8sa1-binutils-gdb

Author	SHA1	Message	Date
Pedro Alves	616268b639	Move "tee" building down to interpreter::set_logging_proc This patch gets rid of this hack in mi_set_logging: /* The tee created already is based on gdb_stdout, which for MI is a console and so we end up in an infinite loop of console writing to ui_file writing to console etc. So discard the existing tee (it hasn't been used yet, and MI won't ever use it), and create one based on raw_stdout instead. / By pushing down responsibility for the tee creation to the interpreter. I.e., pushing the CLI bits out of handle_redirections down to the CLI interpreter's set_logging_proc method. This fixes a few leaks that I spotted, and then confirmed with "valgrind --leak-check=full": [...] ==21429== 56 (32 direct, 24 indirect) bytes in 1 blocks are definitely lost in loss record 30,243 of 34,980 ==21429== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334) ==21429== by 0x62D9A9: mi_set_logging(interp, int, ui_file, ui_file) (mi-interp.c:1395) ==21429== by 0x810B8A: current_interp_set_logging(int, ui_file, ui_file) (interps.c:360) ==21429== by 0x61C537: handle_redirections(int) (cli-logging.c:162) ==21429== by 0x61C6EC: set_logging_on(char, int) (cli-logging.c:190) ==21429== by 0x6163BE: do_cfunc(cmd_list_element, char, int) (cli-decode.c:105) ==21429== by 0x6193C1: cmd_func(cmd_list_element, char, int) (cli-decode.c:1913) ==21429== by 0x8DB790: execute_command(char, int) (top.c:674) ==21429== by 0x632AE6: mi_execute_cli_command(char const, int, char const) (mi-main.c:2343) ==21429== by 0x6329BA: mi_cmd_execute(mi_parse) (mi-main.c:2306) ==21429== by 0x631E19: captured_mi_execute_command(ui_out, mi_parse) (mi-main.c:1998) ==21429== by 0x632389: mi_execute_command(char const, int) (mi-main.c:2163) ==21429== [...] ==26635== 24 bytes in 1 blocks are definitely lost in loss record 20,740 of 34,995 ==26635== at 0x4C29216: operator new(unsigned long) (vg_replace_malloc.c:334) ==26635== by 0x61C355: handle_redirections(int) (cli-logging.c:131) ==26635== by 0x61C6EC: set_logging_on(char, int) (cli-logging.c:190) ==26635== by 0x6163BE: do_cfunc(cmd_list_element, char, int) (cli-decode.c:105) ==26635== by 0x6193C1: cmd_func(cmd_list_element, char, int) (cli-decode.c:1913) ==26635== by 0x8DB7BC: execute_command(char, int) (top.c:674) ==26635== by 0x7B9132: command_handler(char) (event-top.c:590) ==26635== by 0x7B94F7: command_line_handler(char) (event-top.c:780) ==26635== by 0x7B8ABB: gdb_rl_callback_handler(char) (event-top.c:213) ==26635== by 0x933CE9: rl_callback_read_char (callback.c:220) ==26635== by 0x7B89ED: gdb_rl_callback_read_char_wrapper_noexcept() (event-top.c:175) ==26635== by 0x7B8A49: gdb_rl_callback_read_char_wrapper(void) (event-top.c:192) One is fixed by transfering ownership of the log file to the tee. In pseudo-patch, since the code was moved at the same time: - out = new tee_file (curr_output, false, logfile.get (), false); + out = new tee_file (curr_output, false, logfile.get (), true); The other is this bit in mi_set_logging: else { + delete mi->raw_stdout; I tried to split the leak fixes to a smaller preparatory patch, but that was difficult exactly because of the tee hack in handle_redirections -> mi_set_logging. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * cli/cli-interp.c (struct saved_output_files, saved_output): Moved from cli/cli-logging.c. (cli_set_logging): New function. (cli_interp_procs): Install cli_set_logging. * cli/cli-interp.h (make_logging_output, cli_set_logging): Declare. * cli/cli-logging.c (struct saved_output_files, saved_output): Moved to cli/cli-interp.c. (pop_output_files): Don't save outputs here. (make_logging_output): New function. (handle_redirections): Don't build tee nor save previous outputs here. * interps.c (current_interp_set_logging): Change prototype. Assume there's always a set_logging_proc method installed. * interps.h (interp_set_logging_ftype): Change prototype. (current_interp_set_logging): Change prototype and adjust comment. * mi/mi-interp.c (mi_set_logging): Change protototype. Adjust to use make_logging_output. * tui/tui-interp.c (tui_interp_procs): Install cli_set_logging.	2017-02-02 22:00:43 +00:00
Pedro Alves	5be5dbf0ce	Fix "-gdb-set logging redirect on" crash This commit fixes a "-gdb-set logging redirect on" crash by not handling "logging redirect on" on the fly. Previous discussion here: https://sourceware.org/ml/gdb-patches/2017-01/msg00467.html Code for handling "logging redirect on" on the fly was added here: https://sourceware.org/ml/gdb-patches/2010-08/msg00202.html Meanwhile, MI gained support for logging, but flipping redirect "on" on the fly was not considered. The result is that this sequence of commands crashes GDB: -gdb-set logging on -gdb-set logging redirect on Program received signal SIGSEGV, Segmentation fault. 0x00000000008dd7bc in gdb_flush (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95 194 file->to_flush (file); (top-gdb) bt #0 0x00000000008dd7bc in gdb_flush(ui_file) (file=0x2a097f0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/ui-file.c:95 #1 0x00000000007b5f34 in gdb_wait_for_event(int) (block=0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:752 #2 0x00000000007b52b6 in gdb_do_one_event() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:322 #3 0x00000000007b5362 in start_event_loop() () at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/event-loop.c:371 #4 0x000000000082704a in captured_command_loop(void) (data=0x0) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:325 #5 0x00000000007b8d7c in catch_errors(int ()(void), void, char, return_mask) (func=0x827008 <captured_command_loop(void)>, func_args=0x0, errstring=0x11dee51 "", mask=RETURN_MASK_ALL) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/exceptions.c:236 #6 0x000000000082839b in captured_main(void) (data=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1148 During symbol reading, cannot get low and high bounds for subprogram DIE at 24065. #7 0x00000000008283c4 in gdb_main(captured_main_args) (args=0x7fffffffd820) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/main.c:1158 #8 0x0000000000412d4d in main(int, char) (argc=4, argv=0x7fffffffd928) at /home/pedro/gdb/mygit/cxx-convertion/src/gdb/gdb.c:32 The handling of redirect on the fly is not really a use case we need to handle, IMO. Its inconsistent (other "set logging foo" commands aren't handled on the fly), and complicates the code significantly. Instead of complicating it further for MI, go back to the original idea of warning, only: https://sourceware.org/ml/gdb-patches/2010-08/msg00083.html New test included. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> cli/cli-logging.c (maybe_warn_already_logging): New factored out from ... (set_logging_overwrite): ... here. (logging_no_redirect_file): Delete. (set_logging_redirect): Don't handle redirection on the fly. Instead warn that "logging off" / "logging on" is necessary. (pop_output_files): Delete references to logging_no_redirect_file. (show_logging_command): Always speak in terms of what will happen once logging is reenabled. gdb/testsuite/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * gdb.mi/mi-logging.exp: Add "redirect while already logging" tests.	2017-02-02 11:39:56 +00:00
Pedro Alves	d7e747318f	Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE ' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file '. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file '. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file '. compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file '. compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file '. Adjust. compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file '. cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file '. dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file ' instead of a 'ui_file '. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file ' instead of a 'ui_file '. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file '. Adjust. ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file '. Adjust. utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file '. varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.	2017-02-02 11:11:47 +00:00
Simon Marchi	7becfd03ba	Change return type of ui_out redirect to void All implementations of redirect/do_redirect in the ui_out subsystem always return 0 (success). We can therefore clean it up and make them return void. gdb/ChangeLog: * cli-out.c (cli_ui_out::do_redirect): Change return type to void. * cli-out.h (cli_ui_out::do_redirect): Likewise. * mi/mi-out.c (mi_ui_out::do_redirect): Likewise. * mi/mi-out.h (mi_ui_out::do_redirect): Likewise. * ui-out.c (ui_out::redirect): Likewise. * ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise. * cli/cli-logging.c (set_logging_redirect): Update call site of ui_out::redirect. (handle_redirections): Likewise. * scm-ports.c (ioscm_with_output_to_port_worker): Likewise. * top.c (execute_command_to_string): Likewise. * utils.c (do_ui_out_redirect_pop): Likewise.	2017-01-10 11:32:04 -05:00
Joel Brobecker	61baf725ec	update copyright year range in GDB files This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.	2017-01-01 10:52:34 +04:00
Simon Marchi	112e8700a6	Class-ify ui_out This patch finalizes the C++ conversion of the ui-out subsystem, by turning the ui_out and ui_out_impl structures into a single class hierarchy. ui_out functions are turned into virtual methods of that new class, so as a result there are a lot of call sites to update. In the previous version of the patchset, there were separate ui_out and ui_out_impl classes, but it wasn't really useful and added boilerplate. In this version there is simply an ui_out base class that is extended for CLI, TUI and MI. It's a bit hard to maintain a ChangeLog for such a big patch, I did my best but I'm sure there are some missing or outdated info in there... gdb/ChangeLog: * ui-out.h (ui_out_begin, ui_out_end, ui_out_table_header, ui_out_table_body, ui_out_field_int, ui_out_field_fmt_int, ui_out_field_core_addr, ui_out_field_string, ui_out_field_stream, ui_out_field_fmt, ui_out_field_skip, ui_out_spaces, ui_out_text, ui_out_message, ui_out_wrap_hint, ui_out_flush, ui_out_test_flags, ui_out_query_field, ui_out_is_mi_like_p, ui_out_redirect): Remove, replace with a method in class ui_out. (table_begin_ftype): Remove, replace with pure virtual method in class ui_out. (table_body_ftype): Likewise. (table_end_ftype): Likewise. (table_header_ftype): Likewise. (ui_out_begin_ftype): Likewise. (ui_out_end_ftype): Likewise. (field_int_ftype): Likewise. (field_skip_ftype): Likewise. (field_string_ftype): Likewise. (field_fmt_ftype): Likewise. (spaces_ftype): Likewise. (text_ftype): Likewise. (message_ftype): Likewise. (wrap_hint_ftype): Likewise. (flush_ftype): Likewise. (redirect_ftype): Likewise. (data_destroy_ftype): Likewise. (struct ui_out_impl): Remove, replace with class ui_out. (ui_out_new): Remove. (class ui_out): New class. * ui-out.c (struct ui_out): Remove, replaced with class ui_out. (current_level): Remove, replace with ui_out method. (push_level): Likewise. (pop_level): Likewise. (uo_table_begin, uo_table_body, uo_table_end, uo_table_header, uo_begin, uo_end, uo_field_int, uo_field_skip, uo_field_fmt, uo_spaces, uo_text, uo_message, uo_wrap_hint, uo_flush, uo_redirect, uo_field_string): Remove. (ui_out_table_begin): Replace with ... (ui_out::table_begin): ... this. (ui_out_table_body): Replace with ... (ui_out::table_body): ... this. (ui_out_table_end): Replace with ... (ui_out::table_end): ... this. (ui_out_table_header): Replace with ... (ui_out::table_header): ... this. (ui_out_begin): Replace with ... (ui_out::begin): ... this. (ui_out_end): Replace with ... (ui_out::end): ... this. (ui_out_field_int): Replace with ... (ui_out::field_int): ... this. (ui_out_field_fmt_int): Replace with ... (ui_out::field_fmt_int): ... this. (ui_out_field_core_addr): Replace with ... (ui_out::field_core_addr): ... this. (ui_out_field_stream): Replace with ... (ui_out::field_stream): ... this. (ui_out_field_skip): Replace with ... (ui_out::field_skip): ... this. (ui_out_field_string): Replace with ... (ui_out::field_string): ... this. (ui_out_field_fmt): Replace with ... (ui_out::field_fmt): ... this. (ui_out_spaces): Replace with ... (ui_out::spaces): ... this. (ui_out_text): Replace with ... (ui_out::text): ... this. (ui_out_message): Replace with ... (ui_out::message): ... this. (ui_out_wrap_hint): Replace with ... (ui_out::wrap_hint): ... this. (ui_out_flush): Replace with ... (ui_out::flush): ... this. (ui_out_redirect): Replace with ... (ui_out::redirect): ... this. (ui_out_test_flags): Replace with ... (ui_out::test_flags): ... this. (ui_out_is_mi_like_p): Replace with ... (ui_out::is_mi_like_p): ... this. (verify_field): Replace with ... (ui_out::verify_field): ... this. (ui_out_query_field): Replace with ... (ui_out::query_table_field): ... this. (ui_out_data): Remove. (ui_out_new): Remove, replace with ... (ui_out::ui_out): ... this constructor. (do_cleanup_table_end, make_cleanup_ui_out_tuple_begin_end, do_cleanup_end, make_cleanup_ui_out_tuple_begin_end, make_cleanup_ui_out_list_begin_end): Update fallouts of struct ui_out -> class ui_out change. * cli-out.c (cli_out_data): Remove. (cli_uiout_dtor): Remove. (cli_table_begin): Replace with ... (cli_ui_out::do_table_begin): ... this new method. (cli_table_body): Replace with ... (cli_ui_out::do_table_body): ... this new method. (cli_table_end): Replace with ... (cli_ui_out::do_table_end): ... this new method. (cli_table_header): Replace with ... (cli_ui_out::do_table_header): ... this new method. (cli_begin): Replace with ... (cli_ui_out::do_begin): ... this new method. (cli_end): Replace with ... (cli_ui_out::do_end): ... this new method. (cli_field_int): Replace with ... (cli_ui_out::do_field_int): ... this new method. (cli_field_skip): Replace with ... (cli_ui_out::do_field_skip): ... this new method. (cli_field_string): Replace with ... (cli_ui_out::do_field_string): ... this new method. (cli_field_fmt): Replace with ... (cli_ui_out::do_field_fmt): ... this new method. (cli_spaces): Replace with ... (cli_ui_out::do_spaces): ... this new method. (cli_text): Replace with ... (cli_ui_out::do_text): ... this new method. (cli_message): Replace with ... (cli_ui_out::do_message): ... this new method. (cli_wrap_hint): Replace with ... (cli_ui_out::do_wrap_hint): ... this new method. (cli_flush): Replace with ... (cli_ui_out::do_flush): ... this new method. (cli_redirect): Replace with ... (cli_ui_out::do_redirect): ... this new method. (out_field_fmt): Replace with ... (cli_ui_out::out_field_fmt): ... this new method. (field_separator): Replace with ... (cli_ui_out::field_separator): ... this new method. (cli_out_set_stream): Replace with ... (cli_ui_out::set_stream): ... this new method. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_ui_out_impl::cli_ui_out_impl): New constructor. (cli_ui_out_impl::~cli_ui_out_impl): New destructor. (cli_out_new): Change return type to cli_ui_out , instantiate a cli_ui_out. cli-out.h (cli_ui_out_data): Remove, replace with class cli_ui_out. (class cli_ui_out): New class. (cli_ui_out_impl): Remove. (cli_out_data_ctor): Remove. (cli_out_new): Change return type to cli_ui_out. (cli_out_set_stream): Remove. cli/cli-interp.c (struct cli_interp) <cli_uiout>: Change type to cli_ui_out. (cli_interpreter_resume): Adapt. (cli_interpreter_exec): Adapt. mi/mi-out.c (mi_ui_out_data, mi_out_data): Remove. (mi_ui_out_impl): Remove. (mi_table_begin): Replace with ... (mi_ui_out::do_table_begin): ... this. (mi_table_body): Replace with ... (mi_ui_out::do_table_body): ... this. (mi_table_end): Replace with ... (mi_ui_out::do_table_end): ... this. (mi_table_header): Replace with ... (mi_ui_out::do_table_header): ... this. (mi_begin): Replace with ... (mi_ui_out::do_begin): ... this. (mi_end): Replace with ... (mi_ui_out::do_end): ... this. (mi_field_int): Replace with ... (mi_ui_out::do_field_int): ... this. (mi_field_skip): Replace with ... (mi_ui_out::do_field_skip): ... this. (mi_field_string): Replace with ... (mi_ui_out::do_field_string): ... this. (mi_field_fmt): Replace with ... (mi_ui_out::do_field_fmt): ... this. (mi_spaces): Replace with ... (mi_ui_out::do_spaces): ... this. (mi_text): Replace with ... (mi_ui_out::do_text): ... this. (mi_message): Replace with ... (mi_ui_out::do_message): ... this. (mi_wrap_hint): Replace with ... (mi_ui_out::do_wrap_hint): ... this. (mi_flush): Replace with ... (mi_ui_out::do_flush): ... this. (mi_redirect): Replace with ... (mi_ui_out::do_redirect): (field_separator): Replace with ... (mi_ui_out::field_separator): (mi_open): Replace with ... (mi_ui_out::open): ... this. (mi_close): Replace with ... (mi_ui_out::close): ... this. (mi_out_rewind): Replace with ... (mi_ui_out::rewind): ... this. (mi_out_put): Replace with ... (mi_ui_out::put): ... this. (mi_version): Replace with ... (mi_ui_out::version): ... this. (mi_out_data_ctor): Replace with ... (mi_ui_out::mi_ui_out): ... this. (mi_out_data_dtor): Replace with ... (mi_ui_out::~mi_ui_out): ... this. (mi_out_new): Change return type to mi_ui_out, instantiate an mi_ui_out object. (as_mi_ui_out): New function. (mi_version): Update fallouts of struct ui_out to class ui_out transition. (mi_out_put): Likewise. (mi_out_rewind): Likewise. mi/mi-out.h (mi_out_new): Change return type to mi_ui_out. tui/tui-out.c (tui_ui_out_data, tui_out_data, tui_ui_out_impl): Remove. (tui_field_int): Replace with ... (tui_ui_out::do_field_int): ... this. (tui_field_string): Replace with ... (tui_ui_out::do_field_string): ... this. (tui_field_fmt): Replace with ... (tui_ui_out::do_field_fmt): ... this. (tui_text): Replace with ... (tui_ui_out::do_text): ... this. (tui_out_new): Change return type to tui_ui_out, instantiate tui_ui_out object. (tui_ui_out::tui_ui_out): New. tui/tui-out.h: New file. * tui/tui.h (tui_out_new): Move declaration to tui/tui-out.h. * tui/tui-io.c: Include tui/tui-out.h. (tui_old_uiout): Change type to cli_ui_out. (tui_setup_io): Use dynamic_cast. tui/tui-io.h (tui_old_uiout): Change type to cli_ui_out. tui/tui-interp.c (tui_resume): Adapt. * ada-lang.c (print_it_exception): Update fallouts of struct ui_out to class ui_out transition. (print_one_exception): Likewise. (print_mention_exception): Likewise. * ada-tasks.c (print_ada_task_info): Likewise. (info_task): Likewise. (task_command): Likewise. * auto-load.c (print_script): Likewise. (auto_load_info_scripts): Likewise. (info_auto_load_cmd): Likewise. * break-catch-sig.c (signal_catchpoint_print_one): Likewise. * break-catch-syscall.c (print_it_catch_syscall): Likewise. (print_one_catch_syscall): Likewise. * break-catch-throw.c (print_it_exception_catchpoint): Likewise. (print_one_exception_catchpoint): Likewise. (print_one_detail_exception_catchpoint): Likewise. (print_mention_exception_catchpoint): Likewise. * breakpoint.c (maybe_print_thread_hit_breakpoint): Likewise. (print_solib_event): Likewise. (watchpoint_check): Likewise. (wrap_indent_at_field): Likewise. (print_breakpoint_location): Likewise. (output_thread_groups): Likewise. (print_one_breakpoint_location): Likewise. (breakpoint_1): Likewise. (default_collect_info): Likewise. (watchpoints_info): Likewise. (print_it_catch_fork): Likewise. (print_one_catch_fork): Likewise. (print_it_catch_vfork): Likewise. (print_one_catch_vfork): Likewise. (print_it_catch_solib): Likewise. (print_one_catch_solib): Likewise. (print_it_catch_exec): Likewise. (print_one_catch_exec): Likewise. (mention): Likewise. (print_it_ranged_breakpoint): Likewise. (print_one_ranged_breakpoint): Likewise. (print_one_detail_ranged_breakpoint): Likewise. (print_mention_ranged_breakpoint): Likewise. (print_it_watchpoint): Likewise. (print_mention_watchpoint): Likewise. (print_it_masked_watchpoint): Likewise. (print_one_detail_masked_watchpoint): Likewise. (print_mention_masked_watchpoint): Likewise. (bkpt_print_it): Likewise. (tracepoint_print_one_detail): Likewise. (tracepoint_print_mention): Likewise. (update_static_tracepoint): Likewise. (tracepoints_info): Likewise. (save_breakpoints): Likewise. * cli/cli-cmds.c (complete_command): Likewise. * cli/cli-logging.c (set_logging_redirect): Likewise. (pop_output_files): Likewise. (handle_redirections): Likewise. * cli/cli-script.c (print_command_lines): Likewise. * cli/cli-setshow.c (do_show_command): Likewise. (cmd_show_list): Likewise. * cp-abi.c (list_cp_abis): Likewise. (show_cp_abi_cmd): Likewise. * darwin-nat-info.c (darwin_debug_regions_recurse): Likewise. * disasm.c (gdb_pretty_print_insn): Likewise. (do_mixed_source_and_assembly_deprecated): Likewise. (do_mixed_source_and_assembly): Likewise. * gdb_bfd.c (print_one_bfd): Likewise. (maintenance_info_bfds): Likewise. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Likewise. * guile/scm-ports.c (ioscm_with_output_to_port_worker): Likewise. * i386-linux-tdep.c (i386_linux_handle_segmentation_fault): Likewise. * i386-tdep.c (i386_mpx_print_bounds): Likewise. * infcmd.c (run_command_1): Likewise. (print_return_value_1): Likewise. * inferior.c (print_selected_inferior): Likewise. (print_inferior): Likewise. * infrun.c (print_end_stepping_range_reason): Likewise. (print_signal_exited_reason): Likewise. (print_exited_reason): Likewise. (print_signal_received_reason): Likewise. (print_no_history_reason): Likewise. * interps.c (interp_set): Likewise. * linespec.c (decode_line_full): Likewise. * linux-thread-db.c (info_auto_load_libthread_db): Likewise. * mi/mi-cmd-env.c (mi_cmd_env_pwd): Likewise. (mi_cmd_env_path): Likewise. (mi_cmd_env_dir): Likewise. (mi_cmd_inferior_tty_show): Likewise. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Likewise. (print_partial_file_name): Likewise. (mi_cmd_file_list_exec_source_files): Likewise. * mi/mi-cmd-info.c (mi_cmd_info_ada_exceptions): Likewise. (mi_cmd_info_gdb_mi_command): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_info_depth): Likewise. (mi_cmd_stack_list_args): Likewise. (list_arg_or_local): Likewise. * mi/mi-cmd-var.c (print_varobj): Likewise. (mi_cmd_var_create): Likewise. (mi_cmd_var_delete): Likewise. (mi_cmd_var_set_format): Likewise. (mi_cmd_var_show_format): Likewise. (mi_cmd_var_info_num_children): Likewise. (mi_cmd_var_list_children): Likewise. (mi_cmd_var_info_type): Likewise. (mi_cmd_var_info_path_expression): Likewise. (mi_cmd_var_info_expression): Likewise. (mi_cmd_var_show_attributes): Likewise. (mi_cmd_var_evaluate_expression): Likewise. (mi_cmd_var_assign): Likewise. (varobj_update_one): Likewise. * mi/mi-interp.c (as_mi_interp): Likewise. (mi_on_normal_stop_1): Likewise. (mi_tsv_modified): Likewise. (mi_breakpoint_created): Likewise. (mi_breakpoint_modified): Likewise. (mi_solib_loaded): Likewise. (mi_solib_unloaded): Likewise. (mi_command_param_changed): Likewise. (mi_memory_changed): Likewise. (mi_user_selected_context_changed): Likewise. * mi/mi-main.c (print_one_inferior): Likewise. (output_cores): Likewise. (list_available_thread_groups): Likewise. (mi_cmd_data_list_register_names): Likewise. (mi_cmd_data_list_changed_registers): Likewise. (output_register): Likewise. (mi_cmd_data_evaluate_expression): Likewise. (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_list_features): Likewise. (mi_cmd_list_target_features): Likewise. (mi_cmd_add_inferior): Likewise. (mi_execute_command): Likewise. (mi_load_progress): Likewise. (print_variable_or_computed): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Likewise. * osdata.c (info_osdata_command): Likewise. * probe.c (gen_ui_out_table_header_info): Likewise. (print_ui_out_not_applicables): Likewise. (print_ui_out_info): Likewise. (info_probes_for_ops): Likewise. (enable_probes_command): Likewise. (disable_probes_command): Likewise. * progspace.c (print_program_space): Likewise. * python/py-breakpoint.c (bppy_get_commands): Likewise. * python/py-framefilter.c (py_print_type): Likewise. (py_print_value): Likewise. (py_print_single_arg): Likewise. (enumerate_args): Likewise. (enumerate_locals): Likewise. (py_print_args): Likewise. (py_print_frame): Likewise. * record-btrace.c (btrace_ui_out_decode_error): Likewise. (btrace_call_history_insn_range): Likewise. (btrace_call_history_src_line): Likewise. (btrace_call_history): Likewise. * remote.c (show_remote_cmd): Likewise. * skip.c (skip_info): Likewise. * solib.c (info_sharedlibrary_command): Likewise. * source.c (print_source_lines_base): Likewise. * spu-tdep.c (info_spu_event_command): Likewise. (info_spu_signal_command): Likewise. (info_spu_mailbox_list): Likewise. (info_spu_dma_cmdlist): Likewise. (info_spu_dma_command): Likewise. (info_spu_proxydma_command): Likewise. * stack.c (print_stack_frame): Likewise. (print_frame_arg): Likewise. (read_frame_arg): Likewise. (print_frame_args): Likewise. (print_frame_info): Likewise. (print_frame): Likewise. * symfile.c (load_progress): Likewise. (generic_load): Likewise. (print_transfer_performance): Likewise. * thread.c (do_captured_list_thread_ids): Likewise. (print_thread_info_1): Likewise. (restore_selected_frame): Likewise. (do_captured_thread_select): Likewise. (print_selected_thread_frame): Likewise. * top.c (execute_command_to_string): Likewise. * tracepoint.c (tvariables_info_1): Likewise. (trace_status_mi): Likewise. (tfind_1): Likewise. (print_one_static_tracepoint_marker): Likewise. (info_static_tracepoint_markers_command): Likewise. * utils.c (do_ui_out_redirect_pop): Likewise. (fputs_maybe_filtered): Likewise.	2016-12-22 16:19:42 -05:00
Joel Brobecker	618f726fcb	GDB copyright headers update after running GDB's copyright.py script. gdb/ChangeLog: Update year range in copyright notice of all files.	2016-01-01 08:43:22 +04:00
Doug Evans	4d6cceb4e4	PR mi/18833 gdb.execute ("set param value", to_string=True) will crash gdb if using MI gdb/ChangeLog: * cli/cli-logging.c (pop_output_files): Don't restore redirection if MI-like. * mi/mi-out.c: #include "vec.h". (ui_filep): New type. (DEV_VEC_P (ui_filep)): New type. (struct ui_out_data) <buffer, original_buffer>: Delete. (struct ui_out_data) <streams>: New member. (mi_ui_out_impl): Add data_destroy field. (mi_field_string, mi_field_fmt): Update. (mi_flush, mi_redirect, field_separator): Update. (mi_open, mi_close): Update. (mi_out_buffered, mi_out_rewind, mi_out_put): Update. (mi_out_data_ctor, mi_out_data_dtor): New functions. (mi_out_new): Call mi_out_data_ctor. testsuite/gdb/ChangeLog: * lib/gdb.exp (skip_python_tests_prompt): Renamed from skip_python_tests. New arg prompt_regexp. (skip_python_tests): New function. * lib/mi-support.exp (mi_skip_python_tests): New function. * gdb.python/py-mi-objfile-gdb.py: New file. * gdb.python/py-mi-objfile.c: New file. * gdb.python/py-mi-objfile.exp: New file.	2015-08-18 14:02:03 -07:00
Joel Brobecker	32d0add0a6	Update year range in copyright notice of all files owned by the GDB project. gdb/ChangeLog: Update year range in copyright notice of all files.	2015-01-01 13:32:14 +04:00
Gary Benson	6d3d12ebef	Include string.h in common-defs.h This commit includes string.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include string.h. * aarch64-tdep.c: Do not include string.h. * ada-exp.y: Likewise. * ada-lang.c: Likewise. * ada-lex.l: Likewise. * ada-typeprint.c: Likewise. * ada-valprint.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alpha-nat.c: Likewise. * alpha-osf1-tdep.c: Likewise. * alpha-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-dicos-tdep.c: Likewise. * amd64-linux-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-sol2-tdep.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-linux-nat.c: Likewise. * arm-linux-tdep.c: Likewise. * arm-tdep.c: Likewise. * arm-wince-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * armnbsd-nat.c: Likewise. * armnbsd-tdep.c: Likewise. * armobsd-tdep.c: Likewise. * avr-tdep.c: Likewise. * ax-gdb.c: Likewise. * ax-general.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * breakpoint.c: Likewise. * build-id.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * c-typeprint.c: Likewise. * c-valprint.c: Likewise. * charset.c: Likewise. * cli-out.c: Likewise. * cli/cli-cmds.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-interp.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-setshow.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/agent.c: Likewise. * common/buffer.c: Likewise. * common/buffer.h: Likewise. * common/common-utils.c: Likewise. * common/filestuff.c: Likewise. * common/filestuff.c: Likewise. * common/format.c: Likewise. * common/print-utils.c: Likewise. * common/rsp-low.c: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * common/xml-utils.c: Likewise. * core-regset.c: Likewise. * corefile.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-support.c: Likewise. * cp-valprint.c: Likewise. * cris-tdep.c: Likewise. * d-exp.y: Likewise. * darwin-nat.c: Likewise. * dbxread.c: Likewise. * dcache.c: Likewise. * demangle.c: Likewise. * dicos-tdep.c: Likewise. * disasm.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * elfread.c: Likewise. * environ.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * exec.c: Likewise. * expprint.c: Likewise. * f-exp.y: Likewise. * f-lang.c: Likewise. * f-typeprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findcmd.c: Likewise. * findvar.c: Likewise. * fork-child.c: Likewise. * frame.c: Likewise. * frv-linux-tdep.c: Likewise. * frv-tdep.c: Likewise. * gdb.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v2-abi.c: Likewise. * gnu-v3-abi.c: Likewise. * go-exp.y: Likewise. * go-lang.c: Likewise. * go32-nat.c: Likewise. * guile/guile.c: Likewise. * guile/scm-auto-load.c: Likewise. * hppa-hpux-tdep.c: Likewise. * hppa-linux-nat.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-cygwin-tdep.c: Likewise. * i386-dicos-tdep.c: Likewise. * i386-linux-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-sol2-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-linux-nat.c: Likewise. * inf-child.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * inflow.c: Likewise. * infrun.c: Likewise. * interps.c: Likewise. * iq2000-tdep.c: Likewise. * irix5-nat.c: Likewise. * jv-exp.y: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * jv-valprint.c: Likewise. * language.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * lm32-tdep.c: Likewise. * m2-exp.y: Likewise. * m2-typeprint.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-linux-tdep.c: Likewise. * m32r-rom.c: Likewise. * m32r-tdep.c: Likewise. * m68hc11-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-tdep.c: Likewise. * m68klinux-nat.c: Likewise. * m68klinux-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macrocmd.c: Likewise. * main.c: Likewise. * mdebugread.c: Likewise. * mem-break.c: Likewise. * memattr.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-cmd-break.c: Likewise. * mi/mi-cmd-disas.c: Likewise. * mi/mi-cmd-env.c: Likewise. * mi/mi-cmd-stack.c: Likewise. * mi/mi-cmd-var.c: Likewise. * mi/mi-cmds.c: Likewise. * mi/mi-console.c: Likewise. * mi/mi-getopt.c: Likewise. * mi/mi-interp.c: Likewise. * mi/mi-main.c: Likewise. * mi/mi-parse.c: Likewise. * microblaze-rom.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * minidebug.c: Likewise. * minsyms.c: Likewise. * mips-irix-tdep.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mipsread.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * monitor.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-procfs.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/linux-waitpid.c: Likewise. * nbsd-tdep.c: Likewise. * nios2-linux-tdep.c: Likewise. * nto-procfs.c: Likewise. * nto-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * osdata.c: Likewise. * p-exp.y: Likewise. * p-lang.c: Likewise. * p-typeprint.c: Likewise. * parse.c: Likewise. * posix-hdep.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * python/py-auto-load.c: Likewise. * python/py-gdb-readline.c: Likewise. * ravenscar-thread.c: Likewise. * regcache.c: Likewise. * registry.c: Likewise. * remote-fileio.c: Likewise. * remote-m32r-sdi.c: Likewise. * remote-mips.c: Likewise. * remote-notif.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * reverse.c: Likewise. * rs6000-aix-tdep.c: Likewise. * ser-base.c: Likewise. * ser-go32.c: Likewise. * ser-mingw.c: Likewise. * ser-pipe.c: Likewise. * ser-tcp.c: Likewise. * ser-unix.c: Likewise. * serial.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * shnbsd-tdep.c: Likewise. * skip.c: Likewise. * sol-thread.c: Likewise. * solib-dsbt.c: Likewise. * solib-frv.c: Likewise. * solib-osf.c: Likewise. * solib-som.c: Likewise. * solib-spu.c: Likewise. * solib-target.c: Likewise. * solib.c: Likewise. * somread.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * spu-linux-nat.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * std-regs.c: Likewise. * symfile.c: Likewise. * symmisc.c: Likewise. * symtab.c: Likewise. * target.c: Likewise. * thread.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tracepoint.c: Likewise. * tui/tui-command.c: Likewise. * tui/tui-data.c: Likewise. * tui/tui-disasm.c: Likewise. * tui/tui-file.c: Likewise. * tui/tui-layout.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-regs.c: Likewise. * tui/tui-source.c: Likewise. * tui/tui-stack.c: Likewise. * tui/tui-win.c: Likewise. * tui/tui-windata.c: Likewise. * tui/tui-winsource.c: Likewise. * typeprint.c: Likewise. * ui-file.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valarith.c: Likewise. * valops.c: Likewise. * valprint.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-tdep.c: Likewise. * vaxnbsd-tdep.c: Likewise. * vaxobsd-tdep.c: Likewise. * windows-nat.c: Likewise. * xcoffread.c: Likewise. * xml-support.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include string.h. * event-loop.c: Likewise. * linux-low.c: Likewise. * regcache.c: Likewise. * remote-utils.c: Likewise. * spu-low.c: Likewise. * utils.c: Likewise.	2014-08-07 09:06:47 +01:00
Gary Benson	dccbb60975	Include gdb_assert.h in common-defs.h This commit includes gdb_assert.h in common-defs.h and removes all other inclusions. gdb/ 2014-08-07 Gary Benson <gbenson@redhat.com> * common/common-defs.h: Include gdb_assert.h. * aarch64-tdep.c: Do not include gdb_assert.h. * addrmap.c: Likewise. * aix-thread.c: Likewise. * alpha-linux-tdep.c: Likewise. * alpha-mdebug-tdep.c: Likewise. * alphanbsd-tdep.c: Likewise. * amd64-nat.c: Likewise. * amd64-tdep.c: Likewise. * amd64bsd-nat.c: Likewise. * amd64fbsd-nat.c: Likewise. * amd64fbsd-tdep.c: Likewise. * amd64nbsd-nat.c: Likewise. * amd64nbsd-tdep.c: Likewise. * amd64obsd-nat.c: Likewise. * amd64obsd-tdep.c: Likewise. * arch-utils.c: Likewise. * arm-tdep.c: Likewise. * armbsd-tdep.c: Likewise. * auxv.c: Likewise. * bcache.c: Likewise. * bfin-tdep.c: Likewise. * blockframe.c: Likewise. * breakpoint.c: Likewise. * bsd-kvm.c: Likewise. * bsd-uthread.c: Likewise. * buildsym.c: Likewise. * c-exp.y: Likewise. * c-lang.c: Likewise. * charset.c: Likewise. * cleanups.c: Likewise. * cli-out.c: Likewise. * cli/cli-decode.c: Likewise. * cli/cli-dump.c: Likewise. * cli/cli-logging.c: Likewise. * cli/cli-script.c: Likewise. * cli/cli-utils.c: Likewise. * coffread.c: Likewise. * common/common-utils.c: Likewise. * common/queue.h: Likewise. * common/signals.c: Likewise. * common/vec.h: Likewise. * complaints.c: Likewise. * completer.c: Likewise. * corelow.c: Likewise. * cp-abi.c: Likewise. * cp-name-parser.y: Likewise. * cp-namespace.c: Likewise. * cp-support.c: Likewise. * cris-tdep.c: Likewise. * dbxread.c: Likewise. * dictionary.c: Likewise. * doublest.c: Likewise. * dsrec.c: Likewise. * dummy-frame.c: Likewise. * dwarf2-frame-tailcall.c: Likewise. * dwarf2-frame.c: Likewise. * dwarf2expr.c: Likewise. * dwarf2loc.c: Likewise. * dwarf2read.c: Likewise. * eval.c: Likewise. * event-loop.c: Likewise. * exceptions.c: Likewise. * expprint.c: Likewise. * f-valprint.c: Likewise. * fbsd-nat.c: Likewise. * findvar.c: Likewise. * frame-unwind.c: Likewise. * frame.c: Likewise. * frv-tdep.c: Likewise. * gcore.c: Likewise. * gdb-dlfcn.c: Likewise. * gdb_bfd.c: Likewise. * gdbarch.c: Likewise. * gdbarch.sh: Likewise. * gdbtypes.c: Likewise. * gnu-nat.c: Likewise. * gnu-v3-abi.c: Likewise. * go-lang.c: Likewise. * guile/scm-exception.c: Likewise. * guile/scm-gsmob.c: Likewise. * guile/scm-lazy-string.c: Likewise. * guile/scm-math.c: Likewise. * guile/scm-pretty-print.c: Likewise. * guile/scm-safe-call.c: Likewise. * guile/scm-utils.c: Likewise. * guile/scm-value.c: Likewise. * h8300-tdep.c: Likewise. * hppa-hpux-nat.c: Likewise. * hppa-tdep.c: Likewise. * hppanbsd-tdep.c: Likewise. * hppaobsd-tdep.c: Likewise. * i386-darwin-nat.c: Likewise. * i386-darwin-tdep.c: Likewise. * i386-nto-tdep.c: Likewise. * i386-tdep.c: Likewise. * i386bsd-nat.c: Likewise. * i386fbsd-tdep.c: Likewise. * i386gnu-nat.c: Likewise. * i386nbsd-tdep.c: Likewise. * i386obsd-tdep.c: Likewise. * i387-tdep.c: Likewise. * ia64-libunwind-tdep.c: Likewise. * ia64-tdep.c: Likewise. * inf-ptrace.c: Likewise. * inf-ttrace.c: Likewise. * infcall.c: Likewise. * infcmd.c: Likewise. * infrun.c: Likewise. * inline-frame.c: Likewise. * interps.c: Likewise. * jv-lang.c: Likewise. * jv-typeprint.c: Likewise. * linux-fork.c: Likewise. * linux-nat.c: Likewise. * linux-thread-db.c: Likewise. * m32c-tdep.c: Likewise. * m32r-linux-nat.c: Likewise. * m32r-tdep.c: Likewise. * m68k-tdep.c: Likewise. * m68kbsd-nat.c: Likewise. * m68kbsd-tdep.c: Likewise. * m88k-tdep.c: Likewise. * machoread.c: Likewise. * macroexp.c: Likewise. * macrotab.c: Likewise. * maint.c: Likewise. * mdebugread.c: Likewise. * memory-map.c: Likewise. * mep-tdep.c: Likewise. * mi/mi-common.c: Likewise. * microblaze-tdep.c: Likewise. * mingw-hdep.c: Likewise. * mips-linux-nat.c: Likewise. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. * mips64obsd-tdep.c: Likewise. * mipsnbsd-tdep.c: Likewise. * mn10300-linux-tdep.c: Likewise. * mn10300-tdep.c: Likewise. * moxie-tdep.c: Likewise. * mt-tdep.c: Likewise. * nat/linux-btrace.c: Likewise. * nat/linux-osdata.c: Likewise. * nat/linux-ptrace.c: Likewise. * nat/mips-linux-watch.c: Likewise. * nios2-linux-tdep.c: Likewise. * nios2-tdep.c: Likewise. * objc-lang.c: Likewise. * objfiles.c: Likewise. * obsd-nat.c: Likewise. * opencl-lang.c: Likewise. * osabi.c: Likewise. * parse.c: Likewise. * ppc-linux-nat.c: Likewise. * ppc-sysv-tdep.c: Likewise. * ppcfbsd-nat.c: Likewise. * ppcfbsd-tdep.c: Likewise. * ppcnbsd-nat.c: Likewise. * ppcnbsd-tdep.c: Likewise. * ppcobsd-nat.c: Likewise. * ppcobsd-tdep.c: Likewise. * printcmd.c: Likewise. * procfs.c: Likewise. * prologue-value.c: Likewise. * psymtab.c: Likewise. * python/py-lazy-string.c: Likewise. * python/py-value.c: Likewise. * regcache.c: Likewise. * reggroups.c: Likewise. * registry.c: Likewise. * remote-sim.c: Likewise. * remote.c: Likewise. * rs6000-aix-tdep.c: Likewise. * rs6000-tdep.c: Likewise. * s390-linux-tdep.c: Likewise. * score-tdep.c: Likewise. * ser-base.c: Likewise. * ser-mingw.c: Likewise. * sh-tdep.c: Likewise. * sh64-tdep.c: Likewise. * solib-darwin.c: Likewise. * solib-spu.c: Likewise. * solib-svr4.c: Likewise. * source.c: Likewise. * sparc-nat.c: Likewise. * sparc-sol2-tdep.c: Likewise. * sparc-tdep.c: Likewise. * sparc64-sol2-tdep.c: Likewise. * sparc64-tdep.c: Likewise. * sparc64fbsd-tdep.c: Likewise. * sparc64nbsd-tdep.c: Likewise. * sparc64obsd-tdep.c: Likewise. * sparcnbsd-tdep.c: Likewise. * sparcobsd-tdep.c: Likewise. * spu-multiarch.c: Likewise. * spu-tdep.c: Likewise. * stabsread.c: Likewise. * stack.c: Likewise. * symfile.c: Likewise. * symtab.c: Likewise. * target-descriptions.c: Likewise. * target-memory.c: Likewise. * target.c: Likewise. * tic6x-linux-tdep.c: Likewise. * tic6x-tdep.c: Likewise. * tilegx-linux-nat.c: Likewise. * tilegx-tdep.c: Likewise. * top.c: Likewise. * tramp-frame.c: Likewise. * tui/tui-out.c: Likewise. * tui/tui-winsource.c: Likewise. * ui-out.c: Likewise. * user-regs.c: Likewise. * utils.c: Likewise. * v850-tdep.c: Likewise. * valops.c: Likewise. * value.c: Likewise. * varobj.c: Likewise. * vax-nat.c: Likewise. * xml-syscall.c: Likewise. * xml-tdesc.c: Likewise. * xstormy16-tdep.c: Likewise. * xtensa-linux-nat.c: Likewise. * xtensa-tdep.c: Likewise. gdb/gdbserver/ 2014-08-07 Gary Benson <gbenson@redhat.com> * server.h: Do not include gdb_assert.h.	2014-08-07 09:06:45 +01:00
Marc Khouzam	4a5be5ee68	Assign 'targerr' instead of 'targ' to gdb_stdtargerr.	2014-07-03 14:57:33 -04:00
Joel Brobecker	ecd75fc8ee	Update Copyright year range in all files maintained by GDB.	2014-01-01 07:54:24 +04:00
Tom Tromey	0e9f083f4c	remove gdb_string.h This removes gdb_string.h. This patch is purely mechanical. I created it by running the two commands: git rm common/gdb_string.h perl -pi -e's/"gdb_string.h"/<string.h>/;' .[chyl] /.[chyl] 2013-11-18 Tom Tromey <tromey@redhat.com> common/gdb_string.h: Remove. * aarch64-tdep.c: Use string.h, not gdb_string.h. * ada-exp.y: Use string.h, not gdb_string.h. * ada-lang.c: Use string.h, not gdb_string.h. * ada-lex.l: Use string.h, not gdb_string.h. * ada-typeprint.c: Use string.h, not gdb_string.h. * ada-valprint.c: Use string.h, not gdb_string.h. * aix-thread.c: Use string.h, not gdb_string.h. * alpha-linux-tdep.c: Use string.h, not gdb_string.h. * alpha-mdebug-tdep.c: Use string.h, not gdb_string.h. * alpha-nat.c: Use string.h, not gdb_string.h. * alpha-osf1-tdep.c: Use string.h, not gdb_string.h. * alpha-tdep.c: Use string.h, not gdb_string.h. * alphanbsd-tdep.c: Use string.h, not gdb_string.h. * amd64-dicos-tdep.c: Use string.h, not gdb_string.h. * amd64-linux-nat.c: Use string.h, not gdb_string.h. * amd64-linux-tdep.c: Use string.h, not gdb_string.h. * amd64-nat.c: Use string.h, not gdb_string.h. * amd64-sol2-tdep.c: Use string.h, not gdb_string.h. * amd64fbsd-tdep.c: Use string.h, not gdb_string.h. * amd64obsd-tdep.c: Use string.h, not gdb_string.h. * arch-utils.c: Use string.h, not gdb_string.h. * arm-linux-nat.c: Use string.h, not gdb_string.h. * arm-linux-tdep.c: Use string.h, not gdb_string.h. * arm-tdep.c: Use string.h, not gdb_string.h. * arm-wince-tdep.c: Use string.h, not gdb_string.h. * armbsd-tdep.c: Use string.h, not gdb_string.h. * armnbsd-nat.c: Use string.h, not gdb_string.h. * armnbsd-tdep.c: Use string.h, not gdb_string.h. * armobsd-tdep.c: Use string.h, not gdb_string.h. * avr-tdep.c: Use string.h, not gdb_string.h. * ax-gdb.c: Use string.h, not gdb_string.h. * ax-general.c: Use string.h, not gdb_string.h. * bcache.c: Use string.h, not gdb_string.h. * bfin-tdep.c: Use string.h, not gdb_string.h. * breakpoint.c: Use string.h, not gdb_string.h. * build-id.c: Use string.h, not gdb_string.h. * buildsym.c: Use string.h, not gdb_string.h. * c-exp.y: Use string.h, not gdb_string.h. * c-lang.c: Use string.h, not gdb_string.h. * c-typeprint.c: Use string.h, not gdb_string.h. * c-valprint.c: Use string.h, not gdb_string.h. * charset.c: Use string.h, not gdb_string.h. * cli-out.c: Use string.h, not gdb_string.h. * cli/cli-cmds.c: Use string.h, not gdb_string.h. * cli/cli-decode.c: Use string.h, not gdb_string.h. * cli/cli-dump.c: Use string.h, not gdb_string.h. * cli/cli-interp.c: Use string.h, not gdb_string.h. * cli/cli-logging.c: Use string.h, not gdb_string.h. * cli/cli-script.c: Use string.h, not gdb_string.h. * cli/cli-setshow.c: Use string.h, not gdb_string.h. * cli/cli-utils.c: Use string.h, not gdb_string.h. * coffread.c: Use string.h, not gdb_string.h. * common/common-utils.c: Use string.h, not gdb_string.h. * common/filestuff.c: Use string.h, not gdb_string.h. * common/linux-procfs.c: Use string.h, not gdb_string.h. * common/linux-ptrace.c: Use string.h, not gdb_string.h. * common/signals.c: Use string.h, not gdb_string.h. * common/vec.h: Use string.h, not gdb_string.h. * core-regset.c: Use string.h, not gdb_string.h. * corefile.c: Use string.h, not gdb_string.h. * corelow.c: Use string.h, not gdb_string.h. * cp-abi.c: Use string.h, not gdb_string.h. * cp-support.c: Use string.h, not gdb_string.h. * cp-valprint.c: Use string.h, not gdb_string.h. * cris-tdep.c: Use string.h, not gdb_string.h. * d-lang.c: Use string.h, not gdb_string.h. * dbxread.c: Use string.h, not gdb_string.h. * dcache.c: Use string.h, not gdb_string.h. * demangle.c: Use string.h, not gdb_string.h. * dicos-tdep.c: Use string.h, not gdb_string.h. * disasm.c: Use string.h, not gdb_string.h. * doublest.c: Use string.h, not gdb_string.h. * dsrec.c: Use string.h, not gdb_string.h. * dummy-frame.c: Use string.h, not gdb_string.h. * dwarf2-frame.c: Use string.h, not gdb_string.h. * dwarf2loc.c: Use string.h, not gdb_string.h. * dwarf2read.c: Use string.h, not gdb_string.h. * elfread.c: Use string.h, not gdb_string.h. * environ.c: Use string.h, not gdb_string.h. * eval.c: Use string.h, not gdb_string.h. * event-loop.c: Use string.h, not gdb_string.h. * exceptions.c: Use string.h, not gdb_string.h. * exec.c: Use string.h, not gdb_string.h. * expprint.c: Use string.h, not gdb_string.h. * f-exp.y: Use string.h, not gdb_string.h. * f-lang.c: Use string.h, not gdb_string.h. * f-typeprint.c: Use string.h, not gdb_string.h. * f-valprint.c: Use string.h, not gdb_string.h. * fbsd-nat.c: Use string.h, not gdb_string.h. * findcmd.c: Use string.h, not gdb_string.h. * findvar.c: Use string.h, not gdb_string.h. * fork-child.c: Use string.h, not gdb_string.h. * frame.c: Use string.h, not gdb_string.h. * frv-linux-tdep.c: Use string.h, not gdb_string.h. * frv-tdep.c: Use string.h, not gdb_string.h. * gdb.c: Use string.h, not gdb_string.h. * gdb_bfd.c: Use string.h, not gdb_string.h. * gdbarch.c: Use string.h, not gdb_string.h. * gdbtypes.c: Use string.h, not gdb_string.h. * gnu-nat.c: Use string.h, not gdb_string.h. * gnu-v2-abi.c: Use string.h, not gdb_string.h. * gnu-v3-abi.c: Use string.h, not gdb_string.h. * go-exp.y: Use string.h, not gdb_string.h. * go-lang.c: Use string.h, not gdb_string.h. * go32-nat.c: Use string.h, not gdb_string.h. * hppa-hpux-tdep.c: Use string.h, not gdb_string.h. * hppa-linux-nat.c: Use string.h, not gdb_string.h. * hppanbsd-tdep.c: Use string.h, not gdb_string.h. * hppaobsd-tdep.c: Use string.h, not gdb_string.h. * i386-cygwin-tdep.c: Use string.h, not gdb_string.h. * i386-dicos-tdep.c: Use string.h, not gdb_string.h. * i386-linux-nat.c: Use string.h, not gdb_string.h. * i386-linux-tdep.c: Use string.h, not gdb_string.h. * i386-nto-tdep.c: Use string.h, not gdb_string.h. * i386-sol2-tdep.c: Use string.h, not gdb_string.h. * i386-tdep.c: Use string.h, not gdb_string.h. * i386bsd-tdep.c: Use string.h, not gdb_string.h. * i386gnu-nat.c: Use string.h, not gdb_string.h. * i386nbsd-tdep.c: Use string.h, not gdb_string.h. * i386obsd-tdep.c: Use string.h, not gdb_string.h. * i387-tdep.c: Use string.h, not gdb_string.h. * ia64-libunwind-tdep.c: Use string.h, not gdb_string.h. * ia64-linux-nat.c: Use string.h, not gdb_string.h. * inf-child.c: Use string.h, not gdb_string.h. * inf-ptrace.c: Use string.h, not gdb_string.h. * inf-ttrace.c: Use string.h, not gdb_string.h. * infcall.c: Use string.h, not gdb_string.h. * infcmd.c: Use string.h, not gdb_string.h. * inflow.c: Use string.h, not gdb_string.h. * infrun.c: Use string.h, not gdb_string.h. * interps.c: Use string.h, not gdb_string.h. * iq2000-tdep.c: Use string.h, not gdb_string.h. * irix5-nat.c: Use string.h, not gdb_string.h. * jv-exp.y: Use string.h, not gdb_string.h. * jv-lang.c: Use string.h, not gdb_string.h. * jv-typeprint.c: Use string.h, not gdb_string.h. * jv-valprint.c: Use string.h, not gdb_string.h. * language.c: Use string.h, not gdb_string.h. * linux-fork.c: Use string.h, not gdb_string.h. * linux-nat.c: Use string.h, not gdb_string.h. * lm32-tdep.c: Use string.h, not gdb_string.h. * m2-exp.y: Use string.h, not gdb_string.h. * m2-typeprint.c: Use string.h, not gdb_string.h. * m32c-tdep.c: Use string.h, not gdb_string.h. * m32r-linux-nat.c: Use string.h, not gdb_string.h. * m32r-linux-tdep.c: Use string.h, not gdb_string.h. * m32r-rom.c: Use string.h, not gdb_string.h. * m32r-tdep.c: Use string.h, not gdb_string.h. * m68hc11-tdep.c: Use string.h, not gdb_string.h. * m68k-tdep.c: Use string.h, not gdb_string.h. * m68kbsd-tdep.c: Use string.h, not gdb_string.h. * m68klinux-nat.c: Use string.h, not gdb_string.h. * m68klinux-tdep.c: Use string.h, not gdb_string.h. * m88k-tdep.c: Use string.h, not gdb_string.h. * macrocmd.c: Use string.h, not gdb_string.h. * main.c: Use string.h, not gdb_string.h. * mdebugread.c: Use string.h, not gdb_string.h. * mem-break.c: Use string.h, not gdb_string.h. * memattr.c: Use string.h, not gdb_string.h. * memory-map.c: Use string.h, not gdb_string.h. * mep-tdep.c: Use string.h, not gdb_string.h. * mi/mi-cmd-break.c: Use string.h, not gdb_string.h. * mi/mi-cmd-disas.c: Use string.h, not gdb_string.h. * mi/mi-cmd-env.c: Use string.h, not gdb_string.h. * mi/mi-cmd-stack.c: Use string.h, not gdb_string.h. * mi/mi-cmd-var.c: Use string.h, not gdb_string.h. * mi/mi-cmds.c: Use string.h, not gdb_string.h. * mi/mi-console.c: Use string.h, not gdb_string.h. * mi/mi-getopt.c: Use string.h, not gdb_string.h. * mi/mi-interp.c: Use string.h, not gdb_string.h. * mi/mi-main.c: Use string.h, not gdb_string.h. * mi/mi-parse.c: Use string.h, not gdb_string.h. * microblaze-rom.c: Use string.h, not gdb_string.h. * microblaze-tdep.c: Use string.h, not gdb_string.h. * mingw-hdep.c: Use string.h, not gdb_string.h. * minidebug.c: Use string.h, not gdb_string.h. * minsyms.c: Use string.h, not gdb_string.h. * mips-irix-tdep.c: Use string.h, not gdb_string.h. * mips-linux-tdep.c: Use string.h, not gdb_string.h. * mips-tdep.c: Use string.h, not gdb_string.h. * mips64obsd-tdep.c: Use string.h, not gdb_string.h. * mipsnbsd-tdep.c: Use string.h, not gdb_string.h. * mipsread.c: Use string.h, not gdb_string.h. * mn10300-linux-tdep.c: Use string.h, not gdb_string.h. * mn10300-tdep.c: Use string.h, not gdb_string.h. * monitor.c: Use string.h, not gdb_string.h. * moxie-tdep.c: Use string.h, not gdb_string.h. * mt-tdep.c: Use string.h, not gdb_string.h. * nbsd-tdep.c: Use string.h, not gdb_string.h. * nios2-linux-tdep.c: Use string.h, not gdb_string.h. * nto-procfs.c: Use string.h, not gdb_string.h. * nto-tdep.c: Use string.h, not gdb_string.h. * objc-lang.c: Use string.h, not gdb_string.h. * objfiles.c: Use string.h, not gdb_string.h. * opencl-lang.c: Use string.h, not gdb_string.h. * osabi.c: Use string.h, not gdb_string.h. * osdata.c: Use string.h, not gdb_string.h. * p-exp.y: Use string.h, not gdb_string.h. * p-lang.c: Use string.h, not gdb_string.h. * p-typeprint.c: Use string.h, not gdb_string.h. * parse.c: Use string.h, not gdb_string.h. * posix-hdep.c: Use string.h, not gdb_string.h. * ppc-linux-nat.c: Use string.h, not gdb_string.h. * ppc-sysv-tdep.c: Use string.h, not gdb_string.h. * ppcfbsd-tdep.c: Use string.h, not gdb_string.h. * ppcnbsd-tdep.c: Use string.h, not gdb_string.h. * ppcobsd-tdep.c: Use string.h, not gdb_string.h. * printcmd.c: Use string.h, not gdb_string.h. * procfs.c: Use string.h, not gdb_string.h. * prologue-value.c: Use string.h, not gdb_string.h. * python/py-auto-load.c: Use string.h, not gdb_string.h. * python/py-gdb-readline.c: Use string.h, not gdb_string.h. * ravenscar-thread.c: Use string.h, not gdb_string.h. * regcache.c: Use string.h, not gdb_string.h. * registry.c: Use string.h, not gdb_string.h. * remote-fileio.c: Use string.h, not gdb_string.h. * remote-m32r-sdi.c: Use string.h, not gdb_string.h. * remote-mips.c: Use string.h, not gdb_string.h. * remote-sim.c: Use string.h, not gdb_string.h. * remote.c: Use string.h, not gdb_string.h. * reverse.c: Use string.h, not gdb_string.h. * rs6000-aix-tdep.c: Use string.h, not gdb_string.h. * ser-base.c: Use string.h, not gdb_string.h. * ser-go32.c: Use string.h, not gdb_string.h. * ser-mingw.c: Use string.h, not gdb_string.h. * ser-pipe.c: Use string.h, not gdb_string.h. * ser-tcp.c: Use string.h, not gdb_string.h. * ser-unix.c: Use string.h, not gdb_string.h. * serial.c: Use string.h, not gdb_string.h. * sh-tdep.c: Use string.h, not gdb_string.h. * sh64-tdep.c: Use string.h, not gdb_string.h. * shnbsd-tdep.c: Use string.h, not gdb_string.h. * skip.c: Use string.h, not gdb_string.h. * sol-thread.c: Use string.h, not gdb_string.h. * solib-dsbt.c: Use string.h, not gdb_string.h. * solib-frv.c: Use string.h, not gdb_string.h. * solib-osf.c: Use string.h, not gdb_string.h. * solib-spu.c: Use string.h, not gdb_string.h. * solib-target.c: Use string.h, not gdb_string.h. * solib.c: Use string.h, not gdb_string.h. * somread.c: Use string.h, not gdb_string.h. * source.c: Use string.h, not gdb_string.h. * sparc-nat.c: Use string.h, not gdb_string.h. * sparc-sol2-tdep.c: Use string.h, not gdb_string.h. * sparc-tdep.c: Use string.h, not gdb_string.h. * sparc64-tdep.c: Use string.h, not gdb_string.h. * sparc64fbsd-tdep.c: Use string.h, not gdb_string.h. * sparc64nbsd-tdep.c: Use string.h, not gdb_string.h. * sparcnbsd-tdep.c: Use string.h, not gdb_string.h. * spu-linux-nat.c: Use string.h, not gdb_string.h. * spu-multiarch.c: Use string.h, not gdb_string.h. * spu-tdep.c: Use string.h, not gdb_string.h. * stabsread.c: Use string.h, not gdb_string.h. * stack.c: Use string.h, not gdb_string.h. * std-regs.c: Use string.h, not gdb_string.h. * symfile.c: Use string.h, not gdb_string.h. * symmisc.c: Use string.h, not gdb_string.h. * symtab.c: Use string.h, not gdb_string.h. * target.c: Use string.h, not gdb_string.h. * thread.c: Use string.h, not gdb_string.h. * tilegx-linux-nat.c: Use string.h, not gdb_string.h. * tilegx-tdep.c: Use string.h, not gdb_string.h. * top.c: Use string.h, not gdb_string.h. * tracepoint.c: Use string.h, not gdb_string.h. * tui/tui-command.c: Use string.h, not gdb_string.h. * tui/tui-data.c: Use string.h, not gdb_string.h. * tui/tui-disasm.c: Use string.h, not gdb_string.h. * tui/tui-file.c: Use string.h, not gdb_string.h. * tui/tui-layout.c: Use string.h, not gdb_string.h. * tui/tui-out.c: Use string.h, not gdb_string.h. * tui/tui-regs.c: Use string.h, not gdb_string.h. * tui/tui-source.c: Use string.h, not gdb_string.h. * tui/tui-stack.c: Use string.h, not gdb_string.h. * tui/tui-win.c: Use string.h, not gdb_string.h. * tui/tui-windata.c: Use string.h, not gdb_string.h. * tui/tui-winsource.c: Use string.h, not gdb_string.h. * typeprint.c: Use string.h, not gdb_string.h. * ui-file.c: Use string.h, not gdb_string.h. * ui-out.c: Use string.h, not gdb_string.h. * user-regs.c: Use string.h, not gdb_string.h. * utils.c: Use string.h, not gdb_string.h. * v850-tdep.c: Use string.h, not gdb_string.h. * valarith.c: Use string.h, not gdb_string.h. * valops.c: Use string.h, not gdb_string.h. * valprint.c: Use string.h, not gdb_string.h. * value.c: Use string.h, not gdb_string.h. * varobj.c: Use string.h, not gdb_string.h. * vax-tdep.c: Use string.h, not gdb_string.h. * vaxnbsd-tdep.c: Use string.h, not gdb_string.h. * vaxobsd-tdep.c: Use string.h, not gdb_string.h. * windows-nat.c: Use string.h, not gdb_string.h. * xcoffread.c: Use string.h, not gdb_string.h. * xml-support.c: Use string.h, not gdb_string.h. * xstormy16-tdep.c: Use string.h, not gdb_string.h. * xtensa-linux-nat.c: Use string.h, not gdb_string.h.	2013-11-18 13:29:00 -07:00
Tom Tromey	e12fefc804	simplify cli-logging.c for analysis This is another stylistic patch. It changes cli-logging.c to be analyzable by the checker, again following the method of adding an outer cleanup and unconditionally calling do_cleanups. * cli/cli-logging.c (set_logging_redirect): Unconditionally call do_cleanups.	2013-05-30 17:13:19 +00:00
Pedro Alves	0b1afbb37b	Consistent use of (C) after "Copyright". While writing the previous patch, I noticed that we're not consistent with the (C) in the copyright header. The maintainers manual prefers having it, though also says it's optional. We have over 10x more files with (C) than without in gdb's code, so I spent a few minutes grepping and fixing. Funny enough, the testsuite has it backwards. I'll leave that for another time. gdb/ 2013-02-12 Pedro Alves <palves@redhat.com> * amd64-darwin-tdep.c: Add (C) after Copyright. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. * cli/cli-decode.h: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-dump.h: Ditto. * cli/cli-interp.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-script.h: Ditto. * cli/cli-setshow.c: Ditto. * cli/cli-setshow.h: Ditto. * cli/cli-utils.c: Ditto. * cli/cli-utils.h: Ditto. * config/alpha/nm-osf3.h: Ditto. * config/djgpp/djconfig.sh: Ditto. * config/i386/nm-fbsd.h: Ditto. * config/i386/nm-i386gnu.h: Ditto. * config/nm-linux.h: Ditto. * config/nm-nto.h: Ditto. * config/rs6000/nm-rs6000.h: Ditto. * config/sparc/nm-sol2.h: Ditto. * darwin-nat-info.c: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * gdb-demangle.h: Ditto. * i386-darwin-nat.c: Ditto. * i386-darwin-tdep.c: Ditto. * linux-fork.h: Ditto. * m32c-tdep.c: Ditto. * microblaze-linux-tdep.c: Ditto. * microblaze-rom.c: Ditto. * microblaze-tdep.c: Ditto. * microblaze-tdep.h: Ditto. * mips-linux-tdep.h: Ditto. * ppc-ravenscar-thread.c: Ditto. * ppc-ravenscar-thread.h: Ditto. * prologue-value.c: Ditto. * prologue-value.h: Ditto. * ravenscar-thread.c: Ditto. * ravenscar-thread.h: Ditto. * sparc-ravenscar-thread.c: Ditto. * sparc-ravenscar-thread.h: Ditto. * tilegx-linux-tdep.c: Ditto. * unwind_stop_reasons.def: Ditto. * windows-nat.h: Ditto. * xtensa-linux-tdep.c: Ditto. * xtensa-xtregs.c: Ditto. * regformats/regdat.sh: Ditto. * regformats/regdef.h: Ditto. gdb/gdbserver/ 2013-02-12 Pedro Alves <palves@redhat.com> * linux-xtensa-low.c: Ditto. * xtensa-xtregs.c: Ditto.	2013-02-12 19:03:57 +00:00
Joel Brobecker	28e7fd6234	Update years in copyright notice for the GDB files. Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.	2013-01-01 06:33:28 +00:00
Stan Shebs	37ce89ebb2	Make logging work for MI. * NEWS: Mention it. * interps.h (interp_set_logging_ftype): New typedef. (struct interp_procs): New field set_logging_proc. (current_interp_set_logging): Declare. * interps.c (current_interp_set_logging): New function. * cli/cli-logging.c: Include interps.h. (set_logging_redirect): Call current_interp_set_logging. (pop_output_files): Ditto. (handle_redirections): Ditto, plus skip ui-out redirect if MI. * mi/mi-console.h (mi_console_set_raw): Declare. * mi/mi-console.c (mi_console_set_raw): New function. * mi/mi-interp.c (saved_raw_stdout): New global. (mi_set_logging): New function. (_initialize_mi_interp): Add it to interp procs. * gdb.mi/mi-logging.exp: New file.	2012-06-28 22:11:23 +00:00
Joel Brobecker	0b30217134	Copyright year update in most files of the GDB Project. gdb/ChangeLog: Copyright year update in most files of the GDB Project.	2012-01-04 08:17:56 +00:00
Pedro Alves	79a45e254f	2011-08-04 Pedro Alves <pedro@codesourcery.com> * ui-out.h (uiout): Rename to ... (current_uiout): ... this. * ui-out.c (uiout): Rename to ... (current_uiout): ... this. * ada-lang.c (print_it_exception, print_one_exception) (print_mention_exception): Adjust. * breakpoint.c (watchpoint_check): Adjust. (print_breakpoint_location, print_one_breakpoint, breakpoint_1) (default_collect_info, watchpoints_info, print_one_catch_fork) (print_one_catch_vfork, print_one_catch_syscall) (print_one_catch_exec, mention, print_it_ranged_breakpoint) (print_one_ranged_breakpoint, print_mention_ranged_breakpoint) (print_it_watchpoint, print_mention_watchpoint) (print_it_masked_watchpoint, print_mention_masked_watchpoint) (print_it_exception_catchpoint, print_one_exception_catchpoint) (print_mention_exception_catchpoint, say_where, bkpt_print_it) (bkpt_print_mention, momentary_bkpt_print_it) (tracepoint_print_mention, update_static_tracepoint) (tracepoints_info, save_breakpoints): Adjust. * cli-out.c (field_separator): Adjust. * cp-abi.c (list_cp_abis, show_cp_abi_cmd): Adjust. * exceptions.c (catch_exceptions_with_msg, catch_errors): Adjust. * frame.c (get_current_frame): Adjust. * infcmd.c (run_command_1, print_return_value): Adjust. * inferior.c (inferior_command, info_inferiors_command): Adjust. * infrun.c (print_end_stepping_range_reason): Adjust. (print_signal_exited_reason, print_exited_reason): Adjust. (print_signal_received_reason, print_no_history_reason): Adjust. * interps.c (interp_set): Adjust. * osdata.c (info_osdata_command): Adjust. * progspace.c (maintenance_info_program_spaces_command): Adjust. * remote-fileio.c (remote_fileio_request): Adjust. * remote.c (show_remote_cmd): Adjust. * solib.c (info_sharedlibrary_command): Adjust. * source.c (print_source_lines_base): Adjust. * stack.c (print_stack_frame): Adjust. (do_gdb_disassembly, print_frame_info, print_frame): Adjust. * symfile-mem.c (add_vsyscall_page): Adjust. * symfile.c (load_progress, generic_load) (print_transfer_performance): Adjust. * thread.c (info_threads_command, restore_selected_frame) (thread_command): Adjust. * top.c (make_cleanup_restore_ui_file): Adjust. * tracepoint.c (tvariables_info_1, trace_status_mi, tfind_1) (print_one_static_tracepoint_marker): Adjust. * cli/cli-cmds.c (print_disassembly): Adjust. * cli/cli-decode.c (print_doc_line): Adjust. * cli/cli-interp.c (safe_execute_command): Adjust. * cli/cli-logging.c (set_logging_redirect, pop_output_files) (handle_redirections): Adjust. * cli/cli-script.c (show_user_1): Adjust. * cli/cli-setshow.c (do_setshow_command, cmd_show_list): Adjust. * mi/mi-cmd-break.c (breakpoint_notify): Adjust. * mi/mi-cmd-disas.c (mi_cmd_disassemble): Adjust. * mi/mi-cmd-env.c (mi_cmd_env_pwd, mi_cmd_env_path) (mi_cmd_env_dir): Adjust. * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file) (print_partial_file_name, mi_cmd_file_list_exec_source_files): Adjust. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames) (mi_cmd_stack_info_depth, mi_cmd_stack_list_args) (list_args_or_locals): Adjust. * mi/mi-cmd-var.c (print_varobj, mi_cmd_var_create) (mi_cmd_var_delete, mi_cmd_var_set_format, mi_cmd_var_set_frozen) (mi_cmd_var_show_format, mi_cmd_var_info_num_children) (mi_cmd_var_list_children, mi_cmd_var_info_type) (mi_cmd_var_info_path_expression, mi_cmd_var_info_expression) (mi_cmd_var_show_attributes, mi_cmd_var_evaluate_expression) (mi_cmd_var_assign, mi_cmd_var_update, varobj_update_one): Adjust. * mi/mi-interp.c (mi_on_normal_stop): Adjust. * mi/mi-main.c (mi_cmd_gdb_exit, mi_cmd_thread_select) (mi_cmd_thread_list_ids, mi_cmd_thread_info, print_one_inferior) (list_available_thread_groups, mi_cmd_list_thread_groups) (mi_cmd_data_list_register_names) (mi_cmd_data_list_changed_registers) (mi_cmd_data_list_register_values, get_register) (mi_cmd_data_evaluate_expression, mi_cmd_data_read_memory) (mi_cmd_data_read_memory_bytes, mi_cmd_list_features) (mi_cmd_list_target_features, mi_cmd_add_inferior) (mi_execute_command, mi_load_progress): Adjust. * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Adjust. * python/py-auto-load.c (print_script, info_auto_load_scripts): Adjust. * python/py-breakpoint.c (bppy_get_commands): Adjust. * tui/tui-interp.c (tui_command_loop): Adjust. * tui/tui-io.c (tui_setup_io, tui_initialize_io): Adjust.	2011-08-04 19:10:14 +00:00
Michael Snyder	9a2b4c1ba7	2011-01-05 Michael Snyder <msnyder@vmware.com> * cli/cli-cmds.c: Shorten lines of >= 80 columns. * cli/cli-decode.c: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-setshow.c: Ditto. * common/signals.c: Ditto. * mi/mi-cmd-break.c: Ditto. * mi/mi-cmd-disas.c: Ditto. * mi/mi-cmd-stack.c: Ditto. * mi/mi-cmd-var.c: Ditto. * mi/mi-cmds.c: Ditto. * mi/mi-common.h: Ditto. * mi/mi-console.c: Ditto. * mi/mi-interp.c: Ditto. * mi/mi-main.c: Ditto. * osf-share/cma_attr.c: Ditto. * osf-share/cma_deb_core.h: Ditto. * osf-share/cma_debug_client.h: Ditto. * osf-share/cma_handle.h: Ditto. * osf-share/cma_mutex.h: Ditto. * osf-share/cma_stack_int.h: Ditto. * osf-share/cma_tcb_defs.h: Ditto. * python/py-auto-load.c: Ditto. * python/py-breakpoint.c: Ditto. * python/py-cmd.c: Ditto. * python/py-frame.c: Ditto. * python/py-objfile.c: Ditto. * python/py-param.c: Ditto. * python/py-progspace.c: Ditto. * python/py-symbol.c: Ditto. * python/py-value.c: Ditto. * python/python-internal.h: Ditto. * python/python.c: Ditto. * tui/tui-data.c: Ditto. * tui/tui-disasm.c: Ditto. * tui/tui-hooks.c: Ditto. * tui/tui-io.c: Ditto. * tui/tui-layout.c: Ditto. * tui/tui-regs.c: Ditto. * tui/tui-source.c: Ditto. * tui/tui-stack.c: Ditto. * tui/tui-win.c: Ditto. * tui/tui-windata.c: Ditto. * tui/tui-winsource.c: Ditto.	2011-01-06 00:57:05 +00:00
Joel Brobecker	7b6bb8daac	run copyright.sh for 2011.	2011-01-01 15:34:07 +00:00
Michael Snyder	ebcd3b23ee	2010-12-28 Michael Snyder <msnyder@vmware.com> * command.h: Comment clean-up. * cli/cli-cmds.c: Ditto. * cli/cli-cmds.h: Ditto. * cli/cli-decode.c: Ditto. * cli/cli-decode.h: Ditto. * cli/cli-dump.c: Ditto. * cli/cli-interp.c: Ditto. * cli/cli-logging.c: Ditto. * cli/cli-script.c: Ditto. * cli/cli-setshow.c: Ditto. * cli/cli-setshow.h: Ditto.	2010-12-29 02:11:04 +00:00
Jan Kratochvil	8d4d924b76	gdb/ Redirect also uiout and stdtarg{,err} in execute_command_to_string. * cli-logging.c (struct saved_output_files) <targerr>: New. (set_logging_redirect, pop_output_files, handle_redirections): Redirect also gdb_stdtargerr. * defs.h (struct ui_out, make_cleanup_ui_out_redirect_pop): New declarations. * event-top.c (gdb_setup_readline, gdb_disable_readline): Redirect also gdb_stdtargerr. * top.c (execute_command_to_string): Move make_cleanup_ui_file_delete to the top. Redirect also gdb_stdlog, gdb_stdtarg and gdb_stdtargerr. Use ui_out_redirect, register make_cleanup_ui_out_redirect_pop. * tui/tui-io.c (tui_setup_io): Redirect also gdb_stdtargerr. * utils.c (do_ui_out_redirect_pop, make_cleanup_ui_out_redirect_pop): New functions. gdb/testsuite/ * gdb.python/python.exp (set height 0, collect help from uiout) (verify help to uiout): New tests.	2010-09-11 16:00:27 +00:00
Jan Kratochvil	14dba4b472	gdb/ * breakpoint.c (save_breakpoints): Use RETURN_MASK_ALL. * cli-out.c: Include vec.h. (cli_field_fmt, cli_spaces, cli_text, cli_message, cli_flush): New variable stream, initialize it, use it. (cli_redirect): New function comment. Replace the stream and original_stream fields by the new streams field. Remove the original_stream != NULL conditional, assert error on NULL instead. (out_field_fmt, field_separator): New variable stream, initialize it, use it. (cli_out_data_ctor): Assert non-NULL stream. Replace the stream and original_stream fields by the new streams field. (cli_out_set_stream): Replace the stream field by the new streams field. * cli-out.h: Include vec.h. (ui_filep): New typedef, call DEF_VEC_P for it. (struct cli_ui_out_data): Replace the stream and original_stream fields by the new streams field. * cli/cli-logging.c (set_logging_redirect): Call ui_out_redirect with NULL first. Extend the comment. (handle_redirections): Call ui_out_redirect with output. * python/py-breakpoint.c (bppy_get_commands): Move ui_out_redirect calls outside of the TRY_CATCH block. gdb/testsuite/ * gdb.base/ui-redirect.exp: New file.	2010-09-03 15:42:04 +00:00
Jan Kratochvil	58b61394cf	gdb/ * cli-logging.c: Include gdb_assert.h. (set_logging_overwrite): New function. (logging_redirect): New comment. (logging_no_redirect_file, set_logging_redirect) (pop_output_files) <logging_no_redirect_file>: New. (handle_redirections) <!logging_redirect>: New variable no_redirect_file. Remove file autoclose for tee_file_new. No longer discard cleanup for the close of former OUTPUT. Set LOGGING_NO_REDIRECT_FILE. (handle_redirections) <logging_redirect>: gdb_assert LOGGING_NO_REDIRECT_FILE. (show_logging_command) <logging_redirect handling>: Adjust messages for SAVED_FILENAME not NULL. (_initialize_cli_logging): Install set_logging_overwrite and set_logging_redirect.	2010-09-02 15:42:03 +00:00
Jan Kratochvil	44be957ed6	gdb/ * cli-logging.c (logging_overwrite, logging_redirect): Make them static.	2010-08-13 17:35:39 +00:00
Michael Snyder	cdb27c12f3	2010-05-17 Michael Snyder <msnyder@vmware.com> * cli/cli-cmds.c: White space. * cli/cli-decode.c: White space. * cli/cli-dump.c: White space. * cli/cli-interp.c: White space. * cli/cli-logging.c: White space. * cli/cli-script.c: White space. * cli/cli-setshow.c: White space.	2010-05-17 19:28:12 +00:00
Joel Brobecker	4c38e0a4fc	Update copyright year in most headers. Automatic update by copyright.sh.	2010-01-01 07:32:07 +00:00
Pedro Alves	2c0b251b29	2008-02-21 Pedro Alves <pedro@codesorcery.com> Silence a few -Wmissing-prototypes warnings. PR build/9877: * amd64-nat.c: Include "amd64-nat.h". * fork-child.c (_initialize_fork_child): Ditto. * gcore.c (_initialize_gcore): Ditto. * inf-ptrace.c: Include "inf-ptrace.h". (inf_ptrace_store_registers): Make it static. * linux-nat.c (linux_nat_terminal_ours): Make it static. (_initialize_linux_nat): Declare before definition. * linux-tdep.c: Include "linux-tdep.h". * linux-thread-db.c (_initialize_thread_db): Declare before definition. * proc-service.c (_initialize_proc_service): Ditto. * remote.c (remote_send_printf): Make it static. * solib.c: Include "solib.h". * symfile-mem.c (_initialize_symfile_mem): Declare before definition. * ada-lang.c (ada_la_decode, ada_match_name) (ada_suppress_symbol_printing, ada_is_array_type) (ada_value_ptr_subscript, ada_array_length) (ada_to_static_fixed_value): Make them static. (_initialize_ada_language): Declare before definition. * ada-tasks.c (ada_get_task_number, ada_get_environment_task) (ada_task_list_changed, ada_new_objfile_observer): Make them static. (_initialize_tasks): Declare before definition. * addrmap.c (_initialize_addrmap): Declare before definition. * auxv.c (default_auxv_parse): Make it static. * bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make them static. * breakpoint.c (remove_sal): Add line break. (expand_line_sal_maybe): Make it static. * cp-name-parser.y: Include "cp-support.h". * cp-valprint.c (cp_find_class_member): Make it static. * eval.c (value_f90_subarray): Ditto. * exceptions.c (print_any_exception): Ditto. * findcmd.c (_initialize_mem_search): Declare before definition. * frame.c (frame_observer_target_changed): Make it static. * gnu-v3-abi.c (gnuv3_find_method_in): Make it static. * inf-child.c: Include "inf-child.h". * inferior.h (valid_inferior_id): Rename to ... (valid_gdb_inferior_id): ... this. * infrun.c (infrun_thread_stop_requested, siginfo_make_value): Make them static. * jv-lang.c (java_language_arch_info): Make it static. * m2-typeprint.c (m2_get_discrete_bounds): Ditto. * osdata.c (info_osdata_command): Make it static. * regcache.c (regcache_observer_target_changed): Make it static. * reverse.c (_initialize_reverse): Declare before definition. * stabsread.c (cleanup_undefined_types_noname) (cleanup_undefined_types_1): Make them static. * symfile.c (place_section): Make it static. * symtab.c (find_pc_sect_psymtab_closer): Make it static. * target-descriptions.c (_initialize_target_descriptions): Declare before definition. * target.c (default_get_ada_task_ptid, find_default_can_async_p) (find_default_is_async_p, find_default_supports_non_stop): Make them static. (target_supports_non_stop): Add prototype. (dummy_pid_to_str): Make it static. * utils.c (_initialize_utils): Declare before definition. * ada-exp.y (_initialize_ada_exp): Declare before definition. * solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype. * target.h (struct target_ops): Add a prototype to the to_can_execute_reverse callback. * macroscope.c (_initialize_macroscope): Declare before definition. * cp-namespace.c (_initialize_cp_namespace): Declare before definition. * python/python.c (_initialize_python): Declare before definition. * tui/tui-command.c: Include "tui/tui-command.h". * tui/tui-data.c (init_content_element, init_win_info): Make them static. * tui/tui-disasm.c: Include "tui/tui-disasm.h". * tui/tui-interp.c (_initialize_tui_interp): Declare before definition. * tui/tui-layout.c: Include "tui/tui-layout.h". (_initialize_tui_layout): Declare before definition. * tui/tui-regs.c: Include "tui/tui-regs.h". (tui_display_reg_element_at_line): Make it static. (_initialize_tui_regs): Declare before definition. * tui/tui-stack.c (_initialize_tui_stack): Declare before definition. * tui/tui-win.c: Include "tui/tui-win.h". (_initialize_tui_win): Declare before definition. (tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH. * tui/tui-win.h (tui_sigwinch_handler): Delete declaration. (tui_get_cmd_list): Add a prototype. * tui/tui-windata.c: Include tui-windata.h. * tui/tui-wingeneral.c (box_win): Make it static. * cli/cli-logging.c (show_logging_command): Make it static. (_initialize_cli_logging): Declare before definition. * mi/mi-common.c (_initialize_gdb_mi_common): Declare before definition.	2009-02-21 16:14:50 +00:00
Joel Brobecker	0fb0cc7590	Updated copyright notices for most files.	2009-01-03 05:58:08 +00:00
Tom Tromey	724b958c41	* cli/cli-logging.c (handle_redirections): Make a cleanup. * reggroups.c (maintenance_print_reggroups): Make a cleanup. * regcache.c (regcache_print): Make a cleanup. * maint.c (maintenance_print_architecture): Make a cleanup. * dummy-frame.c (maintenance_print_dummy_frames): Make a cleanup.	2008-10-30 20:35:31 +00:00
Daniel Jacobowitz	9b254dd1ce	Updated copyright notices for most files.	2008-01-01 22:53:26 +00:00
Joel Brobecker	a9762ec78a	Switch the license of all .c files to GPLv3. Switch the license of all .h files to GPLv3. Switch the license of all .cc files to GPLv3.	2007-08-23 18:08:50 +00:00
Daniel Jacobowitz	6aba47ca06	Copyright updates for 2007.	2007-01-09 17:59:20 +00:00
Eli Zaretskii	10f9c2135e	* cli/cli-utils.h: * cli/cli-utils.c: * cli/cli-setshow.h: * cli/cli-setshow.c: * cli/cli-script.h: * cli/cli-script.c: * cli/cli-logging.c: * cli/cli-interp.c: * cli/cli-dump.h: * cli/cli-dump.c: * cli/cli-decode.h: * cli/cli-decode.c: * cli/cli-cmds.h: * cli/cli-cmds.c: Add (c) after Copyright. Update FSF address.	2005-12-17 22:40:17 +00:00
Andrew Cagney	920d2a4419	2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.	2005-02-24 13:51:36 +00:00
Andrew Cagney	2c5b56ce99	2005-02-17 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete fprint_setshow parameter. * command.h (fprint_setshow_ftype): Delete. (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Delete fprint_setshow parameter. * aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update. * complaints.c, cris-tdep.c, dwarf2read.c, frame.c: Update. * hppa-tdep.c, infcall.c, m32r-rom.c, maint.c: Update. * mips-tdep.c, nto-tdep.c, observer.c, remote-rdi.c: Update * remote.c, target.c, cli/cli-logging.c: Update.	2005-02-17 13:49:56 +00:00
Andrew Cagney	1bedd21517	2005-02-15 Andrew Cagney <cagney@gnu.org> Mark up add_com, add_info and add_prefix_cmd. * breakpoint.c, cp-support.c, dcache.c, dwarf2read.c: Update. * exec.c, f-valprint.c, frame.c, gcore.c, gnu-nat.c: Update. * go32-nat.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * kod.c, language.c, linux-nat.c, m32r-rom.c, macrocmd.c: Update. * maint.c, memattr.c, mips-tdep.c, nto-procfs.c, objc-lang.c: Update. * ocd.c, pa64solib.c, printcmd.c, procfs.c, regcache.c: Update. * remote-e7000.c, remote-m32r-sdi.c, remote-mips.c: Update. * remote-sds.c, remote-sim.c, remote-st.c, remote-utils.c: Update. * remote.c, rs6000-tdep.c, ser-go32.c, serial.c: Update. * sh-tdep.c, solib.c, somsolib.c, source.c, stack.c: Update. * symfile.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, typeprint.c, utils.c, valprint.c: Update. * win32-nat.c, xcoffsolib.c, cli/cli-cmds.c, cli/cli-dump.c: Update. * cli/cli-logging.c, tui/tui-layout.c, tui/tui-regs.c: Update. * tui/tui-stack.c, tui/tui-win.c: Update.	2005-02-15 15:49:28 +00:00
Andrew Cagney	1a966eabdf	2005-02-14 Andrew Cagney <cagney@gnu.org> Mark up add_cmd. * arch-utils.c, avr-tdep.c, breakpoint.c, corefile.c: Update. * cp-abi.c, cp-namespace.c, cp-support.c, dummy-frame.c: Update. * exec.c, gnu-nat.c, go32-nat.c, hppa-tdep.c, infcmd.c: Update. * infrun.c, interps.c, macrocmd.c, maint.c, memattr.c: Update. * mips-tdep.c, ocd.c, osabi.c, printcmd.c, regcache.c: Update. * reggroups.c, remote-fileio.c, remote-rdi.c, remote.c: Update. * sol-thread.c, source.c, stack.c, symfile-mem.c: Update. * symfile.c, thread.c, tracepoint.c, valprint.c, value.c: Update. * win32-nat.c, cli/cli-cmds.c, cli/cli-dump.c: Update. * cli/cli-logging.c, tui/tui-regs.c: Update.	2005-02-14 18:10:11 +00:00
Andrew Cagney	7915a72c7f	2005-02-14 Andrew Cagney <cagney@gnu.org> Mark up add_setshow functions, replace "PRINT:" comment prefix with "FIXME: i18n:". * aix-thread.c, alpha-tdep.c, arm-tdep.c, breakpoint.c: Update. * cris-tdep.c, dwarf2read.c, frame.c, hppa-tdep.c: Update. * infcall.c, m32r-rom.c, maint.c, mips-tdep.c: Update. * nto-tdep.c, observer.c, remote-rdi.c, remote.c: Update. * target.c, cli/cli-logging.c: Update.	2005-02-14 16:18:43 +00:00
Andrew Cagney	a3f171870f	2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up some of printf_filtered and printf_unfiltered. * ada-lang.c, annotate.c, arch-utils.c, breakpoint.c: Update. * corelow.c, cp-namespace.c, cp-support.c, dcache.c: Update. * demangle.c, dsrec.c, dwarf2read.c, dwarfread.c: Update. * event-loop.c, event-top.c, exec.c, f-valprint.c: Update. * gdbtypes.c, inf-loop.c, inf-ptrace.c, inf-ttrace.c: Update. * infcmd.c, inflow.c, infrun.c, inftarg.c, language.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, maint.c: Update. * mdebugread.c, memattr.c, monitor.c, objc-lang.c: Update. * ocd.c, osabi.c, printcmd.c, procfs.c, regcache.c: Update. * remote.c, solib-som.c, solib.c, somsolib.c, source.c: Update. * stack.c, symfile.c, symmisc.c, target.c, thread.c: Update. * top.c, utils.c, valprint.c, value.c, cli/cli-cmds.c: Update. * cli/cli-dump.c, cli/cli-logging.c, tui/tui-hooks.c: Update. * tui/tui-regs.c, tui/tui-win.c: Update.	2005-02-12 00:39:24 +00:00
Andrew Cagney	e2e0b3e57f	2005-02-11 Andrew Cagney <cagney@gnu.org> Mark up error_no_arg, query, perror_with_name, complaint, and internal_error. * breakpoint.c, cp-abi.c, cp-namespace.c, cp-support.c: Update. * cris-tdep.c, dbxread.c, dictionary.c, dsrec.c: Update. * dummy-frame.c, dve3900-rom.c, dwarf2-frame.c, dwarf2expr.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, event-loop.c: Update. * exceptions.c, exec.c, f-lang.c, findvar.c, fork-child.c: Update. * frame-unwind.c, frame.c, frv-linux-tdep.c, frv-tdep.c: Update. * gdb_assert.h, gdbarch.c, gdbtypes.c, gnu-nat.c: Update. * go32-nat.c, hppa-tdep.c, hppabsd-nat.c, hpread.c: Update. * i386-linux-nat.c, i386-nat.c, i386-tdep.c, i386bsd-nat.c: Update. * i386fbsd-nat.c, inf-ptrace.c, inf-ttrace.c, infcall.c: Update. * infcmd.c, inflow.c, infptrace.c, infrun.c, inftarg.c: Update. * interps.c, language.c, linespec.c, linux-nat.c: Update. * m32r-linux-nat.c, m68k-tdep.c, m68kbsd-nat.c: Update. * m68klinux-nat.c, m88kbsd-nat.c, macroexp.c, macroscope.c: Update. * macrotab.c, maint.c, mdebugread.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mips64obsd-nat.c: Update. * mipsnbsd-nat.c, mn10300-tdep.c, monitor.c, nto-procfs.c: Update. * objc-lang.c, objfiles.c, objfiles.h, ocd.c, osabi.c: Update. * parse.c, ppc-bdm.c, ppc-linux-nat.c, ppc-sysv-tdep.c: Update. * ppcnbsd-nat.c, ppcobsd-nat.c, printcmd.c, procfs.c: Update. * regcache.c, reggroups.c, remote-e7000.c, remote-mips.c: Update. * remote-rdp.c, remote-sds.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote.c, rs6000-nat.c, rs6000-tdep.c: Update. * s390-nat.c, s390-tdep.c, sentinel-frame.c, serial.c: Update. * sh-tdep.c, sh3-rom.c, sh64-tdep.c, shnbsd-nat.c: Update. * solib-aix5.c, solib-svr4.c, solib.c, source.c: Update. * sparc-nat.c, stabsread.c, stack.c, symfile.c, symtab.c: Update. * symtab.h, target.c, tracepoint.c, ui-file.c, ui-out.c: Update. * utils.c, valops.c, valprint.c, vax-nat.c, vaxbsd-nat.c: Update. * win32-nat.c, xcoffread.c, xstormy16-tdep.c: Update. * cli/cli-cmds.c, cli/cli-logging.c, cli/cli-script.c: Update. * cli/cli-setshow.c, mi/mi-cmd-break.c, mi/mi-cmds.c: Update. * mi/mi-console.c, mi/mi-getopt.c, mi/mi-out.c: Update. * tui/tui-file.c, tui/tui-interp.c: Update.	2005-02-11 18:13:55 +00:00
Andrew Cagney	8a3fe4f86c	2005-02-10 Andrew Cagney <cagney@gnu.org> Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update.	2005-02-11 04:06:14 +00:00
Andrew Cagney	335cca0d6e	2005-02-10 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_enum_cmd, add_setshow_cmd_full) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd): Replace print string parameter with fprint_setshow function. * command.h (fprint_setshow_ftype): Define. Update declarations. * cli/cli-setshow.c (do_setshow_command): When fprint_setshow is available, use that. * cli/cli-decode.h (struct cmd_list_element): Add field fprint_setshow. * complaints.c (fprint_setshow_complaints): New function. (_initialize_complaints): Pass to add_setshow_zinteger_cmd. * hppa-tdep.c (_initialize_hppa_tdep): Replace "print" parameter with NULL. * mips-tdep.c (_initialize_mips_tdep): Ditto. * m32r-rom.c (_initialize_m32r_rom): Ditto. * cris-tdep.c (_initialize_cris_tdep): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * remote-rdi.c (_initialize_remote_rdi): Ditto. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * dwarf2read.c (_initialize_dwarf2_read): Ditto. * frame.c (_initialize_frame): Ditto. * target.c (initialize_targets): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * observer.c (_initialize_observer): Ditto. * infcall.c (_initialize_infcall): Ditto. * breakpoint.c (_initialize_breakpoint): Ditto. * cli/cli-logging.c (_initialize_cli_logging): Ditto. * remote.c (add_packet_config_cmd, _initialize_remote): Ditto.	2005-02-10 17:32:53 +00:00
Andrew Cagney	b3f4233622	2004-07-28 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_cmd): Delete function. (add_setshow_cmd_full): Make static. * command.h (add_setshow_cmd, add_setshow_cmd_full): Delete. (add_setshow_filename_cmd, add_setshow_string_cmd): Declare. * cli/cli-decode.c (add_setshow_filename_cmd) (add_setshow_string_cmd): New functions. * nto-tdep.c (_initialize_nto_tdep): Update. Fix parameters. * mips-tdep.c (_initialize_mips_tdep): Update. * m32r-rom.c (_initialize_m32r_rom): Update. Update copyright. * cli/cli-logging.c (_initialize_cli_logging): Update. * complaints.c (_initialize_complaints): Update. * remote.c (_initialize_remote): Update.	2004-07-28 19:42:01 +00:00
Andrew Cagney	3b64bf9877	2004-07-28 Andrew Cagney <cagney@gnu.org> * cli/cli-decode.c (add_setshow_zinteger_cmd) (add_setshow_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_cmd_full): Add help_doc and print parameters. Make string parameters constant. * command.h: Update. Update copyright. * remote.c (add_packet_config_cmd, _initialize_remote): Ditto. * observer.c (_initialize_observer): Ditto. * frame.c (_initialize_frame): Ditto. * complaints.c (_initialize_complaints): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * target.c (initialize_targets): Ditto. * cli/cli-logging.c (_initialize_cli_logging): Ditto. * infcall.c (_initialize_infcall): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * m32r-rom.c (_initialize_m32r_rom): Ditto. * remote-rdi.c (_initialize_remote_rdi): Ditto. * d10v-tdep.c (_initialize_d10v_tdep): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto.	2004-07-28 17:26:27 +00:00
Daniel Jacobowitz	83a8cccaa8	* cli/cli-logging.c (pop_output_files): Add void to function definition.	2003-06-29 19:41:14 +00:00
Daniel Jacobowitz	0fac0b4199	./ * cli/cli-logging.c: New file. * cli-out.c (struct ui_out_data): Add original_stream. (cli_redirect): New function. (cli_ui_out_impl): Add cli_redirect. (cli_out_new): Initialize original_stream. * ui-out.c (default_ui_out_impl): Add NULL for redirect member. (uo_redirect, ui_out_redirect): New. * ui-out.h (struct ui_out_impl): Add redirect member. (redirect_ftype): New. (ui_out_redirect): Add prototype. * Makefile.in: Add rules for cli-logging.c. * NEWS: Mention "set logging". mi/ * mi-out.c (mi_ui_out_impl): Add NULL for redirect member. tui/ * tui-out.c (tui_ui_out_impl): Add NULL for redirect member. doc/ * gdb.texinfo (Logging output): New chapter.	2003-06-28 16:19:07 +00:00

49 Commits