* sim/fr30/call.cgs: Test ret here as well.
* sim/fr30/ld.cgs: Remove bogus comment.
* sim/fr30/testutils.inc (save_rp,restore_rp): New macros.
* sim/fr30/div.ms: New testcase.
* sim/fr30/st.cgs: New testcase.
* sim/fr30/sth.cgs: New testcase.
* sim/fr30/stb.cgs: New testcase.
* sim/fr30/mov.cgs: New testcase.
* sim/fr30/jmp.cgs: New testcase.
* sim/fr30/ret.cgs: New testcase.
* sim/fr30/int.cgs: New testcase.
Set mips_fpu, and mips_fpu_bitsize.
Set sim_gen, and sim_igen_machine.
* configure: Rebuild.
* mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts.
* sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR.
* sim/fr30/div0s.cgs: New testcase.
* sim/fr30/div0u.cgs: New testcase.
* sim/fr30/div1.cgs: New testcase.
* sim/fr30/div2.cgs: New testcase.
* sim/fr30/div3.cgs: New testcase.
* sim/fr30/div4s.cgs: New testcase.
* sim/fr30/testutils.inc (mvi_h_dr,set_dbits,test_dbits): New Macros.
1998-12-10 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes.
(tx3904sio_tickle): fflush after a stdout character output.
* sim/fr30/testutils.inc (set_s_user): Correct Mask.
(set_s_system): Correct Mask.
* sim/fr30/ld.cgs (ld): Move previously failing test back
into place.
* sim/fr30/ldm0.cgs: New testcase.
* sim/fr30/ldm1.cgs: New testcase.
* sim/fr30/stm0.cgs: New testcase.
* sim/fr30/stm1.cgs: New testcase.
* configure: Regenerate.
* sim-main.h: Protect against multiple inclusion.
Don't include cgen-scache.h,cgen-cpu.h,cgen-trace.h,cpuall.h.
Done by cgen-sim.h now.
* tconfig.in (SIM_HAVE_MODEL): Delete, moved to cgen-types.h.
* cpuall.h: Regenerate.
* cpu.h,decode.c,sem-switch.c,sem.c: Regenerate.
* mloop.in (extract16): Make static inline again.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(extract32): Ditto.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(execute): Test ARGBUF_PROFILE_P before profiling.
Update calls to TRACE_INSN_INIT,TRACE_INSN_FINI.
* cpux.h,decodex.c,modelx.c,semx-switch.c: Regenerate.
* mloopx.in: Rewrite.
* cgen-sim.h: Simple header that includes others.
* sim-arange.c: New file.
* sim-arange.h: New file.
* sim-basics.h: Include it.
* Make-common.in (SIM_NEW_COMMON_OBJS): Add sim-arange.o.
(sim-arange.o): Add rule for.
* sim-cpu.h (sim_cpu_msg_prefix): Add prototype.
(sim_io_eprintf_cpu): Add prototype.
* sim-inline.h (HAVE_INLINE): Define if GNUC.
(INLINE2): New macro.
(EXTERN_INLINE): New macro.
* sim-module.c (sim_post_argv_init): Initialize cpu backlink
before calling module init fns.
* sim-profile.h (OPTION_PROFILE_*): Move into enum.
(profile_init): New function.
(profile_options): New option --profile-range.
(profile_option_handler): Handle --profile-range.
(profile_print_insn): Qualify address range specific section titles.
(profile_print_addr_ranges): New function.
(profile_info): Print address ranges if specified.
(profile_install): Set profile_init init fn.
* sim-profile.h (PROFILE_DATA): New member `range'.
* sim-trace.c (trace_init): New function.
(trace_options): New option --trace-range.
(trace_option_handler): Handle --trace-range.
(trace_install): Set trace_init init fn.
* sim-trace.h (TRACE_DATA): New member `range'.
* sim-utils.c (sim_cpu_msg_prefix): New function.
(sim_io_eprintf_cpu): New function.
* cgen-engine.h (PC_IN_TRACE_RANGE_P): New macro.
(PC_IN_PROFILE_RANGE_P): New macro.
* cgen-trace.c (trace_insn_init): Set current_insn to NULL.
(trace_insn_fini): New arg abuf. All callers updated.
Exit early if trace_insn not called. Check ARGBUF_PROFILE_P before
printing cycle counts.
* cgen-trace.h (trace_insn_fini): Update prototype.
(TRACE_RESULT_P): New macro.
(TRACE_INSN_INIT,TRACE_INSN_FINI): New arg abuf. All callers updated.
(TRACE_INSN): Check ARGBUF_TRACE_P.
(TRACE_EXTRACT,TRACE_RESULT): New arg abuf. All callers updated.
* cgen-types.h (SIM_INLINE): Delete.
(SIM_HAVE_MODEL,SIM_HAVE_ADDR_RANGE): Define.
* cgen-utils.c: Don't include cgen-engine.h
* genmloop.sh (@cpu@_fill_argbuf): New function.
(@cpu@_fill_argbuf_tp): New function.
(@cpu@_emit_before,@cpu@_emit_after): New functions.
(@cpu@_pbb_begin): Prefix cti_sc,insn_count with '_'.
(SET_CTI_VPC,SET_INSN_COUNT): Update.
(@cpu@_pbb_before): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_INIT,TRACE_INSN_FINI.
(@cpu@_pbb_after): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_FINI.
* sim/fr30/ld.cgs: Implement more loads.
* sim/fr30/call.cgs: New testcase.
* sim/fr30/testutils.inc (testr_h_dr): New macro.
(set_s_user,set_s_system): New macros.
[common/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* sim-gx-run.c (sim_engine_run): Use new tgx_info struct to
collect run-time arguments to gx block.
* sim-gx.h (sim_gx_function): Corresponding signature change.
* sim-gx.c (sim_gx_compiled_block_f): Remove nonfunctional code to
again compile a gx block source file.
(sim_gx_compiled_block_dispose): Uninstall obsoleted gx block
shared libraries.
(sim_gx_block_translate): Always emit new "gx_label_NNNN" labels,
for basic block entry points, even if !__GNUC__.
[m32r-gx/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* Makefile.in (SIM_OBJS): Don't build sim-core.o.
* configure.in: Added --enable-sim-inline support.
Look for "getenv()" function.
* configure: Rebuilt.
* config.in: Rebuilt.
* gx-translate.c: Include "sim-inline.c" for sim-core inlining.
(m32r_gx_{load,store}*): Update signature.
(tgx_emit_pre_function): Emit new "tgx_info" struct, update
callback function signatures.
(m32r_emit_*_insn): Use new callback signatures. For all short
branches in optimized mode, emit direct "goto gx_label_NNNN".
(tgx_optimize_test): If the GX_OPTIMIZE environment variable is
set, allow its integer value to override the optimization heuristic.
* m32r-sim.h: New empty placeholder file.
* sim-main.c: New empty placeholder file.
* sim-if.c (sim_create_inferior): Use NULL instead of &abort
for unimplemented register fondling functions.
* sim-main.h: Add multiple inclusion guard. Update callback
function signatures.
(tgx_info): New struct for collecting gx block invocation
arguments.
v850/simops.c, d10v/simops.c, v850/Makefile.in, d10v/Makefile.in:
Include targ-vals.h instead of syscall.h. Replace SYS_* with
TARGET_SYS_*. Add dependency.
z8k/support.c: Include <errno.h>
v850/simops.c: Replace long with portable signed32.
mips/interp.c: Make sim_monitor global - needed by sky.
(CGEN_ARCH_SCM): New variable.
* cgen-engine.h (EXTRACT_[ML]SB0_{INT,UINT}): New macros.
(EXTRACT_INT,EXTRACT_UINT): New macros.
(SEM_SEM_ARG): New macro.
(SEM_NEXT_VPC): New arg `pc'.
* cgen-sim.h (EXTRACT_SIGNED,EXTRACT_UNSIGNED): Delete.
(sim_disassemble_insn): Update prototype.
* cgen-trace.c (current_insn,insn_fields): New static locals.
(trace_insn): Set them.
* cgen-utils.scm: #include cgen-engine.h.
(sim_disassemble_insn): New arg insn_fields.
Handle variable length insns.
* genmloop.sh: Only emit pbb decls if -pbb.
(${cpu}_scache_lookup): New arg `vpc'.
(scache support): Fetch pc before entering loop.
[d30v/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0.
[testsuite/d30v-elf/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* do-shifts.S: Add test for large mvfacc shifts.
HAVE_PARALLEL_INSNS, define as 0 or 1. Emit decls of fns in mloop.cin.
* cgen-engine.h: Typedefs of IADDR,CIA,SEM_ARG,SEM_PC moved ...
* cgen-sim.h: ... to here.
Thu Oct 29 12:07:06 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-psrlvw.s (test_psrlvw): Add test for sign-extension in insn.
* t-padsbh.s: New test.
* t-mult1.s: New test.
* Makefile.in: Run them.
routine as the number of bytes to process. This apparently is due to
text-mode vs binary-mode. If the mounts are done text-mode, then the
size returnedby fstat() may be different than the number of bytes
"read" in text mode.
(sim-core.o): Delete duplicate dependence on $(SIM_EXTRA_DEPS).
(sim-cpu.o,sim-endian.o,sim-hw.o): Ditto.
(cgen-run.o,cgen-scache.o,cgen-trace.o,cgen-utils.o): Delete
explicit cgen header dependencies, require SIM_EXTRA_DEPS to include
CGEN_INCLUDE_DEPS.
* cgen-cpu.h: New file.
* cgen-engine.h: New file.
* cgen-scache.h: New file.
* cgen-sim.h: Delete portions moved to new files.
* genmloop.sh: Generate two files eng.hin,mloop.cin explicitly,
rather than sending result to stdout.
(cgen-run.o): New rule.
* cgen-ops.h: Delete many BI macros. Change all UBI -> BI.
* cgen-run.c (prime_cpu): New function.
* cgen-scache.c: Add pseudo-basic-block (pbb) scaching support.
(scache_option_handler, case OPTION_PROFILE_SCACHE): Handle explicitly
mentioned cpu.
(scache_flush_cpu,scache_lookup,scache_lookup_or_alloc): New fns.
* cgen-sim.h (CGEN_INSN_VIRTUAL_TYPE): New enum.
(CGEN_INSN_VIRTUAL_P): New macro.
(SEM_PC): New typedef.
(SEMANTIC_FN): Change type of result to SEM_PC.
(SEM_SET_FULL_CODE,SEM_SET_FAST_CODE,SEM_SET_CODE): New macros.
(IDESC_CTI_P,IDESC_SKIP_P): New macros.
(SCACHE_MAP): New typedef.
(CPU_SCACHE): Add pbb support.
(scace_lookup,scache_lookup_or_alloc,scache_flush_cpu): Declare.
(SEM_BRANCH_INIT_EXTRACT,SEM_BRANCH_INIT,SEM_BRANCH_FINI): New macros.
(CGEN_CPU): New members running_p,insn_count,{fast,full}_engine_fn,
max_slice_insns.
(INSN_NAME): Delete.
(cgen_insn_name): Declare.
(sim_engine_invalid_insn): Renamed from sim_engine_illegal_insn.
* cgen-trace.c (trace_buf): Shrink from 1024 to 256 bytes.
(first_insn_p): Make static.
(trace_insn): Handle virtual insns specially.
(cgen_trace_printf): Ensure we haven't overflowed the buffer.
* cgen-types.h (UBI): Delete.
(MODE_TYPE): New enum.
(HOSTINT,HOSTUINT,HOSTPTR): Delete.
* cgen-utils.c (mode_names): Delete UBI. Add INT,UINT,PTR.
(cgen_virtual_opcode_table): New global.
(cgen_insn_name): New function.
(sim_disassemble_insn): Ignore virtual insns.
* genmloop.sh: Delete top level loop generation. Add pbb support.
* sim-cpu.h (CPU_INSN_NAME_FN): New typedef.
(sim_cpu_base): New members max_insns,insn_name,model_data.
(CPU_PC_GET,CPU_PC_SET): New macros.
(sim_pc_get,sim_pc_set): Declare.
* sim-model.c (model_set): Call model init fn.
* sim-model.h (MODEL_FN): New typedef.
(INSN_TIMING): New member model_fn.
(MODEL): New members num,init.
* sim-profile.c (sim_profile_print_bar): Renamed from print_bar.
All callers updated.
(profile_insn_init): New fn.
(profile_print_insn): Update, INSN_NAME -> CPU_INSN_NAME.
Exit early if insn profiling not supported.
(profile_print_memory): Update, MAX_MODES -> MODE_TARGET_MAX.
(profile_install): Record profile_insn_init as init fn.
(profile_uninstall): Free PROFILE_INSN_COUNT if non-null.
* sim-profile.h: Update, MAX_MODES -> MODE_TARGET_MAX.
(PROFILE_DATA): Delete member exec_time.
Change insn_count to pointer to array, rather than the array.
(sim_profile_print_bar): Declare.
Fri Sep 4 10:37:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (mtsab): Correct typo in input register.
* sim-main.h (TMP_*): New macros for accessing local 128-bit
temporary for multimedia instructions.
* r5900.igen (*): Convert most instructions to use new TMP
macros to store output result during computation.
* interp.c: use NUM_CORE_REGS
* sky-gdb.c (set_fifo_breakpoints): use VIF interrupt bit for break
* sky-pke.c (pke_issue): use interrupt bit for break points
Hack sanitize so that it doesn't sanitize vrXXX when either of
keep-vr5400 or keep-vr4320 are specified.
Move two basic vr4100 instructions from mips.igen to vr.igen.
* op_utils.c (do_syscall): Rewrite to use common/syscall.c.
(syscall_read_mem, syscall_write_mem): New functions for syscall
callbacks.
* mn10300_sim.h: Add prototypes for syscall_read_mem and
syscall_write_mem.
* mn10300.igen: Change C++ style comments to C style comments.
Check for divide by zero in div and divu ops.
Do not sign extend immediate for mov imm,XRn.
More random mul, mac & div fixes.
Remove some unused variables.
Sign extend 24bit displacement in memory addresses.
Whee, more fixes.
Minor fixes in multiply/divide patterns.
start-sanitize-am33
* am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
fixes to 2 register multiply, divide and mac instructions. Set
Z,N correctly for sat16. Sign extend 24 bit immediate for add,
and sub instructions.
* am33.igen: Add remaining non-DSP instructions.
end-sanitize-am33
(CPU_SCACHE_HASH_MASK): New macro.
(SCACHE_HASH_PC): Rewrite.
* genmloop.sh (engine_resume_{full,fast}): Move some of hash
computation out of main loop.
* dv-mn103tim.c: Include sim-assert.h
* dv-mn103ser.c (do_polling_event): Check for incoming data on
serial line and schedule next polling event.
(read_status_reg): schedule events to check for incoming data on
serial line and issue interrupt if necessary.
* sky-pke.c(read_pke_pcx): return index of current pc
* sky-pke.h: export read_pke_pcx
* interp.c(sim_fetch_registers): read pke pc/pcx
* sky-libvpe.c: track name change from GDB
* sim-main.h: add vif memory based pc
- extend gdb comm area for fifo breakpoints
- define SIM_ENGINE_RESTART_HOOK
* sky-gdb.c: add support for VIF breakpoints
Tue Jun 16 09:03:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-cop2.s: Reorder instruction blocks to prevent "Out of bounds"
messages during test execution. Added dummy branch labels for BC2*
instructions.
* t-cop2.brn: Use --sky-debug option instead of env var.
* t-cop2.vuexpect: Updated for with new disassembly format.
* sky_sce_fast.exp: Don't compare GIF outputs for
--float-type=fast.
* sce_test{17,33,49}.dvpasm: Use ".DmaPackVif 1" option to
exercise assembler / PKE.
* rw-vureg.c: Cast memcpy operand to allay warning.
any open file handles before exiting
* sky-gpuif.[c|h]: add disassembly on the fly code, log and log
file option support
* sky-gdb.[c|h] (sky_command_options_close()): new function, added
some body to the log and log file option sections
which is now a list of options controlling the behaviour of sim_run.
* sim/sky/sky-defs.tcl (run_trc_test): Update to new way of
environment variables to sim_run.
* dv-mn103int.c (external_group): Use enumerated types to access
correct group addresses.
* dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
triggers an interrupt on the higher-numbered timer's port.
Wed Jun 10 15:56:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim/sky/t-int.c: New file to test sky hardware
interrupts.
* sim/sky/t-int-handler.s: New file for null interrupt
handler.
* sim/sky/t-int.brn: New file to build new test.
Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
It is not yet properly tested.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
byte-swapping unnecessary. Add -sparclite-board option for
emulating RAM found on typical SPARClite boards. Print
error message for unrecognized option.
* erc32.c: Change RAM address and size from constants to variables,
to allow emulation of SPARClite board RAM.
(fetch_bytes, store_bytes): New helper functions for revamped
mememory_read and memory_write.
(memory_read, memory_write): Rewrite to store bytes in target
byte order instead of storing words in host byte order; this
greatly simplifies support of little-endian programs.
(get_mem_ptr): Remove unnecessary byte parameter.
(sis_memory_write, sis_memory_read): Store words in target
byte order instead of host byte order.
(byte_swap_words): Remove, no longer needed.
* sis.h ((byte_swap_words): Remove declaration, no longer needed.
(memory_read): Add new sz parameter.
* sis.c (run_sim): Use revamped memory_read, which makes
byte-swapping unnecessary.
* exec.c (dispatch_instruction): Use revamped memory_read, which
makes byte-swapping and double-word fetching unnecessary.
* func.c (sparclite_board): Declare new variable.
(get_regi): Handle little-endian data.
(bfd_load): Recognize little-endian SPARClite as having
little-endian data.
* armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
of ":tt" to catch stdin in addition to stdout.
(ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
or success of lseek().
From PR 15839, modified a bit by me to appease my sense of style--but
not too much because I am lazy.
Mon Jun 1 18:54:22 1998 Frank Ch. Eigler <fche@cygnus.com>
* lib/sim-defs.exp (sim_run): Add possible environment variable
list to simulator run.
start-sanitize-sky
* sim/sky/sky-defs.tcl: Use it.
* sim/sky/t-pke2.vif1out: Update to match recent word-precise
tracking table change in sim/mips/sky-pke.c.
* sim/sky/t-pke3.trc: Ditto.
* sim/sky/t-pke4.vif0expect: Ditto.
end-sanitize-sky
Mon May 18 10:37:47 1998 Doug Evans <devans@canuck.cygnus.com>
* mloopx.in (extract): Set abuf.addr for proper fill nop counting.
(execute): Count parallel insns.
* sim-if.c (print_m32r_misc_cpu): Print count.
* sim-main.h (M32R_MISC_PROFILE): New member parallel_count.
(trace_insn_init): Set it.
(trace_insn_fini): Use TRACE_PREFIX.
(trace_insn): Rewrite to use trace_prefix.
* sim-trace.c (trace_prefix): Don't print filename arg if NULL.
Adjust width accordingly.
* sim-profile.h (PROFILE_DATA): New member profile_any_p.
(PROFILE_ANY_P,PROFILE_INSN_P,PROFILE_MEMORY): New macros.
(PROFILE_SCACHE_P,PROFILE_PC_P,PROFILE_CORE_P): New macros.
(PROFILE_COUNT_INSN,PROFILE_COUNT_READ,PROFILE_COUNT_WRITE): Simplify.
(PROFILE_COUNT_CORE): Simplify.
* sim-profile.c (profile_option_handler): Compute profile_any_p.
* Followup patch for SCEI PR 15853
* First check-in of TX3904 interrupt controller devices for ECC. [sanitized]
* First implementation of MIPS hardware interrupt emulation.
Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware
modules. Recognize TX39 target with "mips*tx39" pattern.
* configure: Rebuilt.
* sim-main.h (*): Added many macros defining bits in
TX39 control registers.
(SignalInterrupt): Send actual PC instead of NULL.
(SignalNMIReset): New exception type.
* interp.c (board): New variable for future use to identify
a particular board being simulated.
(mips_option_handler,mips_options): Added "--board" option.
(interrupt_event): Send actual PC.
(sim_open): Make memory layout conditional on board setting.
(signal_exception): Initial implementation of hardware interrupt
handling. Accept another break instruction variant for simulator
exit.
(decode_coproc): Implement RFE instruction for TX39.
(mips.igen): Decode RFE instruction as such.
start-sanitize-tx3904
* configure.in (tx3904cpu,tx3904irc): Added devices for tx3904.
* interp.c: Define "jmr3904" and "jmr3904debug" board types and
bbegin to implement memory map.
* dv-tx3904cpu.c: New file.
* dv-tx3904irc.c: New file.
end-sanitize-tx3904
* sim-engine.h (sim_engine_set_run_state): Declare.
* genmloop.sh (pending_reason,pending_sigrc): New static locals.
(@cpu@_engine_stop): New args reason,sigrc. All callers updated.
(engine_resume): Reorganize. Allow synchronous exit from main loop.
* exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
* (mul64): Simplify calculation of negative result.
* (div64): New helper function for 64-bit division.
* (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
and UDIVCC.
Replace check_op_hilo with check_mult_hilo and check_div_hilo.
Add special r3900 version of do_mult_hilo.
(do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo
with calls to check_mult_hilo.
(do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo
with calls to check_div_hilo.
for VU memory tracking tables.
Thu May 7 12:15:41 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-pke.c (pke_pcrel_operand_bits): Compute word-resolution
source address for UNPACK into VU MEM.
(pke_code_mpg): Ditto for MPG into VU uMEM.
Instead save them in the sim_hw structure.
*) Route sim-core accesses to hw devices through the sim_hw module.
*) Route hw device requests to abort/halt through the sim_hw module.
*) Add print parameter to hw_tree_print() function.
*) Add sim_engine_vabort () function.
* common/aclocal.m4: call AM_EXEEXT in SIM_AC_COMMON, define
AM_CYGWIN32 and AM_EXEEXT.
* common/Make-common.in: set EXEEXT, add missing EXEEXTs
to run and install-common rules.
* common/configure: regenerate
And update all subdirectory ChangeLogs and configure files.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
../common' to autoconf and autoheader. Unconditionally run
autoconf in every subdir.
(autoconf-changelog autoheader-changelog): Unconditionally run
commands in every subdir.
(autoconf-install autoheader-install): Likewise.
* config.in: Ditto.
* Makefile.in (top_builddir): New macro.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(psim): Depend on INTLDEPS; link against INTLLIBS.
* configure.in: Call CY_GNU_GETTEXT.
* config.in: Ditto.
* acconfig.h: New file.
* Make-common.in (top_builddir): New macro.
(INTL_LIB): Removed.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(LIBDEPS): Use INTLDEPS.
(EXTRA_LIBS): Use INTLLIBS.
* aclocal.m4 (SIM_AC_COMMON): Call CY_GNU_GETTEXT.
(CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST,
AM_LC_MESSAGES): New macros from GNU gettext.
* gen.c (insns_bit_useless): Perform unsigned bit comparisons.
* filter.c (is_filtered_out, filter_parse): Pacify GCC, len is unsigned.
* gen-icache.c (print_icache_extraction): Do not type cast pointers.
o When unpacking an r5900 FP value,
was not treating IEEE-NaN's as very
large values.
o When packing an r5900 FP result from an infinite
precision intermediate value was saturating
to IEEE-MAX instead of r5900-MAX
o The least significant bit of the FP status
register did not stick to one.
* sim-memopt.c (parse_addr): Sunos 4.5 does not hane strtol
declared so we need this cast to prevent long long addresses
from being misconfigures. Results in access to unmapped memory.
[ChangeLog]
Mon Apr 13 16:51:00 1998 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (*): Added .vuout/.vuexpect/.vuok test targets
for confirming VU instruction trace.
(t-cop2): Test COP2 sim using above facility.
* t-cop2.vuexpect: New file.
[ChangeLog]
Mon Apr 13 16:28:52 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (decode_coproc): Add proper 1000000 bit-string at top
of VU lower instruction.
VCALLMS-related were found/fixed.
[ChangeLog.sky]
* sky-vu.c ({read,write}_vu_special_reg): Add CMSAR[01] as special
registers for a VU. Behavior not as mandated.
({read,write}_vu_{misc,special}_reg): Create sim_io_error upon
access to unknown register. Behavior not as mandated.
* sky-vu.h (anonymous register numbering enum): Add CMSAR[01].
* sky-libvpe.c (indebug): Cache $ENV{'SKY_DEBUG'}.
[ChangeLog]
* Makefile.in (SIM_SKY_OBJS): Added sky-vudis.o.
* interp.c (decode_coproc): Refer to VU CIA as a "special"
register, not as a "misc" register. Aha. Add activity
assertions after VCALLMS* instructions.
work!
[ChangeLog.sky]
* sky-vu.h (vu_device): Represent "macro instruction just stuffed
into fetch buffer" condition with new "m" bit. Rename old "m" to
"l".
* sky-libvpe.c (indebug): Save snapshot of environment value;
workaround for suspected memory corruption.
(fetch_inst): Respect new "m" macro-instruction flag for reporting
successful fetch to caller.
(exec_inst): Disassemble instruction here instead of fetch time.
Renamed old "m" -> "l" flag in VU state to track interlock
release.
(vpecallms_cycle): Call exec_inst only if fetch_inst did some
work.
* sky-vu.c (vu_attach, vu[01]_device): Revamped initialization to
ensure complete clear of tail part of struct at attach time.
(vu0_busy): Fix thinko.
(vu0_macro_issue): Adapt to new "l" flag.
(vu0_micro_interlock_released): Ditto.
(write_vu_special_reg): Ditto.
(read_vu_special_reg): Compute VBS0/VBS1 bits more explicitly.
The other VU status bits are not yet computed.
[ChangeLog]
* interp.c (decode_coproc): Do not apply superfluous E (end) flag
to upper code of generated VU instruction.
sce*_testN.* corresponds to the original testN/test.*
*.vuasm : MICRO code
*.dvpasm : DMAtag and VIF code description
*.out_gif.dat : GIF output values for the corresponding testcase.
sce_main.c : driver file for the SCE testcases
sce_macro.s : SCE provided macro file needed by the SCE (feb28) testcases
refresh.s : Needed by sce_main.c
Makefile.in : Updated to run make and run the SCE testsuite.
: ----------------------------------------------------------------------
masking facility for PATH3 transfers.
[ChangeLog.sky]
Sun Apr 5 12:11:45 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-libvpe.c (exec-inst): Added "M" bit detection for upper
instruction.
* sky-pke.c (pke_check_stall): Added more assertions.
(pke_code_mskpath3): Use new GPUIF M3P control register.
* sky-pke.h (VU[01]_CIA): New macros that give VU CIA
pseudo-register addresses.
* sky-vu.h (vu_device, VectorUnitState): Merged structs.
(VectorUnitState.mflag): New field.
(VU_REG_{CMSAR0,CMSAR1,FBRST}) Added missing control registers.
* sky-vu.c (vu0_busy): New function.
(vu0_q_busy): New function.
(vu0_macro_issue): New function.
(vu0_micro_interlock_released): New function.
(vu0_busy_in_{micro,macro}_mode): Deleted stubs.
(vu0_macro_hazard_check): Deleted stubs.
(vu_attach): Adapted code to merged device & state struct.
(read_vu_special_reg): Compute VBS0/VBS1 bits in STAT register.
[ChangeLog]
start-sanitize-sky
Sun Apr 5 12:05:44 1998 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (*): Adapt code to merged VU device & state structs.
(decode_coproc): Execute COP2 each macroinstruction without
pipelining, by stepping VU to completion state. Adapted to
read_vu_*_reg style of register access.
* mips.igen ([SL]QC2): Removed these COP2 instructions.
* r5900.igen ([SL]QC2): Transplanted these COP2 instructions here.
* sim-main.h (cop_[ls]q): Enclosed in TARGET_SKY guards.
end-sanitize-sky
into single PKE-style vu.[ch].
[ChangeLog]
Fri Mar 27 16:19:29 1998 Frank Ch. Eigler <fche@cygnus.com>
start-sanitize-sky
* Makefile.in (SIM_SKY_OBJS): Replaced sky-vu[01].o with sky-vu.o.
* interp.c (sim_{load,store}_register): Use new vu[01]_device
static to access VU registers.
(decode_coproc): Added skeleton of sky COP2 (VU) instruction
decoding. Work in progress.
* mips.igen (LDCzz, SDCzz): Removed *5900 case for this
overlapping/redundant bit pattern.
(LQC2, SQC2): Added *5900 COP2 instruction skeleta. Work in
progress.
* sim-main.h (status_CU[012]): Added COP[n]-enabled flags for
status register.
end-sanitize-sky
* interp.c (cop_lq, cop_sq): New functions for future 128-bit
access to coprocessor registers.
* sim-main.h (COP_LQ, COP_SQ): New macro front-ends for above.
[ChangeLog.sky]
* sky-engine.c (engine_run): Adapted from vu[01] -> vu merge.
* sky-hardware.c (register_devices): Ditto
* sky-pke.c (pke_fifo_*): Made these functions private again, now
that the GPUIF code does not use them.
* sky-pke.h (pke_fifo_*): Removed newly private declarations.
* sky-vu.c (*): Major rework: merge of old sky-vu0.c and
sky-vu1.c. Management of two VU devices parallels two PKEs.
Work in progress.
* sky-vu.h (*): Other half of merge.
(vu_device): New struct, parallel to pke_device.
sky-gs.h: initial drop of GS control registers
Makefile.in: added sky-gs.o to sanitized list
sky-gpuif.c (gif_io_write_buffer): correct memset length error, renamed
trace file for gif
(hw_tree_find_*_property): Clean up error message when property is not found.
* dv-pal.c (hw_pal_io_read_buffer): Check the smp property is present before
looking for it.
hw_pal_timer, hw_pal_timer_value): Define.
(hw_pal_io_read_buffer, hw_pal_io_write_buffer): Add timer support
(do_counter_event, do_counter_read, do_counter_value,
do_counter_write): new functions.
* hw-tree.c (hw_printf): Send tree dump to stderr, same as other
trace output.
* hw-base.c (hw_create): Stop searching for a device when one is
found.
* (stamp-tvals sim-inline.c): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* Makefile.in (nltvals.def): Use $(SHELL) when invoking
move-if-change. Fixes NT native build problem.
* configure: Regenerate with autoconf 2.12.1 to fix shell issues for
NT native builds.
Tidy up hw-properties error messages.
New device dv-glue.c (copied from ../ppc/hw_glue.)
Only attach a port after a devices initialization has finished.
* sky-pke.h (pke_fifo*): Exported these formerly private functions.
(pke_device): Added FIFO cache fields.
* sky-pke.c (pke_fifo_reset): New function for GPUIF client -
clear FIFO contents.
(pke_pcrel_fifo): Added caching facility to prevent O(n^2) cost for
searching for consecutive operand words.
* sky-libvpe.c (MEM, uMEM): New/changed macros that perform modulo
calculations to handle out-of-range VU memory addresses.
(*): Replaced many previous uses of MEM[] and state->uMEM[] with
calls to above macros.
* sky-vu.h (struct VectorUnitState): Added qw/dw size fields for
MEM/uMEM buffers, for overflow prevention. Renamed MEM/uMEM fields
to catch all their prior users.
* sky-vu0.c (vu0_attach): Manually align MEM0/MEM1 buffers to force
16-byte alignment. (zalloc is not enough.)
* sky-vu1.c (vu1_attach): Ditto.
(init_vu): Store buffer sizes from allocation into VectorUnitState.
* sky-gpuif.h (GifPath): Use a pke_fifo strucf instead of
temporary fixed-size array for flexible FIFO sizing.
* sky-gpuif.c (SKY_GPU2_REFRESH): This is now an integer value to be
used as a modulus for periodic refresh.
(refresh): New function to send GPU2 refresh code periodically.
(*): Use pke_fifo calls to en/dequeue GPUIF tags & operands.
* sky-pke.h (struct pke_device): Added fields to allow caching of
results from recent FIFO searches.
the stand-alone executable.
[in ChangeLog.sky:]
* sky-gpuif.c (call_gs): Call properly into GPU2 library if
configured --with-sim-gpu2. Use SKY_GPU2_REFRESH symbol as
placeholder for future GPU2-refresh policy.
[in ChangeLog:]
* Makefile.in (MIPS_EXTRA_LIBS, SIM_EXTRA_LIBS): Added
configurable settings for stand-alone simulator.
start-sanitize-sky
* configure.in: Added --with-sim-gpu2 option to specify path of
sky GPU2 library. Triggers -DSKY_GPU2 for sky-gpuif.c, and
links/compiles stand-alone simulator with this library.
* interp.c (MEM_SIZE): Increased default sky memory size to 16MB.
end-sanitize-sky
* configure.in: Added X11 search, just in case.
* configure: Regenerated.
will ignore this until next SCEI clarification.
* tsv308_1.trc: Fixed test case as per SCEI email.
* tsv316_1.trc: Ditto.
* tsv408_1.trc: Same.
* tsv416_1.trc: Again.
* t-pke3.trc: Added more padding to one VU test to widen timing race.
* Make-common.in (dv-sockser.o): Add rule for.
* aclocal.m4: Check for fcntl.h.
* config.h: Add HAVE_FCNTL_H.
* sim-break.c (remove_breakpoint): Fix thinko.
* sim-hload.c (sim_load): Provide default value of SIM_HANDLES_LMA.
Use SIM_HANDLES_LMA for lma_p arg to sim_load_file.
of PKE, some old test cases had to be modified. There are suspected bugs
in the SCEI test cases too, so "make check" does not run cleanly at present.
* tss*.trc: New files, generated by perl script from
SCEI "test0" bucket.
* tsv*.trc: New files, generated by perl script from SCEI "test0"
bucket. Note that tsv432_0 may obsolete t-pke1.
* Makefile.in (TESTS): Run new scripts.
(check): Bulldoze through failing test cases with "make -k" until
SCEI fixes some of them.
(.run.ok): Increased run-time limit since some test runs can take
several seconds.
effectively full. The code is believed to be functionally complete now.
Some code cleanup is included at no extra charge in this version.
Fri Mar 13 20:21:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-vu1.c: (dump_mem): Commented out function to satiate
warning-ful compilation.
* sky-pke.c: (pke_reset): New function, called explicitly at
initialization and at FBRST.
(pke_fifo_flush): New function to flush (skip over) existing
quadwords in FIFO.
(pke_fifo_fit): New function to add space for new quadword in
FIFO.
(pke_fifo_access): New function to absolute-index into FIFO.
(pke_fifo_old): New function to remove old quadwords from FIFO.
(pke_begin_interrupt_stall): New function to abstract
interrupt-caused stalls.
(pke_*): Access PKE FIFO only thorugh pke_fifo functions.
(pke_pcrel_*): Renamed pke_pc_* functions.
(pke_code_unpack): Numerous logic tweaks for latest UNPACK
behavior changes & clarifications from SCEI.
* sky-pke.h (struct pke_fifo): New explicit FIFO representation.
(struct pke_device): Use struct above.
(PKE_DEBUG): Removed macro as misnomer.
* sky-hardware.c: Moved *_cmd_install declarations out.
* sky-hardware.h: Moved *_cmd_install declarations in.
define macro STATE_PROG_SYMS.
* sim-trace.c (trace_one_insn): Add variables abfd, symsize,
symbol_count, and asymbols. Call bfd_get_symtab_upper_bound
and bfd_canonicalize_symtab, to get symbol table on first use
and preserve it via STATE_PROG_SYMS for future calls to
bfd_find_nearest_line.
for sim/testsuite/sky:
* t-pke4.run: Removed test, since it succeeds yet returns a
non-zero exit code.
* Makefile.in (RUNOPTS): Removed --memory-size flag, made
unnecessary by sim/mips/interp.c changes.
(TESTS): Removed t-pke4.ok target.
* t-pke3.trc: Classified tests with [---] indicators, to match
items up with entries documented in testplan.sgml. Added numerous
additional tests. They assert behavior that assumes certain
favorable answers to PKE question set #6 to SCEI.
* t-pke1.trc: Added some [---] indicators.
for sim/mips:
* sky-pke.c (pke_issue): Revamped interrupt & stall code. Assume
that ER1/ER0/PIS bits are only set if not masked by ERR bits.
Signal PIS only if unmasked.
(pke_code_error): Signal ER1 only if unmasked.
(pke_pc_fifo): Signal ER0 only if unmasked.
(pke_code_unpack): Round up num_operands for last operand's
partial-word. Factor out "R" bit handling for better coverage
analysis. Fill upper words of a quadword with zeroes for Vn_m
UNPACK with n < 4.
* sky-device.c (device_error): Made function accept varargs.
* sky-device.h (device_error): Changed declaration to match.
* interp.c (sim_open): Made 0x0000 area memory be an alias of
the K0/K1 segments. Sanitized code.
* Makefile.in (vr4320.igen) : Added.
* configure.in (mips64vr4320-*-*): Added.
* configure : Rebuilt.
* mips.igen : Correct the bfd-names in the mips-ISA model entries.
Add the vr4320 model entry and mark the vr4320 insn as necessary.
* sky-vu1.c (vu1_io_write_register_window): Make CIA (pc) write
effective by updating more registers.
* sky-libvpe.c: Updated to match earlier VU state-change code.
* sky-vpe.h: Removed unused globals from declarations.
PKE tests run identically on SPARC/Solaris and x86/Linux.
* sky-pke.c (pke_io_{read,write}_buffer): Endianness fixes aka
"E-fixes" in register and FIFO read/writes.
(pke_code_{pkemscalf,pkemscal}): E-fixes in VU CIA setting.
(pke_code_{mpg,unpack}): E-fixes in VU memory & tracking updates.
(pke_code_direct): E-fixes in GPUIF FIFO stuffing.
* sky-pke.h (PKE_MEM_WRITE): E-fixes in trace file writing.
* sky-vu0.c (vu0_attach): Allocate micro/data memory with zalloc
to guarantee sufficient (16-byte) alignment.
* sky-vu1.c (vu1_attach): Ditto.
(vu1_io_read_register_window): *PARTIAL* E-fixes in register accesses.
* sky-libvpe.c (gif_write): E-fixes in GPUIF FIFO stuffing.
* sky-gpuif.c (gif_io_{read,write}_buffer): E-fixes in
register and FIFO read/writes.
* sky-dma.c (do_dma_transfer_tag): E-fixes in tag reading.
mechanism is starting to subside.
* sky-pke.h (PKE_FLAG_INT_NOLOOP): Added device flag to indicate
presence of stalled & interrupted PKEcode.
* sky-pke.c (pke_issue): Added PKEcode interrupt bit handling.
(pke_flip_dbf): Changed double-buffering logic to match SCEI
clarification.
(pke_code_*): Added interrupt bit stalling clause.
(pke_code_pkems*): Added ITOP/ITOPS transmission code.
(pke_code_unpack): Added more careful logic for processing
overflows of VU data memory addresses.
(engine_resume_full): Keep accurate core profile data.
* cgen-utils.c (sim_disassemble_insn): Don't use
sim_core_read_aligned_N, it messes up profiling results.
* sky-pke.h (PKE_MEM_READ): Removed "read" entry from FIFO trace.
* sky-pke.c (pke_attach): Set trace file to line buffering iff
open.
(pke_io_read_buffer, pke_io_write_buffer): Handle erroneous
reads/writes by zero-padding.
(pke_io_write_buffer): Switch to more bit-field definition macros.
(pke_issue): Remove "stalled" entry from FIFO trace.
(pke_pc_advance): Correct logic for DMA-tag-skipping, PKEcode
classification.
(pke_code_mskpath3): Sketch of possible PATH3 masking method.
(pke_code_mpg): Keep order of lower/upper VU words as supplied.
(pke_code_unpack): Logic change for wl/cl/num unpacking. Weird.
little struct.
interp.c: Update. Also add floating point Max/Min functions.
mips.igen: Remove r5900 tag from any floating point instructions.
r5900.igen: Rewrite. Implement *all* floating point insns (except ld/st).
r5400.igen: Tag mdmx functions as being mdmx specific.
