negate)
(Add, Sub, Multiply, Divide, Recip, SquareRoot): Move lower in
file, remove PARAMS from prototypes.
(value_fpr, store_fpr, convert): Likewise. Use SIM_STATE to provide
simulator state arguments.
(ValueFPR, StoreFPR, Convert): Move lower in file. Use SIM_ARGS to
pass simulator state arguments.
* cp1.c (SD): Redefine as CPU_STATE(cpu).
(store_fpr, convert): Remove 'sd' argument.
(value_fpr): Likewise. Convert to use 'SD' instead.
Ed Satterthwaite <ehs@broadcom.com>
* configure.in (mipsisa64sb1*-*-*): New target for supporting
Broadcom SiByte SB-1 processor configurations.
* configure: Regenerate.
* sb1.igen: New file.
* mips.igen: Include sb1.igen.
(sb1): New model.
* Makefile.in (IGEN_INCLUDE): Add sb1.igen.
* mdmx.igen: Add "sb1" model to all appropriate functions and
instructions.
* mdmx.c (AbsDiffOB, AvgOB, AccAbsDiffOB): New functions.
(ob_func, ob_acc): Reference the above.
(qh_acc): Adjust to keep the same size as ob_acc.
* sim-main.h (status_SBX, MX_VECT_ABSD, MX_VECT_AVG, MX_AbsDiff)
(MX_Avg, MX_VECT_ABSDA, MX_AbsDiffC): New macros.
* interp.c (sim_create_inferior): Add comment.
From Alan Matsuoka <alanm@redhat.com>:
From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
* simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
(OP_4401): Output "mvf0t" instead of "mf0t".
(OP_460B): Do not output a flag register.
(OP_4609): Do not output a flag register.
* sim-d10v.h: New file. Moved from include/sim-d10v.h.
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* d10v-tdep.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* Makefile.in (sim_d10v_h): Update definition.
include:
* dis-asm.h (print_insn_shl, print_insn_sh64l): Remove prototype.
gdb:
* sh-tdep.c (gdb_print_insn_sh64): Delete.
(gdb_print_insn_sh): Just set info->endian and use print_insn_sh.
(sh_gdbarch_init): Always use gdb_print_insn_sh.
opcodes:
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
* sh-dis.c (LITTLE_BIT): Delete.
(print_insn_sh, print_insn_shl): Deleted.
(print_insn_shx): Renamed to
(print_insn_sh). No longer static. Handle SHmedia instructions.
Use info->endian to determine endianness.
* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
(print_insn_sh64x): No longer static. Renamed to
(print_insn_sh64). Removed pfun_compact and endian arguments.
If we got an uneven address to indicate SHmedia, adjust it.
Return -2 for SHcompact instructions.
sim/sh64:
* sim-if.c (sh64_disassemble_insn): Use print_insn_sh instead of
print_insn_shl.
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* callback.c: Use 'deprecated' rather than 'depreciated.'
[ igen/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* igen.c: Use 'deprecated' rather than 'depreciated.'
[ mips/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* interp.c: Use 'deprecated' rather than 'depreciated.'
* sim-main.h: Likewise.
* cp1.c (store_fpr): Remove #ifdef'd out call to UndefinedResult
which wouldn't compile anyway.
* sim-main.h (unpredictable_action): New function prototype.
(Unpredictable): Define to call igen function unpredictable().
(NotWordValue): New macro to call igen function not_word_value().
(UndefinedResult): Remove.
* interp.c (undefined_result): Remove.
(unpredictable_action): New function.
* mips.igen (not_word_value, unpredictable): New functions.
(ADD, ADDI, do_addiu, do_addu, BGEZAL, BGEZALL, BLTZAL, BLTZALL)
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, do_mult, do_multu)
(do_sra, do_srav, do_srl, do_srlv, SUB, do_subu): Invoke
NotWordValue() to check for unpredictable inputs, then
Unpredictable() to handle them.
* ppc-instructions (lswx): Do the register control with the
register count. Initialize the right register in the loop.
(mtfsfi) : Correct prefix for the instruction.
* cp1.c (fpu_format_name): New function to replace...
(DOFMT): This. Delete, and update all callers.
(fpu_rounding_mode_name): New function to replace...
(RMMODE): This. Delete, and update all callers.
* interp.c: Move FPU support routines from here to...
* cp1.c: Here. New file.
* Makefile.in (SIM_OBJS): Add cp1.o to object list.
(cp1.o): New target.
* configure.in (mipsisa32*-*-*, mipsisa64*-*-*): New targets.
* mips.igen (mips32, mips64): New models, add to all instructions
and functions as appropriate.
(loadstore_ea, check_u64): New variant for model mips64.
(check_fmt_p): New variant for models mipsV and mips64, remove
mipsV model marking fro other variant.
(SLL) Rename to...
(SLLa) this.
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, SLLb): New instructions
for mips32 and mips64.
(DCLO, DCLZ): New instructions for mips64.
* mips.igen (BREAK, LUI, ORI, SYSCALL, XORI): Print
immediate or code as a hex value with the "%#lx" format.
(ANDI): Likewise, and fix printed instruction name.
cpu struct.
(sim_hw_configure): Connect the capture input/output events.
* sim-main.h (_sim_cpu): New member hw_cpu.
(m68hc11cpu_set_oscillator): Declare.
(m68hc11cpu_clear_oscillator): Declare.
(m68hc11cpu_set_port): Declare.
* dv-m68hc11.c (m68hc11_options): New for oscillator commands.
(m68hc11cpu_ports): New input ports and output ports to reflect
the HC11 IOs.
(m68hc11_delete): Cleanup any running oscillator.
(attach_m68hc11_regs): Create the input oscillators.
(make_oscillator): New function.
(find_oscillator): New function.
(oscillator_handler): New function.
(reset_oscillators): New function.
(m68hc11cpu_port_event): Handle the new input ports.
(m68hc11cpu_set_oscillator): New function.
(m68hc11cpu_clear_oscillator): New function.
(get_frequency): New function.
(m68hc11_option_handler): New function.
(m68hc11cpu_set_port): New function.
(m68hc11cpu_io_write): Post the port output events.
* dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
the output port value.
* dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
by latching the TCNT value in the register.
vector address according to cpu mode.
(interrupts_initialize): Move reset portion to the above.
(interrupt_names): New table to give a name to interrupts.
(idefs): Handle pulse accumulator interrupts.
(interrupts_info): Print the interrupt history.
(interrupt_option_handler): New function.
(interrupt_options): New table of options.
(interrupts_update_pending): Keep track of when interrupts are
raised and implement breakpoint-on-raise-interrupt.
(interrupts_process): Keep track of when interrupts are taken
and implement breakpoint-on-interrupt.
* interrupts.h (struct interrupt_history): Define.
(struct interrupt): Keep track of the interrupt history.
(interrupts_reset): Declare.
(interrupts_initialize): Update prototype.
* m68hc11_sim.c (cpu_reset): Reset interrupts.
(cpu_initialize): Cleanup.
* sim-main.h (status_UX, status_SX, status_KX, status_TS)
(status_PX, status_MX, status_CU0, status_CU1, status_CU2)
(status_CU3): New definitions.
* sim-main.h (ExceptionCause): Add new values for MIPS32
and MIPS64: MDMX, MCheck, CacheErr. Update comments
for DebugBreakPoint and NMIReset to note their status in
MIPS32 and MIPS64.
(SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck)
(SignalExceptionCacheErr): New exception macros.
* mips.igen (check_fpu): Enable check for coprocessor 1 usability.
* sim-main.h (COP_Usable): Define, but for now coprocessor 1
is always enabled.
(SignalExceptionCoProcessorUnusable): Take as argument the
unusable coprocessor number.
* mips.igen (check_fmt, check_fmt_p): New functions to check
whether specific floating point formats are usable.
(ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt)
(FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt)
(ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W):
Use the new functions.
(do_c_cond_fmt): Remove format checks...
(C.cond.fmta, C.cond.fmtb): And move them into all callers.
* mips.igen (loadstore_ea): New function to do effective
address calculations.
(do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store,
do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1,
CACHE): Use loadstore_ea to do effective address computations.
* mips.igen (PREFX): Tweak instruction opcode fields (i.e.,
add a comma) so that it more closely match the MIPS ISA
documentation opcode partitioning.
(PREF): Put useful names on opcode fields, and include
instruction-printing string.
* mips.igen (check_u64): New function which in the future will
check whether 64-bit instructions are usable and signal an
exception if not. Currently a no-op.
(DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL,
DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB,
DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1,
LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64.
* mips.igen (check_fpu): New function which in the future will
check whether FPU instructions are usable and signal an exception
if not. Currently a no-op.
(ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb,
CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt,
CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1,
LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf,
MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt,
NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt,
ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1,
SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu.
* mips.igen (do_load_left, do_load_right): Move to be immediately
following do_load.
(do_store_left, do_store_right): Move to be immediately following
do_store.
* mips.igen: Add some additional comments about supported
models, and about which instructions go where.
(BC1b, MFC0, MTC0, RFE): Sort supported models in the same
order as is used in the rest of the file.
* mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment
indicating that ALU32_END or ALU64_END are there to check
for overflow.
(DADD): Likewise, but also remove previous comment about
overflow checking.
* mips.igen (ADDI): Print immediate value.
(BREAK): Print code.
(DADDIU, DSRAV, DSRLV): Print correct instruction name.
(SLL): Print "nop" specially, and don't run the code
that does the shift for the "nop" case.
* igen.c (main): Change -I to add include paths for :include:
files.
Implement -G as per sim/igen, with just gen-icache=N support.
Call load_insn_table() with the built include path.
* ld-insn.c (parse_include_entry): New. Load an :include: file.
(load_insn_table): New `includes' argument. Look for :include:
entries and call parse_include_entry() for them.
(main): Adjust load_insn_table() call.
* ld-insn.h (model_include_fields): New enum.
(load_insn_table): Update prototype.
* table.c (struct _open_table, struct _table): Rework
structures to handle included files.
(table_push): Move the guts of table_open() here.
* table.c (struct _open table, struct table): Make table object an
indirect ptr to the current table file.
(current_line, new_table_entry, next_line): Make file arg type
open_table.
(table_open): Use table_push.
(table_entry_read): Point variable file at current table, at eof, pop
last open table.
* misc.h (NZALLOC): New macro. From sim/igen.
* table.h, table.c (table_push): New function.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
* sim-events.c (sim_events_remain_time): New function returning
the time that remains before the event is raised.
* hw-events.c (hw_event_remain_time): Likewise.
* sim-events.h (sim_events_remain_time): Declare.
* hw-events.h (hw_event_remain_time): Declare.
* sim-hw.c: Use <errno.h> instead of <sys/errno.h>
(OPTION_HW_LIST): New option --hw-list to list the devices.
(hw_option_handler): List the device tree with 'sim_hw_print'.
* sim-bits.h (_MSB_16, _LSB_16): Define for 16-bit targets.
(MASK, LSBIT, MSBIT): Likewise and use _MSB_16 and _LSB_16.
(EXTENDED): Define for 16-bit word size.
* sim-bits.c (LSEXTRACTED, MSEXTRACTED, LSINSERTED,
MSINSERTED, LSSEXT, MSSEXT): Implement for 16-bit word size.
* sim-types.h: Added support for 16-bit targets.
(ARM_Strong_Prop, STRONGARM): Define.
* arminit.c (ARMul_NewState): Reset is_StrongARM.
(ARMul_SelectProcessor): Set is_StrongARM.
* wrapper.c (sim_create_inferior): Use bfd machine type to
determine processor type to emulate.
* armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
when emulating StrongARM.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
* armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
extracted from state->Cpsr, but preserve the unused bits.
(ARMul_GetCPSR): Get bits preserved in state->Cpsr.
(ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
get the full CPSR word.
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
2000-06-20 Frank Ch. Eigler <fche@redhat.com>
* compile.c: Don't include "wait.h".
(sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
instead of WIF* from host.
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
genericXor, genericBtst): Use `unsigned32'.
* op_utils.c: Likewise.
* mn10300.igen, am33.igen: Use `unsigned32', `signed32',
`unsigned64' or `signed64' where type width is relevant.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
2000-03-11 Philip Blundell <philb@gnu.org>
* armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
Patch from Allan Skillman <Allan.Skillman@arm.com>.
* cgen-fpu.h: Rename extsfdf to fextsfdf. Rename truncdfsf to
ftruncdfsf.
* cgen-accfp.c (fextsfdf): New function.
(ftruncdfsf): New function.
(cgen_init_accurate_fpu): Initialize fextsfdf and ftruncdfsf.
2000-03-08 Dave Brolley <brolley@redhat.com>
* cgen-par.h (cgen_write_queue_kind): Add CGEN_FN_SF_WRITE.
(CGEN_WRITE_QUEUE_ELEMENT): Add fn_sf_write.
(sim_queue_fn_si_write): Last argument is has type USI.
(sim_queue_fn_sf_write): New function.
* cgen-par.c (sim_queue_fn_si_write): Declare 'value' as USI.
(sim_queue_fn_sf_write): New function.
(cgen_write_queue_element_execute): Handle CGEN_FN_SF_WRITE.
* merge from internal repo -> sourceware
2000-03-02 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated.
Tue Feb 8 18:35:01 2000 Donald Lindsay <dlindsay@hound.cygnus.com>
* interp.c, mips.igen: all 5 DEADC0DE situations now have sim_io_eprintf
calls, conditional on the simulator being in verbose mode.
instead of sim_trace() to run the program; include support for ``-o''
option (operating environment); when a signal occurs, only continue
execution when operating environment mode.
Update d10v.
* sparc-desc.h: New file.
* sparc-opc.h: New file.
* decode64.c: New file.
* decode64.h: New file.
* sem64.c: New file.
* cpu64.c: New file.
* cpu64.h: New file.
* model64.h: New file.
* mloop64.in: New file.
* regs64.h: New file.
* trap64.c: New file.
* cpu32.h,decode32.c,decode32.h,model32.c,sem32.c: Rebuild.
1999-02-05 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_tickle): After a polled I/O from the
CPU, start periodic background I/O polls.
(tx3904sio_poll): New function: periodic I/O poller.
(PROFILE_USEFUL_MASK): New macro.
* sim-profile.c (profile_options): Make like trace_options, allow
optional on|off arg where applicable.
(set_profile_option_mask): New function.
(sim_profile_set_option): New function.
(profile_option_handler): Simplify.
Have -p only enable selected things, not everything.
Add missing break to OPTION_PROFILE_PC_RANGE.
* cgen-scache.c (scache_options): Allow optional on|off arg to
--profile-scache.
(scache_option_handler): Use sim_profile_set_option.
for internal PR 18869 and 18870.
1999-01-26 Frank Ch. Eigler <fche@cygnus.com>
* sim-memopt.c (memory_options): Add MEMORY_FILL option.
(memory_option_handler): Implement MEMORY_FILL option. Make
MEMORY_CLEAR an alias for MEMORY_FILL=0.
(parse_ulong_value): New function.
(do_memopt_add): Allocate all buffers. Optionally fill them.
(CGEN_MAIN_SCM): Add rtx-funcs.scm.
(cgen-arch): Pass $(mach) to cgen.sh.
* cgen-engine.h (SEM_BRANCH_FINI): New arg pcvar, all uses updated.
(SEM_BRANCH_INIT_EXTRACT): New macro.
(SEM_BRANCH_INIT): Add taken_p.
(TARGET_SEM_BRANCH_FINI): Provide default definition.
(SEM_BRANCH_FINI): Use it.
(SEM_INSN): Update.
* cgen-run.c (sim_resume): Handle tracing of last insn.
* cgen-scache.h (WITH_SCACHE): Define as 0 if not defined.
* cgen-trace.c (current_abuf): New static global.
(trace_insn_init): Initialize it.
(trace_insn_fini): Use it.
(trace_insn): Set it.
* cgen.sh (arch case): Pass -m ${mach} to cgen.
* genmloop.sh (@cpu@_emit_before): Only define if WITH_SCACHE_PBB.
(@cpu@_emit_after): Ditto.
(simple @cpu@_engine_run_full): New local `pc'. Initialize semantic
labels if WITH_SEM_SWITCH_FULL.
* sim-model.c: Include bfd.h.
(sim_model_init): New function.
(sim_model_install): Record init fn.
* sim-model.h (MACH): New member bfd_name.
* sim-module.c (modules): Initialize model before scache.
[ChangeLog]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (BREAK): Call signal_exception instead of sim_engine_halt.
start-sanitize-sky
* interp.c (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook.
Call sim_engine_halt on BreakPoint.
end-sanitize-sky
[ChangeLog.sky]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* sky-gdb.c (sky_sim_engine_halt): Do not set CIA here.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (sim_open): Allocate jm3904 memory in smaller chunks.
(load_word): Call SIM_CORE_SIGNAL hook on error.
(signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before
starting. For exception dispatching, pass PC instead of NULL_CIA.
(decode_coproc): Use COP0_BADVADDR to store faulting address.
* sim-main.h (COP0_BADVADDR): Define.
(SIM_CORE_SIGNAL): Define hook to call mips_core_signal.
(SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* mips.igen (*): Replace memory-related SignalException* calls
with references to SIM_CORE_SIGNAL hook.
* dv-tx3904irc.c (tx3904irc_port_event): printf format warning
fix.
* sim-main.c (*): Minor warning cleanups.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
* interp.c (sim_open): Add stub mn103002 cache control memory regions.
Set OPERATING_ENVIRONMENT on "stdeval1" board.
(mn10300_core_signal): New function to intercept memory errors.
(program_interrupt): New function to dispatch to exception vector
(mn10300_exception_*): New functions to snapshot pre/post exception
state.
* sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
(SIM_ENGINE_HALT_HOOK): Do nothing.
(SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
Various endianness and warning fixes.
* mn10300.igen (illegal): Call program_interrupt on error.
(break): Call program_interrupt on breakpoint
Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
merged in:
* dv-mn103int.c (mn103int_ioctl): New function for NMI
generation. (mn103int_finish): Install it as ioctl handler.
* dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
1998-12-24 Frank Ch. Eigler <fche@cygnus.com>
* dv-sockser.c (DEFAULT_TIMEOUT): Increase to 1 ms.
* nrun.c (main): Remain in simulation loop for traps and
exceptions when in operating environment mode.
(ui_loop_hook): New stub hook for standalone use.
* sim-events.c (sim_events_process): Call ui_loop_hook
periodically on CYGWIN host.
* sim-reason.c (sim_stop_reason): Return host signal numbers
to gdb on sim_stopped and sim_signalled cases.
* sim-engine.c (sim_engine_halt): Call SIM_CPU_EXCEPTION_SUSPEND
hook just before longjmp.
* sim-resume.c (sim_resume): Call SIM_CPU_EXCEPTION_RESUME
hook just before sim_engine_run.
* sim-n-core.h (sim_core_trace_M): Allay const warning.
* sim-trace.h (trace_generic): Ditto.
* sim-trace.c (trace_generic): Ditto.
* sim/fr30/ldres.cgs: New testcase.
* sim/fr30/stres.cgs: New testcase.
* sim/fr30/copop.cgs: New testcase.
* sim/fr30/copld.cgs: New testcase.
* sim/fr30/copst.cgs: New testcase.
* sim/fr30/copsv.cgs: New testcase.
* sim/fr30/nop.cgs: New testcase.
* sim/fr30/andccr.cgs: New testcase.
* sim/fr30/orccr.cgs: New testcase.
* sim/fr30/addsp.cgs: New testcase.
* sim/fr30/stilm.cgs: New testcase.
* sim/fr30/extsb.cgs: New testcase.
* sim/fr30/extub.cgs: New testcase.
* sim/fr30/extsh.cgs: New testcase.
* sim/fr30/extuh.cgs: New testcase.
* sim/fr30/enter.cgs: New testcase.
* sim/fr30/leave.cgs: New testcase.
* sim/fr30/xchb.cgs: New testcase.
* sim/fr30/dmovb.cgs: New testcase.
* sim/fr30/dmov.cgs: New testcase.
* sim/fr30/dmovh.cgs: New testcase.
* sim/fr30/testutils.inc (take_branch{_d},no_branch{_d}): New macros.
* sim/fr30/ret.cgs: Add tests fir ret:d.
* sim/fr30/inte.cgs: New testcase.
* sim/fr30/reti.cgs: New testcase.
* sim/fr30/bra.cgs: New testcase.
* sim/fr30/bno.cgs: New testcase.
* sim/fr30/beq.cgs: New testcase.
* sim/fr30/bne.cgs: New testcase.
* sim/fr30/bc.cgs: New testcase.
* sim/fr30/bnc.cgs: New testcase.
* sim/fr30/bn.cgs: New testcase.
* sim/fr30/bp.cgs: New testcase.
* sim/fr30/bv.cgs: New testcase.
* sim/fr30/bnv.cgs: New testcase.
* sim/fr30/blt.cgs: New testcase.
* sim/fr30/bge.cgs: New testcase.
* sim/fr30/ble.cgs: New testcase.
* sim/fr30/bgt.cgs: New testcase.
* sim/fr30/bls.cgs: New testcase.
* sim/fr30/bhi.cgs: New testcase.
* sim/fr30/call.cgs: Test ret here as well.
* sim/fr30/ld.cgs: Remove bogus comment.
* sim/fr30/testutils.inc (save_rp,restore_rp): New macros.
* sim/fr30/div.ms: New testcase.
* sim/fr30/st.cgs: New testcase.
* sim/fr30/sth.cgs: New testcase.
* sim/fr30/stb.cgs: New testcase.
* sim/fr30/mov.cgs: New testcase.
* sim/fr30/jmp.cgs: New testcase.
* sim/fr30/ret.cgs: New testcase.
* sim/fr30/int.cgs: New testcase.
Set mips_fpu, and mips_fpu_bitsize.
Set sim_gen, and sim_igen_machine.
* configure: Rebuild.
* mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts.
* sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR.
* sim/fr30/div0s.cgs: New testcase.
* sim/fr30/div0u.cgs: New testcase.
* sim/fr30/div1.cgs: New testcase.
* sim/fr30/div2.cgs: New testcase.
* sim/fr30/div3.cgs: New testcase.
* sim/fr30/div4s.cgs: New testcase.
* sim/fr30/testutils.inc (mvi_h_dr,set_dbits,test_dbits): New Macros.
1998-12-10 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes.
(tx3904sio_tickle): fflush after a stdout character output.
* sim/fr30/testutils.inc (set_s_user): Correct Mask.
(set_s_system): Correct Mask.
* sim/fr30/ld.cgs (ld): Move previously failing test back
into place.
* sim/fr30/ldm0.cgs: New testcase.
* sim/fr30/ldm1.cgs: New testcase.
* sim/fr30/stm0.cgs: New testcase.
* sim/fr30/stm1.cgs: New testcase.
* configure: Regenerate.
* sim-main.h: Protect against multiple inclusion.
Don't include cgen-scache.h,cgen-cpu.h,cgen-trace.h,cpuall.h.
Done by cgen-sim.h now.
* tconfig.in (SIM_HAVE_MODEL): Delete, moved to cgen-types.h.
* cpuall.h: Regenerate.
* cpu.h,decode.c,sem-switch.c,sem.c: Regenerate.
* mloop.in (extract16): Make static inline again.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(extract32): Ditto.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(execute): Test ARGBUF_PROFILE_P before profiling.
Update calls to TRACE_INSN_INIT,TRACE_INSN_FINI.
* cpux.h,decodex.c,modelx.c,semx-switch.c: Regenerate.
* mloopx.in: Rewrite.
* cgen-sim.h: Simple header that includes others.
* sim-arange.c: New file.
* sim-arange.h: New file.
* sim-basics.h: Include it.
* Make-common.in (SIM_NEW_COMMON_OBJS): Add sim-arange.o.
(sim-arange.o): Add rule for.
* sim-cpu.h (sim_cpu_msg_prefix): Add prototype.
(sim_io_eprintf_cpu): Add prototype.
* sim-inline.h (HAVE_INLINE): Define if GNUC.
(INLINE2): New macro.
(EXTERN_INLINE): New macro.
* sim-module.c (sim_post_argv_init): Initialize cpu backlink
before calling module init fns.
* sim-profile.h (OPTION_PROFILE_*): Move into enum.
(profile_init): New function.
(profile_options): New option --profile-range.
(profile_option_handler): Handle --profile-range.
(profile_print_insn): Qualify address range specific section titles.
(profile_print_addr_ranges): New function.
(profile_info): Print address ranges if specified.
(profile_install): Set profile_init init fn.
* sim-profile.h (PROFILE_DATA): New member `range'.
* sim-trace.c (trace_init): New function.
(trace_options): New option --trace-range.
(trace_option_handler): Handle --trace-range.
(trace_install): Set trace_init init fn.
* sim-trace.h (TRACE_DATA): New member `range'.
* sim-utils.c (sim_cpu_msg_prefix): New function.
(sim_io_eprintf_cpu): New function.
* cgen-engine.h (PC_IN_TRACE_RANGE_P): New macro.
(PC_IN_PROFILE_RANGE_P): New macro.
* cgen-trace.c (trace_insn_init): Set current_insn to NULL.
(trace_insn_fini): New arg abuf. All callers updated.
Exit early if trace_insn not called. Check ARGBUF_PROFILE_P before
printing cycle counts.
* cgen-trace.h (trace_insn_fini): Update prototype.
(TRACE_RESULT_P): New macro.
(TRACE_INSN_INIT,TRACE_INSN_FINI): New arg abuf. All callers updated.
(TRACE_INSN): Check ARGBUF_TRACE_P.
(TRACE_EXTRACT,TRACE_RESULT): New arg abuf. All callers updated.
* cgen-types.h (SIM_INLINE): Delete.
(SIM_HAVE_MODEL,SIM_HAVE_ADDR_RANGE): Define.
* cgen-utils.c: Don't include cgen-engine.h
* genmloop.sh (@cpu@_fill_argbuf): New function.
(@cpu@_fill_argbuf_tp): New function.
(@cpu@_emit_before,@cpu@_emit_after): New functions.
(@cpu@_pbb_begin): Prefix cti_sc,insn_count with '_'.
(SET_CTI_VPC,SET_INSN_COUNT): Update.
(@cpu@_pbb_before): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_INIT,TRACE_INSN_FINI.
(@cpu@_pbb_after): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_FINI.
* sim/fr30/ld.cgs: Implement more loads.
* sim/fr30/call.cgs: New testcase.
* sim/fr30/testutils.inc (testr_h_dr): New macro.
(set_s_user,set_s_system): New macros.
[common/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* sim-gx-run.c (sim_engine_run): Use new tgx_info struct to
collect run-time arguments to gx block.
* sim-gx.h (sim_gx_function): Corresponding signature change.
* sim-gx.c (sim_gx_compiled_block_f): Remove nonfunctional code to
again compile a gx block source file.
(sim_gx_compiled_block_dispose): Uninstall obsoleted gx block
shared libraries.
(sim_gx_block_translate): Always emit new "gx_label_NNNN" labels,
for basic block entry points, even if !__GNUC__.
[m32r-gx/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* Makefile.in (SIM_OBJS): Don't build sim-core.o.
* configure.in: Added --enable-sim-inline support.
Look for "getenv()" function.
* configure: Rebuilt.
* config.in: Rebuilt.
* gx-translate.c: Include "sim-inline.c" for sim-core inlining.
(m32r_gx_{load,store}*): Update signature.
(tgx_emit_pre_function): Emit new "tgx_info" struct, update
callback function signatures.
(m32r_emit_*_insn): Use new callback signatures. For all short
branches in optimized mode, emit direct "goto gx_label_NNNN".
(tgx_optimize_test): If the GX_OPTIMIZE environment variable is
set, allow its integer value to override the optimization heuristic.
* m32r-sim.h: New empty placeholder file.
* sim-main.c: New empty placeholder file.
* sim-if.c (sim_create_inferior): Use NULL instead of &abort
for unimplemented register fondling functions.
* sim-main.h: Add multiple inclusion guard. Update callback
function signatures.
(tgx_info): New struct for collecting gx block invocation
arguments.
v850/simops.c, d10v/simops.c, v850/Makefile.in, d10v/Makefile.in:
Include targ-vals.h instead of syscall.h. Replace SYS_* with
TARGET_SYS_*. Add dependency.
z8k/support.c: Include <errno.h>
v850/simops.c: Replace long with portable signed32.
mips/interp.c: Make sim_monitor global - needed by sky.
(CGEN_ARCH_SCM): New variable.
* cgen-engine.h (EXTRACT_[ML]SB0_{INT,UINT}): New macros.
(EXTRACT_INT,EXTRACT_UINT): New macros.
(SEM_SEM_ARG): New macro.
(SEM_NEXT_VPC): New arg `pc'.
* cgen-sim.h (EXTRACT_SIGNED,EXTRACT_UNSIGNED): Delete.
(sim_disassemble_insn): Update prototype.
* cgen-trace.c (current_insn,insn_fields): New static locals.
(trace_insn): Set them.
* cgen-utils.scm: #include cgen-engine.h.
(sim_disassemble_insn): New arg insn_fields.
Handle variable length insns.
* genmloop.sh: Only emit pbb decls if -pbb.
(${cpu}_scache_lookup): New arg `vpc'.
(scache support): Fetch pc before entering loop.
[d30v/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0.
[testsuite/d30v-elf/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* do-shifts.S: Add test for large mvfacc shifts.
HAVE_PARALLEL_INSNS, define as 0 or 1. Emit decls of fns in mloop.cin.
* cgen-engine.h: Typedefs of IADDR,CIA,SEM_ARG,SEM_PC moved ...
* cgen-sim.h: ... to here.
Thu Oct 29 12:07:06 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-psrlvw.s (test_psrlvw): Add test for sign-extension in insn.
* t-padsbh.s: New test.
* t-mult1.s: New test.
* Makefile.in: Run them.
routine as the number of bytes to process. This apparently is due to
text-mode vs binary-mode. If the mounts are done text-mode, then the
size returnedby fstat() may be different than the number of bytes
"read" in text mode.
(sim-core.o): Delete duplicate dependence on $(SIM_EXTRA_DEPS).
(sim-cpu.o,sim-endian.o,sim-hw.o): Ditto.
(cgen-run.o,cgen-scache.o,cgen-trace.o,cgen-utils.o): Delete
explicit cgen header dependencies, require SIM_EXTRA_DEPS to include
CGEN_INCLUDE_DEPS.
* cgen-cpu.h: New file.
* cgen-engine.h: New file.
* cgen-scache.h: New file.
* cgen-sim.h: Delete portions moved to new files.
* genmloop.sh: Generate two files eng.hin,mloop.cin explicitly,
rather than sending result to stdout.
(cgen-run.o): New rule.
* cgen-ops.h: Delete many BI macros. Change all UBI -> BI.
* cgen-run.c (prime_cpu): New function.
* cgen-scache.c: Add pseudo-basic-block (pbb) scaching support.
(scache_option_handler, case OPTION_PROFILE_SCACHE): Handle explicitly
mentioned cpu.
(scache_flush_cpu,scache_lookup,scache_lookup_or_alloc): New fns.
* cgen-sim.h (CGEN_INSN_VIRTUAL_TYPE): New enum.
(CGEN_INSN_VIRTUAL_P): New macro.
(SEM_PC): New typedef.
(SEMANTIC_FN): Change type of result to SEM_PC.
(SEM_SET_FULL_CODE,SEM_SET_FAST_CODE,SEM_SET_CODE): New macros.
(IDESC_CTI_P,IDESC_SKIP_P): New macros.
(SCACHE_MAP): New typedef.
(CPU_SCACHE): Add pbb support.
(scace_lookup,scache_lookup_or_alloc,scache_flush_cpu): Declare.
(SEM_BRANCH_INIT_EXTRACT,SEM_BRANCH_INIT,SEM_BRANCH_FINI): New macros.
(CGEN_CPU): New members running_p,insn_count,{fast,full}_engine_fn,
max_slice_insns.
(INSN_NAME): Delete.
(cgen_insn_name): Declare.
(sim_engine_invalid_insn): Renamed from sim_engine_illegal_insn.
* cgen-trace.c (trace_buf): Shrink from 1024 to 256 bytes.
(first_insn_p): Make static.
(trace_insn): Handle virtual insns specially.
(cgen_trace_printf): Ensure we haven't overflowed the buffer.
* cgen-types.h (UBI): Delete.
(MODE_TYPE): New enum.
(HOSTINT,HOSTUINT,HOSTPTR): Delete.
* cgen-utils.c (mode_names): Delete UBI. Add INT,UINT,PTR.
(cgen_virtual_opcode_table): New global.
(cgen_insn_name): New function.
(sim_disassemble_insn): Ignore virtual insns.
* genmloop.sh: Delete top level loop generation. Add pbb support.
* sim-cpu.h (CPU_INSN_NAME_FN): New typedef.
(sim_cpu_base): New members max_insns,insn_name,model_data.
(CPU_PC_GET,CPU_PC_SET): New macros.
(sim_pc_get,sim_pc_set): Declare.
* sim-model.c (model_set): Call model init fn.
* sim-model.h (MODEL_FN): New typedef.
(INSN_TIMING): New member model_fn.
(MODEL): New members num,init.
* sim-profile.c (sim_profile_print_bar): Renamed from print_bar.
All callers updated.
(profile_insn_init): New fn.
(profile_print_insn): Update, INSN_NAME -> CPU_INSN_NAME.
Exit early if insn profiling not supported.
(profile_print_memory): Update, MAX_MODES -> MODE_TARGET_MAX.
(profile_install): Record profile_insn_init as init fn.
(profile_uninstall): Free PROFILE_INSN_COUNT if non-null.
* sim-profile.h: Update, MAX_MODES -> MODE_TARGET_MAX.
(PROFILE_DATA): Delete member exec_time.
Change insn_count to pointer to array, rather than the array.
(sim_profile_print_bar): Declare.
Fri Sep 4 10:37:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (mtsab): Correct typo in input register.
* sim-main.h (TMP_*): New macros for accessing local 128-bit
temporary for multimedia instructions.
* r5900.igen (*): Convert most instructions to use new TMP
macros to store output result during computation.
* interp.c: use NUM_CORE_REGS
* sky-gdb.c (set_fifo_breakpoints): use VIF interrupt bit for break
* sky-pke.c (pke_issue): use interrupt bit for break points
Hack sanitize so that it doesn't sanitize vrXXX when either of
keep-vr5400 or keep-vr4320 are specified.
Move two basic vr4100 instructions from mips.igen to vr.igen.
* op_utils.c (do_syscall): Rewrite to use common/syscall.c.
(syscall_read_mem, syscall_write_mem): New functions for syscall
callbacks.
* mn10300_sim.h: Add prototypes for syscall_read_mem and
syscall_write_mem.
* mn10300.igen: Change C++ style comments to C style comments.
Check for divide by zero in div and divu ops.
Do not sign extend immediate for mov imm,XRn.
More random mul, mac & div fixes.
Remove some unused variables.
Sign extend 24bit displacement in memory addresses.
Whee, more fixes.
Minor fixes in multiply/divide patterns.
start-sanitize-am33
* am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
fixes to 2 register multiply, divide and mac instructions. Set
Z,N correctly for sat16. Sign extend 24 bit immediate for add,
and sub instructions.
* am33.igen: Add remaining non-DSP instructions.
end-sanitize-am33
(CPU_SCACHE_HASH_MASK): New macro.
(SCACHE_HASH_PC): Rewrite.
* genmloop.sh (engine_resume_{full,fast}): Move some of hash
computation out of main loop.
* dv-mn103tim.c: Include sim-assert.h
* dv-mn103ser.c (do_polling_event): Check for incoming data on
serial line and schedule next polling event.
(read_status_reg): schedule events to check for incoming data on
serial line and issue interrupt if necessary.
* sky-pke.c(read_pke_pcx): return index of current pc
* sky-pke.h: export read_pke_pcx
* interp.c(sim_fetch_registers): read pke pc/pcx
* sky-libvpe.c: track name change from GDB
* sim-main.h: add vif memory based pc
- extend gdb comm area for fifo breakpoints
- define SIM_ENGINE_RESTART_HOOK
* sky-gdb.c: add support for VIF breakpoints
Tue Jun 16 09:03:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-cop2.s: Reorder instruction blocks to prevent "Out of bounds"
messages during test execution. Added dummy branch labels for BC2*
instructions.
* t-cop2.brn: Use --sky-debug option instead of env var.
* t-cop2.vuexpect: Updated for with new disassembly format.
* sky_sce_fast.exp: Don't compare GIF outputs for
--float-type=fast.
* sce_test{17,33,49}.dvpasm: Use ".DmaPackVif 1" option to
exercise assembler / PKE.
* rw-vureg.c: Cast memcpy operand to allay warning.
any open file handles before exiting
* sky-gpuif.[c|h]: add disassembly on the fly code, log and log
file option support
* sky-gdb.[c|h] (sky_command_options_close()): new function, added
some body to the log and log file option sections
which is now a list of options controlling the behaviour of sim_run.
* sim/sky/sky-defs.tcl (run_trc_test): Update to new way of
environment variables to sim_run.
* dv-mn103int.c (external_group): Use enumerated types to access
correct group addresses.
* dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
triggers an interrupt on the higher-numbered timer's port.
Wed Jun 10 15:56:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim/sky/t-int.c: New file to test sky hardware
interrupts.
* sim/sky/t-int-handler.s: New file for null interrupt
handler.
* sim/sky/t-int.brn: New file to build new test.
Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
It is not yet properly tested.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
byte-swapping unnecessary. Add -sparclite-board option for
emulating RAM found on typical SPARClite boards. Print
error message for unrecognized option.
* erc32.c: Change RAM address and size from constants to variables,
to allow emulation of SPARClite board RAM.
(fetch_bytes, store_bytes): New helper functions for revamped
mememory_read and memory_write.
(memory_read, memory_write): Rewrite to store bytes in target
byte order instead of storing words in host byte order; this
greatly simplifies support of little-endian programs.
(get_mem_ptr): Remove unnecessary byte parameter.
(sis_memory_write, sis_memory_read): Store words in target
byte order instead of host byte order.
(byte_swap_words): Remove, no longer needed.
* sis.h ((byte_swap_words): Remove declaration, no longer needed.
(memory_read): Add new sz parameter.
* sis.c (run_sim): Use revamped memory_read, which makes
byte-swapping unnecessary.
* exec.c (dispatch_instruction): Use revamped memory_read, which
makes byte-swapping and double-word fetching unnecessary.
* func.c (sparclite_board): Declare new variable.
(get_regi): Handle little-endian data.
(bfd_load): Recognize little-endian SPARClite as having
little-endian data.
* armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
of ":tt" to catch stdin in addition to stdout.
(ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
or success of lseek().
From PR 15839, modified a bit by me to appease my sense of style--but
not too much because I am lazy.
Mon Jun 1 18:54:22 1998 Frank Ch. Eigler <fche@cygnus.com>
* lib/sim-defs.exp (sim_run): Add possible environment variable
list to simulator run.
start-sanitize-sky
* sim/sky/sky-defs.tcl: Use it.
* sim/sky/t-pke2.vif1out: Update to match recent word-precise
tracking table change in sim/mips/sky-pke.c.
* sim/sky/t-pke3.trc: Ditto.
* sim/sky/t-pke4.vif0expect: Ditto.
end-sanitize-sky
Mon May 18 10:37:47 1998 Doug Evans <devans@canuck.cygnus.com>
