"thread" parameter to the watchpoint command and set the
"thread" member of the breakpoint struct.
* doc/gdb.texinfo: Add new parameter's description.
* testsuite/gdb.base/watch_thread_num.c: New testcase source file.
* testsuite/gdb.base/watch_thread_num.exp: New testcase expect file.
* gdb.h (gdb_breakpoint): Add parameter pending.
* breakpoint.c (gdb_breakpoint): Add parameter pending.
* mi/mi-cmd-break.c (mi_break_insert): Change
comment to refer to manual. Add support for
the -f flag, for pending breakpoint.
from break_command_1. New parameters COND_STRING, THREAD
PARSE_CONDITITION_AND_THREAD and PENDING_BREAK_SUPPORT.
The previous FLAG parameter split into TEMPFLAG and
HARDWAREFLAG.
When PARSE_CONDITION_AND_THREAD is not set, duplicate
the passed condition string.
(struct captured_breakpoint_args): Remove
(do_captured_breakpoint): Remove.
(break_command_1): Relay to break_command_really.
(gdb_breakpoint): Relay to break_command_really.
non-contiguous address ranges.
* addrmap.c, addrmap.h: New files.
* block.h (struct addrmap): New forward declaration.
(struct blockvector): New member, 'map'.
(BLOCKVECTOR_MAP): New accessor macro.
* block.c: #include "addrmap.h"
(blockvector_for_pc_sect): If the blockvector we've found has
an address map, use it instead of searching the blocks.
* buildsym.c: #include "addrmap.h"
(pending_addrmap_obstack, pending_addrmap_interesting): New static
variables.
(really_free_pendings): If we have a pending addrmap, free it too.
(record_block_range): New function.
(make_blockvector): If we have an interesting pending addrmap,
record it in the new blockvector.
(start_symtab, buildsym_init): Assert that there is no pending
addrmap now; we should have cleaned up any addrmaps we'd built
previously.
(end_symtab): If there is a pending addrmap left over that didn't
get included in the blockvector, free it.
* buildsym.h (struct addrmap): New forward declaration.
(record_block_range): New prototype.
* objfiles.c: #include "addrmap.h".
(objfile_relocate): Relocate the blockvector's address map, if
present.
* dwarf2read.c (dwarf2_record_block_ranges): New function.
(read_func_scope, read_lexical_block_scope): Call it.
* Makefile.in (SFILES): Add addrmap.c.
(addrmap_h): New header dependency variable.
(COMMON_OBS): Add addrmap.o.
(addrmap.o): New rule.l
(block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).
* block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
pointer to the block, not its index in the blockvector.
(block_for_pc_sect): Use the returned block, instead of looking it
up ourselves.
* block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
declarations.
* breakpoint.c (resolve_sal_pc): Use returned block, instead of
looking it up ourselves.
* stack.c (print_frame_label_vars): Disable function, which
depends on the block's index.
* buildsym.c (finish_block): Return the block we've built.
* buildsym.h (finish_block): Update prototype.
* defs.h (CORE_ADDR_MAX): New constant.
* breakpoint.h (insert_breakpoints): Change
return type to void.
* breakpoint.c (insert_breakpoints): Change
return type to void. Rename local return_val
variable to error.
* infrun.c (keep_going): Instead of checking
return value from insert_breakpoints, catch exception.
The checks of breakpoints_inserted before calling
remove_breakpoints are removed, as remove_breakpoint
won't touch uninserted breakpoints. In a number of places,
we're interested if a breakpoint is inserted at particular
PC, and we now use breakpoint_inserted_here_p. In a few
places, insert_breakpoints can be called unconditionally,
since it won't try to insert already inserted breakpoint.
* breakpoint.h (regular_breakpoint_inserted_here_p): New
declaration.
* breakpoint.c (regular_breakpoint_inserted_here_p): New.
(breakpoint_inserted_here_p): Use
regular_breakpoint_inserted_here_p.
* infrun.c (breakpoints_inserted): Remove.
(resume): Don't check for breakpoints_inserted before
remove_hw_watchpoints. Use breakpoint_inserted_here_p.
(proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
(handle_inferior_event): Don't use breakpoints_inserted.
Use breakpoints_meant_to_be_inserted and
breakpoints_inserted_here_p.
(insert_step_resume_breakpoint_at_sal, keep_going): Use
breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
(normal_stop): Don't check for breakpoints_inserted. Don't
set breakpoints_inserted.
(keep_going): Don't check for breakpoints_inserted.
(insert_step_resume_breakpoint_at_sal): Don't insert
breakpoints
* breakpoint.h (struct breakpoint): Remove
from_tty and flag fields.
* breakpoint.c (break_command_1): Don't set
from_tty and flag field set of breakpoint.
(create_ada_exception_breakpoint): Don't set
the from_tty field.
* breakpoint.h (struct bpstats): Make
the breakpoint_at field point at const bp_location.
* breakpoint.c (bpstat_alloc): Accept const
bp_location.
(breakpoint_here_p, breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p)
(breakpoint_thread_match, bpstat_stop_status)
(read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
const bp_location for iteration.
(print_it_typical, print_bp_stop_message): Use
const bp_location variable.
* Makefile.in (breakpoint_h): Update dependency.
* breakpoint.c (clear_command): Do not remove
breakpoints from breakpoint_chain. Collect breakpoints
to delete in a vector.
* breakpoint.h (breakpoint_p): New typedef for pointer to
breakpoint. Register vector of breakpoint_p.
Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (watchpoints_triggered): New.
(bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
Check watchpoint_triggered instead. Combine handling for software
and hardware watchpoints. Do not use target_stopped_data_address
here. Always check a watchpoint if its scope breakpoint triggers.
Do not stop for thread or overlay events. Improve check for
triggered watchpoints without a value change.
(watch_command_1): Insert the scope breakpoint first. Link the
scope breakpoint to the watchpoint.
* breakpoint.h (enum watchpoint_triggered): New.
(struct breakpoint): Add watchpoint_triggered.
(bpstat_stop_status): Update prototype.
(watchpoints_triggered): Declare.
* infrun.c (enum infwait_status): Add infwait_step_watch_state.
(stepped_after_stopped_by_watchpoint): Delete.
(handle_inferior_event): Make stepped_after_stopped_by_watchpoint
local. Handle infwait_step_watch_state. Update calls to
bpstat_stop_status. Use watchpoints_triggered to check
watchpoints.
* remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
(remote_stopped_data_address): Do not check it.
* gdb.texinfo (Setting Watchpoints): Adjust warning text about
multi-threaded watchpoints.
* gdbint.texinfo (Watchpoints): Describe how watchpoints are
checked. Describe sticky notification. Expand description
of steppable and continuable watchpoints.
(Watchpoints and Threads): New subsection.
* gdb.threads/watchthreads.c (thread_function): Sleep between
iterations.
* gdb.threads/watchthreads.exp: Allow two watchpoints to trigger
at once for S/390. Generate matching fails and passes.
bp_shlib_disabled enumerator.
(struct bp_location): New members shlib_disabled,
global_next, enabled and function_name.
Rename pending to condition_not_parsed.
* breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
(ALL_BP_LOCATIONS_SAFE): Likewise.
(breakpoint_enabled): Don't check for pending.
(condition_command): Free and update all locations of
a breakpoint.
(insert_bp_location): Adjust.
(software_breakpoint_inserted_here_p): Don't care
if breakpoint is enabled, as soon as it's inserted.
(print_it_typical): Print bpstat's location, not
bpstat's breakpoint's location.
(bpstat_stop_status): Iterate over all locations, not
all breakpoints.
(print_breakpoint_location): New.
(print_one_breakpoint): Renamed to
(print_one_breakpoint_location): ...this. Take
parameters to describe which location is being
printed. Modify code to properly print header
for several locations and individual locations.
(print_one_breakpoint): Print all locations.
(breakpoint_has_pc): New.
(describe_other_breakpoints): Use the above.
(check_duplicates): Renamed to...
(check_duplicates_for): .. this.
(check_duplicates): Use check_duplicates_for.
(allocate_bp_location): Adjust.
(set_raw_breakpoint_without_location): New,
extracted from set_raw_breakpoint.
(set_breakpoint_location_function): New.
(set_raw_breakpoint): Use
set_raw_breakpoint_without_location.
(make_breakpoint_permanent): Mark all locations
as inserted.
(disable_breakpoints_in_shlibs): Iterate over
locations.
(disable_breakpoints_in_unloaded_shlib): Likewise.
(re_enable_breakpoints_in_shlibs): Likewise.
(mention): Say "pending" when breakpoint has
zero locations. If breakpoint has more than one
location, say so.
(add_location_to_breakpoint): New.
(create_breakpoint): Accept symtabs_and_lines, not
symtab_and_line. Pass extra sals to
add_location_to_breakpoint.
(create_breakpoints): Pass symtabs_and_lines to
create_breakpoints.
(break_command_1): Make pending breakpoints
have zero locations.
(do_captured_breakpoint): Remove wrong allocation.
(clear_command): Iterate over all locations.
(unlink_locations_from_global_list): Renamed
from unlink_location_from_global_list. Remove
all locations.
(delete_breakpoint): Remove all locations.
Iterate over all locations when deciding which
other location to re-enable.
(all_locations_are_pending): New.
(update_breakpoint_locations): Renamed from
update_breakpoint_location. Try to match old
and new locations using names of containing
functions.
(breakpoint_re_set_one): Adjust.
(find_location_by_number): New.
(disable_command): Allow disabling individual location.
(enable_command): Allow enabling individual location.
* breakpoint.c: Adjust all uses of breakpoint's
enable state to for bp_shlib_disabled change.
(resolve_pending_breakpoint): Remove.
(re_enable_breakpoints_in_shlibs): Remove.
(unlink_locations_from_global_list): New.
(update_breakpoint_locations): New.
(breakpoint_re_set_one): Don't bail out on pending breakpoints.
Use parse_condition and update_breakpoint_location to
reset breakpoint. Ignore 'symbol not found' error from
decode_line_1.
(breakpoint_re_set): Don't emit newline before the
reason why breakpoint is not reset.
(do_enable_breakpoint): Don't specially process pending
breakpoints.
(free_bp_location): New.
(break_command_1): For pending breakpoints, initialize
all fields of a sal with zeroes.
* breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
* infcmd.c (post_create_inferior): Don't call
re_enable_breakpoints_in_shlibs.
* infrun.c (handle_inferior_event): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
create_breakpoints, implementing most of its logic.
Take just a single sal, single address string and
single condition. Do not take parsed condition at
all.
(create_breakpoints): Just call create_breakpoint
for each sal.
(find_condition_and_thread): New.
(break_command_1): Use find_condition_and_thread.
Do not keep parsed conditions.
(do_captured_breakpoint): Don't convert
condition string to struct expression.
* breakpoint.h (breakpoint_at): Change type
to bp_location*.
* breakpoint.c (bpstat_alloc): Take bp_location,
not breakpoint.
(bpstat_find_breakpoint): Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
(bpstat_find_step_resume_breakpoint): Likewise.
(bpstat_num): Likewise.
(print_it_typical): Likewise.
(print_bp_stop_message): Likewise.
(watchpoint_check): Likewise.
(bpstat_what): Likewise.
(bpstat_get_triggered_catchpoints): Likewise.
(breakpoint_auto_delete): Likewise.
(delete_breakpoint): Likewise.
(bpstat_stop_status): Pass location, not breakpoint,
to bpstat_alloc. Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
(build_command_line): Require arguments only for if and while commands.
(get_command_line, execute_user_command, execute_control_command):
Fix wording of warning messages.
(print_command_lines): Print breakpoint commands.
(execute_control_command): Call commands_from_control_command to
handle the `commands' command inside a body of a flow-control command.
(read_next_line): Recognize the `commands' command and build a
command line structure for it.
(recurse_read_control_structure, read_command_lines): Handle
`commands' similarly to `if' and `while'.
* breakpoint.c (get_number_trailer): Document the special meaning
of NULL as the first argument PP.
(commands_from_control_command): New function.
* breakpoint.h (commands_from_control_command): Add prototype.
* defs.h (commands_control): New enumerated value for enum
command_control_type.
(ada_exception_catchpoint_p, ada_decode_exception_location)
(ada_decode_assert_location): Add declaration.
* ada-lang.c: Add include of annotate.h and valprint.h.
(exception_catchpoint_kind): New enum.
(function_name_from_pc, is_known_support_routine)
(ada_find_printable_frame, ada_unhandled_exception_name_addr)
(ada_exception_name_addr_1, ada_exception_name_addr)
(print_it_exception, print_one_exception, print_mention_exception)
(print_it_catch_exception, print_one_catch_exception)
(print_mention_catch_exception, catch_exception_breakpoint_ops)
(print_it_catch_exception_unhandled)
(print_one_catch_exception_unhandled)
(print_mention_catch_exception_unhandled, print_it_catch_assert)
(print_one_catch_assert, print_mention_catch_assert)
(ada_exception_catchpoint_p, error_breakpoint_runtime_sym_not_found)
(ada_get_next_arg, catch_ada_exception_command_split)
(ada_exception_sym_name, ada_exception_sym_name)
(ada_exception_breakption_ops, ada_exception_catchpoint_cond_string)
(ada_parse_catchpoint_condition, ada_exception_sal)
(ada_decode_exception_location)
(ada_decode_assert_location): New function.
(catch_exception_unhandled_breakpoint_ops): New global variable.
(catch_assert_breakpoint_ops): New global variable.
* breakpoint.c: Add include of ada-lang.h.
(print_one_breakpoint): Do not print the condition for Ada
exception catchpoints.
(create_ada_exception_breakpoint): New function.
(catch_ada_exception_command, catch_assert_command): New function.
(catch_command_1): Add support for the new "catch exception" and
"catch assert" commands.
(_initialize_breakpoint): Add help description for the new catch
commands.
* Makefile.in (ada-lang.o): Add dependency on annotate.h and
valprint.h.
(breakpoint.o): Add dependency on ada-lang.h.
* breakpoint.c (describe_other_breakpoints): Add thread parameter.
Annotate display with thread number where appropriate.
(create_breakpoints): Add thread parameter to call to
describe_other_breakpoints.
insert a single-step breakpoint an error instead of a warning.
* breakpoint.c (remove_single_step_breakpoints): Bail out early if
no breakpoints are inserted.
gdb/
* breakpoint.c (print_one_breakpoint): For MI-like UI, output
fullname field.
gdb/doc/
* gdb.texinfo (Breakpoint table commands): Document the fullname
field in -break-list output.
gdb/testsuite/
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Test for the fullname
field.
* breakpoint.c (BREAK_ARGS_HELP): New mecro.
(_initialize_breakpoint): Enhance break, tbreak, hbreak and thbreak
commands' help by adding more information and using BREAK_ARGS_HELP
to duplicate the common parts. Remove now-redundant cross-references.
testsuite/
* gdb.base/help.exp (help b, help br, help bre, help brea)
(help break): Update the expected message.
* command.h (add_setshow_integer_cmd): Make VAR an integer.
* cli/cli-decode.c (add_setshow_integer_cmd): Update to match.
* valops.c (value_string): Add a cast.
* eval.c (evaluate_subexp_standard): Use gdb_byte for byte buffers.
* breakpoint.c (re_enable_breakpoints_in_shlibs): Use gdb_byte for
byte buffers.
* target.h (struct target_ops): For to_insert_hw_breakpoint and
to_remove_hw_breakpoint use gdb_byte for byte buffer parameters.
* breakpoint.h (struct bp_location): Make shadow_contents a
gdb_byte buffer.
* cli/cli-setshow.c (do_setshow_command): Fix cast.
* cli/cli-dump.c (restore_section_callback)
(restore_binary_file): Use gdb_byte for byte buffers.
* proc-service.c (ps_ptwrite, ps_ptread, ps_pdwrite): Fix casts.
(ps_xfer_memory): Use gdb_byte for byte buffers.
* tracepoint.c (mem2hex): Use gdb_byte for byte buffers, and char
for string buffers.
* ser-tcp.c (net_open): Make len a socklen_t.
* cp-valprint.c, c-valprint.c, infcall.c: Use value_contents or
value_contents_writeable, include note that there are problems.
* breakpoint.c, infcall.c: Use VALUE_LVAL.
* exceptions.h (exception_fprintf): Declare.
(exception_print): Drop pre_print parameter.
* mi/mi-main.c (mi_execute_command): Update exception_print call.
* cli/cli-interp.c (safe_execute_command): Update exception_print
call.
* remote.c (remote_open_1): Instead of passing an error prefix to
catch_exceptions, use catch_exceptions and exception_fprintf.
(remote_start_remote): Change return type to void.
* breakpoint.c (insert_bp_location): Instead of passing an error
prefix to catch_exceptions, use catch_exceptions and
exception_fprintf.
(insert_catchpoint): Change return type to void.
(break_command_1): Update exception_print call.
* exceptions.c (exception_fprintf): New function.
(print_exception): New function.
(exception_print): Use print_exception.
* target.h (to_stopped_data_address): Change prototype to
take a CORE_ADDR pointer and return an int.
* target.c (update_current_target): Change to_stopped_data_address
to match new prototype.
(debug_to_stopped_data_address): Change appropriately.
* breakpoint.c (bpstat_stop_status): Change call to
target_stopped_data_address to use new prototype.
* frv-tdep.c (frv_have_stopped_data_address): New function.
(frv_stopped_data_address): Change to new prototype and
functionality.
* ia64-linux-nat.c (ia64_stopped_data_address): Change to new
prototype and functionality.
(ia64_stopped_by_watchpoint): New function.
* i386-nat.c (i386_stopped_data_address): Change to new
prototype and functionality.
(i386_stopped_by_watchpoint): New function.
* remote.c (remote_stopped_data_address): Change to new prototype
and functionality.
* remote-m32r-sdi.c (m32r_stopped_data_address): Ditto.
* config/frv/tm-frv.h (frv_stopped_data_address): Change prototype.
(STOPPED_BY_WATCHPOINT): Change to use frv_have_stopped_data_address.
* config/i386/nm-i386.h (STOPPED_BY_WATCHPOINT): Change to use
new i386_stopped_by_watchpoint function.
(i386_stopped_by_watchpoint): New prototype.
(i386_stoppped_data_address): Change to new prototype.
* config/ia64/nm-linux.h (STOPPED_BY_WATCHPOINT): Change to use
new ia64_stopped_by_watchpoint function.
(ia64_stopped_by_watchpoint): New prototype.
(ia64_stopped_data_address): Ditto.
* observer.sh: Add struct so_list declaration.
* Makefile.in: Add dependencies on observer.h for solib.c and
breakpoint.c.
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): New
function.
(_initialize_breakpoint): Register
disable_breakpoints_in_unloaded_shlib as an observer of the
"solib unloaded" observation event.
(re_enable_breakpoints_in_shlibs): For bp_shlib_disabled breakpoints,
call decode_line_1 so unfound breakpoint errors are silent.
* solib.c (update_solib_list): When a solib is discovered to have
been unloaded by the program, notify all observers of the
"solib unloaded" observation event.
* infrun.c (handle_inferior_event): Initialize stopped_by_watchpoint
to -1.
* breakpoint.c (bpstat_stop_status): Move check for ignoring
untriggered watchpoints to a separate if clause. Update function
comment regarding STOPPED_BY_WATCHPOINT argument.
STOPPED_BY_WATCHPOINT. Use it instead of testing
target_stopped_data_address agaist 0 to check whether
or not we stopped due to a hardware watchpoint.
* breakpoint.h (bpstat_stop_status): Adapt prototype.
* infrun.c (handle_inferior_event): Call bpstat_stop_status
with new argument.
From Paul Koning <pkoning@equallogic.com>:
* breakpoint.c (free_valchain): New function.
(insert_bp_location, delete_breakpoint): Use free_valchain.
(remove_breakpoint): Do not remove the valchain.
(bpstat_stop_status): If not stopped by watchpoint, skip
watchpoints when generating stop status list.
* infrun.c (handle_inferior_event): Make
stepped_after_stopped_by_watchpoint a global variable.
* remote.c (remote_stopped_data_address): Return watch data
address rather than zero if stepped_after_stopped_by_watchpoint is
set.
* defs.h (nquery, yquery): New prototypes.
* breakpoint.c (break_command_1): Use new nquery interface.
* utils.c (defaulted_query, nquery, yquery): New functions.
* breakpoint.h (struct breakpoint): Add new flag, from_tty,
and pending fields for pending breakpoint support.
* breakpoint.c (breakpoint_enabled): Add check for not pending.
(condition_command): Only parse condition if not a pending
breakpoint.
(print_one_breakpoint): Add support for pending breakpoints.
(describe_other_breakpoints): Add checks to verify we are not
dealing with pending breakpoints.
(check_duplicates): Don't check pending breakpoints.
(set_raw_breakpoint): Initialize pending flag.
(do_restore_lang_radix_cleanup): New cleanup routine.
(resolve_pending_breakpoint): New function.
(re_enable_breakpoints_in_shlibs): Try and resolve any
pending breakpoints via resolve_pending_breakpoint.
(mention): Add pending breakpoint support.
(parse_breakpoint_sals): Add new parameter to pass to
decode_line_1 to indicate silent errors when files or functions
are not found. Change all callers.
(do_captured_parse_breakpoint): New function.
(break_command_1): Change prototype to return an rc value and to
take an optional pending breakpoint pointer. Support creating
a pending breakpoint if a "not found" form of error occurs when
parsing the breakpoint. Also support resolving an existing pending
breakpoint and be silent if the resolution fails.
(create_breakpoints): Change prototype to take pending breakpoint
pointer. When resolving a pending breakpoint, use the new pointer
to provide a conditional or commands added by the end-user.
(delete_breakpoint): Add appropriate check for pending.
(breakpoint_re_set_one): Ditto.
(do_enable_breakpoint): Ditto.
and check the specified thread for each breakpoint.
* breakpoint.h (bpstat_stop_status): Update prototype.
* infrun.c (handle_inferior_event): Update calls to
bpstat_stop_status.
argument, and change first argument to a CORE_ADDR.
* breakpoint.h (bpstat_stop_status): Update prototype.
* infrun.c (adjust_pc_after_break): Add a new comment.
(handle_inferior_event): Update calls to bpstat_stop_status.
* breakpoint.c (breakpoint_re_set_one): Set b->cond, b->val, and
b->exp to NULL after freeing so that error during re-parsing or
evaluation of expressions associated with breakpoint don't
eventually lead to re-freeing of storage.
Committed by Andrew Cagney.
clear_proceed_status doesn't free the command tree we're
evaluating out from under us, zero the bpstat's pointer to it, and
take care of freeing it ourselves.
* cli/cli-script.c (make_cleanup_free_command_lines): Make this
function externally visible.
* cli/cli-script.h (make_cleanup_free_command_lines): New
declaration.
* linespec.h (decode_line_1): Add new not_found_ptr parameter.
* linespec.c (decode_line_1): Add new parameter. Pass on
new parameter to decode_variable and symtab_from_filename
functions.
(decode_variable): Add new not_found_ptr parameter. Throw exception
rather than failing if the not_found_ptr is non-null and the
function is not found.
(symtab_from_filename): Add new not_found_ptr parametr. Throw
exception rather than failing if the not_found_ptr is non-null and
the source file is not found.
* breakpoint.c: Change all callers of decode_line_1 to add default
extra parameter for decode_line_1 calls.
* tracepoint.c: Ditto.
* cli/cli-cmds.c: Ditto.
* breakpoint.c (breakpoint_enabled): New function to test whether
breakpoint is active and enabled.
(insert_bp_location, insert_breakpoints): Call new function to test
for enabled breakpoint.
(remove_breakpoint, breakpoint_here_p, breakpoint_thread_match)
(bpstat_should_step, bpstat_have_active_hw_watchpoints)
(disable_breakpoints_in_shlibs, hw_watchpoint_used_count)
(disable_watchpoints_before_interactive_call_start)
(breakpoint_re_set_one): Ditto.
(bpstat_stop_status): Use new function and simplify test.
instead of a breakpoint argument. Check the bp_location's type.
Fix a reversed condition for hardware breakpoints.
(insert_bp_location): Update call to remove_breakpoint.
(remove_breakpoints): Likewise. Use ALL_BP_LOCATIONS.
(remove_hw_watchpoints): Likewise.
(reattach_breakpoints): Likewise.
(detach_breakpoints): Likewise.
(delete_breakpoint): Likewise.
* breakpoint.c (ALL_BP_LOCATIONS, ALL_BP_LOCATIONS_SAFE): New
macros.
(bp_location_chain): New variable.
(allocate_bp_location): New function.
(set_raw_breakpoint): Use it.
(delete_breakpoint): Remove ->loc from the bp_location_chain.
``requested_address''.
* breakpoint.c (breakpoint_adjustment_warning)
(adjust_breakpoint_address): New static functions.
(print_it_typical): Issue warning if breakpoint's address is different
from its requested address.
(set_raw_breakpoint, set_longjmp_resume_breakpoint, watch_command_1)
(breakpoint_re_set_one): Set breakpoint's
``requested_address'' field. Set ``address'' field to the
result of calling adjust_breakpoint_address() on the requested
address.
* breakpoint.c (until_break_command): Add new argument. Use it to
decide whether to stop only at the current frame or not.
* breakpoint.h (until_break_command): Update prototype.
* infcmd.c (until_command): Add new argument to until_break_command
call.
(advance_command): New function.
(_initialize_infcmd): Update help string for 'until' command.
Add new 'advance' command.
* breakpoint.c: Include "gdb_assert.h".
(deprecated_frame_in_dummy): Assert that generic dummy frames are
not being used.
* Makefile.in (breakpoint.o): Update dependencies.
* ada-lang.c (find_printable_frame): Use get_frame_type instead of
deprecated_frame_in_dummy.
* stack.c (print_frame_info_base): Ditto.
(frame_info): Ditto.
(print_frame_info_base): Ditto. Delete dead code.
Index: tui/ChangeLog
2002-11-23 Andrew Cagney <ac131313@redhat.com>
* tuiStack.c (tuiShowFrameInfo): Use get_frame_type instead of
deprecated_frame_in_dummy. Fix coding style.
sal.end fields.
(get_current_or_default_source_symtab_and_line): Ditto.
* breakpoint.c (parse_breakpoint_sals): Use correct accessor function
so we do not cause a new source symtab to be searched for (reverting an
unintentional change from the 2002-09-20 patch).
* scm-lang.c (scm_unpac): Ditto.
current_source_line static.
(list_command): Moved to cli/cli-cmds.c.
(ambiguous_line_spec): Moved to cli/cli-cmds.c.
(get_first_line_listed): New accessor function.
(get_lines_to_list): New accessor function.
(get_current_source_symtab_and_line): New function. Retrieves the
position in the source code that we consider current.
(get_current_or_default_source_symtab_and_line): New function.
Like the above but attempts to determine a default position if one
is not currently defined.
(set_current_source_symtab_and_line): New function. Sets the source
code position considered current and returns the previously set one.
(clear_current_source_symtab_and_line): Reset stored information about
a current source line.
(_initialize_source): Remove registration for the "list" command and
its alias.
* source.h: Add declarations for the new functions above.
* symtab.h: Remove declarations for the global variables mentioned
above.
* breakpoint.c (parse_breakpoint_sals): Use accessor functions to
obtain current source line.
* linespec.c (decode_line_1): Ditto.
* macroscope.c (default_macro_scope): Ditto.
* scm-lang.c (scm_unpac): Ditto.
* stack.c (print_frame_info_base): Ditto.
* symfile.c (clear_symtab_users): Ditto.
* symtab.c (decode_line_spec): Ditto.
* cli/cli-cmds.c (list_command): Moved here from source.c.
(ambiguous_line_spec): Moved here from source.c.
(_init_cli_cmds): Add definition for "list" and its alias.
* Makefile.in: Update dependencies.
* cli/cli-script.c (copy_command_lines): New function.
* defs.h (copy_command_lines): Export.
* testsuite/gdb.base/commands.exp: New tests for commands
attached to a temporary breakpoint, and for commands that
delete the breakpoint they are attached to.
2002-08-26 Michael Snyder <msnyder@redhat.com>
* breakpoint.c (bpstat_stop_status): Instead of copying the
pointer to the breakpoint commands struct, make a new copy
of the struct and point to that.
(bpstat_clear): Free the commands struct.
(bpstat_clear_actions): Free the commands struct.
(bpstat_do_actions): Free the command actions. Also execute
the local cleanups, instead of deleting them.
(delete_breakpoint): Leave the commands field of the bpstat
chain alone -- it will be freed later.
when breakpoints fail. Move general breakpoint error messages to
insert_breakpoints.
* breakpoint.c (insert_breakpoints): Change warnings when
breakpoints are nto inserted to specify the type. Remove call to
memory_error when hardware breakpoints can't be inserted. Remove
multiple calls to warning so all messages are sent to the user at
once.
(delete_breakpoints): Make insert error messsages more explicit.
procfs appears to be broken when debugging on multi-processor
machines. So enable software single stepping in order to avoid
using the procfs interface to do next/step operations, using
internal breakpoints instead.
* infrun.c (handle_inferior_event): Readjust the stop_pc by
DECR_PC_AFTER_BREAK when hitting a single step breakpoint, to
make this pc address equal to the value it would have if the
system stepping capability was used. Also set a new flag used
to ensure that we don't readjust the PC one more time later.
* breakpoint.c (bpstat_stop_status): Do not adjust the PC
address by DECR_PC_AFTER_BREAK when software single step is
in use for this architecture, as this has already been taken
care of in handle_inferior_event().
when a condition is added to an existing breakpoint.
(commands_command): Likewise for commands.
(set_ignore_count): Likewise for ignore counts.
If no tty, do not simply return, still need to send event
notification.
(ignore_command): Only print a newline if the command came
from a tty.
Don't call breakpoints_changed, since this is now properly
handled by set_ignore_count.
selected_frame_address and selected_level with field
selected_frame_id.
(save_inferior_status): Update. Use get_frame_id.
(struct restore_selected_frame_args): Delete.
(restore_selected_frame): Update. Use frame_find_by_id.
(restore_inferior_status): Update.
* breakpoint.h (struct breakpoint): Change type of
watchpoint_frame to frame_id.
* breakpoint.c (insert_breakpoints): Use frame_find_by_id. Remove
call to get_current_frame.
(do_enable_breakpoint): Use frame_find_by_id. Remove call to
get_current_frame.
(watchpoint_check): Use frame_find_by_id.
* frame.h (record_selected_frame): Delete declaration.
* stack.c (record_selected_frame): Delete function.
* frame.h (struct frame_id): Define.
(get_frame_id): Declare.
(frame_find_by_id): Declare.
* frame.c (frame_find_by_id): New function.
(get_frame_id): New function.
* breakpoint.c (clear_command): Rewrite middle section to
combine two loops with identical control conditions.
Add a cleanup to eliminate a memory leak.
* stack.c (get_selected_block): Add new argument `addr_in_block',
used to return the exact code address we used to select the block,
not just the block.
* blockframe.c (get_frame_block, get_current_block): Same.
* frame.h (get_frame_block, get_current_block,
get_selected_block): Update declarations.
* linespec.c, stack.c, blockframe.c, breakpoint.c, findvar.c,
linespec.c, varobj.c, printcmd.c, symtab.c: Callers changed.
gdb/mi/ChangeLog:
* mi-cmd-stack.c (list_args_or_locals): Pass new arg to
get_frame_block. (See entry in gdb/ChangeLog.)
* breakpoint.c: Add support for hardware breakpoints in overlays.
(overlay_events_enabled): New state variable.
(insert_breakpoints): Use overlay_events_enabled to decide
whether to attempt to set a breakpoint at the overlay load addr.
Handle bp_hardware_breakpoint as well as bp_breakpoint.
(remove_breakpoint): Use overlay_events_enabled to decide
whether breakpoints need to be removed from overlay load addr.
Handle bp_hardware_breakpoint as well as bp_breakpoint.
(bpstat_stop_status): Handle bp_hardware_breakpoint in overlays.
(create_overlay_event_breakpoint, enable_overlay_breakpoints,
disable_overlay_breakpoints): Update overlay_events_enabled.
* gdbarch.c gdbarch.h: Regenerate.
* breakpoint.c (create_longjmp_breakpoint): Always compile this
function.
(breakpoint_reset): Test GET_LONGJMP_TARGET_P().
* infrun.c (GET_LONGJMP_TARGET): Delete default definition.
(handle_inferior_event): Test GET_LONGJMP_TARGET_P().
* arm-tdep.h (struct gdbarch_tdep): Add jb_pc and jb_elt_size fields.
* arm-tdep.c (arm_get_longjmp_target): New function.
(arm_gdbarch_init): Initialize jb_pc to -1. If ABI handler changes
this to a positive value register arm_get_longjmp_target as the
longjmp handler.
* arm-linux-tdep.c (arm_get_longjmp_target): Delete.
(arm_linux_init_abi): Set up longjmp description in tdep.
* armnbsd-nat.c (get_longjmp_target): Delete.
* armnbsd-tdep.c (arm_netbsd_init_abi_common): Set up longjmp
description in tdep.
* config/arm/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC): Delete.
(get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* config/arm/tm-linux.h (arm_get_longjmp_target): Delete declaration.
(GET_LONGJMP_TARGET): Delete.
* arch-utils.h (generic_in_function_epilogue_p): Declare extern.
* breakpoint.c (watchpoint_check): Add test whether the pc is
currently in the epilogue of a function.
* gdbarch.c: Autogenerated from gdbarch.sh.
* gdbarch.h: Ditto.
* gdbarch.sh (function_list): Add `in_function_epilogue_p' definition.
`enable' and `disable' identifiers, because some platforms define
in their system headers symbols with global scope that go by those
names.
* breakpoint.h (enum enable_state): Rename from `enum enable'.
Also rename all the enum members to have the "bp_" prefix.
(struct breakpoint): Rename the `enable' member to `enable_state'.
(enum bpdisp): Rename all members to have the "disp_" prefix.
* breakpoint.c: All users of `enum enable' and `enum bpdisp'
changed.
(args_for_catchpoint_enable): Rename the `enable' member to
`enable_p'. All users changed.
* tracepoint.h (enum enable): Remove.
(struct tracepoint): The member `enabled' is now `int enabled_p'.
* tracepoint.c: All users of the `enabled' member changed.
* printcmd.c (struct display): The `status' member is now an int.
* memattr.h (struct mem_region): Rename the `status' member to
`enabled_p'.
(enum enable): Remove.
* memattr.c: Change all users of the `status' member of struct
mem_region to use `enabled_p' instead.
* infcmd.c (run_stack_dummy): Use disp_del instead of del.
* go32-nat.c: Remove the kludgey work-around for conflicts between
<dos.h> and "breakpoint.h".
* tui/tuiSourceWin.c: Use disp_del instead of del.
* tui/tuiSource.c: Use disp_del instead of del.
* tui/tuiDisassem.c: Use disp_del instead of del.
* top.c (command_loop): Remove tui insert_mode hacks; don't call
tuiCleanUp because this must be made with atexit by tui.
* symfile.c (symbol_file_command): Remove call to TUIDO
* stack.c (show_and_print_stack_frame_stub): Remove tui check;
not necessary when using the selected frame hooks.
(print_stack_frame_stub): Likewise.
(print_frame_info_base): Likewise.
(print_frame_info): Likewise.
(up_silently_command): Likewise.
(down_silently_command): Likewise.
(show_stack_frame): Likewise for TUIDO.
(select_frame): Likewise.
(select_and_print_frame): Likewise.
(stack_publish_stopped_with_no_frame): Remove.
(select_and_maybe_print_frame): Remove.
* main.c (captured_main): Remove tui_fileopen and tuiInit; tui
must use the initialize ui hook.
* infrun.c (normal_stop): Remove call to TUIDO; tui must use the
selected frame hooks.
* event-top.c (command_handler): Remove tui insert_mode hack.
* defs.h: Remove TUIDO; Only include tui.h.
* breakpoint.c (mention): Remove calls to TUIDO.
(delete_breakpoint): Remove tui hacks; tui must install
the breakpoint hooks.
* infrun.c (handle_inferior_event): Replace prev_pc test in all
calls to bpstat_stop_status (removed in 1999-09-24). This test
helps distinguish stepping over a breakpoint trap from stepping
thru a jump to the instruction after a breakpoint trap.
(handle_inferior_event): Don't bother writing the PC if
DECR_PC_AFTER_BREAK is zero (optimization).
* breakpoint.c (bpstat_stop_status): Add comment explaining the
purpose and usage of the "not_a_breakpoint" argument in computing
the breakpoint address.
(line_completion_function): If we are completing on locations,
back up the start of word pointer past all characters which can
appear in a location spec.
(location_completer): New function.
* completer.h: Add prototype for location_completer.
* symtab.c (make_source_files_completion_list)
(add_filename_to_list, not_interesting_fname): New functions.
(filename_seen): New function, body extracted from
output_source_filename.
(output_source_filename): Call filename_seen to check if the file
was already printed.
(make_symbol_completion_list): If TEXT includes a
double-quoted string, return an empty list, not NULL.
(make_file_symbol_completion_list): New function, similar to
make_symbol_completion_list but with an additional argument
SRCFILE.
* symtab.h (make_file_symbol_completion_list)
(make_source_files_completion_list): Add prototypes.
* breakpoint.c (_initialize_breakpoint): Make location_completer
be the completion function for all commands which set breakpoints
and watchpoints.
(top-level): #include "completer.h".
* tracepoint.c (_initialize_tracepoint): Make location_completer
be the completion function for the "trace" command.
(top-level): #include "completer.h".
* printcmd.c (_initialize_printcmd): Make location_completer be
the completion function for the "print", "inspect", "call", and
"disassemble" commands.
(top-level): #include "completer.h".
* infcmd.c (_initialize_infcmd): Make location_completer be the
completion function for the "go", "jump", and "until" commands.
(top-level): #include "completer.h".
* breakpoint.c (delete_breakpoint): Pass mark_inserted to
remove_breakpoint, so that the subsequent test for
bpt->inserted will succeed, and duplicates will be fixed up.
* thread.c (delete_step_resume_breakpoint): New function.
Maintain internal consistency of the thread list while deleting
a step_resume_breakpoint.
* gdbthread.h (delete_step_resume_breakpoint): Export.
* breakpoint.c (bpstat_find_step_resume_breakpoint):
Make thread-aware: don't return a step_resume_breakpoint
for the wrong thread.
* infrun.c (wait_for_inferior): Call delete_step_resume_breakpoint
instead of delete_breakpoint_current_contents.
(fetch_inferior_event): Ditto.
(handle_inferior_event): Call delete_step_resume_breakpoint
instead of delete_breakpoint.
its address, to decide whether it's a watchpoint or not. Zero
is a valid code address.
(update_breakpoints_after_exec): Admonishing comments.
* breakpoint.h (struct breakpoint): Doc fixes.
* linespec.h: New file. Declarations for linespec.c.
* linespec.c, alpha-tdep.c, breakpoint.c, parse.c, source.c,
symtab.c, tracepoint.c: Include the above.
* completer.c: New file. Line completion stuff for GDB.
(get_gdb_completer_word_break_characters,
get_gdb_completer_quote_characters): New functions. Accessors for
useful completer internal data.
(filename_completer, line_completion_function, skip_quoted): Moved
here from top.c.
* completer.h: New file. Declarations for the above.
* linespec.c (decode_line_1): Use
get_gdb_completer_word_break_characters and
get_gdb_completer_quote_characters.
* top.c: Include completer.h.
(filename_completer, line_completion_function, skip_quoted):
Moved to completer.c.
* corefile.c, exec.c, source.c, symfile.c, linespec.c: Include
completer.h.
* Makefile.in (SFILES): Add completer.c.
(COMMON_OBS): Add completer.o.
(completer.o): New target.
(linespec.o, alpha-tdep.o, breakpoint.o, parse.o, source.o,
symtab.o, tracepoint.o): Add linespec.h to dependencies list.
(corefile.o, exec.o, source.o, symfile.o, linespec.o): Add completer.h
to dependencies list.
* valops.c (value_cast): Indentation fix-up.
* acconfig.h (HAVE_PRGREGSET32_T, HAVE_PRFPREGSET32_T,
HAVE_STRUCT_LINK_MAP32): New configure macros.
* config.in: Ditto.
* configure.in: Test for the above new macros.
* breakpoint.c: Update copyright date.
* core-sol2.c: Include v9/sys/privregs.h directly to
work around a bug in Sun's Solaris 8 header files.
(fetch_core_registers): Use the above new configure macros to
handle cross-debugging of 32-bit core files on a 64-bit host.
* sol-thread.c (ps_pdmodel) New function.
(rw_common): For debugging of 32-bit apps on a 64-bit host,
truncate addresses to 32 bits.
* solib.c (solib_extract_address): Functionize. Make 32/64 aware.
(LM_ADDR, LM_NEXT, LM_NAME): Ditto.
(IGNORE_FIRST_LINK_MAP): Ditto.
(first_link_map_member): Make 32/64 aware.
(open_symbol_file_object): Ditto.
(current_sos): Ditto.
* defs.h (struct continuation_arg): make 'data' a union, to avoid
casting problems when int and pointer are not the same size.
* event-top.c (command_handler): use data as a union.
(command_line_handler_continuation): ditto.
* infcmd.c (step_1_continuation): use data as a union. Re-indent.
(step_once): ditto. (finish_command_continuation): ditto.
(finish_command): ditto.
* breakpoint.c (until_break_command): use data as a union.
(until_break_command_continuation): ditto.
* utils.c (add_intermediate_continuation): fix typo in comment.
breakpoint.c, breakpoint.h (remove_hw_watchpoints): New function.
infrun.c (resume): Remove hardware watchpoints before stepping
when CANNOT_STEP_HW_WATCHPOINTS is nonzero.
* breakpoint.c (insert_breakpoints, do_enable_breakpoint):
Reselect the saved frame silently after frame selection for
watchpoint evaluation.
(insert_breakpoints): Add missing space in `Hardware watchpoint
deleted' message. Do not reinsert hardware watchpoint if it is
already marked for deletion at next stop.
* breakpoint.c (insert_breakpoints, remove_breakpoint)
(bpstat_stop_status, can_use_hardware_watchpoint): Don't insert,
remove, or check status of hardware watchpoints for entire structs
and arrays unless the user explicitly asked to watch that struct
or array.
(insert_breakpoints): Try to insert watchpoints for all the values
on the value chain, even if some of them fail to insert.
* values.c (value_primitive_field): Set the offset in struct value
we return when the field is a packed bitfield.
* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
possible nested-if confusion.
* breakpoint.c (breakpoint_here_p): Ditto.
(breakpoint_inserted_here_p): Ditto.
(breakpoint_thread_match): Ditto.
* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability
prototypes.
* symtab.h: Add prototype for _initialize_source.
* value.h: Add prototype for _initialize_value.
* defs.h: Include sys/types.h or stddef.h to get size_t.
(make_cleanup): Add make_cleanup_func typedef and switch to using
a prototype for this function.
(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
using mmalloc.
* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c dwarf2read.c
dwarfread.c elfread.c eval.c exec.c gdbtk-cmds.c gdbtk.c infcmd.c
infrun.c mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c valops.c:
Cast parameters passed to make_cleanup to use the new
make_cleanup_func typedef.
More warning cleanups. There are still a bunch of places where the first
argument to make_cleanup is not cast to (make_cleanup_func); these are
either due to the function fitting the make_cleanup_func specification
already (e.g. free()) or they are in files that weren't compiled when
I did my make on a Linux native system. Bwahahaha. You can see them
like this:
grep make_cleanup\ * | grep -v make_cleanup_func
I'll surely go back and clean up the remaining suspicious calls in
GDB one of these days. :-)
Thu Oct 1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
* breakpoint.c (bpstat_stop_status): Do not consider an
untripped watchpoint as a "hit".
(readline_begin_hook, readline_hook, readline_end_hook): Declare.
* breakpoint.c (commands_command): Build message in temporary buffer
and pass that, as well as tty control flag, to read_command_lines.
* top.c (readline_begin_hook, readline_hook, readline_end_hook):
Define here.
(command_loop): Check for non-NULL instream before looping.
(command_line_input): Use readline_hook when appropriate, to get
user input from a GUI window.
(read_next_line): Also build prompt if getting user input from a GUI.
(recurse_read_control_structure): Fix typo in comment.
(read_command_lines): Use passed in prompt and tty flag to decide how
to build message. Use readline_begin_hook when appropriate, to set
up a GUI interaction window. Just return head, whether NULL or not,
after using readline_end_hook to complete GUI interaction.
(define_command, document_command): Build message in a temporary
buffer and pass it to read_command_lines, along with tty flag.
* gdbtk.c (gdbtk_readline_begin, gdbtk_readline, gdbtk_readline_end):
New functions.
(tk_command_loop): Set instream to NULL to enable Tk user interaction.
(gdbtk_init): Set readline_begin_hook, readline_hook,
and readline_end_hook.
* gdbtk.tcl (gdbtk_tcl_readline_begin, gdbtk_tcl_readline,
gdbtk_tcl_readline_end): New functions.
(tclsh): Pack scroll bar on right side of window, not left.
PR 9385
infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to
avoid conflict with Solaris /usr/include/thread.h.
that is referenced nowhere else.
(set_breakpoint): Ditto.
(do_enable_breakpoint): Created from enable_once_breakpoint
with a couple of changes.
(enable_breakpoint): Call do_enable_breakpoint with an appropriate
bpdisp enum value to set disposition of breakpoint.
(enable_once_breakpoint): Ditto.
(enable_delete_breakpoint): Ditto.
* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
* symtab.c (find_pc_line): Improve comments.
* gdbtk.c: Fix a couple of misspellings.
* xcoffread.c: Ditto.
* breakpoint.h (enum bpdisp): Add del_at_next_stop.
* breakpoint.c (insert_breakpoints, watchpoint_check,
bpstat_stop_status): Avoid bad references to memory freed via
delete_breakpoint on watchpoints going out of scope.
Do not delete these watchpoints, disable them and change their
disposition to del_at_next_stop instead.
(breakpoint_auto_delete): Delete all breakpoints whose disposition
is del_at_next_stop.
(breakpoint_init_inferior): Use switch to avoid reference to
already deleted breakpoint.
Fixes dangling pointer problems with watchpoints.
storage leaks.
(breakpoint_re_set_one): Fix b->exp, b->val, b->cond storage leaks.
* infcmd.c (run_command), solib.c (locate_base): Check for
target_has_execution in addition to inferior_pid, a core file
from a threaded program is yielding a non-zero inferior_pid.
* sparc-tdep.c (get_saved_register): Handle window registers
in a dummy frame correctly.
* breakpoint.c (breakpoint_re_set_one): Keep temporary
breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
and bp_step_resume in case breakpoint_re_set_one is called due
to a step over a dlopen call.
* infrun.c (wait_for_inferior): Always remove breakpoints from
inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
that hardware watchpoint removal problems won't leave breakpoint
traps in the target.
* configure configure.in: Make --enable-gdbtk be the default.
* remote-e7000.c (e7000_insert_breakpoint,
e7000_remove_breakpoint): Use e7000 based breakpoints, not memory
breakpoints.
* (e7000_wait): Adjust PC back by two when we see a breakpoint to
compensate for e7000 maladjustment.
* sparcl-tdep.c (sparclite_check_watch_resources): Fix logic bug
which prevented hardware watchpoints from working.
around calls to create_longjmp_breakpoint. Why install the
breakpoints if we can't find the longjmp target?
* infrun.c (wait_for_inferior): Cleanup comments near call test.
* remote-mips.c: Fixed a bunch of prototypes to avoid char/int
complaint from picky compilers. Add comment to mips_expect.
Replace all instances of sr_get_debug with remote_debug.
* (mips_readchar): Don't jam init string to monitor.
mips_initialize() handles that.
* (mips_receive_header): Print better message when we get too
much garbage.
* (mips_request): Allow caller to pass in buff to allow them to
analyze the returned message.
* (mips_initialize): Re-do initialization to try sending a BREAK,
a ^C, and then a download escape sequence. Cleanup protocol
startup. Eliminate sleeps. Clear breakpoints (if using monitor
breakpoints). Re-init frame.
* (mips_detach): Close down target.
start-sanitize-gm
* (mips_resume): Pass signal down to target.
* (mips_create_inferior): Start target with TARGET_SIGNAL_PWR.
end-sanitize-gm
* (mips_wait): Handle return status with registers, or breakpoint stuff.
* (mips_kill): Add ^C handling.
* (mips_insert_breakpoint mips_remove_breakpoint): Call new
breakpoint stuff if enabled.
* (calculate_mask remote_mips_set_watchpoint
remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
Hardware watchpoint/breakpoint stuff.
* (common_breakpoint): Common code for new monitor breakpoint commands.
* (mips_load): Don't use `prompt'. It's a global variable.
* top.c (dont_repeat_command): New command for use in
user-defined commands to suppress auto-repeat (by hittin return key).
start-sanitize-gm
* utils.c (request_quit): Call target_kill here. Good idea.
Needs a better implementation.
end-sanitize-gm
* valops.c: Add start of auto function-call abandonment capability.
start-sanitize-gm
* c-exp.y: Add code (currently disabled) to handle GM dynamic
structures (it conflicts with @!).
* eval.c (evaluate_subexp_standard): ditto.
* expprint.c (print_subexp dump_expression): ditto.
* expression.h (enum exp_opcode): ditto.
* parse.c (length_of_subexp): ditto.
* configure, configure.in: Add mip*-*-magic* target.
* magic.c magic.h: Special routines to handle GM stuff (like
stepping through dispatcher).
end-sanitize-gm
commands.
* top.c (struct user_args): Structure for holding arguments to
user defined commands.
(print_command_line): Delete unused "tmp_chain" variable. Clean
up flow control by having cases exit in the same manner.
Before executing a command or evaluating an expression, substitute
the current $arg0..$arg9 values if the command/expression uses them.
(arg_cleanup): New function.
(setup_user_args, locate_arg, insert_args): Likewise.
(execute_user_command): Allow arguments to user defined commands.
* Allow if/while commands to be used within a breakpoint command
list.
* breakpoint.c (bpstat_do_actions): Call execute_control_command
rather than execute_command (passes entire command structure rather
than just the command line text).
(breakpoint_1): Use "print_command_line" to print a breakpoint
command line (including control structures).
* gdbcmd.h (execute_control_command): Provide extern decl.
(print_command_line): Likewise.
* top.c (execute_control_command): No longer static.
(print_command_line): New function to recursively print a command
line, including control structures.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* breakpoint.c (delete_breakpoint, enable_breakpoint,
disable_breakpoint): Don't call breakpoints_changed; it is now
called via the *_breakpoint_hook functions.
* annotate.c (_initialize_annotate, breakpoint_changed): New functions.
--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
where appropriate.
* General hackery to support alternate user-interface.
* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
disable_breakpoint): Call hooks for alternate user-interface.
* defs.h: Add declarations for alternate user-interface hooks.
* main.c (main): Add --nw (and --nowindows) options to disable
the GUI.
* (near call to command_loop): Call command_loop_hook if set.
* (fputs_unfiltered): Call fputs_unfiltered_hook if set.
* stack.c: Call print_frame_info_listing_hook if set.
* top.c (gdb_init): Initialize targets.c and utils.c prior to
other files to make sure that calls to error and warning will
work. Call init_ui_hook after everything else.
* utils.c (query): Call query_hook if set.
* (gdb_flush): Call flush_hook if set.
* Change _initialize_utils to initialize_utils cuz we don't use
automatic initialization of utils.c anymore.
* Support for TK GUI.
* Makefile.in: Add rule for gdbtk.o.
* configure.in: Add support for --enable-gdbtk.
* gdbtk.c: New file. Contains support routines for TK interface.
* gdbtk.tcl: New file. Implements GUI policy.
* remote.c: Get rid of #ifdef DONT_USE_REMOTE. It's no longer
necessary.
* breakpoint.h (hit_count): New breakpoint field.
* breakpoint.c (show_breakpoint_hit_counts): New variable.
(clear_breakpoint_hit_counts): New function.
(bpstat_stop_status): Increment the hit count.
(breakpoint_1): Display the hit count.
* infcmd.c (run_command): Reset breakpoint hit counts.
* target.c (generic_mourn_inferior): Don't clear ignore counts if
displaying hit counts.
