71 Commits

Author	SHA1	Message	Date
Simon Marchi	328d42d87e	gdb: remove current_top_target function ... The current_top_target function is a hidden dependency on the current inferior. Since I'd like to slowly move towards reducing our dependency on the global current state, remove this function and make callers use current_inferior ()->top_target () There is no expected change in behavior, but this one step towards making those callers use the inferior from their context, rather than refer to the global current inferior. gdb/ChangeLog: * target.h (current_top_target): Remove, make callers use the current inferior instead. * target.c (current_top_target): Remove. Change-Id: Iccd457036f84466cdaa3865aa3f9339a24ea001d	2021-03-24 18:08:24 -04:00
Andrew Burgess	95ce627aeb	gdb: write target description into core file ... When a core file is created from within GDB add the target description into a note within the core file. When loading a core file, if the target description note is present then load the target description from the core file. The benefit of this is that we can be sure that, when analysing the core file within GDB, that we are using the exact same target description as was in use at the time the core file was created. GDB already supports a mechanism for figuring out the target description from a given corefile; gdbarch_core_read_description. This new mechanism (GDB adding the target description) is not going to replace the old mechanism. Core files generated outside of GDB will not include a target description, and so GDB still needs to be able to figure out a target description for these files. My primary motivation for adding this feature is that, in a future commit, I will be adding support for bare metal core dumps on some targets. For RISC-V specifically, I want to be able to dump all the available control status registers. As different targets will present different sets of register in their target description, including registers that are possibly not otherwise known to GDB I wanted a way to capture these registers in the core dump. I therefore need a mechanism to write out an arbitrary set of registers, and to then derive a target description from this arbitrary set when later loading the core file. The obvious approach (I think) is to just reuse the target description. Once I'd decided to add support for writing out the target description I could either choose to make this RISC-V only, or make it generic. I figure that having the target description in the core file doesn't hurt, and _might_ be helpful. So that's how I got here, general support for including the target description in GDB generated core files. In previous versions of this patch I added the target description from generic code (in gcore.c). However, doing this creates a dependency between GDB's common code and bfd ELF support. As ELF support in gdb is optional (for example the target x86_64-apple-darwin20.3.0 does not include ELF support) then having gcore.c require ELF support would break the GDB build in some cases. Instead, in this version of the patch, writing the target description note is done from each specific targets make notes function. Each of these now calls a common function in gcore-elf.c (which is only linked in when bfd has ELF support). And so only targets that are ELF based will call the new function and we can therefore avoid an unconditional dependency on ELF support. gdb/ChangeLog: * corelow.c: Add 'xml-tdesc.h' include. (core_target::read_description): Load the target description from the core file when possible. * fbsd-tdep.c (fbsd_make_corefile_notes): Add target description note. * gcore-elf.c: Add 'gdbsupport/tdesc.h' include. (gcore_elf_make_tdesc_note): New function. * gcore-elf.h (gcore_elf_make_tdesc_note): Declare. * linux-tdep.c (linux_make_corefile_notes): Add target description note.	2021-03-05 17:21:41 +00:00
Andrew Burgess	f3a5df7bd6	gdb: unify parts of the Linux and FreeBSD core dumping code ... While reviewing the Linux and FreeBSD core dumping code within GDB for another patch series, I noticed that the code that collects the registers for each thread and writes these into ELF note format is basically identical between Linux and FreeBSD. This commit merges this code and moves it into a new file gcore-elf.c. The function find_signalled_thread is moved from linux-tdep.c to gcore.c despite not being shared. A later commit will make use of this function. I did merge, and then revert a previous version of this patch (commit 82a1fd3a49 for the original patch and 03642b7189 for the revert). The problem with the original patch is that it introduced a unconditional dependency between GDB and some ELF specific functions in the BFD library, e.g. elfcore_write_prstatus and elfcore_write_register_note. It was pointed out in this mailing list post: https://sourceware.org/pipermail/gdb-patches/2021-February/175750.html that this change was breaking any build of GDB for non-ELF targets. To confirm this breakage, and to test this new version of GDB I configured and built for the target x86_64-apple-darwin20.3.0. Where the previous version of this patch placed all of the common code into gcore.c, which is included in all builds of GDB, this new patch only places non-ELF specific generic code (i.e. find_signalled_thread) into gcore.c, the ELF specific code is put into the new gcore-elf.c file, which is only included in GDB if BFD has ELF support. The contents of gcore-elf.c are referenced unconditionally from linux-tdep.c and fbsd-tdep.c, this is fine, we previously always assumed that these two targets required ELF support, and we continue to make that assumption after this patch; nothing has changed there. With my previous version of this patch the darwin target mentioned above failed to build, but with the new version, the target builds fine. There are a couple of minor changes to the FreeBSD target after this commit, but I believe that these are changes for the better: (1) For FreeBSD we always used to record the thread-id in the core file by using ptid_t.lwp (). In contrast the Linux code did this: /* For remote targets the LWP may not be available, so use the TID. */ long lwp = ptid.lwp (); if (lwp == 0) lwp = ptid.tid (); Both target now do this: /* The LWP is often not available for bare metal target, in which case use the tid instead. */ if (ptid.lwp_p ()) lwp = ptid.lwp (); else lwp = ptid.tid (); Which is equivalent for Linux, but is a change for FreeBSD. I think that all this means is that in some cases where GDB might have previously recorded a thread-id of 0 for each thread, we might now get something more useful. (2) When collecting the registers for Linux we collected into a zero initialised buffer. By contrast on FreeBSD the buffer is left uninitialised. In the new code the buffer is always zero initialised. I suspect once the registers are copied into the buffer there's probably no gaps left so this makes no difference, but if it does then using zeros rather than random bits of GDB's memory is probably a good thing. Otherwise, there should be no other user visible changes after this commit. Tested this on x86-64/GNU-Linux and x86-64/FreeBSD-12.2 with no regressions. gdb/ChangeLog: * Makefile.in (SFILES): Add gcore-elf.c. (HFILES_NO_SRCDIR): Add gcore-elf.h * configure: Regenerate. * configure.ac: Add gcore-elf.o to CONFIG_OBS if we have ELF support. * fbsd-tdep.c: Add 'gcore-elf.h' include. (struct fbsd_collect_regset_section_cb_data): Delete. (fbsd_collect_regset_section_cb): Delete. (fbsd_collect_thread_registers): Delete. (struct fbsd_corefile_thread_data): Delete. (fbsd_corefile_thread): Delete. (fbsd_make_corefile_notes): Call gcore_elf_build_thread_register_notes instead of the now deleted FreeBSD code. * gcore-elf.c: New file, the content was moved here from linux-tdep.c, functions were renamed and given minor cleanup. * gcore-elf.h: New file. * gcore.c (gcore_find_signalled_thread): Moved here from linux-tdep.c and given a new name. Minor cleanups. * gcore.h (gcore_find_signalled_thread): Declare. * linux-tdep.c: Add 'gcore.h' and 'gcore-elf.h' includes. (struct linux_collect_regset_section_cb_data): Delete. (linux_collect_regset_section_cb): Delete. (linux_collect_thread_registers): Delete. (linux_corefile_thread): Call gcore_elf_build_thread_register_notes. (find_signalled_thread): Delete. (linux_make_corefile_notes): Call gcore_find_signalled_thread.	2021-03-05 17:21:40 +00:00
Andrew Burgess	03642b7189	gdb: revert "gdb: unify parts of the Linux and FreeBSD core dumping code" ... This reverts commit 82a1fd3a49. It was pointed out: https://sourceware.org/pipermail/gdb-patches/2021-February/175750.html that commit 82a1fd3a49 caused GDB to have an unconditional dependency on ELF specific parts of BFD. What this means is that if GDB and BFD are built for a non-elf target then there will be undefined symbol references within GDB. The right solution isn't immediately obvious. So rather than rush a fix in I'm reverting this commit for now, and will bring it back once I have a good solution. gdb/ChangeLog: * gcore.c (struct gcore_collect_regset_section_cb_data): Delete. (gcore_collect_regset_section_cb): Delete. (gcore_collect_thread_registers): Delete. (gcore_build_thread_register_notes): Delete. (gcore_find_signalled_thread): Delete. * gcore.h: Remove 'gdbsupport/gdb_signals.h' include and delete 'gdbarch' and 'thread_info' declarations. (gcore_build_thread_register_notes): Delete declaration. (gcore_find_signalled_thread): Likewise. * fbsd-tdep.c: Remove 'gcore.h' include. (struct fbsd_collect_regset_section_cb_data): New struct. (fbsd_collect_regset_section_cb): New function. (fbsd_collect_thread_registers): New function. (struct fbsd_corefile_thread_data): New struct. (fbsd_corefile_thread): New function. (fbsd_make_corefile_notes): Call FreeBSD specific code. * linux-tdep.c: Remove 'gcore.h' include. (struct linux_collect_regset_section_cb_data): New struct. (linux_collect_regset_section_cb): New function. (linux_collect_thread_registers): New function. (linux_corefile_thread): Call Linux specific code. (find_signalled_thread): New function. (linux_make_corefile_notes): Call find_signalled_thread.	2021-02-09 21:46:12 +00:00
Andrew Burgess	82a1fd3a49	gdb: unify parts of the Linux and FreeBSD core dumping code ... While reviewing the Linux and FreeBSD core dumping code within GDB for another patch series, I noticed that the code that collects the registers for each thread and writes these into ELF note format is basically identical between Linux and FreeBSD. This commit merges this code and moves it into the gcore.c file, which seemed like the right place for generic writing a core file code. The function find_signalled_thread is moved from linux-tdep.c despite not being shared. A later commit will make use of this function. There are a couple of minor changes to the FreeBSD target after this commit, but I believe that these are changes for the better: (1) For FreeBSD we always used to record the thread-id in the core file by using ptid_t.lwp (). In contrast the Linux code did this: /* For remote targets the LWP may not be available, so use the TID. */ long lwp = ptid.lwp (); if (lwp == 0) lwp = ptid.tid (); Both target now do this: /* The LWP is often not available for bare metal target, in which case use the tid instead. */ if (ptid.lwp_p ()) lwp = ptid.lwp (); else lwp = ptid.tid (); Which is equivalent for Linux, but is a change for FreeBSD. I think that all this means is that in some cases where GDB might have previously recorded a thread-id of 0 for each thread, we might now get something more useful. (2) When collecting the registers for Linux we collected into a zero initialised buffer. By contrast on FreeBSD the buffer is left uninitialised. In the new code the buffer is always zero initialised. I suspect once the registers are copied into the buffer there's probably no gaps left so this makes no difference, but if it does then using zeros rather than random bits of GDB's memory is probably a good thing. Otherwise, there should be no other user visible changes after this commit. Tested this on x86-64/GNU-Linux and x86-64/FreeBSD-12.2 with no regressions. gdb/ChangeLog: * Makefile.in (HFILES_NO_SRCDIR): Add corefile.h. * gcore.c (struct gcore_collect_regset_section_cb_data): Moved here from linux-tdep.c and given a new name. Minor cleanups. (gcore_collect_regset_section_cb): Likewise. (gcore_collect_thread_registers): Likewise. (gcore_build_thread_register_notes): Likewise. (gcore_find_signalled_thread): Likewise. * gcore.h (gcore_build_thread_register_notes): Declare. (gcore_find_signalled_thread): Declare. * fbsd-tdep.c: Add 'gcore.h' include. (struct fbsd_collect_regset_section_cb_data): Delete. (fbsd_collect_regset_section_cb): Delete. (fbsd_collect_thread_registers): Delete. (struct fbsd_corefile_thread_data): Delete. (fbsd_corefile_thread): Delete. (fbsd_make_corefile_notes): Call gcore_build_thread_register_notes instead of the now deleted FreeBSD code. * linux-tdep.c: Add 'gcore.h' include. (struct linux_collect_regset_section_cb_data): Delete. (linux_collect_regset_section_cb): Delete. (linux_collect_thread_registers): Delete. (linux_corefile_thread): Call gcore_build_thread_register_notes. (find_signalled_thread): Delete. (linux_make_corefile_notes): Call gcore_find_signalled_thread.	2021-02-01 10:35:18 +00:00
Joel Brobecker	3666a04883	Update copyright year range in all GDB files ... This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.	2021-01-01 12:12:21 +04:00
Simon Marchi	dda83cd783	gdb, gdbserver, gdbsupport: fix leading space vs tabs issues ... Many spots incorrectly use only spaces for indentation (for example, there are a lot of spots in ada-lang.c). I've always found it awkward when I needed to edit one of these spots: do I keep the original wrong indentation, or do I fix it? What if the lines around it are also wrong, do I fix them too? I probably don't want to fix them in the same patch, to avoid adding noise to my patch. So I propose to fix as much as possible once and for all (hopefully). One typical counter argument for this is that it makes code archeology more difficult, because git-blame will show this commit as the last change for these lines. My counter counter argument is: when git-blaming, you often need to do "blame the file at the parent commit" anyway, to go past some other refactor that touched the line you are interested in, but is not the change you are looking for. So you already need a somewhat efficient way to do this. Using some interactive tool, rather than plain git-blame, makes this trivial. For example, I use "tig blame <file>", where going back past the commit that changed the currently selected line is one keystroke. It looks like Magit in Emacs does it too (though I've never used it). Web viewers of Github and Gitlab do it too. My point is that it won't really make archeology more difficult. The other typical counter argument is that it will cause conflicts with existing patches. That's true... but it's a one time cost, and those are not conflicts that are difficult to resolve. I have also tried "git rebase --ignore-whitespace", it seems to work well. Although that will re-introduce the faulty indentation, so one needs to take care of fixing the indentation in the patch after that (which is easy). gdb/ChangeLog: * aarch64-linux-tdep.c: Fix indentation. * aarch64-ravenscar-thread.c: Fix indentation. * aarch64-tdep.c: Fix indentation. * aarch64-tdep.h: Fix indentation. * ada-lang.c: Fix indentation. * ada-lang.h: Fix indentation. * ada-tasks.c: Fix indentation. * ada-typeprint.c: Fix indentation. * ada-valprint.c: Fix indentation. * ada-varobj.c: Fix indentation. * addrmap.c: Fix indentation. * addrmap.h: Fix indentation. * agent.c: Fix indentation. * aix-thread.c: Fix indentation. * alpha-bsd-nat.c: Fix indentation. * alpha-linux-tdep.c: Fix indentation. * alpha-mdebug-tdep.c: Fix indentation. * alpha-nbsd-tdep.c: Fix indentation. * alpha-obsd-tdep.c: Fix indentation. * alpha-tdep.c: Fix indentation. * amd64-bsd-nat.c: Fix indentation. * amd64-darwin-tdep.c: Fix indentation. * amd64-linux-nat.c: Fix indentation. * amd64-linux-tdep.c: Fix indentation. * amd64-nat.c: Fix indentation. * amd64-obsd-tdep.c: Fix indentation. * amd64-tdep.c: Fix indentation. * amd64-windows-tdep.c: Fix indentation. * annotate.c: Fix indentation. * arc-tdep.c: Fix indentation. * arch-utils.c: Fix indentation. * arch/arm-get-next-pcs.c: Fix indentation. * arch/arm.c: Fix indentation. * arm-linux-nat.c: Fix indentation. * arm-linux-tdep.c: Fix indentation. * arm-nbsd-tdep.c: Fix indentation. * arm-pikeos-tdep.c: Fix indentation. * arm-tdep.c: Fix indentation. * arm-tdep.h: Fix indentation. * arm-wince-tdep.c: Fix indentation. * auto-load.c: Fix indentation. * auxv.c: Fix indentation. * avr-tdep.c: Fix indentation. * ax-gdb.c: Fix indentation. * ax-general.c: Fix indentation. * bfin-linux-tdep.c: Fix indentation. * block.c: Fix indentation. * block.h: Fix indentation. * blockframe.c: Fix indentation. * bpf-tdep.c: Fix indentation. * break-catch-sig.c: Fix indentation. * break-catch-syscall.c: Fix indentation. * break-catch-throw.c: Fix indentation. * breakpoint.c: Fix indentation. * breakpoint.h: Fix indentation. * bsd-uthread.c: Fix indentation. * btrace.c: Fix indentation. * build-id.c: Fix indentation. * buildsym-legacy.h: Fix indentation. * buildsym.c: Fix indentation. * c-typeprint.c: Fix indentation. * c-valprint.c: Fix indentation. * c-varobj.c: Fix indentation. * charset.c: Fix indentation. * cli/cli-cmds.c: Fix indentation. * cli/cli-decode.c: Fix indentation. * cli/cli-decode.h: Fix indentation. * cli/cli-script.c: Fix indentation. * cli/cli-setshow.c: Fix indentation. * coff-pe-read.c: Fix indentation. * coffread.c: Fix indentation. * compile/compile-cplus-types.c: Fix indentation. * compile/compile-object-load.c: Fix indentation. * compile/compile-object-run.c: Fix indentation. * completer.c: Fix indentation. * corefile.c: Fix indentation. * corelow.c: Fix indentation. * cp-abi.h: Fix indentation. * cp-namespace.c: Fix indentation. * cp-support.c: Fix indentation. * cp-valprint.c: Fix indentation. * cris-linux-tdep.c: Fix indentation. * cris-tdep.c: Fix indentation. * darwin-nat-info.c: Fix indentation. * darwin-nat.c: Fix indentation. * darwin-nat.h: Fix indentation. * dbxread.c: Fix indentation. * dcache.c: Fix indentation. * disasm.c: Fix indentation. * dtrace-probe.c: Fix indentation. * dwarf2/abbrev.c: Fix indentation. * dwarf2/attribute.c: Fix indentation. * dwarf2/expr.c: Fix indentation. * dwarf2/frame.c: Fix indentation. * dwarf2/index-cache.c: Fix indentation. * dwarf2/index-write.c: Fix indentation. * dwarf2/line-header.c: Fix indentation. * dwarf2/loc.c: Fix indentation. * dwarf2/macro.c: Fix indentation. * dwarf2/read.c: Fix indentation. * dwarf2/read.h: Fix indentation. * elfread.c: Fix indentation. * eval.c: Fix indentation. * event-top.c: Fix indentation. * exec.c: Fix indentation. * exec.h: Fix indentation. * expprint.c: Fix indentation. * f-lang.c: Fix indentation. * f-typeprint.c: Fix indentation. * f-valprint.c: Fix indentation. * fbsd-nat.c: Fix indentation. * fbsd-tdep.c: Fix indentation. * findvar.c: Fix indentation. * fork-child.c: Fix indentation. * frame-unwind.c: Fix indentation. * frame-unwind.h: Fix indentation. * frame.c: Fix indentation. * frv-linux-tdep.c: Fix indentation. * frv-tdep.c: Fix indentation. * frv-tdep.h: Fix indentation. * ft32-tdep.c: Fix indentation. * gcore.c: Fix indentation. * gdb_bfd.c: Fix indentation. * gdbarch.sh: Fix indentation. * gdbarch.c: Re-generate * gdbarch.h: Re-generate. * gdbcore.h: Fix indentation. * gdbthread.h: Fix indentation. * gdbtypes.c: Fix indentation. * gdbtypes.h: Fix indentation. * glibc-tdep.c: Fix indentation. * gnu-nat.c: Fix indentation. * gnu-nat.h: Fix indentation. * gnu-v2-abi.c: Fix indentation. * gnu-v3-abi.c: Fix indentation. * go32-nat.c: Fix indentation. * guile/guile-internal.h: Fix indentation. * guile/scm-cmd.c: Fix indentation. * guile/scm-frame.c: Fix indentation. * guile/scm-iterator.c: Fix indentation. * guile/scm-math.c: Fix indentation. * guile/scm-ports.c: Fix indentation. * guile/scm-pretty-print.c: Fix indentation. * guile/scm-value.c: Fix indentation. * h8300-tdep.c: Fix indentation. * hppa-linux-nat.c: Fix indentation. * hppa-linux-tdep.c: Fix indentation. * hppa-nbsd-nat.c: Fix indentation. * hppa-nbsd-tdep.c: Fix indentation. * hppa-obsd-nat.c: Fix indentation. * hppa-tdep.c: Fix indentation. * hppa-tdep.h: Fix indentation. * i386-bsd-nat.c: Fix indentation. * i386-darwin-nat.c: Fix indentation. * i386-darwin-tdep.c: Fix indentation. * i386-dicos-tdep.c: Fix indentation. * i386-gnu-nat.c: Fix indentation. * i386-linux-nat.c: Fix indentation. * i386-linux-tdep.c: Fix indentation. * i386-nto-tdep.c: Fix indentation. * i386-obsd-tdep.c: Fix indentation. * i386-sol2-nat.c: Fix indentation. * i386-tdep.c: Fix indentation. * i386-tdep.h: Fix indentation. * i386-windows-tdep.c: Fix indentation. * i387-tdep.c: Fix indentation. * i387-tdep.h: Fix indentation. * ia64-libunwind-tdep.c: Fix indentation. * ia64-libunwind-tdep.h: Fix indentation. * ia64-linux-nat.c: Fix indentation. * ia64-linux-tdep.c: Fix indentation. * ia64-tdep.c: Fix indentation. * ia64-tdep.h: Fix indentation. * ia64-vms-tdep.c: Fix indentation. * infcall.c: Fix indentation. * infcmd.c: Fix indentation. * inferior.c: Fix indentation. * infrun.c: Fix indentation. * iq2000-tdep.c: Fix indentation. * language.c: Fix indentation. * linespec.c: Fix indentation. * linux-fork.c: Fix indentation. * linux-nat.c: Fix indentation. * linux-tdep.c: Fix indentation. * linux-thread-db.c: Fix indentation. * lm32-tdep.c: Fix indentation. * m2-lang.c: Fix indentation. * m2-typeprint.c: Fix indentation. * m2-valprint.c: Fix indentation. * m32c-tdep.c: Fix indentation. * m32r-linux-tdep.c: Fix indentation. * m32r-tdep.c: Fix indentation. * m68hc11-tdep.c: Fix indentation. * m68k-bsd-nat.c: Fix indentation. * m68k-linux-nat.c: Fix indentation. * m68k-linux-tdep.c: Fix indentation. * m68k-tdep.c: Fix indentation. * machoread.c: Fix indentation. * macrocmd.c: Fix indentation. * macroexp.c: Fix indentation. * macroscope.c: Fix indentation. * macrotab.c: Fix indentation. * macrotab.h: Fix indentation. * main.c: Fix indentation. * mdebugread.c: Fix indentation. * mep-tdep.c: Fix indentation. * mi/mi-cmd-catch.c: Fix indentation. * mi/mi-cmd-disas.c: Fix indentation. * mi/mi-cmd-env.c: Fix indentation. * mi/mi-cmd-stack.c: Fix indentation. * mi/mi-cmd-var.c: Fix indentation. * mi/mi-cmds.c: Fix indentation. * mi/mi-main.c: Fix indentation. * mi/mi-parse.c: Fix indentation. * microblaze-tdep.c: Fix indentation. * minidebug.c: Fix indentation. * minsyms.c: Fix indentation. * mips-linux-nat.c: Fix indentation. * mips-linux-tdep.c: Fix indentation. * mips-nbsd-tdep.c: Fix indentation. * mips-tdep.c: Fix indentation. * mn10300-linux-tdep.c: Fix indentation. * mn10300-tdep.c: Fix indentation. * moxie-tdep.c: Fix indentation. * msp430-tdep.c: Fix indentation. * namespace.h: Fix indentation. * nat/fork-inferior.c: Fix indentation. * nat/gdb_ptrace.h: Fix indentation. * nat/linux-namespaces.c: Fix indentation. * nat/linux-osdata.c: Fix indentation. * nat/netbsd-nat.c: Fix indentation. * nat/x86-dregs.c: Fix indentation. * nbsd-nat.c: Fix indentation. * nbsd-tdep.c: Fix indentation. * nios2-linux-tdep.c: Fix indentation. * nios2-tdep.c: Fix indentation. * nto-procfs.c: Fix indentation. * nto-tdep.c: Fix indentation. * objfiles.c: Fix indentation. * objfiles.h: Fix indentation. * opencl-lang.c: Fix indentation. * or1k-tdep.c: Fix indentation. * osabi.c: Fix indentation. * osabi.h: Fix indentation. * osdata.c: Fix indentation. * p-lang.c: Fix indentation. * p-typeprint.c: Fix indentation. * p-valprint.c: Fix indentation. * parse.c: Fix indentation. * ppc-linux-nat.c: Fix indentation. * ppc-linux-tdep.c: Fix indentation. * ppc-nbsd-nat.c: Fix indentation. * ppc-nbsd-tdep.c: Fix indentation. * ppc-obsd-nat.c: Fix indentation. * ppc-ravenscar-thread.c: Fix indentation. * ppc-sysv-tdep.c: Fix indentation. * ppc64-tdep.c: Fix indentation. * printcmd.c: Fix indentation. * proc-api.c: Fix indentation. * producer.c: Fix indentation. * producer.h: Fix indentation. * prologue-value.c: Fix indentation. * prologue-value.h: Fix indentation. * psymtab.c: Fix indentation. * python/py-arch.c: Fix indentation. * python/py-bpevent.c: Fix indentation. * python/py-event.c: Fix indentation. * python/py-event.h: Fix indentation. * python/py-finishbreakpoint.c: Fix indentation. * python/py-frame.c: Fix indentation. * python/py-framefilter.c: Fix indentation. * python/py-inferior.c: Fix indentation. * python/py-infthread.c: Fix indentation. * python/py-objfile.c: Fix indentation. * python/py-prettyprint.c: Fix indentation. * python/py-registers.c: Fix indentation. * python/py-signalevent.c: Fix indentation. * python/py-stopevent.c: Fix indentation. * python/py-stopevent.h: Fix indentation. * python/py-threadevent.c: Fix indentation. * python/py-tui.c: Fix indentation. * python/py-unwind.c: Fix indentation. * python/py-value.c: Fix indentation. * python/py-xmethods.c: Fix indentation. * python/python-internal.h: Fix indentation. * python/python.c: Fix indentation. * ravenscar-thread.c: Fix indentation. * record-btrace.c: Fix indentation. * record-full.c: Fix indentation. * record.c: Fix indentation. * reggroups.c: Fix indentation. * regset.h: Fix indentation. * remote-fileio.c: Fix indentation. * remote.c: Fix indentation. * reverse.c: Fix indentation. * riscv-linux-tdep.c: Fix indentation. * riscv-ravenscar-thread.c: Fix indentation. * riscv-tdep.c: Fix indentation. * rl78-tdep.c: Fix indentation. * rs6000-aix-tdep.c: Fix indentation. * rs6000-lynx178-tdep.c: Fix indentation. * rs6000-nat.c: Fix indentation. * rs6000-tdep.c: Fix indentation. * rust-lang.c: Fix indentation. * rx-tdep.c: Fix indentation. * s12z-tdep.c: Fix indentation. * s390-linux-tdep.c: Fix indentation. * score-tdep.c: Fix indentation. * ser-base.c: Fix indentation. * ser-mingw.c: Fix indentation. * ser-uds.c: Fix indentation. * ser-unix.c: Fix indentation. * serial.c: Fix indentation. * sh-linux-tdep.c: Fix indentation. * sh-nbsd-tdep.c: Fix indentation. * sh-tdep.c: Fix indentation. * skip.c: Fix indentation. * sol-thread.c: Fix indentation. * solib-aix.c: Fix indentation. * solib-darwin.c: Fix indentation. * solib-frv.c: Fix indentation. * solib-svr4.c: Fix indentation. * solib.c: Fix indentation. * source.c: Fix indentation. * sparc-linux-tdep.c: Fix indentation. * sparc-nbsd-tdep.c: Fix indentation. * sparc-obsd-tdep.c: Fix indentation. * sparc-ravenscar-thread.c: Fix indentation. * sparc-tdep.c: Fix indentation. * sparc64-linux-tdep.c: Fix indentation. * sparc64-nbsd-tdep.c: Fix indentation. * sparc64-obsd-tdep.c: Fix indentation. * sparc64-tdep.c: Fix indentation. * stabsread.c: Fix indentation. * stack.c: Fix indentation. * stap-probe.c: Fix indentation. * stubs/ia64vms-stub.c: Fix indentation. * stubs/m32r-stub.c: Fix indentation. * stubs/m68k-stub.c: Fix indentation. * stubs/sh-stub.c: Fix indentation. * stubs/sparc-stub.c: Fix indentation. * symfile-mem.c: Fix indentation. * symfile.c: Fix indentation. * symfile.h: Fix indentation. * symmisc.c: Fix indentation. * symtab.c: Fix indentation. * symtab.h: Fix indentation. * target-float.c: Fix indentation. * target.c: Fix indentation. * target.h: Fix indentation. * tic6x-tdep.c: Fix indentation. * tilegx-linux-tdep.c: Fix indentation. * tilegx-tdep.c: Fix indentation. * top.c: Fix indentation. * tracefile-tfile.c: Fix indentation. * tracepoint.c: Fix indentation. * tui/tui-disasm.c: Fix indentation. * tui/tui-io.c: Fix indentation. * tui/tui-regs.c: Fix indentation. * tui/tui-stack.c: Fix indentation. * tui/tui-win.c: Fix indentation. * tui/tui-winsource.c: Fix indentation. * tui/tui.c: Fix indentation. * typeprint.c: Fix indentation. * ui-out.h: Fix indentation. * unittests/copy_bitwise-selftests.c: Fix indentation. * unittests/memory-map-selftests.c: Fix indentation. * utils.c: Fix indentation. * v850-tdep.c: Fix indentation. * valarith.c: Fix indentation. * valops.c: Fix indentation. * valprint.c: Fix indentation. * valprint.h: Fix indentation. * value.c: Fix indentation. * value.h: Fix indentation. * varobj.c: Fix indentation. * vax-tdep.c: Fix indentation. * windows-nat.c: Fix indentation. * windows-tdep.c: Fix indentation. * xcoffread.c: Fix indentation. * xml-syscall.c: Fix indentation. * xml-tdesc.c: Fix indentation. * xstormy16-tdep.c: Fix indentation. * xtensa-config.c: Fix indentation. * xtensa-linux-nat.c: Fix indentation. * xtensa-linux-tdep.c: Fix indentation. * xtensa-tdep.c: Fix indentation. gdbserver/ChangeLog: * ax.cc: Fix indentation. * dll.cc: Fix indentation. * inferiors.h: Fix indentation. * linux-low.cc: Fix indentation. * linux-nios2-low.cc: Fix indentation. * linux-ppc-ipa.cc: Fix indentation. * linux-ppc-low.cc: Fix indentation. * linux-x86-low.cc: Fix indentation. * linux-xtensa-low.cc: Fix indentation. * regcache.cc: Fix indentation. * server.cc: Fix indentation. * tracepoint.cc: Fix indentation. gdbsupport/ChangeLog: * common-exceptions.h: Fix indentation. * event-loop.cc: Fix indentation. * fileio.cc: Fix indentation. * filestuff.cc: Fix indentation. * gdb-dlfcn.cc: Fix indentation. * gdb_string_view.h: Fix indentation. * job-control.cc: Fix indentation. * signals.cc: Fix indentation. Change-Id: I4bad7ae6be0fbe14168b8ebafb98ffe14964a695	2020-11-02 10:28:45 -05:00
Simon Marchi	c21f37a889	gdb: make gdbarch_make_corefile_notes return a unique ptr ... This patch starts by making the gdbarch_make_corefile_notes function return a gdb::unique_xmalloc_ptr<char> and takes care of the fallouts, mostly in linux-tdep.c and fbsd-tdep.c. The difficulty in these files is that they use the BFD API for writing core files, where you pass in a pointer to a malloc-ed buffer (or NULL in the beginning), it re-allocs it if needed, and returns you the possibly updated pointer. I therefore used this pattern everywhere: note_data.reset (elfcore_write_note (obfd, note_data.release (), ...) This hands over the ownership of note_data to the BFD function for the duration of the call, and then puts its back in note_data right after the call. gdb/ChangeLog: * gdbarch.sh (make_corefile_notes): Return unique pointer. * gdbarch.c: Re-generate. * gdbarch.h: Re-generate. * gcore.c (write_gcore_file_1): Adjust. * fbsd-tdep.c (struct fbsd_collect_regset_section_cb_data): Add constructor. <note_data>: Change type to unique pointer. <abort_iteration>: Change type to bool. (fbsd_collect_regset_section_cb): Adjust to unique pointer. (fbsd_collect_thread_registers): Return void, adjust. (struct fbsd_corefile_thread_data): Add construtor. <note_data>: Change type to unique pointer. (fbsd_corefile_thread): Adjust. (fbsd_make_corefile_notes): Return unique pointer, adjust. * linux-tdep.c (linux_make_mappings_corefile_notes): Change type to unique pointer, adjust. (struct linux_collect_regset_section_cb_data): Add constructor. <note_data>: Change type to unique pointer. <abort_iteration>: Change type to bool. (linux_collect_thread_registers): Return void, adjust. (struct linux_corefile_thread_data): Add constructor. <note_data>: Change type to unique pointer. (linux_corefile_thread): Adjust. (linux_make_corefile_notes): Return unique pointer, adjust. Change-Id: I1e03476bb47b87c6acb3e12204d193f38cc4e02b	2020-10-21 10:43:48 -04:00
Simon Marchi	8f53807e5c	gdb: add type::target_is_stub / type::set_target_is_stub ... Add the `target_is_stub` and `set_target_is_stub` methods on `struct type`, in order to remove the `TYPE_TARGET_STUB` macro. In this patch, the macro is changed to use the getter, so all the call sites of the macro that are used as a setter are changed to use the setter method directly. The next patch will remove the macro completely. gdb/ChangeLog: * gdbtypes.h (struct type) <target_is_stub, set_target_is_stub>: New methods. (TYPE_TARGET_STUB): Use type::is_stub, change all write call sites to use type::set_target_is_stub. Change-Id: I9c71a89adc7ae8d018db9ee156f41c623be0484a	2020-09-14 11:07:59 -04:00
John Baldwin	ed810cc7d3	Implement the skip_solib_resolver gdbarch hook for FreeBSD architectures. ... The ELF runtime linker on all FreeBSD architectures uses the "_rtld_bind" entry point for unresolved PTL entries. FreeBSD/mips has an additional entry point called "_mips_rtld_bind". gdb/ChangeLog: * fbsd-tdep.c (fbsd_skip_solib_resolver): New function. (fbsd_init_abi): Install gdbarch "skip_solib_resolver" method. * fbsd-tdep.h (fbsd_skip_solib_resolver): New prototype. * mips-fbsd-tdep.c (mips_fbsd_skip_solib_resolver): New function. (mips_fbsd_init_abi): Install gdbarch "skip_solib_resolver" method.	2020-07-20 09:10:18 -07:00
John Baldwin	fc238d4a06	Support several new ELF auxiliary vector types on FreeBSD. ... FreeBSD's kernel recently added several ELF auxiliary vector entries to describe the arguments passed to new executable images during exec(). The AT_FREEBSD_ARGC and AT_FREEBSD_ARGV entries give the length and address of the process argument array. AT_FREEBSD_ENVC and AT_FREEBSD_ENVV entries give the length and address of the initial process environment. AT_FREEBSD_PS_STRINGS gives the address of the 'struct ps_strings' object. include/ChangeLog: * elf/common.h (AT_FREEBSD_ARGC, AT_FREEBSD_ARGV, AT_FREEBSD_ENVC) (AT_FREEBSD_ENVV, AT_FREEBSD_PS_STRINGS): Define. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_ARGC, AT_FREEBSD_ARGV, AT_FREEBSD_ENVC, AT_FREEBSD_ENVV, AT_FREEBSD_PS_STRINGS.	2020-07-09 09:39:05 -07:00
Simon Marchi	d0e39ea27c	gdb: add type::name / type::set_name ... Add the `name` and `set_name` methods on `struct type`, in order to remove the `TYPE_NAME` macro. In this patch, the `TYPE_NAME` macro is changed to use `type::name`, so all the call sites that are used to set the type name are changed to use `type::set_name`. The next patch will remove `TYPE_NAME` completely. gdb/ChangeLog: * gdbtypes.h (struct type) <name, set_name>: New methods. (TYPE_CODE): Use type::name. Change all call sites used to set the name to use type::set_name instead.	2020-05-16 12:36:05 -04:00
Simon Marchi	7813437494	gdb: remove TYPE_CODE macro ... Remove TYPE_CODE, changing all the call sites to use type::code directly. This is quite a big diff, but this was mostly done using sed and coccinelle. A few call sites were done by hand. gdb/ChangeLog: * gdbtypes.h (TYPE_CODE): Remove. Change all call sites to use type::code instead.	2020-05-14 13:46:38 -04:00
John Baldwin	a879b4d5a6	Support AT_BSDFLAGS on FreeBSD. ... FreeBSD's kernel recently added a new ELF auxiliary vector entry holding a mask of software features provided by the kernel. This change fixes 'info auxv' to report the name and description for this vector entry instead of '???'. include/ChangeLog: * elf/common.h (AT_FREEBSD_BSDFLAGS): Define. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_BSDFLAGS.	2020-03-26 09:48:28 -07:00
John Baldwin	0afbabf05a	Use std::string for 'psargs'. ... fbsd_make_corefile_notes leaked the memory for psargs previously. gdb/ChangeLog: * fbsd-tdep.c (fbsd_make_corefile_notes): Use std::string for psargs.	2020-03-05 15:02:45 -08:00
Simon Marchi	6c2659886f	gdb: add back declarations for _initialize functions ... I'd like to enable the -Wmissing-declarations warning. However, it warns for every _initialize function, for example: CXX dcache.o /home/smarchi/src/binutils-gdb/gdb/dcache.c: In function ‘void _initialize_dcache()’: /home/smarchi/src/binutils-gdb/gdb/dcache.c:688:1: error: no previous declaration for ‘void _initialize_dcache()’ [-Werror=missing-declarations] _initialize_dcache (void) ^~~~~~~~~~~~~~~~~~ The only practical way forward I found is to add back the declarations, which were removed by this commit: commit 481695ed5f Author: John Baldwin <jhb@FreeBSD.org> Date: Sat Sep 9 11:02:37 2017 -0700 Remove unnecessary function prototypes. I don't think it's a big problem to have the declarations for these functions, but if anybody has a better solution for this, I'll be happy to use it. gdb/ChangeLog: * aarch64-fbsd-nat.c (_initialize_aarch64_fbsd_nat): Add declaration. * aarch64-fbsd-tdep.c (_initialize_aarch64_fbsd_tdep): Add declaration. * aarch64-linux-nat.c (_initialize_aarch64_linux_nat): Add declaration. * aarch64-linux-tdep.c (_initialize_aarch64_linux_tdep): Add declaration. * aarch64-newlib-tdep.c (_initialize_aarch64_newlib_tdep): Add declaration. * aarch64-tdep.c (_initialize_aarch64_tdep): Add declaration. * ada-exp.y (_initialize_ada_exp): Add declaration. * ada-lang.c (_initialize_ada_language): Add declaration. * ada-tasks.c (_initialize_tasks): Add declaration. * agent.c (_initialize_agent): Add declaration. * aix-thread.c (_initialize_aix_thread): Add declaration. * alpha-bsd-nat.c (_initialize_alphabsd_nat): Add declaration. * alpha-linux-nat.c (_initialize_alpha_linux_nat): Add declaration. * alpha-linux-tdep.c (_initialize_alpha_linux_tdep): Add declaration. * alpha-nbsd-tdep.c (_initialize_alphanbsd_tdep): Add declaration. * alpha-obsd-tdep.c (_initialize_alphaobsd_tdep): Add declaration. * alpha-tdep.c (_initialize_alpha_tdep): Add declaration. * amd64-darwin-tdep.c (_initialize_amd64_darwin_tdep): Add declaration. * amd64-dicos-tdep.c (_initialize_amd64_dicos_tdep): Add declaration. * amd64-fbsd-nat.c (_initialize_amd64fbsd_nat): Add declaration. * amd64-fbsd-tdep.c (_initialize_amd64fbsd_tdep): Add declaration. * amd64-linux-nat.c (_initialize_amd64_linux_nat): Add declaration. * amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Add declaration. * amd64-nbsd-nat.c (_initialize_amd64nbsd_nat): Add declaration. * amd64-nbsd-tdep.c (_initialize_amd64nbsd_tdep): Add declaration. * amd64-obsd-nat.c (_initialize_amd64obsd_nat): Add declaration. * amd64-obsd-tdep.c (_initialize_amd64obsd_tdep): Add declaration. * amd64-sol2-tdep.c (_initialize_amd64_sol2_tdep): Add declaration. * amd64-tdep.c (_initialize_amd64_tdep): Add declaration. * amd64-windows-nat.c (_initialize_amd64_windows_nat): Add declaration. * amd64-windows-tdep.c (_initialize_amd64_windows_tdep): Add declaration. * annotate.c (_initialize_annotate): Add declaration. * arc-newlib-tdep.c (_initialize_arc_newlib_tdep): Add declaration. * arc-tdep.c (_initialize_arc_tdep): Add declaration. * arch-utils.c (_initialize_gdbarch_utils): Add declaration. * arm-fbsd-nat.c (_initialize_arm_fbsd_nat): Add declaration. * arm-fbsd-tdep.c (_initialize_arm_fbsd_tdep): Add declaration. * arm-linux-nat.c (_initialize_arm_linux_nat): Add declaration. * arm-linux-tdep.c (_initialize_arm_linux_tdep): Add declaration. * arm-nbsd-nat.c (_initialize_arm_netbsd_nat): Add declaration. * arm-nbsd-tdep.c (_initialize_arm_netbsd_tdep): Add declaration. * arm-obsd-tdep.c (_initialize_armobsd_tdep): Add declaration. * arm-pikeos-tdep.c (_initialize_arm_pikeos_tdep): Add declaration. * arm-symbian-tdep.c (_initialize_arm_symbian_tdep): Add declaration. * arm-tdep.c (_initialize_arm_tdep): Add declaration. * arm-wince-tdep.c (_initialize_arm_wince_tdep): Add declaration. * auto-load.c (_initialize_auto_load): Add declaration. * auxv.c (_initialize_auxv): Add declaration. * avr-tdep.c (_initialize_avr_tdep): Add declaration. * ax-gdb.c (_initialize_ax_gdb): Add declaration. * bfin-linux-tdep.c (_initialize_bfin_linux_tdep): Add declaration. * bfin-tdep.c (_initialize_bfin_tdep): Add declaration. * break-catch-sig.c (_initialize_break_catch_sig): Add declaration. * break-catch-syscall.c (_initialize_break_catch_syscall): Add declaration. * break-catch-throw.c (_initialize_break_catch_throw): Add declaration. * breakpoint.c (_initialize_breakpoint): Add declaration. * bsd-uthread.c (_initialize_bsd_uthread): Add declaration. * btrace.c (_initialize_btrace): Add declaration. * charset.c (_initialize_charset): Add declaration. * cli/cli-cmds.c (_initialize_cli_cmds): Add declaration. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-logging.c (_initialize_cli_logging): Add declaration. * cli/cli-script.c (_initialize_cli_script): Add declaration. * cli/cli-style.c (_initialize_cli_style): Add declaration. * coff-pe-read.c (_initialize_coff_pe_read): Add declaration. * coffread.c (_initialize_coffread): Add declaration. * compile/compile-cplus-types.c (_initialize_compile_cplus_types): Add declaration. * compile/compile.c (_initialize_compile): Add declaration. * complaints.c (_initialize_complaints): Add declaration. * completer.c (_initialize_completer): Add declaration. * copying.c (_initialize_copying): Add declaration. * corefile.c (_initialize_core): Add declaration. * corelow.c (_initialize_corelow): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * cp-namespace.c (_initialize_cp_namespace): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-valprint.c (_initialize_cp_valprint): Add declaration. * cris-linux-tdep.c (_initialize_cris_linux_tdep): Add declaration. * cris-tdep.c (_initialize_cris_tdep): Add declaration. * csky-linux-tdep.c (_initialize_csky_linux_tdep): Add declaration. * csky-tdep.c (_initialize_csky_tdep): Add declaration. * ctfread.c (_initialize_ctfread): Add declaration. * d-lang.c (_initialize_d_language): Add declaration. * darwin-nat-info.c (_initialize_darwin_info_commands): Add declaration. * darwin-nat.c (_initialize_darwin_nat): Add declaration. * dbxread.c (_initialize_dbxread): Add declaration. * dcache.c (_initialize_dcache): Add declaration. * disasm-selftests.c (_initialize_disasm_selftests): Add declaration. * disasm.c (_initialize_disasm): Add declaration. * dtrace-probe.c (_initialize_dtrace_probe): Add declaration. * dummy-frame.c (_initialize_dummy_frame): Add declaration. * dwarf-index-cache.c (_initialize_index_cache): Add declaration. * dwarf-index-write.c (_initialize_dwarf_index_write): Add declaration. * dwarf2-frame-tailcall.c (_initialize_tailcall_frame): Add declaration. * dwarf2-frame.c (_initialize_dwarf2_frame): Add declaration. * dwarf2expr.c (_initialize_dwarf2expr): Add declaration. * dwarf2loc.c (_initialize_dwarf2loc): Add declaration. * dwarf2read.c (_initialize_dwarf2_read): Add declaration. * elfread.c (_initialize_elfread): Add declaration. * exec.c (_initialize_exec): Add declaration. * extension.c (_initialize_extension): Add declaration. * f-lang.c (_initialize_f_language): Add declaration. * f-valprint.c (_initialize_f_valprint): Add declaration. * fbsd-nat.c (_initialize_fbsd_nat): Add declaration. * fbsd-tdep.c (_initialize_fbsd_tdep): Add declaration. * filesystem.c (_initialize_filesystem): Add declaration. * findcmd.c (_initialize_mem_search): Add declaration. * findvar.c (_initialize_findvar): Add declaration. * fork-child.c (_initialize_fork_child): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (_initialize_frame): Add declaration. * frv-linux-tdep.c (_initialize_frv_linux_tdep): Add declaration. * frv-tdep.c (_initialize_frv_tdep): Add declaration. * ft32-tdep.c (_initialize_ft32_tdep): Add declaration. * gcore.c (_initialize_gcore): Add declaration. * gdb-demangle.c (_initialize_gdb_demangle): Add declaration. * gdb_bfd.c (_initialize_gdb_bfd): Add declaration. * gdbarch-selftests.c (_initialize_gdbarch_selftests): Add declaration. * gdbarch.c (_initialize_gdbarch): Add declaration. * gdbtypes.c (_initialize_gdbtypes): Add declaration. * gnu-nat.c (_initialize_gnu_nat): Add declaration. * gnu-v2-abi.c (_initialize_gnu_v2_abi): Add declaration. * gnu-v3-abi.c (_initialize_gnu_v3_abi): Add declaration. * go-lang.c (_initialize_go_language): Add declaration. * go32-nat.c (_initialize_go32_nat): Add declaration. * guile/guile.c (_initialize_guile): Add declaration. * h8300-tdep.c (_initialize_h8300_tdep): Add declaration. * hppa-linux-nat.c (_initialize_hppa_linux_nat): Add declaration. * hppa-linux-tdep.c (_initialize_hppa_linux_tdep): Add declaration. * hppa-nbsd-nat.c (_initialize_hppanbsd_nat): Add declaration. * hppa-nbsd-tdep.c (_initialize_hppanbsd_tdep): Add declaration. * hppa-obsd-nat.c (_initialize_hppaobsd_nat): Add declaration. * hppa-obsd-tdep.c (_initialize_hppabsd_tdep): Add declaration. * hppa-tdep.c (_initialize_hppa_tdep): Add declaration. * i386-bsd-nat.c (_initialize_i386bsd_nat): Add declaration. * i386-cygwin-tdep.c (_initialize_i386_cygwin_tdep): Add declaration. * i386-darwin-nat.c (_initialize_i386_darwin_nat): Add declaration. * i386-darwin-tdep.c (_initialize_i386_darwin_tdep): Add declaration. * i386-dicos-tdep.c (_initialize_i386_dicos_tdep): Add declaration. * i386-fbsd-nat.c (_initialize_i386fbsd_nat): Add declaration. * i386-fbsd-tdep.c (_initialize_i386fbsd_tdep): Add declaration. * i386-gnu-nat.c (_initialize_i386gnu_nat): Add declaration. * i386-gnu-tdep.c (_initialize_i386gnu_tdep): Add declaration. * i386-go32-tdep.c (_initialize_i386_go32_tdep): Add declaration. * i386-linux-nat.c (_initialize_i386_linux_nat): Add declaration. * i386-linux-tdep.c (_initialize_i386_linux_tdep): Add declaration. * i386-nbsd-nat.c (_initialize_i386nbsd_nat): Add declaration. * i386-nbsd-tdep.c (_initialize_i386nbsd_tdep): Add declaration. * i386-nto-tdep.c (_initialize_i386nto_tdep): Add declaration. * i386-obsd-nat.c (_initialize_i386obsd_nat): Add declaration. * i386-obsd-tdep.c (_initialize_i386obsd_tdep): Add declaration. * i386-sol2-nat.c (_initialize_amd64_sol2_nat): Add declaration. * i386-sol2-tdep.c (_initialize_i386_sol2_tdep): Add declaration. * i386-tdep.c (_initialize_i386_tdep): Add declaration. * i386-windows-nat.c (_initialize_i386_windows_nat): Add declaration. * ia64-libunwind-tdep.c (_initialize_libunwind_frame): Add declaration. * ia64-linux-nat.c (_initialize_ia64_linux_nat): Add declaration. * ia64-linux-tdep.c (_initialize_ia64_linux_tdep): Add declaration. * ia64-tdep.c (_initialize_ia64_tdep): Add declaration. * ia64-vms-tdep.c (_initialize_ia64_vms_tdep): Add declaration. * infcall.c (_initialize_infcall): Add declaration. * infcmd.c (_initialize_infcmd): Add declaration. * inflow.c (_initialize_inflow): Add declaration. * infrun.c (_initialize_infrun): Add declaration. * interps.c (_initialize_interpreter): Add declaration. * iq2000-tdep.c (_initialize_iq2000_tdep): Add declaration. * jit.c (_initialize_jit): Add declaration. * language.c (_initialize_language): Add declaration. * linux-fork.c (_initialize_linux_fork): Add declaration. * linux-nat.c (_initialize_linux_nat): Add declaration. * linux-tdep.c (_initialize_linux_tdep): Add declaration. * linux-thread-db.c (_initialize_thread_db): Add declaration. * lm32-tdep.c (_initialize_lm32_tdep): Add declaration. * m2-lang.c (_initialize_m2_language): Add declaration. * m32c-tdep.c (_initialize_m32c_tdep): Add declaration. * m32r-linux-nat.c (_initialize_m32r_linux_nat): Add declaration. * m32r-linux-tdep.c (_initialize_m32r_linux_tdep): Add declaration. * m32r-tdep.c (_initialize_m32r_tdep): Add declaration. * m68hc11-tdep.c (_initialize_m68hc11_tdep): Add declaration. * m68k-bsd-nat.c (_initialize_m68kbsd_nat): Add declaration. * m68k-bsd-tdep.c (_initialize_m68kbsd_tdep): Add declaration. * m68k-linux-nat.c (_initialize_m68k_linux_nat): Add declaration. * m68k-linux-tdep.c (_initialize_m68k_linux_tdep): Add declaration. * m68k-tdep.c (_initialize_m68k_tdep): Add declaration. * machoread.c (_initialize_machoread): Add declaration. * macrocmd.c (_initialize_macrocmd): Add declaration. * macroscope.c (_initialize_macroscope): Add declaration. * maint-test-options.c (_initialize_maint_test_options): Add declaration. * maint-test-settings.c (_initialize_maint_test_settings): Add declaration. * maint.c (_initialize_maint_cmds): Add declaration. * mdebugread.c (_initialize_mdebugread): Add declaration. * memattr.c (_initialize_mem): Add declaration. * mep-tdep.c (_initialize_mep_tdep): Add declaration. * mi/mi-cmd-env.c (_initialize_mi_cmd_env): Add declaration. * mi/mi-cmds.c (_initialize_mi_cmds): Add declaration. * mi/mi-interp.c (_initialize_mi_interp): Add declaration. * mi/mi-main.c (_initialize_mi_main): Add declaration. * microblaze-linux-tdep.c (_initialize_microblaze_linux_tdep): Add declaration. * microblaze-tdep.c (_initialize_microblaze_tdep): Add declaration. * mips-fbsd-nat.c (_initialize_mips_fbsd_nat): Add declaration. * mips-fbsd-tdep.c (_initialize_mips_fbsd_tdep): Add declaration. * mips-linux-nat.c (_initialize_mips_linux_nat): Add declaration. * mips-linux-tdep.c (_initialize_mips_linux_tdep): Add declaration. * mips-nbsd-nat.c (_initialize_mipsnbsd_nat): Add declaration. * mips-nbsd-tdep.c (_initialize_mipsnbsd_tdep): Add declaration. * mips-sde-tdep.c (_initialize_mips_sde_tdep): Add declaration. * mips-tdep.c (_initialize_mips_tdep): Add declaration. * mips64-obsd-nat.c (_initialize_mips64obsd_nat): Add declaration. * mips64-obsd-tdep.c (_initialize_mips64obsd_tdep): Add declaration. * mipsread.c (_initialize_mipsread): Add declaration. * mn10300-linux-tdep.c (_initialize_mn10300_linux_tdep): Add declaration. * mn10300-tdep.c (_initialize_mn10300_tdep): Add declaration. * moxie-tdep.c (_initialize_moxie_tdep): Add declaration. * msp430-tdep.c (_initialize_msp430_tdep): Add declaration. * nds32-tdep.c (_initialize_nds32_tdep): Add declaration. * nios2-linux-tdep.c (_initialize_nios2_linux_tdep): Add declaration. * nios2-tdep.c (_initialize_nios2_tdep): Add declaration. * nto-procfs.c (_initialize_procfs): Add declaration. * objc-lang.c (_initialize_objc_language): Add declaration. * observable.c (_initialize_observer): Add declaration. * opencl-lang.c (_initialize_opencl_language): Add declaration. * or1k-linux-tdep.c (_initialize_or1k_linux_tdep): Add declaration. * or1k-tdep.c (_initialize_or1k_tdep): Add declaration. * osabi.c (_initialize_gdb_osabi): Add declaration. * osdata.c (_initialize_osdata): Add declaration. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * parse.c (_initialize_parse): Add declaration. * ppc-fbsd-nat.c (_initialize_ppcfbsd_nat): Add declaration. * ppc-fbsd-tdep.c (_initialize_ppcfbsd_tdep): Add declaration. * ppc-linux-nat.c (_initialize_ppc_linux_nat): Add declaration. * ppc-linux-tdep.c (_initialize_ppc_linux_tdep): Add declaration. * ppc-nbsd-nat.c (_initialize_ppcnbsd_nat): Add declaration. * ppc-nbsd-tdep.c (_initialize_ppcnbsd_tdep): Add declaration. * ppc-obsd-nat.c (_initialize_ppcobsd_nat): Add declaration. * ppc-obsd-tdep.c (_initialize_ppcobsd_tdep): Add declaration. * printcmd.c (_initialize_printcmd): Add declaration. * probe.c (_initialize_probe): Add declaration. * proc-api.c (_initialize_proc_api): Add declaration. * proc-events.c (_initialize_proc_events): Add declaration. * proc-service.c (_initialize_proc_service): Add declaration. * procfs.c (_initialize_procfs): Add declaration. * producer.c (_initialize_producer): Add declaration. * psymtab.c (_initialize_psymtab): Add declaration. * python/python.c (_initialize_python): Add declaration. * ravenscar-thread.c (_initialize_ravenscar): Add declaration. * record-btrace.c (_initialize_record_btrace): Add declaration. * record-full.c (_initialize_record_full): Add declaration. * record.c (_initialize_record): Add declaration. * regcache-dump.c (_initialize_regcache_dump): Add declaration. * regcache.c (_initialize_regcache): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * remote-notif.c (_initialize_notif): Add declaration. * remote-sim.c (_initialize_remote_sim): Add declaration. * remote.c (_initialize_remote): Add declaration. * reverse.c (_initialize_reverse): Add declaration. * riscv-fbsd-nat.c (_initialize_riscv_fbsd_nat): Add declaration. * riscv-fbsd-tdep.c (_initialize_riscv_fbsd_tdep): Add declaration. * riscv-linux-nat.c (_initialize_riscv_linux_nat): Add declaration. * riscv-linux-tdep.c (_initialize_riscv_linux_tdep): Add declaration. * riscv-tdep.c (_initialize_riscv_tdep): Add declaration. * rl78-tdep.c (_initialize_rl78_tdep): Add declaration. * rs6000-aix-tdep.c (_initialize_rs6000_aix_tdep): Add declaration. * rs6000-lynx178-tdep.c (_initialize_rs6000_lynx178_tdep): Add declaration. * rs6000-nat.c (_initialize_rs6000_nat): Add declaration. * rs6000-tdep.c (_initialize_rs6000_tdep): Add declaration. * run-on-main-thread.c (_initialize_run_on_main_thread): Add declaration. * rust-exp.y (_initialize_rust_exp): Add declaration. * rx-tdep.c (_initialize_rx_tdep): Add declaration. * s12z-tdep.c (_initialize_s12z_tdep): Add declaration. * s390-linux-nat.c (_initialize_s390_nat): Add declaration. * s390-linux-tdep.c (_initialize_s390_linux_tdep): Add declaration. * s390-tdep.c (_initialize_s390_tdep): Add declaration. * score-tdep.c (_initialize_score_tdep): Add declaration. * ser-go32.c (_initialize_ser_dos): Add declaration. * ser-mingw.c (_initialize_ser_windows): Add declaration. * ser-pipe.c (_initialize_ser_pipe): Add declaration. * ser-tcp.c (_initialize_ser_tcp): Add declaration. * ser-uds.c (_initialize_ser_socket): Add declaration. * ser-unix.c (_initialize_ser_hardwire): Add declaration. * serial.c (_initialize_serial): Add declaration. * sh-linux-tdep.c (_initialize_sh_linux_tdep): Add declaration. * sh-nbsd-nat.c (_initialize_shnbsd_nat): Add declaration. * sh-nbsd-tdep.c (_initialize_shnbsd_tdep): Add declaration. * sh-tdep.c (_initialize_sh_tdep): Add declaration. * skip.c (_initialize_step_skip): Add declaration. * sol-thread.c (_initialize_sol_thread): Add declaration. * solib-aix.c (_initialize_solib_aix): Add declaration. * solib-darwin.c (_initialize_darwin_solib): Add declaration. * solib-dsbt.c (_initialize_dsbt_solib): Add declaration. * solib-frv.c (_initialize_frv_solib): Add declaration. * solib-svr4.c (_initialize_svr4_solib): Add declaration. * solib-target.c (_initialize_solib_target): Add declaration. * solib.c (_initialize_solib): Add declaration. * source-cache.c (_initialize_source_cache): Add declaration. * source.c (_initialize_source): Add declaration. * sparc-linux-nat.c (_initialize_sparc_linux_nat): Add declaration. * sparc-linux-tdep.c (_initialize_sparc_linux_tdep): Add declaration. * sparc-nat.c (_initialize_sparc_nat): Add declaration. * sparc-nbsd-nat.c (_initialize_sparcnbsd_nat): Add declaration. * sparc-nbsd-tdep.c (_initialize_sparcnbsd_tdep): Add declaration. * sparc-obsd-tdep.c (_initialize_sparc32obsd_tdep): Add declaration. * sparc-sol2-tdep.c (_initialize_sparc_sol2_tdep): Add declaration. * sparc-tdep.c (_initialize_sparc_tdep): Add declaration. * sparc64-fbsd-nat.c (_initialize_sparc64fbsd_nat): Add declaration. * sparc64-fbsd-tdep.c (_initialize_sparc64fbsd_tdep): Add declaration. * sparc64-linux-nat.c (_initialize_sparc64_linux_nat): Add declaration. * sparc64-linux-tdep.c (_initialize_sparc64_linux_tdep): Add declaration. * sparc64-nat.c (_initialize_sparc64_nat): Add declaration. * sparc64-nbsd-nat.c (_initialize_sparc64nbsd_nat): Add declaration. * sparc64-nbsd-tdep.c (_initialize_sparc64nbsd_tdep): Add declaration. * sparc64-obsd-nat.c (_initialize_sparc64obsd_nat): Add declaration. * sparc64-obsd-tdep.c (_initialize_sparc64obsd_tdep): Add declaration. * sparc64-sol2-tdep.c (_initialize_sparc64_sol2_tdep): Add declaration. * sparc64-tdep.c (_initialize_sparc64_adi_tdep): Add declaration. * stabsread.c (_initialize_stabsread): Add declaration. * stack.c (_initialize_stack): Add declaration. * stap-probe.c (_initialize_stap_probe): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * symfile-debug.c (_initialize_symfile_debug): Add declaration. * symfile-mem.c (_initialize_symfile_mem): Add declaration. * symfile.c (_initialize_symfile): Add declaration. * symmisc.c (_initialize_symmisc): Add declaration. * symtab.c (_initialize_symtab): Add declaration. * target.c (_initialize_target): Add declaration. * target-connection.c (_initialize_target_connection): Add declaration. * target-dcache.c (_initialize_target_dcache): Add declaration. * target-descriptions.c (_initialize_target_descriptions): Add declaration. * thread.c (_initialize_thread): Add declaration. * tic6x-linux-tdep.c (_initialize_tic6x_linux_tdep): Add declaration. * tic6x-tdep.c (_initialize_tic6x_tdep): Add declaration. * tilegx-linux-nat.c (_initialize_tile_linux_nat): Add declaration. * tilegx-linux-tdep.c (_initialize_tilegx_linux_tdep): Add declaration. * tilegx-tdep.c (_initialize_tilegx_tdep): Add declaration. * tracectf.c (_initialize_ctf): Add declaration. * tracefile-tfile.c (_initialize_tracefile_tfile): Add declaration. * tracefile.c (_initialize_tracefile): Add declaration. * tracepoint.c (_initialize_tracepoint): Add declaration. * tui/tui-hooks.c (_initialize_tui_hooks): Add declaration. * tui/tui-interp.c (_initialize_tui_interp): Add declaration. * tui/tui-layout.c (_initialize_tui_layout): Add declaration. * tui/tui-regs.c (_initialize_tui_regs): Add declaration. * tui/tui-stack.c (_initialize_tui_stack): Add declaration. * tui/tui-win.c (_initialize_tui_win): Add declaration. * tui/tui.c (_initialize_tui): Add declaration. * typeprint.c (_initialize_typeprint): Add declaration. * ui-style.c (_initialize_ui_style): Add declaration. * unittests/array-view-selftests.c (_initialize_array_view_selftests): Add declaration. * unittests/child-path-selftests.c (_initialize_child_path_selftests): Add declaration. * unittests/cli-utils-selftests.c (_initialize_cli_utils_selftests): Add declaration. * unittests/common-utils-selftests.c (_initialize_common_utils_selftests): Add declaration. * unittests/copy_bitwise-selftests.c (_initialize_copy_bitwise_utils_selftests): Add declaration. * unittests/environ-selftests.c (_initialize_environ_selftests): Add declaration. * unittests/filtered_iterator-selftests.c (_initialize_filtered_iterator_selftests): Add declaration. * unittests/format_pieces-selftests.c (_initialize_format_pieces_selftests): Add declaration. * unittests/function-view-selftests.c (_initialize_function_view_selftests): Add declaration. * unittests/help-doc-selftests.c (_initialize_help_doc_selftests): Add declaration. * unittests/lookup_name_info-selftests.c (_initialize_lookup_name_info_selftests): Add declaration. * unittests/main-thread-selftests.c (_initialize_main_thread_selftests): Add declaration. * unittests/memory-map-selftests.c (_initialize_memory_map_selftests): Add declaration. * unittests/memrange-selftests.c (_initialize_memrange_selftests): Add declaration. * unittests/mkdir-recursive-selftests.c (_initialize_mkdir_recursive_selftests): Add declaration. * unittests/observable-selftests.c (_initialize_observer_selftest): Add declaration. * unittests/offset-type-selftests.c (_initialize_offset_type_selftests): Add declaration. * unittests/optional-selftests.c (_initialize_optional_selftests): Add declaration. * unittests/parse-connection-spec-selftests.c (_initialize_parse_connection_spec_selftests): Add declaration. * unittests/rsp-low-selftests.c (_initialize_rsp_low_selftests): Add declaration. * unittests/scoped_fd-selftests.c (_initialize_scoped_fd_selftests): Add declaration. * unittests/scoped_mmap-selftests.c (_initialize_scoped_mmap_selftests): Add declaration. * unittests/scoped_restore-selftests.c (_initialize_scoped_restore_selftests): Add declaration. * unittests/string_view-selftests.c (_initialize_string_view_selftests): Add declaration. * unittests/style-selftests.c (_initialize_style_selftest): Add declaration. * unittests/tracepoint-selftests.c (_initialize_tracepoint_selftests): Add declaration. * unittests/tui-selftests.c (_initialize_tui_selftest): Add declaration. * unittests/unpack-selftests.c (_initialize_unpack_selftests): Add declaration. * unittests/utils-selftests.c (_initialize_utils_selftests): Add declaration. * unittests/vec-utils-selftests.c (_initialize_vec_utils_selftests): Add declaration. * unittests/xml-utils-selftests.c (_initialize_xml_utils): Add declaration. * user-regs.c (_initialize_user_regs): Add declaration. * utils.c (_initialize_utils): Add declaration. * v850-tdep.c (_initialize_v850_tdep): Add declaration. * valops.c (_initialize_valops): Add declaration. * valprint.c (_initialize_valprint): Add declaration. * value.c (_initialize_values): Add declaration. * varobj.c (_initialize_varobj): Add declaration. * vax-bsd-nat.c (_initialize_vaxbsd_nat): Add declaration. * vax-nbsd-tdep.c (_initialize_vaxnbsd_tdep): Add declaration. * vax-tdep.c (_initialize_vax_tdep): Add declaration. * windows-nat.c (_initialize_windows_nat): Add declaration. (_initialize_check_for_gdb_ini): Add declaration. (_initialize_loadable): Add declaration. * windows-tdep.c (_initialize_windows_tdep): Add declaration. * x86-bsd-nat.c (_initialize_x86_bsd_nat): Add declaration. * x86-linux-nat.c (_initialize_x86_linux_nat): Add declaration. * xcoffread.c (_initialize_xcoffread): Add declaration. * xml-support.c (_initialize_xml_support): Add declaration. * xstormy16-tdep.c (_initialize_xstormy16_tdep): Add declaration. * xtensa-linux-nat.c (_initialize_xtensa_linux_nat): Add declaration. * xtensa-linux-tdep.c (_initialize_xtensa_linux_tdep): Add declaration. * xtensa-tdep.c (_initialize_xtensa_tdep): Add declaration. Change-Id: I13eec7e0ed2b3c427377a7bdb055cf46da64def9	2020-01-13 14:01:38 -05:00
Pedro Alves	5b6d1e4fa4	Multi-target support ... This commit adds multi-target support to GDB. What this means is that with this commit, GDB can now be connected to different targets at the same time. E.g., you can debug a live native process and a core dump at the same time, connect to multiple gdbservers, etc. Actually, the word "target" is overloaded in gdb. We already have a target stack, with pushes several target_ops instances on top of one another. We also have "info target" already, which means something completely different to what this patch does. So from here on, I'll be using the "target connections" term, to mean an open process_stratum target, pushed on a target stack. This patch makes gdb have multiple target stacks, and multiple process_stratum targets open simultaneously. The user-visible changes / commands will also use this terminology, but of course it's all open to debate. User-interface-wise, not that much changes. The main difference is that each inferior may have its own target connection. A target connection (e.g., a target extended-remote connection) may support debugging multiple processes, just as before. Say you're debugging against gdbserver in extended-remote mode, and you do "add-inferior" to prepare to spawn a new process, like: (gdb) target extended-remote :9999 ... (gdb) start ... (gdb) add-inferior Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) file a.out ... (gdb) start ... At this point, you have two inferiors connected to the same gdbserver. With this commit, GDB will maintain a target stack per inferior, instead of a global target stack. To preserve the behavior above, by default, "add-inferior" makes the new inferior inherit a copy of the target stack of the current inferior. Same across a fork - the child inherits a copy of the target stack of the parent. While the target stacks are copied, the targets themselves are not. Instead, target_ops is made a refcounted_object, which means that target_ops instances are refcounted, which each inferior counting for a reference. What if you want to create an inferior and connect it to some _other_ target? For that, this commit introduces a new "add-inferior -no-connection" option that makes the new inferior not share the current inferior's target. So you could do: (gdb) target extended-remote :9999 Remote debugging using :9999 ... (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 <null> (gdb) tar extended-remote :10000 Remote debugging using :10000 ... (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 process 18450 target:/home/pedro/tmp/main (gdb) A following patch will extended "info inferiors" to include a column indicating which connection an inferior is bound to, along with a couple other UI tweaks. Other than that, debugging is the same as before. Users interact with inferiors and threads as before. The only difference is that inferiors may be bound to processes running in different machines. That's pretty much all there is to it in terms of noticeable UI changes. On to implementation. Since we can be connected to different systems at the same time, a ptid_t is no longer a unique identifier. Instead a thread can be identified by a pair of ptid_t and 'process_stratum_target *', the later being the instance of the process_stratum target that owns the process/thread. Note that process_stratum_target inherits from target_ops, and all process_stratum targets inherit from process_stratum_target. In earlier patches, many places in gdb were converted to refer to threads by thread_info pointer instead of ptid_t, but there are still places in gdb where we start with a pid/tid and need to find the corresponding inferior or thread_info objects. So you'll see in the patch many places adding a process_stratum_target parameter to functions that used to take only a ptid_t. Since each inferior has its own target stack now, we can always find the process_stratum target for an inferior. That is done via a inf->process_target() convenience method. Since each inferior has its own target stack, we need to handle the "beneath" calls when servicing target calls. The solution I settled with is just to make sure to switch the current inferior to the inferior you want before making a target call. Not relying on global context is just not feasible in current GDB. Fortunately, there aren't that many places that need to do that, because generally most code that calls target methods already has the current context pointing to the right inferior/thread. Note, to emphasize -- there's no method to "switch to this target stack". Instead, you switch the current inferior, and that implicitly switches the target stack. In some spots, we need to iterate over all inferiors so that we reach all target stacks. Native targets are still singletons. There's always only a single instance of such targets. Remote targets however, we'll have one instance per remote connection. The exec target is still a singleton. There's only one instance. I did not see the point of instanciating more than one exec_target object. After vfork, we need to make sure to push the exec target on the new inferior. See exec_on_vfork. For type safety, functions that need a {target, ptid} pair to identify a thread, take a process_stratum_target pointer for target parameter instead of target_ops *. Some shared code in gdb/nat/ also need to gain a target pointer parameter. This poses an issue, since gdbserver doesn't have process_stratum_target, only target_ops. To fix this, this commit renames gdbserver's target_ops to process_stratum_target. I think this makes sense. There's no concept of target stack in gdbserver, and gdbserver's target_ops really implements a process_stratum-like target. The thread and inferior iterator functions also gain process_stratum_target parameters. These are used to be able to iterate over threads and inferiors of a given target. Following usual conventions, if the target pointer is null, then we iterate over threads and inferiors of all targets. I tried converting "add-inferior" to the gdb::option framework, as a preparatory patch, but that stumbled on the fact that gdb::option does not support file options yet, for "add-inferior -exec". I have a WIP patchset that adds that, but it's not a trivial patch, mainly due to need to integrate readline's filename completion, so I deferred that to some other time. In infrun.c/infcmd.c, the main change is that we need to poll events out of all targets. See do_target_wait. Right after collecting an event, we switch the current inferior to an inferior bound to the target that reported the event, so that target methods can be used while handling the event. This makes most of the code transparent to multi-targets. See fetch_inferior_event. infrun.c:stop_all_threads is interesting -- in this function we need to stop all threads of all targets. What the function does is send an asynchronous stop request to all threads, and then synchronously waits for events, with target_wait, rinse repeat, until all it finds are stopped threads. Now that we have multiple targets, it's not efficient to synchronously block in target_wait waiting for events out of one target. Instead, we implement a mini event loop, with interruptible_select, select'ing on one file descriptor per target. For this to work, we need to be able to ask the target for a waitable file descriptor. Such file descriptors already exist, they are the descriptors registered in the main event loop with add_file_handler, inside the target_async implementations. This commit adds a new target_async_wait_fd target method that just returns the file descriptor in question. See wait_one / stop_all_threads in infrun.c. The 'threads_executing' global is made a per-target variable. Since it is only relevant to process_stratum_target targets, this is where it is put, instead of in target_ops. You'll notice that remote.c includes some FIXME notes. These refer to the fact that the global arrays that hold data for the remote packets supported are still globals. For example, if we connect to two different servers/stubs, then each might support different remote protocol features. They might even be different architectures, like e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a host/controller scenario as a single program. That isn't going to work correctly today, because of said globals. I'm leaving fixing that for another pass, since it does not appear to be trivial, and I'd rather land the base work first. It's already useful to be able to debug multiple instances of the same server (e.g., a distributed cluster, where you have full control over the servers installed), so I think as is it's already reasonable incremental progress. Current limitations: - You can only resume more that one target at the same time if all targets support asynchronous debugging, and support non-stop mode. It should be possible to support mixed all-stop + non-stop backends, but that is left for another time. This means that currently in order to do multi-target with gdbserver you need to issue "maint set target-non-stop on". I would like to make that mode be the default, but we're not there yet. Note that I'm talking about how the target backend works, only. User-visible all-stop mode works just fine. - As explained above, connecting to different remote servers at the same time is likely to produce bad results if they don't support the exact set of RSP features. FreeBSD updates courtesy of John Baldwin. gdb/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> John Baldwin <jhb@FreeBSD.org> * aarch64-linux-nat.c (aarch64_linux_nat_target::thread_architecture): Adjust. * ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call. (task_command_1): Likewise. * aix-thread.c (sync_threadlists, aix_thread_target::resume) (aix_thread_target::wait, aix_thread_target::fetch_registers) (aix_thread_target::store_registers) (aix_thread_target::thread_alive): Adjust. * amd64-fbsd-tdep.c: Include "inferior.h". (amd64fbsd_get_thread_local_address): Pass down target. * amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle thread's gdbarch instead of target_gdbarch. * break-catch-sig.c (signal_catchpoint_print_it): Adjust call to get_last_target_status. * break-catch-syscall.c (print_it_catch_syscall): Likewise. * breakpoint.c (breakpoints_should_be_inserted_now): Consider all inferiors. (update_inserted_breakpoint_locations): Skip if inferiors with no execution. (update_global_location_list): When handling moribund locations, find representative inferior for location's pspace, and use thread count of its process_stratum target. * bsd-kvm.c (bsd_kvm_target_open): Pass target down. * bsd-uthread.c (bsd_uthread_target::wait): Use as_process_stratum_target and adjust thread_change_ptid and add_thread calls. (bsd_uthread_target::update_thread_list): Use as_process_stratum_target and adjust find_thread_ptid, thread_change_ptid and add_thread calls. * btrace.c (maint_btrace_packet_history_cmd): Adjust find_thread_ptid call. * corelow.c (add_to_thread_list): Adjust add_thread call. (core_target_open): Adjust add_thread_silent and thread_count calls. (core_target::pid_to_str): Adjust find_inferior_ptid call. * ctf.c (ctf_target_open): Adjust add_thread_silent call. * event-top.c (async_disconnect): Pop targets from all inferiors. * exec.c (add_target_sections): Push exec target on all inferiors sharing the program space. (remove_target_sections): Remove the exec target from all inferiors sharing the program space. (exec_on_vfork): New. * exec.h (exec_on_vfork): Declare. * fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::update_thread_list): Adjust. (fbsd_nat_target::resume): Adjust. (fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust. * fbsd-tdep.c (fbsd_corefile_thread): Adjust get_thread_arch_regcache call. * fork-child.c (gdb_startup_inferior): Pass target down to startup_inferior and set_executing. * gdbthread.h (struct process_stratum_target): Forward declare. (add_thread, add_thread_silent, add_thread_with_info) (in_thread_list): Add process_stratum_target parameter. (find_thread_ptid(inferior*, ptid_t)): New overload. (find_thread_ptid, thread_change_ptid): Add process_stratum_target parameter. (all_threads()): Delete overload. (all_threads, all_non_exited_threads): Add process_stratum_target parameter. (all_threads_safe): Use brace initialization. (thread_count): Add process_stratum_target parameter. (set_resumed, set_running, set_stop_requested, set_executing) (threads_are_executing, finish_thread_state): Add process_stratum_target parameter. (switch_to_thread): Use is_current_thread. * i386-fbsd-tdep.c: Include "inferior.h". (i386fbsd_get_thread_local_address): Pass down target. * i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust. * inf-child.c (inf_child_target::maybe_unpush_target): Remove have_inferiors check. * inf-ptrace.c (inf_ptrace_target::create_inferior) (inf_ptrace_target::attach): Adjust. * infcall.c (run_inferior_call): Adjust. * infcmd.c (run_command_1): Pass target to scoped_finish_thread_state. (proceed_thread_callback): Skip inferiors with no execution. (continue_command): Rename 'all_threads' local to avoid hiding 'all_threads' function. Adjust get_last_target_status call. (prepare_one_step): Adjust set_running call. (signal_command): Use user_visible_resume_target. Compare thread pointers instead of inferior_ptid. (info_program_command): Adjust to pass down target. (attach_command): Mark target's 'thread_executing' flag. (stop_current_target_threads_ns): New, factored out from ... (interrupt_target_1): ... this. Switch inferior before making target calls. * inferior-iter.h (struct all_inferiors_iterator, struct all_inferiors_range) (struct all_inferiors_safe_range) (struct all_non_exited_inferiors_range): Filter on process_stratum_target too. Remove explicit. * inferior.c (inferior::inferior): Push dummy target on target stack. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors): Add process_stratum_target parameter, and pass it down. (have_live_inferiors): Adjust. (switch_to_inferior_and_push_target): New. (add_inferior_command, clone_inferior_command): Handle "-no-connection" parameter. Use switch_to_inferior_and_push_target. (_initialize_inferior): Mention "-no-connection" option in the help of "add-inferior" and "clone-inferior" commands. * inferior.h: Include "process-stratum-target.h". (interrupt_target_1): Use bool. (struct inferior) <push_target, unpush_target, target_is_pushed, find_target_beneath, top_target, process_target, target_at, m_stack>: New. (discard_all_inferiors): Delete. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors) (all_inferiors, all_non_exited_inferiors): Add process_stratum_target parameter. * infrun.c: Include "gdb_select.h" and <unordered_map>. (target_last_proc_target): New global. (follow_fork_inferior): Push target on new inferior. Pass target to add_thread_silent. Call exec_on_vfork. Handle target's reference count. (follow_fork): Adjust get_last_target_status call. Also consider target. (follow_exec): Push target on new inferior. (struct execution_control_state) <target>: New field. (user_visible_resume_target): New. (do_target_resume): Call target_async. (resume_1): Set target's threads_executing flag. Consider resume target. (commit_resume_all_targets): New. (proceed): Also consider resume target. Skip threads of inferiors with no execution. Commit resumtion in all targets. (start_remote): Pass current inferior to wait_for_inferior. (infrun_thread_stop_requested): Consider target as well. Pass thread_info pointer to clear_inline_frame_state instead of ptid. (infrun_thread_thread_exit): Consider target as well. (random_pending_event_thread): New inferior parameter. Use it. (do_target_wait): Rename to ... (do_target_wait_1): ... this. Add inferior parameter, and pass it down. (threads_are_resumed_pending_p, do_target_wait): New. (prepare_for_detach): Adjust calls. (wait_for_inferior): New inferior parameter. Handle it. Use do_target_wait_1 instead of do_target_wait. (fetch_inferior_event): Adjust. Switch to representative inferior. Pass target down. (set_last_target_status): Add process_stratum_target parameter. Save target in global. (get_last_target_status): Add process_stratum_target parameter and handle it. (nullify_last_target_wait_ptid): Clear 'target_last_proc_target'. (context_switch): Check inferior_ptid == null_ptid before calling inferior_thread(). (get_inferior_stop_soon): Pass down target. (wait_one): Rename to ... (poll_one_curr_target): ... this. (struct wait_one_event): New. (wait_one): New. (stop_all_threads): Adjust. (handle_no_resumed, handle_inferior_event): Adjust to consider the event's target. (switch_back_to_stepped_thread): Also consider target. (print_stop_event): Update. (normal_stop): Update. Also consider the resume target. * infrun.h (wait_for_inferior): Remove declaration. (user_visible_resume_target): New declaration. (get_last_target_status, set_last_target_status): New process_stratum_target parameter. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter, and use it. (clear_inline_frame_state (thread_info*)): New. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter. (clear_inline_frame_state (thread_info*)): Declare. * linux-fork.c (delete_checkpoint_command): Pass target down to find_thread_ptid. (checkpoint_command): Adjust. * linux-nat.c (linux_nat_target::follow_fork): Switch to thread instead of just tweaking inferior_ptid. (linux_nat_switch_fork): Pass target down to thread_change_ptid. (exit_lwp): Pass target down to find_thread_ptid. (attach_proc_task_lwp_callback): Pass target down to add_thread/set_running/set_executing. (linux_nat_target::attach): Pass target down to thread_change_ptid. (get_detach_signal): Pass target down to find_thread_ptid. Consider last target status's target. (linux_resume_one_lwp_throw, resume_lwp) (linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp) (stop_wait_callback, save_stop_reason, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down. (linux_nat_target::async_wait_fd): New. (linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass target down. * linux-nat.h (linux_nat_target::async_wait_fd): Declare. * linux-tdep.c (get_thread_arch_regcache): Pass target down. * linux-thread-db.c (struct thread_db_info::process_target): New field. (add_thread_db_info): Save target. (get_thread_db_info): New process_stratum_target parameter. Also match target. (delete_thread_db_info): New process_stratum_target parameter. Also match target. (thread_from_lwp): Adjust to pass down target. (thread_db_notice_clone): Pass down target. (check_thread_db_callback): Pass down target. (try_thread_db_load_1): Always push the thread_db target. (try_thread_db_load, record_thread): Pass target down. (thread_db_target::detach): Pass target down. Always unpush the thread_db target. (thread_db_target::wait, thread_db_target::mourn_inferior): Pass target down. Always unpush the thread_db target. (find_new_threads_callback, thread_db_find_new_threads_2) (thread_db_target::update_thread_list): Pass target down. (thread_db_target::pid_to_str): Pass current inferior down. (thread_db_target::get_thread_local_address): Pass target down. (thread_db_target::resume, maintenance_check_libthread_db): Pass target down. * nto-procfs.c (nto_procfs_target::update_thread_list): Adjust. * procfs.c (procfs_target::procfs_init_inferior): Declare. (proc_set_current_signal, do_attach, procfs_target::wait): Adjust. (procfs_init_inferior): Rename to ... (procfs_target::procfs_init_inferior): ... this and adjust. (procfs_target::create_inferior, procfs_notice_thread) (procfs_do_thread_registers): Adjust. * ppc-fbsd-tdep.c: Include "inferior.h". (ppcfbsd_get_thread_local_address): Pass down target. * proc-service.c (ps_xfer_memory): Switch current inferior and program space as well. (get_ps_regcache): Pass target down. * process-stratum-target.c (process_stratum_target::thread_address_space) (process_stratum_target::thread_architecture): Pass target down. * process-stratum-target.h (process_stratum_target::threads_executing): New field. (as_process_stratum_target): New. * ravenscar-thread.c (ravenscar_thread_target::update_inferior_ptid): Pass target down. (ravenscar_thread_target::wait, ravenscar_add_thread): Pass target down. * record-btrace.c (record_btrace_target::info_record): Adjust. (record_btrace_target::record_method) (record_btrace_target::record_is_replaying) (record_btrace_target::fetch_registers) (get_thread_current_frame_id, record_btrace_target::resume) (record_btrace_target::wait, record_btrace_target::stop): Pass target down. * record-full.c (record_full_wait_1): Switch to event thread. Pass target down. * regcache.c (regcache::regcache) (get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add process_stratum_target parameter and handle it. (current_thread_target): New global. (get_thread_regcache): Add process_stratum_target parameter and handle it. Switch inferior before calling target method. (get_thread_regcache): Pass target down. (get_thread_regcache_for_ptid): Pass target down. (registers_changed_ptid): Add process_stratum_target parameter and handle it. (registers_changed_thread, registers_changed): Pass target down. (test_get_thread_arch_aspace_regcache): New. (current_regcache_test): Define a couple local test_target_ops instances and use them for testing. (readwrite_regcache): Pass process_stratum_target parameter. (cooked_read_test, cooked_write_test): Pass mock_target down. * regcache.h (get_thread_regcache, get_thread_arch_regcache) (get_thread_arch_aspace_regcache): Add process_stratum_target parameter. (regcache::target): New method. (regcache::regcache, regcache::get_thread_arch_aspace_regcache) (regcache::registers_changed_ptid): Add process_stratum_target parameter. (regcache::m_target): New field. (registers_changed_ptid): Add process_stratum_target parameter. * remote.c (remote_state::supports_vCont_probed): New field. (remote_target::async_wait_fd): New method. (remote_unpush_and_throw): Add remote_target parameter. (get_current_remote_target): Adjust. (remote_target::remote_add_inferior): Push target. (remote_target::remote_add_thread) (remote_target::remote_notice_new_inferior) (get_remote_thread_info): Pass target down. (remote_target::update_thread_list): Skip threads of inferiors bound to other targets. (remote_target::close): Don't discard inferiors. (remote_target::add_current_inferior_and_thread) (remote_target::process_initial_stop_replies) (remote_target::start_remote) (remote_target::remote_serial_quit_handler): Pass down target. (remote_target::remote_unpush_target): New remote_target parameter. Unpush the target from all inferiors. (remote_target::remote_unpush_and_throw): New remote_target parameter. Pass it down. (remote_target::open_1): Check whether the current inferior has execution instead of checking whether any inferior is live. Pass target down. (remote_target::remote_detach_1): Pass down target. Use remote_unpush_target. (extended_remote_target::attach): Pass down target. (remote_target::remote_vcont_probe): Set supports_vCont_probed. (remote_target::append_resumption): Pass down target. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc, remote_target::resume) (remote_target::commit_resume): Pass down target. (remote_target::remote_stop_ns): Check supports_vCont_probed. (remote_target::interrupt_query) (remote_target::remove_new_fork_children) (remote_target::check_pending_events_prevent_wildcard_vcont) (remote_target::remote_parse_stop_reply) (remote_target::process_stop_reply): Pass down target. (first_remote_resumed_thread): New remote_target parameter. Pass it down. (remote_target::wait_as): Pass down target. (unpush_and_perror): New remote_target parameter. Pass it down. (remote_target::readchar, remote_target::remote_serial_write) (remote_target::getpkt_or_notif_sane_1) (remote_target::kill_new_fork_children, remote_target::kill): Pass down target. (remote_target::mourn_inferior): Pass down target. Use remote_unpush_target. (remote_target::core_of_thread) (remote_target::remote_btrace_maybe_reopen): Pass down target. (remote_target::pid_to_exec_file) (remote_target::thread_handle_to_thread_info): Pass down target. (remote_target::async_wait_fd): New. * riscv-fbsd-tdep.c: Include "inferior.h". (riscv_fbsd_get_thread_local_address): Pass down target. * sol2-tdep.c (sol2_core_pid_to_str): Pass down target. * sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs) (ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback): Adjust. * solib-spu.c (spu_skip_standalone_loader): Pass down target. * solib-svr4.c (enable_break): Pass down target. * spu-multiarch.c (parse_spufs_run): Pass down target. * spu-tdep.c (spu2ppu_sniffer): Pass down target. * target-delegates.c: Regenerate. * target.c (g_target_stack): Delete. (current_top_target): Return the current inferior's top target. (target_has_execution_1): Refer to the passed-in inferior's top target. (target_supports_terminal_ours): Check whether the initial inferior was already created. (decref_target): New. (target_stack::push): Incref/decref the target. (push_target, push_target, unpush_target): Adjust. (target_stack::unpush): Defref target. (target_is_pushed): Return bool. Adjust to refer to the current inferior's target stack. (dispose_inferior): Delete, and inline parts ... (target_preopen): ... here. Only dispose of the current inferior. (target_detach): Hold strong target reference while detaching. Pass target down. (target_thread_name): Add assertion. (target_resume): Pass down target. (target_ops::beneath, find_target_at): Adjust to refer to the current inferior's target stack. (get_dummy_target): New. (target_pass_ctrlc): Pass the Ctrl-C to the first inferior that has a thread running. (initialize_targets): Rename to ... (_initialize_target): ... this. * target.h: Include "gdbsupport/refcounted-object.h". (struct target_ops): Inherit refcounted_object. (target_ops::shortname, target_ops::longname): Make const. (target_ops::async_wait_fd): New method. (decref_target): Declare. (struct target_ops_ref_policy): New. (target_ops_ref): New typedef. (get_dummy_target): Declare function. (target_is_pushed): Return bool. * thread-iter.c (all_matching_threads_iterator::m_inf_matches) (all_matching_threads_iterator::all_matching_threads_iterator): Handle filter target. * thread-iter.h (struct all_matching_threads_iterator, struct all_matching_threads_range, class all_non_exited_threads_range): Filter by target too. Remove explicit. * thread.c (threads_executing): Delete. (inferior_thread): Pass down current inferior. (clear_thread_inferior_resources): Pass down thread pointer instead of ptid_t. (add_thread_silent, add_thread_with_info, add_thread): Add process_stratum_target parameter. Use it for thread and inferior searches. (is_current_thread): New. (thread_info::deletable): Use it. (find_thread_ptid, thread_count, in_thread_list) (thread_change_ptid, set_resumed, set_running): New process_stratum_target parameter. Pass it down. (set_executing): New process_stratum_target parameter. Pass it down. Adjust reference to 'threads_executing'. (threads_are_executing): New process_stratum_target parameter. Adjust reference to 'threads_executing'. (set_stop_requested, finish_thread_state): New process_stratum_target parameter. Pass it down. (switch_to_thread): Also match inferior. (switch_to_thread): New process_stratum_target parameter. Pass it down. (update_threads_executing): Reimplement. * top.c (quit_force): Pop targets from all inferior. (gdb_init): Don't call initialize_targets. * windows-nat.c (windows_nat_target) <get_windows_debug_event>: Declare. (windows_add_thread, windows_delete_thread): Adjust. (get_windows_debug_event): Rename to ... (windows_nat_target::get_windows_debug_event): ... this. Adjust. * tracefile-tfile.c (tfile_target_open): Pass down target. * gdbsupport/common-gdbthread.h (struct process_stratum_target): Forward declare. (switch_to_thread): Add process_stratum_target parameter. * mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target parameter. Use it. (mi_on_resume): Pass target down. * nat/fork-inferior.c (startup_inferior): Add process_stratum_target parameter. Pass it down. * nat/fork-inferior.h (startup_inferior): Add process_stratum_target parameter. * python/py-threadevent.c (py_get_event_thread): Pass target down. gdb/gdbserver/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> * fork-child.c (post_fork_inferior): Pass target down to startup_inferior. * inferiors.c (switch_to_thread): Add process_stratum_target parameter. * lynx-low.c (lynx_target_ops): Now a process_stratum_target. * nto-low.c (nto_target_ops): Now a process_stratum_target. * linux-low.c (linux_target_ops): Now a process_stratum_target. * remote-utils.c (prepare_resume_reply): Pass the target to switch_to_thread. * target.c (the_target): Now a process_stratum_target. (done_accessing_memory): Pass the target to switch_to_thread. (set_target_ops): Ajust to use process_stratum_target. * target.h (struct target_ops): Rename to ... (struct process_stratum_target): ... this. (the_target, set_target_ops): Adjust. (prepare_to_access_memory): Adjust comment. * win32-low.c (child_xfer_memory): Adjust to use process_stratum_target. (win32_target_ops): Now a process_stratum_target.	2020-01-10 20:06:08 +00:00
Joel Brobecker	b811d2c292	Update copyright year range in all GDB files. ... gdb/ChangeLog: Update copyright year range in all GDB files.	2020-01-01 10:20:53 +04:00
Christian Biesinger	aa989b27d0	Rename "sun" variable to avoid conflicts on Solaris ... A Solaris system header has a #define for "sun". This renames that variable to avoid the conflict, fixing a build error with --enable-targets=all on Solaris. gdb/ChangeLog: 2019-12-19 Christian Biesinger <cbiesinger@google.com> * fbsd-tdep.c (fbsd_info_proc_files_entry): Rename local var "sun" to "saddr_un". Change-Id: I07a5cd801db1e28ccab8a473ebad74d7afe017c2	2019-12-19 13:02:39 -06:00
Tom Tromey	aac4760f70	Fix the build after bfd_get_signed_8 change ... A recent commit changed bfd_get_signed_8 to extend the result to a bfd_signed_vma. This caused a compiler error in one spot in my --enable-targets=all gdb build, where the result of bfd_get_signed_8 was passed to printf. This patch fixes the build. Tested by rebuilding. gdb/ChangeLog 2019-12-11 Tom Tromey <tromey@adacore.com> * fbsd-tdep.c (fbsd_core_info_proc_status): Cast result of bfd_get_signed_8. Change-Id: Ic015f5fd3d88da6b5da8f7b4e1d11d5c981333db	2019-12-11 07:58:46 -07:00
Tom de Vries	85102364b2	[gdb] Fix more typos in comments ... Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4	2019-10-18 02:48:08 +02:00
Alan Modra	fd3619828e	bfd_section_* macros ... This large patch removes the unnecessary bfd parameter from various bfd section macros and functions. The bfd is hardly ever used and if needed for the bfd_set_section_* or bfd_rename_section functions can be found via section->owner except for the com, und, abs, and ind std_section special sections. Those sections shouldn't be modified anyway. The patch also removes various bfd_get_section_<field> macros, replacing their use with bfd_section_<field>, and adds bfd_set_section_lma. I've also fixed a minor bug in gas where compressed section renaming was done directly rather than calling bfd_rename_section. This would have broken bfd_get_section_by_name and similar functions, but that hardly mattered at such a late stage in gas processing. bfd/ * bfd-in.h (bfd_get_section_name, bfd_get_section_vma), (bfd_get_section_lma, bfd_get_section_alignment), (bfd_get_section_size, bfd_get_section_flags), (bfd_get_section_userdata): Delete. (bfd_section_name, bfd_section_size, bfd_section_vma), (bfd_section_lma, bfd_section_alignment): Lose bfd parameter. (bfd_section_flags, bfd_section_userdata): New. (bfd_is_com_section): Rename parameter. * section.c (bfd_set_section_userdata, bfd_set_section_vma), (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section), (bfd_set_section_size): Delete bfd parameter, rename section parameter. (bfd_set_section_lma): New. * bfd-in2.h: Regenerate. * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param, update callers. * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c, * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c, * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h, * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c, * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c, * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c, * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c, * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c, * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c, * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c, * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c, * xcofflink.c: Update throughout for bfd section macro and function changes. binutils/ * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c, * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c, * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c, * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update throughout for bfd section macro and function changes. gas/ * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c, * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c, * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c, * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c, * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c, * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c, * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c, * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c, * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c, * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c, * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c, * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c, * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c, * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c, * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c, * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c, * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c, * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c, * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c, * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c, * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c, * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c, * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for bfd section macro and function changes. * write.c (compress_debug): Use bfd_rename_section. gdb/ * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c, * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c, * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c, * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h, * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c, * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c, * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c, * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c, * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c, * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c, * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c, * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c, * solib-spu.c, * solib-svr4.c, * solib-target.c, * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c, * symmisc.c, * symtab.c, * target.c, * windows-nat.c, * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c, * mi/mi-interp.c: Update throughout for bfd section macro and function changes. * gcore (gcore_create_callback): Use bfd_set_section_lma. * spu-tdep.c (spu_overlay_new_objfile): Likewise. gprof/ * corefile.c, * symtab.c: Update throughout for bfd section macro and function changes. ld/ * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c, * emultempl/aarch64elf.em, * emultempl/aix.em, * emultempl/armcoff.em, * emultempl/armelf.em, * emultempl/cr16elf.em, * emultempl/cskyelf.em, * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em, * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em, * emultempl/mmo.em, * emultempl/msp430.em, * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em, * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update throughout for bfd section macro and function changes. libctf/ * ctf-open-bfd.c: Update throughout for bfd section macro changes. opcodes/ * arc-ext.c: Update throughout for bfd section macro changes. sim/ * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c, * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c, * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c, * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c, * rx/trace.c: Update throughout for bfd section macro changes.	2019-09-19 09:40:13 +09:30
Pedro Alves	b02f78f928	Introduce and use make_unique_xstrdup ... Adds an utility function to make it shorter to write the common case of wrapping an xstrdup with a unique_xmalloc_ptr, and uses it throughout. Note: I tried to put this in common/common-utils.h near skip_spaces, etc. but that is included in common/common-defs.h before common/gdb_unique_ptr.h is included, so it would fail to compile because gdb::unique_xmalloc_ptr isn't defined at that point yet. I tried moving the gdb_unique_ptr.h inclusion before common-utils.h, but that doesn't work because gdb_unique_ptr.h depends on common-utils.h for xfree. gdb/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * common/gdb_unique_ptr.h (make_unique_xstrdup): New. * ada-lang.c (catch_ada_completer): Use make_unique_xstrdup. * breakpoint.c (condition_completer): Likewise. * cli/cli-dump.c (scan_expression): Likewise. * common/filestuff.c (mkdir_recursive): Likewise. * common/gdb_tilde_expand.c (gdb_tilde_expand_up) * common/pathstuff.c (gdb_realpath, gdb_realpath_keepfile) (gdb_abspath): Likewise. * compile/compile-cplus-types.c (compile_cplus_instance::decl_name): Likewise. * completer.c (complete_explicit_location): (signal_completer, reg_or_group_completer_1): Likewise. * cp-support.c (cp_remove_params_if_any): Likewise. * fbsd-tdep.c (fbsd_core_vnode_path): Likewise. * guile/scm-safe-call.c (gdbscm_safe_eval_string): Likewise. * infcmd.c (strip_bg_char): Likewise. * linespec.c (copy_token_string): Likewise. * mi/mi-main.c (output_cores): Likewise. * psymtab.c (psymtab_search_name): * symfile.c (test_set_ext_lang_command): Likewise. * target.c (target_fileio_read_stralloc): Likewise. * tui/tui-regs.c (tui_reggroup_completer): Likewise. * value.c (complete_internalvar): Likewise. gdb/gdbserver/ChangeLog: 2019-06-04 Pedro Alves <palves@redhat.com> * server.c (captured_main): Use make_unique_xstrdup.	2019-06-04 22:48:32 +01:00
Tom Tromey	d4e05d2fea	Convert fbsd-tdep.c to type-safe registry API ... This changes fbsd-tdep.c to use the type-safe registry API. gdb/ChangeLog 2019-05-08 Tom Tromey <tom@tromey.com> * fbsd-tdep.c (struct fbsd_pspace_data): Add initializers. (fbsd_pspace_data_handle): Move lower. Change type. (get_fbsd_pspace_data): Update. (fbsd_pspace_data_cleanup): Remove. (_initialize_fbsd_tdep): Update.	2019-05-08 16:01:52 -06:00
Tom Tromey	230d2906b9	Rename gdb exception types ... This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.	2019-04-08 09:05:40 -06:00
Tom Tromey	a70b814420	Rewrite TRY/CATCH ... This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.	2019-04-08 09:05:39 -06:00
Tom Tromey	4de283e4b5	Revert the header-sorting patch ... Andreas Schwab and John Baldwin pointed out some bugs in the header sorting patch; and I noticed that the output was not correct when limited to a subset of files (a bug in my script). So, I'm reverting the patch. I may try again after fixing the issues pointed out. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> Revert the header-sorting patch. * ft32-tdep.c: Revert. * frv-tdep.c: Revert. * frv-linux-tdep.c: Revert. * frame.c: Revert. * frame-unwind.c: Revert. * frame-base.c: Revert. * fork-child.c: Revert. * findvar.c: Revert. * findcmd.c: Revert. * filesystem.c: Revert. * filename-seen-cache.h: Revert. * filename-seen-cache.c: Revert. * fbsd-tdep.c: Revert. * fbsd-nat.h: Revert. * fbsd-nat.c: Revert. * f-valprint.c: Revert. * f-typeprint.c: Revert. * f-lang.c: Revert. * extension.h: Revert. * extension.c: Revert. * extension-priv.h: Revert. * expprint.c: Revert. * exec.h: Revert. * exec.c: Revert. * exceptions.c: Revert. * event-top.c: Revert. * event-loop.c: Revert. * eval.c: Revert. * elfread.c: Revert. * dwarf2read.h: Revert. * dwarf2read.c: Revert. * dwarf2loc.c: Revert. * dwarf2expr.h: Revert. * dwarf2expr.c: Revert. * dwarf2-frame.c: Revert. * dwarf2-frame-tailcall.c: Revert. * dwarf-index-write.h: Revert. * dwarf-index-write.c: Revert. * dwarf-index-common.c: Revert. * dwarf-index-cache.h: Revert. * dwarf-index-cache.c: Revert. * dummy-frame.c: Revert. * dtrace-probe.c: Revert. * disasm.h: Revert. * disasm.c: Revert. * disasm-selftests.c: Revert. * dictionary.c: Revert. * dicos-tdep.c: Revert. * demangle.c: Revert. * dcache.h: Revert. * dcache.c: Revert. * darwin-nat.h: Revert. * darwin-nat.c: Revert. * darwin-nat-info.c: Revert. * d-valprint.c: Revert. * d-namespace.c: Revert. * d-lang.c: Revert. * ctf.c: Revert. * csky-tdep.c: Revert. * csky-linux-tdep.c: Revert. * cris-tdep.c: Revert. * cris-linux-tdep.c: Revert. * cp-valprint.c: Revert. * cp-support.c: Revert. * cp-namespace.c: Revert. * cp-abi.c: Revert. * corelow.c: Revert. * corefile.c: Revert. * continuations.c: Revert. * completer.h: Revert. * completer.c: Revert. * complaints.c: Revert. * coffread.c: Revert. * coff-pe-read.c: Revert. * cli-out.h: Revert. * cli-out.c: Revert. * charset.c: Revert. * c-varobj.c: Revert. * c-valprint.c: Revert. * c-typeprint.c: Revert. * c-lang.c: Revert. * buildsym.c: Revert. * buildsym-legacy.c: Revert. * build-id.h: Revert. * build-id.c: Revert. * btrace.c: Revert. * bsd-uthread.c: Revert. * breakpoint.h: Revert. * breakpoint.c: Revert. * break-catch-throw.c: Revert. * break-catch-syscall.c: Revert. * break-catch-sig.c: Revert. * blockframe.c: Revert. * block.c: Revert. * bfin-tdep.c: Revert. * bfin-linux-tdep.c: Revert. * bfd-target.c: Revert. * bcache.c: Revert. * ax-general.c: Revert. * ax-gdb.h: Revert. * ax-gdb.c: Revert. * avr-tdep.c: Revert. * auxv.c: Revert. * auto-load.c: Revert. * arm-wince-tdep.c: Revert. * arm-tdep.c: Revert. * arm-symbian-tdep.c: Revert. * arm-pikeos-tdep.c: Revert. * arm-obsd-tdep.c: Revert. * arm-nbsd-tdep.c: Revert. * arm-nbsd-nat.c: Revert. * arm-linux-tdep.c: Revert. * arm-linux-nat.c: Revert. * arm-fbsd-tdep.c: Revert. * arm-fbsd-nat.c: Revert. * arm-bsd-tdep.c: Revert. * arch-utils.c: Revert. * arc-tdep.c: Revert. * arc-newlib-tdep.c: Revert. * annotate.h: Revert. * annotate.c: Revert. * amd64-windows-tdep.c: Revert. * amd64-windows-nat.c: Revert. * amd64-tdep.c: Revert. * amd64-sol2-tdep.c: Revert. * amd64-obsd-tdep.c: Revert. * amd64-obsd-nat.c: Revert. * amd64-nbsd-tdep.c: Revert. * amd64-nbsd-nat.c: Revert. * amd64-nat.c: Revert. * amd64-linux-tdep.c: Revert. * amd64-linux-nat.c: Revert. * amd64-fbsd-tdep.c: Revert. * amd64-fbsd-nat.c: Revert. * amd64-dicos-tdep.c: Revert. * amd64-darwin-tdep.c: Revert. * amd64-bsd-nat.c: Revert. * alpha-tdep.c: Revert. * alpha-obsd-tdep.c: Revert. * alpha-nbsd-tdep.c: Revert. * alpha-mdebug-tdep.c: Revert. * alpha-linux-tdep.c: Revert. * alpha-linux-nat.c: Revert. * alpha-bsd-tdep.c: Revert. * alpha-bsd-nat.c: Revert. * aix-thread.c: Revert. * agent.c: Revert. * addrmap.c: Revert. * ada-varobj.c: Revert. * ada-valprint.c: Revert. * ada-typeprint.c: Revert. * ada-tasks.c: Revert. * ada-lang.c: Revert. * aarch64-tdep.c: Revert. * aarch64-ravenscar-thread.c: Revert. * aarch64-newlib-tdep.c: Revert. * aarch64-linux-tdep.c: Revert. * aarch64-linux-nat.c: Revert. * aarch64-fbsd-tdep.c: Revert. * aarch64-fbsd-nat.c: Revert. * aarch32-linux-nat.c: Revert.	2019-04-06 13:47:34 -06:00
Tom Tromey	d55e5aa6b2	Sort includes for files gdb/[a-f]*.[chyl]. ... This patch sorts the include files for the files [a-f]*.[chyl]. The patch was written by a script. Tested by the buildbot. I will follow up with patches to sort the remaining files, by sorting a subset, testing them, and then checking them in. gdb/ChangeLog 2019-04-05 Tom Tromey <tom@tromey.com> * ft32-tdep.c: Sort headers. * frv-tdep.c: Sort headers. * frv-linux-tdep.c: Sort headers. * frame.c: Sort headers. * frame-unwind.c: Sort headers. * frame-base.c: Sort headers. * fork-child.c: Sort headers. * findvar.c: Sort headers. * findcmd.c: Sort headers. * filesystem.c: Sort headers. * filename-seen-cache.h: Sort headers. * filename-seen-cache.c: Sort headers. * fbsd-tdep.c: Sort headers. * fbsd-nat.h: Sort headers. * fbsd-nat.c: Sort headers. * f-valprint.c: Sort headers. * f-typeprint.c: Sort headers. * f-lang.c: Sort headers. * extension.h: Sort headers. * extension.c: Sort headers. * extension-priv.h: Sort headers. * expprint.c: Sort headers. * exec.h: Sort headers. * exec.c: Sort headers. * exceptions.c: Sort headers. * event-top.c: Sort headers. * event-loop.c: Sort headers. * eval.c: Sort headers. * elfread.c: Sort headers. * dwarf2read.h: Sort headers. * dwarf2read.c: Sort headers. * dwarf2loc.c: Sort headers. * dwarf2expr.h: Sort headers. * dwarf2expr.c: Sort headers. * dwarf2-frame.c: Sort headers. * dwarf2-frame-tailcall.c: Sort headers. * dwarf-index-write.h: Sort headers. * dwarf-index-write.c: Sort headers. * dwarf-index-common.c: Sort headers. * dwarf-index-cache.h: Sort headers. * dwarf-index-cache.c: Sort headers. * dummy-frame.c: Sort headers. * dtrace-probe.c: Sort headers. * disasm.h: Sort headers. * disasm.c: Sort headers. * disasm-selftests.c: Sort headers. * dictionary.c: Sort headers. * dicos-tdep.c: Sort headers. * demangle.c: Sort headers. * dcache.h: Sort headers. * dcache.c: Sort headers. * darwin-nat.h: Sort headers. * darwin-nat.c: Sort headers. * darwin-nat-info.c: Sort headers. * d-valprint.c: Sort headers. * d-namespace.c: Sort headers. * d-lang.c: Sort headers. * ctf.c: Sort headers. * csky-tdep.c: Sort headers. * csky-linux-tdep.c: Sort headers. * cris-tdep.c: Sort headers. * cris-linux-tdep.c: Sort headers. * cp-valprint.c: Sort headers. * cp-support.c: Sort headers. * cp-namespace.c: Sort headers. * cp-abi.c: Sort headers. * corelow.c: Sort headers. * corefile.c: Sort headers. * continuations.c: Sort headers. * completer.h: Sort headers. * completer.c: Sort headers. * complaints.c: Sort headers. * coffread.c: Sort headers. * coff-pe-read.c: Sort headers. * cli-out.h: Sort headers. * cli-out.c: Sort headers. * charset.c: Sort headers. * c-varobj.c: Sort headers. * c-valprint.c: Sort headers. * c-typeprint.c: Sort headers. * c-lang.c: Sort headers. * buildsym.c: Sort headers. * buildsym-legacy.c: Sort headers. * build-id.h: Sort headers. * build-id.c: Sort headers. * btrace.c: Sort headers. * bsd-uthread.c: Sort headers. * breakpoint.h: Sort headers. * breakpoint.c: Sort headers. * break-catch-throw.c: Sort headers. * break-catch-syscall.c: Sort headers. * break-catch-sig.c: Sort headers. * blockframe.c: Sort headers. * block.c: Sort headers. * bfin-tdep.c: Sort headers. * bfin-linux-tdep.c: Sort headers. * bfd-target.c: Sort headers. * bcache.c: Sort headers. * ax-general.c: Sort headers. * ax-gdb.h: Sort headers. * ax-gdb.c: Sort headers. * avr-tdep.c: Sort headers. * auxv.c: Sort headers. * auto-load.c: Sort headers. * arm-wince-tdep.c: Sort headers. * arm-tdep.c: Sort headers. * arm-symbian-tdep.c: Sort headers. * arm-pikeos-tdep.c: Sort headers. * arm-obsd-tdep.c: Sort headers. * arm-nbsd-tdep.c: Sort headers. * arm-nbsd-nat.c: Sort headers. * arm-linux-tdep.c: Sort headers. * arm-linux-nat.c: Sort headers. * arm-fbsd-tdep.c: Sort headers. * arm-fbsd-nat.c: Sort headers. * arm-bsd-tdep.c: Sort headers. * arch-utils.c: Sort headers. * arc-tdep.c: Sort headers. * arc-newlib-tdep.c: Sort headers. * annotate.h: Sort headers. * annotate.c: Sort headers. * amd64-windows-tdep.c: Sort headers. * amd64-windows-nat.c: Sort headers. * amd64-tdep.c: Sort headers. * amd64-sol2-tdep.c: Sort headers. * amd64-obsd-tdep.c: Sort headers. * amd64-obsd-nat.c: Sort headers. * amd64-nbsd-tdep.c: Sort headers. * amd64-nbsd-nat.c: Sort headers. * amd64-nat.c: Sort headers. * amd64-linux-tdep.c: Sort headers. * amd64-linux-nat.c: Sort headers. * amd64-fbsd-tdep.c: Sort headers. * amd64-fbsd-nat.c: Sort headers. * amd64-dicos-tdep.c: Sort headers. * amd64-darwin-tdep.c: Sort headers. * amd64-bsd-nat.c: Sort headers. * alpha-tdep.c: Sort headers. * alpha-obsd-tdep.c: Sort headers. * alpha-nbsd-tdep.c: Sort headers. * alpha-mdebug-tdep.c: Sort headers. * alpha-linux-tdep.c: Sort headers. * alpha-linux-nat.c: Sort headers. * alpha-bsd-tdep.c: Sort headers. * alpha-bsd-nat.c: Sort headers. * aix-thread.c: Sort headers. * agent.c: Sort headers. * addrmap.c: Sort headers. * ada-varobj.c: Sort headers. * ada-valprint.c: Sort headers. * ada-typeprint.c: Sort headers. * ada-tasks.c: Sort headers. * ada-lang.c: Sort headers. * aarch64-tdep.c: Sort headers. * aarch64-ravenscar-thread.c: Sort headers. * aarch64-newlib-tdep.c: Sort headers. * aarch64-linux-tdep.c: Sort headers. * aarch64-linux-nat.c: Sort headers. * aarch64-fbsd-tdep.c: Sort headers. * aarch64-fbsd-nat.c: Sort headers. * aarch32-linux-nat.c: Sort headers.	2019-04-05 19:09:35 -06:00
Tom Tromey	a068643d69	Change pid_to_str to return std::string ... Currently the target pid_to_str method returns a const char *, so many implementations have a static buffer that they update. This patch changes these methods to return a std::string instead. I think this is cleaner and avoids possible gotchas when calling pid_to_str on different ptids in a single statement. (Though no such calls exist currently.) This also updates various helper functions, and the gdbarch pid_to_str methods. I also made a best effort to fix all the callers, but I can't build some of the *-nat.c files. Tested by the buildbot. gdb/ChangeLog 2019-03-13 Tom Tromey <tromey@adacore.com> * i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers) (i386_gnu_nat_target::store_registers): Update. * target-debug.h (target_debug_print_std_string): New macro. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * windows-tdep.c (display_one_tib): Update. * tui/tui-stack.c (tui_make_status_line): Update. * top.c (print_inferior_quit_action): Update. * thread.c (thr_try_catch_cmd): Update. (add_thread_with_info): Update. (thread_target_id_str): Update. (thr_try_catch_cmd): Update. (thread_command): Update. (thread_find_command): Update. * record-btrace.c (record_btrace_target::info_record) (record_btrace_resume_thread, record_btrace_target::resume) (record_btrace_cancel_resume, record_btrace_step_thread) (record_btrace_target::wait, record_btrace_target::wait) (record_btrace_target::wait, record_btrace_target::stop): Update. * progspace.c (print_program_space): Update. * process-stratum-target.c (process_stratum_target::thread_address_space): Update. * linux-fork.c (linux_fork_mourn_inferior) (detach_checkpoint_command, info_checkpoints_command) (linux_fork_context): Update. (linux_fork_detach): Update. (class scoped_switch_fork_info): Update. (delete_checkpoint_command): Update. * infrun.c (follow_fork_inferior): Update. (follow_fork_inferior): Update. (proceed_after_vfork_done): Update. (handle_vfork_child_exec_or_exit): Update. (follow_exec): Update. (displaced_step_prepare_throw): Update. (displaced_step_restore): Update. (start_step_over): Update. (resume_1): Update. (clear_proceed_status_thread): Update. (proceed): Update. (print_target_wait_results): Update. (do_target_wait): Update. (context_switch): Update. (stop_all_threads): Update. (restart_threads): Update. (finish_step_over): Update. (handle_signal_stop): Update. (switch_back_to_stepped_thread): Update. (keep_going_pass_signal): Update. (print_exited_reason): Update. (normal_stop): Update. * inferior.c (inferior_pid_to_str): Change return type. (print_selected_inferior): Update. (add_inferior): Update. (detach_inferior): Update. * dummy-frame.c (fprint_dummy_frames): Update. * dcache.c (dcache_info_1): Update. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Update. * linux-tdep.c (linux_core_pid_to_str): Change return type. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return type. * fbsd-tdep.c (fbsd_core_pid_to_str): Change return type. * sol2-tdep.h (sol2_core_pid_to_str): Change return type. * sol2-tdep.c (sol2_core_pid_to_str): Change return type. * gdbarch.c, gdbarch.h: Rebuild. * gdbarch.sh (core_pid_to_str): Change return type. * windows-nat.c (struct windows_nat_target) <pid_to_str>: Change return type. (windows_nat_target::pid_to_str): Change return type. (windows_delete_thread): Update. (windows_nat_target::attach): Update. (windows_nat_target::files_info): Update. * target-delegates.c: Rebuild. * sol-thread.c (class sol_thread_target) <pid_to_str>: Change return type. (sol_thread_target::pid_to_str): Change return type. * remote.c (class remote_target) <pid_to_str>: Change return type. (remote_target::pid_to_str): Change return type. (extended_remote_target::attach, remote_target::remote_stop_ns) (remote_target::remote_notif_remove_queued_reply) (remote_target::push_stop_reply, remote_target::disable_btrace): Update. (extended_remote_target::attach): Update. * remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return type. (gdbsim_target::pid_to_str): Change return type. * ravenscar-thread.c (struct ravenscar_thread_target) <pid_to_str>: Change return type. (ravenscar_thread_target::pid_to_str): Change return type. * procfs.c (class procfs_target) <pid_to_str>: Change return type. (procfs_target::pid_to_str): Change return type. (procfs_target::attach): Update. (procfs_target::detach): Update. (procfs_target::fetch_registers): Update. (procfs_target::store_registers): Update. (procfs_target::wait): Update. (procfs_target::files_info): Update. * obsd-nat.c (obsd_nat_target::pid_to_str): Change return type. * nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change return type. (nto_procfs_target::pid_to_str): Change return type. (nto_procfs_target::files_info, nto_procfs_target::attach): Update. * linux-thread-db.c (class thread_db_target) <pid_to_str>: Change return type. * linux-nat.c (linux_nat_target::pid_to_str): Change return type. (exit_lwp): Update. (attach_proc_task_lwp_callback, get_detach_signal) (detach_one_lwp, resume_lwp, linux_nat_target::resume) (linux_nat_target::resume, wait_lwp, stop_callback) (maybe_clear_ignore_sigint, stop_wait_callback, status_callback) (save_stop_reason, select_event_lwp, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps) (linux_nat_target::wait, linux_nat_stop_lwp): Update. * inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return type. (inf_ptrace_target::attach): Update. (inf_ptrace_target::files_info): Update. * go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return type. (go32_nat_target::pid_to_str): Change return type. * gnu-nat.c (gnu_nat_target::pid_to_str): Change return type. (gnu_nat_target::wait): Update. (gnu_nat_target::wait): Update. (gnu_nat_target::resume): Update. * fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type. (fbsd_nat_target::wait): Update. * darwin-nat.c (darwin_nat_target::pid_to_str): Change return type. (darwin_nat_target::attach): Update. * corelow.c (class core_target) <pid_to_str>: Change return type. (core_target::pid_to_str): Change return type. * target.c (normal_pid_to_str): Change return type. (default_pid_to_str): Likewise. (target_pid_to_str): Change return type. (target_translate_tls_address): Update. (target_announce_detach): Update. * bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change return type. (bsd_uthread_target::pid_to_str): Change return type. * bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return type. (bsd_kvm_target::pid_to_str): Change return type. * aix-thread.c (class aix_thread_target) <pid_to_str>: Change return type. (aix_thread_target::pid_to_str): Change return type. * target.h (struct target_ops) <pid_to_str>: Change return type. (target_pid_to_str, normal_pid_to_str): Likewise. * obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return type. * linux-nat.h (class linux_nat_target) <pid_to_str>: Change return type. * inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change return type. * gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return type. * fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return type. * darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change return type.	2019-03-13 13:50:13 -06:00
John Baldwin	945f3901b5	Add a helper function to resolve TLS variable addresses for FreeBSD. ... The fbsd_get_thread_local_address function accepts the base address of a thread's DTV array and the base address of an object file's link map and uses this to compute a TLS variable's address. FreeBSD architectures use an architecture-specific method to determine the address of the DTV array pointer and call this helper function to perform the rest of the address calculation. * fbsd-tdep.c (fbsd_pspace_data_handle): New variable. (struct fbsd_pspace_data): New type. (get_fbsd_pspace_data, fbsd_pspace_data_cleanup) (fbsd_read_integer_by_name, fbsd_fetch_rtld_offsets) (fbsd_get_tls_index, fbsd_get_thread_local_address): New function. (_initialize_fbsd_tdep): Initialize 'fbsd_pspace_data_handle'. * fbsd-tdep.c (fbsd_get_thread_local_address): New prototype.	2019-03-12 13:45:48 -07:00
Joel Brobecker	42a4f53d2b	Update copyright year range in all GDB files. ... This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.	2019-01-01 10:01:51 +04:00
Rajendra SY	e61667ef14	Implement the "gdb_signal_to/from_target" gdbarch methods for FreeBSD. ... This fixes failures in the gdb.base/exitsignal.exp test. gdb/ChangeLog: PR gdb/23093 * gdb/fbsd-tdep.c (fbsd_gdb_signal_from_target) (fbsd_gdb_signal_to_target): New. (fbsd_init_abi): Install gdbarch "signal_from_target" and "signal_to_target" methods.	2018-11-29 13:26:31 -08:00
Pedro Alves	0803633106	Per-inferior thread list, thread ranges/iterators, down with ALL_THREADS, etc. ... As preparation for multi-target, this patch makes each inferior have its own thread list. This isn't absolutely necessary for multi-target, but simplifies things. It originally stemmed from the desire to eliminate the init_thread_list calls sprinkled around, plus it makes it more efficient to iterate over threads of a given inferior (no need to always iterate over threads of all inferiors). We still need to iterate over threads of all inferiors in a number of places, which means we'd need adjust the ALL_THREADS / ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros to have an extra for loop, like: #define ALL_THREADS (thr, inf) \ for (inf = inferior_list; inf; inf = inf->next) \ for (thr = inf->thread_list; thr; thr = thr->next) causes problems with code that does "break" or "continue" within the ALL_THREADS loop body. Plus, we need to declare the extra "inf" local variable in order to pass it as temporary variable to ALL_THREADS (etc.) It gets even trickier when we consider extending the macros to filter out threads matching a ptid_t and a target. The macros become tricker to read/write. Been there. An alternative (which was my next attempt), is to replace the ALL_THREADS etc. iteration style with for_each_all_threads, for_each_non_exited_threads, etc. functions which would take a callback as parameter, which would usually be passed a lambda. However, I did not find that satisfactory at all, because the resulting code ends up a little less natural / more noisy to read, write and debug/step-through (due to use of lambdas), and in many places where we use "continue;" to skip to the next thread now need to use "return;". (I ran into hard to debug bugs caused by a continue/return confusion.) I.e., before: ALL_NON_EXITED_THREADS (tp) { if (tp->not_what_I_want) continue; // do something } would turn into: for_each_non_exited_thread ([&] (thread_info *tp) { if (tp->not_what_I_want) return; // do something }); Lastly, the solution I settled with was to replace the ALL_THREADS / ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges and iterators, such that you can instead naturaly iterate over threads/inferiors using range-for, like e.g,.: // all threads, including THREAD_EXITED threads. for (thread_info *tp : all_threads ()) { .... } // all non-exited threads. for (thread_info *tp : all_non_exited_threads ()) { .... } // all non-exited threads of INF inferior. for (thread_info *tp : inf->non_exited_threads ()) { .... } The all_non_exited_threads() function takes an optional filter ptid_t as parameter, which is quite convenient when we need to iterate over threads matching that filter. See e.g., how the set_executing/set_stop_requested/finish_thread_state etc. functions in thread.c end up being simplified. Most of the patch thus is about adding the infrustructure for allowing the above. Later on when we get to actual multi-target, these functions/ranges/iterators will gain a "target_ops *" parameter so that e.g., we can iterate over all threads of a given target that match a given filter ptid_t. The only entry points users needs to be aware of are the all_threads/all_non_exited_threads etc. functions seen above. Thus, those functions are declared in gdbthread.h/inferior.h. The actual iterators/ranges are mainly "internals" and thus are put out of view in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That keeps the gdbthread.h/inferior.h headers quite a bit more readable. A common/safe-iterator.h header is added which adds a template that can be used to build "safe" iterators, which are forward iterators that can be used to replace the ALL_THREADS_SAFE macro and other instances of the same idiom in future. There's a little bit of shuffling of code between gdbthread.h/thread.c/inferior.h in the patch. That is necessary in order to avoid circular dependencies between the gdbthread.h/inferior.h headers. As for the init_thread_list calls sprinkled around, they're all eliminated by this patch, and a new, central call is added to inferior_appeared. Note how also related to that, there's a call to init_wait_for_inferior in remote.c that is eliminated. init_wait_for_inferior is currently responsible for discarding skipped inline frames, which had to be moved elsewhere. Given that nowadays we always have a thread even for single-threaded processes, the natural place is to delete a frame's inline frame info when we delete the thread. I.e., from clear_thread_inferior_resources. gdb/ChangeLog: 2018-11-22 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_SFILES): Add thread-iter.c. * breakpoint.c (breakpoints_should_be_inserted_now): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (print_one_breakpoint_location): Replace ALL_INFERIORS with all_inferiors. * bsd-kvm.c: Include inferior.h. * btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * common/filtered-iterator.h: New. * common/safe-iterator.h: New. * corelow.c (core_target_open): Don't call init_thread_list here. * darwin-nat.c (thread_info_from_private_thread_info): Replace ALL_THREADS with all_threads. * fbsd-nat.c (fbsd_nat_target::resume): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fbsd-tdep.c (fbsd_make_corefile_notes): Replace ALL_NON_EXITED_THREADS with inf->non_exited_threads. * fork-child.c (postfork_hook): Don't call init_thread_list here. * gdbarch-selftests.c (register_to_value_test): Adjust. * gdbthread.h: Don't include "inferior.h" here. (struct inferior): Forward declare. (enum step_over_calls_kind): Moved here from inferior.h. (thread_info::deletable): Definition moved to thread.c. (find_thread_ptid (inferior *, ptid_t)): Declare. (ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete. Include "thread-iter.h". (all_threads, all_non_exited_threads, all_threads_safe): New. (any_thread_p): Declare. (thread_list): Delete. * infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. (proceed_after_attach_callback): Delete. (proceed_after_attach): Take an inferior pointer instead of an integer PID. Adjust to use range-for. (attach_post_wait): Pass down inferior pointer instead of pid. Use range-for instead of ALL_NON_EXITED_THREADS. (detach_command): Remove init_thread_list call. * inferior-iter.h: New. * inferior.c (struct delete_thread_of_inferior_arg): Delete. (delete_thread_of_inferior): Delete. (delete_inferior, exit_inferior_1): Use range-for with inf->threads_safe() instead of iterate_over_threads. (inferior_appeared): Call init_thread_list here. (discard_all_inferiors): Use all_non_exited_inferiors. (find_inferior_id, find_inferior_pid): Use all_inferiors. (iterate_over_inferiors): Use all_inferiors_safe. (have_inferiors, number_of_live_inferiors): Use all_non_exited_inferiors. (number_of_inferiors): Use all_inferiors and std::distance. (print_inferior): Use all_inferiors. * inferior.h: Include gdbthread.h. (enum step_over_calls_kind): Moved to gdbthread.h. (struct inferior) <thread_list>: New field. <threads, non_exited_threads, threads_safe>: New methods. (ALL_INFERIORS): Delete. Include "inferior-iter.h". (ALL_NON_EXITED_INFERIORS): Delete. (all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New functions. * inflow.c (child_interrupt, child_pass_ctrlc): Replace ALL_NON_EXITED_THREADS with all_non_exited_threads. * infrun.c (follow_exec): Use all_threads_safe. (clear_proceed_status, proceed): Use all_non_exited_threads. (init_wait_for_inferior): Don't clear inline frame state here. (infrun_thread_stop_requested, for_each_just_stopped_thread): Use all_threads instead of ALL_NON_EXITED_THREADS. (random_pending_event_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use a lambda for repeated code. (clean_up_just_stopped_threads_fsms): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (handle_no_resumed): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Use all_inferiors instead of ALL_INFERIORS. (restart_threads, switch_back_to_stepped_thread): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with all_inferiors. (kill_unfollowed_fork_children): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-tdep.c (linux_make_corefile_notes): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * linux-thread-db.c (thread_db_target::update_thread_list): Replace ALL_INFERIORS with all_inferiors. (thread_db_target::thread_handle_to_thread_info): Use inf->non_exited_threads instead of ALL_NON_EXITED_THREADS. * mi/mi-interp.c (multiple_inferiors_p): New. (mi_on_resume_1): Simplify using all_non_exited_threads and multiple_inferiors_p. * mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * nto-procfs.c (nto_procfs_target::open): Don't call init_thread_list here. * record-btrace.c (record_btrace_target_open) (record_btrace_target::stop_recording) (record_btrace_target::close) (record_btrace_target::record_is_replaying) (record_btrace_target::resume, record_btrace_target::wait) (record_btrace_target::record_stop_replaying): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * record-full.c (record_full_wait_1): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * regcache.c (cooked_read_test): Remove reference to global thread_list. * remote-sim.c (gdbsim_target::create_inferior): Don't call init_thread_list here. * remote.c (remote_target::update_thread_list): Use all_threads_safe instead of ALL_NON_EXITED_THREADS. (remote_target::process_initial_stop_replies): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::open_1): Don't call init_thread_list here. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::commit_resume) (remote_target::remove_new_fork_children): Replace ALL_INFERIORS with all_non_exited_inferiors and use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. (remote_target::kill_new_fork_children): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove init_thread_list and init_wait_for_inferior calls. (remote_target::remote_btrace_maybe_reopen) (remote_target::thread_handle_to_thread_info): Use all_non_exited_threads instead of ALL_NON_EXITED_THREADS. * target.c (target_terminal::restore_inferior) (target_terminal_is_ours_kind): Replace ALL_INFERIORS with all_non_exited_inferiors. * thread-iter.c: New file. * thread-iter.h: New file. * thread.c: Include "inline-frame.h". (thread_list): Delete. (clear_thread_inferior_resources): Call clear_inline_frame_state. (init_thread_list): Use all_threads_safe instead of ALL_THREADS_SAFE. Adjust to per-inferior thread lists. (new_thread): Adjust to per-inferior thread lists. (add_thread_silent): Pass inferior to find_thread_ptid. (thread_info::deletable): New, moved from the header. (delete_thread_1): Adjust to per-inferior thread lists. (find_thread_global_id): Use inf->threads(). (find_thread_ptid): Use find_inferior_ptid and pass inferior to find_thread_ptid. (find_thread_ptid(inferior*, ptid_t)): New overload. (iterate_over_threads): Use all_threads_safe. (any_thread_p): New. (thread_count): Use all_threads and std::distance. (live_threads_count): Use all_non_exited_threads and std::distance. (valid_global_thread_id): Use all_threads. (in_thread_list): Use find_thread_ptid. (first_thread_of_inferior): Adjust to per-inferior thread lists. (any_thread_of_inferior, any_live_thread_of_inferior): Use inf->non_exited_threads(). (prune_threads, delete_exited_threads): Use all_threads_safe. (thread_change_ptid): Pass inferior pointer to find_thread_ptid. (set_resumed, set_running): Use all_non_exited_threads. (is_thread_state, is_stopped, is_exited, is_running) (is_executing): Delete. (set_executing, set_stop_requested, finish_thread_state): Use all_non_exited_threads. (print_thread_info_1): Use all_inferiors and all_threads. (thread_apply_all_command): Use all_non_exited_threads. (thread_find_command): Use all_threads. (update_threads_executing): Use all_non_exited_threads. * tid-parse.c (parse_thread_id): Use inf->threads. * x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().	2018-11-22 16:13:23 +00:00
John Baldwin	fd2b4de5e6	Treat all unknown auxv tags on FreeBSD as unknown. ... Previously, default_print_auxv_entry was called for any auxv entries without a known AT_FREEBSD_* tag. However, this resulted in false positive matches when FreeBSD added a new tag that has an existing AT_* tag with a different meaning. Instead, only call default_print_auxv_entry for specific tag values for which FreeBSD matches the default AT_* values. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Only use default_print_auxv_entry for specific tag values.	2018-10-26 10:20:56 -07:00
John Baldwin	d7ded98f4c	Support AT_HWCAP2 on FreeBSD. ... include/ChangeLog: * elf/common.h (AT_FREEBSD_HWCAP2): Define. gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_FREEBSD_HWCAP2.	2018-10-26 10:20:56 -07:00
John Baldwin	6f3b1098e8	Share the code to format "info proc mappings" entries for FreeBSD. ... gdb/ChangeLog: * fbsd-nat.c (fbsd_nat_target::info_proc) Use fbsd_info_proc_mappings_header and fbsd_info_proc_mappings_entry. * fbsd-tdep.c (fbsd_vm_map_entry_flags): Mark static. (fbsd_info_proc_mappings_header, fbsd_info_proc_mappings_entry): New functions. (fbsd_core_info_proc_mappings): Use fbsd_info_proc_mappings_header and fbsd_info_proc_mappings_header. * fbsd-tdep.h (fbsd_vm_map_entry_flags): Remove. (fbsd_info_proc_mappings_header, fbsd_info_proc_mappings_entry): New.	2018-10-17 11:42:00 -07:00
John Baldwin	07147793e6	Add missing spaces after inet_ntop invocations. ... gdb/ChangeLog: * fbsd-tdep.c (fbsd_print_sockaddr_in): Style fix. (fbsd_print_sockaddr_in6): Likewise.	2018-09-19 12:22:07 -07:00
John Baldwin	57c2a98a4c	Add support for 'info proc files' on FreeBSD core dumps. ... Walk the list of struct kinfo_file objects in the NT_FREEBSD_PROCSTAT_FILES core dump note outputting a description of each open file descriptor. For sockets, the local and remote socket addresses are displayed in place of the file name field. For UNIX local domain sockets, only a single address is displayed since most UNIX sockets only have one valid address and printing both pathnames could be quite long. The output format was somewhat inspired by the output of the "procstat -f" command on FreeBSD, but with a few less details and some fields were condensed. gdb/ChangeLog: * fbsd-tdep.c (KF_FLAGS, KF_OFFSET, KF_VNODE_TYPE, KF_SOCK_DOMAIN) (KF_SOCK_TYPE, KF_SOCK_PROTOCOL, KF_SA_LOCAL, KF_SA_PEER) (KINFO_FILE_TYPE_SOCKET, KINFO_FILE_TYPE_PIPE) (KINFO_FILE_TYPE_FIFO, KINFO_FILE_TYPE_KQUEUE) (KINFO_FILE_TYPE_CRYPTO, KINFO_FILE_TYPE_MQUEUE) (KINFO_FILE_TYPE_SHM, KINFO_FILE_TYPE_SEM, KINFO_FILE_TYPE_PTS) (KINFO_FILE_TYPE_PROCDESC, KINFO_FILE_FD_TYPE_ROOT) (KINFO_FILE_FD_TYPE_JAIL, KINFO_FILE_FD_TYPE_TRACE) (KINFO_FILE_FD_TYPE_CTTY, KINFO_FILE_FLAG_READ) (KINFO_FILE_FLAG_WRITE, KINFO_FILE_FLAG_APPEND) (KINFO_FILE_FLAG_ASYNC, KINFO_FILE_FLAG_FSYNC) (KINFO_FILE_FLAG_NONBLOCK, KINFO_FILE_FLAG_DIRECT) (KINFO_FILE_FLAG_HASLOCK, KINFO_FILE_FLAG_EXEC) (KINFO_FILE_VTYPE_VREG, KINFO_FILE_VTYPE_VDIR) (KINFO_FILE_VTYPE_VCHR, KINFO_FILE_VTYPE_VLNK) (KINFO_FILE_VTYPE_VSOCK, KINFO_FILE_VTYPE_VFIFO, FBSD_AF_UNIX) (FBSD_AF_INET, FBSD_AF_INET6, FBSD_SOCK_STREAM, FBSD_SOCK_DGRAM) (FBSD_SOCK_SEQPACKET, FBSD_IPPROTO_ICMP, FBSD_IPPROTO_TCP) (FBSD_IPPROTO_UDP, FBSD_IPPROTO_SCTP): New defines. (struct fbsd_sockaddr_in, struct fbsd_sockaddr_in6) (struct fbsd_sockaddr_un): New types. (fbsd_file_fd, fbsd_file_type, fbsd_file_flags, fbsd_ipproto) (fbsd_print_sockaddr_in, fbsd_print_sockaddr_in6) (fbsd_info_proc_files_header, fbsd_info_proc_files_entry) (fbsd_core_info_proc_files): New functions. (fbsd_core_info_proc): List open file descriptors for IP_FILES and IP_ALL. * fbsd-tdep.h (fbsd_info_proc_files_header) (fbsd_info_proc_files_entry): New.	2018-09-18 14:05:47 -07:00
John Baldwin	9f235e09e4	Use KF_PATH to verify the size of a struct kinfo_file. ... fbsd_core_vnode_path needs to use the offset of the kf_path member of struct kinfo_file as the minimum size of a struct kinfo_file object. However, it was using KVE_PATH instead due to a copy and paste bug. While here, fix another copy and paste bug in the error message for a truncated kinfo_file object. gdb/ChangeLog: * fbsd-tdep.c (fbsd_core_vnode_path): Use KF_PATH instead of KVE_PATH.	2018-09-18 14:05:47 -07:00
Simon Ser	739ab2e92e	Generate NT_PROCSTAT_{AUXV,VMMAP,PS_STRINGS} in FreeBSD coredumps ... gcore generates NT_AUXV and NT_FILE notes for Linux targets. On FreeBSD auxv is stored in a NT_PROCSTAT_AUXV section, virtual memory mappings are stored in a NT_PROCSTAT_VMMAP, and both are prefixed with the struct size. In addition, store a NT_PROCSTAT_PS_STRINGS note saving the initial location of the argv[] and environment[] arrays. gdb/ChangeLog: PR gdb/23105 * fbsd-nat.c (fbsd_nat_target::xfer_partial): Add support for TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS. * fbsd-tdep.c (fbsd_make_note_desc): New. (fbsd_make_corefile_notes): Write NT_PROCSTAT_AUXV, NT_PROCSTAT_VMMAP and NT_PROCSTAT_PS_STRINGS notes. * target.h (enum target_object) Add FreeBSD-specific TARGET_OBJECT_FREEBSD_VMMAP and TARGET_OBJECT_FREEBSD_PS_STRINGS.	2018-09-06 15:07:59 -07:00
Alan Hayward	a616bb9450	Split size in regset section iterators ... In the existing code, when using the regset section iteration functions, the size parameter is used in different ways. With collect, size is used to create the buffer in which to write the regset. (see linux-tdep.c::linux_collect_regset_section_cb). With supply, size is used to confirm the existing regset is the correct size. If REGSET_VARIABLE_SIZE is set then the regset can be bigger than size. Effectively, size is the minimum possible size of the regset. (see corelow.c::get_core_register_section). There are currently no targets with both REGSET_VARIABLE_SIZE and a collect function. In SVE, a corefile can contain one of two formats after the header, both of which are different sizes. However, when writing a core file, we always want to write out the full bigger size. To allow support of collects for REGSET_VARIABLE_SIZE we need two sizes. This is done by adding supply_size and collect_size. gdb/ * aarch64-fbsd-tdep.c (aarch64_fbsd_iterate_over_regset_sections): Add supply_size and collect_size. * aarch64-linux-tdep.c (aarch64_linux_iterate_over_regset_sections): Likewise. * alpha-linux-tdep.c (alpha_linux_iterate_over_regset_sections): * alpha-nbsd-tdep.c (alphanbsd_iterate_over_regset_sections): Likewise. * amd64-fbsd-tdep.c (amd64fbsd_iterate_over_regset_sections): Likewise. * amd64-linux-tdep.c (amd64_linux_iterate_over_regset_sections): Likewise. * arm-bsd-tdep.c (armbsd_iterate_over_regset_sections): Likewise. * arm-fbsd-tdep.c (arm_fbsd_iterate_over_regset_sections): Likewise. * arm-linux-tdep.c (arm_linux_iterate_over_regset_sections): Likewise. * corelow.c (get_core_registers_cb): Likewise. (core_target::fetch_registers): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * frv-linux-tdep.c (frv_linux_iterate_over_regset_sections): Likewise. * gdbarch.h (void): Regenerate. * gdbarch.sh: Add supply_size and collect_size. * hppa-linux-tdep.c (hppa_linux_iterate_over_regset_sections): Likewise. * hppa-nbsd-tdep.c (hppanbsd_iterate_over_regset_sections): Likewise. * hppa-obsd-tdep.c (hppaobsd_iterate_over_regset_sections): Likewise. * i386-fbsd-tdep.c (i386fbsd_iterate_over_regset_sections): Likewise. * i386-linux-tdep.c (i386_linux_iterate_over_regset_sections): Likewise. * i386-tdep.c (i386_iterate_over_regset_sections): Likewise. * ia64-linux-tdep.c (ia64_linux_iterate_over_regset_sections): Likewise. * linux-tdep.c (linux_collect_regset_section_cb): Likewise. * m32r-linux-tdep.c (m32r_linux_iterate_over_regset_sections): Likewise. * m68k-bsd-tdep.c (m68kbsd_iterate_over_regset_sections): Likewise. * m68k-linux-tdep.c (m68k_linux_iterate_over_regset_sections): Likewise. * mips-fbsd-tdep.c (mips_fbsd_iterate_over_regset_sections): Likewise. * mips-linux-tdep.c (mips_linux_iterate_over_regset_sections): Likewise. * mips-nbsd-tdep.c (mipsnbsd_iterate_over_regset_sections): Likewise. * mips64-obsd-tdep.c (mips64obsd_iterate_over_regset_sections): Likewise. * mn10300-linux-tdep.c (am33_iterate_over_regset_sections): Likewise. * nios2-linux-tdep.c (nios2_iterate_over_regset_sections): Likewise. * ppc-fbsd-tdep.c (ppcfbsd_iterate_over_regset_sections): Likewise. * ppc-linux-tdep.c (ppc_linux_iterate_over_regset_sections): Likewise. * ppc-nbsd-tdep.c (ppcnbsd_iterate_over_regset_sections): Likewise. * ppc-obsd-tdep.c (ppcobsd_iterate_over_regset_sections): Likewise. * riscv-linux-tdep.c (riscv_linux_iterate_over_regset_sections): Likewise. * rs6000-aix-tdep.c (rs6000_aix_iterate_over_regset_sections): Likewise. * s390-linux-tdep.c (s390_iterate_over_regset_sections): Likewise. * score-tdep.c (score7_linux_iterate_over_regset_sections): Likewise. * sh-tdep.c (sh_iterate_over_regset_sections): Likewise. * sparc-tdep.c (sparc_iterate_over_regset_sections): Likewise. * tilegx-linux-tdep.c (tilegx_iterate_over_regset_sections): Likewise. * vax-tdep.c (vax_iterate_over_regset_sections): Likewise. * xtensa-tdep.c (xtensa_iterate_over_regset_sections): Likewise.	2018-08-13 10:16:41 +01:00
Tom Tromey	8d49165d83	Simple unused variable removals ... This patch holds all the straightforward unused variable deletions. gdb/ChangeLog 2018-07-22 Tom Tromey <tom@tromey.com> * guile/scm-value.c (gdbscm_value_call): Remove unused variables. * guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow) (vlscm_convert_typed_value_from_scheme): Remove unused variable. * buildsym-legacy.c (get_macro_table): Remove unused variable. * stack.c (frame_apply_level_command): Remove unused variable. * tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable. * sparc64-tdep.c (adi_examine_command): Remove unused variable. * rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove unused variable. * nios2-tdep.c (nios2_push_dummy_call): Remove unused variable. * mep-tdep.c (mep_push_dummy_call): Remove unused variable. * ada-lang.c (ada_lookup_symbol_list_worker): Remove unused variable. * amd64-tdep.c (amd64_supply_xsave): Remove unused variable. * arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused variable. * breakpoint.c (check_no_tracepoint_commands, update_watchpoint): Remove unused variable. * cli/cli-script.c (recurse_read_control_structure): Remove unused variable. * common/tdesc.c (print_xml_feature::visit): Remove unused variable. * compile/compile-object-load.c (store_regs): Remove unused variables. * complaints.c (clear_complaints): Remove unused variable. * corelow.c (core_target_open): Remove unused variable. * fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused variable. * guile/scm-frame.c (gdbscm_frame_read_var): Remove unused variable. * guile/scm-symtab.c (stscm_print_sal_smob): Remove unused variable. * guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused variable. * guile/scm-utils.c (gdbscm_parse_function_args): Remove unused variable. * hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused variable. * ia64-tdep.c (examine_prologue): Remove unused variable. * infcall.c (run_inferior_call): Remove unused variable. * inferior.c (exit_inferior): Remove unused variable. * infrun.c (infrun_thread_ptid_changed): Remove unused variable. * linespec.c (decode_line_2): Remove unused variable. * linux-nat.c (super_close): Remove. * linux-tdep.c (linux_info_proc): Remove unused variable. * mi/mi-main.c (mi_execute_command): Remove unused variable. * microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache): Remove unused variable. * parse.c (find_minsym_type_and_address): Remove unused variable. * printcmd.c (info_symbol_command, printf_floating): Remove unused variable. * python/py-breakpoint.c (bppy_set_commands): Remove unused variable. * python/py-unwind.c (unwind_infopy_dealloc): Remove unused variables. * record-btrace.c (record_btrace_target::store_registers): Remove unused variable. (cmd_show_record_btrace_cpu): Remove unused variable. * riscv-tdep.c (riscv_register_reggroup_p) (riscv_push_dummy_call, riscv_return_value): Remove unused variable. * rust-exp.y (literal): Remove unused variable. * rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove unused variable. <STRUCTOP_ANONYMOUS>: Likewise. * s390-linux-tdep.c (s390_linux_init_abi_31) (s390_linux_init_abi_64): Remove unused variable. * ser-ming2.c (ser_windows_read_prim, pipe_select_thread) (file_select_thread, net_windows_open, _initialize_ser_windows): Remove unused variables. * symtab.c (find_pc_sect_line): Remove unused variable. * target-memory.c (compute_garbled_blocks): Remove unused variable. (target_write_memory_blocks): Remove unused variable. * target.c (target_stack::unpush): Remove unused variables. * tracepoint.c (start_tracing, all_tracepoint_actions) (merge_uploaded_trace_state_variables) (print_one_static_tracepoint_marker): Remove unused variable. * unittests/basic_string_view/element_access/char/1.cc (test01): Remove unused variable. * windows-nat.c (windows_continue, windows_add_all_dlls) (do_initial_windows_stuff, windows_nat_target::create_inferior): Remove unused variables.	2018-07-22 13:20:01 -06:00
Tom Tromey	e38504b392	Remove ptid_get_lwp ... This removes ptid_get_lwp in favor of calling the ptid_t::lwp method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_get_lwp): Remove. * common/ptid.h (ptid_get_lwp): Don't declare. * aarch64-linux-nat.c: Update. * ada-tasks.c: Update. * aix-thread.c: Update. * amd64-linux-nat.c: Update. * arm-linux-nat.c: Update. * corelow.c: Update. * fbsd-nat.c: Update. * fbsd-tdep.c: Update. * gnu-nat.c: Update. * i386-cygwin-tdep.c: Update. * i386-gnu-nat.c: Update. * i386-linux-nat.c: Update. * ia64-linux-nat.c: Update. * inf-ptrace.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * mips-linux-nat.c: Update. * nat/aarch64-linux-hw-point.c: Update. * nat/aarch64-linux.c: Update. * nat/linux-btrace.c: Update. * nat/linux-osdata.c: Update. * nat/linux-procfs.c: Update. * nat/x86-linux-dregs.c: Update. * obsd-nat.c: Update. * ppc-fbsd-nat.c: Update. * ppc-linux-nat.c: Update. * procfs.c: Update. * python/py-infthread.c: Update. * ravenscar-thread.c: Update. * remote.c: Update. * s390-linux-nat.c: Update. * sol-thread.c: Update. * sol2-tdep.c: Update. * spu-linux-nat.c: Update. * x86-linux-nat.c: Update. * xtensa-linux-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * linux-mips-low.c: Update. * lynx-low.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * thread-db.c: Update.	2018-07-03 11:36:43 -06:00
Tom Tromey	e99b03dcf4	Remove ptid_get_pid ... This removes ptid_get_pid in favor of calling the ptid_t::pid method. gdb/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * common/ptid.c (ptid_get_pid): Remove. * common/ptid.h (ptid_get_pid): Don't declare. * aarch64-linux-nat.c: Update. * ada-lang.c: Update. * aix-thread.c: Update. * alpha-bsd-nat.c: Update. * amd64-fbsd-nat.c: Update. * amd64-linux-nat.c: Update. * arm-linux-nat.c: Update. * arm-nbsd-nat.c: Update. * auxv.c: Update. * break-catch-syscall.c: Update. * breakpoint.c: Update. * bsd-uthread.c: Update. * corelow.c: Update. * ctf.c: Update. * darwin-nat.c: Update. * fbsd-nat.c: Update. * fbsd-tdep.c: Update. * gcore.c: Update. * gnu-nat.c: Update. * hppa-nbsd-nat.c: Update. * hppa-obsd-nat.c: Update. * i386-fbsd-nat.c: Update. * ia64-linux-nat.c: Update. * inf-ptrace.c: Update. * infcmd.c: Update. * inferior.c: Update. * inferior.h: Update. * inflow.c: Update. * infrun.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * m68k-bsd-nat.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * mips-linux-nat.c: Update. * mips-nbsd-nat.c: Update. * mips64-obsd-nat.c: Update. * nat/aarch64-linux-hw-point.c: Update. * nat/aarch64-linux.c: Update. * nat/linux-btrace.c: Update. * nat/linux-osdata.c: Update. * nat/linux-procfs.c: Update. * nat/x86-linux-dregs.c: Update. * nto-procfs.c: Update. * obsd-nat.c: Update. * ppc-linux-nat.c: Update. * ppc-nbsd-nat.c: Update. * ppc-obsd-nat.c: Update. * proc-service.c: Update. * procfs.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * ravenscar-thread.c: Update. * record.c: Update. * remote-sim.c: Update. * remote.c: Update. * rs6000-nat.c: Update. * s390-linux-nat.c: Update. * sh-nbsd-nat.c: Update. * sol-thread.c: Update. * sparc-nat.c: Update. * sparc64-tdep.c: Update. * spu-linux-nat.c: Update. * spu-tdep.c: Update. * target-debug.h: Update. * target.c: Update. * thread.c: Update. * tid-parse.c: Update. * tracefile-tfile.c: Update. * vax-bsd-nat.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * x86-nat.c: Update. gdb/gdbserver/ChangeLog 2018-07-03 Tom Tromey <tom@tromey.com> * linux-low.c: Update. * linux-mips-low.c: Update. * lynx-low.c: Update. * mem-break.c: Update. * nto-low.c: Update. * remote-utils.c: Update. * server.c: Update. * spu-low.c: Update. * target.c: Update. * tracepoint.c: Update.	2018-07-03 11:36:42 -06:00
Pedro Alves	00431a78b2	Use thread_info and inferior pointers more throughout ... This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.	2018-06-21 17:09:31 +01:00
John Baldwin	906b4aac4c	Use the correct value for the offset of 'kve_protection'. ... I had forgotten to convert the decimal output of 'ptype /o' to hex (but still used a 0x prefix) for the KVE_PROTECTION constant defining the offset of the 'kve_protection' field in the 'kinfo_vmentry' structure. This resulted in garbage permissions for entries in 'info proc mappings' for FreeBSD core dumps. gdb/ChangeLog: * fbsd-tdep.c (KVE_PROTECTION): Correct value.	2018-01-12 12:05:50 -08:00
John Baldwin	d2176225dc	Support 'info proc' for FreeBSD process core dumps. ... - Command line arguments are obtained from the pr_psargs[] array saved in the NT_PRPSINFO note. - The 'cwd' and 'exe' values are obtained from the per-process file descriptor table stored in the NT_PROCSTAT_FILES core note. - 'mappings' is implemented by walking the array of VM map entries stored in the NT_PROCSTAT_VMMAP core note. - 'status' output is generated by outputting fields from the first structure stored in the NT_PROCSTAT_PROC core note. - 'stat' is aliased to 'status'. gdb/ChangeLog: * fbsd-tdep.c (KVE_STRUCTSIZE, KVE_START, KVE_END, KVE_OFFSET) (KVE_FLAGS, KVE_PROTECTION, KVE_PATH, KINFO_VME_PROT_READ) (KINFO_VME_PROT_WRITE, KINFO_VME_PROT_EXEC, KINFO_VME_FLAG_COW) (KINFO_VME_FLAG_NEEDS_COPY, KINFO_VME_FLAG_NOCOREDUMP) (KINFO_VME_FLAG_SUPER, KINFO_VME_FLAG_GROWS_UP) (KINFO_VME_FLAG_GROWS_DOWN, KF_STRUCTSIZE, KF_TYPE, KF_FD) (KF_PATH, KINFO_FILE_TYPE_VNODE, KINFO_FILE_FD_TYPE_CWD) (KINFO_FILE_FD_TYPE_TEXT, SIG_WORDS, struct kinfo_proc_layout) (kinfo_proc_layout_32, kinfo_proc_layout_i386) (kinfo_proc_layout_64, fbsd_vm_map_entry_flags) (fbsd_core_info_proc_mappings, fbsd_core_vnode_path) (fbsd_core_fetch_timeval, fbsd_print_sigset) (fbsd_core_info_proc_status, fbsd_core_info_proc): New. (fbsd_init_abi): Install gdbarch "core_info_proc" method. * fbsd-tdep.h (fbsd_vm_map_entry_flags): New.	2018-01-09 13:35:17 -08:00
Joel Brobecker	e2882c8578	Update copyright year range in all GDB files ... gdb/ChangeLog: Update copyright year range in all GDB files	2018-01-02 07:38:06 +04:00
Yao Qi	ac7936dfd0	s/get_regcache_arch (regcache)/regcache->arch ()/g ... This patches removes get_regcache_arch, and use regache->arch () instead. The motivation of this change is that I am going to move some basic stuff into a base class of regcache. I don't need to update "client" code regcache->arch (). On the other hand, this patch shortens the code a little bit. gdb: 2017-10-25 Yao Qi <yao.qi@linaro.org> * aarch32-linux-nat.c (aarch32_gp_regcache_supply): Use regcache->arch () instead get_regcache_arch. * aarch64-fbsd-nat.c (aarch64_fbsd_fetch_inferior_registers): Likewise. (aarch64_fbsd_store_inferior_registers): Likewise. * aarch64-linux-nat.c (fetch_gregs_from_thread): Likewise. (store_gregs_to_thread): Likewise. (fetch_fpregs_from_thread): Likewise. (store_fpregs_to_thread): Likewise. * aarch64-tdep.c (aarch64_extract_return_value): Likewise. (aarch64_store_return_value): Likewise. (aarch64_software_single_step): Likewise. * aix-thread.c (aix_thread_wait): Likewise. (supply_reg32): Likewise. (supply_sprs64): Likewise. (supply_sprs32): Likewise. (fill_gprs64): Likewise. (fill_gprs32): Likewise. (fill_sprs64): Likewise. (fill_sprs32): Likewise. (store_regs_user_thread): Likewise. (store_regs_kernel_thread): Likewise. * alpha-bsd-nat.c (alphabsd_fetch_inferior_registers): Likewise. (alphabsd_store_inferior_registers): Likewise. * alpha-tdep.c (alpha_extract_return_value): Likewise. (alpha_store_return_value): Likewise. (alpha_deal_with_atomic_sequence): Likewise. (alpha_next_pc): Likewise. (alpha_software_single_step): Likewise. * amd64-bsd-nat.c (amd64bsd_fetch_inferior_registers): Likewise. (amd64bsd_store_inferior_registers): Likewise. * amd64-linux-nat.c (amd64_linux_fetch_inferior_registers): Likewise. (amd64_linux_store_inferior_registers): Likewise. * amd64-nat.c (amd64_supply_native_gregset): Likewise. (amd64_collect_native_gregset): Likewise. * amd64-obsd-tdep.c (amd64obsd_supply_uthread): Likewise. (amd64obsd_collect_uthread): Likewise. * amd64-tdep.c (amd64_supply_fpregset): Likewise. (amd64_collect_fpregset): Likewise. (amd64_supply_fxsave): Likewise. (amd64_supply_xsave): Likewise. (amd64_collect_fxsave): Likewise. (amd64_collect_xsave): Likewise. * arc-tdep.c (arc_write_pc): Likewise. * arch-utils.c (default_skip_permanent_breakpoint): Likewise. * arm-fbsd-nat.c (arm_fbsd_fetch_inferior_registers): Likewise. (arm_fbsd_store_inferior_registers): Likewise. * arm-linux-nat.c (fetch_vfp_regs): Likewise. (store_vfp_regs): Likewise. (arm_linux_fetch_inferior_registers): Likewise. (arm_linux_store_inferior_registers): Likewise. * arm-linux-tdep.c (arm_linux_supply_gregset): Likewise. (arm_linux_sigreturn_next_pc): Likewise. (arm_linux_get_next_pcs_syscall_next_pc): Likewise. * arm-nbsd-nat.c (arm_supply_gregset): Likewise. (fetch_register): Likewise. (store_register): Likewise. * arm-tdep.c (arm_is_thumb): Likewise. (displaced_in_arm_mode): Likewise. (bx_write_pc): Likewise. (arm_get_next_pcs_addr_bits_remove): Likewise. (arm_software_single_step): Likewise. (arm_extract_return_value): Likewise. (arm_store_return_value): Likewise. (arm_write_pc): Likewise. * bfin-tdep.c (bfin_extract_return_value): Likewise. * bsd-uthread.c (bsd_uthread_fetch_registers): Likewise. (bsd_uthread_store_registers): Likewise. * core-regset.c (fetch_core_registers): Likewise. * corelow.c (get_core_registers): Likewise. * cris-tdep.c (cris_store_return_value): Likewise. (cris_extract_return_value): Likewise. (find_step_target): Likewise. (find_step_target): Likewise. (cris_software_single_step): Likewise. * ctf.c (ctf_fetch_registers): Likewise. * darwin-nat.c (cancel_breakpoint): Likewise. * fbsd-tdep.c (fbsd_collect_thread_registers): Likewise. * frv-tdep.c (frv_extract_return_value): Likewise. * ft32-tdep.c (ft32_store_return_value): Likewise. (ft32_extract_return_value): Likewise. * go32-nat.c (fetch_register): Likewise. (go32_fetch_registers): Likewise. (go32_store_registers): Likewise. (store_register): Likewise. * h8300-tdep.c (h8300_extract_return_value): Likewise. (h8300_store_return_value): Likewise. * hppa-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (hppa_linux_fetch_inferior_registers): Likewise. (hppa_linux_store_inferior_registers): Likewise. * i386-darwin-nat.c (i386_darwin_fetch_inferior_registers): Likewise. (i386_darwin_store_inferior_registers): Likewise. * i386-gnu-nat.c (gnu_fetch_registers): Likewise. (gnu_store_registers): Likewise. * i386-linux-nat.c (fetch_register): Likewise. (store_register): Likewise. (supply_gregset): Likewise. (fill_gregset): Likewise. (i386_linux_fetch_inferior_registers): Likewise. (i386_linux_store_inferior_registers): Likewise. (i386_linux_resume): Likewise. * i386-linux-tdep.c (i386_linux_get_syscall_number_from_regcache): Likewise. * i386-nto-tdep.c (i386nto_supply_gregset): Likewise. * i386-obsd-nat.c (i386obsd_supply_pcb): Likewise. * i386-obsd-tdep.c (i386obsd_supply_uthread): Likewise. (i386obsd_collect_uthread): Likewise. * i386-tdep.c (i386_mmx_regnum_to_fp_regnum): Likewise. (i386_supply_gregset): Likewise. (i386_collect_gregset): Likewise. (i386_supply_fpregset): Likewise. (i386_collect_fpregset): Likewise. (i386_mpx_bd_base): Likewise. * i386-v4-nat.c (supply_fpregset): Likewise. (fill_fpregset): Likewise. * i387-tdep.c (i387_supply_fsave): Likewise. (i387_collect_fsave): Likewise. (i387_supply_fxsave): Likewise. (i387_collect_fxsave): Likewise. (i387_supply_xsave): Likewise. (i387_collect_xsave): Likewise. * ia64-linux-nat.c (ia64_linux_fetch_registers): Likewise. (ia64_linux_store_registers): Likewise. * ia64-tdep.c (ia64_access_rse_reg): Likewise. (ia64_extract_return_value): Likewise. (ia64_store_return_value): Likewise. (find_func_descr): Likewise. * inf-child.c (inf_child_fetch_inferior_registers): Likewise. * inf-ptrace.c (inf_ptrace_fetch_registers): Likewise. (inf_ptrace_store_registers): Likewise. * infrun.c (use_displaced_stepping): Likewise. (displaced_step_prepare_throw): Likewise. (resume): Likewise. (proceed): Likewise. (do_target_wait): Likewise. (adjust_pc_after_break): Likewise. (handle_inferior_event_1): Likewise. (handle_signal_stop): Likewise. (save_infcall_suspend_state): Likewise. (restore_infcall_suspend_state): Likewise. * iq2000-tdep.c (iq2000_extract_return_value): Likewise. * jit.c (jit_frame_prev_register): Likewise. * linux-nat.c (save_stop_reason): Likewise. (linux_nat_wait_1): Likewise. (resume_stopped_resumed_lwps): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (record_linux_system_call): Likewise. * linux-tdep.c (linux_collect_thread_registers): Likewise. * lm32-tdep.c (lm32_extract_return_value): Likewise. (lm32_store_return_value): Likewise. * m32c-tdep.c (m32c_read_flg): Likewise. (m32c_pseudo_register_read): Likewise. (m32c_pseudo_register_write): Likewise. * m32r-linux-tdep.c (m32r_linux_supply_gregset): Likewise. (m32r_linux_collect_gregset): Likewise. * m32r-tdep.c (m32r_store_return_value): Likewise. (m32r_extract_return_value): Likewise. * m68k-bsd-nat.c (m68kbsd_supply_fpregset): Likewise. (m68kbsd_collect_fpregset): Likewise. * m68k-bsd-tdep.c (m68kbsd_supply_fpregset): Likewise. * m68k-linux-nat.c (fetch_register): Likewise. (old_fetch_inferior_registers): Likewise. (old_store_inferior_registers): Likewise. (store_regs): Likewise. * m68k-tdep.c (m68k_svr4_extract_return_value): Likewise. (m68k_svr4_store_return_value): Likewise. * m88k-tdep.c (m88k_store_arguments): Likewise. * mi/mi-main.c (mi_cmd_data_list_changed_registers): Likewise. (mi_cmd_data_write_register_values): Likewise. * mips-fbsd-nat.c (mips_fbsd_fetch_inferior_registers): Likewise. (mips_fbsd_store_inferior_registers): Likewise. * mips-fbsd-tdep.c (mips_fbsd_supply_fpregs): Likewise. (mips_fbsd_supply_gregs): Likewise. (mips_fbsd_collect_fpregs): Likewise. (mips_fbsd_collect_gregs): Likewise. (mips_fbsd_supply_fpregset): Likewise. (mips_fbsd_collect_fpregset): Likewise. (mips_fbsd_supply_gregset): Likewise. (mips_fbsd_collect_gregset): Likewise. * mips-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (supply_fpregset): Likewise. (fill_fpregset): Likewise. * mips-linux-tdep.c (mips_supply_gregset): Likewise. (mips_fill_gregset): Likewise. (mips_supply_fpregset): Likewise. (mips_fill_fpregset): Likewise. (mips64_supply_gregset): Likewise. (micromips_linux_sigframe_validate): Likewise. * mips-nbsd-nat.c (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_fetch_inferior_registers): Likewise. (mipsnbsd_store_inferior_registers): Likewise. * mips-nbsd-tdep.c (mipsnbsd_supply_fpregset): Likewise. (mipsnbsd_supply_gregset): Likewise. (mipsnbsd_iterate_over_regset_sections): Likewise. (mipsnbsd_supply_reg): Likewise. (mipsnbsd_supply_fpreg): Likewise. * mips-tdep.c (mips_in_frame_stub): Likewise. (mips_dummy_id): Likewise. (is_octeon_bbit_op): Likewise. (micromips_bc1_pc): Likewise. (extended_mips16_next_pc): Likewise. (mips16_next_pc): Likewise. (deal_with_atomic_sequence): Likewise. * moxie-tdep.c (moxie_process_readu): Likewise. * nios2-tdep.c (nios2_get_next_pc): Likewise. * nto-procfs.c (procfs_store_registers): Likewise. * ppc-fbsd-nat.c (ppcfbsd_fetch_inferior_registers): Likewise. (ppcfbsd_store_inferior_registers): Likewise. * ppc-linux-nat.c (fetch_vsx_register): Likewise. (fetch_altivec_register): Likewise. (get_spe_registers): Likewise. (fetch_spe_register): Likewise. (fetch_altivec_registers): Likewise. (fetch_all_gp_regs): Likewise. (fetch_all_fp_regs): Likewise. (store_vsx_register): Likewise. (store_altivec_register): Likewise. (set_spe_registers): Likewise. (store_spe_register): Likewise. (store_altivec_registers): Likewise. (store_all_gp_regs): Likewise. (store_all_fp_regs): Likewise. * ppc-linux-tdep.c (ppc_linux_supply_gregset): Likewise. (ppc_linux_collect_gregset): Likewise. (ppc_canonicalize_syscall): Likewise. (ppc_linux_record_signal): Likewise. (ppu2spu_prev_register): Likewise. * ppc-nbsd-nat.c (ppcnbsd_supply_pcb): Likewise. * ppc-obsd-nat.c (ppcobsd_fetch_registers): Likewise. (ppcobsd_store_registers): Likewise. * ppc-ravenscar-thread.c (ppc_ravenscar_generic_fetch_registers): Likewise. (ppc_ravenscar_generic_store_registers): Likewise. * procfs.c (procfs_fetch_registers): Likewise. (procfs_store_registers): Likewise. * ravenscar-thread.c (ravenscar_fetch_registers): Likewise. (ravenscar_store_registers): Likewise. (ravenscar_prepare_to_store): Likewise. * record-btrace.c (record_btrace_fetch_registers): Likewise. * record-full.c (record_full_wait_1): Likewise. (record_full_registers_change): Likewise. (record_full_store_registers): Likewise. (record_full_core_fetch_registers): Likewise. (record_full_save): Likewise. (record_full_goto_insn): Likewise. * regcache.c (regcache_register_size): Likewise. (get_regcache_arch): Remove. (regcache_read_pc): Likewise. * regcache.h (get_regcache_arch): Remove. * remote-sim.c (gdbsim_fetch_register): Likewise. (gdbsim_store_register): Likewise. * remote.c (fetch_register_using_p): Likewise. (send_g_packet): Likewise. (remote_prepare_to_store): Likewise. (store_registers_using_G): Likewise. * reverse.c (save_bookmark_command): Likewise. (goto_bookmark_command): Likewise. * rs6000-aix-tdep.c (branch_dest): Likewise. * rs6000-nat.c (rs6000_ptrace64): Likewise. (fetch_register): Likewise. * rs6000-tdep.c (ppc_supply_reg): Likewise. (ppc_collect_reg): Likewise. (ppc_collect_gregset): Likewise. (ppc_collect_fpregset): Likewise. (ppc_collect_vsxregset): Likewise. (ppc_collect_vrregset): Likewise. (ppc_displaced_step_hw_singlestep): Likewise. (rs6000_pseudo_register_read): Likewise. (rs6000_pseudo_register_write): Likewise. * s390-linux-nat.c (supply_gregset): Likewise. (fill_gregset): Likewise. (s390_linux_fetch_inferior_registers): Likewise. * s390-linux-tdep.c (s390_write_pc): Likewise. (s390_software_single_step): Likewise. (s390_all_but_pc_registers_record): Likewise. (s390_linux_syscall_record): Likewise. * sentinel-frame.c (sentinel_frame_prev_arch): Likewise. * sh-nbsd-nat.c (shnbsd_fetch_inferior_registers): Likewise. (shnbsd_store_inferior_registers): Likewise. * sh-tdep.c (sh_extract_return_value_nofpu): Likewise. (sh_extract_return_value_fpu): Likewise. (sh_store_return_value_nofpu): Likewise. (sh_corefile_supply_regset): Likewise. (sh_corefile_collect_regset): Likewise. * sh64-tdep.c (sh64_extract_return_value): Likewise. (sh64_store_return_value): Likewise. * sparc-linux-tdep.c (sparc32_linux_collect_core_fpregset): Likewise. * sparc-nat.c (sparc_fetch_inferior_registers): Likewise. (sparc_store_inferior_registers): Likewise. * sparc-ravenscar-thread.c (register_in_thread_descriptor_p): Likewise. (sparc_ravenscar_prepare_to_store): Likewise. * sparc-tdep.c (sparc32_store_arguments): Likewise. (sparc_analyze_control_transfer): Likewise. (sparc_step_trap): Likewise. (sparc_software_single_step): Likewise. (sparc32_gdbarch_init): Likewise. (sparc_supply_rwindow): Likewise. (sparc_collect_rwindow): Likewise. * sparc64-linux-tdep.c (sparc64_linux_collect_core_fpregset): Likewise. * sparc64-nbsd-nat.c (sparc64nbsd_supply_gregset): Likewise. (sparc64nbsd_collect_gregset): Likewise. (sparc64nbsd_supply_fpregset): Likewise. (sparc64nbsd_collect_fpregset): Likewise. * sparc64-tdep.c (sparc64_store_arguments): Likewise. (sparc64_supply_gregset): Likewise. (sparc64_collect_gregset): Likewise. (sparc64_supply_fpregset): Likewise. (sparc64_collect_fpregset): Likewise. * spu-linux-nat.c (spu_fetch_inferior_registers): Likewise. * spu-tdep.c (spu_unwind_sp): Likewise. (spu2ppu_prev_register): Likewise. (spu_memory_remove_breakpoint): Likewise. * stack.c (return_command): Likewise. * tic6x-tdep.c (tic6x_extract_signed_field): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (trace_save_ctf): Likewise. * windows-nat.c (do_windows_fetch_inferior_registers): Likewise. (do_windows_store_inferior_registers): Likewise. (windows_resume): Likewise. * xtensa-linux-nat.c (fill_gregset): Likewise. (supply_gregset_reg): Likewise. * xtensa-tdep.c (xtensa_register_write_masked): Likewise. (xtensa_register_read_masked): Likewise. (xtensa_supply_gregset): Likewise. (xtensa_extract_return_value): Likewise. (xtensa_store_return_value): Likewise.	2017-10-25 16:37:03 +01:00
John Baldwin	a181c0bf74	Use gdbarch_long_bit to determine layout of FreeBSD siginfo_t. ... FreeBSD architectures are either ILP32 or LP64 resulting in two different layouts for siginfo_t. Previously, the 'bits_per_word' member of bfd_arch_info was used to determine the layout to use for a given FreeBSD architecture. However, mipsn32 architectures inherit from a 64-bit mips architecture where bits_per_word is 64. As a result, $_siginfo was not properly extracted from FreeBSD/mipsn32 core dumps. Fix this by using gdbarch_long_bit instead of 'bits_per_word' to determine if a FreeBSD architecture is ILP32 or LP64. gdb/ChangeLog: * fbsd-nat.c (fbsd_siginfo_size): Use gdbarch_long_bit. (fbsd_convert_siginfo): Likewise. * fbsd-tdep.c (fbsd_core_xfer_siginfo): Likewise.	2017-10-09 09:54:42 -07:00