24fbeb8dc2
48 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gary Benson
|
0bfdf32fa1 |
Rename current_inferior as current_thread in gdbserver
GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise. |
||
|
Gary Benson
|
38e08fcac0 |
Straightforward fatal to internal_error conversions
This commit replaces most of the calls to fatal that represent internal errors with calls to internal_error, either directly or via gdb_assert and gdb_assert_not_reached. gdb/gdbserver/ChangeLog: * inferiors.c (get_thread_process): Replace check with gdb_assert. * linux-low.c (linux_wait_for_event_filtered): Replace fatal with internal_error. (linux_resume_one_lwp): Likewise. * linux-x86-low.c (x86_siginfo_fixup): Replace checks with gdb_assert. * mem-break.c (raw_bkpt_type_to_target_hw_bp_type): Replace fatal with internal_error. * regcache.c (get_thread_regcache): Replace check with gdb_assert. (init_register_cache): Replace fatal with gdb_assert_not_reached. (find_register_by_name): Replace fatal with internal_error. (find_regno): Likewise. * tdesc.c (init_target_desc): Replace check with gdb_assert. * thread-db.c (thread_db_create_event): Likewise. (thread_db_load_search): Likewise. (try_thread_db_load_1): Likewise. * tracepoint.c (get_jump_space_head): Replace fatal with internal_error. (claim_trampoline_space): Likewise. (have_fast_tracepoint_trampoline_buffer): Likewise. (cmd_qtstart): Likewise. (stop_tracing): Likewise. (fast_tracepoint_collecting): Likewise. (target_malloc): Likewise. (download_tracepoint): Likewise. (download_trace_state_variables): Replace check with gdb_assert. (upload_fast_traceframes): Replace fatal with internal_error. |
||
Joel Brobecker
|
ef7cab6ba1 |
gdbserver crash if the_target->supports_z_point_type is NULL
When debugging on LynxOS targets (and probably on SPU targets as well),
inserting a breakpoint and resuming the program's execution causes
GDBserver to crash.
The crash occurs while handling the Z0 packet sent by GDB to insert
our breakpoint, because z_type_supported calls
the_target->supports_z_point_type without checking that it is not NULL
This patch fixes the issue by making z_type_supported return false if
the_target->supports_z_point_type is NULL.
gdb/gdbserver/ChangeLog:
PR server/17023
* mem-break.c (z_type_supported): Return zero if
THE_TARGET->SUPPORTS_Z_POINT_TYPE is NULL.
Tested on ppx-lynx5.
|
||
Pedro Alves
|
0a261ed82e |
gdbserver: on GDB breakpoint reinsertion, also delete the breakpoint's commands.
If GDB decides to change the breakpoint's conditions or commands, it'll reinsert the same breakpoint again, with the new options attached, without deleting the previous breakpoint. E.g., (gdb) set breakpoint always-inserted on (gdb) b main if 0 Breakpoint 1 at 0x400594: file foo.c, line 21. Sending packet: $Z0,400594,1;X3,220027#68...Packet received: OK (gdb) b main Breakpoint 15 at 0x400594: file foo.c, line 21. Sending packet: $Z0,400594,1#49...Packet received: OK GDBserver understands this and deletes the breakpoint's previous conditions. But, it forgets to delete the previous commands. gdb/gdbserver/ 2014-06-02 Pedro Alves <palves@redhat.com> * ax.c (gdb_free_agent_expr): New function. * ax.h (gdb_free_agent_expr): New declaration. * mem-break.c (delete_gdb_breakpoint_1): Also clear the commands list. (clear_breakpoint_conditions, clear_breakpoint_commands): Make static. (clear_breakpoint_conditions_and_commands): New function. * mem-break.h (clear_breakpoint_conditions): Delete declaration. (clear_breakpoint_conditions_and_commands): New declaration. |
||
|
Pedro Alves
|
802e8e6d84 |
[GDBserver] Make Zx/zx packet handling idempotent.
This patch fixes hardware breakpoint regressions exposed by my fix for "PR breakpoints/7143 - Watchpoint does not trigger when first set", at https://sourceware.org/ml/gdb-patches/2014-03/msg00167.html The testsuite caught them on Linux/x86_64, at least. gdb.sum: gdb.sum: FAIL: gdb.base/hbreak2.exp: next over recursive call FAIL: gdb.base/hbreak2.exp: backtrace from factorial(5.1) FAIL: gdb.base/hbreak2.exp: continue until exit at recursive next test gdb.log: (gdb) next Program received signal SIGTRAP, Trace/breakpoint trap. factorial (value=4) at ../../../src/gdb/testsuite/gdb.base/break.c:113 113 if (value > 1) { /* set breakpoint 7 here */ (gdb) FAIL: gdb.base/hbreak2.exp: next over recursive call Actually, that patch just exposed a latent issue to "breakpoints always-inserted off" mode, not really caused it. After that patch, GDB no longer removes breakpoints at each internal event, thus making some scenarios behave like breakpoint always-inserted on. The bug is easy to trigger with always-inserted on. The issue is that since the target-side breakpoint conditions support, if the stub/server supports evaluating breakpoint conditions on the target side, then GDB is sending duplicate Zx packets to the target without removing them before, and GDBserver is not really expecting that for Z packets other than Z0/z0. E.g., with "set breakpoint always-inserted on" and "set debug remote 1": (gdb) b main Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) b main Note: breakpoint 4 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) b main Note: breakpoints 4 and 5 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z0,410943,1#48...Packet received: OK ^^^^^^^^^^^^ (gdb) del Delete all breakpoints? (y or n) y Sending packet: $Z0,410943,1#48...Packet received: OK Sending packet: $Z0,410943,1#48...Packet received: OK Sending packet: $z0,410943,1#68...Packet received: OK And for Z1, similarly: (gdb) hbreak main Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 4 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Packet Z1 (hardware-breakpoint) is supported (gdb) hbreak main Note: breakpoint 4 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 5 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ (gdb) hbreak main Note: breakpoints 4 and 5 also set at pc 0x410943. Sending packet: $m410943,1#ff...Packet received: 48 Hardware assisted breakpoint 6 at 0x410943: file ../../../src/gdb/gdbserver/server.c, line 3028. Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ (gdb) del Delete all breakpoints? (y or n) y Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Sending packet: $Z1,410943,1#49...Packet received: OK ^^^^^^^^^^^^ Sending packet: $z1,410943,1#69...Packet received: OK ^^^^^^^^^^^^ So GDB sent a bunch of Z1 packets, and then when finally removing the breakpoint, only one z1 packet was sent. On the GDBserver side (with monitor set debug-hw-points 1), in the Z1 case, we see: $ ./gdbserver :9999 ./gdbserver Process ./gdbserver created; pid = 8629 Listening on port 9999 Remote debugging from host 127.0.0.1 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=1 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=2 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=3 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 insert_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=5 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 remove_watchpoint (addr=410943, len=1, type=instruction-execute): CONTROL (DR7): 00000101 STATUS (DR6): 00000000 DR0: addr=0x410943, ref.count=4 DR1: addr=0x0, ref.count=0 DR2: addr=0x0, ref.count=0 DR3: addr=0x0, ref.count=0 That's one insert_watchpoint call for each Z1 packet, and then one remove_watchpoint call for the z1 packet. Notice how ref.count increased for each insert_watchpoint call, and then in the end, after GDB told GDBserver to forget about the hardware breakpoint, GDBserver ends with the the first debug register still with ref.count=4! IOW, the hardware breakpoint is left armed on the target, while on the GDB end it's gone. If the program happens to execute 0x410943 afterwards, then the CPU traps, GDBserver reports the trap to GDB, and GDB not having a breakpoint set at that address anymore, reports to the user a spurious SIGTRAP. This is exactly what is happening in the hbreak2.exp test, though in that case, it's a shared library event that triggers a breakpoint_re_set, when breakpoints are still inserted (because nowadays GDB doesn't remove breakpoints while handling internal events), and that recreates breakpoint locations, which likewise forces breakpoint reinsertion and Zx packet resends... That is a lot of bogus Zx duplication that should possibly be addressed on the GDB side. GDB resends Zx packets because the way to change the target-side condition, is to resend the breakpoint to the server with the new condition. (That's an option in the packet: e.g., "Z1,410943,1;X3,220027" for "hbreak main if 0". The packets in the examples above are shorter because the breakpoints don't have conditions attached). GDB doesn't remove the breakpoint first before reinserting it because that'd be bad for non-stop, as it'd open a window where the inferior could miss the breakpoint. The conditions actually haven't changed between the resends, but GDB isn't smart enough to realize that. (TBC, if the target doesn't support target-side conditions, then GDB doesn't trigger these resends (init_bp_location calls mark_breakpoint_location_modified, and that does nothing if condition evaluation is on the host side. The resends are caused by the 'loc->condition_changed = condition_modified.' line.) But, even if GDB was made smarter, GDBserver should really still handle the resends anyway. So target-side conditions also aren't really to blame. The documentation of the Z/z packets says: "To avoid potential problems with duplicate packets, the operations should be implemented in an idempotent way." As such, we may want to fix GDB, but we should definitely fix GDBserver. The fix is a prerequisite for target-side conditions on hardware breakpoints anyway (and while at it, on watchpoints too). GDBserver indeed already treats duplicate Z0 packets in an idempotent way. mem-break.c has the concept of high-level and low-level breakpoints, somewhat similar to GDB's split of breakpoints vs breakpoint locations, and keeps track of multiple breakpoints referencing the same address/location, for the case of an internal GDBserver breakpoint or a tracepoint being set at the same address as a GDB breakpoint. But, it only allows GDB to ever contribute one reference to a software breakpoint location. IOW, if gdbserver sees a Z0 packet for the same address where it already had a GDB breakpoint set, then GDBserver won't create another high-level GDB breakpoint. However, mem-break.c only tracks GDB Z0 breakpoints. The same logic should apply to all kinds of Zx packets. Currently, gdbserver passes down each duplicate Zx (other than Z0) request directly to the target->insert_point routine. The x86 watchpoint support itself refcounts watchpoint / hw breakpoint requests, to handle overlapping watchpoints, and save debug registers. But that code doesn't (and really shouldn't) handle the duplicate requests, assuming that for each insert there will be a corresponding remove. So the fix is to generalize mem-break.c to track all kinds of Zx breakpoints, and filter out duplicates. As mentioned, this ends up adding support for target-side conditions on hardware breakpoints and watchpoints too (though GDB itself doesn't support the latter yet). Probably the least obvious change in the patch is that it kind of turns the breakpoint insert/remove APIs inside out. Before, the target methods were only called for GDB breakpoints. The internal breakpoint set/delete methods inserted memory breakpoints directly bypassing the insert/remove target methods. That's not good when the target should use a debug API to set software breakpoints, instead of relying on GDBserver patching memory with breakpoint instructions, as is the case of NTO. Now removal/insertion of all kinds of breakpoints/watchpoints, either internal, or from GDB, always go through the target methods. The insert_point/remove_point methods no longer get passed a Z packet type, but an internal/raw breakpoint type. They're also passed a pointer to the raw breakpoint itself (note that's still opaque outside mem-break.c), so that insert_memory_breakpoint / remove_memory_breakpoint have access to the breakpoint's shadow buffer. I first tried passing down a new structure based on GDB's "struct bp_target_info" (actually with that name exactly), but then decided against it as unnecessary complication. As software/memory breakpoints work by poking at memory, when setting a GDB Z0 breakpoint (but not internal breakpoints, as those can assume the conditions are already right), we need to tell the target to prepare to access memory (which on Linux means stop threads). If that operation fails, we need to return error to GDB. Seeing an error, if this is the first breakpoint of that type that GDB tries to insert, GDB would then assume the breakpoint type is supported, but it may actually not be. So we need to check whether the type is supported at all before preparing to access memory. And to solve that, the patch adds a new target->supports_z_point_type method that is called before actually trying to insert the breakpoint. Other than that, hopefully the change is more or less obvious. New test added that exercises the hbreak2.exp regression in a more direct way, without relying on a breakpoint re-set happening before main is reached. Tested by building GDBserver for: aarch64-linux-gnu arm-linux-gnueabihf i686-pc-linux-gnu i686-w64-mingw32 m68k-linux-gnu mips-linux-gnu mips-uclinux nios2-linux-gnu powerpc-linux-gnu sh-linux-gnu tilegx-unknown-linux-gnu x86_64-redhat-linux x86_64-w64-mingw32 And also regression tested on x86_64 Fedora 20. gdb/gdbserver/ 2014-05-20 Pedro Alves <palves@redhat.com> * linux-aarch64-low.c (aarch64_insert_point) (aarch64_remove_point): No longer check whether the type is supported here. Adjust to new interface. (the_low_target): Install aarch64_supports_z_point_type as supports_z_point_type method. * linux-arm-low.c (raw_bkpt_type_to_arm_hwbp_type): New function. (arm_linux_hw_point_initialize): Take an enum raw_bkpt_type instead of a Z packet char. Adjust. (arm_supports_z_point_type): New function. (arm_insert_point, arm_remove_point): Adjust to new interface. (the_low_target): Install arm_supports_z_point_type. * linux-crisv32-low.c (cris_supports_z_point_type): New function. (cris_insert_point, cris_remove_point): Adjust to new interface. Don't check whether the type is supported here. (the_low_target): Install cris_supports_z_point_type. * linux-low.c (linux_supports_z_point_type): New function. (linux_insert_point, linux_remove_point): Adjust to new interface. * linux-low.h (struct linux_target_ops) <insert_point, remove_point>: Take an enum raw_bkpt_type instead of a char. Add raw_breakpoint pointer parameter. <supports_z_point_type>: New method. * linux-mips-low.c (mips_supports_z_point_type): New function. (mips_insert_point, mips_remove_point): Adjust to new interface. Use mips_supports_z_point_type. (the_low_target): Install mips_supports_z_point_type. * linux-ppc-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-s390-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-sparc-low.c (the_low_target): Install NULL as supports_z_point_type method. * linux-x86-low.c (x86_supports_z_point_type): New function. (x86_insert_point): Adjust to new insert_point interface. Use insert_memory_breakpoint. Adjust to new i386_low_insert_watchpoint interface. (x86_remove_point): Adjust to remove_point interface. Use remove_memory_breakpoint. Adjust to new i386_low_remove_watchpoint interface. (the_low_target): Install x86_supports_z_point_type. * lynx-low.c (lynx_target_ops): Install NULL as supports_z_point_type callback. * nto-low.c (nto_supports_z_point_type): New. (nto_insert_point, nto_remove_point): Adjust to new interface. (nto_target_ops): Install nto_supports_z_point_type. * mem-break.c: Adjust intro comment. (struct raw_breakpoint) <raw_type, size>: New fields. <inserted>: Update comment. <shlib_disabled>: Delete field. (enum bkpt_type) <gdb_breakpoint>: Delete value. <gdb_breakpoint_Z0, gdb_breakpoint_Z1, gdb_breakpoint_Z2, gdb_breakpoint_Z3, gdb_breakpoint_Z4>: New values. (raw_bkpt_type_to_target_hw_bp_type): New function. (find_enabled_raw_code_breakpoint_at): New function. (find_raw_breakpoint_at): New type and size parameters. Use them. (insert_memory_breakpoint): New function, based off set_raw_breakpoint_at. (remove_memory_breakpoint): New function. (set_raw_breakpoint_at): Reimplement. (set_breakpoint): New, based on set_breakpoint_at. (set_breakpoint_at): Reimplement. (delete_raw_breakpoint): Go through the_target->remove_point instead of assuming memory breakpoints. (find_gdb_breakpoint_at): Delete. (Z_packet_to_bkpt_type, Z_packet_to_raw_bkpt_type): New functions. (find_gdb_breakpoint): New function. (set_gdb_breakpoint_at): Delete. (z_type_supported): New function. (set_gdb_breakpoint_1): New function, loosely based off set_gdb_breakpoint_at. (check_gdb_bp_preconditions, set_gdb_breakpoint): New functions. (delete_gdb_breakpoint_at): Delete. (delete_gdb_breakpoint_1): New function, loosely based off delete_gdb_breakpoint_at. (delete_gdb_breakpoint): New function. (clear_gdb_breakpoint_conditions): Rename to ... (clear_breakpoint_conditions): ... this. Don't handle a NULL breakpoint. (add_condition_to_breakpoint): Make static. (add_breakpoint_condition): Take a struct breakpoint pointer instead of an address. Adjust. (gdb_condition_true_at_breakpoint): Rename to ... (gdb_condition_true_at_breakpoint_z_type): ... this, and add z_type parameter. (gdb_condition_true_at_breakpoint): Reimplement. (add_breakpoint_commands): Take a struct breakpoint pointer instead of an address. Adjust. (gdb_no_commands_at_breakpoint): Rename to ... (gdb_no_commands_at_breakpoint_z_type): ... this. Add z_type parameter. Return true if no breakpoint was found. Change debug output. (gdb_no_commands_at_breakpoint): Reimplement. (run_breakpoint_commands): Rename to ... (run_breakpoint_commands_z_type): ... this. Add z_type parameter, and change return type to boolean. (run_breakpoint_commands): New function. (gdb_breakpoint_here): Also check for Z1 breakpoints. (uninsert_raw_breakpoint): Don't try to reinsert a disabled breakpoint. Go through the_target->remove_point instead of assuming memory breakpoint. (uninsert_breakpoints_at, uninsert_all_breakpoints): Uninsert software and hardware breakpoints. (reinsert_raw_breakpoint): Go through the_target->insert_point instead of assuming memory breakpoint. (reinsert_breakpoints_at, reinsert_all_breakpoints): Reinsert software and hardware breakpoints. (check_breakpoints, breakpoint_here, breakpoint_inserted_here): Check both software and hardware breakpoints. (validate_inserted_breakpoint): Assert the breakpoint is a software breakpoint. Set the inserted flag to -1 instead of setting shlib_disabled. (delete_disabled_breakpoints): Adjust. (validate_breakpoints): Only validate software breakpoints. Adjust to inserted flag change. (check_mem_read, check_mem_write): Skip breakpoint types other than software breakpoints. Adjust to inserted flag change. * mem-break.h (enum raw_bkpt_type): New enum. (raw_breakpoint, struct process_info): Forward declare. (Z_packet_to_target_hw_bp_type): Delete declaration. (raw_bkpt_type_to_target_hw_bp_type, Z_packet_to_raw_bkpt_type) (set_gdb_breakpoint, delete_gdb_breakpoint) (clear_breakpoint_conditions): New declarations. (set_gdb_breakpoint_at, clear_gdb_breakpoint_conditions): Delete. (breakpoint_inserted_here): Update comment. (add_breakpoint_condition, add_breakpoint_commands): Replace address parameter with a breakpoint pointer parameter. (gdb_breakpoint_here): Update comment. (delete_gdb_breakpoint_at): Delete. (insert_memory_breakpoint, remove_memory_breakpoint): Declare. * server.c (process_point_options): Take a struct breakpoint pointer instead of an address. Adjust. (process_serial_event) <Z/z packets>: Use set_gdb_breakpoint and delete_gdb_breakpoint. * spu-low.c (spu_target_ops): Install NULL as supports_z_point_type method. * target.h: Include mem-break.h. (struct target_ops) <prepare_to_access_memory>: Update comment. <supports_z_point_type>: New field. <insert_point, remove_point>: Take an enum raw_bkpt_type argument instead of a char. Also take a raw breakpoint pointer. * win32-arm-low.c (the_low_target): Install NULL as supports_z_point_type. * win32-i386-low.c (i386_supports_z_point_type): New function. (i386_insert_point, i386_remove_point): Adjust to new interface. (the_low_target): Install i386_supports_z_point_type. * win32-low.c (win32_supports_z_point_type): New function. (win32_insert_point, win32_remove_point): Adjust to new interface. (win32_target_ops): Install win32_supports_z_point_type. * win32-low.h (struct win32_target_ops): <supports_z_point_type>: New method. <insert_point, remove_point>: Take an enum raw_bkpt_type argument instead of a char. Also take a raw breakpoint pointer. gdb/testsuite/ 2014-05-20 Pedro Alves <palves@redhat.com> * gdb.base/break-idempotent.c: New file. * gdb.base/break-idempotent.exp: New file. |
||
|
Pedro Alves
|
932539e3ab |
[GDBserver] Move Z packet defines and type convertion routines to shared code.
The Aarch64, MIPS and x86 Linux backends all have Z packet number defines and corresponding protocol number to internal type convertion routines. Factor them all out to gdbserver's core code, so we only have one shared copy. Tested on x86_64 Fedora 20, and also cross built for aarch64-linux-gnu and mips-linux-gnu. gdb/gdbserver/ 2014-05-20 Pedro Alves <palves@redhat.com> * mem-break.h: Include break-common.h. (Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP) (Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): New defines. (Z_packet_to_target_hw_bp_type): New declaration. * mem-break.c (Z_packet_to_target_hw_bp_type): New function. * i386-low.c (Z_PACKET_HW_BP, Z_PACKET_WRITE_WP, Z_PACKET_READ_WP) (Z_PACKET_ACCESS_WP): Delete macros. (Z_packet_to_hw_type): Delete function. * i386-low.h: Don't include break-common.h here. (Z_packet_to_hw_type): Delete declaration. * linux-x86-low.c (x86_insert_point, x86_insert_point): Call Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type. * win32-i386-low.c (i386_insert_point, i386_remove_point): Call Z_packet_to_target_hw_bp_type instead of Z_packet_to_hw_type. * linux-aarch64-low.c: Don't include break-common.h here. (Z_PACKET_SW_BP, Z_PACKET_HW_BP, Z_PACKET_WRITE_WP) (Z_PACKET_READ_WP, Z_PACKET_ACCESS_WP): Delete macros. (Z_packet_to_target_hw_bp_type): Delete function. * linux-mips-low.c (rsp_bp_type_to_target_hw_bp_type): Delete function. (mips_insert_point, mips_remove_point): Use Z_packet_to_target_hw_bp_type. |
||
|
Pedro Alves
|
51aa91f979 |
[gdbserver] mem-break.c:find_gdb_breakpoint_at: Make static.
Nothing calls this outside mem-break.c. gdb/gdbserver/ 2014-04-23 Pedro Alves <palves@redhat.com> * mem-break.c (find_gdb_breakpoint_at): Make static. * mem-break.h (find_gdb_breakpoint_at): Delete declaration. |
||
|
Pedro Alves
|
d708bcd102 |
Conditional Z1 breakpoint hangs GDBserver.
While trying to fix hbreak2.exp against GDBserver I noticed this... (gdb) hbreak main if 1 Sending packet: $m400580,40#2e...Packet received: e8d2ffffff5dc3554889e54883ec10c745fc00000000eb0eb800000000e8c1ffffff8345fc01817dfce70300007ee9b800000000c9c3662e0f1f840000000000 Sending packet: $m40058f,1#31...Packet received: c7 Hardware assisted breakpoint 1 at 0x40058f: file ../../../src/gdb/testsuite/gdb.base/break-idempotent.c, line 46. Sending packet: $Z1,40058f,1;X3,220127#9b... *hangs forever* The issue is that nothing advances the packet pointer if add_breakpoint_condition either fails to parse the agent expression, or fails to find the breakpoint, resulting in an infinite loop in process_point_options. The latter case should really be fixed by GDBserver tracking GDB Z1 breakpoints in its breakpoint structures like Z0 breakpoints are, but the latter case still needs handling. add_breakpoint_commands has the same issue, though at present I don't know any way to trigger it other than sending a manually cooked packet. Unbelievably, it doesn't look like we have any test that tries setting a conditional hardware breakpoint. Looking at cond-eval-mode.exp, it looks like the file was meant to actually test something, but it's mostly empty today. This patch adds tests that tries all sorts of conditional breakpoints and watchpoints. The test hangs/fails without the GDBserver fix. Tested on x86_64 Fedora 17. gdb/gdbserver/ 2014-04-10 Pedro Alves <palves@redhat.com> * mem-break.c (add_breakpoint_condition, add_breakpoint_commands): Check if the condition or command is NULL before checking if the breakpoint is known. On success, return true. * mem-break.h (add_breakpoint_condition): Document return. (add_breakpoint_commands): Add describing comment. * server.c (skip_to_semicolon): New function. (process_point_options): Use it. gdb/testsuite/ 2014-04-10 Pedro Alves <palves@redhat.com> * gdb.base/cond-eval-mode.c: New file. * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust prepare_for_testing to build the new file. Check result of runto_main. (test_break, test_watch): New procedures. (top level): Use them. |
||
Doug Evans
|
87ce2a04c5 |
New gdbserver option --debug-format=timestamp.
* NEWS: Mention it. gdbserver/ * configure.ac (AC_CHECK_FUNCS): Add test for gettimeofday. * configure: Regenerate. * config.in: Regenerate. * Makefile.in (SFILES): Add debug.c. (OBS): Add debug.o. * debug.c: New file. * debug.h: New file. * linux-aarch64-low.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * linux-arm-low.c (*): Ditto. * linux-cris-low.c (*): Ditto. * linux-crisv32-low.c (*): Ditto. * linux-m32r-low.c (*): Ditto. * linux-sparc-low.c (*): Ditto. * linux-x86.c (*): Ditto. * linux-low.c (*): Ditto. (linux_wait_1): Add calls to debug_enter, debug_exit. (linux_wait): Remove redundant debugging printf. (stop_all_lwps): Add calls to debug_enter, debug_exit. (linux_resume, unstop_all_lwps): Ditto. * mem-break.c (*): Update all debugging printfs to use debug_printf instead of fprintf. * remote-utils.c (*): Ditto. * thread-db.c (*): Ditto. * server.c #include <ctype.h>, "gdb_vecs.h". (debug_threads): Moved to debug.c. (*): Update all debugging printfs to use debug_printf instead of fprintf. (start_inferior): Replace call to fflush with call to debug_flush. (monitor_show_help): Mention set debug-format. (parse_debug_format_options): New function. (handle_monitor_command): Handle "monitor set debug-format". (gdbserver_usage): Mention --debug-format. (main): Parse --debug-format. * server.h (debug_threads): Declaration moved to debug.h. #include "debug.h". * tracepoint.c (trace_debug_1) [!IN_PROCESS_AGENT]: Add version of trace_debug_1 that uses debug_printf. (tracepoint_look_up_symbols): Update all debugging printfs to use debug_printf instead of fprintf. doc/ * gdb.texinfo (Server): Mention --debug-format=all|none|timestamp. (gdbserver man): Ditto. testsuite/ * gdb.server/server-mon.exp: Add tests for "set debug-format". |
||
|
Joel Brobecker
|
ecd75fc8ee | Update Copyright year range in all files maintained by GDB. | ||
Yao Qi
|
5ae4861a11 |
gdb/gdbserver:
* ax.h (struct eval_agent_expr_context): New. (gdb_eval_agent_expr): Update declaration. * ax.c (gdb_eval_agent_expr): Remove argument REGCACHE and TFRAME. Add new argument CTX. * server.h (struct eval_agent_expr_context): Declare. (agent_mem_read, agent_tsv_read): Update declaration. (agent_mem_read_string): Likewise. * tracepoint.c (eval_tracepoint_agent_expr): Remove. (add_traceframe_block): Add new argument TPOINT. Increase TPOINT->traceframe_usage. (do_action_at_tracepoint): Call gdb_eval_agent_expr instead of eval_tracepoint_agent_expr. (condition_true_at_tracepoint): Likewise. (agent_mem_read): Remove argument TFRAME. Add argument CTX. (agent_mem_read_string, agent_tsv_read): Likewise. Callers update. gdb/testsuite: * gdb.trace/infotrace.exp: Check 'traceframe usage' in the output of 'info tracepoints'. * gdb.trace/disconnected-tracing.exp (disconnected_tracing): Likewise. * gdb.trace/tstatus.exp (run_trace_experiment): Likewise. * gdb.trace/disconnected-tracing.c (struct foo): New. |
||
Joel Brobecker
|
28e7fd6234 |
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
|
||
|
Doug Evans
|
657c4e8cc6 |
(gdb_no_commands_at_breakpoint): Tweak previous patch for win64 where
sizeof (long) < sizeof (void*). |
||
|
Doug Evans
|
7f216e7c7c |
* mem-break.c (gdb_no_commands_at_breakpoint): Fix cast from
pointer to int. |
||
Stan Shebs
|
d3ce09f5bf |
Add target-side support for dynamic printf.
* NEWS: Mention the additional style. * breakpoint.h (struct bp_target_info): New fields tcommands, persist. (struct bp_location): New field cmd_bytecode. * breakpoint.c: Include format.h. (disconnected_dprintf): New global. (parse_cmd_to_aexpr): New function. (build_target_command_list): New function. (insert_bp_location): Call it. (remove_breakpoints_pid): Skip dprintf breakpoints. (print_one_breakpoint_location): Ditto. (dprintf_style_agent): New global. (dprintf_style_enums): Add dprintf_style_agent. (update_dprintf_command_list): Add agent case. (agent_printf_command): New function. (_initialize_breakpoint): Add new commands. * common/ax.def (printf): New bytecode. * ax.h (ax_string): Declare. * ax-gdb.h (gen_printf): Declare. * ax-gdb.c: Include cli-utils.h, format.h. (gen_printf): New function. (maint_agent_print_command): New function. (_initialize_ax_gdb): Add maint agent-printf command. * ax-general.c (ax_string): New function. (ax_print): Add printf disassembly. * Makefile.in (SFILES): Add format.c (COMMON_OBS): Add format.o. * common/format.h: New file. * common/format.c: New file. * printcmd.c: Include format.h. (ui_printf): Call parse_format_string. * remote.c (remote_state): New field breakpoint_commands. (PACKET_BreakpointCommands): New enum. (remote_breakpoint_commands_feature): New function. (remote_protocol_features): Add new BreakpointCommands entry. (remote_can_run_breakpoint_commands): New function. (remote_add_target_side_commands): New function. (remote_insert_breakpoint): Call it. (remote_insert_hw_breakpoint): Ditto. (_initialize_remote): Add new packet configuration for target-side breakpoint commands. * target.h (struct target_ops): New field to_can_run_breakpoint_commands. (target_can_run_breakpoint_commands): New macro. * target.c (update_current_target): Handle to_can_run_breakpoint_commands. [gdbserver] * Makefile.in (WARN_CFLAGS_NO_FORMAT): Define. (ax.o): Add it to build rule. (ax-ipa.o): Ditto. (OBS): Add format.o. (IPA_OBS): Add format.o. * server.c (handle_query): Claim support for breakpoint commands. (process_point_options): Add command case. (process_serial_event): Leave running if there are printfs in effect. * mem-break.h (any_persistent_commands): Declare. (add_breakpoint_commands): Declare. (gdb_no_commands_at_breakpoint): Declare. (run_breakpoint_commands): Declare. * mem-break.c (struct point_command_list): New struct. (struct breakpoint): New field command_list. (any_persistent_commands): New function. (add_commands_to_breakpoint): New function. (add_breakpoint_commands): New function. (gdb_no_commands_at_breakpoint): New function. (run_breakpoint_commands): New function. * linux-low.c (linux_wait_1): Test for and run breakpoint commands locally. * ax.c: Include format.h. (ax_printf): New function. (gdb_eval_agent_expr): Add printf opcode. [doc] * gdb.texinfo (Dynamic Printf): Mention agent style and disconnected dprintf. (Maintenance Commands): Describe maint agent-printf. (General Query Packets): Mention BreakpointCommands feature. (Packets): Document commands extension to Z0 packet. * agentexpr.texi (Bytecode Descriptions): Document printf bytecode. [testsuite] * gdb.base/dprintf.exp: Add agent style tests. |
||
Luis Machado
|
412c89dd53 |
2012-02-25 Luis Machado <lgustavo@codesourcery.com>
* mem-break.c (clear_gdb_breakpoint_conditions): Fix de-allocation of conditions. |
||
|
Luis Machado
|
9f3a5c850e |
2012-02-24 Luis Machado <lgustavo@codesourcery>
* server.c (handle_query): Advertise support for target-side breakpoint condition evaluation. (process_point_options): New function. (process_serial_event): When inserting a breakpoint, check for a target-side condition that should be evaluated. * mem-break.c: Include regcache.h and ax.h. (point_cond_list_t): New data structure. (breakpoint) <cond_list>: New field. (find_gdb_breakpoint_at): Make non-static. (delete_gdb_breakpoint_at): Clear any target-side conditions. (clear_gdb_breakpoint_conditions): New function. (add_condition_to_breakpoint): Likewise. (add_breakpoint_condition): Likewise. (gdb_condition_true_at_breakpoint): Likewise. (gdb_breakpoint_here): Return result directly instead of going through a local variable. * mem-break.h (find_gdb_breakpoint_at): New prototype. (clear_gdb_breakpoint_conditions): Likewise. (add_breakpoint_condition): Likewise. (gdb_condition_true_at_breakpoint): Likewise. * linux-low.c (linux_wait_1): Evaluate target-side breakpoint condition. (need_step_over_p): Take target-side breakpoint condition into consideration. |
||
|
Joel Brobecker
|
0b30217134 |
Copyright year update in most files of the GDB Project.
gdb/ChangeLog:
Copyright year update in most files of the GDB Project.
|
||
Jan Kratochvil
|
6bf36717da |
gdb/gdbserver/
Fix overlapping memcpy. * mem-break.c (set_raw_breakpoint_at): New variable buf. Use it for the read_inferior_memory transfer. (delete_fast_tracepoint_jump): New variable buf. Use it for the write_inferior_memory transfer. (set_fast_tracepoint_jump): New variable buf. Use it for the read_inferior_memory and write_inferior_memory transfers. (uninsert_fast_tracepoint_jumps_at, reinsert_fast_tracepoint_jumps_at) (delete_raw_breakpoint, uninsert_raw_breakpoint): New variable buf. Use it for the write_inferior_memory transfer. (check_mem_read, check_mem_write): New gdb_asserts for overlapping buffers. |
||
|
Yao Qi
|
5c73ff4ec2 |
* mem-break.c (inc_ref_fast_tracepoint_jump): New.
* mem-break.h: Declare. * tracepoint.c (cmd_qtstart): Move some code to ... (clone_fast_tracepoint, install_fast_tracepoint): ... here. New. (download_tracepoints): Move some code to ... (download_tracepoint_1): ... here. New. |
||
|
Pedro Alves
|
b9fd179153 |
2011-10-31 Pedro Alves <pedro@codesourcery.com>
gdb/gdbserver/
* mem-break.c (check_mem_write): Add `myaddr' parameter. Don't
clobber the breakpoints' shadows with fast tracepoint jumps.
* mem-break.h (check_mem_write): Add `myaddr' parameter.
* target.c (write_inferior_memory): Also pass MYADDR down to
check_mem_write.
gdb/testsuite/
* gdb.trace/trace-break.c: New.
* gdb.trace/trace-break.exp: New.
|
||
Michael Snyder
|
493e2a69a4 |
2011-01-05 Michael Snyder <msnyder@msnyder-server.eng.vmware.com>
* gdbreplay.c: Shorten lines of >= 80 columns. * linux-low.c: Ditto. * linux-ppc-low.c: Ditto. * linux-s390-low.c: Ditto. * linux-sparc-low.c: Ditto. * linux-x86-low.c: Ditto. * linux-xtensa-low.c: Ditto. * mem-break.c: Ditto. * nto-low.c: Ditto. * regcache.h: Ditto. * remote-utils.c: Ditto. * server.c: Ditto. * server.h: Ditto. * thread-db.c: Ditto. * tracepoint.c: Ditto. * utils.c: Ditto. * win32-low.h: Ditto. |
||
|
Joel Brobecker
|
7b6bb8daac | run copyright.sh for 2011. | ||
gdbadmin
|
a778ab81e8 |
[gdbserver] Move malloc.h include to server.h.
This patch moves all includes of malloc.h, which were introduced
purely to get access to alloca's declaration, to server.h, next
to the include of alloca.h.
There is one exception: gdbreplay.c, which does not include server.h.
In this case, the include of alloca.h was simply moved up a bit, next
to the include of malloc.h.
gdb/gdbserver/ChangeLog:
* gdbreplay.c: Move include of alloca.h up, next to include of
malloc.h.
* server.h: Add include of malloc.h.
* mem-break.c: Remove include of malloc.h.
* server.c, tracepoint.c, utils.c, win32-low.c: Likewise.
|
||
|
Pedro Alves
|
331e2f5f98 | * mem-break.c [HAVE_MALLOC_H]: Include malloc.h. | ||
|
Pedro Alves
|
0fb4aa4bfc |
Static tracepoints support, and UST integration.
gdb/gdbserver/ * configure.ac: Handle --with-ust. substitute ustlibs and ustinc. * mem-break.c (uninsert_all_breakpoints) (reinsert_all_breakpoints): New. * mem-break.h (reinsert_all_breakpoints, uninsert_all_breakpoints): * tracepoint.c (ust_loaded, helper_thread_id, cmd_buf): New. (gdb_agent_ust_loaded, helper_thread_id) (gdb_agent_helper_thread_id): New macros. (struct ipa_sym_addresses): Add addr_ust_loaded, addr_helper_thread_id, addr_cmd_buf. (symbol_list): Add ust_loaded, helper_thread_id, cmd_buf. (in_process_agent_loaded_ust): New. (write_e_ust_not_loaded): New. (maybe_write_ipa_ust_not_loaded): New. (struct collect_static_trace_data_action): New. (enum tracepoint_type) <static_tracepoint>: New. (struct tracepoint) <handle>: Mention static tracepoints. (struct static_tracepoint_ctx): New. (CMD_BUF_SIZE): New. (add_tracepoint_action): Handle static tracepoint actions. (unprobe_marker_at): New. (clear_installed_tracepoints): Handle static tracepoints. (cmd_qtdp): Handle static tracepoints. (probe_marker_at): New. (cmd_qtstart): Handle static tracepoints. (response_tracepoint): Handle static tracepoints. (cmd_qtfstm, cmd_qtsstm, cmd_qtstmat): New. (handle_tracepoint_query): Handle qTfSTM, qTsSTM and qTSTMat. (get_context_regcache): Handle static tracepoints. (do_action_at_tracepoint): Handle static tracepoint actions. (traceframe_find_block_type): Handle static trace data blocks. (traceframe_read_sdata): New. (download_tracepoints): Download static tracepoint actions. [HAVE_UST] Include ust/ust.h, dlfcn.h, sys/socket.h, and sys/un.h. (GDB_PROBE_NAME): New. (ust_ops): New. (GET_UST_SYM): New. (USTF): New. (dlsym_ust): New. (ust_marker_to_static_tracepoint): New. (gdb_probe): New. (collect_ust_data_at_tracepoint): New. (gdb_ust_probe): New. (UNIX_PATH_MAX, SOCK_DIR): New. (gdb_ust_connect_sync_socket): New. (resume_thread, stop_thread): New. (run_inferior_command): New. (init_named_socket): New. (gdb_ust_socket_init): New. (cstr_to_hexstr): New. (next_st): New. (first_marker, next_marker): New. (response_ust_marker): New. (cmd_qtfstm, cmd_qtsstm): New. (unprobe_marker_at, probe_marker_at): New. (cmd_qtstmat, gdb_ust_thread): New. (gdb_ust_init): New. (initialize_tracepoint_ftlib): Call gdb_ust_init. * linux-amd64-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (x86_64_st_collect_regmap): New. (X86_64_NUM_ST_COLLECT_GREGS): New. (AMD64_RIP_REGNUM): New. (supply_static_tracepoint_registers): New. * linux-i386-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (i386_st_collect_regmap): New. (i386_NUM_ST_COLLECT_GREGS): New. (supply_static_tracepoint_registers): New. * server.c (handle_query): Handle qXfer:statictrace:read. <qSupported>: Report support for StaticTracepoints, and qXfer:statictrace:read features. * server.h (traceframe_read_sdata) (supply_static_tracepoint_registers): Declare. * remote-utils.c (convert_int_to_ascii, hexchars, ishex, tohex) (unpack_varlen_hex): Include in IPA build. * Makefile.in (ustlibs, ustinc): New. (IPA_OBJS): Add remote-utils-ipa.o. ($(IPA_LIB)): Link -ldl and -lpthread. (UST_CFLAGS): New. (IPAGENT_CFLAGS): Add UST_CFLAGS. * config.in, configure: Regenerate. gdb/ * NEWS: Mention new support for static tracepoints. (New packets): Mention qTfSTM, qTsSTM, qTSTMat and qXfer:statictrace:read. (New features in the GDB remote stub, GDBserver): Mention static tracepoints support using an UST based backend. (New commands): Mention "info static-tracepoint-markers" and "strace". * breakpoint.c (is_marker_spec): New. (is_tracepoint): Handle static tracepoints. (validate_commands_for_breakpoint): Static tracepoints can't do while-stepping. (static_tracepoints_here): New. (bpstat_what): Handle static tracepoints. (print_one_breakpoint_location, allocate_bp_location, mention): Ditto. (create_breakpoint_sal): Ditto. (decode_static_tracepoint_spec): New. (create_breakpoint): Replace `hardwareflag', and `traceflag' with `type_wanted'. Adjust. Handle static tracepoint marker locations. (break_command_1): Adjust. (update_static_tracepoint): New. (update_breakpoint_locations): Handle static tracepoints. (breakpoint_re_set_one): Handle static tracepoint marker locations. (disable_command, enable_command): Handle static tracepoints. (trace_command, ftrace_command): Adjust. (strace_command): New. (create_tracepoint_from_upload): Adjust. (save_breakpoints): Handle static tracepoints. (_initialize_breakpoint): Install the "strace" command. * breakpoint.h (enum bptype): New bp_static_tracepoint type. (struct breakpoint): New fields static_trace_marker_id and static_trace_marker_id_idx. (breakpoints_here_p): Declare. (create_breakpoint): Adjust. (static_tracepoints_here): Declare. * remote.c (struct remote_state) <static_tracepoints>: New field. (PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New. (remote_static_tracepoint_marker_at): New. (remote_static_tracepoint_markers_by_strid): New. (remote_static_tracepoint_feature): New. (remote_disconnected_tracing_feature): Handle "StaticTracepoints". (remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA. (remote_supports_static_tracepoints): New. (remote_download_tracepoint): Download static tracepoints. (init_remote_ops): Install remote_static_tracepoint_marker_at and remote_static_tracepoint_markers_by_strid. (_initialize_remote): Install set|show remote static-tracepoints, and set|show remote read-sdata-object commands. * target.c (update_current_target): Inherit and default to_static_tracepoint_marker_at, and to_static_tracepoint_markers_by_strid. * target.h (static_tracepoint_marker): Forward declare. (enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA. (static_tracepoint_marker_p): New typedef. (DEF_VEC_P(static_tracepoint_marker_p)): New VEC type. (struct target_ops): New fields to_static_tracepoint_marker_at and to_static_tracepoint_markers_by_strid. (target_static_tracepoint_marker_at) (target_static_tracepoint_markers_by_strid): New. * tracepoint.c: Include source.h. (validate_actionline): Handle $_sdata. (struct collection_list): New field strace_data. (add_static_trace_data): New. (clear_collection_list): Clear strace_data. (stringify_collection_list): Account for a possible static trace data collection. (encode_actions_1): Encode an $_sdata collection. (parse_tracepoint_definition): Handle static tracepoints. (parse_static_tracepoint_marker_definition): New. (release_static_tracepoint_marker): New. (print_one_static_tracepoint_marker): New. (info_static_tracepoint_markers_command): New. (sdata_make_value): New. (_initialize_tracepoint): Create the $_sdata convenience variable. Add the "info static-tracepoint-markers" command. Mention $_sdata in the "collect" command's help output. * tracepoint.h (struct static_tracepoint_marker): New. (parse_static_tracepoint_marker_definition) (release_static_tracepoint_marker): Declare. * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust. * python/py-breakpoint.c (bppy_new): Adjust. doc/ * gdb.texinfo (Convenience Variables): Document $_sdata. (Commands to Set Tracepoints): Describe static tracepoints. Add `Listing Static Tracepoint Markers' menu entry. Document "strace". (Tracepoint Action Lists): Document collecting $_sdata. (Listing Static Tracepoint Markers): New subsection. (Tracepoints support in gdbserver): Mention static tracepoints. (remote packets, enabling and disabling): Mention read-sdata-object. (General Query Packets) <qSupported>: Document qXfer:sdata:read and StaticTracepoint. Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets. Document qXfer:sdata:read. (Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat. |
||
|
Pedro Alves
|
fa593d66d5 |
gdb/gdbserver/
2010-06-01 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> * Makefile.in (IPA_DEPFILES, extra_libraries): New. (all): Depend on $(extra_libraries). (install-only): Install the IPA. (IPA_OBJS, IPA_LIB): New. (clean): Remove the IPA lib. (IPAGENT_CFLAGS): New. (tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o) (regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o) (linux-amd64-ipa.o, amd64-linux-ipa.o): New rules. * linux-amd64-ipa.c, linux-i386-ipa.c: New files. * configure.ac: Check for atomic builtins support in the compiler. (IPA_DEPFILES, extra_libraries): Define. * configure.srv (ipa_obj): Add description. (ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define. (i[34567]86-*-linux*): Set ipa_obj. (x86_64-*-linux*): Set ipa_obj. * linux-low.c (stabilizing_threads): New. (supports_fast_tracepoints): New. (linux_detach): Stabilize threads before detaching. (handle_tracepoints): Handle internal tracing breakpoints. Assert the lwp is either not stabilizing, or is moving out of a jump pad. (linux_fast_tracepoint_collecting): New. (maybe_move_out_of_jump_pad): New. (enqueue_one_deferred_signal): New. (dequeue_one_deferred_signal): New. (linux_wait_for_event_1): If moving out of a jump pad, defer pending signals to later. (linux_stabilize_threads): New. (linux_wait_1): Check if threads need moving out of jump pads, and do it if so. (stuck_in_jump_pad_callback): New. (move_out_of_jump_pad_callback): New. (lwp_running): New. (linux_resume_one_lwp): Handle moving out of jump pads. (linux_set_resume_request): Dequeue deferred signals. (need_step_over_p): Also step over fast tracepoint jumps. (start_step_over): Also uninsert fast tracepoint jumps. (finish_step_over): Also reinsert fast tracepoint jumps. (linux_install_fast_tracepoint_jump): New. (linux_target_ops): Install linux_stabilize_threads and linux_install_fast_tracepoint_jump_pad. * linux-low.h (linux_target_ops) <get_thread_area, install_fast_tracepoint_jump_pad>: New fields. (struct lwp_info) <collecting_fast_tracepoint, pending_signals_to_report, exit_jump_pad_bkpt>: New fields. (linux_get_thread_area): Declare. * linux-x86-low.c (jump_insn): New. (x86_get_thread_area): New. (append_insns): New. (push_opcode): New. (amd64_install_fast_tracepoint_jump_pad): New. (i386_install_fast_tracepoint_jump_pad): New. (x86_install_fast_tracepoint_jump_pad): New. (the_low_target): Install x86_get_thread_area and x86_install_fast_tracepoint_jump_pad. * mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory. (struct fast_tracepoint_jump): New. (fast_tracepoint_jump_insn): New. (fast_tracepoint_jump_shadow): New. (find_fast_tracepoint_jump_at): New. (fast_tracepoint_jump_here): New. (delete_fast_tracepoint_jump): New. (set_fast_tracepoint_jump): New. (uninsert_fast_tracepoint_jumps_at): New. (reinsert_fast_tracepoint_jumps_at): New. (set_breakpoint_at): Use write_inferior_memory. (uninsert_raw_breakpoint): Use write_inferior_memory. (check_mem_read): Mask out fast tracepoint jumps. (check_mem_write): Mask out fast tracepoint jumps. * mem-break.h (struct fast_tracepoint_jump): Forward declare. (set_fast_tracepoint_jump): Declare. (delete_fast_tracepoint_jump) (fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Declare. * regcache.c: Don't compile many functions when building the in-process agent library. (init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating the register buffer in the heap. (free_register_cache): If the register buffer isn't owned by the regcache, don't free it. (set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate pre-existing register caches. * remote-utils.c (convert_int_to_ascii): Constify `from' parameter type. (convert_ascii_to_int): : Constify `from' parameter type. (decode_M_packet, decode_X_packet): Replace the `to' parameter by a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc the needed buffer in-place. (relocate_instruction): New. * server.c (handle_query) <qSymbols>: If the target supports tracepoints, give it a chance of looking up symbols. Report support for fast tracepoints. (handle_status): Stabilize threads. (process_serial_event): Adjust. * server.h (struct fast_tracepoint_jump): Forward declare. (struct process_info) <fast_tracepoint_jumps>: New field. (convert_ascii_to_int, convert_int_to_ascii): Adjust. (decode_X_packet, decode_M_packet): Adjust. (relocate_instruction): Declare. (in_process_agent_loaded): Declare. (tracepoint_look_up_symbols): Declare. (struct fast_tpoint_collect_status): Declare. (fast_tracepoint_collecting): Declare. (force_unlock_trace_buffer): Declare. (handle_tracepoint_bkpts): Declare. (initialize_low_tracepoint) (supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare. * target.h (struct target_ops) <stabilize_threads, install_fast_tracepoint_jump_pad>: New fields. (stabilize_threads, install_fast_tracepoint_jump_pad): New. * tracepoint.c [HAVE_MALLOC_H]: Include malloc.h. [HAVE_STDINT_H]: Include stdint.h. (trace_debug_1): Rename to ... (trace_vdebug): ... this. (trace_debug): Rename to ... (trace_debug_1): ... this. Add `level' parameter. (trace_debug): New. (ATTR_USED, ATTR_NOINLINE): New. (IP_AGENT_EXPORT): New. (gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end) (collecting, gdb_collect, stop_tracing, flush_trace_buffer) (about_to_request_buffer_space, trace_buffer_is_full) (stopping_tracepoint, expr_eval_result, error_tracepoint) (tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr) (trace_buffer_lo, trace_buffer_hi, traceframe_read_count) (traceframe_write_count, traceframes_created) (trace_state_variables) New renaming defines. (struct ipa_sym_addresses): New. (STRINGIZE_1, STRINGIZE, IPA_SYM): New. (symbol_list): New. (ipa_sym_addrs): New. (all_tracepoint_symbols_looked_up): New. (in_process_agent_loaded): New. (write_e_ipa_not_loaded): New. (maybe_write_ipa_not_loaded): New. (tracepoint_look_up_symbols): New. (debug_threads) [IN_PROCESS_AGENT]: New. (read_inferior_memory) [IN_PROCESS_AGENT]: New. (UNKNOWN_SIDE_EFFECTS): New. (stop_tracing): New. (flush_trace_buffer): New. (stop_tracing_bkpt): New. (flush_trace_buffer_bkpt): New. (read_inferior_integer): New. (read_inferior_uinteger): New. (read_inferior_data_pointer): New. (write_inferior_data_pointer): New. (write_inferior_integer): New. (write_inferior_uinteger): New. (struct collect_static_trace_data_action): Delete. (enum tracepoint_type): New. (struct tracepoint) <type>: New field `type'. <actions_str, step_actions, step_actions_str>: Only include in GDBserver. <orig_size, obj_addr_on_target, adjusted_insn_addr> <adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields. (tracepoints): Use IP_AGENT_EXPORT. (last_tracepoint): Don't include in the IPA. (stopping_tracepoint): Use IP_AGENT_EXPORT. (trace_buffer_is_full): Use IP_AGENT_EXPORT. (alloced_trace_state_variables): New. (trace_state_variables): Use IP_AGENT_EXPORT. (traceframe_t): Delete unused variable. (circular_trace_buffer): Don't include in the IPA. (trace_buffer_start): Delete. (struct trace_buffer_control): New. (trace_buffer_free): Delete. (struct ipa_trace_buffer_control): New. (GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV) (GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT): New. (trace_buffer_ctrl): New. (TRACE_BUFFER_CTRL_CURR): New. (trace_buffer_start, trace_buffer_free, trace_buffer_end_free): Reimplement as macros. (trace_buffer_wrap): Delete. (traceframe_write_count, traceframe_read_count) (traceframes_created, tracing): Use IP_AGENT_EXPORT. (struct tracepoint_hit_ctx) <type>: New field. (struct fast_tracepoint_ctx): New. (memory_barrier): New. (cmpxchg): New. (record_tracepoint_error): Update atomically in the IPA. (clear_inferior_trace_buffer): New. (about_to_request_buffer_space): New. (trace_buffer_alloc): Handle GDBserver and inferior simulatenous updating the same buffer. (add_tracepoint): Default the tracepoint's type to trap tracepoint, and orig_size to -1. (get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated internal variables. (create_trace_state_variable): New parameter `gdb'. Handle it. (clear_installed_tracepoints): Clear fast tracepoint jumps. (cmd_qtdp): Handle fast tracepoints. (cmd_qtdv): Adjust. (max_jump_pad_size): New. (gdb_jump_pad_head): New. (get_jump_space_head): New. (claim_jump_space): New. (sort_tracepoints): New. (MAX_JUMP_SIZE): New. (cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the IPA. (stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected support. Upload fast traceframes, and delete internal IPA breakpoints. (stop_tracing_handler): New. (flush_trace_buffer_handler): New. (cmd_qtstop): Upload fast tracepoints. (response_tracepoint): Handle fast tracepoints. (tracepoint_finished_step): Upload fast traceframes. Set the tracepoint hit context's tracepoint type. (handle_tracepoint_bkpts): New. (tracepoint_was_hit): Set the tracepoint hit context's tracepoint type. Add comment about fast tracepoints. (collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the non-existing action_str field. (get_context_regcache): Handle fast tracepoints. (do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC to the regcache. (fast_tracepoint_from_jump_pad_address): New. (fast_tracepoint_from_ipa_tpoint_address): New. (collecting_t): New. (force_unlock_trace_buffer): New. (fast_tracepoint_collecting): New. (collecting): New. (gdb_collect): New. (write_inferior_data_ptr): New. (target_tp_heap): New. (target_malloc): New. (download_agent_expr): New. (UALIGN): New. (download_tracepoints): New. (download_trace_state_variables): New. (upload_fast_traceframes): New. (IPA_FIRST_TRACEFRAME): New. (IPA_NEXT_TRACEFRAME_1): New. (IPA_NEXT_TRACEFRAME): New. [IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h. [IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer) (gdb_jump_pad_buffer_end): New. [IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New. (initialize_tracepoint): Adjust. [IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch buffer. Initialize the low module. * utils.c (PREFIX, TOOLNAME): New. (malloc_failure): Use PREFIX. (error): In the IPA, an error causes an exit. (fatal, warning): Use PREFIX. (internal_error): Use TOOLNAME. (NUMCELLS): Increase to 10. * configure, config.in: Regenerate. gdb/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention gdbserver fast tracepoints support. gdb/doc/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Set Tracepoints): Mention tracepoints support in gdbserver, and add cross reference. (Tracepoints support in gdbserver): New subsection. |
||
|
Pedro Alves
|
f9e39928dc |
* linux-low.c (linux_kill_one_lwp): Assume the lwp is stopped.
(linux_kill): Stop all lwps here. Don't delete the main lwp here. (linux_detach_one_lwp): Assume the lwp is stopped. (any_thread_of): Delete. (linux_detach): Stop all lwps here. Don't blindly delete all breakpoints. (delete_lwp_callback): New. (linux_mourn): Delete all lwps of the process that is gone. (linux_wait_1): Don't delete the last lwp of the process here. * mem-break.h (mark_breakpoints_out): Declare. * mem-break.c (mark_breakpoints_out): New. (free_all_breakpoints): Use it. * server.c (handle_target_event): If the process is gone, mark breakpoints out. * thread-db.c (struct thread_db) <create_bp>: New field. (thread_db_enable_reporting): Fix prototype. Store a thread event breakpoint reference in the thread_db struct. (thread_db_load_search): Clear the thread_db object. (try_thread_db_load_1): Ditto. (switch_to_process): New. (disable_thread_event_reporting): Use it. (remove_thread_event_breakpoints): New. (thread_db_detach, thread_db_mourn): Use it. |
||
|
Pedro Alves
|
219f2f2398 |
gdb/gdbserver/
* server.h (LONGEST): New. (struct thread_info) <while_stepping>: New field. (unpack_varlen_hex, xrealloc, pulongest, plongest, phex_nz): Declare. (initialize_tracepoint, handle_tracepoint_general_set) (handle_tracepoint_query, tracepoint_finished_step) (tracepoint_was_hit, release_while_stepping_state_list): (current_traceframe): Declare. * server.c (handle_general_set): Handle tracepoint packets. (read_memory): New. (write_memory): New. (handle_search_memory_1): Use read_memory. (handle_query): Report support for conditional tracepoints, trace state variables, and tracepoint sources. Handle tracepoint queries. (main): Initialize the tracepoints module. (process_serial_event): Handle traceframe reads/writes. * linux-low.c (handle_tracepoints): New. (linux_wait_1): Call it. (linux_resume_one_lwp): Handle while-stepping. (linux_supports_tracepoints, linux_read_pc, linux_write_pc): New. (linux_target_ops): Install them. * linux-low.h (struct linux_target_ops) <supports_tracepoints>: New field. * linux-x86-low.c (x86_supports_tracepoints): New. (the_low_target). Install it. * mem-break.h (delete_breakpoint): Declare. * mem-break.c (delete_breakpoint): Make external. * target.h (struct target_ops): Add `supports_tracepoints', `read_pc', and `write_pc' fields. (target_supports_tracepoints): Define. * utils.c (xrealloc, decimal2str, pulongest, plongest, thirty_two) (phex_nz): New. * regcache.h (struct regcache) <registers_owned>: New field. (init_register_cache, regcache_cpy): Declare. (regcache_read_pc, regcache_write_pc): Declare. (register_cache_size): Declare. (supply_regblock): Declare. * regcache.c (init_register_cache): New. (new_register_cache): Use it. (regcache_cpy): New. (register_cache_size): New. (supply_regblock): New. (regcache_read_pc, regcache_write_pc): New. * tracepoint.c: New. * Makefile.in (OBS): Add tracepoint.o. (tracepoint.o): New rule. gdb/ * regformats/regdat.sh: Include server.h. Don't include regcache.h. |
||
|
Pedro Alves
|
d3bbe7a0c8 |
* mem-break.c (struct raw_breakpoint): New field shlib_disabled.
(set_gdb_breakpoint_at): If GDB is inserting a breakpoint on top of another, then delete the previous, and validate all breakpoints. (validate_inserted_breakpoint): New. (delete_disabled_breakpoints): New. (validate_breakpoints): New. (check_mem_read): Validate breakpoints before trusting their shadow. Delete disabled breakpoints. (check_mem_write): Validate breakpoints before trusting they should be inserted. Delete disabled breakpoints. * mem-break.h (validate_breakpoints): * server.c (handle_query): Validate breakpoints when we see a qSymbol query. |
||
|
Pedro Alves
|
8b07ae33f0 |
* linux-low.c (linux_wait_1): Avoid setting need_step_over is
there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints. |
||
|
Pedro Alves
|
414a389f5c |
* mem-break.c (enum bkpt_type): New.
(struct breakpoint): New field `type'. (set_breakpoint_at): Change return type to struct breakpoint pointer. Set type to `other_breakpoint' by default. (delete_breakpoint): Rewrite, supporting more than one breakpoint in the breakpoint list. (delete_reinsert_breakpoints): Only delete reinsert breakpoints. (reinsert_breakpoint): Rename to ... (reinsert_raw_breakpoint): ... this. (reinsert_breakpoints_at): Adjust. * mem-break.h (struct breakpoint): Declare. (set_breakpoint_at): Change return type to struct breakpoint pointer. |
||
|
Pedro Alves
|
d50171e439 |
Teach linux gdbserver to step-over-breakpoints.
* linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field. |
||
|
Joel Brobecker
|
4c38e0a4fc |
Update copyright year in most headers.
Automatic update by copyright.sh. |
||
|
Pedro Alves
|
95954743cb |
2009-04-01 Pedro Alves <pedro@codesourcery.com>
Implement the multiprocess extensions, and add linux multiprocess support. * server.h (ULONGEST): Declare. (struct ptid, ptid_t): New. (minus_one_ptid, null_ptid): Declare. (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) (ptid_get_tid, ptid_equal, ptid_is_pid): Declare. (struct inferior_list_entry): Change `id' type from unsigned from to ptid_t. (struct sym_cache, struct breakpoint, struct process_info_private): Forward declare. (struct process_info): Declare. (current_process): Declare. (all_processes): Declare. (initialize_inferiors): Declare. (add_thread): Adjust to use ptid_t. (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto. (add_process, remove_process, find_thread_pid): Declare. (find_inferior_id): Adjust to use ptid_t. (cont_thread, general_thread, step_thread): Change type to ptid_t. (multi_process): Declare. (push_event): Adjust to use ptid_t. (read_ptid, write_ptid): Declare. (prepare_resume_reply): Adjust to use ptid_t. (clear_symbol_cache): Declare. * inferiors.c (all_processes): New. (null_ptid, minus_one_ptid): New. (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) (ptid_get_tid, ptid_equal, ptid_is_pid): New. (add_thread): Change unsigned long to ptid. Remove gdb_id parameter. Adjust. (thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid. (gdb_id_to_thread): Rename to ... (find_thread_pid): ... this. Change unsigned long to ptid. (gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid. (loaded_dll, pull_pid_from_list): Adjust. (add_process, remove_process, find_process_pid) (get_thread_process, current_process, initialize_inferiors): New. * target.h (struct thread_resume) <thread>: Change type to ptid_t. (struct target_waitstatus) <related_pid>: Ditto. (struct target_ops) <kill, detach>: Add `pid' argument. Change return type to int. (struct target_ops) <join>: Add `pid' argument. (struct target_ops) <thread_alive>: Change pid's type to ptid_t. (struct target_ops) <wait>: Add `ptid' field. Change return type to ptid. (kill_inferior, detach_inferior, join_inferior): Add `pid' argument. (mywait): Add `ptid' argument. Change return type to ptid_t. (target_pid_to_str): Declare. * target.c (set_desired_inferior): Adjust to use ptids. (mywait): Add new `ptid' argument. Adjust. (target_pid_to_str): New. * mem-break.h (free_all_breakpoints): Declare. * mem-break.c (breakpoints): Delelete. (set_breakpoint_at, delete_breakpoint, find_breakpoint_at) (check_mem_read, check_mem_write, delete_all_breakpoints): Adjust to use per-process breakpoint list. (free_all_breakpoints): New. * remote-utils.c (struct sym_cache) <name>: Drop `const'. (symbol_cache, all_symbols_looked_up): Delete. (hexchars): New. (ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one, read_ptid): New. (prepare_resume_reply): Change ptid argument's type from unsigned long to ptid_t. Adjust. Implement W;process and X;process. (free_sym_cache, clear_symbol_cache): New. (look_up_one_symbol): Adjust to per-process symbol cache. * * server.c (cont_thread, general_thread, step_thread): Change type to ptid_t. (attached): Delete. (multi_process): New. (last_ptid): Change type to ptid_t. (struct vstop_notif) <ptid>: Change type to ptid_t. (queue_stop_reply, push_event): Change `ptid' argument's type to ptid_t. (discard_queued_stop_replies): Add `pid' argument. (start_inferior): Adjust to use ptids. Adjust to mywait interface changes. Don't reference the `attached' global. (attach_inferior): Adjust to mywait interface changes. (handle_query): Adjust to use ptids. Parse GDB's qSupported features. Handle and report "multiprocess+". Handle "qAttached:PID". (handle_v_cont): Adjust to use ptids. Adjust to mywait interface changes. (handle_v_kill): New. (handle_v_stopped): Adjust to use target_pid_to_str. (handle_v_requests): Allow multiple attaches and runs when multiprocess extensions are in effect. Handle "vKill". (myresume): Adjust to use ptids. (queue_stop_reply_callback): Add `arg' parameter. Handle it. (handle_status): Adjust to discard_queued_stop_replies interface change. (first_thread_of, kill_inferior_callback) (detach_or_kill_inferior_callback, join_inferiors_callback): New. (main): Call initialize_inferiors. Adjust to use ptids, killing and detaching from all inferiors. Handle multiprocess packet variants. * linux-low.h: Include gdb_proc_service.h. (struct process_info_private): New. (struct linux_target_ops) <pid_of>: Use ptid_get_pid. <lwpid_of>: Use ptid_get_lwp. (get_lwp_thread): Adjust. (struct lwp_info): Add `dead' member. (find_lwp_pid): Declare. * linux-low.c (thread_db_active): Delete. (new_inferior): Adjust comment. (inferior_pid): Delete. (linux_add_process): New. (handle_extended_wait): Adjust. (add_lwp): Change unsigned long to ptid. (linux_create_inferior): Add process to processes table. Adjust to use ptids. Don't set new_inferior here. (linux_attach_lwp): Rename to ... (linux_attach_lwp_1): ... this. Add `initial' argument. Handle it. Adjust to use ptids. (linux_attach_lwp): New. (linux_attach): Add process to processes table. Don't set new_inferior here. (struct counter): New. (second_thread_of_pid_p, last_thread_of_process_p): New. (linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to multiple processes. (linux_kill): Add `pid' argument. Handle it. Adjust to multiple processes. Remove process from process table. (linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust to multiple processes. (any_thread_of): New. (linux_detach): Add `pid' argument, and handle it. Remove process from processes table. (linux_join): Add `pid' argument. Handle it. (linux_thread_alive): Change unsighed long argument to ptid_t. Consider dead lwps as not being alive. (status_pending_p): Rename `dummy' argument to `arg'. Filter out threads we're not interested in. (same_lwp, find_lwp_pid): New. (linux_wait_for_lwp): Change `pid' argument's type from int to ptid_t. Adjust. (linux_wait_for_event): Rename to ... (linux_wait_for_event_1): ... this. Change `pid' argument's type from int to ptid_t. Adjust. (linux_wait_for_event): New. (linux_wait_1): Add `ptid' argument. Change return type to ptid_t. Adjust. Use last_thread_of_process_p. Remove processes that exit from the process table. (linux_wait): Add `ptid' argument. Change return type to ptid_t. Adjust. (mark_lwp_dead): New. (wait_for_sigstop): Adjust to use ptids. If a process exits while stopping all threads, mark its main lwp as dead. (linux_set_resume_request, linux_resume_one_thread): Adjust to use ptids. (fetch_register, usr_store_inferior_registers) (regsets_fetch_inferior_registers) (regsets_store_inferior_registers, linux_read_memory) (linux_write_memory): Inline `inferior_pid'. (linux_look_up_symbols): Adjust to use per-process `thread_db_active'. (linux_request_interrupt): Adjust to use ptids. (linux_read_auxv): Inline `inferior_pid'. (initialize_low): Don't reference thread_db_active. * gdb_proc_service.h (struct ps_prochandle) <pid>: Remove. * proc-service.c (ps_lgetregs): Use find_lwp_pid. (ps_getpid): Return the pid of the current inferior. * thread-db.c (proc_handle, thread_agent): Delete. (thread_db_create_event, thread_db_enable_reporting): Adjust to per-process data. (find_one_thread): Change argument type to ptid_t. Adjust to per-process data. (maybe_attach_thread): Adjust to per-process data and ptids. (thread_db_find_new_threads): Ditto. (thread_db_init): Ditto. * spu-low.c (spu_create_inferior, spu_attach): Add process to processes table. Adjust to use ptids. (spu_kill, spu_detach): Adjust interface. Remove process from processes table. (spu_join, spu_thread_alive): Adjust interface. (spu_wait): Adjust interface. Remove process from processes table. Adjust to use ptids. * win32-low.c (current_inferior_tid): Delete. (current_inferior_ptid): New. (debug_event_ptid): New. (thread_rec): Take a ptid. Adjust. (child_add_thread): Add `pid' argument. Adjust to use ptids. (child_delete_thread): Ditto. (do_initial_child_stuff): Add `attached' argument. Add process to processes table. (child_fetch_inferior_registers, child_store_inferior_registers): Adjust. (win32_create_inferior): Pass 0 to do_initial_child_stuff. (win32_attach): Pass 1 to do_initial_child_stuff. (win32_kill): Adjust interface. Remove process from processes table. (win32_detach): Ditto. (win32_join): Adjust interface. (win32_thread_alive): Take a ptid. (win32_resume): Adjust to use ptids. (get_child_debug_event): Ditto. (win32_wait): Adjust interface. Remove exiting process from processes table. |
||
|
Joel Brobecker
|
0fb0cc7590 | Updated copyright notices for most files. | ||
|
Doug Evans
|
bca929d3a6 |
* utils.c (xmalloc,xcalloc,xstrdup): New fns.
* server.h (ATTR_MALLOC): New macro. (xmalloc,xcalloc,xstrdup): Declare. * hostio.c: Replace malloc,calloc,strdup with xmalloc,xcalloc,xstrdup. * inferiors.c: Ditto. * linux-low.c: Ditto. * mem-break.c: Ditto. * regcache.c: Ditto. * remote-utils.c: Ditto. * server.c: Ditto. * target.c: Ditto. * win32-low.c: Ditto. |
||
Daniel Jacobowitz
|
9b254dd1ce | Updated copyright notices for most files. | ||
|
Daniel Jacobowitz
|
b65d95c576 |
* linux-low.c (linux_wait_for_event): Update messages. Do not
reinsert auto-delete breakpoints. * mem-break.c (struct breakpoint): Change return type of handler to int. (set_breakpoint_at): Update handler type. (reinsert_breakpoint_handler): Return 1 instead of calling delete_breakpoint. (reinsert_breakpoint_by_bp): Check for the original breakpoint before setting a new one. (check_breakpoints): Delete auto-delete breakpoints and return 2. * mem-break.h (set_breakpoint_at): Update handler type. * thread-db.c (thread_db_create_event, thread_db_create_event): Update. * win32-low.c (auto_delete_breakpoint): New. (get_child_debug_event): Use it. |
||
|
Joel Brobecker
|
a9762ec78a |
Switch the license of all .c files to GPLv3.
Switch the license of all .h files to GPLv3.
Switch the license of all .cc files to GPLv3.
|
||
|
Daniel Jacobowitz
|
ae13219ef8 |
* inferiors.c (change_inferior_id): Add comment.
* linux-low.c (check_removed_breakpoint): Add an early prototype. Improve debug output. (linux_attach): Doc update. (linux_detach_one_process, linux_detach): Clean up before releasing each process. (send_sigstop, wait_for_sigstop): Improve comments and debug output. * linux-low.h (struct process_info): Doc improvement. * mem-break.c (delete_all_breakpoints): New. * mem-break.h (delete_all_breakpoints): New prototype. * thread-db.c (find_first_thread): New. (thread_db_create_event): Call it instead of thread_db_find_new_threads. Clean up unused variables. (maybe_attach_thread): Remove first thread handling. (thread_db_find_new_threads): Use find_first_thread. (thread_db_get_tls_address): Likewise. |
||
|
Pedro Alves
|
68070c10c7 |
gdb/
* arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate. |
||
|
Daniel Jacobowitz
|
6aba47ca06 | Copyright updates for 2007. | ||
Eli Zaretskii
|
6f0f660e7b |
* linux-arm-low.c:
* linux-cris-low.c: * inferiors.c: * i387-fp.h: * i387-fp.c: * gdbreplay.c: * regcache.c: * proc-service.c: * mem-break.h: * mem-break.c: * linux-x86-64-low.c: * linux-sh-low.c: * linux-s390-low.c: * linux-ppc64-low.c: * linux-ppc-low.c: * linux-mips-low.c: * linux-m68k-low.c: * linux-m32r-low.c: * linux-low.h: * linux-low.c: * linux-ia64-low.c: * linux-i386-low.c: * linux-crisv32-low.c: * thread-db.c: * terminal.h: * target.h: * target.c: * server.h: * server.c: * remote-utils.c: * regcache.h: * utils.c: * Makefile.in: * configure.ac: * gdbserver.1: Add (C) after Copyright. Update the FSF address. |
||
|
Daniel Jacobowitz
|
f450004a28 |
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument AC_DEFINE throughout. * config.in: Regenerated using autoheader 2.59. * configure: Regenerated. * gdbreplay.c (socklen_t): Provide a default. (remote_open): Use socklen_t. * remote-utils.c (socklen_t): Provide a default. (remote_open): Use socklen_t. (convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use unsigned char. * i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned char for buffers. * linux-low.c (linux_read_memory, linux_write_memory) (linux_read_auxv): Likewise. * mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read) (check_mem_write): Likewise. * mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write): Likewise. * regcache.c (struct inferior_rgcache_data, registers_to_string) (registers_from_string, register_data): Likewise. * server.c (handle_query, main): Likewise. * server.h (convert_ascii_to_int, convert_int_to_ascii) (decode_M_packet): Likewise. * target.c (read_inferior_memory, write_inferior_memory): Likewise. * target.h (struct target_ops): Update read_memory, write_memory, and read_auxv. (read_inferior_memory, write_inferior_memory): Update. * linux-low.h (struct linux_target_ops): Change type of breakpoint to unsigned char *. * linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c, linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c, linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c, linux-s390-low.c, linux-sh-low.c: Update for changes in read_inferior_memory and the_low_target->breakpoint. |
||
Mark Kettenis
|
1c0a559ec8 | * mem-break.c: Remove whitespace at end of file. | ||
|
Daniel Jacobowitz
|
fd3a5ca161 |
2002-05-14 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/mem-break.c (reinsert_breakpoint_by_bp): Correct typo
stop_at -> stop_pc.
|
||
|
Daniel Jacobowitz
|
611cb4a542 |
2002-04-20 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/mem-break.c: New file.
* gdbserver/mem-break.h: New file.
* gdbserver/Makefile.in: Add mem-break.o rule; update server.h
dependencies.
* gdbserver/inferiors.c (struct inferior_info): Add target_data
member.
(clear_inferiors): Free target_data member if set.
(inferior_target_data, set_inferior_target_data): New functions.
* gdbserver/linux-i386-low.c (i386_breakpoint, i386_breakpoint_len)
(i386_stop_pc, i386_set_pc): New. Add to the_low_target.
* gdbserver/linux-low.c (linux_bp_reinsert): New variable.
(struct inferior_linux_data): New.
(linux_create_inferior): Use set_inferior_target_data.
(linux_attach): Likewise. Call add_inferior.
(linux_wait_for_one_inferior): New function.
(linux_wait): Call it.
(linux_write_memory): Add const.
(initialize_low): Call set_breakpoint_data.
* gdbserver/linux-low.h (struct linux_target_ops): Add breakpoint
handling members.
* gdbserver/server.c (attach_inferior): Remove extra add_inferior
call.
* gdbserver/server.h: Include mem-break.h. Update inferior.c
prototypes.
* gdbserver/target.c (read_inferior_memory)
(write_inferior_memory): New functions.
* gdbserver/target.h (read_inferior_memory)
(write_inferior_memory): Change macros to prototypes.
(struct target_ops): Update comments. Add const to write_memory
definition.
|