This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
This patch addresses the following
1) Adding ARMv8.5-A in select_arm_features.
2) Updating the feature macro so that the new ARM_EXT2_* features for
Armv8.5-A are moved to ARM_AEXT2_V8_5A.
*** opcodes/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
*** include/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and
ARM_EXT2_SB to ...
(ARM_AEXT2_V8_5A): Here.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New.
(AARCH64_FEATURE_ID_PFR2): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test registers
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys)
This patch adds the DC CVADP instruction. Since this has a separate
identification mechanism a new feature bit is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CVADP): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test instruction.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the Execution and Data Prediction Restriction
instructions (that is, cfprctx, dvprxtc, cpprctx). These are all
aliases to MCR and are disassembled as such.
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence adding a new +predres for older versions of the
architecture.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_PREDRES): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_predres): New.
(insns): Add new cfprctx, dvprctx and cpprctx instructions.
(arm_extensions): Add "predres".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/predres-bad.d: New test.
* testsuite/gas/arm/predres-bad.l: New test.
* testsuite/gas/arm/predres.s: New test.
* testsuite/gas/arm/predres1.d: New test.
* testsuite/gas/arm/predres2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the instruction SB. This instruction is
retrospectively made optional for all versions of the architecture
from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a
new "+sb" for older archtectures.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_SB): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default.
*** opcodes/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_sb): New.
(insns): Add new sb instruction.
(arm_extensions): Add "sb".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/sb-bad.d: New test.
* testsuite/gas/arm/sb-bad.l: New test.
* testsuite/gas/arm/sb-thumb1.d: New test.
* testsuite/gas/arm/sb-thumb2.d: New test.
* testsuite/gas/arm/sb.s: New test.
* testsuite/gas/arm/sb1.d: New test.
* testsuite/gas/arm/sb2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_archs): New entry for armv8.5-a.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Add documentation for the same.
* testsuite/gas/arm/attr-march-armv8_5-a.d: New.
*** include/ChnageLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_V8_5A): New.
(ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
The current verifiers only take an instruction description and encoded value as
arguments. This was enough when the verifiers only needed to do simple checking
but it's insufficient for the purposes of validating instruction sequences.
This patch adds the required arguments and also a flag to allow a verifier to
distinguish between whether it's being run during encoding or decoding. It also
allows for errors and warnings to be returned by a verifier instead of a simple
pass/fail.
include/
* opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take
more arguments.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
Previously the ERR_ values were defined as different constants, to make this a
bit more type safe and so they can be more easily re-used I'm changing them into
an actual enum and updating any usages.
include/
* opcode/aarch64.h (enum err_type): New.
(aarch64_decode_insn): Use it.
opcodes/
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
The RISC-V memory model has been ratified, and it includes an additional
fence: "fence.tso". This pseudo instruction extends one of the
previously reserved full fence patterns to be less restrictive, and
therefor will execute correctly on all existing microarchitectures.
Thus there is no reason to allow this instruction to be disabled (or
unconverted to a full fence), so it's just unconditionally allowed.
I've added a test case for GAS to check that "fence.tso" correctly
assembles on rv32i-based targets. I checked to see that "fence.tso"
appears in "gas.log", but that's the only testing I've done.
gas/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* testsuite/gas/riscv/fence-tso.d: New file.
* testsuite/gas/riscv/fence-tso.s: Likewise.
include/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* opcode/riscv-opc.h (MATCH_FENCE_TSO): New define.
(MASK_FENCE_TSO): Likewise.
opcodes/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
opcodes/
* s12z.h: Delete.
* s12z-dis.c: Adjust path of included file.
include/
* opcode/s12z.h: New file.
gas/
* config/tc-s12z.c: Adjust path of included file.
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
Among the macros to manipulate an arm_feature_set structure is the
ARM_FEATURE_COPY which copy the value of a feature set into another.
This can be achieved with a simple assignement which most of the
existing code does. This patch removes the last 2 uses of that macro and
remove the macro altogether.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
include/
* opcode/arm.h (ARM_FEATURE_COPY): Remove macro definition.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
opcodes/
* arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY
macro by assignements.
The `M' and `m' MIPS16 operand codes are functionally the same, denoting
a 7-bit register list that is encoded the same way for both SAVE and
RESTORE. Use `m' for both instructions then, making `M' available for a
different use.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'M'>: Remove case.
(mips16_opcodes): Replace `M' with `m' for "restore".
include/
* opcode/mips.h: Remove `M' operand code.
gas/
* testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval.
* testsuite/gas/riscv/priv-reg.d: Likewise.
include/
* opcode/riscv-opc.h (CSR_SBADADDR): Rename to CSR_STVAL. Rename
DECLARE_CSR entry. Add alias to map sbadaddr to CSR_STVAL.
(CSR_MBADADDR): Rename to CSR_MTVAL. Rename DECLARE_CSR entry.
Add alias to map mbadaddr to CSR_MTVAL.
Dot products deviate from the normal disassembly rules for lane indexed
instruction. Their canonical representation is in the form of:
v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote
that these instructions select 4x 1 byte elements instead of a single 1 byte
element.
Previously we were disassembling them following the normal rules, this patch
corrects the disassembly.
gas/
PR gas/22559
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B.
* gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly.
include/
PR gas/22559
* aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B.
opcodes/
PR gas/22559
* aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
* aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
Previously parse_vector_type_for_operand was changed to allow the use of 4b
register size for indexed lane instructions. However this had the unintended
side effect of also allowing 4b for normal vector registers.
Because this support was only partial the rest of the tool silently treated
4b as 8b and continued. This patch adds full support for 4b so it can be
properly distinguished from 8b and the correct errors are generated.
With this patch you still can't encode any instruction which actually requires
v<num>.4b but such instructions don't exist so to prevent needing a workaround
in get_vreg_qualifier_from_value this was just omitted.
gas/
PR gas/22529
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_V_4B.
* gas/testsuite/gas/aarch64/pr22529.s: New.
* gas/testsuite/gas/aarch64/pr22529.d: New.
* gas/testsuite/gas/aarch64/pr22529.l: New.
include/
PR gas/22529
* opcode/aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_4B.
opcodes/
PR gas/22529
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a
into a new flag order to distinguish them from the rest of the already existing optional
FP16 instructions in Armv8.2-a.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on
Armv8.4-a.
gas/
* config/tc-aarch64.c (fp16fml): New.
* doc/c-aarch64.texi (fp16fml): New.
* testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml.
* testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml.
include/
* opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New.
(AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default.
opcodes/
* aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML
and AARCH64_FEATURE_F16.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory
from Armv8.4-a.
gas/
* config/tc-arm.c (arm_ext_fp16_fml, fp16fml): New.
(do_neon_fmac_maybe_scalar_long): Use arm_ext_fp16_fml.
* doc/c-arm.texi (fp16, fp16fml): New.
* testsuite/gas/arm/armv8_2-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_3-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d (fp16): Make fp16fml.
include/
* opcode/arm.h: (ARM_EXT2_FP16_FML): New.
(ARM_AEXT2_V8_4A): Add ARM_EXT2_FP16_FML.
The new options are:
+aes: Enables the AES instructions of Armv8-a,
enabled by default with +crypto.
+sha2: Enables the SHA1 and SHA2 instructions of Armv8-a,
enabled by default with +crypto.
These options have been turned on by default when +crypto
is used, as such no breakage is expected.
The reason for the split is because with the introduction of Armv8.4-a
the implementation of AES has explicitly been made independent of the
implementation of the other crypto extensions. Backporting the split does
not break any of the previous requirements and so is safe to do.
gas * config/tc-aarch64.c
(aarch64_features): Include AES and SHA2 in CRYPTO.
Add SHA2 and AES.
include * opcode/aarch64.h:
(AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New.
opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2.
(aarch64_feature_sha2, aarch64_feature_aes): New.
(SHA2, AES): New.
(AES_INSN, SHA2_INSN): New.
(pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS.
(sha1h, sha1su1, sha256su0, sha1c, sha1p,
sha1m, sha1su0, sha256h, sha256h2, sha256su1):
Change to SHA2_INS.
gas * config/tc-arm.c (arm_extensions):
(arm_archs): New entry for "armv8.4-a".
Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8.
(arm_ext_v8_2): New variable.
(enum arm_reg_type): New enumeration REG_TYPE_NSD.
(reg_expected_msgs): New entry for REG_TYPE_NSD.
(parse_typed_reg_or_scalar): Handle REG_TYPE_NSD.
(parse_scalar): Support REG_TYPE_VFS.
(enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC.
(parse_operands): Handle OP_RNSD and OP_RNSD_RNSC.
(NEON_SHAPE_DEF): New entries for DHH and DHS.
(neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding
for new FP16 instructions in ARMv8.2-A.
(do_neon_fmac_maybe_scalar_long): New function to encode new FP16
instructions in ARMv8.2-A.
(do_neon_vfmal): Wrapper function for vfmal.
(do_neon_vfmsl): Wrapper function for vfmsl.
(insns): New entries for vfmal and vfmsl.
* doc/c-arm.texi (-march): Document "armv8.4-a".
* testsuite/gas/arm/dotprod-mandatory.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16.d: New test.
* testsuite/gas/arm/armv8_3-a-fp16.d: New test.
* testsuite/gas/arm/armv8_4-a-fp16.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file.
opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new
FP16 instructions, including vfmal.f16 and vfmsl.f16.
include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature.
(ARM_EXT2_V8_4A): New macro.
(ARM_AEXT2_V8_4A): Likewise.
(ARM_ARCH_V8_4A): Likewise.
The RISC-V privileged ISA changed the name of sptbr (Supervisor Page
Table Base Register) to satp (Supervisor Address Translation and
Protection) to reflect the fact it could be used for more than just
paging. This patch adds an alias, as they're the same register.
include/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* opcode/riscv-opc.h (sptbr): Rename to satp.
(CSR_SPTBR): Rename to CSR_SATP.
(sptbr): Alias to CSR_SATP.
gas/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* testsuite/gas/riscv/satp.d: New test.
testsuite/gas/riscv/satp.s: Likewise.
testsuite/gas/riscv/riscv.exp: Likewise.
config/tc-riscv.c (md_begin): Handle CSR aliases.
gas * config/tc-arm.c (arm_cpus):
Change FPU_ARCH_CRYPTO_NEON_VFP_ARMV8
into FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD.
include * opcode/arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD):
New macro.
The FP16 feature is optional in ARMv8.2, so it is wrong to add it to
the default AARCH64_ARCH_V8_2 feature flags. This patch makes the
behaviour consistent with that of gcc, which also does not assume FP16
for ARMv8.2.
include/
* opcode/aarch64.h (AARCH64_ARCH_V8_2): Drop
AARCH64_FEATURE_F16.
This matches the ISA specification. This also adds two tests: one to
make sure the assembler rejects invalid 'c.lui's, and one to make sure
we only relax valid 'c.lui's.
bfd/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui
when rd is x0.
include/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the
immediate 0.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-lui-fail.d: New testcase.
gas/testsuite/gas/riscv/c-lui-fail.l: Likewise.
gas/testsuite/gas/riscv/c-lui-fail.s: Likewise.
gas/testsuite/gas/riscv/riscv.exp: Likewise.
ld/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* ld/testsuite/ld-riscv-elf/c-lui.d: New testcase.
ld/testsuite/ld-riscv-elf/c-lui.s: Likewise.
ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
PR gas/21683
include * opcode/avr.h (AVR_INSN): Add one for __gcc_isr.
gas * doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it.
(AVR Pseudo Instructions): New node.
* config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook.
(md_undefined_symbol): Define to avr_undefined_symbol.
(avr_pre_output_hook, avr_undefined_symbol): New protos.
* config/tc-avr.c (struc-symbol.h): Include it.
(ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums.
(avr_isr, avr_gccisr_opcode)
(avr_no_sreg_hash, avr_no_sreg): New static variables.
(avr_opt_s) <have_gccisr>: Add field.
(avr_opt): Add initializer for have_gccisr.
(enum options) <OPTION_HAVE_GCCISR>: Add enum.
(md_longopts) <"mgcc-isr">: Add entry.
(md_show_usage): Document -mgcc-isr.
(md_parse_option) [OPTION_HAVE_GCCISR]: Handle it.
(md_undefined_symbol): Remove.
(avr_undefined_symbol, avr_pre_output_hook): New fuctions.
(md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them.
(avr_operand) <pregno>: Add argument and set *pregno if function
is called for a register constraint.
[N]: Handle constraint.
(avr_operands) <avr_operand>: Pass 5th parameter to calls.
[avr_opt.have_gccisr]: Call avr_update_gccisr. Call
avr_gccisr_operands instead of avr_operands.
(avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag)
(avr_gccisr_operands, avr_check_gccisr_done): New static functions.
* testsuite/gas/avr/gccisr-01.d: New test.
* testsuite/gas/avr/gccisr-01.s: New test.
* testsuite/gas/avr/gccisr-02.d: New test.
* testsuite/gas/avr/gccisr-02.s: New test.
* testsuite/gas/avr/gccisr-03.d: New test.
* testsuite/gas/avr/gccisr-03.s: New test.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to remove special casing for ARMv6S-M
autodetection.
=== Motivation ===
Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor
architectures with extra checks in the handler function (do_t_swi) to
give an error message when ARMv6-M is targeted and some more special
casing in aeabi_set_public_attributes. This was made to exclude these
mnemonics for ARMv6-M unless the OS extension is in use.
However this logic is superfluous: there is already code to check
whether an instruction is available based on the feature bit it is part
of and whether the targeted architecture has that feature bit. This
patch aims at removing that unneeded complexity.
=== Patch description ===
The OS extension is already limited to the ARMv6-M architecture so all
this patch does is redefined availability of the ARM_EXT_OS feature bit
to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any
change either because it already includes ARM_EXT_OS.
The patch also make sure that the error message that was given by
do_t_swi when SWI/SVC is unavailable is still the same by detecting the
situation in md_assemble.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_v6m): Delete.
(arm_ext_v7m): Delete.
(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
profile.
(arm_arch_v6m_only): Delete.
(do_t_swi): Remove special case for ARMv6S-M.
(md_assemble): Display error message previously in do_t_swi when
SVC is not available.
(insns): Guard swi and svc by arm_ext_os for Thumb mode.
(aeabi_set_public_attributes): Remove special case for ARMv6S-M.
include/
* opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set.
(ARM_AEXT_V4T): Likewise.
(ARM_AEXT_V5TxM): Likewise.
(ARM_AEXT_V5T): Likewise.
(ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to rework the Tag_CPU_arch build attribute
value selection to (i) match architecture or CPU if specified by user
without any need for hack and (ii) match an architecture with all the
features used if in autodetection mode or return an error.
=== Motivation ===
Currently, Tag_CPU_arch build attribute value selection assumes that an
architecture is always a superset of architectures released earlier. As
such, the logic is to browse architectures in chronological order of
release and selecting the Tag_CPU_arch value of the last one to
contribute a feature used[1]/requested[2] not contributed by earlier
architectures.
[1] in case of autodetection mode
[2] otherwise, ie. in case of -mcpu/-march or associated directives
This logic fails the two objectives mentionned in the Context section.
First, due to the assumption it does an architecture can be selected
while not having all the features used/requested which fails the second
objective. Second, not doing an exact match when an architecture or CPU
is selected by the user means the wrong value is chosen when a later
architecture provides a subset of the feature bits of an earlier
architecture. This is the case for the implementation of ARMv8-R (see
later patch).
An added benefit of this patch is that it is possible to easily generate
more consistent build attribute by setting the feature bits from the
architecture matched in aeabi_set_public_attributes in autodetection
mode. This is better done as a separate patch because lots of testcase'
expected results must then be updated accordingly.
=== Patch description ===
The patch changes the main logic for Tag_CPU_arch and
Tag_CPU_arch_profile
values selection to:
- look for an exact match in case an architecture or CPU was specified
on the command line or in a directive
- select the first released architecture that provides a superset of the
feature used in the autodetection case
- select the most featureful architecture in case of -march=all
The array cpu_arch_ver is updated to include all architectures in order
to make the first point work.
Note that when looking for an exact match, the architecture with
selected extension is tried first and then only the architecture. This
is because some architectures are exactly equivalent to an earlier
architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS
extension) and ARMv6KZ (ARMv6K + security extension) are two such
examples.
Other adjustments are also necessary in aeabi_set_public_attributes to
make this change work.
1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the
absence of feature bit used/requested to decide whether to give the
default value for empty files (see EABI attribute defaults test). It was
previously checking that arch == 0 which would only happen if no feature
bit could be matched by any architecture, ie there is no feature bit to
match.
2) A fallback to a superset match must exist when no_cpu_selected ()
returns true. This is because aeabi_set_public_attributes is called
again after relaxation and at this point selected_cpu is set from the
previous execution of that function. There is therefore no way to check
whether the user specified an architecture or CPU.
3) Tag_CPU_arch lines are removed from expected output when the
detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch
value for pre-ARMv4 architectures and default value for an absent entry
is 0.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
(cpu_arch_ver): Add all architectures and sort by release date.
(have_ext_for_needed_feat_p): New.
(get_aeabi_cpu_arch_from_fset): New.
(aeabi_set_public_attributes): Call above function to determine
Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use
and Tag_THUMB_ISA_use selection logic to check absence of feature bit
accordingly.
* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
attribute value.
* testsuite/gas/arm/attr-march-armv2.d: Likewise.
* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* testsuite/gas/arm/attr-march-armv3.d: Likewise.
* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* testsuite/gas/arm/pr12198-2.d: Likewise.
include/
* opcode/arm.h (FPU_ANY): New macro.
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
The per operand optional flag hasn't been used for quite some time.
Cleanup some remains.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Remove S390_OPERAND_OPTIONAL.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Remove code dealing with
S390_OPERAND_OPTIONAL.
It is required to parse instructions like ldb.x.a.di.
include/
2017-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (MAX_INSN_FLGS): Update to 4.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
This adds support of new instructions to the S/390 specific parts.
The important feature of the new instruction set is the support of
single and extended precision floating point vector operations.
Note: arch12 is NOT the official name of the new CPU. It just
continues the series of archXX options supported as alternate names.
The archXX terminology refers to the edition number of the Principle
of Operations manual. The official CPU name will be added later while
keeping support of the arch12 for backwards compatibility.
No testsuite regressions.
Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as
facility.
* s390-opc.c: Add new operand description macros, new instruction
types, instruction masks, and new .insn instruction types.
* s390-opc.txt: Add new arch12 instructions.
include/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): New value
S390_OPCODE_ARCH12.
(S390_INSTR_FLAG_VX2): New macro definition.
gas/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch12.
* doc/as.texinfo: Document arch12 as cpu type.
* doc/c-s390.texi: Likewise.
* testsuite/gas/s390/s390.exp: Run arch12 specific tests.
* testsuite/gas/s390/zarch-arch12.d: New test.
* testsuite/gas/s390/zarch-arch12.s: New test.
* testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the
output patterns.
With this change an architecture level bump due to assembly ASIs will show
up as a warning/error depending on options passed to gas.
Tested with sparc64-linux-gnu, and it does not introduce any regressions.
gas/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* config/tc-sparc.c (parse_sparc_asi): New encode SPARC ASIs.
opcodes/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* include/opcode/sparc.h (sparc_asi): New sparc_asi struct.
* opcodes/sparc-opc.c (asi_table): Updated asi_table and encoding/
decoding of SPARC ASIs.
This stops powerpc gas blithely accepting such nonsense as
"addi %f4,%cr3,%r31".
PR 21118
gas/
* NEWS: Mention powerpc register checks.
* config/tc-ppc.c (struct pd_reg): Make value a short. Add flags.
(pre_defined_registers): Delete fpscr and pmr entries. Set
register type in flags.
(cr_names): Set type in flags.
(reg_name_search): Return pointer to struct pd_reg rather than value.
(register_name): Adjust to suit. Set X_md from flags.
(ppc_parse_name): Likewise.
(ppc_optimize_expr): New function.
(md_assemble): Verify expresion reg flags match operand.
* config/tc-ppc.h (md_optimize_expr): Define.
(ppc_optimize_expr): Declare.
include/
* opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first.
(PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define.
opcodes/
* ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries
with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
The weaker release consistency support of ARMv8.3-A is allowed as an optional
extension for ARMv8.2-A, so separate command line option and feature flag is
added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on.
opcodes/
* aarch64-tbl.h (RCPC, RCPC_INSN): Define.
(aarch64_opcode_table): Use RCPC_INSN.
include/
* opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define.
(AARCH64_ARCH_V8_3): Update.
gas/
* config/tc-aarch64.c (aarch64_features): Add rcpc.
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.d: This.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.s: This.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
gas * config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA
extension.
(riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is
enabled and no other ABI is specified.
include * opcode/riscv-opc.h: Add support for the "q" ISA extension.
opcodes * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA
extension.
* riscv-opcodes/all-opcodes: Likewise.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Replace `0' and `4' operand codes with `.' and `F' respectively to free
up the `0'-`4' consecutive range. No functional change.
gas/
* config/tc-mips.c (mips16_macro_build): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_macro): Likewise.
include/
* opcode/mips.h: Replace `0' and `4' operand codes with `.' and
`F' respectively.
opcodes/
* mips16-opc.c (decode_mips16_operand): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_opcodes): Likewise.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
ARMv8.3 is an architectural extension of ARMv8. Add the
feature macro and -march=armv8.3-a gas command line option
for the ARM target.
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
* config/tc-arm.c (arm_archs): Add "armv8.3-a".
* doc/c-arm.texi (-march): Add "armv8.3-a".
include/
* opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New.
(ARM_ARCH_V8_3A): New.
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
Add support for FCMLA and FCADD complex arithmetic SIMD instructions.
FCMLA has an indexed element variant where the index range has to be
treated specially because a complex number takes two elements and the
indexed vector size depends on the other operands.
These complex number SIMD instructions are part of ARMv8.3
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
include/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1,
AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3.
(enum aarch64_op): Add OP_FCMLA_ELEM.
opcodes/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define.
(aarch64_feature_simd_v8_3, SIMD_V8_3): Define.
(aarch64_opcode_table): Add fcmla and fcadd.
(AARCH64_OPERANDS): Add IMM_ROT{1,2,3}.
* aarch64-asm.h (aarch64_ins_imm_rotate): Declare.
* aarch64-asm.c (aarch64_ins_imm_rotate): Define.
* aarch64-dis.h (aarch64_ext_imm_rotate): Declare.
* aarch64-dis.c (aarch64_ext_imm_rotate): Define.
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}.
* aarch64-opc.c (fields): Add FLD_rotate{1,2,3}.
(operand_general_constraint_met_p): Rotate and index range check.
(aarch64_print_operand): Handle rotate operand.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*.
* testsuite/gas/aarch64/advsimd-armv8_3.d: New.
* testsuite/gas/aarch64/advsimd-armv8_3.s: New.
* testsuite/gas/aarch64/illegal-fcmla.s: New.
* testsuite/gas/aarch64/illegal-fcmla.l: New.
* testsuite/gas/aarch64/illegal-fcmla.d: New.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (cortex-m33): Declare new processor.
* doc/c-arm.texi (-mcpu ARM command line option): Document new
Cortex-M33 processor.
* NEWS: Mention ARM Cortex-M33 support.
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
In preparation to moving to a world where arc instructions can be 2, 4,
6, or 8 bytes long, make some macros 64-bit safe.
There should be no functional change after this commit.
include/ChangeLog:
* opcode/arc.h: Make macros 64-bit safe.
In preparation for moving to a world where arc instructions can be 2, 4,
6, or 8 bytes in length, replace the ARC_SHORT macro (which is either
true of false) with an arc_opcode_len function that returns a length in
bytes.
There should be no functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
arc_opcode_len.
include/ChangeLog:
* opcode/arc.h (arc_opcode_len): Declare.
(ARC_SHORT): Delete.
opcodes/ChangeLog:
* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
with arc_opcode_len.
(find_format_long_instructions): Likewise.
* arc-opc.c (arc_opcode_len): New function.
The ARC (short) instructions are using a special register number to
indicate is the instruction uses a long immediate (LIMM). In the case
of short instruction, this LIMM indicator depends on the ISA version
used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same
value used in "long" instructions. However, for the ARCv2 processors,
this LIMM indicator is 0x1E.
This patch fixes the LIMM detection for ARCv1 ISA and adds two tests.
gas/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/shortlimm_a7.d: New file.
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
include/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_OPCODE_ARCV2): New define.
opcodes/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
usage on ISA basis.
