This makes symtab::filename const and removes a newly unnecessary
cast.
2013-12-06 Tom Tromey <tromey@redhat.com>
* symfile.c (allocate_symtab): Remove cast.
* symtab.h (struct symtab) <filename>: Now const.
This patch is purely mechanical. It removes gdb_stat.h and changes
the code to use sys/stat.h.
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_stat.h: Remove.
* ada-lang.c: Use sys/stat.h, not gdb_stat.h.
* common/filestuff.c: Use sys/stat.h, not gdb_stat.h.
* common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h.
* corefile.c: Use sys/stat.h, not gdb_stat.h.
* ctf.c: Use sys/stat.h, not gdb_stat.h.
* darwin-nat.c: Use sys/stat.h, not gdb_stat.h.
* dbxread.c: Use sys/stat.h, not gdb_stat.h.
* dwarf2read.c: Use sys/stat.h, not gdb_stat.h.
* exec.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h.
* gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h.
* inf-child.c: Use sys/stat.h, not gdb_stat.h.
* jit.c: Use sys/stat.h, not gdb_stat.h.
* linux-nat.c: Use sys/stat.h, not gdb_stat.h.
* m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h.
* main.c: Use sys/stat.h, not gdb_stat.h.
* mdebugread.c: Use sys/stat.h, not gdb_stat.h.
* mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h.
* nto-tdep.c: Use sys/stat.h, not gdb_stat.h.
* objfiles.c: Use sys/stat.h, not gdb_stat.h.
* procfs.c: Use sys/stat.h, not gdb_stat.h.
* remote-fileio.c: Use sys/stat.h, not gdb_stat.h.
* remote-mips.c: Use sys/stat.h, not gdb_stat.h.
* remote.c: Use sys/stat.h, not gdb_stat.h.
* rs6000-nat.c: Use sys/stat.h, not gdb_stat.h.
* sol-thread.c: Use sys/stat.h, not gdb_stat.h.
* solib-spu.c: Use sys/stat.h, not gdb_stat.h.
* source.c: Use sys/stat.h, not gdb_stat.h.
* symfile.c: Use sys/stat.h, not gdb_stat.h.
* symmisc.c: Use sys/stat.h, not gdb_stat.h.
* symtab.c: Use sys/stat.h, not gdb_stat.h.
* top.c: Use sys/stat.h, not gdb_stat.h.
* xcoffread.c: Use sys/stat.h, not gdb_stat.h.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
This patch aims at fixing the following problem, where the user:
. debugs its program
. makes a modification and rebuilds it *without exiting the debugger*
. returns to its debugging session and restarts the inferior
In that situation, the debugger notices that the underlying executable
has changed and that re-reading its symbols is needed. Shortly after
displaying a message informing the user of the situation, GDB crashes:
(gdb) run
[...]
`/[...]/dest' has changed; re-reading symbols.
zsh: 13434922 segmentation fault (core dumped)
The crash occurs while trying to allocate some memory on the bfd_bfd
obstack. But, at some point in time, the whole obstack data gets
corrupted, nullified. So the memory allocation fails trying to call
a function at a NULL address. (side note: when debugging GDB in GDB,
top-gdb reports a SIGILL, while the shell makes it look like it was
a SIGSEGV - the discrepancy is not critical to the investigation
and therefore was not explored)
The corruption occurred because the region where the per_bfd data
got free'ed nearly after it got allocated! This is what happens,
in chronological order (see reread_symbols):
1. GDB notices that the executable has changed, decides to
re-read its symbols.
2. Opens a new bfd, unrefs the old one
3. Calls set_objfile_per_bfd (objfile);
4. Re-initializes the objfile's obstack:
obstack_init (&objfile->objfile_obstack);
I think that the normal behavior for set_objfile_per_bfd would
be to search for already-allocated shared per_bfd data, and
allocate new one if not found. The critical difference between
a platform such as x86_64-linuxe where it works, and ppc-aix,
where it doesn't lies in the fact that bfd-data sharing is not
activated on ppc-aix, and as a result, the per-bfd data gets
allocated on the objfile's obstack instead of in the bfd objalloc:
/* If the object requires gdb to do relocations, we simply fall
back to not sharing data across users. These cases are rare
enough that this seems reasonable. */
if (abfd != NULL && !gdb_bfd_requires_relocations (abfd))
{
storage = bfd_zalloc (abfd, sizeof (struct objfile_per_bfd_storage));
set_bfd_data (abfd, objfiles_bfd_data, storage);
}
else
storage = OBSTACK_ZALLOC (&objfile->objfile_obstack,
struct objfile_per_bfd_storage);
Allocating that per_bfd storage is of course nearly useless since
we end up free-ing right after in step (4) above. Eventually,
the memory region ends up being re-used, hence the corruption
leading to the crash.
This fix was simply to move the call to set_objfile_per_bfd after
the objfile's obstack re-initialization.
gdb/ChangeLog:
* symfile.c (reread_symbols): Move call to set_objfile_per_bfd
after re-initialization of OBJFILE's obstack.
Add the sections of the symbol files that are provided via
'add-symbol-file' to the set of current target sections.
User-added sections are removed upon notification of free_objfile
when their corresponding object file is deleted.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* exec.h (add_target_sections_of_objfile): New declaration.
* exec.c (add_target_sections_of_objfile): New function.
* symfile.c (add_symbol_file_command): Update current target sections.
(symfile_free_objfile): New function.
(_initialize_symfile): Register observer for free_objfile events.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
New command for removing symbol files added via
the add-symbol-file command.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
* objfiles.c (free_objfile): Notify free_objfile.
(is_addr_in_objfile): New function.
* objfiles.h (is_addr_in_objfile): New declaration.
* printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
events instead of solib_unloaded events.
(_initialize_printcmd): Register observer for free_objfile instead
of solib_unloaded notifications.
* solib.c (remove_user_added_objfile): New function.
* symfile.c (remove_symbol_file_command): New command.
(_initialize_symfile): Add remove-symbol-file.
gdb/doc
* observer.texi: New free_objfile event.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
This moves the demangled_names_hash from the objfile into the per-BFD
object. This is part of the objfile splitting project.
The demangled names hash is independent of the program space. And, it
is needed by the symbol tables. Both of these things indicate that it
must be pushed into the per-BFD object, which this patch does.
Built and regtested on x86-64 Fedora 18.
* objfiles.c (free_objfile_per_bfd_storage): Delete the
demangled_names_hash.
(free_objfile): Don't delete the demangled_names_hash.
* objfiles.h (struct objfile_per_bfd_storage)
<demangled_names_hash>: New field.
(struct objfile) <demangled_names_hash>: Move to
objfile_per_bfd_storage.
* symfile.c (reread_symbols): Don't delete the
demangled_names_hash.
* symtab.c (create_demangled_names_hash): Update.
(symbol_set_names): Update.
* NEWS: Mention "set debug symfile".
* Makefile.in (SFILES): Add symfile-debug.c.
(COMMON_OBS): Add symfile-debug.o.
* elfread.c (elf_symfile_read): Use objfile_set_sym_fns to set the
objfile's symbol functions.
* objfiles.h (objfile_set_sym_fns): Declare.
* symfile-debug.c: New file.
* symfile.c (syms_from_objfile_1): Use objfile_set_sym_fns to set the
objfile's symbol functions.
(reread_symbols): Ditto.
All uses updated.
(add_symtab_fns): Update prototype.
* symfile.c (sym_fns_ptr): Delete. Replace with ...
(registered_sym_fns): ... this.
(symtab_fns): Update.
(add_symtab_fns): New arg "flavour". All callers updated.
(find_sym_fns): Rewrite to use new sym_fns registry.
gdb/
2013-09-24 Jan Kratochvil <jan.kratochvil@redhat.com>
Pass down original filename for objfile.
* coffread.c (coff_symfile_read): Update symbol_file_add_separate call.
* elfread.c (elf_symfile_read): Likewise.
* jit.c (jit_object_close_impl): Update allocate_objfile call, no
longer set ORIGINAL_NAME.
(jit_bfd_try_read_symtab): Update symbol_file_add_from_bfd call.
* jv-lang.c (get_dynamics_objfile): Update allocate_objfile call.
* machoread.c (macho_add_oso_symfile): Add parameter name. Update
symbol_file_add_from_bfd call.
(macho_symfile_read_all_oso): Update two macho_add_oso_symfile calls.
(macho_check_dsym): Add parameter filenamep. Change function comment.
Set *filenamep.
(macho_symfile_read): New variable dsym_filename. Update
macho_check_dsym call. Use it for symbol_file_add_separate.
* objfiles.c (allocate_objfile): Add parameter name. New comment for
it. Use it for objfile->original_name.
(objfile_name): Return OBFD's filename, if available.
* objfiles.h (allocate_objfile): Add new parameter name.
* solib.c (solib_read_symbols): Update symbol_file_add_from_bfd call.
* symfile-mem.c (symbol_file_add_from_memory): Update
symbol_file_add_from_bfd call.
* symfile.c (read_symbols): Update symbol_file_add_separate call, new
comment for it.
(symbol_file_add_with_addrs): New parameter name, add function comment
for it. Remove variable name. Update allocate_objfile call.
(symbol_file_add_separate): New parameter name, add function comment
for it. Update symbol_file_add_with_addrs call.
(symbol_file_add_from_bfd): New parameter name. Update
symbol_file_add_with_addrs call.
(symbol_file_add): Update symbol_file_add_from_bfd call.
(reread_symbols): New variable original_name. Save
objfile->original_name by it.
* symfile.h (symbol_file_add_from_bfd, symbol_file_add_separate): Add
second parameter.
gdb/
2013-09-19 Jan Kratochvil <jan.kratochvil@redhat.com>
Constification.
* main.c (captured_main): Replace catch_command_errors by
catch_command_errors_const. Twice.
* symfile.c (symbol_file_add_main_1): Make args parameter const.
(symbol_file_add): Make name parameter const.
(symbol_file_add_main, symbol_file_add_main_1): Make args parameter const.
(symfile_bfd_open): Make name parameter const, rename it to cname. Add
variable name. Change their usage accordingly.
* symfile.h (symbol_file_add, symfile_bfd_open): Make first parameter
const.
(symbol_file_add_main): Make args parameter const.
gdb/
2013-09-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* symfile.c (reread_symbols): Move variable obfd_filename to a more
inner block.
gdb/
2013-09-04 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup: Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH.
* cli/cli-cmds.c (find_and_open_script): Add OPF_RETURN_REALPATH to
variable search_flags.
* defs.h (OPF_DISABLE_REALPATH): Rename to ...
(OPF_RETURN_REALPATH): ... here.
* dwarf2read.c (try_open_dwop_file): Set OPF_RETURN_REALPATH for flags.
* exec.c (exec_file_attach): Remove OPF_DISABLE_REALPATH from openp
call. Twice.
* nto-tdep.c (nto_find_and_open_solib): Add OPF_RETURN_REALPATH for
openp call.
* solib.c (solib_find): Likewise. Four times.
* source.c (openp): Change OPF_DISABLE_REALPATH to OPF_RETURN_REALPATH
in the function comment and for the realpath_fptr variable.
(source_full_path_of): Add OPF_RETURN_REALPATH for openp call.
(find_and_open_source): Likewise. Twice.
* symfile.c (symfile_bfd_open): Likewise, also twice.
Pedro Alves <palves@redhat.com>
* symfile.c (add_symbol_file_command): Error out on unknown
option. Handle EXPECTING_SEC_ADDR/EXPECTING_SEC_NAME before '-'
options and collapse into single conditional branch.
2013-09-13 Muhammad Bilal <mbilal@codesourcery.com>
Pedro Alves <palves@redhat.com>
* gdb.base/relocate.exp: Check that invalid options are
rejected.
This moves the "gdbarch" field from the objfile into the BFD.
This field's value is derived from the BFD and is immutable over the
lifetime of the BFD. This makes it a reasonable candidate for pushing
into the per-BFD object.
This is part of the long-term objfile splitting project. In the long
run I think this patch will make it simpler to moves types from the
objfile to the per-BFD object; but the patch makes sense as a minor
cleanup by itself.
Built and regtested on x86-64 Fedora 18.
* cp-namespace.c (cp_lookup_symbol_imports_or_template): Use
get_objfile_arch.
* elfread.c (elf_rel_plt_read, elf_gnu_ifunc_record_cache)
(elf_gnu_ifunc_resolve_by_got): Use get_objfile_arch.
* jit.c (jit_object_close_impl): Update.
* jv-lang.c (get_dynamics_objfile): Update.
* linespec.c (add_minsym): Use get_dynamics_objfile.
* objfiles.c (get_objfile_bfd_data): Initialize 'gdbarch' field.
(allocate_objfile): Don't initialize 'gdbarch' field.
(get_objfile_arch): Update.
* objfiles.h (struct objfile_per_bfd_storage) <gdbarch>: New field,
moved from...
(struct objfile) <gdbarch>: ... here. Remove.
* stap-probe.c (stap_can_evaluate_probe_arguments): Use
get_objfile_arch.
* symfile.c (init_entry_point_info): Use get_objfile_arch.
With "dwz -m", "main" appears in both the PU and the importing CU when
running anon-struct.exp. However, the PU does not have a file name.
So, find_main_filename returns the empty string, making
deduce_language_from_filename return language_unknown.
This patch fixes this problem by changing gdb to use the ordinary
symbol-lookup functions to find "main"'s symbol. Then, it examines the
symbol's language.
I think this is cleaner than the current approach. For one thing it
avoids trying to guess the language based on the source file name,
instead deferring to the presumably more reliable debuginfo.
Another possible fix would have been to change how the file name is
found via the "qf" methods. However, I think the approach given is
preferable for the reason outlined above.
This required a minor test suite change, as now a symtab is expanded
during the search for "main".
Built and regtested (both ways) on x86-64 Fedora 18.
* symfile.c (set_initial_language): Look up "main" symbol
and use its language.
* symtab.c (find_main_filename): Remove.
* symtab.h (find_main_filename): Remove.
* gdb.base/maint.exp: Allow zero symtabs to be expanded.
This is another patch in my ongoing series to "split" objfile to share
more read-only data across inferiors. See
http://sourceware.org/gdb/wiki/ObjfileSplitting
When symbols are finally shared, there will be no back-link from the
symbol to its containing objfile, because there may be more than one
such objfile. So, all such back-links must be removed.
One hidden back-link is the msymbol_objfile function. Since
(eventually) a symbol may appear in more than one objfile, trying to
look up the objfile given just a symbol cannot work.
This patch removes msymbol_objfile in favor of using a bound minimal
symbol. It introduces a new function to make this conversion simpler
in some spots.
The bonus of this patch is that using msymbol_objfile is slower than
simply looking up the owning objfile in the first place.
Built and regtested on x86-64 Fedora 18.
* ada-exp.y (write_var_or_type): Use bound_minimal_symbol.
* ada-lang.c (ada_lookup_simple_minsym): Return
bound_minimal_symbol.
* ada-lang.h (ada_lookup_simple_minsym): Update.
* c-exp.y (variable): Use lookup_bound_minimal_symbol.
* f-exp.y (variable): Use lookup_bound_minimal_symbol.
* go-exp.y (variable): Use lookup_bound_minimal_symbol.
* jv-exp.y (push_expression_name): Use lookup_bound_minimal_symbol.
* m2-exp.y (variable): Use lookup_bound_minimal_symbol.
* minsyms.c (msymbol_objfile): Remove.
(lookup_minimal_symbol_internal): New function, from
lookup_minimal_symbol.
(lookup_minimal_symbol): Rewrite using
lookup_minimal_symbol_internal.
(lookup_bound_minimal_symbol): New function.
* minsyms.h (msymbol_objfile): Remove.
(lookup_bound_minimal_symbol): Declare.
* p-exp.y (variable): Use lookup_bound_minimal_symbol.
* parse.c (write_exp_msymbol): Change parameter to a
bound_minimal_symbol.
(write_dollar_variable): Use lookup_bound_minimal_symbol.
* parser-defs.h (write_exp_msymbol): Update.
* printcmd.c (address_info): Use lookup_bound_minimal_symbol.
* symfile.c (simple_read_overlay_table): Use
lookup_bound_minimal_symbol.
* symtab.c (skip_prologue_sal): Don't use msymbol_objfile.
(search_symbols): Likewise.
(print_msymbol_info): Take a bound_minimal_symbol argument.
(symtab_symbol_info, rbreak_command): Update.
* symtab.h (struct symbol_search) <msymbol>: Change type
to bound_minimal_symbol.
* valops.c (find_function_in_inferior): Use
lookup_bound_minimal_symbol.
* value.c (value_fn_field): Use lookup_bound_minimal_symbol.
find_separate_debug_file could leak a cleanup along some return paths.
* symfile.c (find_separate_debug_file): Call do_cleanups
along all return paths.
Fix some bugs pointed out by the cleanup checker. This one just fixes
some simple CLI reports, where CLI commands know that their caller
will do cleanups. This an older style with few instances, so it is
simpler to fix them up than to teach the checker about it.
* cli/cli-cmds.c (cd_command, alias_command): Call do_cleanups.
* cli/cli-dump.c (restore_binary_file): Call do_cleanups.
* interps.c (interpreter_exec_cmd): Call do_cleanups.
* source.c (show_substitute_path_command): Call do_cleanups.
(unset_substitute_path_command, set_substitute_path_command):
Likewise.
* symfile.c (load_command): Call do_cleanups.
* event-top.c (display_gdb_prompt): Call missing do_cleanups.
* infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
* symfile.c (symfile_bfd_open): New variable back_to. Do not leave
a stale cleanup. Fix double free of NAME.
of bfd_count_sections.
* solib-target.c (solib_target_relocate_section_addresses): Ditto.
* symfile.c (default_symfile_offsets): Ditto.
(syms_from_objfile_1): Ditto. Make dummy addrs list an array of
one entry, not bfd_count_sections entries.
(trace_pass_command): Likewise.
* cli/cli-cmds.c: Include cli/cli-utils.h.
(source_command): Use skip-spaces.
(disassemble_command): Likewise.
* findcmd.c: Include cli/cli-utils.h.
(parse_find_args): Use skip_spaces.
* go32-nat.c: Include cli/cli-utils.h.
(go32_sldt): Use skip_spaces.
(go32_sgdt): Likewise.
(go32_sidt): Likewise.
(go32_pde): Likewise.
(go32_pte): Likewise.
(go32_pte_for_address): Likewise.
* infcmd.c: Include cli/cli-utils.h.
(registers_info): Use skip_spaces.
* linux-tdep.c (read_mapping): Use skip_spaces_const.
(linux_info_proc): Likewise.
* linux-thread-db.c: Include cli/cli-utils.h.
(info_auto_load_libthread_db): Use skip_spaces_const.
* m32r-rom.c: Include cli/cli-utils.h.
(m32r_upload_command): Use skip_spaces.
* maint.c: Include cli/cli-utils.h.
(maintenance_translate_address): Use skip_spaces.
* mi/mi-parse.c: Include cli/cli-utils.h.
(mi_parse_argv): Use skip_spaces.
(mi_parse): Likewise.
* minsyms.c: Include cli/cli-utils.h.
(msymbol_hash_iw): Use skip_spaces_const.
* objc-lang.c: Include cli/cli-utils.h.
(parse_selector): Use skip_spaces.
(parse_method): Likewise.
* python/python.c: Include cli/cli-utils.h.
(python_interactive_command)[HAVE_PYTHON]: Use skip_spaces.
(python_command)[HAVE_PYTHON]: Likewise.
(python_interactive_command)[!HAVE_PYTHON]: Likewise.
* remote-m32r-sdi.c: Include cli/cli-utils.h.
(m32r_load): Use skip_spaces.
* serial.c: Include cli/cli-utils.h.
(serial_open): Use skip_spaces_const.
* stack.c: Include cli/cli-utils.h.
(parse_frame_specification_1): Use skip_spaces_const.
* symfile.c: Include cli/cli-utils.h.
(set_ext_lang_command): Use skip_spaces.
* symtab.c: Include cli/cli-utils.h.
(rbreak_command): Use skip_spaces.
* thread.c (thread_name_command): Use skip_spaces.
* tracepoint.c (validate_actionline): Use skip_spaces.
(encode_actions_1): Likewise.
(trace_find_range_command): Likewise.
(trace_find_outside_command): Likewise.
(trace_dump_actions): Likewise.
* symfile.c (load_section_data): Change type of load_offset
to CORE_ADDR.
(generic_load): User strtoulst instead of strtoul for conversion
of load_offset.
* elfread.c (elf_symfile_read): Limit separate debug info additions to
files with no separate debug info.
* objfiles.c (add_separate_debug_objfile): Add gdb_assert calls.
* symfile.c (read_symbols): Call find_separate_debug_file_in_section
only for files with no separate debug info.
gdb/testsuite/
* gdb.base/gnu-debugdata.exp): Create ${binfile}.debug,
${binfile}.mini_debuginfo-debuglink, add -k to xz, use now
${binfile}.mini_debuginfo-debuglink and
${binfile}.mini_debuginfo-debuglink.xz.
* symfile.c (obsavestring): Remove.
* ada-exp.y: Use obstack_copy0, not obsavestring.
* ada-lang.c: Use obstack_copy0, not obsavestring.
* coffread.c: Use obstack_copy0, not obsavestring.
* cp-namespace.c: Use obstack_copy0, not obsavestring.
* dbxread.c: Use obstack_copy0, not obsavestring.
* dwarf2read.c: Use obstack_copy0, not obsavestring.
* jit.c: Use obstack_copy0, not obsavestring.
* mdebugread.c: Use obstack_copy0, not obsavestring.
* psymtab.c: Use obstack_copy0, not obsavestring.
* stabsread.c: Use obstack_copy0, not obsavestring.
* xcoffread.c: Use obstack_copy0, not obsavestring.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
gdb/ChangeLog:
* symfile.c (syms_from_objfile_1): Renames syms_from_objfile.
Remove call to init_entry_point_info. Add OBJFILE's
section_offsets and num_sections initialization. Add note
about entry info in the function documentation.
(syms_from_objfile): New function.
* coffread.c (coff_symfile_init): Remove call to
init_entry_point_info.
* machoread.c (macho_symfile_init): Likewise.
* xcoffread.c(xcoff_symfile_init): Likewise.
and 'abfd'.
* elfread.c (elf_symfile_read): Make a cleanup for 'debugfile'
and 'abfd'.
* jit.c (jit_bfd_try_read_symtab): Make a cleanup for 'nbfd'.
* machoread.c (macho_add_oso_symfile): Make a cleanup for
'abfd'.
(macho_symfile_read): Make a cleanup for 'dsym_bfd'.
* objfiles.c (allocate_objfile): Acquire a new reference.
* rs6000-nat.c (add_vmap): Don't acquire a BFD reference.
* solib.c (solib_read_symbols): Don't acquire a BFD reference.
* spu-linux-nat.c (spu_symbol_file_add_from_memory): Make
a cleanup for 'nbfd'.
* symfile-mem.c (symbol_file_add_from_memory): Make a cleanup
for 'nbfd'.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Don't
make a cleanup for 'abfd'.
(symbol_file_add): Make a BFD cleanup.
gdb_bfd_unref.
(free_dwo_file): Use gdb_bfd_unref.
* cli/cli-dump.c: Include gdb_bfd.h.
(bfd_openw_with_cleanup): Use gdb_bfd_ref.
(bfd_openr_with_cleanup): Likewise.
* windows-nat.c (windows_make_so): Use gdb_bfd_ref,
gdb_bfd_unref.
* utils.c: Include gdb_bfd.h.
(do_bfd_close_cleanup): Use gdb_bfd_unref.
* symfile.c: Include gdb_bfd.h.
(separate_debug_file_exists): Use gdb_bfd_unref.
(bfd_open_maybe_remote): Use gdb_bfd_ref.
(symfile_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
(generic_load): Use gdb_bfd_ref.
(reread_symbols): Use gdb_bfd_unref.
* symfile-mem.c: Include gdb_bfd.h.
(symbol_file_add_from_memory): Use make_cleanup_bfd_close.
* spu-linux-nat.c (spu_bfd_open): Use gdb_bfd_ref, gdb_bfd_unref.
* solib.c: Include gdb_bfd.h.
(solib_bfd_fopen): Use gdb_bfd_ref.
(solib_bfd_open): Use gdb_bfd_unref.
(free_so_symbols): Use gdb_bfd_unref.
(reload_shared_libraries_1): Use gdb_bfd_unref.
* solib-spu.c: Include gdb_bfd.h.
(spu_bfd_fopen): Use gdb_bfd_ref, gdb_bfd_unref.
* solib-pa64.c (pa64_solib_create_inferior_hook): Use gdb_bfd_ref,
gdb_bfd_unref.
* solib-frv.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-dsbt.c: Include gdb_bfd.h.
(enable_break2): Use gdb_bfd_unref.
* solib-darwin.c: Include gdb_bfd.h.
(darwin_solib_get_all_image_info_addr_at_init): Use gdb_bfd_ref,
gdb_bfd_unref.
(darwin_bfd_open): Use gdb_bfd_unref.
* rs6000-nat.c (add_vmap): Use gdb_bfd_ref, gdb_bfd_unref.
* remote-mips.c: Include gdb_bfd.h.
(mips_load_srec): Use gdb_bfd_ref.
(pmon_load_fast): Use gdb_bfd_ref.
* remote-m32r-sdi.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
* record.c: Include gdb_bfd.h.
(record_save_cleanups): Use gdb_bfd_unref.
(cmd_record_save): Use gdb_bfd_unref.
* procfs.c (insert_dbx_link_bpt_in_file): Use gdb_bfd_ref,
gdb_bfd_unref.
* objfiles.h (gdb_bfd_close_or_warn): Remove.
(gdb_bfd_ref, gdb_bfd_unref): Move to gdb_bfd.h.
* objfiles.c: Include gdb_bfd.h.
(free_objfile): Use gdb_bfd_unref.
(gdb_bfd_close_or_warn, gdb_bfd_ref, gdb_bfd_unref): Move to
gdb_bfd.c.
* machoread.c (macho_add_oso_symfile): Use gdb_bfd_unref.
(macho_symfile_read_all_oso): Use gdb_bfd_ref, gdb_bfd_unref.
(macho_check_dsym): Likewise.
* m32r-rom.c: Include gdb_bfd.h.
(m32r_load): Use gdb_bfd_ref.
(m32r_upload_command): Use gdb_bfd_ref.
* jit.c: Include gdb_bfd.h.
(jit_bfd_try_read_symtab): Use gdb_bfd_ref, gdb_bfd_unref.
* gdb_bfd.h: New file.
* gdb_bfd.c: New file.
* gcore.c: Include gdb_bfd.h.
(create_gcore_bfd): Use gdb_bfd_ref.
(do_bfd_delete_cleanup): Use gdb_bfd_unref.
(gcore_command): Use gdb_bfd_unref.
* exec.c: Include gdb_bfd.h.
(exec_close): Use gdb_bfd_unref.
(exec_close_1): Use gdb_bfd_unref.
(exec_file_attach): Use gdb_bfd_ref.
* elfread.c: Include gdb_bfd.h.
(build_id_verify): Use gdb_bfd_unref.
* dsrec.c: Include gdb_bfd.h.
(load_srec): Use gdb_bfd_ref.
* corelow.c: Include gdb_bfd.h.
(core_close): Use gdb_bfd_unref.
(core_open): Use gdb_bfd_ref.
* bfd-target.c: Include gdb_bfd.h.
(target_bfd_xclose): Use gdb_bfd_unref.
(target_bfd_reopen): Use gdb_bfd_ref.
* Makefile.in (SFILES): Add gdb_bfd.c.
(HFILES_NO_SRCDIR): Add gdb_bfd.h.
(COMMON_OBS): Add gdb_bfd.o.
INFO.FILE_SYMTABS.
(find_linespec_symbols): Add cleanup to free CLASSES.
* symfile.c (find_separate_debug_file_by_debuglink): Add
cleanup to free DEBUGLINK.
* ui-out.c (clear_header_list): No need to check if
HEADER_NEXT.COLHDR is NULL.
Free HEADER_NEXT.COL_NAME.
* opncls.c (bfd_fopen): Always close fd on failure.
(bfd_fdopenr): Likewise.
gdb/
* symfile.c (symfile_bfd_open): Don't close desc if bfd_fopen
fails.
* solib.c (solib_bfd_fopen): Don't close fd if bfd_fopen fails.
* exec.c (exec_file_attach): Don't close scratch_chan if bfd_fopen
fails.
* dwarf2read.c (try_open_dwo_file): Don't close fd if bfd_fopen
fails.
* symfile.c (default_symfile_relocate): Use sectp->owner instead of
objfile->obfd.
* symfile.h (dwarf2_debug_sections): New member addr.
* dwarf2expr.c (execute_stack_op): New case DW_OP_GNU_addr_index.
(ctx_no_get_addr_index): New function.
* dwarf2expr.h (dwarf_expr_context_funcs): New member get_addr_index.
(ctx_no_get_addr_index): Declare.
* dwarf2-frame.c (dwarf2_frame_ctx_funcs): Update.
* dwarf2loc.c (dwarf_expr_get_addr_index): New function.
(dwarf_expr_ctx_funcs): Update.
(needs_get_addr_index): New function.
(needs_frame_ctx_funcs): Update.
* dwarf2loc.h (dwarf2_read_addr_index): Declare.
* dwarf2read.c: #include "gdbcore.h".
(dwarf2_per_objfile): New members addr, dwo_files.
(dwarf2_elf_names): Add entry for addr.
(struct dwo_section_names): New type.
(dwo_section_names): New static global.
(dwarf2_cu): New members dwo_unit, addr_base, have_addr_base.
(dwarf2_per_cu_data): New member is_debug_types, all boolean uses of
old debug_types_section member updated to use this.
Rename member debug_types_section to info_or_types_section,
all uses updated.
(signatured_type): Rename member type_offset to type_offset_in_tu,
all uses updated. New member type_offset_in_section.
(struct dwo_sections): New type.
(struct dwo_unit): New type.
(struct dwo_file): New type.
(die_reader_specs): New member dwo_file.
(dwarf2_locate_sections): Watch for .debug_addr.
(zlib_decompress_section): Use sectp->owner instead of objfile->obfd.
(dwarf2_read_section): Get bfd of section from bfd's asection,
instead of objfile.
(create_cus_from_index): Initialize the_cu->info_or_types_section.
(create_signatured_type_table_from_index): Initialize
sig_type->info_or_types_section.
(dw2_get_file_names): Statement lists for type units with DWO files
live in the DWO file.
(create_debug_types_hash_table): New function.
(create_all_type_units): Rewrite.
(init_cu_die_reader): New arg dwo_file, all callers updated.
(init_and_read_dies_worker): Get section from
this_cu->info_or_types_section. Set sig_type->type_offset_in_section.
Watch for DW_AT_GNU_dwo_name and if present lookup the file and
continue reading the CU/TU from there.
(init_cutu_and_read_dies_no_follow): New arg dwo_file, all callers
updated. Get section from this_cu->info_or_types_section.
(create_all_comp_units): Initialize this_cu->info_or_types_section.
(skip_one_die): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(hash_dwo_file, eq_dwo_file): New functions.
(allocate_dwo_file_hash_table): New function.
(hash_dwo_unit, eq_dwo_unit): New functions.
(allocate_dwo_unit_table): New function.
(dwarf2_locate_dwo_sections): New function.
(struct create_dwo_info_table_data): New type.
(create_debug_info_hash_table_reader): New function.
(create_debug_info_hash_table): New function.
(try_open_dwo_file, open_dwo_file, init_dwo_file): New function.
(lookup_dwo_file): New function.
(lookup_dwo_comp_unit, lookup_dwo_type_unit): New functions.
(free_dwo_file, free_dwo_file_cleanup): New functions.
(free_dwo_file_from_slot, free_dwo_files): New functions.
(dwarf2_get_pc_bounds): Handle DW_FORM_GNU_addr_index.
(dwarf2_record_block_ranges): Ditto.
(read_partial_die): Ditto.
(process_enumeration_scope): Update to use type_offset_in_section.
(read_full_die_1): New function.
(read_full_die): Rewrite.
(read_attribute_value): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(read_addr_index_1, read_addr_index): New functions.
(read_addr_index_from_leb128): New function.
(struct dwarf2_read_addr_index_data): New type.
(dwarf2_read_addr_index_reader): New function.
(dwarf2_read_addr_index): New function.
(read_str_index): New function.
(leb128_size): New function.
(dwarf_decode_line_header): Delete arg abfd, all callers updated.
If processing a type unit from a DWO file, get the line section
from the DWO file.
(var_decode_location): Watch for DW_OP_GNU_addr_index.
(dwarf2_const_value_attr): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(lookup_die_type): Check whether section offset of type's die is
known before looking it up. Remove assert. Condition can
legimately happen for inter-cu type references.
(dwarf_attr_name): Handle Fission attributes.
(dwarf_form_name): Handle Fission forms.
(dump_die_shallow): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(follow_die_sig): Update to use type_offset_in_section.
(decode_locdesc): New case DW_OP_GNU_addr_index.
(skip_form_bytes): New cases DW_FORM_GNU_addr_index,
DW_FORM_GNU_str_index.
(cu_debug_loc_section): New function.
(fill_in_loclist_baton, dwarf2_symbol_mark_computed): Call it.
(dwarf2_per_objfile_free): Unmap .debug_addr section.
Free DWO files if present.
* xcoffread.c (dwarf2_xcoff_names): Add .debug_addr.
testsuite/
* gdb.dwarf2/dw2-intercu.S (.Ltype_int2_in_cu2): Renamed from
.Ltype_int_in_cu2. Use name "int2" instead of "int".
All uses updated.
* gdb.dwarf2/dw2-intercu.exp: Add "ptype int2" ahead of
"ptype func_cu1" to expand cu2 before cu1.
Code cleanup.
* charset.c (find_charset_names): Remove variables ix and elt.
Use free_char_ptr_vec.
* elfread.c (build_id_to_debug_filename): New variables debugdir_vec,
back_to and ix. Use dirnames_to_char_ptr_vec. Remove variable
debugdir_end. New variable debugdir_len.
* gdb_vecs.h (free_char_ptr_vec, make_cleanup_free_char_ptr_vec)
(dirnames_to_char_ptr_vec_append, dirnames_to_char_ptr_vec): New
declarations.
* progspace.c (clear_program_space_solib_cache): Remove variables ix
and elt. Use free_char_ptr_vec.
* source.c (add_path): Remove variables argv, arg and argv_index.
New variables dir_vec, back_to, ix and name.
Use dirnames_to_char_ptr_vec_append. Use freeargv instead of
make_cleanup_freeargv. Remove variable separator. Simplify the code
no longer expecting DIRNAME_SEPARATOR.
(openp): Remove variable p, p1 and len. New variables dir_vec,
back_to, ix and dir. Use dirnames_to_char_ptr_vec. Simplify the code
no longer expecting DIRNAME_SEPARATOR.
* symfile.c (find_separate_debug_file): New variables debugdir_vec,
back_to and ix. Use dirnames_to_char_ptr_vec. Remove variable
debugdir_end.
* utils.c (free_char_ptr_vec, do_free_char_ptr_vec)
(make_cleanup_free_char_ptr_vec, dirnames_to_char_ptr_vec_append)
(dirnames_to_char_ptr_vec): New functions.
Rename objfile_p_char parameter to objfilep.
(build_objfile_section_table): Result is now void. All callers
updated.
* objfiles.h (struct objfile): Tweak comments, whitespace.
(build_objfile_section_table): Update.
symfile_flags.
* solib.c (solib_read_symbols): Use inferior's symfile_flags.
* linux-nat.c (linux_child_follow_fork): Set symfile_flags on
inferior.
* infrun.c (handle_vfork_child_exec_or_exit): Set symfile_flags on
inferior.
(follow_exec): Use inferior's symfile_flags.
* inferior.h (struct inferior) <symfile_flags>: New field.
* symfile.c (objfilep): New typedef and new DEF_VEC_P.
(reread_symbols): Remove variable reread_one, new variables
new_objfiles, all_cleanups and ix. Use new_objfiles instead of
reread_one. Push changed objfiles to new_objfiles, call
observer_notify_new_objfile for them later.
* symfile.c (reread_symbols): Move free_objfile_separate_debug,
preserve_values, sym_finish and clear_objfile_data calls before BFD
close. Move free_objfile_separate_debug as the very first call. New
comment on the ordering.
gdb/testsuite/
* gdb.base/reread.exp: If srcfile2 fails to build retry it with
-DNO_SECTIONS.
* gdb.base/reread2.c <!NO_SECTIONS>: New sections block.
Fix separate debuginfo warning with "remote:" access.
* objfiles.h (struct objfile): New fields crc32 and crc32_p.
* symfile.c (get_file_crc): New function with the code moved from ...
(separate_debug_file_exists): ... this function, specifically variables
buffer and count. New variable verified_as_different, set it. Remove
file_crc initialization. Verify also if both files are not the same
manually, if needed.
libthread_db when we load libpthread or the main symbol file.
(thread_db_inferior_created): New function.
(_initialize_thread_db): Attach inferior_created observer.
* linux-nat.c (linux_child_post_attach): Remove call to
check_for_thread_db.
(linux_child_post_startup_inferior): Ditto.
* objfiles.h (OBJF_MAINLINE): Define.
* symfile.c (symbol_file_add_with_addrs_or_offsets): Pass it to
allocate_objfile when appropriate.
bcache_xmalloc, replace bcache_xmalloc with call to
psymbol_bcache_init for psymbol_cache.
* symfile.c (reread_symbols): Remove extra calls to bcache_xmalloc.
Make addrs->SECTINDEX always defined.
* symfile.c (relative_addr_info_to_section_offsets): Check for
SECTINDEX -1, not for zero ADDR.
(addrs_section_compar): Remove checking for invalid SECTINDEX.
(addr_info_make_relative): Set SECTINDEX to -1 for unmatched entries.
* symfile.h (struct section_addr_info) <sectindex>: Update the comment
on its validity.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Do not check for
SEC_LOAD.
gdb/
Fix convert_code_addr_to_desc_addr for ppc64 files after eu-strip.
* elfread.c (elf_symfile_read): New variable synth_abfd, pass it to
bfd_get_synthetic_symtab.
* jit.c (jit_register_code): Pass NULL to the new parameter parent.
* machoread.c (macho_add_oso_symfile): Pass main_objfile to the new
parameter parent, remove the call to add_separate_debug_objfile.
* solib.c (solib_read_symbols): Pass NULL to the new parameter parent.
* symfile-mem.c (symbol_file_add_from_memory): Likewise.
* symfile.c (symbol_file_add_with_addrs_or_offsets): New parameter
parent, new comment for it, call add_separate_debug_objfile for it.
(symbol_file_add_separate): Pass objfile as the parameter parent,
remove the call to add_separate_debug_objfile.
(symbol_file_add_from_bfd): New parameter parent, pass it.
(symbol_file_add): Pass NULL to the new parameter parent.
* symfile.h (symbol_file_add_from_bfd): New parameter parent.
gdb/testsuite/
* gdb.base/eu-strip-infcall.c: New file.
* gdb.base/eu-strip-infcall.exp: New file.
This makes sure that the `load' command does not repeat when the user
presses Return again, as documented in the GDB User's Manual.
gdb/ChangeLog:
* symfile.c (find_sym_fns): Add call to dont_repeat.
Fix the `stopped language detection' testcase for gcc-4.5.
* dwarf2read.c (read_partial_die): Set also LANGUAGE_OF_MAIN.
* symfile.c (set_initial_language): Move variable filename to a more
inner block. Prefer LANGUAGE_OF_MAIN.
* symtab.c (language_of_main): New variable.
(set_main_name): Always reset LANGUAGE_OF_MAIN.
* symtab.h (language_of_main): New declaration.
* infrun.c (follow_exec): Replace symbol_file_add_main by
symbol_file_add with SYMFILE_DEFER_BP_RESET, set_initial_language and
breakpoint_re_set.
* m32r-rom.c (m32r_load, m32r_upload_command): Use parameter 0 for
clear_symtab_users.
* objfiles.c (free_all_objfiles): Likewise.
* remote-m32r-sdi.c (m32r_load): Likewise.
* solib-som.c (som_solib_create_inferior_hook): Likewise.
* symfile.c (new_symfile_objfile): New comment for add_flags. Call
clear_symtab_users with ADD_FLAGS.
(reread_symbols): Use parameter 0 for clear_symtab_users.
(clear_symtab_users): New parameter add_flags. Do not call
breakpoint_re_set if SYMFILE_DEFER_BP_RESET.
(clear_symtab_users_cleanup): Use parameter 0 for clear_symtab_users.
* symtab.h (clear_symtab_users): New parameter add_flags.
gdb/testsuite/
* gdb.base/pie-execl.exp: New file.
* gdb.base/pie-execl.c: New file.
2010-08-31 Sami Wagiaalla <swagiaal@redhat.com>
* symfile.c (reread_symbols): Use psymbol_bcache_free, and
psymbol_bcache_init.
* psymtab.h (psymbol_bcache_init): New function prototype.
(psymbol_bcache_free): New function prototype.
(psymbol_bcache_get_bcache): New function prototype.
* psymtab.c (psymbol_bcache_init): New function.
(psymbol_bcache_free): New function.
(psymbol_bcache_full): New function.
(psymbol_bcache_get_bcache): New function.
(add_psymbol_to_bcache): use psymbol_bcache_full.
* objfiles.h (psymbol_cache): Change type of psymbol_cache to
psymbol_bcache.
* symmisc.c (print_symbol_bcache_statistics): Updated.
(print_objfile_statistics): Updated.
* objfiles.c (allocate_objfile): Use psymbol_bcache_init to initialize
psymbol_cache.
(free_objfile): Use psymbol_bcache_free.
2010-08-25 Sami Wagiaalla <swagiaal@redhat.com>
* psymtab.c (add_psymbol_to_bcache): Remove 'static' from
'static partial_symbol psymbol'.
(psymbol_hash): New function.
(psymbol_compare): New function.
* bcache.c (hash_continue): New.
(hash): Use hash_continue.
* bcache.c: Add hash_function and compare_function
pointers to bcache struct.
(bcache_full): Use bcache->hash_function, and
bcache->compare_function.
(bcache_compare): New function.
(bcache_xmalloc): Take hash_function and
compare_function arguments and initialize the
bcach's pointers.
Updated comment.
* objfiles.c (allocate_objfile): Updated.
* symfile.c (reread_symbols): Updated.
* python/py-type.c (typy_richcompare): Updated.
* symfile.c (addr_section_name): New function.
(addrs_section_compar): Use it.
(addr_info_make_relative): Use it. Move variable sect_name into a more
inner block. Make ".dynbss" and ".sdynbss" checks more strict.
gdb/testsuite/
* gdb.base/prelink-lib.c (copyreloc): New initialized variable.
* gdb.base/prelink.c (copyreloc, bssvar, bssvarp): New variables.
(main): Use copyreloc.
* gdb.base/prelink.exp (split debug of executable)
(.dynbss vs. .bss address shift): New tests.
* symfile.c (find_separate_debug_file_by_debuglink): Remove
a gdb_assert call, new comment.
gdb/testsuite/
* gdb.base/solib-nodir.exp: New file.
* lib/gdb.exp (runto): New case for a GDB internal error.
* scm-exp.c: White space.
* scm-lang.c: White space.
* scm-valprint.c: White space.
* sentinel-frame.c: White space.
* ser-base.c: White space.
* ser-go32.c: White space.
* serial.c: White space.
* ser-mingw.c: White space.
* ser-pipe.c: White space.
* ser-tcp.c: White space.
* ser-unix.c: White space.
* solib.c: White space.
* solib-darwin.c: White space.
* solib-frv.c: White space.
* solib-irix.c: White space.
* solib-osf.c: White space.
* solib-pa64.c: White space.
* solib-som.c: White space.
* solib-spu.c: White space.
* solib-svr4.c: White space.
* solib-target.c: White space.
* source.c: White space.
* stabsread.c: White space.
* stack.c: White space.
* std-regs.c: White space.
* symfile.c: White space.
* symmisc.c: White space.
* symtab.c: White space.
* dwarf2read.c (typename_concat): Use (char *) NULL terminated stdarg
list for the obconcat call.
* mdebugread.c (parse_symbol): Likewise.
* stabsread.c (define_symbol, read_member_functions, read_cpp_abbrev):
Likewise.
* symfile.c (obconcat): Replace the s1, s2 and s3 parameters by `...'.
New variable ap. Remove variables len and val.
* symfile.h (obconcat): Likewise for the prototype.
The .dg files are files containing the user's code, after the GNAT
expander was applied. The expansion replaces some of the complex
features by simpler pseudo-Ada code and the user can ask to see and
debug that code using the -gnatDG option...
For instance, given the following code where Circle is a tagged type
(aka as a class type in C++):
procedure Foo is
My_Shape : Circle := (X => 1, Y => 2, R => 3);
X : Integer;
begin
X := Position_X (My_Shape);
end Foo;
The expansion results in:
procedure foo is
my_shape : pck__circle := (
_parent => (
_tag => pck__circleP,
x => 1,
y => 2),
r => 3);
x : integer;
begin
x := pck__position_x (my_shape);
return;
end foo;
2010-04-27 Joel Brobecker <brobecker@adacore.com>
* symfile.c (init_filename_language_table): Register .dg files
with language_ada.
On Darwin, we have lots of complaints being emitted when restarting
a program:
(gdb) start
`a-except.o' has disappeared; keeping its symbols.
`unwind-dw2.o' has disappeared; keeping its symbols.
`s-except.o' has disappeared; keeping its symbols.
`s-traceb.o' has disappeared; keeping its symbols.
These object files are part of the GNAT runtime, and were never available.
The warning comes from the fact that we're checking whether the .o files
in the GNAT shared runtime have changed whereas we should be checking
whether the GNAT shared library itself has changed.
This patch implements this. Although it is really only useful on a platform
such as Darwin (debug info stored in .o files), we believe that this is
the right thing to do in general. This change should be a noop for all
the other platforms in any case.
gdb/ChangeLog (from Tristan Gingold & Pedro Alves):
* symfile.c (reread_symbols): Also search for file in libraries.
Update comment.
Tested on x86_64-darwin and x86_64-linux.
* objfiles.c: Include solist.h.
(free_all_objfiles): New variable so. Check stale solist objfiles.
* symfile.c (symbol_file_clear): Swap the order of free_all_objfiles
and no_shared_libraries.
* symfile.c (build_section_addr_info_from_bfd): New.
(build_section_addr_info_from_objfile): Base it on
build_section_addr_info_from_bfd.
(addrs_section_compar, addrs_section_sort): New.
(addr_info_make_relative): New variables my_cleanup, abfd_addrs,
addrs_sorted, abfd_addrs_sorted and addrs_to_abfd_addrs. Build
addrs_to_abfd_addrs. Use it for recalculating ADDRS.
gdb/testsuite/
* gdb.base/dup-sect.exp, gdb.base/dup-sect.S: New.
* symfile.c (addr_info_make_relative): Extend comment. Move SECT to
a more inner block. Initialize ADDR by LOWER_OFFSET only if it was
found by bfd_get_section_by_name.
* symfile.h (struct section_addr_info) <sectindex>: New comment.
Fix displacement of separate debug info files.
* objfiles.c (objfile_relocate): Rename to ...
(objfile_relocate1): ... here and make it static. Extend the comment.
(objfile_relocate): New function.
* solib-spu.c (spu_relocate_main_executable): Explicitly check if
SYMFILE_OBJFILE is NULL. Remove variables objfile and old_chain.
Remove following of SEPARATE_DEBUG_OBJFILE. new_offsets is now
allocated using alloca.
* symfile.c (copy_section_addr_info): Remove.
(build_section_addr_info_from_objfile): Make it global. New variables
addr_bit and mask, use them.
* symfile.h (build_section_addr_info_from_objfile): New prototype.
(copy_section_addr_info): Remove.
Move some symfile code into subroutines.
* symfile.h (relative_addr_info_to_section_offsets)
(addr_info_make_relative): New prototypes.
* symfile.c (default_symfile_offsets): Move a part to ...
(relative_addr_info_to_section_offsets): ... this new function.
(default_symfile_offsets): Call it.
(syms_from_objfile <!mainline && addrs && addrs->other[0].name>): Move
this part to ...
(addr_info_make_relative): ... this new function.
* symtab.c (lookup_global_symbol_from_objfile): Rename objfile
parameter to main_objfile. Iterate on all separate debug objfiles.
* symfile.h (symbol_file_add_separate)
(find_separate_debug_file_by_debuglink): Remove parameter names.
* symfile.c (symbol_file_add_separate): Use add_separate_objfile.
(reread_symbols): Use free_objfile_separate_debug.
* objfiles.h (struct objfile): Add separate_debug_objfile_link.
Adjust comment.
(objfile_separate_debug_iterate, add_separate_debug_objfile)
(free_objfile_separate_debug): New prototypes.
* objfiles.c (objfile_separate_debug_iterate): New function.
(add_separate_debug_objfile, free_objfile_separate_debug): New
functions.
(free_objfile): Use free_objfile_separate_debug. Adjust for
multiple separate debug objfile.
(objfile_has_symbols): Adjust comment. Iterate on all separate
debug objfiles.
* minsyms.c (lookup_minimal_symbol): Adjust for multiple separate
debug objfile.
(lookup_minimal_symbol_text): Ditto.
(lookup_minimal_symbol_by_pc_name): Ditto.
(lookup_minimal_symbol_solib_trampoline): Ditto.
(lookup_minimal_symbol_by_pc_section_1): Iterate on all separate
debug objfiles.
* symfile.h (symbol_file_add_separate): New prototype.
(find_separate_debug_file_by_buildid): Ditto.
(find_separate_debug_file_by_debuglink): Ditto.
* symfile.c (reread_separate_symbols): Remove.
(find_separate_debug_file): Split into ...
(find_separate_debug_file_by_buildid): ... this and ...
(find_separate_debug_file_by_debuglink): ... this.
(symbol_file_add_with_addrs_or_offsets): Do not save orig_addrs.
Remove separate debug file handling.
(symbol_file_add_separate): New function.
(reread_symbols): Do not considere separate debug files, but free
them while handling their parent. Reindent.
* coffread.c (coff_symfile_read): Handle separate object file.
* elfread.c (elf_symfile_read): Ditto.
* symfile.c (separate_debug_file_exists): Change parameter parent_name
to parent_objfile. New variables parent_stat and abfd_stat. Call
strcmp and then bfd_stat functions to verify if NAME matches.
(find_separate_debug_file): Update the passed parameter at caller.
has_ranges_offset.
(struct partial_die_info): Remove language, has_stmt_list, dirname,
and line_offset.
(dwarf2_build_include_psymtabs): Take a die_info. Handle a missing
line table.
(dwarf2_get_pc_bounds): Take PST argument. Pass it
to dwarf2_ranges_read. Update all callers.
(init_cu_die_reader): Move earlier.
(dwarf2_find_base_address): New function.
(process_psymtab_comp_unit): Rewrite to use a full DIE for the
compilation unit. Use dwarf2_get_pc_bounds and
dwarf2_find_base_address.
(load_comp_unit): Rewrite to use a full DIE for the compilation unit.
(process_full_comp_unit): Use dwarf2_find_base_address.
(read_partial_die): Remove support for attributes only used
in the compilation unit DIE.
* symfile.c (allocate_psymtab): Make FILENAME const.
(start_psymtab_common): Likewise.
* symfile.h (allocate_psymtab, start_psymtab_common): Update
prototypes.
