Remove a duplicate `unsupported relocation type' message and the setting
of the `bfd_error_bad_value' error from `mips_elf32_rtype_to_howto',
added with commit f3185997ac ("PR 22875: Stop strip corrupting unknown
relocs"), <https://sourceware.org/ml/binutils/2018-02/msg00445.html>.
This message is already produced and the `bfd_error_bad_value' error set
by `mips_elf32_rtype_to_howto' before a NULL howto is returned, so there
is no need to repeat these actions here.
bfd/
* elf32-mips.c (mips_info_to_howto_rel): Remove the calls to
`_bfd_error_handler' and to set the `bfd_error_bad_value' error.
Remove ATTRIBUTE_UNUSED annotation from the `abfd' parameter in
`elf_hppa_info_to_howto' now that commit f3185997ac ("PR 22875: Stop
strip corrupting unknown relocs"),
<https://sourceware.org/ml/binutils/2018-02/msg00445.html>, made it
used.
bfd/
* elf-hppa.h (elf_hppa_info_to_howto_rel): Remove
ATTRIBUTE_UNUSED from `abfd'.
Call `mips_elf32_rtype_to_howto' directly rather than via the
`->elf_backend_mips_rtype_to_howto' method in the o32 backend,
complementing commit 861fb55ab5 ("Defer allocation of R_MIPS_REL32 GOT
slots"), <https://sourceware.org/ml/binutils/2008-08/msg00096.html>, and
reverting the change to `mips_info_to_howto_rel' originally made with
commit 0a44bf6950 ("mips-vxworks support"),
<https://sourceware.org/ml/binutils/2006-03/msg00179.html>.
With `mips_vxworks_rtype_to_howto' gone there is a single backend method
used across all o32 targets, so there in no need for the indirection and
the associated extra cost. This also makes the o32 backend consistent
with the n32 and n64 backends.
bfd/
* elf32-mips.c (mips_info_to_howto_rel): Call
`mips_elf32_rtype_to_howto' directly rather than via
`->elf_backend_mips_rtype_to_howto'.
This patch adds the following relocation support into binutils bfd linker.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
This is a regression for the corner case of a hidden symbol in a PIC/PIE
binary which is subject to both a new-style GOTDATA relocation and an
old-style GOT relocation. In this case, depending on the link order,
the R_SPARC_RELATIVE dynamic relocation for the GOT slot needed because
of the old-style relocation can be replaced with R_SPARC_NONE coming
from the GOTDATA relocation.
The fix simply records whether an old-style GOT relocation is seen for a
symbol and prevents the R_SPARC_NONE from being generated in this case.
bfd/
* elfxx-sparc.c (struct _bfd_sparc_elf_link_hash_entry): Add new flag
has_old_style_got_reloc.
(_bfd_sparc_elf_check_relocs) <GOT relocations>: Set it for old-style
relocations. Fix a couple of long lines.
(_bfd_sparc_elf_relocate_section) <R_SPARC_GOTDATA_OP>: Do not generate
a R_SPARC_NONE for the GOT slot if the symbol is also subject to
old-style GOT relocations.
ld/
* testsuite/ld-sparc/sparc.exp: Add test for mixed GOTDATA/GOT relocs.
* testsuite/ld-sparc/gotop-hidden.c: New file.
* testsuite/ld-sparc/got-hidden32.s: Likewise.
* testsuite/ld-sparc/got-hidden64.s: Likewise.
* testsuite/ld-sparc/pass.out: Likewise.
The TLSDESC entry in a lazy procedure linkage table is called indirectly
with "callq *(%rax)". This patch adds an ENDBR64 to support indirect
branch tracking in Intel CET. The TLSDESC PLT entry now looks like:
0xf3, 0x0f, 0x1e, 0xfa, /* endbr64 */
0xff, 0x35, 8, 0, 0, 0, /* pushq GOT+8(%rip) */
0xff, 0x25, 16, 0, 0, 0 /* jmpq *GOT+TDG(%rip) */
The BND prefix isn't needed since MPX isn't used for TLSDESC.
bfd/
PR ld/23000
* elf64-x86-64.c (elf_x86_64_finish_dynamic_sections): Add
ENDBR64 to the TLSDESC PLT entry.
ld/
PR ld/23000
* testsuite/ld-x86-64/tlsdesc.pd: Updated.
STT_FILE and a bunch of other symbol types aren't proper symbols to
mark the start of a function's code.
* elf64-ppc.c (ppc64_elf_get_synthetic_symtab): Trim uninteresting
symbols. Use size_t counts. Delete redundant opd test.
* elf32-ppc.c (struct ppc_elf_link_hash_entry): Make tls_mask
field unsigned.
(update_local_sym_info): Likewise for local_got_tls_masks.
(ppc_elf_tls_optimize): Likewise for lgot_masks.
Commit f15d0b545b trimmed some unnecessary TPREL relocs, but missed
changing another place where they are allocated.
* elf64-ppc.c (ppc_size_one_stub): Fix comment typo.
(ppc64_elf_layout_multitoc): Allocate relocs for tprel as we
do in size_dynamic_sections.
If a symbol is made dynamic by --dynamic-list, it has non-IR reference.
bfd/
PR ld/22983
* elflink.c (bfd_elf_link_mark_dynamic_symbol): Set
non_ir_ref_dynamic if a symbol is made dynamic by --dynamic-list.
ld/
PR ld/22983
* testsuite/ld-plugin/lto.exp: Run PR ld/22983 test.
* testsuite/ld-plugin/pr22983.d: New file.
* testsuite/ld-plugin/pr22983.t: Likewise.
* testsuite/ld-plugin/pr22983a.c: Likewise.
* testsuite/ld-plugin/pr22983b.c: Likewise.
Linking objects containing jumps targeting the end of a section triggers
assertion in the xlate_offset_with_removed_text. Such jumps may be
generated by a compiler as a dead code and not removed at -O0. Allow
such jumps.
While at it make bsearch argument match comparison function expectations
and use bfd_vma for address fields in the struct xlate_map_entry.
bfd/
2018-03-15 Max Filippov <jcmvbkbc@gmail.com>
* elf32-xtensa.c (xlate_map_entry): Change types of address
fields from 'unsigned' to 'bfd_vma'.
(xlate_offset_with_removed_text): Use struct xlate_map_entry as
the key argument to bsearch. Allow offsets past the end of a
section, use the last map entry for translation of such offsets.
This calculation in relocate_section
if (stub_entry->stub_type == ppc_stub_save_res)
relocation += (stub_sec->output_offset
+ stub_sec->output_section->vma
+ stub_sec->size - htab->sfpr->size
- htab->sfpr->output_offset
- htab->sfpr->output_section->vma);
to adjust from the original out-of-line save/restore function address
in sfpr to a copy at the end of stub_sec goes wrong when stub_sec is
padded, because the copy is no longer at the end of stub_sec. The
solution is to pad before copying sfpr, so the copy is always at the
end of stub_sec.
* elf64-ppc.c (sfpr_define): Adjust for stub_sec size having
sfpr size added before defining alias symbols.
(ppc64_elf_build_stubs): Add stub section padding before
copying sfpr contents and defining save/restore alias symbols.
Extend
commit b7c871edcd
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Wed May 17 07:57:15 2017 -0700
Mark debug sections referenced by kept debug sections
to handle the local debug definition section.
bfd/
PR ld/20882
* elflink.c (elf_gc_mark_debug_section): Also check the local
debug definition section.
ld/
PR ld/20882
* testsuite/ld-gc/pr20882.d: Also dump and check .debug_abbrev
section.
* testsuite/ld-gc/pr20882b.s: Add .debug_abbrev section.
PR 22113
incldue * coff/pe.h (struct pex64_unwind_info): Add a rawUnwindCodesEnd
field.
bfd * pei-x86_64.c (pex64_get_unwind_info): Change to a boolean
function. Add an end address parameter. Check access of the data
pointer to make sure that they do not extend beyond the end
address. Return FALSE if any check fails. Add the end address
pointer to the ui structure.
(pex64_xdata_print_uwd_codes): Check accesses of the raw unwind
codes to make sure that they do not extend beyond the end address
pointer. Print an error message and return immediately if any
check fails.
Following on from PR 22929, I have found the same problem exists with
other ifunc supporting targets too. Plus see this link for the bug
being reported against the s390x binutils for Fedora rawhide:
https://bugzilla.redhat.com/show_bug.cgi?id=1553705
So I am going to check in the patch below which applies the same
change that H.J. made for the x86_64 target to the other affected
targets. (Specifically: S390, AArch64 and Sparc). Plus it adds a new
test to the linker testsuite to make sure that this problem stays
fixed.
bfd * elf64-s390.c (elf_s390_relocate_section): Move check for
relocations against non-allocated sections to before the code that
handles ifunc relocations.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Treat
relocs against IFUNC symbols in non-allocated sections as relocs
against FUNC symbols.
* elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise.
ld * testsuite/ld-ifunc/ifuncmod5.s: New test. Checks that targets
that support IFUNC symbols can handle relocations against those
symbols in NOTE sections.
* testsuite/ld-ifunc/ifuncmod5.d: New file: Driver for the new
test.
* testsuite/ld-ifunc/ifunc.exp: Run the new test.
When resolving a relocation against IFUNC symbol in a SHT_NOTE section
without SHF_ALLOC, we treat it as relocation against FUNC symbol since
it needs the address of IFUNC symbol, not the address returned by IFUNC
function.
bfd/
PR ld/22929
* elf32-i386.c (elf_i386_relocate_section): Treat relocation
against IFUNC symbol in SHT_NOTE section without SHF_ALLOC as
relocation against FUNC symbol.
* elf64-x86-64.c (elf_x86_64_relocate_section): Likewise.
ld/
PR ld/22929
* testsuite/ld-i386/i386.exp: Run PR ld/22929 test.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr22929.d: New file.
* testsuite/ld-i386/pr22929.s: Likewise.
* testsuite/ld-x86-64/pr22929.d: Likewise.
* testsuite/ld-x86-64/pr22929.s: Likewise.
For absolute symbols which are forced local or not dynamic, the ABS relocation
should be resolved at static linking time.
Originally, an RELATIVE/ABS relocation will be generated even for absolution
symbols for the dynamic linker to resolve.
bfd/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* elfnn-aarch64.c (elfNN_aarch64_final_link_relocate): Check absolute symbol,
and don't emit relocation in specific case.
ld/
2018-03-07 Renlin Li <renlin.li@arm.com>
PR ld/20402
* testsuite/ld-aarch64/aarch64-elf.exp: Run new test.
* testsuite/ld-aarch64/pr20402.s: New.
* testsuite/ld-aarch64/pr20402.d: New.
Currently, when `mips_elf_calculate_relocation' is asked to relocate an
undefined symbol, it reports an error or a warning and immediately
returns without performing the relocation. This is fine if the link
fails, but if unresolved_syms_in_objects == RM_GENERATE_WARNING, the
link will continue and output some unrelocated code, which is a
regression from commit e7e2196da3 ("MIPS/BFD: Correctly report
undefined relocations").
Fix this by continuing after calling the `undefined_symbol' hook unless
this is an error condition.
bfd/
PR ld/21900
* elfxx-mips.c (mips_elf_calculate_relocation): Only return
after calling `undefined_symbol' hook if this is an error
condition. Assume the value of 0 for the symbol requested
otherwise.
ld/
PR ld/21900
* testsuite/ld-mips-elf/undefined-warn.d: New test.
* testsuite/ld-mips-elf/undefined.s: Add padding at the end.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
PR 22895
PR 22893
* dwarf2.c (read_n_bytes): Replace size parameter with dwarf_block
pointer. Drop unused abfd parameter. Check the size of the block
before initialising the data field. Return the end pointer if the
size is invalid.
(read_attribute_value): Adjust invocations of read_n_bytes.
translate_symbol_table returns false on detecting an out of range name
string offset, hooray for error checking, but doesn't set bfd_error or
print a useful error. bfd_error therefore contains whatever it had
previously, in my testing, bfd_error_system_call. So the error
printed depended on errno.
PR 22887
* aoutx.h (translate_symbol_table): Print an error message and set
bfd_error on finding an invalid name string offset.
This patch adds --enable-separate-code to ld configure to turn on
-z separate-code by default and enables it by default for Linux/x86.
This avoids mixing code pages with data to improve cache performance
as well as security.
To reduce x86-64 executable and shared object sizes, the maximum page
size is reduced from 2MB to 4KB when -z separate-code is turned on by
default. Note: -z max-page-size= can be used to set the maximum page
size.
We compared SPEC CPU 2017 performance before and after this change on
Skylake server. There are no any significant performance changes.
Everything is mostly below +/-1%.
bfd/
* config.in: Regenerated.
* configure: Likewise.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED. Default
to 1 for Linux/x86 targets,
* elf64-x86-64.c (ELF_MAXPAGESIZE): Set to 0x1000 if
DEFAULT_LD_Z_SEPARATE_CODE is 1.
ld/
* NEWS: Mention --enable-separate-code.
* configure.ac: Add --enable-separate-code.
(DEFAULT_LD_Z_SEPARATE_CODE): New AC_DEFINE_UNQUOTED.
* configure.tgt: Default ac_default_ld_z_separate_code to 1 for
Linux/x86 targets.
* config.in: Regenerated.
* configure: Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse): Set
link_info.separate_code DEFAULT_LD_Z_SEPARATE_CODE.
A number of ARM tests show results like:
ld-new: no address assigned to the veneers output section .gnu.sgstubs
ld-new: can not size stub section: invalid operation
ld-new: warning: cannot find entry symbol _start; defaulting to 0000000000010074
ld-new: tmpdir/cmse-veneers-no-gnu_sgstubs: warning: allocated section `.text' not in segment
Segmentation fault
PASS: Secure gateway veneers: no .gnu.sgstubs section
The PASS despite the segv shows the danger of using "#..." to match
error output. This patch doesn't try to fix the testuite, but does
prevent the segfault.
* elf.c (assign_file_positions_except_relocs): Don't segfault
when actual number of phdrs is less than allocated. Delete
outdated comment. Formatting.
More standarization of error/warning messages. The ARM backend has
some multi-line error messages, which don't fit particularly well with
the GNU coding standard insistence that error messages shouldn't be
capitalized or have a full-stop. I've replaced the line breaks with
semicolons.
So for instance the following
system/path/to/ld: myobject.o: invalid special symbol `foo'.
system/path/to/ld: It must be a global or weak function symbol.
becomes
system/path/to/ld: myobject.o: invalid special symbol `foo'; it must be a global or weak function symbol
bfd/
* elf32-arm.c, * elfnn-aarch64.c: Standardize error/warning messages.
ld/
* testsuite/ld-aarch64/reloc-overflow-bad.d,
* testsuite/ld-arm/attr-merge-9.out,
* testsuite/ld-arm/attr-merge-arch-2.d,
* testsuite/ld-arm/attr-merge-unknown-1.d,
* testsuite/ld-arm/attr-merge-unknown-2.d,
* testsuite/ld-arm/attr-merge-unknown-2r.d,
* testsuite/ld-arm/attr-merge-unknown-3.d,
* testsuite/ld-arm/cmse-implib-errors.out,
* testsuite/ld-arm/cmse-new-earlier-later-implib.out,
* testsuite/ld-arm/cmse-new-implib-no-output.out,
* testsuite/ld-arm/cmse-new-implib-not-sg-in-implib.out,
* testsuite/ld-arm/cmse-new-implib.out,
* testsuite/ld-arm/cmse-new-wrong-implib.out,
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out,
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out,
* testsuite/ld-arm/group-relocs-alu-bad-2.d,
* testsuite/ld-arm/group-relocs-alu-bad.d,
* testsuite/ld-arm/group-relocs-ldc-bad-2.d,
* testsuite/ld-arm/group-relocs-ldc-bad.d,
* testsuite/ld-arm/group-relocs-ldr-bad-2.d,
* testsuite/ld-arm/group-relocs-ldr-bad.d,
* testsuite/ld-arm/group-relocs-ldrs-bad-2.d,
* testsuite/ld-arm/group-relocs-ldrs-bad.d,
* testsuite/ld-arm/stm32l4xx-cannot-fix-far-ldm.d: Update.
The GNU coding standard says error messages should be of the form
program:sourcefile:lineno: message
or
program: message
and
"The string message should not begin with a capital letter when it
follows a program name and/or file name, because that isn’t the
beginning of a sentence. (The sentence conceptually starts at the
beginning of the line.) Also, it should not end with a period."
This patch does that for ppc, and removes some British spelling.
I've also switched some error output from using the linker callback
einfo to _bfd_error_handler, due to improved compilation time
argument checking now done for the latter function.
bfd/
* elf32-ppc.c: Standardize error/warning messages. Use
_bfd_error_handler rather than einfo when einfo features not used.
* elf64-ppc.c: Likewise.
ld/
* testsuite/ld-powerpc/attr-gnu-12-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-12.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-13.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-21.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-23.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-31.d: Update.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Update.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Update.
As suggested in long ago in a galaxy far, far away [1], I tried
turning it on and it seems to work, as is evidenced by the Mesa
package in Debian/ia64. Please enable it with the following patch.
[1] https://sourceware.org/ml/binutils/2007-07/msg00241.html
bfd * elfnn-ia64.c (elf_backend_can_gc_sections): Enable.
