The to_record_is_replaying target method is used to query record targets if
they are replaying. This is currently interpreted as "is any thread being
replayed".
Add a PTID argument and change the interpretation to "is any thread matching
PTID being replayed".
Change all users to pass minus_one_ptid to preserve the old meaning.
The record full target does not really support multi-threading and ignores
the PTID argument.
gdb/
* record-btrace.c (record_btrace_is_replaying): Add ptid argument.
Update users to pass minus_one_ptid.
* record-full.c (record_full_is_replaying): Add ptid argument (ignored).
* record.c (cmd_record_delete): Pass inferior_ptid to
target_record_is_replaying.
* target-delegates.c: Regenerated.
* target.c (target_record_is_replaying): Add ptid argument.
* target.h (struct target_ops) <to_record_is_replaying>: Add ptid
argument.
(target_record_is_replaying): Add ptid argument.
This patch implements support for exec events on extended-remote Linux
targets. Follow-exec-mode and rerun behave as expected. Catchpoints and
test updates are implemented in subsequent patches.
This patch was derived from a patch posted last October:
https://sourceware.org/ml/gdb-patches/2014-10/msg00877.html.
It was originally based on some work done by Luis Machado in 2013.
IMPLEMENTATION
----------------
Exec events are enabled via ptrace options.
When an exec event is detected by gdbserver, the existing process
data, along with all its associated lwp and thread data, is deleted
and replaced by data for a new single-threaded process. The new
process data is initialized with the appropriate parts of the state
of the execing process. This approach takes care of several potential
pitfalls, including:
* deleting the data for an execing non-leader thread before any
wait/sigsuspend occurs
* correctly initializing the architecture of the execed process
We then report the exec event using a new RSP stop reason, "exec".
When GDB receives an "exec" event, it saves the status in the event
structure's target_waitstatus field, like what is done for remote fork
events. Because the original and execed programs may have different
architectures, we skip parsing the section of the stop reply packet
that contains register data. The register data will be retrieved
later after the inferior's architecture has been set up by
infrun.c:follow_exec.
At that point the exec event is handled by the existing event handling
in GDB. However, a few changes were necessary so that
infrun.c:follow_exec could accommodate the remote target.
* Where follow-exec-mode "new" is handled, we now call
add_inferior_with_spaces instead of add_inferior with separate calls
to set up the program and address spaces. The motivation for this
is that add_inferior_with_spaces also sets up the initial architecture
for the inferior, which is needed later by target_find_description
when it calls target_gdbarch.
* We call a new target function, target_follow_exec. This function
allows us to store the execd_pathname in the inferior, instead of
using the static string remote_exec_file from remote.c. The static
string didn't work for follow-exec-mode "new", since once you switched
to the execed program, the original remote exec-file was lost. The
execd_pathname is now stored in the inferior's program space as a
REGISTRY field. All of the requisite mechanisms for this are
defined in remote.c.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_mourn): Static declaration.
(linux_arch_setup): Move in front of
handle_extended_wait.
(linux_arch_setup_thread): New function.
(handle_extended_wait): Handle exec events. Call
linux_arch_setup_thread. Make event_lwp argument a
pointer-to-a-pointer.
(check_zombie_leaders): Do not check stopped threads.
(linux_low_ptrace_options): Add PTRACE_O_TRACEEXEC.
(linux_low_filter_event): Add lwp and thread for exec'ing
non-leader thread if leader thread has been deleted.
Refactor code into linux_arch_setup_thread and call it.
Pass child lwp pointer by reference to handle_extended_wait.
(linux_wait_for_event_filtered): Update comment.
(linux_wait_1): Prevent clobbering exec event status.
(linux_supports_exec_events): New function.
(linux_target_ops) <supports_exec_events>: Initialize new member.
* lynx-low.c (lynx_target_ops) <supports_exec_events>: Initialize
new member.
* remote-utils.c (prepare_resume_reply): New stop reason 'exec'.
* server.c (report_exec_events): New global variable.
(handle_query): Handle qSupported query for exec-events feature.
(captured_main): Initialize report_exec_events.
* server.h (report_exec_events): Declare new global variable.
* target.h (struct target_ops) <supports_exec_events>: New
member.
(target_supports_exec_events): New macro.
* win32-low.c (win32_target_ops) <supports_exec_events>:
Initialize new member.
gdb/ChangeLog:
* infrun.c (follow_exec): Use process-style ptid for
exec message. Call add_inferior_with_spaces and
target_follow_exec.
* nat/linux-ptrace.c (linux_supports_traceexec): New function.
* nat/linux-ptrace.h (linux_supports_traceexec): Declare.
* remote.c (remote_pspace_data): New static variable.
(remote_pspace_data_cleanup): New function.
(get_remote_exec_file): New function.
(set_remote_exec_file_1): New function.
(set_remote_exec_file): New function.
(show_remote_exec_file): New function.
(remote_exec_file): Delete static variable.
(anonymous enum) <PACKET_exec_event_feature> New
enumeration constant.
(remote_protocol_features): Add entry for exec-events feature.
(remote_query_supported): Add client side of qSupported query
for exec-events feature.
(remote_follow_exec): New function.
(remote_parse_stop_reply): Handle 'exec' stop reason.
(extended_remote_run, extended_remote_create_inferior): Call
get_remote_exec_file and set_remote_exec_file_1.
(init_extended_remote_ops) <to_follow_exec>: Initialize new
member.
(_initialize_remote): Call
register_program_space_data_with_cleanup. Call
add_packet_config_cmd for remote exec-events feature.
Modify call to add_setshow_string_noescape_cmd for exec-file
to use new functions set_remote_exec_file and
show_remote_exec_file.
* target-debug.h, target-delegates.c: Regenerated.
* target.c (target_follow_exec): New function.
* target.h (struct target_ops) <to_follow_exec>: New member.
(target_follow_exec): Declare new function.
This patch makes the execution control code use largely the same
mechanisms in both sync- and async-capable targets. This means using
continuations and use the event loop to react to target events on sync
targets as well. The trick is to immediately mark infrun's event loop
source after resume instead of calling wait_for_inferior. Then
fetch_inferior_event is adjusted to do a blocking wait on sync
targets.
Tested on x86_64 Fedora 20, native and gdbserver, with and without
"maint set target-async off".
gdb/ChangeLog:
2015-09-09 Pedro Alves <palves@redhat.com>
* breakpoint.c (bpstat_do_actions_1, until_break_command): Don't
check whether the target can async.
* inf-loop.c (inferior_event_handler): Only call target_async if
the target can async.
* infcall.c: Include top.h and interps.h.
(run_inferior_call): For the interpreter to sync mode while
running the infcall. Call wait_sync_command_done instead of
wait_for_inferior plus normal_stop.
* infcmd.c (prepare_execution_command): Don't check whether the
target can async when running in the foreground.
(step_1): Delete synchronous case handling.
(step_once): Always install a continuation, even in sync mode.
(until_next_command, finish_forward): Don't check whether the
target can async.
(attach_command_post_wait, notice_new_inferior): Always install a
continuation, even in sync mode.
* infrun.c (mark_infrun_async_event_handler): New function.
(proceed): In sync mode, mark infrun's event source instead of
waiting for events here.
(fetch_inferior_event): If the target can't async, do a blocking
wait.
(prepare_to_wait): In sync mode, mark infrun's event source.
(infrun_async_inferior_event_handler): No longer bail out if the
target can't async.
* infrun.h (mark_infrun_async_event_handler): New declaration.
* linux-nat.c (linux_nat_wait_1): Remove calls to
set_sigint_trap/clear_sigint_trap.
(linux_nat_terminal_inferior): No longer check whether the target
can async.
* mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify
comment.
(mi_execute_command_input_handler): No longer check whether the
target is async. Update and simplify comment.
* target.c (default_target_wait): New function.
* target.h (struct target_ops) <to_wait>: Now defaults to
default_target_wait.
(default_target_wait): Declare.
* top.c (wait_sync_command_done): New function, factored out from
...
(maybe_wait_sync_command_done): ... this.
* top.h (wait_sync_command_done): Declare.
* target-delegates.c: Regenerate.
We currently set attach_flag when attaching to a process, so we should
make sure to unset it when forking a new process. Otherwise attach_flag
would remain set after forking, if the previous process associated with
the inferior was attached to.
gdb/ChangeLog:
* target.c (target_pre_inferior): Unset attach_flag.
gdb/testsuite/ChangeLog:
* gdb.base/run-after-attach.exp: New test file.
* gdb.base/run-after-attach.c: New test file.
Currently, when remote debugging, if you type Ctrl-C just while the
target stopped for an internal event, and GDB is busy doing something
that takes a while (e.g., fetching chunks of a shared library off of
the target, with vFile, to process ELF headers and debug info), the
Ctrl-C is lost.
The patch hooks up the QUIT macro to a new target method that lets the
target react to the double-Ctrl-C before the event loop is reached,
which allows reacting to a double-Ctrl-C even when GDB is busy doing
some long operation and not waiting for a stop reply. That end result
is:
(gdb) c
Continuing.
^C
^C
Interrupted while waiting for the program.
Give up waiting? (y or n) y
Quit
(gdb) info threads
Id Target Id Frame
* 1 Thread 11673 0x00007ffff7deb240 in _dl_debug_state () from target:/lib64/ld-linux-x86-64.so.2
(gdb)
If, however, GDB is waiting for a stop reply (because the target has
been resumed, with e.g., vCont;c), but the target isn't responding, we
now get:
(gdb) c
Continuing.
^C
^C
The target is not responding to interrupt requests.
Stop debugging it? (y or n) y
Disconnected from target.
(gdb) info threads
No threads.
This offers to disconnect, because when we're waiting for a stop
reply, there's nothing else we can send the target other than an
interrupt request. And if that doesn't work, there's nothing else we
can do.
The Ctrl-C is presently lost because until we get to a user-visible
stop, the SIGINT handler that is installed is the one that forwards
the interrupt to the remote side, with the \003 "packet" [1]. But,
gdbserver ignores an interrupt request if the program is stopped.
Still, even if it didn't, the server can only report back a
stop-because-of-SIGINT when the program is next resumed. And it may
take a while to actually re-resume the target.
[1] - In the old sync days, the remote target would react to a
double-Ctrl-C by asking users whether they wanted to give up waiting
and disconnect. The code is still there, but it it isn't reacheable
on most hosts, which support serial connections in async mode
(probably only DJGPP doesn't). Even then, in sync mode, remote.c's
SIGINT handler is only installed while the target is resumed, and is
removed as soon as the target sends back a stop reply. That means
that a Ctrl-C just while GDB is processing an internal event can end
up with an odd "Quit" at the prompt instead of "Program stopped by
SIGINT". In contrast, in async mode, remote.c's SIGINT handler is set
up as long as target_terminal_inferior or
target_terminal_ours_for_output are in effect (IOW, until we get a
user-visible stop and call target_terminal_ours), so the user
shouldn't get back a spurious Quit. However, it's still desirable to
be able to interrupt a long-running GDB operation, if GDB takes a
while to re-resume the target or get back to the event loop.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* defs.h (maybe_quit): Declare.
(QUIT): Now calls maybe_quit.
* event-loop.c (clear_async_signal_handler)
(async_signal_handler_is_marked): New functions.
* event-loop.h (async_signal_handler_is_marked)
(clear_async_signal_handler): New declarations.
* remote.c (remote_check_pending_interrupt): New function.
(interrupt_query): Use make_cleanup_restore_target_terminal. No
longer check whether the target is async. If waiting for a stop
reply, and a Ctrl-C as been sent to the target, offer to
disconnect, and throw TARGET_CLOSE_ERROR instead of a quit.
Otherwise do not disconnect and throw a quit.
(_initialize_remote): Install remote_check_pending_interrupt as
to_check_pending_interrupt.
* target.c (target_check_pending_interrupt): New function.
* target.h (struct target_ops) <to_check_pending_interrupt>: New
field.
(target_check_pending_interrupt): New declaration.
* utils.c (maybe_quit): New function.
* target-delegates.c: Regenerate.
GDB provides no indicator of progress during file operations, and can
appear to have locked up during slow remote transfers. This commit
updates GDB to print a warning each time a file is accessed over RSP.
An additional message detailing how to avoid remote transfers is
printed for the first transfer only.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_open>: New argument
warn_if_slow. Update comment. All implementations updated.
(target_fileio_open_warn_if_slow): New declaration.
* target.c (target_fileio_open): Renamed as...
(target_fileio_open_1): ...this. New argument warn_if_slow.
Pass warn_if_slow to implementation. Update debug printing.
(target_fileio_open): New function.
(target_fileio_open_warn_if_slow): Likewise.
* gdb_bfd.c (gdb_bfd_iovec_fileio_open): Use new function
target_fileio_open_warn_if_slow.
gdb/testsuite/ChangeLog:
* gdb.trace/pending.exp: Cope with remote transfer warnings.
With "maint set target-non-stop on" we get:
@@ -66,13 +66,16 @@ Continuing.
interrupt
(gdb) PASS: gdb.base/interrupt-noterm.exp: interrupt
-Program received signal SIGINT, Interrupt.
-PASS: gdb.base/interrupt-noterm.exp: inferior received SIGINT
-testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 0 seconds
+[process 12119] #1 stopped.
+0x0000003615ebc6d0 in __nanosleep_nocancel () at ../sysdeps/unix/syscall-template.S:81
+81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
+FAIL: gdb.base/interrupt-noterm.exp: inferior received SIGINT (timeout)
+testcase src/gdb/testsuite/gdb.base/interrupt-noterm.exp completed in 10 seconds
That is, we get "[$thread] #1 stopped" instead of SIGINT.
The issue is that we don't currently distinguish send
"interrupt/ctrl-c" to target terminal vs "stop/pause" thread well;
both cases go through "target_stop".
And then, the native Linux backend (linux-nat.c) implements
target_stop with SIGSTOP in non-stop mode, and SIGINT in all-stop
mode. Since "maint set target-non-stop on" forces the backend to be
always running in non-stop mode, even though the user-visible behavior
is "set non-stop" is "off", "interrupt" causes a SIGSTOP instead of
the SIGINT the test expects.
Fix this by introducing a target_interrupt method to use in the
"interrupt/ctrl-c" case, so "set non-stop off" can always work the
same irrespective of "maint set target-non-stop on/off". I'm
explictly considering changing the "set non-stop on" behavior as out
of scope here.
Most of the patch is an across-the-board rename of to_stop hook
implementations to to_interrupt. The only targets where something
more than a rename is being done are linux-nat.c and remote.c, which
are the only targets that support async, and thus are the only ones
the core side calls target_stop on.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* darwin-nat.c (darwin_stop): Rename to ...
(darwin_interrupt): ... this.
(_initialize_darwin_inferior): Adjust.
* gnu-nat.c (gnu_stop): Delete.
(gnu_target): Don't install gnu_stop.
* inf-ptrace.c (inf_ptrace_stop): Rename to ...
(inf_ptrace_interrupt): ... this.
(inf_ptrace_target): Adjust.
* infcmd.c (interrupt_target_1): Use target_interrupt instead of
target_stop.
* linux-nat (linux_nat_stop): Rename to ...
(linux_nat_interrupt): ... this.
(linux_nat_stop): Reimplement.
(linux_nat_add_target): Install linux_nat_interrupt.
* nto-procfs.c (nto_interrupt_twice): Rename to ...
(nto_handle_sigint_twice): ... this.
(nto_interrupt): Rename to ...
(nto_handle_sigint): ... this. Call target_interrupt instead of
target_stop.
(procfs_wait): Adjust.
(procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(init_procfs_targets): Adjust.
* procfs.c (procfs_stop): Rename to ...
(procfs_interrupt): ... this.
(procfs_target): Adjust.
* remote-m32r-sdi.c (m32r_stop): Rename to ...
(m32r_interrupt): ... this.
(init_m32r_ops): Adjust.
* remote-sim.c (gdbsim_stop_inferior): Rename to ...
(gdbsim_interrupt_inferior): ... this.
(gdbsim_stop): Rename to ...
(gdbsim_interrupt): ... this.
(gdbsim_cntrl_c): Adjust.
(init_gdbsim_ops): Adjust.
* remote.c (sync_remote_interrupt): Adjust comments.
(remote_stop_as): Rename to ...
(remote_interrupt_as): ... this.
(remote_stop): Adjust comment.
(remote_interrupt): New function.
(init_remote_ops): Install remote_interrupt.
* target.c (target_interrupt): New function.
* target.h (struct target_ops) <to_interrupt>: New field.
(target_interrupt): New declaration.
* windows-nat.c (windows_stop): Rename to ...
(windows_interrupt): ... this.
* target-delegates.c: Regenerate.
This finally implements user-visible all-stop mode running with the
target_ops backend always in non-stop mode. This is a stepping stone
towards finer-grained control of threads, being able to do interesting
things like thread groups, associating groups with breakpoints, etc.
From the user's perspective, all-stop mode is really just a special
case of being able to stop and resume specific sets of threads, so it
makes sense to do this step first.
With this, even in all-stop, the target is no longer in charge of
stopping all threads before reporting an event to the core -- the core
takes care of it when it sees fit. For example, when "next"- or
"step"-ing, we can avoid stopping and resuming all threads at each
internal single-step, and instead only stop all threads when we're
about to present the stop to the user.
The implementation is almost straight forward, as the heavy lifting
has been done already in previous patches. Basically, we replace
checks for "set non-stop on/off" (the non_stop global), with calls to
a new target_is_non_stop_p function. In a few places, if "set
non-stop off", we stop all threads explicitly, and in a few other
places we resume all threads explicitly, making use of existing
methods that were added for teaching non-stop to step over breakpoints
without displaced stepping.
This adds a new "maint set target-non-stop on/off/auto" knob that
allows both disabling the feature if we find problems, and
force-enable it for development (useful when teaching a target about
this. The default is "auto", which means the feature is enabled if a
new target method says it should be enabled. The patch implements the
method in linux-nat.c, just for illustration, because it still returns
false. We'll need a few follow up fixes before turning it on by
default. This is a separate target method from indicating regular
non-stop support, because e.g., while e.g., native linux-nat.c is
close to regression free with all-stop-non-stop (with following
patches will fixing the remaining regressions), remote.c+gdbserver
will still need more fixing, even though it supports "set non-stop
on".
Tested on x86_64 Fedora 20, native, with and without "set displaced
off", and with and without "maint set target-non-stop on"; and also
against gdbserver.
gdb/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* NEWS: Mention "maint set/show target-non-stop".
* breakpoint.c (update_global_location_list): Check
target_is_non_stop_p instead of non_stop.
* infcmd.c (attach_command_post_wait, attach_command): Likewise.
* infrun.c (show_can_use_displaced_stepping)
(can_use_displaced_stepping_p, start_step_over_inferior):
Likewise.
(internal_resume_ptid): New function.
(resume): Use it.
(proceed): Check target_is_non_stop_p instead of non_stop. If in
all-stop mode but the target is always in non-stop mode, start all
the other threads that are implicitly resumed too.
(for_each_just_stopped_thread, fetch_inferior_event)
(adjust_pc_after_break, stop_all_threads): Check
target_is_non_stop_p instead of non_stop.
(handle_inferior_event): Likewise. Handle detach-fork in all-stop
with the target always in non-stop mode.
(handle_signal_stop) <random signal>: Check target_is_non_stop_p
instead of non_stop.
(switch_back_to_stepped_thread): Check target_is_non_stop_p
instead of non_stop.
(keep_going_stepped_thread): Use internal_resume_ptid.
(stop_waiting): If in all-stop mode, and the target is in non-stop
mode, stop all threads.
(keep_going_pass): Likewise, when starting a new in-line step-over
sequence.
* linux-nat.c (get_pending_status, select_event_lwp)
(linux_nat_filter_event, linux_nat_wait_1, linux_nat_wait): Check
target_is_non_stop_p instead of non_stop.
(linux_nat_always_non_stop_p): New function.
(linux_nat_stop): Check target_is_non_stop_p instead of non_stop.
(linux_nat_add_target): Install linux_nat_always_non_stop_p.
* target-delegates.c: Regenerate.
* target.c (target_is_non_stop_p): New function.
(target_non_stop_enabled, target_non_stop_enabled_1): New globals.
(maint_set_target_non_stop_command)
(maint_show_target_non_stop_command): New functions.
(_initilize_target): Install "maint set/show target-non-stop"
commands.
* target.h (struct target_ops) <to_always_non_stop_p>: New field.
(target_non_stop_enabled): New declaration.
(target_is_non_stop_p): New declaration.
gdb/doc/ChangeLog:
2015-08-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Maintenance Commands): Document "maint set/show
target-non-stop".
That is, step past breakpoints by:
- pausing all threads
- removing breakpoint at PC
- single-step
- reinsert breakpoint
- restart threads
similarly to all-stop (with displaced stepping disabled). This allows
non-stop to work on targets/architectures without displaced stepping
support. That is, it makes displaced stepping an optimization instead
of a requirement. For example, in principle, all GNU/Linux ports
support non-stop mode at the target_ops level, but not all
corresponding gdbarch's implement displaced stepping. This should
make non-stop work for all (albeit, not as efficiently). And then
there are scenarios where even if the architecture supports displaced
stepping, we can't use it, because we e.g., don't find a usable
address to use as displaced step scratch pad. It should also fix
stepping past watchpoints on targets that have non-continuable
watchpoints in non-stop mode (e.g., PPC, untested). Running the
instruction out of line in the displaced stepping scratch pad doesn't
help that case, as the copied instruction reads/writes the same
watched memory... We can fix that too by teaching GDB to only remove
the watchpoint from the thread that we want to move past the
watchpoint (currently, removing a watchpoint always removes it from
all threads), but again, that can be considered an optimization; not
all targets would support it.
For those familiar with the gdb and gdbserver Linux target_ops
backends, the implementation should look similar, except it is done on
the core side. When we pause threads, we may find they stop with an
interesting event that should be handled later when the thread is
re-resumed, thus we store such events in the thread object, and mark
the event as pending. We should only consume pending events if the
thread is indeed resumed, thus we add a new "resumed" flag to the
thread object. At a later stage, we might add new target methods to
accelerate some of this, like "pause all threads", with corresponding
RSP packets, but we'd still need a fallback method for remote targets
that don't support such packets, so, again, that can be deferred as
optimization.
My _real_ motivation here is making it possible to reimplement
all-stop mode on top of the target always working on non-stop mode, so
that e.g., we can send RSP packets to a remote target even while the
target is running -- can't do that in the all-stop RSP variant, by
design).
Tested on x86_64 Fedora 20, with and without "set displaced off"
forced. The latter forces the new code paths whenever GDB needs to
step past a breakpoint.
gdb/ChangeLog:
2015-08-07 Pedro Alves <pedro@codesourcery.com>
* breakpoint.c (breakpoints_should_be_inserted_now): If any thread
has a pending status, return true.
* gdbthread.h: Include target/waitstatus.h.
(struct thread_suspend_state) <stop_reason, waitstatus_pending_p,
stop_pc>: New fields.
(struct thread_info) <resumed>: New field.
(set_resumed): Declare.
* infrun.c: Include "event-loop.h".
(infrun_async_inferior_event_token, infrun_is_async): New globals.
(infrun_async): New function.
(clear_step_over_info): Add debug output.
(displaced_step_in_progress_any_inferior): New function.
(displaced_step_fixup): New returns int.
(start_step_over): Handle in-line step-overs too. Assert the
thread is marked resumed.
(resume_cleanups): Clear the thread's resumed flag.
(resume): Set the thread's resumed flag. Return early if the
thread has a pending status. Allow stepping a breakpoint with no
signal.
(proceed): Adjust to check 'resumed' instead of 'executing'.
(clear_proceed_status_thread): If the thread has a pending status,
and that status is a finished step, discard the pending status.
(clear_proceed_status): Don't clear step_over_info here.
(random_pending_event_thread, do_target_wait): New functions.
(prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use
do_target_wait.
(wait_one): New function.
(THREAD_STOPPED_BY): New macro.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): New functions.
(switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New
functions.
(handle_inferior_event): Also call set_resumed(false) on all
threads implicitly stopped by the event.
(restart_threads, resumed_thread_with_pending_status): New
functions.
(finish_step_over): If we were doing an in-line step-over before,
and no longer are after trying to start a new step-over, restart
all threads. If we have multiple threads with pending events,
save the current event and go through the event loop again.
(handle_signal_stop): Return early if finish_step_over returns
false.
<random signal>: If we get a signal while stepping over a
breakpoint in-line in non-stop mode, restart all threads. Clear
step_over_info before delivering the signal.
(keep_going_stepped_thread): Use internal_error instead of
gdb_assert. Mark the thread as resumed.
(keep_going_pass_signal): Assert the thread isn't already resumed.
If some other thread is doing an in-line step-over, defer the
resume. If we just started a new in-line step-over, stop all
threads. Don't clear step_over_info.
(infrun_async_inferior_event_handler): New function.
(_initialize_infrun): Create async event handler with
infrun_async_inferior_event_handler as callback.
(infrun_async): New declaration.
* target.c (target_async): New function.
* target.h (target_async): Declare macro and readd as function
declaration.
* target/waitstatus.h (enum target_stop_reason)
<TARGET_STOPPED_BY_SINGLE_STEP>: New value.
* thread.c (new_thread): Clear the new waitstatus field.
(set_resumed): New function.
Right now this variable is initialized to 0 i.e. terminal_is_inferior
and does not get set to terminal_is_ours until target_terminal_init() is
called. This function however only gets called when an inferior is
first created. In the meantime, terminal_state would wrongly remain set
to terminal_is_inferior.
Tested on x86_64 Debian Stretch -- native, gdbserver and
extended-gdbserver.
gdb/ChangeLog:
* target.c (terminal_state): Initialize to terminal_is_ours.
We see the following regressions in testing on x86_64-linux,
reverse-step^M
Cannot access memory at address 0x2aaaaaed26c0^M
(gdb) FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
when GDB reverse step into a function, GDB wants to skip prologue so
it requests TARGET_OBJECT_CODE_MEMORY to read some code memory in
memory_xfer_partial_1. However in dcache_read_memory_partial, the object
becomes TARGET_OBJECT_MEMORY
return ops->to_xfer_partial (ops, TARGET_OBJECT_MEMORY, NULL,
myaddr, NULL, memaddr, len,
xfered_len);
in reverse debugging, ops->to_xfer_partial is record_full_core_xfer_partial
and it will return TARGET_XFER_E_IO because it can't find any records.
The test fails.
At this moment, the delegate relationship is like
dcache -> record-core -> core -> exec
and we want to GDB read memory across targets, which means if the
requested memory isn't found in record-core, GDB can read memory from
core, and exec even further if needed. I find raw_memory_xfer_partial
is exactly what I want.
gdb:
2015-07-29 Yao Qi <yao.qi@linaro.org>
PR record/18691
* dcache.c (dcache_read_memory_partial): Call
raw_memory_xfer_partial.
* target.c (raw_memory_xfer_partial): Make it non-static.
* target.h (raw_memory_xfer_partial): Declare.
This should be just a move with no changes.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Move linux_find_memory_regions_full & co.
* linux-tdep.c (nat/linux-maps.h): Include.
(gdb_regex.h): Remove the include.
(enum filterflags, struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Moved to nat/linux-maps.c.
(linux_find_memory_region_ftype): Moved typedef to nat/linux-maps.h.
(linux_find_memory_regions_full): Moved definition to nat/linux-maps.c.
* nat/linux-maps.c: Include ctype.h, target/target-utils.h, gdb_regex.h
and target/target.h.
(struct smaps_vmflags, read_mapping, decode_vmflags)
(mapping_is_anonymous_p, dump_mapping_p): Move from linux-tdep.c.
(linux_find_memory_regions_full): Move from linux-tdep.c.
* nat/linux-maps.h (read_mapping): New declaration.
(linux_find_memory_region_ftype, enum filterflags): Moved from
linux-tdep.c.
(linux_find_memory_regions_full): New declaration.
* target.c (target/target-utils.h): Include.
(read_alloc_pread_ftype): Moved typedef to target/target-utils.h.
(read_alloc, read_stralloc_func_ftype, read_stralloc): Moved
definitions to target/target-utils.c.
* target.h (target_fileio_read_stralloc): Move it to target/target.h.
* target/target-utils.c (read_alloc, read_stralloc): Move definitions
from target.c.
* target/target-utils.h (read_alloc_pread_ftype): New typedef.
(read_alloc): New declaration.
(read_stralloc_func_ftype): New typedef.
(read_stralloc): New declaration.
* target/target.h (target_fileio_read_stralloc): Move it from target.h.
gdb/gdbserver/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
* target.c: Include target/target-utils.h and fcntl.h.
(target_fileio_read_stralloc_1_pread, target_fileio_read_stralloc_1)
(target_fileio_read_stralloc): New functions.
Prepare code for move into gdb/common/.
gdb/ChangeLog
2015-07-15 Aleksandar Ristovski <aristovski@qnx.com
Jan Kratochvil <jan.kratochvil@redhat.com>
Prepare linux_find_memory_regions_full & co. for move.
* linux-tdep.c (linux_find_memory_region_ftype): Comment.
(linux_find_memory_regions_full): Change signature and prepare
for moving to linux-maps.
(linux_find_memory_regions_data): Rename field 'obfd' to 'data'.
(linux_find_memory_regions_thunk): New.
(linux_find_memory_regions_thunk): Use 'data' field instead of 'obfd'.
(linux_find_memory_regions_gdb): New.
(linux_find_memory_regions): Rename argument 'obfd' to 'func_data'.
(linux_make_mappings_corefile_notes): Use
linux_find_memory_regions_gdb.
* target.c (read_alloc_pread_ftype): New typedef.
(target_fileio_read_alloc_1_pread): New function.
(read_alloc): Refactor from target_fileio_read_alloc_1.
(read_stralloc_func_ftype): New typedef.
(target_fileio_read_alloc_1): New implementation. Use read_alloc.
(read_stralloc): Refactored from target_fileio_read_stralloc.
(target_fileio_read_stralloc): New implementation, use read_stralloc.
If we are reading/writing from a memory object, the length represents
the number of "addresses" to read/write, so the addressable unit size
needs to be taken into account when allocating memory on gdb's side.
gdb/ChangeLog:
* target.c (target_read): Consider addressable unit size when
reading from a memory object.
(read_memory_robust): Same.
(read_whatever_is_readable): Same.
(target_write_with_progress): Consider addressable unit size
when writing to a memory object.
* target.h (target_read): Update documentation.
(target_write): Add documentation.
This contains various cleanups in the target memory read and write code.
They are not directly related to the non-8-bits changes, but they
clarify things a bit down the line.
gdb/ChangeLog:
* target.c (target_read): Rename variables and use
TARGET_XFER_E_IO.
(target_read_with_progress): Same.
(read_memory_robust): Constify parameters and rename
variables.
(read_whatever_is_readable): Constify parameters,
rename variables, adjust formatting.
* target.h (read_memory_robust): Constify parameters.
This commit adds a new argument to all target_fileio functions with
filename arguments to allow the desired inferior to be specified.
This allows GDB to support systems where processes do not necessarily
share a common filesystem.
gdb/ChangeLog:
* target.h (struct inferior): New forward declaration.
(struct target_ops) <to_filesystem_is_local>: Update comment.
(struct target_ops) <to_fileio_open>: New argument inf.
Update comment. All implementations updated.
(struct target_ops) <to_fileio_unlink>: Likewise.
(struct target_ops) <to_fileio_readlink>: Likewise.
(target_filesystem_is_local): Update comment.
(target_fileio_open): New argument inf. Update comment.
(target_fileio_unlink): Likewise.
(target_fileio_readlink): Likewise.
(target_fileio_read_alloc): Likewise.
(target_fileio_read_stralloc): Likewise.
* target.c (target_fileio_open): New argument inf.
Pass inf to implementation. Update debug printing.
(target_fileio_unlink): Likewise.
(target_fileio_readlink): Likewise.
(target_fileio_read_alloc_1): New argument inf. Pass inf
to target_fileio_open.
(target_fileio_read_alloc): New argument inf. Pass inf to
target_fileio_read_alloc_1.
(target_fileio_read_stralloc): Likewise.
* gdb_bfd.c (inferior.h): New include.
(gdb_bfd_iovec_fileio_open): Replace unused "open_closure"
argument with new argument "inferior". Pass inferior to
target_fileio_open.
(gdb_bfd_open): Supply inferior argument to
gdb_bfd_iovec_fileio_open.
* linux-tdep.c (linux_info_proc): Supply inf argument to
relevant target_fileio calls.
(linux_find_memory_regions_full): Likewise.
(linux_fill_prpsinfo): Likewise.
* remote.c (remote_filesystem_is_local): Supply inf
argument to remote_hostio_open.
(remote_file_put): Likewise.
(remote_file_get): Likewise.
(remote_file_delete): Supply inf argument to
remote_hostio_unlink.
This commit introduces a new target method target_fileio_fstat
which can be used to retrieve information about files opened with
target_fileio_open.
gdb/ChangeLog:
* target.h (struct target_ops) <to_fileio_fstat>: New field.
(target_fileio_fstat): New declaration.
* target.c (target_fileio_fstat): New function.
* inf-child.c (inf_child_fileio_fstat): Likewise.
(inf_child_target): Initialize to_fileio_fstat.
* remote.c (init_remote_ops): Likewise.
Various target_fileio_* functions use integer file descriptors to
refer to open files. File operation functions are looked up from
the target stack as they are used, which causes problems if the
target stack changes after the file is opened.
For example, if a file is opened on a remote target and the remote
target disconnects or closes the remote target will be popped off
the stack. If target_fileio_close is then called on that file and
"set auto-connect-native-target" is "on" (the default) then the
native target's close method will be called. If the file opened
on the remote happens to share the same number with a file open in
GDB then that file will be closed by mistake.
This commit changes target_fileio_open to store newly opened file
descriptors in a table together with the target_ops used to open
them. The index into the table is returned and used as the file
descriptor argument to all target_fileio_* functions that accept
file descriptor arguments.
gdb/ChangeLog:
* target.c (fileio_ft_t): New typedef, define object vector.
(fileio_fhandles): New static variable.
(is_closed_fileio_fh): New macro.
(lowest_closed_fd): New static variable.
(acquire_fileio_fd): New function.
(release_fileio_fd): Likewise.
(fileio_fd_to_fh): New macro.
(target_fileio_open): Wrap the file descriptor on success.
(target_fileio_pwrite): Updated to use wrapped file descriptor.
(target_fileio_pread): Likewise.
(target_fileio_close): Likewise.
This patch splits the TRY_CATCH macro into three, so that we go from
this:
~~~
volatile gdb_exception ex;
TRY_CATCH (ex, RETURN_MASK_ERROR)
{
}
if (ex.reason < 0)
{
}
~~~
to this:
~~~
TRY
{
}
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
~~~
Thus, we'll be getting rid of the local volatile exception object, and
declaring the caught exception in the catch block.
This allows reimplementing TRY/CATCH in terms of C++ exceptions when
building in C++ mode, while still allowing to build GDB in C mode
(using setjmp/longjmp), as a transition step.
TBC, after this patch, is it _not_ valid to have code between the TRY
and the CATCH blocks, like:
TRY
{
}
// some code here.
CATCH (ex, RETURN_MASK_ERROR)
{
}
END_CATCH
Just like it isn't valid to do that with C++'s native try/catch.
By switching to creating the exception object inside the CATCH block
scope, we can get rid of all the explicitly allocated volatile
exception objects all over the tree, and map the CATCH block more
directly to C++'s catch blocks.
The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was
done with a script, rerun from scratch at every rebase, no manual
editing involved. After the mechanical conversion, a few places
needed manual intervention, to fix preexisting cases where we were
using the exception object outside of the TRY_CATCH block, and cases
where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH
after this patch]. The result was folded into this patch so that GDB
still builds at each incremental step.
END_CATCH is necessary for two reasons:
First, because we name the exception object in the CATCH block, which
requires creating a scope, which in turn must be closed somewhere.
Declaring the exception variable in the initializer field of a for
block, like:
#define CATCH(EXCEPTION, mask) \
for (struct gdb_exception EXCEPTION; \
exceptions_state_mc_catch (&EXCEPTION, MASK); \
EXCEPTION = exception_none)
would avoid needing END_CATCH, but alas, in C mode, we build with C90,
which doesn't allow mixed declarations and code.
Second, because when TRY/CATCH are wired to real C++ try/catch, as
long as we need to handle cleanup chains, even if there's no CATCH
block that wants to catch the exception, we need for stop at every
frame in the unwind chain and run cleanups, then rethrow. That will
be done in END_CATCH.
After we require C++, we'll still need TRY/CATCH/END_CATCH until
cleanups are completely phased out -- TRY/CATCH in C++ mode will
save/restore the current cleanup chain, like in C mode, and END_CATCH
catches otherwise uncaugh exceptions, runs cleanups and rethrows, so
that C++ cleanups and exceptions can coexist.
IMO, this still makes the TRY/CATCH code look a bit more like a
newcomer would expect, so IMO worth it even if we weren't considering
C++.
gdb/ChangeLog.
2015-03-07 Pedro Alves <palves@redhat.com>
* common/common-exceptions.c (struct catcher) <exception>: No
longer a pointer to volatile exception. Now an exception value.
<mask>: Delete field.
(exceptions_state_mc_init): Remove all parameters. Adjust.
(exceptions_state_mc): No longer pop the catcher here.
(exceptions_state_mc_catch): New function.
(throw_exception): Adjust.
* common/common-exceptions.h (exceptions_state_mc_init): Remove
all parameters.
(exceptions_state_mc_catch): Declare.
(TRY_CATCH): Rename to ...
(TRY): ... this. Remove EXCEPTION and MASK parameters.
(CATCH, END_CATCH): New.
All callers adjusted.
gdb/gdbserver/ChangeLog:
2015-03-07 Pedro Alves <palves@redhat.com>
Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH
instead.
record-btrace was the only target making use of this, and it no longer
uses it.
gdb/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* target.h (struct target_ops) <to_decr_pc_after_break>: Delete.
(target_decr_pc_after_break): Delete declaration.
* target.c (default_target_decr_pc_after_break)
(target_decr_pc_after_break): Delete.
* linux-nat.c (check_stopped_by_breakpoint, linux_nat_wait_1): Use
gdbarch_decr_pc_after_break instead of target_decr_pc_after_break.
* linux-thread-db.c (check_event): Likewise.
* infrun.c (adjust_pc_after_break): Likewise.
* darwin-nat.c (cancel_breakpoint): Likewise.
* aix-thread.c (aix_thread_wait): Likewise.
* target-delegates.c: Regenerate.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Add a format argument to the various supports_btrace functions to check
for support of a specific btrace format. This is to prepare for a new
format.
Removed two redundant calls. The check will be made in the subsequent
btrace_enable call.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (btrace_enable): Pass BTRACE_FORMAT_BTS.
* record-btrace.c (record_btrace_open): Remove call to
target_supports_btrace.
* remote.c (remote_supports_btrace): Update parameters.
* target.c (target_supports_btrace): Update parameters.
* target.h (to_supports_btrace, target_supports_btrace): Update
parameters.
* target-delegates.c: Regenerate.
* target-debug.h (target_debug_print_enum_btrace_format): New.
* nat/linux-btrace.c
(kernel_supports_btrace): Rename into ...
(kernel_supports_bts): ... this. Update users. Update warning text.
(intel_supports_btrace): Rename into ...
(intel_supports_bts): ... this. Update users.
(cpu_supports_btrace): Rename into ...
(cpu_supports_bts): ... this. Update users.
(linux_supports_btrace): Update parameters. Split into this and ...
(linux_supports_bts): ... this.
* nat/linux-btrace.h (linux_supports_btrace): Update parameters.
gdbserver/
* server.c (handle_btrace_general_set): Remove call to
target_supports_btrace.
(supported_btrace_packets): New.
(handle_query): Call supported_btrace_packets.
* target.h: include btrace-common.h.
(btrace_target_info): Removed.
(supports_btrace, target_supports_btrace): Update parameters.
Add a structure to hold the branch trace data and an enum to describe
the format of that data. So far, only BTS is supported. Also added
a NONE format to indicate that no branch trace data is available.
This will make it easier to support different branch trace formats in
the future.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (SFILES): Add common/btrace-common.c.
(COMMON_OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* btrace.c (parse_xml_btrace): Update parameters.
(parse_xml_btrace_block): Set format field.
(btrace_add_pc, btrace_fetch): Use struct btrace_data.
(do_btrace_data_cleanup, make_cleanup_btrace_data): New.
(btrace_compute_ftrace): Split into this and...
(btrace_compute_ftrace_bts): ...this.
(btrace_stitch_trace): Split into this and...
(btrace_stitch_bts): ...this.
* btrace.h (parse_xml_btrace): Update parameters.
(make_cleanup_btrace_data): New.
* common/btrace-common.c: New.
* common/btrace-common.h: Include common-defs.h.
(btrace_block_s): Update comment.
(btrace_format): New.
(btrace_format_string): New.
(btrace_data_bts): New.
(btrace_data): New.
(btrace_data_init, btrace_data_fini, btrace_data_empty): New.
* remote.c (remote_read_btrace): Update parameters.
* target.c (target_read_btrace): Update parameters.
* target.h (target_read_btrace): Update parameters.
(target_ops)<to_read_btrace>: Update parameters.
* x86-linux-nat.c (x86_linux_read_btrace): Update parameters.
* target-delegates.c: Regenerate.
* target-debug (target_debug_print_struct_btrace_data_p): New.
* nat/linux-btrace.c (linux_read_btrace): Split into this and...
(linux_read_bts): ...this.
* nat/linux-btrace.h (linux_read_btrace): Update parameters.
gdbserver/
* Makefile.in (SFILES): Add common/btrace-common.c.
(OBS): Add common/btrace-common.o.
(btrace-common.o): Add build rules.
* linux-low: Include btrace-common.h.
(linux_low_read_btrace): Use struct btrace_data. Call
btrace_data_init and btrace_data_fini.
This patch introduces find_inferior_ptid to replace the common idiom
find_inferior_pid (ptid_get_pid (...));
It replaces all the instances of that idiom that I found with the new
function.
No significant changes before/after the patch in the regression suite
on amd64 linux.
gdb/ChangeLog:
* inferior.c (find_inferior_ptid): New function.
* inferior.h (find_inferior_ptid): New declaration.
* ada-tasks.c (ada_get_task_number): Use find_inferior_ptid.
* corelow.c (core_pid_to_str): Same.
* darwin-nat.c (darwin_resume): Same.
* infrun.c (fetch_inferior_event): Same.
(get_inferior_stop_soon): Same.
(handle_inferior_event): Same.
(handle_signal_stop): Same.
* linux-nat.c (resume_lwp): Same.
(stop_wait_callback): Same.
* mi/mi-interp.c (mi_new_thread): Same.
(mi_thread_exit): Same.
* proc-service.c (ps_pglobal_lookup): Same.
* record-btrace.c (record_btrace_step_thread): Same.
* remote-sim.c (gdbsim_close_inferior): Same.
(gdbsim_resume): Same.
(gdbsim_stop): Same.
* sol2-tdep.c (sol2_core_pid_to_str): Same.
* target.c (memory_xfer_partial_1): Same.
(default_thread_address_space): Same.
* thread.c (thread_change_ptid): Same.
(switch_to_thread): Same.
(do_restore_current_thread_cleanup): Same.
When a thread exits, the terminal is left in mode "terminal_is_ours"
while the target executes. This patch fixes that.
We need to manually restore the terminal setting in this particular
observer. In the case of the other MI observers that call
target_terminal_ours, gdb will end up resuming the inferior later in the
execution and call target_terminal_inferior. In the case of the thread
exit event, we still need to call target_terminal_ours to be able to
print something, but there is nothing that gdb will need to resume after
that. We therefore need to call target_terminal_inferior ourselves.
gdb/ChangeLog:
PR gdb/17627
* target.c (cleanup_restore_target_terminal): New function.
(make_cleanup_restore_target_terminal): New function.
* target.h (make_cleanup_restore_target_terminal): New
declaration.
* mi/mi-interp.c (mi_thread_exit): Use the new cleanup.
Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
Jan caught an intermittent GDB crash with the annota1.exp test:
Starting program: .../gdb/testsuite/gdb.base/annota1 ^M
[...]
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
[...]
readline: readline_callback_read_char() called with no handler!^M
ERROR: Process no longer exists
All we need to is to continue the inferior in the foreground, and type
a command while the inferior is running. E.g.:
(gdb) set annotate 2
▒▒pre-prompt
(gdb)
▒▒prompt
c
▒▒post-prompt
Continuing.
▒▒starting
▒▒frames-invalid
*inferior is running now*
p 1<ret>
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
When we run a foreground execution command we call
target_terminal_inferior to stop GDB from processing input, and to put
the inferior's terminal settings in effect. Then we tell readline to
hide the prompt with display_gdb_prompt, which clears readline's input
callback too. When the target stops, we call target_terminal_ours,
which re-installs stdin in the event loop, and then we redisplay the
prompt, reinstalling the readline callbacks.
However, when annotations are in effect, the "frames-invalid"
annotation code calls target_terminal_ours after 'resume' had already
called target_terminal_inferior:
(top-gdb) bt
#0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219
#1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705
#2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612
#3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136
#4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263
#5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613
And then once we hide the prompt and remove readline's input handler
callback, we're in a bad state. We end up with the target running
supposedly in the foreground, but with stdin still installed on the
event loop. Any input then calls into readline, which aborts because
no rl_linefunc callback handler is installed:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
During symbol reading, debug info gives source 9 included from file at zero line 0.
During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1.
#2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116
#3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167
#4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373
#5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763
#6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340
#7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404
#8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429
#9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182
#10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318
#11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323
#12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151
#14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159
#16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32
The fix is to make the annotation code call target_terminal_inferior
again after printing, if the inferior's settings were in effect.
While at it, when we're doing output only, instead of
target_terminal_ours, we should call target_terminal_ours_for_output.
The latter doesn't actually remove stdin from the event loop, and also
leaves SIGINT forwarded to the target.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* annotate.c (annotate_breakpoints_invalid): Use
target_terminal_our_for_output instead of target_terminal_ours.
Give back the terminal to the target.
(annotate_frames_invalid): Likewise.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.
I found a place that should be giving back the terminal to the target,
but only if the target was already owning it. So I need to add a
getter for who owns the terminal.
The trouble is that several places/target have their own globals to
track this state:
- inflow.c:terminal_is_ours
- remote.c:remote_async_terminal_ours_p
- linux-nat.c:async_terminal_is_ours
- go32-nat.c:terminal_is_ours
While one might think of adding a new target_ops method to query this,
conceptually, this state isn't really part of a particular target_ops.
Considering multi-target, the core shouldn't have to ask all targets
to know whether it's GDB that owns the terminal. There's only one GDB
(or rather, only one top level interpreter).
So what this comment does is add a new global that is tracked by the
core instead. A subsequent pass may later remove the other globals.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* target.c (enum terminal_state): New enum.
(terminal_state): New global.
(target_terminal_init): New function.
(target_terminal_inferior): Skip if inferior already owns the
terminal.
(target_terminal_ours, target_terminal_ours_for_output): New
functions.
* target.h (target_terminal_init): Convert to function prototype.
(target_terminal_ours_for_output): Convert to function prototype
and tweak comment.
(target_terminal_ours): Convert to function prototype and tweak
comment.
* windows-nat.c (do_initial_windows_stuff): Call
target_terminal_init instead of child_terminal_init_with_pgrp.
When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:
update_thread_list (void)
{
prune_threads ();
target_find_new_threads ();
update_threads_executing ();
}
And then prune_threads does:
prune_threads (void)
{
struct thread_info *tp, *next;
for (tp = thread_list; tp; tp = next)
{
next = tp->next;
if (!thread_alive (tp))
delete_thread (tp->ptid);
}
}
Calling thread_live on each thread one by one is expensive.
E.g., on Linux, it ends up doing kill(SIG0) once for each thread. Not
a big deal, but still a bunch of syscalls...
With the remote target, it's cumbersome. That thread_alive call ends
up generating one T packet per thread:
Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n
That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.
This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.
Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.
The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that. It's meant to be a no-op.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this. Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this. Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this. Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this. Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this. Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this. Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this. Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this. Call prune_threads. Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.
Currently, with "set breakpoint auto-hw off", we'll still try to
insert a software breakpoint at addresses covered by supposedly
read-only or inacessible regions:
(top-gdb) mem 0x443000 0x450000 ro
(top-gdb) set mem inaccessible-by-default off
(top-gdb) disassemble
Dump of assembler code for function main:
0x0000000000443956 <+34>: movq $0x0,0x10(%rax)
=> 0x000000000044395e <+42>: movq $0x0,0x18(%rax)
0x0000000000443966 <+50>: mov -0x24(%rbp),%eax
0x0000000000443969 <+53>: mov %eax,-0x20(%rbp)
End of assembler dump.
(top-gdb) b *0x0000000000443969
Breakpoint 5 at 0x443969: file ../../src/gdb/gdb.c, line 29.
(top-gdb) c
Continuing.
warning: cannot set software breakpoint at readonly address 0x443969
Breakpoint 5, 0x0000000000443969 in main (argc=1, argv=0x7fffffffd918) at ../../src/gdb/gdb.c:29
29 args.argc = argc;
(top-gdb)
We warn, saying that the insertion can't be done, but then proceed
attempting the insertion anyway, and in case of manually added
regions, the insert actually succeeds.
This is a regression; GDB used to fail inserting the breakpoint. More
below.
I stumbled on this as I wrote a test that manually sets up a read-only
memory region with the "mem" command, in order to test GDB's behavior
with breakpoints set on read-only regions, even when the real memory
the breakpoints are set at isn't really read-only. I wanted that in
order to add a test that exercises software single-stepping through
read-only regions.
Note that the memory regions that target_memory_map returns aren't
like e.g., what would expect to see in /proc/PID/maps on Linux.
Instead, they're the physical memory map from the _debuggers_
perspective. E.g., a read-only region would be real ROM or flash
memory, while a read-only+execute mapping in /proc/PID/maps is still
read-write to the debugger (otherwise the debugger wouldn't be able to
set software breakpoints in the code segment).
If one tries to manually write to memory that falls within a memory
region that is known to be read-only, with e.g., "p foo = 1", then we
hit a check in memory_xfer_partial_1 before the write mananges to make
it to the target side.
But writing a software/memory breakpoint nowadays goes through
target_write_raw_memory, and unlike when writing memory with
TARGET_OBJECT_MEMORY, nothing on the TARGET_OBJECT_RAW_MEMORY path
checks whether we're trying to write to a read-only region.
At the time "breakpoint auto-hw" was added, we didn't have the
TARGET_OBJECT_MEMORY vs TARGET_OBJECT_RAW_MEMORY target object
distinction yet, and the code path in memory_xfer_partial that blocks
writes to read-only memory was hit for memory breakpoints too. With
GDB 6.8 we had:
warning: cannot set software breakpoint at readonly address 0000000000443943
Warning:
Cannot insert breakpoint 1.
Error accessing memory address 0x443943: Input/output error.
So I started out by fixing this by adding the memory region validation
to TARGET_OBJECT_RAW_MEMORY too.
But later, when testing against GDBserver, I realized that that would
only block software/memory breakpoints GDB itself inserts with
gdb/mem-break.c. If a target has a to_insert_breakpoint method, the
insertion request will still pass through to the target. So I ended
up converting the "cannot set breakpoint" warning in breakpoint.c to a
real error return, thus blocking the insertion sooner.
With that, we'll end up no longer needing the TARGET_OBJECT_RAW_MEMORY
changes once software single-step breakpoints are converted to real
breakpoints. We need them today as software single-step breakpoints
bypass insert_bp_location. But, it'll be best to leave that in as
safeguard anyway, for other direct uses of TARGET_OBJECT_RAW_MEMORY.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-01 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location): Error out if inserting a
software breakpoint at a read-only address.
* target.c (memory_xfer_check_region): New function, factored out
from ...
(memory_xfer_partial_1): ... this. Make the 'reg_len' local a
ULONGEST.
(target_xfer_partial) <TARGET_OBJECT_RAW_MEMORY>: Check the access
against the memory region attributes.
gdb/testsuite/
2014-10-01 Pedro Alves <palves@redhat.com>
* gdb.base/breakpoint-in-ro-region.c: New file.
* gdb.base/breakpoint-in-ro-region.exp: New file.
This commit renames target_stop_ptid as target_stop_and_wait and
target_continue_ptid as target_continue_no_signal. Comments are
updated to more fully describe the functions' behaviour.
gdb/ChangeLog:
* target/target.h (target_stop_ptid): Renamed as...
(target_stop_and_wait): New function. Updated comment.
All uses updated.
(target_continue_ptid): Renamed as...
(target_continue_no_signal): New function. Updated comment.
All uses updated.
This commit introduces two new functions to stop and restart target
processes that shared code can use and that clients must implement.
It also changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h (target_stop_ptid, target_continue_ptid):
Declare.
* target.c (target_stop_ptid, target_continue_ptid): New
functions.
* common/agent.c [!GDBSERVER]: Don't include infrun.h.
(agent_run_command): Always use target_stop_ptid and
target_continue_ptid.
gdb/gdbserver/ChangeLog:
* target.c (target_stop_ptid, target_continue_ptid): New
functions.
This introduces target/target.h. This file declares some functions
that the shared code can use and that clients must implement. It also
changes some shared code to use these functions.
gdb/ChangeLog:
* target/target.h: New file.
* Makefile.in (HFILES_NO_SRCDIR): Add target/target.h.
* target.h: Include target/target.h.
(target_read_memory, target_write_memory): Don't declare.
* target.c (target_read_uint32): New function.
* common/agent.c: Include target/target.h.
[!GDBSERVER]: Don't include target.h.
(helper_thread_id): Type changed to uint32_t.
(agent_get_helper_thread_id): Use target_read_uint32.
(agent_run_command): Always use target_read_memory and
target_write_memory.
(agent_capability): Type changed to uint32_t.
(agent_capability_check): Use target_read_uint32.
gdb/gdbserver/ChangeLog:
* target.h: Include target/target.h.
* target.c (target_read_memory, target_read_uint32)
(target_write_memory): New functions.
I thought that this home made implementation of a vector could be
replaced by the more standard VEC. The implementation seems to predate
the introduction of vec.h, so that would explain why it exists.
Ran make check before and after, no new failures.
gdb/ChangeLog:
2014-08-19 Simon Marchi <simon.marchi@ericsson.com>
* target.c (target_struct_size): Remove.
(target_struct_allocsize): Remove.
(DEFAULT_ALLOCSIZE): Remove.
(target_ops_p): New typedef.
(DEF_VEC_P (target_ops_p)): New vector type.
(target_structs): Change type to VEC (target_ops_p).
(add_target_with_completer): Replace "push" code by VEC_safe_push.
(find_default_run_target): Rewrite for loop following changes to
target_structs.
This commit moves the inclusion of errno.h to common-defs.h and
removes all other inclusions. Note that prior to this commit
server.h included errno.h protected by "#ifdef HAVE_ERRNO_H".
This protection was added with the Windows CE port, which is
currently broken. Since no other platform needs this, I have
removed the protection and the configury to support it.
gdb/
2014-08-07 Gary Benson <gbenson@redhat.com>
* common/common-defs.h: Include errno.h.
* defs.h: Do not include errno.h.
* ada-typeprint.c: Likewise.
* c-typeprint.c: Likewise.
* core-regset.c: Likewise.
* corefile.c: Likewise.
* corelow.c: Likewise.
* event-loop.c: Likewise.
* f-typeprint.c: Likewise.
* gnu-nat.c: Likewise.
* go32-nat.c: Likewise.
* i386gnu-nat.c: Likewise.
* m2-typeprint.c: Likewise.
* nat/linux-btrace.c: Likewise.
* p-typeprint.c: Likewise.
* procfs.c: Likewise.
* remote-sim.c: Likewise.
* rs6000-nat.c: Likewise.
* target.c: Likewise.
* typeprint.c: Likewise.
* ui-file.c: Likewise.
* valops.c: Likewise.
* valprint.c: Likewise.
gdb/gdbserver/
2014-08-07 Gary Benson <gbenson@redhat.com>
* configure.ac (AC_CHECK_HEADERS): Remove errno.h.
* configure: Regenerate.
* config.in: Likewise.
* server.h: Do not include errno.h.
* event-loop.c: Likewise.
* hostio-errno.c: Likewise.
* linux-low.c: Likewise.
* remote-utils.c: Likewise.
* spu-low.c: Likewise.
* utils.c: Likewise.
* gdbreplay.c: Unconditionally include errno.h.
Right now, "set debug target" acts a bit strangely.
Most target APIs only notice that it has changed when the target stack
is changed in some way. This is because many methods implement the
setting using the special debug target. However, a few spots do
change their behavior immediately -- any place explicitly checking
"targetdebug".
Some of this peculiar behavior is documented. However, I think that
it just isn't very useful for it to work this way. So, this patch
changes "set debug target" to take effect immediately in all cases.
This is done by simply calling update_current_target when the setting
is changed.
This required one small change in the test suite. Here a test was
expecting the current behavior.
Built and regtested on x86-64 Fedora 20.
2014-08-04 Tom Tromey <tromey@redhat.com>
* target.c (set_targetdebug): New function.
(initialize_targets): Pass set_targetdebug when creating "set
debug target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Debugging Output): Update for change to "set debug
target".
2014-08-04 Tom Tromey <tromey@redhat.com>
* gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
target 0".
This is a follow-on to the patch to auto-generate target debug methods.
While working on that patch I noticed that the to_open debug setting
will never work. There is no path by which debug_to_open can be
called.
This patch fixes the problem by using a generic function as the
implementation of the various "target" subcommands, and then putting
the debug printing there.
This is also a tiny step toward fixing PR 7250 (and apparently why
command contexts were introduced).
Built and regtested on x86-64 Fedora 20.
2014-07-30 Tom Tromey <tromey@redhat.com>
* target.c (open_target): New function.
(add_target_with_completer, add_deprecated_target_alias): Use
set_cmd_sfunc, set_cmd_context.
(debug_to_open): Remove.
(setup_target_debug): Update.
While working on target_is_pushed, I noticed that it is written in a
strange way. The code currently keeps an extra indirection, where a
simple linked list traversal is all that is needed. It seems likely
this was done by copying and pasting other code. However, there is no
reason to do this and the more obvious code is simpler to reason
about. So, this patch change the implementation.
2014-07-29 Tom Tromey <tromey@redhat.com>
* target.c (target_is_pushed): Simplify.
The target debug methods are inconsistently maintained. Most to_*
methods have some kind of targetdebug awareness, but not all of them
do. The ones that do vary in the quantity and quality of output they
generate.
This patch changes most of the target debug methods to be
automatically generated. All the arguments are printed, and separate
lines are printed for entering and existing the outermost call to the
target stack.
For example now you'd see:
-> multi-thread->to_terminal_ours (...)
-> multi-thread->to_is_async_p (...)
<- multi-thread->to_is_async_p (0x1ebb580) = 1
<- multi-thread->to_terminal_ours (0x1ebb580)
-> multi-thread->to_thread_address_space (...)
<- multi-thread->to_thread_address_space (0x1ebb580, 26802) = 1
In this case you can see nested calls. The "multi-thread" on the left
hand side is the topmost target's shortname.
There are some oddities with this patch. I'm on the fence about it
all, I really just wrote it on a whim.
It's not simple to convert every possible method, since a few don't
participate in target delegation.
Printing is done by type, so I introduced some new
debug-printing-specific typedefs to handle cases where it is nicer to
do something else.
On the plus side, this lays the groundwork for making targetdebug
affect every layer of the target stack. The idea would be to wrap
each target_ops in the stack with its own debug_target, and then you
could see calls propagate down the stack and back up; I suppose with
indentation to make it prettier. (That said there are some gotchas
lurking in this idea due to target stack introspection.)
Regtested on x86-64 Fedora 20.
2014-07-24 Tom Tromey <tromey@redhat.com>
* make-target-delegates (munge_type, write_debugmethod): New
functions.
(debug_names): New global.
($TARGET_DEBUG_PRINTER): New global.
(write_function_header): Strip TARGET_DEBUG_PRINTER from the type
name.
Write debug methods. Generate init_debug_target.
* target-debug.h: New file.
* target-delegates.c: Rebuild.
* target.c: Include target-debug.h.
(debug_target): Hoist definition.
(target_kill, target_get_section_table, target_memory_map)
(target_flash_erase, target_flash_done, target_detach)
(target_disconnect, target_wait, target_resume)
(target_pass_signals, target_program_signals, target_follow_fork)
(target_mourn_inferior, target_search_memory)
(target_thread_address_space, target_close)
(target_find_new_threads, target_core_of_thread)
(target_verify_memory, target_insert_mask_watchpoint)
(target_remove_mask_watchpoint): Remove targetdebug code.
(debug_to_post_attach, debug_to_prepare_to_store)
(debug_to_files_info, debug_to_insert_breakpoint)
(debug_to_remove_breakpoint, debug_to_can_use_hw_breakpoint)
(debug_to_region_ok_for_hw_watchpoint)
(debug_to_can_accel_watchpoint_condition)
(debug_to_stopped_by_watchpoint, debug_to_stopped_data_address)
(debug_to_watchpoint_addr_within_range)
(debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint)
(debug_to_insert_watchpoint, debug_to_remove_watchpoint)
(debug_to_terminal_init, debug_to_terminal_inferior)
(debug_to_terminal_ours_for_output, debug_to_terminal_ours)
(debug_to_terminal_save_ours, debug_to_terminal_info)
(debug_to_load, debug_to_post_startup_inferior)
(debug_to_insert_fork_catchpoint)
(debug_to_remove_fork_catchpoint)
(debug_to_insert_vfork_catchpoint)
(debug_to_remove_vfork_catchpoint)
(debug_to_insert_exec_catchpoint)
(debug_to_remove_exec_catchpoint, debug_to_has_exited)
(debug_to_can_run, debug_to_thread_architecture, debug_to_stop)
(debug_to_rcmd, debug_to_pid_to_exec_file): Remove.
(setup_target_debug): Call init_debug_target.
* target.h (TARGET_DEBUG_PRINTER): New macro.
(struct target_ops) <to_resume, to_wait, to_pass_signals,
to_program_signals>: Use TARGET_DEBUG_PRINTER.
This fixes PR gdb/17130.
The bug is that some code in utils.c was not updated during the target
delegation change:
if (job_control
/* If there is no terminal switching for this target, then we can't
possibly get screwed by the lack of job control. */
|| current_target.to_terminal_ours == NULL)
fatal ("Quit");
else
fatal ("Quit (expect signal SIGINT when the program is resumed)");
After the delegation change, to_terminal_ours will never be NULL.
I think this bug can be seen before the target delegation change by
enabling target debugging -- this would also cause to_terminal_ours to
be non-NULL.
The fix is to introduce a new target_supports_terminal_ours function,
that properly checks the target stack. This is not perhaps ideal, but
I think is a reasonable-enough approach, and in keeping with some
other existing code of the same form.
This patch also fixes a similar bug in target_supports_delete_record.
2014-07-18 Tom Tromey <tromey@redhat.com>
PR gdb/17130:
* utils.c (quit): Use target_supports_terminal_ours.
* target.h (target_supports_terminal_ours): Declare.
* target.c (target_supports_delete_record): Don't check
to_delete_record against NULL.
(target_supports_terminal_ours): New function.
This fixes the record "run" regression pointed out by Marc Khouzam:
https://sourceware.org/ml/gdb/2014-06/msg00096.html
The bug is that target_require_runnable must agree with the handling
of the "run" target, but currently it is out of sync. This patch
fixes the problem by changing target_require_runnable to also ignore
the record_stratum.
Built and regtested on x86-64 Fedora 20.
New test case included.
2014-07-14 Tom Tromey <tromey@redhat.com>
* target.c (target_require_runnable): Also check record_stratum.
Update comment.
2014-07-14 Tom Tromey <tromey@redhat.com>
* gdb.reverse/rerun-prec.c: New file.
* gdb.reverse/rerun-prec.exp: New file.
This changes to_info_record to use target delegation.
Also, target_info_record was unused, so this patch removes it.
2014-07-07 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
* target.c (target_info_record): Remove.
* record.c (info_record_command): Unconditionally call
to_info_record.
* target.h (struct target_ops) <to_info_record>: Use
TARGET_DEFAULT_IGNORE.
(target_info_record): Remove.
This converts to_get_thread_local_address to use
TARGET_DEFAULT_NORETURN. One possible oddity is that this changes the
text of the kind of exception thrown in some cases. This doesn't seem
to be a problem; in fact perhaps the final call to 'error' in
target_translate_tls_address should be changed to call
generic_tls_error.
2014-07-07 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_get_thread_local_address>: Use
TARGET_DEFAULT_NORETURN.
* target.c (generic_tls_error): New function.
(target_translate_tls_address): Don't search target stack.
* target-delegates.c: Rebuild.
* ppc-linux-tdep.c (ppc_linux_spe_context): Don't search target
stack.
* linux-thread-db.c (thread_db_get_thread_local_address):
Unconditionally call beneath target.
This makes the argument to the target_ops to_load method "const", and
fixes up the fallout. Tested by rebuilding all the affected files.
2014-06-26 Tom Tromey <tromey@redhat.com>
* defs.h (generic_load): Update.
* m32r-rom.c (m32r_load_gen): Make "filename" const.
* monitor.c (monitor_load): Make "args" const.
* remote-m32r-sdi.c (m32r_load): Make "args" const.
* remote-mips.c (mips_load_srec, pmon_load_fast): Make "args"
const.
(mips_load): Make "file" const.
* remote-sim.c (gdbsim_load): Make "args" const.
* remote.c (remote_load): Make "name" const.
* symfile.c (generic_load): Make "args" const.
* target-delegates.c: Rebuild.
* target.c (target_load): Make "arg" const.
(debug_to_load): Make "args" const.
* target.h (struct target_ops) <to_load>: Make parameter const.
(target_load): Update.
Add new target functions to_prepare_to_generate_core and
to_done_generating_core that are called before and after generating a core
file, respectively.
This allows targets to prepare for core file generation and to clean up
afterwards.
gdb/
* target.h (target_ops) <to_prepare_to_generate_core>
<to_done_generating_core>: New.
(target_prepare_to_generate_core, target_done_generating_core): New.
* target.c (target_prepare_to_generate_core)
(target_done_generating_core): New.
* target-delegates.c: Regenerate.
* gcore.c: (write_gcore_file): Rename to ...
(write_gcore_file_1): ...this.
(write_gcore_file): Call target_prepare_to_generate_core
and target_done_generating_core.
This makes a parameter of to_info_proc const and then fixes up some
fallout, including parameters in a couple of gdbarch methods.
I could not test the procfs.c change. I verified it by inspection.
If this causes an error here, it will be trivial to fix.
2014-06-16 Tom Tromey <tromey@redhat.com>
* target.h (struct target_ops) <to_info_proc>: Make parameter
const.
(target_info_proc): Update.
* target.c (target_info_proc): Make "args" const.
* procfs.c (procfs_info_proc): Update.
* linux-tdep.c (linux_info_proc): Update.
(linux_core_info_proc_mappings): Make "args" const.
(linux_core_info_proc): Update.
* gdbarch.sh (info_proc, core_info_proc): Make "args" const.
* gdbarch.c: Rebuild.
* gdbarch.h: Rebuild.
* corelow.c (core_info_proc): Update.
This converts to_thread_address_space to use TARGET_DEFAULT_FUNC.
This method was one of a handful not using the normal target
delegation approach. The only rationale here is consistency in the
target vector.
Built and regtested on x86-64 Fedora 20.
2014-06-04 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
* target.c (default_thread_address_space): New function.
(target_thread_address_space): Simplify.
* target.h (struct target_ops) <to_thread_address_space>: Add
TARGET_DEFAULT_FUNC.
This finally makes background execution commands possible by default.
However, in order to do that, there's one last thing we need to do --
we need to separate the MI and target notions of "async". Unlike the
CLI, where the user explicitly requests foreground vs background
execution in the execution command itself (c vs c&), MI chose to treat
"set target-async" specially -- setting it changes the default
behavior of execution commands.
So, we can't simply "set target-async" default to on, as that would
affect MI frontends. Instead we have to make the setting MI-specific,
and teach MI about sync commands on top of an async target.
Because the "target" word in "set target-async" ends up as a potential
source of confusion, the patch adds a "set mi-async" option, and makes
"set target-async" a deprecated alias.
Rather than make the targets always async, this patch introduces a new
"maint set target-async" option so that the GDB developer can control
whether the target is async. This makes it simpler to debug issues
arising only in the synchronous mode; important because sync mode
seems unlikely to go away.
Unlike in previous revisions, "set target-async" does not affect this
new maint parameter. The rationale for this is that then one can
easily run the test suite in the "maint set target-async off" mode and
have tests that enable mi-async fail just like they fail on
non-async-capable targets. This emulation is exactly the point of the
maint option.
I had asked Tom in a previous iteration to split the actual change of
the target async default to a separate patch, but it turns out that
that is quite awkward in this version of the patch, because with MI
async and target async decoupled (unlike in previous versions), if we
don't flip the default at the same time, then just "set target-async
on" alone never actually manages to do anything. It's best to not
have that transitory state in the tree.
Given "set target-async on" now only has effect for MI, the patch goes
through the testsuite removing it from non-MI tests. MI tests are
adjusted to use the new and less confusing "mi-async" spelling.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Mention "maint set target-async", "set mi-async", and that
background execution commands are now always available.
* target.h (target_async_permitted): Update comment.
* target.c (target_async_permitted, target_async_permitted_1):
Default to 1.
(set_target_async_command): Rename to ...
(maint_set_target_async_command): ... this.
(show_target_async_command): Rename to ...
(maint_show_target_async_command): ... this.
(_initialize_target): Adjust.
* infcmd.c (prepare_execution_command): Make extern.
* inferior.h (prepare_execution_command): Declare.
* infrun.c (set_observer_mode): Leave target async alone.
* mi/mi-interp.c (mi_interpreter_init): Install
mi_on_sync_execution_done as sync_execution_done observer.
(mi_on_sync_execution_done): New function.
(mi_execute_command_input_handler): Don't print the prompt if we
just started a synchronous command with an async target.
(mi_on_resume): Check sync_execution before printing prompt.
* mi/mi-main.h (mi_async_p): Declare.
* mi/mi-main.c: Include gdbcmd.h.
(mi_async_p): New function.
(mi_async, mi_async_1): New globals.
(set_mi_async_command, show_mi_async_command, mi_async): New
functions.
(exec_continue): Call prepare_execution_command.
(run_one_inferior, mi_cmd_exec_run, mi_cmd_list_target_features)
(mi_execute_async_cli_command): Use mi_async_p.
(_initialize_mi_main): Install "set mi-async". Make
"target-async" a deprecated alias.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
from example.
(Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
Mention that target-async is now deprecated.
(Maintenance Commands): Document maint set/show target-async.
2014-05-29 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* gdb.base/async-shell.exp: Don't enable target-async.
* gdb.base/async.exp
* gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
parameter. Adjust.
(top level): Don't test with "target-async".
* gdb.base/dprintf-non-stop.exp: Don't enable target-async.
* gdb.base/gdb-sigterm.exp: Don't test with "target-async".
* gdb.base/inferior-died.exp: Don't enable target-async.
* gdb.base/interrupt-noterm.exp: Likewise.
* gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
* gdb.mi/mi-nonstop-exit.exp: Likewise.
* gdb.mi/mi-nonstop.exp: Likewise.
* gdb.mi/mi-ns-stale-regcache.exp: Likewise.
* gdb.mi/mi-nsintrall.exp: Likewise.
* gdb.mi/mi-nsmoribund.exp: Likewise.
* gdb.mi/mi-nsthrexec.exp: Likewise.
* gdb.mi/mi-watch-nonstop.exp: Likewise.
* gdb.multi/watchpoint-multi.exp: Adjust comment.
* gdb.python/py-evsignal.exp: Don't enable target-async.
* gdb.python/py-evthreads.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.reverse/break-precsave.exp: Don't test with "target-async".
* gdb.server/solib-list.exp: Don't enable target-async.
* gdb.threads/thread-specific-bp.exp: Likewise.
* lib/mi-support.exp: Adjust to use mi-async.
If one sets a breakpoint with a condition that involves calling a
function in the inferior, and then the condition evaluates false, GDB
outputs one *running event for each time the program hits the
breakpoint. E.g.,
$ gdb return-false -i=mi
(gdb)
start
...
(gdb)
b 14 if return_false ()
&"b 14 if return_false ()\n"
~"Breakpoint 2 at 0x4004eb: file return-false.c, line 14.\n"
...
^done
(gdb)
c
&"c\n"
~"Continuing.\n"
^running
*running,thread-id=(...)
(gdb)
*running,thread-id=(...)
*running,thread-id=(...)
*running,thread-id=(...)
*running,thread-id=(...)
*running,thread-id=(...)
... repeat forever ...
An easy way a user can trip on this is with a dprintf with "set
dprintf-style call". In that case, a dprintf is just a breakpoint
that when hit GDB calls the printf function in the inferior, and then
resumes it, just like the case above.
If the breakpoint/dprintf is set in a loop, then these spurious events
can potentially slow down a frontend much, if it decides to refresh
its GUI whenever it sees this event (Eclipse is one such case).
When we run an infcall, we pretend we don't actually run the inferior.
This is already handled for the usual case of calling a function
directly from the CLI:
(gdb)
p return_false ()
&"p return_false ()\n"
~"$1 = 0"
~"\n"
^done
(gdb)
Note no *running, nor *stopped events. That's handled by:
static void
mi_on_resume (ptid_t ptid)
{
...
/* Suppress output while calling an inferior function. */
if (tp->control.in_infcall)
return;
and equivalent code on normal_stop.
However, in the cases of the PR, after finishing the infcall there's
one more resume, and mi_on_resume doesn't know that it should suppress
output then too, somehow.
The "running/stopped" state is a high level user/frontend state.
Internal stops are invisible to the frontend. If follows from that
that we should be setting the thread to running at a higher level
where we still know the set of threads the user _intends_ to resume.
Currently we mark a thread as running from within target_resume, a low
level target operation. As consequence, today, if we resume a
multi-threaded program while stopped at a breakpoint, we see this:
-exec-continue
^running
*running,thread-id="1"
(gdb)
*running,thread-id="all"
The first *running was GDB stepping over the breakpoint, and the
second is GDB finally resuming everything.
Between those two *running's, threads other than "1" still have their
state set to stopped. That's bogus -- in async mode, this opens a
tiny window between both resumes where the user might try to run
another execution command to threads other than thread 1, and very
much confuse GDB.
That is, the "step" below should fail the "step", complaining that the
thread is running:
(gdb) c -a &
(gdb) thread 2
(gdb) step
IOW, threads that GDB happens to not resume immediately (say, because
it needs to step over a breakpoint) shall still be marked as running.
Then, if we move marking threads as running to a higher layer,
decoupled from target_resume, plus skip marking threads as running
when running an infcall, the spurious *running events disappear,
because there will be no state transitions at all.
I think we might end up adding a new thread state -- THREAD_INFCALL or
some such, however since infcalls are always synchronous today, I
didn't find a need. There's no way to execute a CLI/MI command
directly from the prompt if some thread is running an infcall.
Tested on x86_64 Fedora 20.
gdb/
2014-05-29 Pedro Alves <palves@redhat.com>
PR PR15693
* infrun.c (resume): Determine how much to resume depending on
whether the caller wanted a step, not whether we can hardware step
the target. Mark all threads that we intend to run as running,
unless we're calling an inferior function.
(normal_stop): If the thread is running an infcall, don't finish
thread state.
* target.c (target_resume): Don't mark threads as running here.
gdb/testsuite/
2014-05-29 Pedro Alves <palves@redhat.com>
Hui Zhu <hui@codesourcery.com>
PR PR15693
* gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
* gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
* gdb.mi/mi-condbreak-call-thr-state.c: New file.
* gdb.mi/mi-condbreak-call-thr-state.exp: New file.
Move infrun.c declarations out of inferior.h to a new infrun.h file.
Tested by building on:
i686-w64-mingw32, enable-targets=all
x86_64-linux, enable-targets=all
i586-pc-msdosdjgpp
And also grepped the whole tree for each symbol moved to find where
infrun.h might be necessary.
gdb/
2014-05-22 Pedro Alves <palves@redhat.com>
* inferior.h (debug_infrun, debug_displaced, stop_on_solib_events)
(sync_execution, sched_multi, step_stop_if_no_debug, non_stop)
(disable_randomization, enum exec_direction_kind)
(execution_direction, stop_registers, start_remote)
(clear_proceed_status, proceed, resume, user_visible_resume_ptid)
(wait_for_inferior, normal_stop, get_last_target_status)
(prepare_for_detach, fetch_inferior_event, init_wait_for_inferior)
(insert_step_resume_breakpoint_at_sal)
(follow_inferior_reset_breakpoints, stepping_past_instruction_at)
(set_step_info, print_stop_event, signal_stop_state)
(signal_print_state, signal_pass_state, signal_stop_update)
(signal_print_update, signal_pass_update)
(update_signals_program_target, clear_exit_convenience_vars)
(displaced_step_dump_bytes, update_observer_mode)
(signal_catch_update, gdb_signal_from_command): Move
declarations ...
* infrun.h: ... to this new file.
* amd64-tdep.c: Include infrun.h.
* annotate.c: Include infrun.h.
* arch-utils.c: Include infrun.h.
* arm-linux-tdep.c: Include infrun.h.
* arm-tdep.c: Include infrun.h.
* break-catch-sig.c: Include infrun.h.
* breakpoint.c: Include infrun.h.
* common/agent.c: Include infrun.h instead of inferior.h.
* corelow.c: Include infrun.h.
* event-top.c: Include infrun.h.
* go32-nat.c: Include infrun.h.
* i386-tdep.c: Include infrun.h.
* inf-loop.c: Include infrun.h.
* infcall.c: Include infrun.h.
* infcmd.c: Include infrun.h.
* infrun.c: Include infrun.h.
* linux-fork.c: Include infrun.h.
* linux-nat.c: Include infrun.h.
* linux-thread-db.c: Include infrun.h.
* monitor.c: Include infrun.h.
* nto-tdep.c: Include infrun.h.
* procfs.c: Include infrun.h.
* record-btrace.c: Include infrun.h.
* record-full.c: Include infrun.h.
* remote-m32r-sdi.c: Include infrun.h.
* remote-mips.c: Include infrun.h.
* remote-notif.c: Include infrun.h.
* remote-sim.c: Include infrun.h.
* remote.c: Include infrun.h.
* reverse.c: Include infrun.h.
* rs6000-tdep.c: Include infrun.h.
* s390-linux-tdep.c: Include infrun.h.
* solib-irix.c: Include infrun.h.
* solib-osf.c: Include infrun.h.
* solib-svr4.c: Include infrun.h.
* target.c: Include infrun.h.
* top.c: Include infrun.h.
* windows-nat.c: Include infrun.h.
* mi/mi-interp.c: Include infrun.h.
* mi/mi-main.c: Include infrun.h.
* python/py-threadevent.c: Include infrun.h.
Sometimes it's useful to be able to disable the automatic connection
to the native target. E.g., sometimes GDB disconnects from the
extended-remote target I was debugging, without me noticing it, and
then I do "run". That starts the program locally, and only after a
little head scratch session do I figure out the program is running
locally instead of remotely as intended. Same thing with "attach",
"info os", etc.
With the patch, we now can have this instead:
(gdb) set auto-connect-native-target off
(gdb) target extended-remote :9999
...
*gdb disconnects*
(gdb) run
Don't know how to run. Try "help target".
To still be able to connect to the native target with
auto-connect-native-target set to off, I've made "target native" work
instead of erroring out as today.
Before:
(gdb) target native
Use the "run" command to start a native process.
After:
(gdb) target native
Done. Use the "run" command to start a process.
(gdb) maint print target-stack
The current target stack is:
- native (Native process)
- exec (Local exec file)
- None (None)
(gdb) run
Starting program: ./a.out
...
I've also wanted this for the testsuite, when running against the
native-extended-gdbserver.exp board (runs against gdbserver in
extended-remote mode). With a non-native-target board, it's always a
bug to launch a program with the native target. Turns out we still
have one such case this patch catches:
(gdb) break main
Breakpoint 1 at 0x4009e5: file ../../../src/gdb/testsuite/gdb.base/coremaker.c, line 138.
(gdb) run
Don't know how to run. Try "help target".
(gdb) FAIL: gdb.base/corefile.exp: run: with core
On the patch itself, probably the least obvious bit is the need to go
through all targets, and move the unpush_target call to after the
generic_mourn_inferior call instead of before. This is what
inf-ptrace.c does too, ever since multi-process support was added.
The reason inf-ptrace.c does things in that order is that in the
current multi-process/single-target model, we shouldn't unpush the
target if there are still other live inferiors being debugged. The
check for that is "have_inferiors ()" (a misnomer nowadays...), which
does:
have_inferiors (void)
{
for (inf = inferior_list; inf; inf = inf->next)
if (inf->pid != 0)
return 1;
It's generic_mourn_inferior that ends up clearing inf->pid, so we need
to call it before the have_inferiors check. To make all native
targets behave the same WRT to explicit "target native", I've added an
inf_child_maybe_unpush_target function that targets call instead of
calling unpush_target directly, and as that includes the
have_inferiors check, I needed to adjust the targets.
Tested on x86_64 Fedora 20, native, and also with the
extended-gdbserver board.
Confirmed a cross build of djgpp gdb still builds.
Smoke tested a cross build of Windows gdb under Wine.
Untested otherwise.
gdb/
2014-05-21 Pedro Alves <palves@redhat.com>
* inf-child.c (inf_child_ops, inf_child_explicitly_opened): New
globals.
(inf_child_open_target): New function.
(inf_child_open): Use inf_child_open_target to push the target
instead of erroring out.
(inf_child_disconnect, inf_child_close)
(inf_child_maybe_unpush_target): New functions.
(inf_child_target): Install inf_child_disconnect and
inf_child_close. Store a pointer to the returned object.
* inf-child.h (inf_child_open_target, inf_child_maybe_unpush): New
declarations.
* target.c (auto_connect_native_target): New global.
(show_default_run_target): New function.
(find_default_run_target): Return NULL if automatically connecting
to the native target is disabled.
(_initialize_target): Install set/show auto-connect-native-target.
* NEWS: Mention "set auto-connect-native-target", and "target
native".
* linux-nat.c (super_close): New global.
(linux_nat_close): Call super_close.
(linux_nat_add_target): Store a pointer to the base class's
to_close method.
* inf-ptrace.c (inf_ptrace_mourn_inferior, inf_ptrace_detach): Use
inf_child_maybe_unpush.
* inf-ttrace.c (inf_ttrace_him): Don't push the target if it is
already pushed.
(inf_ttrace_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
(inf_ttrace_attach): Don't push the target if it is already
pushed.
(inf_ttrace_detach): Use inf_child_maybe_unpush_target.
* darwin-nat.c (darwin_mourn_inferior): Only unpush the target
after mourning the inferior. Use inf_child_maybe_unpush_target.
(darwin_attach_pid): Don't push the target if it is already
pushed.
* gnu-nat.c (gnu_mourn_inferior): Only unpush the target after
mourning the inferior. Use inf_child_maybe_unpush_target.
(gnu_detach): Use inf_child_maybe_unpush_target.
* go32-nat.c (go32_create_inferior): Don't push the target if it
is already pushed.
(go32_mourn_inferior): Use inf_child_maybe_unpush_target.
* nto-procfs.c (procfs_is_nto_target): Adjust comment.
(procfs_open): Rename to ...
(procfs_open_1): ... this. Add target_ops parameter. Adjust
comments. Can target_preopen before changing node. Call
inf_child_open_target to push the target explicitly.
(procfs_attach): Don't push the target if it is already pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_create_inferior): Don't push the target if it is already
pushed.
(nto_native_ops): New global.
(procfs_open): Reimplement.
(procfs_native_open): New function.
(init_procfs_targets): Install procfs_native_open as to_open of
"target native". Store a pointer to the "native" target in
nto_native_ops.
* procfs.c (procfs_attach): Don't push the target if it is already
pushed.
(procfs_detach): Use inf_child_maybe_unpush_target.
(procfs_mourn_inferior): Only unpush the target after mourning the
inferior. Use inf_child_maybe_unpush_target.
(procfs_init_inferior): Don't push the target if it is already
pushed.
* windows-nat.c (do_initial_windows_stuff): Don't push the target
if it is already pushed.
(windows_detach): Use inf_child_maybe_unpush_target.
(windows_mourn_inferior): Only unpush the target after mourning
the inferior. Use inf_child_maybe_unpush_target.
gdb/doc/
2014-05-21 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Starting): Document "set/show
auto-connect-native-target".
(Target Commands): Document "target native".
gdb/testsuite/
2014-05-21 Pedro Alves <palves@redhat.com>
* boards/gdbserver-base.exp (GDBFLAGS): Set to "set
auto-connect-native-target off".
* gdb.base/auto-connect-native-target.c: New file.
* gdb.base/auto-connect-native-target.exp: New file.
I have posted:
TLS variables access for -static -lpthread executables
https://sourceware.org/ml/libc-help/2014-03/msg00024.html
and the GDB patch below has been confirmed as OK for current glibcs.
Further work should be done for newer glibcs:
Improve TLS variables glibc compatibility
https://sourceware.org/bugzilla/show_bug.cgi?id=16954
Still the patch below implements the feature in a fully functional way backward
compatible with current glibcs, it depends on the following glibc source line:
csu/libc-tls.c
main_map->l_tls_modid = 1;
gdb/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* linux-thread-db.c (struct thread_db_info): Add td_thr_tlsbase_p.
(try_thread_db_load_1): Initialize it.
(thread_db_get_thread_local_address): Call it if LM is zero.
* target.c (target_translate_tls_address): Remove LM_ADDR zero check.
* target.h (struct target_ops) (to_get_thread_local_address): Add
load_module_addr comment.
gdb/gdbserver/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdbserver/thread-db.c (struct thread_db): Add td_thr_tlsbase_p.
(thread_db_get_tls_address): Call it if LOAD_MODULE is zero.
(thread_db_load_search, try_thread_db_load_1): Initialize it.
gdb/testsuite/
2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix TLS access for -static -pthread.
* gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
<HAVE_TLS> (thread_function, main): Initialize it.
* gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
Add clean_restart.
<$have_tls != "">: Check TLSVAR.
Message-ID: <20140410115204.GB16411@host2.jankratochvil.net>
This does two things:
1. Adds a test.
Recently compare-sections got a new "-r" switch, but given no test
existed for compare-sections, the patch was allowed in with no
testsuite addition. This now adds a test for both compare-sections
and compare-sections -r.
2. Makes the compare-sections command work against all targets.
Currently, compare-sections only works with remote targets, and only
those that support the qCRC packet. The patch makes it so that if the
target doesn't support accelerating memory verification, then GDB
falls back to comparing memory itself. This is of course slower, but
it's better than nothing, IMO. While testing against extended-remote
GDBserver I noticed that we send the qCRC request to the target if
we're connected, but not yet running a program. That can't work of
course -- the patch fixes that. This all also goes in the direction
of bridging the local/remote parity gap.
I didn't decouple 1. from 2., because that would mean that the test
would need to handle the case of the target not supporting the
command.
Tested on x86_64 Fedora 17, native, remote GDBserver, and
extended-remote GDBserver. I also hack-disabled qCRC support to make
sure the fallback paths in remote.c work.
gdb/doc/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Memory) <compare-sections>: Generalize comments to
not be remote specific. Add cross reference to the qCRC packet.
(Separate Debug Files): Update cross reference to the qCRC packet.
(General Query Packets) <qCRC packet>: Add anchor.
gdb/
2014-05-20 Pedro Alves <palves@redhat.com>
* NEWS: Mention that compare-sections now works with all targets.
* remote.c (PACKET_qCRC): New enum value.
(remote_verify_memory): Don't send qCRC if the target has no
execution. Use packet_support/packet_ok. If the target doesn't
support the qCRC packet, fallback to a deep memory copy.
(compare_sections_command): Say "target image" instead of "remote
executable".
(_initialize_remote): Add PACKET_qCRC to the list of config
packets that have no associated command. Extend comment.
* target.c (simple_verify_memory, default_verify_memory): New
function.
* target.h (struct target_ops) <to_verify_memory>: Default to
default_verify_memory.
(simple_verify_memory): New declaration.
* target-delegates.c: Regenerate.
gdb/testsuite/
2014-05-20 Pedro Alves <palves@redhat.com>
* gdb.base/compare-sections.c: New file.
* gdb.base/compare-sections.exp: New file.
As a follow-up to
[PATCH 7/8] Adjust read_value_memory to use to_xfer_partial
https://sourceware.org/ml/gdb-patches/2014-02/msg00384.html
this patch moves traceframe_available_memory down to the target side.
After this patch, the gdb core code is cleaner, and code on handling
unavailable memory is moved to remote/tfile/ctf targets.
In details, this patch moves traceframe_available_memory code from
memory_xfer_partial_1 to remote target only, so remote target still
uses traceframe_info mechanism to check unavailable memory, and use
remote_ops to read them from read-only sections. We don't use
traceframe_info mechanism for tfile and ctf target, because it is
fast to iterate all traceframes from trace file, so the summary
information got from traceframe_info is not necessary.
This patch also moves two functions to remote.c from target.c,
because they are only used in remote.c. I'll clean them up in another
patch.
gdb:
2014-03-22 Yao Qi <yao@codesourcery.com>
* ctf.c (ctf_xfer_partial): Check the return value of
exec_read_partial_read_only, if it is not TARGET_XFER_OK,
return TARGET_XFER_UNAVAILABLE.
* tracefile-tfile.c (tfile_xfer_partial): Likewise.
* target.c (target_read_live_memory): Move it to remote.c.
(memory_xfer_live_readonly_partial): Likewise.
(memory_xfer_partial_1): Move some code to remote_read_bytes.
* remote.c (target_read_live_memory): Moved from target.c.
(memory_xfer_live_readonly_partial): Likewise.
(remote_read_bytes): New, factored out from
memory_xfer_partial_1.
A patch in the target cleanup series caused a regression when using
record with target-async. Version 4 of the patch is here:
https://sourceware.org/ml/gdb-patches/2014-03/msg00159.html
The immediate problem is that record supplies to_can_async_p and
to_is_async_p methods, but does not supply a to_async method. So,
when target-async is set, record claims to support async -- but if the
underlying target does not support async, then the to_async method
call will end up in that method's default implementation, namely
tcomplain.
This worked previously because the record target used to provide a
to_async method; one that (erroneously, only at push time) checked the
other members of the target stack, and then simply dropped to_async
calls in the "does not implement async" case.
My first thought was to simply drop tcomplain as the default for
to_async. This works, but Pedro pointed out that the only reason
record has to supply to_can_async_p and to_is_async_p is that these
default to using the find_default_run_target machinery -- and these
defaults are only needed by "run" and "attach".
So, a nicer solution presents itself: change run and attach to
explicitly call into the default run target when needed; and change
to_is_async_p and to_can_async_p to default to "return 0". This makes
the target stack simpler to use and lets us remove the method
implementations from record. This is also in harmony with other plans
for the target stack; namely trying to reduce the impact of
find_default_run_target. This approach makes it clear that
find_default_is_async_p is not needed -- it is asking whether a target
that may not even be pushed is actually async, which seems like a
nonsensical question.
While an improvement, this approach proved to introduce the same bug
when using the core target. Looking a bit deeper, the issue is that
code in "attach" and "run" may need to use either the current target
stack or the default run target -- but different calls into the target
API in those functions could wind up querying different targets.
This new patch makes the target to use more explicit in "run" and
"attach". Then these commands explicitly make the needed calls
against that target. This ensures that a single target is used for
all relevant operations. This lets us remove a couple find_default_*
functions from various targets, including the dummy target. I think
this is a decent understandability improvement.
One issue I see with this patch is that the new calls in "run" and
"attach" are not very much like the rest of the target API. I think
fundamentally this is due to bad factoring in the target API, which
may need to be fixed for multi-target. Tackling that seemed ambitious
for a regression fix.
While working on this I noticed that there don't seem to be any test
cases that involve both target-async and record, so this patch changes
break-precsave.exp to add some. It also changes corefile.exp to add
some target-async tests; these pass with current trunk and with this
patch applied, but fail with the v1 patch.
This patch differs from v4 in that it moves initialization of
to_can_async_p and to_supports_non_stop into inf-child, adds some
assertions to complete_target_initialization, and adds some comments
to target.h.
Built and regtested on x86-64 Fedora 20.
2014-03-12 Tom Tromey <tromey@redhat.com>
* inf-child.c (return_zero): New function.
(inf_child_target): Set to_can_async_p, to_supports_non_stop.
* aix-thread.c (aix_thread_inferior_created): New function.
(aix_thread_attach): Remove.
(init_aix_thread_ops): Don't set to_attach.
(_initialize_aix_thread): Register inferior_created observer.
* corelow.c (init_core_ops): Don't set to_attach or
to_create_inferior.
* exec.c (init_exec_ops): Don't set to_attach or
to_create_inferior.
* infcmd.c (run_command_1): Use find_run_target. Make direct
target calls.
(attach_command): Use find_attach_target. Make direct target
calls.
* record-btrace.c (init_record_btrace_ops): Don't set
to_create_inferior.
* record-full.c (record_full_can_async_p, record_full_is_async_p):
Remove.
(init_record_full_ops, init_record_full_core_ops): Update. Don't
set to_create_inferior.
* target.c (complete_target_initialization): Add assertion.
(target_create_inferior): Remove.
(find_default_attach, find_default_create_inferior): Remove.
(find_attach_target, find_run_target): New functions.
(find_default_is_async_p, find_default_can_async_p)
(target_supports_non_stop, target_attach): Remove.
(init_dummy_target): Don't set to_create_inferior or
to_supports_non_stop.
* target.h (struct target_ops) <to_attach>: Add comment. Remove
TARGET_DEFAULT_FUNC.
<to_create_inferior>: Add comment.
<to_can_async_p, to_is_async_p, to_supports_non_stop>: Use
TARGET_DEFAULT_RETURN.
<to_can_async_p, to_supports_non_stop, to_can_run>: Add comments.
(find_attach_target, find_run_target): Declare.
(target_create_inferior): Remove.
(target_has_execution_1): Update comment.
(target_supports_non_stop): Remove.
* target-delegates.c: Rebuild.
2014-03-12 Tom Tromey <tromey@redhat.com>
* gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
New procs. Add target-async tests.
* gdb.reverse/break-precsave.exp (precsave_tests): New proc.
Add target-async tests.
In non-stop mode, or rather, breakpoints always-inserted mode, the
code cache can easily end up with stale breakpoint instructions:
All it takes is filling a cache line when breakpoints already exist in
that memory region, and then delete the breakpoint.
Vis. (from the new test):
(gdb) set breakpoint always-inserted on
(gdb) b 23
Breakpoint 2 at 0x400540: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 23.
(gdb) b 24
Breakpoint 3 at 0x400547: file ../../../src/gdb/testsuite/gdb.base/breakpoint-shadow.c, line 24.
disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
So far so good. Now flush the code cache:
(gdb) set code-cache off
(gdb) set code-cache on
Requesting a disassembly works as expected, breakpoint shadowing is
applied:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
However, now delete the breakpoints:
(gdb) delete
Delete all breakpoints? (y or n) y
And disassembly shows the old breakpoint instructions:
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: int3
0x0000000000400541 <+5>: rex.RB cld
0x0000000000400543 <+7>: add %eax,(%rax)
0x0000000000400545 <+9>: add %al,(%rax)
0x0000000000400547 <+11>: int3
0x0000000000400548 <+12>: rex.RB cld
0x000000000040054a <+14>: add (%rax),%al
0x000000000040054c <+16>: add %al,(%rax)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
Those breakpoint instructions are no longer installed in target memory
they're stale in the code cache. Easily confirmed by just disabling
the code cache:
(gdb) set code-cache off
(gdb) disass main
Dump of assembler code for function main:
0x000000000040053c <+0>: push %rbp
0x000000000040053d <+1>: mov %rsp,%rbp
=> 0x0000000000400540 <+4>: movl $0x1,-0x4(%rbp)
0x0000000000400547 <+11>: movl $0x2,-0x4(%rbp)
0x000000000040054e <+18>: mov $0x0,%eax
0x0000000000400553 <+23>: pop %rbp
0x0000000000400554 <+24>: retq
End of assembler dump.
I stumbled upon this when writing a patch to infrun.c, that made
handle_inferior_event & co fill in the cache before breakpoints were
removed from the target. Recall that wait_for_inferior flushes the
dcache for every event. So in that case, always-inserted mode was not
necessary to trigger this. It's just a convenient way to expose the
issue.
The dcache works at the raw memory level. We need to update it
whenever memory is written, no matter what kind of target memory
object was originally passed down by the caller. The issue is that
the dcache update code isn't reached when a caller explicitly writes
raw memory. Breakpoint insertion/removal is one such case --
mem-break.c uses target_write_read_memory/target_write_raw_memory.
The fix is to move the dcache update code from memory_xfer_partial_1
to raw_memory_xfer_partial so that it's always reachable.
When we do that, we can actually simplify a series of things.
memory_xfer_partial_1 no longer needs to handle writes for any kind of
memory object, and therefore dcache_xfer_memory no longer needs to
handle writes either. So the latter (dcache_xfer_memory) and its
callees can be simplified to only care about reads. While we're
touching dcache_xfer_memory's prototype, might as well rename it to
reflect that fact that it only handles reads, and make it follow the
new target_xfer_status/xfered_len style. This made me notice that
dcache_xfer_memory loses the real error status if a memory read fails:
we could have failed to read due to TARGET_XFER_E_UNAVAILABLE, for
instance, but we always return TARGET_XFER_E_IO, hence the FIXME note.
I felt that fixing that fell out of the scope of this patch.
Currently dcache_xfer_memory handles the case of a write failing. The
whole cache line is invalidated when that happens. However,
dcache_update, the sole mechanism for handling writes that will remain
after the patch, does not presently handle that scenario. That's a
bug. The patch makes it handle that, by passing down the
target_xfer_status status from the caller, so that it can better
decide what to do itself. While I was changing the function's
prototype, I constified the myaddr parameter, getting rid of the need
for the cast as seen in its existing caller.
Tested on x86_64 Fedora 17, native and gdbserver.
gdb/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* dcache.c (dcache_poke_byte): Constify ptr parameter. Return
void. Update comment.
(dcache_xfer_memory): Delete.
(dcache_read_memory_partial): New, based on the read bits of
dcache_xfer_memory.
(dcache_update): Add status parameter. Use ULONGEST for len, and
adjust. Discard cache lines if the reason for the update was
error.
* dcache.h (dcache_xfer_memory): Delete declaration.
(dcache_read_memory_partial): New declaration.
(dcache_update): Update prototype.
* target.c (raw_memory_xfer_partial): Update the dcache here.
(memory_xfer_partial_1): Don't handle dcache writes here.
gdb/testsuite/
2014-03-05 Pedro Alves <palves@redhat.com>
PR gdb/16575
* gdb.base/breakpoint-shadow.exp (compare_disassembly): New
procedure.
(top level): Adjust to use it. Add tests that exercise breakpoint
interaction with the code-cache.
As no target uses it anymore, it can finally go away.
After removing the deprecated_xfer_memory handling from
default_xfer_partial, we can delete the latter, because the only thing
it does is delegate to the target beneath unconditionally, which is
what the delegator installed by target-delegates.c will do for us if
no to_xfer_partial method is installed.
This was the last user of de_fault, so that goes away too.
Tested on x86_64 Fedora 17.
gdb/
2014-02-26 Pedro Alves <palves@redhat.com>
* target.c (complete_target_initialization): Don't install
default_xfer_partial as to_xfer_partial hook.
(nomemory): Delete.
(update_current_target): Don't INHERIT nor de_fault
deprecated_xfer_memory. Delete de_fault macro.
(default_xfer_partial, deprecated_debug_xfer_memory): Delete.
(setup_target_debug): Don't install a deprecated_xfer_memory hook.
* target.h (struct target_ops) <deprecated_xfer_memory>: Delete
field.
This removes target_ignore, which isn't used any more.
2014-02-25 Tom Tromey <tromey@redhat.com>
* target.h (target_ignore): Don't declare.
* target.c (target_ignore): Remove.
Nowadays, TARGET_XFER_E_UNAVAILABLE isn't regarded as an error in
to_xfer_partial interface, so _E_ looks odd. This patch is to
replace TARGET_XFER_E_UNAVAILABLE with TARGET_XFER_UNAVAILABLE,
and change its value from -2 to 2. Since there is no comparison
on the value of 'enum target_xfer_status', so it should be safe.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (enum target_xfer_status)
<TARGET_XFER_E_UNAVAILABLE>: Rename it to ...
<TARGET_XFER_UNAVAILABLE>: ... it with setting value 2
explicitly. New.
* corefile.c (memory_error_message): User updated.
* exec.c (section_table_read_available_memory): Likewise.
* record-btrace.c (record_btrace_xfer_partial): Likewise.
* target.c (target_xfer_status_to_string): Likewise.
(raw_memory_xfer_partial): Likewise.
(memory_xfer_partial_1, target_xfer_partial): Likewise.
* valops.c (read_value_memory): Likewise.
* exec.h: Update comments.
This patch tweaks target_xfer_status_to_string on comments and argument
name.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.c (target_xfer_status_to_string): Rename argument err
to status.
* target.h (target_xfer_status_to_string): Update declaration.
Replace target_xfer_error_to_string with
target_xfer_status_to_string in comment.
This patch removes macro TARGET_XFER_STATUS_ERROR_P, as Pedro pointed
out during patches review that TARGET_XFER_STATUS_ERROR_P tends to
be unnecessary.
gdb:
2014-02-24 Yao Qi <yao@codesourcery.com>
* target.h (TARGET_XFER_STATUS_ERROR_P): Remove.
* corefile.c (read_memory): Adjusted.
* target.c (target_write_with_progress): Adjusted.
The patch "return target_xfer_status in to_xfer_partial" caused a
regression in various s390(x) test cases, because memory_xfer_partial
filled only the first byte of the read buffer from a breakpoint shadow:
https://sourceware.org/ml/gdb-patches/2014-01/msg01071.html
This patch fixes the regression.
This converts to_get_unwinder and to_get_tailcall_unwinder to methods
and arranges for them to use the new delegation scheme.
This just lets us avoid having a differing style (neither new-style
nor INHERIT) of delegation in the tree.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (target_get_unwinder): Rewrite.
(target_get_tailcall_unwinder): Rewrite.
* record-btrace.c (record_btrace_to_get_unwinder): New function.
(record_btrace_to_get_tailcall_unwinder): New function.
(init_record_btrace_ops): Update.
* target.h (struct target_ops) <to_get_unwinder,
to_get_tailcall_unwinder>: Now function pointers. Use
TARGET_DEFAULT_RETURN.
This converts to_decr_pc_after_break to the new style of delegation,
removing forward_target_decr_pc_after_break.
2014-02-19 Tom Tromey <tromey@redhat.com>
* record-btrace.c (record_btrace_decr_pc_after_break): Delegate
directly.
* target-delegates.c: Rebuild.
* target.h (struct target_ops) <to_decr_pc_after_break>: Use
TARGET_DEFAULT_FUNC.
* target.c (default_target_decr_pc_after_break): Rename from
forward_target_decr_pc_after_break. Simplify.
(target_decr_pc_after_break): Rely on delegation.
This removes a few unnecessary calls to INHERIT and de_fault:
* to_doc is only used when a target is registered
* to_magic is only used when a target is pushed and not useful for
current_target.
* to_open and to_close are only ever called using a specific
target_ops object; there is no need to de_fault them.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (update_current_target): Do not INHERIT to_doc or
to_magic. Do not de_fault to_open or to_close.
This cleans up target.c to avoid function casts.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (complete_target_initialization): Remove casts. Use
return_zero_has_execution.
(return_zero): Add "ignore" argument.
(return_zero_has_execution): New function.
(init_dummy_target): Remove casts. Use
return_zero_has_execution.
During the conversion I kept all the "do not inherit" comments in
update_current_target. However, now they are not needed. This patch
updates the comments for INHERIT and de_fault, and removes the
somewhat odd INHERIT of to_stratum.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target.c (update_current_target): Update comments. Do not
INHERIT to_stratum.
This switches to_read_description to the "new normal" delegation
scheme. This one was a bit trickier than the other changes due to the
way that target_read_description handled delegation. I examined all
the target implementations of to_read_description and changed the ones
returning NULL to instead delegate.
2014-02-19 Tom Tromey <tromey@redhat.com>
* arm-linux-nat.c (arm_linux_read_description): Delegate when
needed.
* corelow.c (core_read_description): Delegate when needed.
* remote.c (remote_read_description): Delegate when needed.
* target-delegates.c: Rebuild.
* target.c (target_read_description): Rewrite.
* target.h (struct target_ops) <to_read_description>: Update
comment. Use TARGET_DEFAULT_RETURN.
Note that this patch reformats the
to_static_tracepoint_markers_by_strid field declaration in struct
target_ops. This was needed because make-target-delegates requires
the opening paren for the parameters to be on the same line as the
method name, and I didn't see an easy way to fix this.
2014-02-19 Tom Tromey <tromey@redhat.com>
* target-delegates.c: Rebuild.
* target.c (update_current_target): Don't inherit or default
to_static_tracepoint_markers_by_strid.
* target.h (struct target_ops)
<to_static_tracepoint_markers_by_strid>: Use
TARGET_DEFAULT_NORETURN.
